Input output error during read on dev sda linux

ошибка ввода/вывода Жесткие диски, HDD Решение и ответ на вопрос 1237404

Complete error log:

SMART Error Log Version: 1
ATA Error Count: 21225 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It «wraps» after 49.710 days.

Error 21225 occurred at disk power-on lifetime: 8408 hours (350 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 00 00 00 00 40 Error: UNC at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————— ———————
60 08 00 00 00 00 00 08 00:08:02.389 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 00:08:02.378 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 00:08:02.378 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 00:08:02.375 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:08:02.375 SET FEATURES [Set transfer mode]

Error 21224 occurred at disk power-on lifetime: 8408 hours (350 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 00 00 00 00 40 Error: UNC at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————— ———————
60 08 00 00 00 00 00 08 00:07:59.163 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 00:07:59.163 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 00:07:59.161 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 00:07:59.160 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:07:59.160 SET FEATURES [Set transfer mode]

Error 21223 occurred at disk power-on lifetime: 8408 hours (350 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 00 00 00 00 40 Error: UNC at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————— ———————
60 08 00 00 00 00 00 08 00:07:56.113 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 00:07:56.113 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 00:07:56.113 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 00:07:56.110 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:07:56.110 SET FEATURES [Set transfer mode]

Error 21222 occurred at disk power-on lifetime: 8408 hours (350 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 00 00 00 00 40 Error: UNC at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————— ———————
60 08 00 00 00 00 00 08 00:07:53.064 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 00:07:53.064 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 08 00:07:53.064 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 08 00:07:53.061 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:07:53.061 SET FEATURES [Set transfer mode]

Error 21221 occurred at

Источник
  • Home
  • Forum
  • The Ubuntu Forum Community
  • Ubuntu Official Flavours Support
  • General Help
  • [SOLVED] Gparted Error: Input/Output error during read on /dev/sda

  1. Unhappy Gparted Error: Input/Output error during read on /dev/sda

    I was trying to shrink /dev/sda1 ( Label: Windows ) partition 10GB and add it to /dev/sda2 (Label: Files) (See Attachment). After moving 286GB suddenly I got that error message( See Attachment ).

    FYI I mounted /dev/sda1 partition after starting moving process. May be this is the cause of the error.

    I have noticed another thing, If I clicked on Retry/Cancel/Ignore button on the error message, progress bar of the moving process grows 0.01GB. That means to finish this process I have to click more thousands of clicks!! I also worried about my files.

    So, Is there any way to safely complete this process or safely terminate this process, so that I can keep my files / data safe?

    Last edited by Ashfaqur Rahman; December 28th, 2013 at 10:06 PM.

    Registered Linux User #560763

  2. Re: Gparted Error: Input/Output error during read on /dev/sda

    Do yourself a favor and only use Windows utilities to manage Windows partitions. Linux utilities can cause issues like above. Use Windows Disk Management or any other such tool for Windows to ‘resize or move’ NTFS partitions.

  3. Re: Gparted Error: Input/Output error during read on /dev/sda

    FYI I mounted /dev/sda1 partition after starting moving process. May be this is the cause of the error.

    No, you really should not have done that.

    If you are really lucky, unmounting the partition again might allow the move to continue, but I have my doubts.

  4. Question Re: Gparted Error: Input/Output error during read on /dev/sda

    Thanks for you advice. @fantab

    Actually I did’t do it, I was careful, I know that at this stage mounting partitions can cause damage. As I saw that this process would take almost 2 hours, I left my laptop for a while and when I came back I saw my brother mounted /dev/sda1 partition!! As soon as I noticed that I unmounted /dev/sda1 but you can see that error occurred@The Cog

    But I am really really lucky this time!! I tried clicking ignore again and again and the progress bar upgraded almost 20GBs. But suddenly Live Ubuntu hanged!! Even hidden terminals(Ctrl + Alt + F1-F6) couldn’t work. So I had no option without force shutdown. I did that. When I restarted I noticed that my all files are safe and sound!
    But Gparted is showing error sign in /dev/sda2( see attachment ). Under /dev/sda2 when I go to information option It suggest me » 10GB of unallocated space within the partition to grow the filesystem to fill the partition, select the partition and choose the menu item partition —> check «( see attachment )

    Now my question is, is it safe to do Check? As It is not possible for me now to backup almost 350GB of space and test myself.

    Registered Linux User #560763

  5. Re: Gparted Error: Input/Output error during read on /dev/sda

    Oh, that’s a relief!

    The check option says «check and repair». I guess it should be safe though I’ve never used it in anger (tried it just now on a spare partition and it instantly said it had finished).
    As always, have a backup first, just in case.

  6. Re: Gparted Error: Input/Output error during read on /dev/sda

    Update:
    I ran «Check» and It repaired my partition safely!

    Registered Linux User #560763

Tags for this Thread

Bookmarks

Bookmarks


Posting Permissions

Источник
  • Печать

Страницы: [1]   Вниз

Тема: Не устанавливается Ubuntu 10.04  (Прочитано 5239 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн
TheHero

С Live CD все отлично работает. А при попытке установить, зависает на 5% с сообщением: «Создание файловой системы ext4 для монтирования в / на разделе #1 устройства SCSl4 (0,1,0) (sda)…«.
Проблема не с диском, потому что я перепробывал кучи. В данный момент уже 4 часа с 5%, к какому то времени должно выдать ошибку(знаю потому что уже пробовал), когда выдаст  — уточню в теме какая ошибка. Но может хватит и этих данных для выявления проблемы.

Оффлайн
stmc

так разметь диск еще до установки

Оффлайн
TheHero

Ты понял в чем у меня проблема?
Можно подробнее?

Оффлайн
Koroboru

Оффлайн
TheHero

Попробуйте подготовить разметку диска с помощью GParted с LiveCD.
https://help.ubuntu.ru/manual/%D1%80%D0%B0%D0%B7%D0%BC%D0%B5%D1%82%D0%BA%D0%B0_%D0%B4%D0%B8%D1%81%D0%BA%D0%B0
А также прочтите следующую главу «Установка». Да и вообще — хорошее руководство, если вы новичок в Ubuntu — рекомендую прочесть.

Все сделал по статье, на этот раз выводило ошибку «Input/output error during read on /dev/sda«. При повторной попытке, жесткий диск вообще пропал и уже не возвращался. Пропал — то есть в установке убунты его не было, и биос материнской платы не видел.

Кстати, вспомнил одну деталь — у меня стояла Ubuntu 64 битная, а делал я переустановку на 32 битную. Не знаю насколько это важно.

« Последнее редактирование: 07 Июня 2010, 19:08:39 от TheHero »

Оффлайн
Shefango

Похоже, что дело в диске. Если БИОС не видит — херово дело…

Ubuntu MATE@G2120/ASRock H61M-DGS/2x2Gb RAM/500Gb,1Tb,1Tb SATA/GF GTХ650/ext4
Runtu XFCE-14.04@Dell Inspirion 3542

yura_n

У меня была такая проблема с неттопом Asus. Диск был не при чем, это просто глюк. Решилась сменой дистрибутива. Попробуйте alternate версию.

Оффлайн
Raptor26

попробуй другую фаиловую систему, например ext3 вместо ext4

Пользователь решил продолжить мысль 07 Июня 2010, 18:38:27:

У меня похожий трабл был на дебиане, ext3 спасла.

Оффлайн
TheHero

Решилась сменой дистрибутива. Попробуйте alternate версию.

Менять дистрибутив это не решение. Но я пробовал 9.10 — и тот же результат.

Можно попробовать банально перезаписать диск с дистрибутивом.

Я пробовал много дисков.

Или это: http://defoult.ru/2009/11/testirovanie-zhestkogo-diska-hdd/
Если не поможет, и есть возможно, то открыть корпус и отключить-подключить кабели (вряд ли поможет, но все-таки).

Попробую.

попробуй другую фаиловую систему, например ext3 вместо ext4

Тоже самое — «Input/output error during read on /dev/sda«

И еще. Ubuntu 9.10 увидела жесткий диск, но ошибка все еще есть(пробовал ext3 и ext4). Ubuntu 10.04 и биос по прежнему не видят.

Оффлайн
Serg

Правильно заданный вопрос — уже половина ответа

Оффлайн
Raptor26

может она с журналируемыми фаиловыми системами не дружит, попробуй ext2 или другую не журналируемую систему.

Оффлайн
Упс

Решилась сменой дистрибутива. Попробуйте alternate версию.

Менять дистрибутив это не решение.

На alternate CD тоже Ubuntu. ;)

Оффлайн
Alexandre

Через неделю После появления  сообщений об ошибках ввода вывода у меня система вывела в области уведомления красный треугольник с предупреждением о скорой кончине диска. Пару дней спустя об этом сообщил биос (ноутбучный самсунг на 160 ги). Пришлось поменять на 120 (стоял в усб накопителе). Хотя этот на 160 вроде пашет в накопителе правда отформат в нтфс и доверия не имеет)). Попробуй загрузиться с лайв и проверить диск встроенной в 10.04 дисковой утилитой

  • Печать

Страницы: [1]   Вверх

Источник

Avatar of bappearl

bappearl

 asked on 4/25/2009

When I try to install Ubuntu 9.04 I get the following error:

«input/output error during read on /dev/sda»

This comes up almost immediately after I finish going through the initial option screens.

LinuxLinux Distributions

Avatar of undefined

THIS SOLUTION ONLY AVAILABLE TO MEMBERS.

View this solution by signing up for a free trial.

Members can start a

7-Day free trial

and enjoy unlimited access to the platform.

Unfortunately I do not have a testing utility.  Do you know of one I can download?

And how do I know what sda is?

They are all on the ubcd. But it is most likely your installation CD, as the HD is accessed when you get to the partitioning of it, and the way I understand, you get that message earlier on during the installation.

http://ultimatebootcd.com

What Disk controllers are you using, to what is the CD Drive connected, and to what is the HD connected?

Also, how far do you get with the CD? Are you booting into the ubuntu desktop and then running the installation script, or are you selecting install ubuntu directly from the boot menu of ubuntu?

The Hard Drive is IDE as is the CD Drive and this is a laptop.

I’ve tried installing it both ways. I can successfully get into the desktop, but the installation gives the same error from there as well.

And the error always appears after I go through the initial screens (click next, next, etc.)

It then comes up with the copying files loading bar, and then the error pops up.

It pops up after the disk is formatted? If yes, then it is probably an HD problem. Also, the screen where you can select whether the disk should be formatted manually or not should also show you the device name of the disk. If sda is shown there, then it’s the HD, if another letter combination is shown, then sda would be the CD Drive. Also if you select manual you should see more details.

I just tried to install Ubuntu again, and it worked this time.  I don’t know if it was just a fluke or maybe the scanner did fix some errors.

Источник

Понравилась статья? Поделить с друзьями:
  • Input framing error
  • Input error you must pass a valid list of files to parse
  • Input error parameter value type mismatch
  • Input error incorrect numeric value
  • Input error giant