Не могу установить плагины в waves central в пакет Waves complete ( FL studio)
5 Гб) на жесткий диск с образа и у меня пошла установка
Мне помогли установить вот эти рекомендации:
Удалите папку Cash из установочной папки
*Все запуски установок, кидженов, патчеров делаются от имени администратора при любой установке и активации. Нигде и никакие папки откудакуда будет вестись установка на всем пути, по всему адресу, не должны содержать кириллистических знаков (исключения — системные папки типа Пользователи). Также, имя компьютера и учетная запись должны быть на латинице. В системе вы должны находится на правах администратора. В системе по умолчанию и без обсуждений для этих плагинов у вас должны быть установлены Microsoft Visual C++ 2005-2008-2010-2012-2013-2015-2017. Не нужно создавать матрешки из 15 папок и качать туда. Из-за длинных имен файлов папок будет ошибка при установке. Качайте в корень диска.
Удалить предыдущую версию. Очистить систему от всех оставшихся папок и все записи в реестре.
(C:Program FilesCommon FilesVST3 — WaveShell1-VST3…
C:Program FilesVSTPlugins — WaveShell1-VST…
C:Program Files (x86)Common FilesVST3 — WaveShell1-VST3…
C:Program Files (x86)Common Files — WPAPI
C:Program Files (x86)VstPlugins — WaveShell1-VST…
C:Program Files (x86) — Waves, Waves Central
C:UsersИМЯ — .Waves Central
C:UsersИМЯAppDataLocal — Waves Audio
C:UsersИМЯAppDataRoaming — Waves Audio
C:UsersPublic — Waves Audio)
Источник
Error while loading the sample library waves
I hope I can get some help with this annoying problem.
In Waves Central I saw that most of my Waves plugins needed to be updated, so I figured I would hit ‘update’ today. Waves Central then updated them.
The problem is that I have a project I’m mixing for someone, with a ton of waves plugins, mostly vst3.
But after today’s update Reaper tells me, when opening Reaper, that almost all of the vst3 plugins used in the project are missing, and it gives me the long list.
I know that every time I get a new Waves plugin, I need to do a complete vst re-scan in Reaper. I have done so this time, but it doesn’t change anything.
It’s important to point out that all Waves plugins do show up in the fx browser, but the vst3 ones are missing in the sense that they are «asleep».
They don’t load on the various tracks during start up.
And even though it says it «preserves effect configuration», if I click ‘replace’ and find the Waves vst3 in question, the plugin just loads at it’s default settings.
I’ve tried copying the WaveShell1-VST3 9.92.vst3 file to my standard vst folder, but doesn’t change anything.
The problem is ONLY with vst3’s, and not all. I think only the ones that were updated today in Waves Central, which is almost all of them.
But for instance the L1 maximizer vst3 loads fine in my project, perhaps because this old plugin was one of the few not affected by today’s update in Waves Central.
Any help would be GREATLY appreciated, as I spent a lot of time tweaking the settings on these plugins!
Richie I appreciate your reply, but I have done that complete re-scan (many times now). you have to do it every time you get a new Waves plugin. But that doesn’t fix this particular problem. I too thought it would fix it, it was my first thought, but nope. Very frustrating.
As pointed out, the problem is not that the vst3s don’t show up in the fx browser. They do. So you can say that Reaper technically does *find* all the vsts and vsts3. They wouldn’t be available to me if I simply needed to do a complete re-scan.
But for some reason, Reaper cannot understand that these are the same plugins as those used on my tracks in my existing projects. Even though the names of these sleeping/missing plugins on the track are completely identical to those available in the fx brower.
Only the few Waves plugins *not* updated yesterday in Waves Central show up as they should on the tracks. Reaper understands that these are the same plugins as before the update.
All the rest are «missing» as Reaper calls it when loading the project, they are ‘asleep’ on the tracks with the little sleep icon, and need to be replaced.
When I then try to replace them, clicking ‘replace’ plugin, even when picking the exact corresponding vst3 plugin all perfectly available in the fx browser, it just loads them with the default settings, not preserving any of the mixing choices I had made. Even if this ‘replace’ thing worked, it wouldn’t be a good solution though, as I would have to do this when going back to every single old project I have ever done.
I badly need Reaper to be able to find these correct plugins during startup, or rather. I need Reaper to understand that these are the same plugins as the ones on my tracks, so that they become available ON the tracks with the settings last used like they should.
This is unfortunately one of the little foibles of Waves. Because hey use waveshell as a container for their plugins, Reaper is unable to either detect any changes that do not require a new version of the relevant Waveshell or in the case of old plugins that work OK and then die because the waveshell containing them HAS changed, even if the plugin hasn’t. Which means that unless you do full CLEAR and re-scan every time something like this shows u, your existing settings will indeed get lost if you re-load the «same» plugin from the «same» location, because Waves have actually changed it but not changed the name.
Pain in the ASS, aint it?
Make 100% sure that you are using the CLEAR AND RE_SCAN, not just rescan option, too.
This is unfortunately one of the little foibles of Waves. Because hey use waveshell as a container for their plugins, Reaper is unable to either detect any changes that do not require a new version of the relevant Waveshell or in the case of old plugins that work OK and then die because the waveshell containing them HAS changed, even if the plugin hasn’t. Which means that unless you do full CLEAR and re-scan every time something like this shows u, your existing settings will indeed get lost if you re-load the «same» plugin from the «same» location, because Waves have actually changed it but not changed the name.
Pain in the ASS, aint it?
Make 100% sure that you are using the CLEAR AND RE_SCAN, not just rescan option, too.
Hi Ivan, I have done this. It was my very first thought as soon as I saw the list of missing plugins, I assumed it would fix it. It makes no difference.
If you don’t do a complete rescan (clear cache) you don’t see the plugins in the fx list at all.
I see all the plugins with their correct names in the list. But Reaper doesn’t understand that these VSTs are the exact same ones that are in my projects, are thus doesn’t load them.
I really hope someone knows the answer to this problem.
Источник
Error while loading the sample library waves
Waves — Complete 14 v12.09.22 VST, VST3, AAX, AU x64 R2R [15.09.2022]
Дата Выпуска: 15.09.2022
Версия: v12.09.22
Разработчик: Waves
Сайт разработчика: waves.com/v14
Формат: VST, VST3, AAX, AU
Разрядность: 64bit
Таблэтка: присутствует R2R
Системные требования: CPU Intel Core i3 / i5 / i7 / Xeon / AMD Quad-Core
Apple Silicone M1 / M1 Pro / M1 Max
Memory 8 GB RAM 8 GB free disk space on the system drive
Operating System:Windows 10 64 bit (version 2004 and above)
Screen Resolution Minimum: 1024×768 Recommended: 1280×1024 / 1600×1024
Размер: 4.84 GB
Waves — ведущий мировой разработчик аудиоплагинов и сигнальных процессоров для аудиорынков профессиональной и бытовой электроники.
Что нового в V14
• Новое: ручки Mix и Trim добавлены к нашим самым популярным компрессорам.
Получите лучший динамический контроль, быстро, в API 2500, CLA-2A, CLA-3A, CLA-76, R-Comp и SSL G-Master Buss Compressor
• Новое: более быстрая загрузка.
Улучшено время загрузки плагинов, пресетов и сессий в вашей DAW.
• Новое: рабочий процесс быстрого перетаскивания пресетов.
Загружайте пресеты быстрее благодаря новому рабочему процессу перетаскивания
• Новое: графика HiDPI для некоторых плагинов.
Эквалайзеры Abbey Road TG Mastering, API Collection, CLA-2A, CLA-3A, CLA-76, F6, OVox и PuigTec теперь со сверхчетким графическим интерфейсом HiDPI
• Новое: отдельное приложение для Creative Sampler CR8.
Формируйте, манипулируйте и воспроизводите свои сэмплы без DAW
• Новое: дополнительные улучшения.
• Новые пресеты, улучшения и дополнительные обновления. Полный список обновлений см.
Ускорьте свой рабочий процесс с помощью новых ручек Mix и Trim
Настраивайте динамику быстрее, чем когда-либо, с помощью новых ручек Trim и Mix для компрессоров API 2500, CLA-2A, CLA-3A, CLA-76, R-Comp и SSL G-Master. Теперь вы можете сохранять творческий подход, быстро балансируя громкость и создавая параллельное сжатие за считанные секунды прямо из вашего плагина.
Что нового в v.12.09.22
• Новое обновление: теперь доступна Clarity Vx v14.
• Новое обновление: теперь доступна Clarity Vx Pro v14 со следующими новыми функциями:
6 полос (вместо 4) для большей мощности и точности.
• Встроенный ограничитель для обработки отсечения при выполнении восстановления и улучшения.
• Функция автоматического сброса, которая повышает надежность нейронной сети и экономит время за счет снижения потребности в автоматизации пользователя в тех случаях, когда плагину необходимо обрабатывать постоянно меняющиеся шумы или голоса.
• Не требуется установки Waves Central
входа в учетную запись.
• Упрощено и намного быстрее
установка/удаление.
• Библиотеки инструментов не включены.
Проверьте наши другие выпуски.
• Гораздо быстрее и более ресурсоемкий
с нашей технологией эмуляции.
Прочтите R2R.txt перед всем
ПРИМЕЧАНИЕ 1: новый кряк V14 от VR.
не имеет решения для КОСМОС
требуя вход в систему. Пользователям по-прежнему нужно
для создания учетной записи Waves и авторизации.
Автономная установка невозможна.
ПРИМЕЧАНИЕ 2. Приложение V13, такое как SuperRack, позволяющее пользователям загружать неподдерживаемые
плагины выдает ошибку. Вылетает и больше не запускается, пока вы не убьете проблемный пресет.
Очистите %PUBLIC%Waves Audio, когда возникает такая проблема
Релиз Waves Complete 2022.09.12
Запустите включенный «R2R_Kill_Waves_Background_Process.cmd».
Убедитесь, что COSMOS.exe, WavesLocalServer.exe, WavesPluginServer.exe не запущены.
Удалите предыдущую версию.
Удалите Waves Central.
Чистые пути:
Ваш каталог плагинов VST2, VST3, AAX
C:Program Files (x86)Waves
%PROGRAMFILES%Waves Central
%PROGRAMDATA%Waves Audio
%APPDATA%КОСМОС
%APPDATA%Waves Audio
%LOCALAPPDATA%Waves Audio
%PUBLIC%Waves Audio
=> Если вы думаете, что у вас нет опыта, найдите «WaveShell*» на диске C, а затем удалите все.
=> Мы всегда видим, что у людей возникают проблемы со старыми оболочками, которые следует удалить раньше.
Чистый реестр:
HKEY_LOCAL_MACHINESOFTWAREWOW6432NodeWaves
Google «Распространяемый пакет Microsoft Visual C++», загрузите с сайта Microsoft и установите/обновите:
Распространяемый пакет Microsoft Visual C++ 2012 x86 и x64
Распространяемый пакет Microsoft Visual C++ 2013 x64
Распространяемый пакет Microsoft Visual C++ 2015–2022 x64
Среда выполнения Microsoft Edge WebView2 (используется семплером CR8)
Установить волны
————————————————— —————————————————
Запускаем нашу установку и устанавливаем.
Если вам нужен NKS, вам также нужно установить VST2. Не забудьте добавить путь VST2 в Komplete Kontrol.
Сканируйте или пересканируйте плагины из вашей DAW. Если вы обновились, рекомендуется выполнить полное повторное сканирование.
Если вы используете инструменты на основе образцов, найдите путь к инструментам от запуска приложения или графического интерфейса.
Примеры выпусков библиотек (в настоящее время большинство из них также можно загрузить с официального сайта Waves):
Waves.Bass.Fingers.Library.HD.v1.0-R2R
Waves.Bass.Fingers.Library.SD.v1.0-R2R
Waves.Bass.Slapper.Library.HAPPY.NEW.YEAR-R2R
Waves.Clavinet.Library-R2R
Waves.Electric.88.Library-R2R
Waves.Electric.200.Library-R2R
Waves.Electric.G80.Library-R2R
Waves.Grand.Rhapsody.Library.HD.v1.0-R2R
Waves.Grand.Rhapsody.Library.SD.v1.0-R2R
Waves.Sample.Libraries.Factory.Pack.v1.0.3.5-R2R (это запрашивает Sampler CR8)
Перезапуск фоновых серверов Waves
————————————————— —————————————————
Это полезно, когда фоновый процесс делает что-то не так.
Когда фоновые серверы работают неправильно, возникает следующая проблема.
* Ошибка сканирования плагинов (WaveShells возвращает 0 плагинов)
* Предустановленный браузер не работает
* COSMOS (также в браузере CR8 Sampler) не запускается или завершает работу без ошибки лицензии
Источник
Ошибка error while loading shared libraries
Новые и опытные пользователи Linux могут сталкиваться с ошибкой error loading shared libraries во время запуска программ, также с ней могут сталкиваться программисты и все желающие компилировать программное обеспечение в своей системе. Эта ошибка в дословном переводе означает что возникла проблема во время загрузки общей библиотеки. О том что такое библиотеки и зачем они нужны вы можете узнать из статьи библиотеки Linux.
В этой же статье мы рассмотрим что значит ошибка error while loading shared libraries более подробно, а главное, как ее решить.
Что означает error while loading shared libraries?
Даже если вы не компилируете свои программы, то вы можете увидеть ошибку error while loading shared libraries: имя_библиотеки: cannot open shared object file: No such file or directory достаточно часто во время установки новых программ не через пакетный менеджер или программ, предназначенных для другого дистрибутива. Как я уже говорил, она возникает потому, что система не может найти библиотеку.
А вот почему ее нельзя найти и загрузить, это уже интересно. Этому может быть несколько причин:
- Библиотека не установлена в системе;
- Библиотека установлена, но неизвестно куда;
- Библиотека установлена правильно, но имеет не ту версию.
При решении проблемы мы будем руководствоваться именно этими причинами и пытаться их решить.
Как исправить ошибку?
1. Библиотека не установлена
Первый вариант, тут все понятно, библиотеки просто нет в системе, поэтому мы и получаем такую ошибку. Верный способ ее решения — просто найти пакет библиотеки с помощью пакетного менеджера и установить ее. Обычно, пакеты с библиотеками называются так же, как и сами библиотеки с префиксом lib.
Например, если нам не хватает библиотеки libfuse2.so, то мы можем найти ее в Ubuntu такой командой:
sudo apt search libfuse2
Затем осталось только установить ее:
sudo apt install libfuse2
Если перед вами стоит задача собрать программу из исходников, то вам понадобится не только установить саму библиотеку, но и заголовочные файлы для нее:
sudo apt install libfuse-dev
И так для любой библиотеки. Но это не всегда помогает.
2. Библиотека находится не в том каталоге
Бывает что библиотека установлена, мы установили ее или она поставлялась вместе с программой, но ошибка как была, так и есть. Причиной этому может быть то, что загрузчик Linux не может найти библиотеку.
Поиск библиотек выполняется по всех папках, которые указаны в конфигурационных файлах /etc/ld.conf.d/. По умолчанию, это такие каталоги, как /usr/lib, /lib, /usr/lib64, /lib64. Если библиотека установлена в другой каталог, то, возможно, это и есть причина проблемы.
Вы можете посмотреть какие библиотеки сейчас доступны загрузчику с помощью команды:
Найти, где находится ваша библиотека можно с помощью команды locate. Например, нас интересует библиотека librtfreader.so:
Теперь мы знаем, что она находится по адресу /opt/kingsoft/wps-office/office6/. А значит, для работы программы необходимо сделать чтобы загрузчик библиотек ее видел. Для этого можно добавить путь в один из файлов /etc/ld.so.conf.d/ или же в переменную LD_LIBRARY_PATH:
Опять же, так вы можете поставить с любой библиотекой, которая взывает ошибку. Еще один более простой метод — это просто создать символическую ссылку на нужную библиотеку в правильной папке:
ln -s /opt/kingsoft/wps-office/office6/librtfreader.so /usr/lib/librtfreader.so
3. Неверная версия библиотеки
Эта причина ошибки довольно часто встречается при использовании программ не для вашего дистрибутива. Каждая библиотека имеет дополнительную версию, так называемую ревизию, которая записывается после расширения .so. Например, libav.so.1. Так вот, номер версии меняется всякий раз, когда в библиотеку вносятся какие-либо исправления.
Часто возникает ситуация, когда в одном дистрибутиве программа собирается с зависимостью от библиотеки, например, libc.so.1, а в другом есть только libc.so.2. Отличия в большинстве случаев здесь небольшие и программа могла бы работать на второй версии библиотеки. Поэтому мы можем просто создать символическую ссылку на нее.
Например, библиотеки libusb-1.0.so.1 нет. Но зато есть libusb-1.0.so.0.1, и мы можем ее использовать:
Для этого просто создаем символическую ссылку на библиотеку:
sudo ln -s /usr/lib/libusb-1.0.so.0.1 /usr/lib/libusb-1.0.so.1
В большинстве случаев программа не заметит подмены и будет работать, как и ожидалось. Также для решения этой проблемы можно попытаться найти нужную версию библиотеки в интернете для своей архитектуры и поместить ее в папку /usr/lib/ или /usr/lib64/. Но после этого желательно обновить кэш:
Выводы
В этой статье мы рассмотрели почему возникает ошибка Error while loading shared libraries, а также как ее решить. В большинстве случаев проблема решается довольно просто и вы получите работоспособную программу. Надеюсь, эта информация была полезной для вас.
Источник
Limited Time Only: Buy 2 plugins get 2 FREE Limited Time: Buy 2 plugins get 2 FREE | Shop Now
3758b9b5-045c-4b7d-b020-80f9b068d990
07:10 AM EST
Log in to see your personal recommendations
9
2
2023
14
25
31
12b45c2a-b434-47e7-9fbb-1dd33cafb1a3
30
80
0
grid-view
False
False
False
40
900
PRODUCTION
voTekqO2wEJBRRQbsEWTHeJEaV5FbTWvet3JZATG
b705eb6e-5be8-46d1-a9e3-8fbf47be7a04
False
False
False
False
false
https://img.wavescdn.com
href src content data-original
True
d2ntW2B8vSS_JJsTlb_VTw
6LeG-IcUAAAAAIb42eguHdUztlZNcrLPhuk81WSM
6LftoDMUAAAAAC9QpaYXNehGHSu__XxRJyFAIgkJ
6LeIxAcTAAAAAJcZVRqyHh71UMIEGNQ_MXjiZKhI
30
#000000
#fff
#fff
#000
#e8e8e8
Last updated on: 12/27/2017 2:39:10 AM
To play some instruments such as Grand Rhapsody Piano or Bass Slapper, you must download and install at least one of the sample libraries (HD or SD) in addition to the plugin/application. Other Waves instruments are installed with their SD sample library by default.
Possible error message
When launching the instrument, you are prompted to Locate [instrument name] Samples Folder. Not directing to a sample folder results in the instrument showing the following error: “[instrument name] encountered an error during the samples loading”.
Downloading and installing sample libraries
To download the sample libraries to a locatable folder, please refer to the Sample Libraries for Waves Instruments download page and follow the instructions there.
Was this article helpful?
Thanks for your feedback!
https://register.waves.com
2023-02-07 04:59 AM EST
[{«slot»:»6″,»codeName»:»ProductPageAlsoBought5050″, «testType»:»0″, «variations»: «off:50, waves:50», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»7″,»codeName»:»ListRecs9901″, «testType»:»0″, «variations»: «wavesrecs:99 , waves:1», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»8″,»codeName»:»ListRecommendedBadge», «testType»:»0″, «variations»: «yes:50, no:50», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»9″,»codeName»:»CartPopupFree9811″, «testType»:»0″, «variations»: «yes:1, no:98, strip:1», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»10″,»codeName»:»CartSkipStepYesRemove», «testType»:»0″, «variations»: «yes:50,yes-remove:50», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»21″,»codeName»:»ListGrid», «testType»:»0″, «variations»: «list:50, grid:50», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»22″,»codeName»:»ProductPageSelectedVideo», «testType»:»0″, «variations»: «one:50, two:50», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»23″,»codeName»:»PersonalDealsOnlyWaves», «testType»:»0″, «variations»: «on:0, off:100», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»24″,»codeName»:»NeoWizeMaster», «testType»:»0″, «variations»: «on:95, off:5», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»25″,»codeName»:»HomepageAB2″, «testType»:»0″, «variations»: «top10show:90, top10hide:10», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»26″,»codeName»:»BFPostFree22″, «testType»:»0″, «variations»: «on:1, off:99», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»27″,»codeName»:»CartPopupFreePluginNYS», «testType»:»0″, «variations»: «on:50, off:50», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»28″,»codeName»:»CouponAutoApply1″, «testType»:»1″, «variations»: «yes:50, no:50», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»29″,»codeName»:»WUPMultiYearClose», «testType»:»0″, «variations»: «on:1, off:99», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»30″,»codeName»:»CartFreePluginConfirmation», «testType»:»0″, «variations»: «on:50, off:50», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»31″,»codeName»:»CartFreePluginConfirmationMultiTier9010″, «testType»:»0″, «variations»: «on:90, off:10», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»38″,»codeName»:»UndoInCart», «testType»:»0″, «variations»: «on:50, off:50», «isActive»: «False»,»masterSlotID»:»0″},{«slot»:»39″,»codeName»:»AddToCartFlow9901″, «testType»:»0″, «variations»: «popup:99, page:1», «isActive»: «True»,»masterSlotID»:»0″},{«slot»:»40″,»codeName»:»TopMenuSpecials», «testType»:»0″, «variations»: «middle:50,right:50», «isActive»: «False»,»masterSlotID»:»0″} ]
[ { «ItemID» : 7, «BannerImage» : «/1lib/images/banners/my-offers/buy-2-get-2-feb23-1.jpg», «BannerTitle» : «Buy 2 plugins get 2 FREE», «BannerURL» : «/specials», «GAValue» : «buy-2-get-2-feb23» }, { «ItemID» : 3, «BannerImage» : «/1lib/images/banners/my-offers/buy-2-get-2-feb23-2.jpg», «BannerTitle» : «Choose from 100 free plugins», «BannerURL» : «/free-plugins-feb-2023», «GAValue» : «buy-2-get-2-feb23» }, { «ItemID» : 11, «BannerImage» : «/1lib/images/banners/my-offers/v14-july22-1.jpg», «BannerTitle» : «Waves V14: The New Version of Waves Plugins is Here», «BannerURL» : «/v14», «GAValue» : «v14-jul22» }, { «ItemID» : 10, «BannerImage» : «/1lib/images/banners/my-offers/v14-july22-2.jpg», «BannerTitle» : «Upgrade Your Way to V14: Get the latest plugin versions when you», «BannerURL» : «/account/upgrades», «GAValue» : «v14-jul22» }, { «ItemID» : 9, «BannerImage» : «/1lib/images/banners/my-offers/40pc-clarity-6.jpg», «BannerTitle» : «Are you an influencer? We want YOU – Find out more», «BannerURL» : «/influencer-form», «GAValue» : «influencer-signup» } ]
Forum Jump
Posted on Sun, May 03 2020 12:35 by C_v_K Joined on Fri, Apr 19 2019, Posts 6 |
||
Hi all , i have a problem with the Waves Grand Rhapody plugin. and the problem is, that it won’t load the samples of the waves sample library (HD/SD) into the plugin when inserted in VI Ensemble Pro 7. And this is also with the Waves Clavinet. They won’t load the samples. Anybody uses these plugins in Ensemble, and is this working for you? And how can i access these samples so that they load in Grand Rhapsody/Clavinet ? Tags: Waves Grand Rhapsody not loading samples |
||
|
Tags: Waves Grand Rhapsody not loading samples |
|
Posted on Thu, Aug 25 2022 16:39 by beatpete Joined on Thu, Oct 01 2009, Posts 98 |
||
I have this problem as well. Waves Grand Rhapsody opens fine in other hosts but not in VEP, it just says (samples not loaded». Any ideas? Comp1: Windows 10 64 bit,AMD 3950x 32 core, 64gb ram,, Radeon HD5450 graphics, RME Digiface, Steinberg UR824 and MR816x (X2) |
||
|
||
Posted on Fri, Aug 26 2022 10:44 by Paul Joined on Sat, Aug 03 2002, Vienna, Posts 13655 |
||
Hi, Thanks for posting. VE Pro is «only» a host, so it doesn’t have to do anything with the loading process of the inserted plug-ins. My colleagues at Waves have VE Pro to test… Did you get in touch with them already? Best, Paul Kopf |
||
|
||
Posted on Wed, Feb 01 2023 16:17 by C_v_K Joined on Fri, Apr 19 2019, Posts 6 |
||
Yeah i figured out, see reply to Paul |
||
|
||
Posted on Wed, Feb 01 2023 16:23 by C_v_K Joined on Fri, Apr 19 2019, Posts 6 |
||
Yeah indeed, figured out long time ago. because it’s a host you can load the vsti on it’s own, but won’t do anything ( as far samples loading ). You also need to open the main DAW you are going to use for the writing/building your music. And make the connection with the Vienna server. If you use Vienna standalone then it also loads the samples |
||
|
||
You cannot post new threads in this forum.
You cannot reply to threads in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.