Internal error 0x0b interface config missing outlast

Как исправить Internal error 0x06 System error

Ошибка «Internal error 0x06 system error» встречаются в играх Fallout, Skyrim, PeS и других из популярной игровой библиотеки Steam. Эта проблема встречается не так уж и часто, из-за чего многие не знают, как с ней справиться. Если еще взять в расчет то, что наши отечественные игроманы любят скачивать различные моды и переупакованные игры из различных торрент-трэкеров и варезников, то появление ошибок в таких случаях учащается. Давайте рассмотрим ошибку подробнее и установим, что можно сделать для ее устранения.

Причины, по которым возникает ошибка

Причина ошибки одна – игра при запуске нуждается в определенной папке, которую она использует в своих целях. Но часто, особенно из-за репаков и других модов, скаченных в Интернете, эта папка в игре отсутствует и нам придется создавать ее вручную, чтобы игра заработала.

Как устранить ошибку Internal error 0x06 System error

Этот метод именно для этой ошибки является универсальным, если мы избавимся от этой проблемы с одной игрой, то и в дальнейшем будут работать все остальные. На нужно создать папку, для этого откройте «Мой компьютер».

1. Откройте раздел жесткого диска с операционной системой, чаще всего это диск C:/.
2. Необходимо проследить, чтобы конечная папка не имела названия на русском языке. Если это так, то ее необходимо переименовать. Откройте папку «Users/Пользователи», дальше «Public/Общие» и здесь создайте новую папку и назовите ее «File».
3. Откройте папку «File» и в ней создайте еще одну – «Steam». Так, если у вас англоязычная версия ОС Windows, путь будет: «C:UsersPublicFileSteam». Для русскоязычной системы путь будет выглядеть следующим образом – «C:ПользователиОбщиеFileSteam».
4. Теперь закройте все окна и папки, перезапустите компьютер и попробуйте запустить игру, которая выдавала ошибку.

Чистка диска и реестра

Не зависимо от итога предыдущего метода используйте эту рекомендацию. Очистите диск и реестр при помощи специальной программы CCleaner. Можно использовать и другие подобные утилиты. Чтобы скачать и установить ее, перейдите по ссылке — ccleaner.com/ru-ru/ccleaner. С установкой программы у вас не должно возникнуть проблем, устанавливается она традиционным способом. При установке не забудьте убрать чекбоксы с пунктов об установке дополнительного ПО, которые с каждым днем все чаще пестрят в популярных программах при установке.

Эта программа найдет и удалит из вашего компьютера все не используемые файлы, не полностью удаленные программы и игры, логи различных программ, которые также скапливаются в определенных папках, которые могут быть скрыты от простого пользователя и другие вредные файлы, которые еще и занимают большую часть места на диске. Все эти файлы могут быть причинами появления самых разнообразных ошибок.

Для очистки системы от мусора нажмите кнопку внизу окна программы «Анализ».

После этого запустится сбор сведений о системе. После завершения анализа необходимо нажать кнопку «Очистка». Аналогичным образом чистим реестр этой же программой. В левом меню выберите пункт «Реестр» и нажмите внизу окна кнопку «Поиск проблем».

Используйте программу CCleaner

Снова по завершению анализа вашего реестра нажмите кнопку «Исправить».

Сканирование системы на вирусы

Антивирус является одним из самых популярных «помех» для игр и приложений. Он создан таким образом, что любой незарегистрированный в системе или без цифровых подписей файл уже является угрозой человечеству. Такие файлы попадают в хранилище или карантин и следующие попытки запустить программу, которая имеет файлы в карантине уже не удастся запустить. Поэтому при возникновении ошибок и других проблем с программами и приложениями откройте хранилище антивируса и убедитесь, что в нем нет файлов игры, иначе их необходимо переместить.

Просканируйте всю систему на наличие вирусов. Сканировать необходимо глубоким способом. Перед запуском отключите все антивирусы и брандмауэр, они могут быть причиной ошибки. Если игра после этого запустилась, антивирусное программное обеспечение необходимо включить снова.

Проверка драйверов устройств

В некоторых тяжелых случаях, если ошибка «Internal error 0x06 System error» не исчезает проверьте, в порядке ли драйвера на вашем компьютере. Для этого:

1. Нажмите правой кнопкой мыши на значке «Пуск» и выберите «Диспетчер устройств».
2. Откроется список всех ваших устройств на компьютере. Те устройства, драйвера которых устарели или вовсе их нет, будут иметь иконку вопросительного знака рядом. Это говорит нам о том, что система не распознает это устройство.

Нажмите на таком устройстве правой кнопкой мыши и выберите пункт «Обновить драйвер». После этого система автоматически начнет поиск нужного ПО в Интернете, а когда найдет – сама его установит.

После проверки и установки всех необходимых драйверов закройте все окна и перезагрузите компьютер. Запустите игру, которая выдавала ошибку.

Источник

Wireless LAN Controller (WLC) Error and System Messages FAQ

Available Languages

Download Options

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Contents

Introduction

This document provides information on the most frequently asked questions (FAQ) on error messages and system messages for the Cisco Wireless LAN (WLAN) Controllers (WLCs).

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Error Messages FAQ

Q. We have begun the conversion of more than 200 access points (APs) from Cisco IOS® Software to Lightweight AP Protocol (LWAPP) with a Cisco 4404 WLC. We have completed the conversion of 48 APs and we receive a message on the WLC that states: [ERROR] spam_lrad.c 4212: AP cannot join because the maximum number of APs on interface 1 is reached. Why does the error occur?

A. You must create additional AP-manager interfaces in order to support more than 48 APs. Otherwise, you receive the error that looks like this:

Configure multiple AP-manager interfaces and configure primary/backup ports that other AP-manager interfaces do not use. You must create a second AP-manager interface in order to bring up additional APs. But, make sure that your primary port and backup port configurations for each manager do not overlap. In other words, if AP-manager 1 uses port 1 as the primary and port 2 as the backup, AP-manager 2 must use port 3 as the primary and port 4 as the backup.

Q. I have a Wireless LAN Controller (WLC) 4402 and I use 1240 lightweight access points (LAPs). I am trying to enable 128-bit encryption on the WLC. When I select 128-bit WEP encryption on the WLC, I receive an error that says that 128-bit is not supported on the 1240s: [ERROR] spam_lrad.c 12839: Not creating SSID mde on CISCO AP xx:xx:xx:xx:xx:xx because WEP128 bit is not supported. Why do I receive this error?

A. The key lengths shown on the WLCs are actually the number of bits that are in the shared secret and do not include the 24-bits of the Initialization Vector (IV). Many products, which includes the Aironet products, call it a 128-bit WEP key. In reality it is a 104-bit key with 24-bit IV. The key size of 104-bit is what you must enable on the WLC for 128-bit WEP encryption.

If you choose the 128-bit key size on the WLC, it is actually a 152-bit (128 + 24 IV) WEP key encryption. Only Cisco 1000 Series LAPs (AP1010, AP1020, AP1030) support the use of the WLC 128 bit WEP key setting.

Q. Why do I get the WEP key size of 128 bits is not supported on 11xx, 12xx and 13xx model APs. Wlan will not be pushed to these Access Points. error message when I try to configure WEP on a WLC?

A. On a Wireless LAN Controller, when you choose Static WEP as the Layer 2 Security method, you have these options or the WEP Key Size.

These key size values do not include the 24-bit Initialization Vector (IV), which is concatenated with the WEP key. So, for a 64-bit WEP, you need to choose 40 bits as the WEP key size. The controller adds the 24-bit IV to this in order to make a 64-bit WEP key. Similarly, for a 128 bit WEP key, choose 104 bits.

Controllers also supports 152 bit WEP keys (128 bit + 24 bit IV). This configuration is not supported on the 11xx, 12xx and 13xx model APs. So when you try to configure WEP with 144 bits, the controller gives a message that this WEP configuration is not pushed to 11xx, 12xx and 13xx model APs.

Q. Clients are not able to authenticate to a WLAN that is configured for WPA2 and the controller displays the apf_80211.c:1923 APF-1-PROC_RSN_WARP_IE_FAILED: Could not process the RSN and WARP IE’s. station not using RSN (WPA2) on WLAN requiring RSN.MobileStation:00:0c:f1:0c:51:22, SSID:<> error message. Why do I receive this error?

A. This mostly occurs due to incompatibility on the client side. Try these steps in order to fix this issue:

Check if the client is Wi-Fi certified for WPA2 and check the configuration of the client for WPA2.

Check the data sheet in order to see if the client Utility supports WPA2. Install any patch released by the vendor to support WPA2. If you use Windows Utility, make sure that you have installed the WPA2 patch from Microsoft in order to support WPA2.

Upgrade the client’s Driver and Firmware.

Turn off Aironet extensions on the WLAN.

Q. Once I reboot the WLC, I get the Mon Jul 17 15:23:28 2006 MFP Anomaly Detected — 3023 Invalid MIC event(s) found as violated by the radio 00:XX:XX:XX:XX and detected by the dot11 interface at slot 0 of AP 00:XX:XX:XX:XX in 300 seconds when observing Probe responses, Beacon Frames error message. Why does this error occur and how do I get rid of it?

A. This error message is seen when frames with incorrect MIC values are detected by MFP enabled LAPs. Refer to Infrastructure Management Frame Protection (MFP) with WLC and LAP Configuration Example for more information on MFP. Complete one of these four steps:

Check and remove any rogue or invalid APs or clients in your network, which generate invalid frames.

Disable the Infrastructure MFP, if MFP is not enabled on other members of the Mobility group as LAPs can hear management frames from LAPs of other WLCs in the group that do not have MFP enabled. Refer to Wireless LAN Controller (WLC) Mobility Groups FAQ for more information on Mobility Group.

The fix for this error message is available in the WLC releases 4.2.112.0 and 5.0.148.2. Upgrade the WLCs to either of these releases.

As a last option, try to reload the LAP that generates this error message.

Q. Client AIR-PI21AG-E-K9 successfully associates with an access point (AP) using Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST). However, when the associated AP is switched off, the client does not roam to another AP. This message appears continuously in the controller message log: «Fri Jun 2 14:48:49 2006 [SECURITY] 1x_auth_pae.c 1922: Unable to allow user into the system — perhaps the user is already logged onto the system? Fri Jun 2 14:48:49 2006 [SECURITY] apf_ms.c 2557: Unable to delete username for mobile 00:40:96:ad:75:f4». Why?

A. When the client card needs to do roaming, it sends an authentication request, but it does not correctly handle keys (does not inform AP/controller, does not answer reauthentications).

This is documented in Cisco bug ID CSCsd02837 ( registered customers only ) . This bug has been fixed with Cisco Aironet 802.11a/b/g client adapters Install Wizard 3.5.

In general, the Unable to delete username for mobile message also occurs due to any of these reasons:

The particular username is used on more than one client device.

Authentication method used for that WLAN has an external anonymous identity. For example, in PEAP-GTC or in EAP-FAST, it is possible to define a generic username as external (visible) identity, and the real username is hidden inside the TLS tunnel between client and radius server, so the controller cannot see it and use it. In such cases, this message can appear. This issue is seen more commonly with some third party and some old firmware client.

Q. When I install the new Wireless Services Module (WiSM) blade in the 6509 switch and implement Protected Extensible Authentication Protocol (PEAP) with the Microsoft IAS server, I receive this error: *Mar 1 00:00:23.526: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Mar 1 00:00:23.700: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT.Reload Reason: FAILED CRYPTO INIT. *Mar 1 00:00:23.700: %LWAPP-5-CHANGED: LWAPP changed state to DOWN *Mar 1 00:00:23.528: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Mar 1 00:00:23.557: LWAPP_CLIENT_ERROR_DEBUG:lwapp_crypto_init_ssc_keys_and_certs no certs in the SSC Private File *Mar 1 00:00:23.557: LWAPP_CLIENT_ERROR_DEBUG: *Mar 1 00:00:23.557: lwapp_crypto_init: PKI_StartSession failed *Mar 1 00:00:23.706: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. . Why?

A. RADIUS and dot1x debugs show that the WLC sends an access request, but there is no response from the IAS server. Complete these steps in order to troubleshoot the problem:

1. Check and verify the IAS server configuration.
2. Check the log file.
3. Install software, such as Ethereal, which can give you authentication details.
4. Stop and start the IAS service.

Q. The lightweight access points (LAPs) do not register with the controller. What might be the problem? I see these error messages on the controller: Thu Feb 3 03:20:47 2028: LWAPP Join-Request does not include valid certificate in CERTIFICATE_PAYLOAD from AP 00:0b:85:68:f4:f0. Thu Feb 3 03:20:47 2028: Unable to free public key for AP 00:0B:85:68:F4:F0.

A. When the access point (AP) sends the Lightweight Access Point Protocol (LWAPP) Join Request to the WLC, it embeds its X.509 certificate in the LWAPP message. It also generates a random session ID that is included in the LWAPP Join Request. When the WLC receives the LWAPP Join Request, it validates the signature of the X.509 certificate using the APs public key and checks that the certificate was issued by a trusted certificate authority. It also looks at the starting date and time for the AP certificate validity interval, and compares that date and time to its own date and time.

This problem can occur due to an incorrect clock setting on the WLC. In order to set the clock on the WLC, issue the show time and config time commands.

Q. A Lightweight Access Point Protocol (LWAPP) AP is unable to join its controller. The Wireless LAN Controller (WLC) log displays a message similar to this: LWAPP Join-Request does not include valid certificate in CERTIFICATE_PAYLOAD from AP 00:0b:85:68:ab:01. Why?

A. You can receive this error message if the LWAPP tunnel between the AP and the WLC traverses a network path with an MTU under 1500 bytes. This causes the fragmentation of the LWAPP packets. This is a known bug in the controller. Refer to Cisco bug ID CSCsd39911 ( registered customers only ) .

The solution is to upgrade the controller firmware to 4.0(155).

Q. I am trying to establish guest tunneling between my internal controller and the virtual anchor controller on the De-Militarized Zone (DMZ). However, when a user attempts to associate with a guest SSID, the user is unable to receive the IP address from the DMZ, as expected. Therefore, the user traffic is not tunneled to the controller on the DMZ. The output of the debug mobile handoff command displays a message similar to this: Security Policy Mismatch for WLAN . Anchor Export Request from Switch IP: Ignored. What is the problem?

A. Guest tunneling provides additional security for guest-user access to the corporate wireless network. This helps to ensure that guest users are unable to access the corporate network without first passing through the corporate firewall. When a user associates with a WLAN that is designated as the guest WLAN, the user traffic is tunneled to the WLAN controller that is located on the DMZ outside of the corporate firewall.

Now, in consideration of this scenario, there can be several reasons for this guest tunneling to not function as expected. As the debug command output implies, the problem might be with the mismatch in any of the security policies configured for that particular WLAN in the internal as well as in the DMZ controllers. Check whether the security policies as well as other settings, such as session time out settings, are matched.

Another common reason for this issue is the DMZ controller not being anchored to itself for that particular WLAN. For a guest tunneling to work properly and for the DMZ to administer the IP address of the user (user that belongs to a guest WLAN), it is essential that proper anchoring is done for that particular WLAN.

Q. I see a lot of «CPU Receive Multicast Queue is full on Controller» messages on the 2006 Wireless LAN Controller (WLC), but not on the 4400 WLCs. Why? I have disabled multicast on the controllers. What is the difference in the Multicast Queue Limit between the 2006 and 4400 WLC platforms?

A. Because multicast is disabled on the controllers, the messages that cause this alarm might be Address Resolution Protocol (ARP) messages. There is no difference in queue depth (512 packets) between the 2000 WLCs and the 4400 WLCs. The difference is that the 4400 NPU filters ARP packets whereas everything is done in software on the 2006. This explains why the 2006 WLC sees the messages but not the 4400 WLC. A 44xx WLC processes multicast packets via hardware (through CPU). A 2000 WLC processes multicast packets via software. CPU processing is more efficient than software. Therefore, the 4400’s queue is cleared faster, whereas the 2006 WLC struggles a bit when it sees a lot of these messages.

Q. I see the «[SECURITY] apf_foreignap.c 763: STA [00:0A:E4:36:1F:9B] Received a packet on port 1 but no Foreign AP configured for this port.» error message in one of my controllers. What does this error mean and what steps should I take to resolve it?

A. This message is seen when the controller receives a DHCP request for a MAC address for which it does not have a state machine. This is often seen from a bridge or a system that runs a virtual machine like VMWare. The controller listens to DHCP requests because it performs DHCP snooping so it knows which addresses are associated with clients that are attached to its access points (APs). All traffic for the wireless clients pass through the controller. When the destination of a packet is a wireless client, it goes to the controller and then passes through the Lightweight Access Point Protocol (LWAPP) tunnel to the AP and off to the client. One thing that can be done to help mitigate this message is to only allow the VLANs that are used on the controller onto the trunk that goes to the controller with the switchport vlan allow command on the switch.

Q. Why do I see this error message on the console: Msg ‘Set Default Gateway’ of System Table failed, error value = 0xfffffffc?

A. This can be due to high CPU load. When the controller CPU is heavily loaded such as when it does file copies or other tasks, it does not have time to process all of the ACKs that the NPU sends in response to configuration messages. When this occurs, the CPU generates error messages. However, the error messages do not impact service or functionality.

Q. I receive these Wired Equivalent Privacy (WEP) key error messages on my wireless control system (WCS): The WEP Key configured at the station may be wrong. Station MAC Address is ‘xx:xx:xx:xx:xx:xx’, AP base radio MAC is ‘xx:xx:xx:xx:xx:xx’ and Slot ID is ‘1’. However, I do not use WEP as the security parameter in my network. I only use Wi-Fi Protected Access (WPA). Why do I receive these WEP error messages?

A. If all your security related configurations are perfect, the messages you receive right now are because of bugs. There are some known bugs in the controller. Refer to Cisco bug IDs CSCse17260 ( registered customers only ) and CSCse11202 ( registered customers only ) , which state «The WEP Key configured at the station may be wrong with WPA and TKIP clients respectively«. Actually, CSCse17260 is a duplicate of CSCse11202. The fix for CSCse11202 is already available with WLC release 3.2.171.5.

Note: The latest WLC releases has a fix for these bugs.

Q. We use an external RADIUS server to authenticate wireless clients through the controller. The controller sends this error message regularly: no radius servers are responding. Why do we see these error messages?

A. When a request goes out from the WLC to the RADIUS server, each packet has a sequence number to which the WLC expects a response. If there is no response, there is a message that shows radius-server not responding.

The default time for the WLC to hear back from the RADIUS server is 2 seconds. This is set from the WLC GUI under Security > authentication-server. The maximum is 30 seconds. Therefore, it might be helpful to set this time out value to its maximum in order to resolve this issue.

Sometimes, the RADIUS servers perform ‘silent discards’ of the request packet that comes from the WLC. The RADIUS server can reject these packets due to certificate mismatch and several other reasons. This is a valid action by the server. Also, in such cases, the controller will mark the RADIUS server as not responding.

In order to overcome the silent discards issue, disable the aggressive failover feature in the WLC.

If the aggressive failover feature is enabled in WLC, the WLC is too aggressive to mark the AAA server as not responding. However, this should not be done because the AAA server might not be responsive only to that particular client (by doing silent discard). It can be a response to other valid clients (with valid certificates). However, the WLC might still mark the AAA server as not responding and not functional.

In order to overcome this, disable the aggressive failover feature. Issue the config radius aggressive-failover disable command from the controller CLI in order to perform this. If this is disabled, then the controller only fails over to the next AAA server if there are 3 consecutive clients that fail to receive a response from the RADIUS server.

Q. Several clients are unable to associate to an LWAPP and the controller logs the IAPP-3-MSGTAG015: iappSocketTask: iappRecvPkt returned error error message. Why does this happen?

A. This mostly happens due to an issue with the Intel adapters that support CCX v4, but that run a client bundle version earlier than 10.5.1.0. If you upgrade the software to 10.5.1.0 or later, this fixes this issue. Refer to Cisco bug ID CSCsi91347 ( registered customers only ) for more information on this error message.

Q. I see this error message on the Wireless LAN Controller (WLC): Reached Max EAP-Identity Request retries (21) for STA 00:05:4e:42:ad:c5. Why?

A. This error message occurs when the user tries to connect to a EAP protected WLAN network and has failed the preconfigured number of EAP attempts. When the user fails to authenticate, the controller excludes the client and the client cannot connect to the network until the exclusion timer expires or is manually overridden by the administrator.

Exclusion detects authentication attempts made by a single device. When that device exceeds a maximum number of failures, that MAC address is not allowed to associate any longer.

After 5 consecutive authentication failures for shared authentications (6th try is excluded)

After 5 consecutive association failures for MAC authentication (6th try is excluded)

After 3 consecutive EAP/802.1X authentication failures (4th try is excluded)

Any external policy server failure (NAC)

Any IP address duplication instance

After 3 consecutive web authentication failures (4th try is excluded)

The timer for how long a client is excluded can be configured, and exclusion can be enabled or disabled at the controller or WLAN level.

Q. I see this error message on the Wireless LAN Controller (WLC): An Alert of Category Switch is generated with severity 1 by Switch WLCSCH01/10.0.16.5 The message of the alert is Controller ‘10.0.16.5’. RADIUS server(s) are not responding to authentication requests. What is the issue?

A. This might be because of Cisco bug ID CSCsc05495. Because of this bug, the controller periodically injects an incorrect AV-Pair (attribute 24, «state») into authentication request messages that violate a RADIUS RFP and cause problems for some authentication servers. This bug is fixed in 3.2.179.6.

Q. I receive a Noise Profile failure message under Monitor > 802.11b/g Radios. I want to understand why I see this FAILED message?

A. The Noise Profile FAILED/PASSED status is set after the test result done by the WLC and in comparison with the current set threshold. By default, the Noise value is set to -70. The FAILED state indicates that the threshold value for that particular parameter or access point (AP) has been exceeded. You can adjust the parameters in the profile, but it is recommended to change the settings after you clearly understand the network design and how it will affect the performance of the network.

The Radio Resource Management (RRM) PASSED/FAILED thresholds are globally set for all APs on the 802.11a Global Parameters > Auto RF and 802.11b/g Global Parameters > Auto RF pages. The RRM PASSED/FAILED thresholds are individually set for this AP on the 802.11 AP Interfaces > Performance Profile page.

Q. I cannot set port 2 as the backup port for the AP-manager interface. The returned error message is Could not set port configuration. I am able to set port 2 as the backup port for the management interface. The current active port for both interfaces is port 1. Why?

A. An AP-manager does not have a backup port. It used to be supported in earlier versions. Since version 4.0 and later, the backup port for AP-manager interface is not supported. As a rule, a single AP-manager should be configured on each port (no backups). If you use Link Aggregation (LAG), there is only one AP-manager.

The static (or permanent) AP-manager interface must be assigned to distribution system port 1 and must have a unique IP address. It cannot be mapped to a backup port. It is usually configured on the same VLAN or IP subnet as the management interface, but this is not a requirement.

Q. I see this error message: The AP ’00:0b:85:67:6b:b0′ received a WPA MIC error on protocol ‘1’ from Station ’00:13:02:8d:f6:41′. Counter measures have been activated and traffic has been suspended for 60 seconds. Why?

A. Message Integrity Check (MIC) incorporated in Wi-Fi Protected Access (WPA) includes a frame counter which prevents a man-in-the-middle attack. This error means someone in the network is trying to replay the message that was sent by the original client, or it might mean that the client is faulty.

If a client repeatedly fails the MIC check, the controller disables the WLAN on the AP interface where the errors are detected for 60 seconds. The first MIC failure is logged, and a timer is initiated in order to enable enforcement of the countermeasures. If a subsequent MIC failure occurs within 60 seconds of the most recent previous failure, then a STA whose IEEE 802.1X entity has acted as a Supplicant shall deauthenticate itself or deauthenticate all the STAs with a security association if its IEEE 802.1X entity acted as an Authenticator.

Furthermore, the device does not receive or transmit any TKIP-encrypted data frames, and does not receive or transmit any unencrypted data frames other than IEEE 802.1X messages, to or from any peer for a period of at least 60 seconds after it detects the second failure. If the device is an AP, it disallows new associations with TKIP during this 60 seconds period; at the end of the 60 seconds period, the AP resumes normal operations and allows STAs to (re)associate.

This prevents a possible attack on the encryption scheme. These MIC errors cannot be turned off in WLC versions prior to 4.1. With Wireless LAN Controller version 4.1 and later, there is a command to change the scan time for MIC errors. The command is config wlan security tkip hold-down . Use the value 0 in order to disable MIC failure detection for countermeasures.

Q. This error message is seen in my controller logs: [ERROR] dhcp_support.c 357: dhcp_bind(): servPort dhcpstate failed. Why?

A. These error messages are mostly seen when the service port of the controller has DHCP enabled, but does not receive an IP address from a DHCP server.

By default, the physical service port interface has a DHCP client installed and looks for an address via DHCP. The WLC attempts to request a DHCP address for the service port. If no DHCP server is available, then a DHCP request for the service port fails. Therefore, this generates the error messages.

The workaround is to configure a static IP address to the service port (even if the service port is disconnected) or have a DHCP server available to assign an IP address to the service port. Then, reload the controller, if needed.

The service port is actually reserved for out-of-band management of the controller and system recovery, and maintenance in the event of a network failure. It is also the only port that is active when the controller is in boot mode. The service port cannot carry 802.1Q tags. Therefore, it must be connected to an access port on the neighbor switch. Use of the service port is optional.

The service port interface controls communications through and is statically mapped by the system to the service port. It must have an IP address on a different subnet from the management, AP-manager, and any dynamic interfaces. Also, it cannot be mapped to a backup port. The service port can use DHCP in order to obtain an IP address, or it can be assigned a static IP address, but a default gateway cannot be assigned to the service port interface. Static routes can be defined through the controller for remote network access to the service port.

Q. My wireless clients are not able to connect to the wireless LAN (WLAN) network. The WiSM that the access point (AP) is connected to reports this message: Big NAV Dos attack from AP with Base Radio MAC 00:0g:23:05:7d:d0, Slot ID 0 and Source MAC 00:00:00:00:00:00. What does this mean?

A. As a condition to access the medium, the MAC Layer checks the value of its network allocation vector (NAV). The NAV is a counter resident at each station that represents the amount of time that the previous frame needs to send its frame. The NAV must be zero before a station can attempt to send a frame. Before the transmission of a frame, a station calculates the amount of time necessary to send the frame based on the frame’s length and data rate. The station places a value that represents this time in the duration field in the header of the frame. When stations receive the frame, they examine this duration field value and use it as the basis to set their corresponding NAVs. This process reserves the medium for the sending station.

A high NAV indicates the presence of an inflated NAV value (virtual carrier sense mechanism for 802.11). If the MAC address reported is 00:00:00:00:00:00, it is probably being spoofed (potentially a real attack) and you need to confirm this with a packet capture.

Q. After we configure the controller and reboot it, we are not able to access the controller in secure web (https) mode. This error message is received while trying to access the controller secure web mode: Secure Web: Web Authentication Certificate not found (error). What is the reason for this problem?

A. There can be several reasons associated with this issue. One common reason can be related to the virtual interface configuration of the controller. In order to resolve this problem, remove the virtual interface and then re-generate it with this command:

Then, reboot the controller. After the controller is rebooted, re-generate the webauth certificate locally on the controller with this command:

In the output of this command, you should see this message: Web Authentication certificate has been generated.

Now, you should be able to access the secure web mode of the controller upon reboot.

Q. Controllers sometimes report this IDS Disassociation Flood Signature attack alert message against valid clients in which the attacker’s MAC address is that of an access point (AP) joined to that controller: Alert: IDS ‘Disassoc flood’ Signature attack detected on AP » protocol ‘802.11b/g’ on Controller ‘x.x.x.x’. The Signature description is ‘Disassociation flood’, with precedence ‘x’. The attacker’s mac address is ‘hh:hh:hh:hh:hh:hh’, channel number is ‘x’, and the number of detections is ‘x’. Why does this occur?

A. This is because of Cisco bug ID CSCsg81953 ( registered customers only ) .

IDS Disassociation Flood attacks against valid clients are sometimes reported where the attacker’s MAC address is that of an AP joined to that controller.

When a client is associated to the AP but stops communicating because of card removal, roaming out of range, etc. to the AP, the AP will wait until the idle timeout. Once the idle timeout is reached, the AP sends that client a disassociate frame. When the client does not acknowledge the disassociate frame, the AP retransmits the frame numerous times (around 60 frames). The IDS subsystem of the controller hears these retransmits and alerts with this message.

This bug is resolved in version 4.0.217.0. Upgrade your Controller version to this version in order to overcome this alert message against valid clients and APs.

Q. I receive this error message in the syslog of the controller: [WARNING] apf_80211.c 2408: Received a message with an invalid supported rate from station [ERROR] apf_utils.c 198: Missing Supported Rate. Why?

A. Actually, Missing Supported Rate messages indicate that the WLC is configured for certain required data rates under the wireless settings, but the NIC card is missing the required rate.

If you have data rates, such as 1 and 2M, set for required on the controller but the NIC card does not communicate on these data rates, you can receive this kind of message. This is NIC card misbehavior. On the other hand, if your controller is 802.11g is enabled and the client is a 802.11b(only) card, this is a legitimate message. If these messages do not cause any problems and the cards can still connect, these messages can be ignored . If the messages are card specific, then make sure the driver for this card is up to date.

Q. This syslog AP:001f.ca26.bfb4: %LWAPP-3-CLIENTERRORLOG: Decode Msg: could not match WLAN ID error message is broadcast on our network. Why does this occur and how do I stop it?

A. This message is broadcast by the LAPs. This is seen when you have configured WLAN override feature for a WLAN and that particular WLAN is not advertised.

Configure config ap syslog host global 0.0.0.0 in order to stop it or you can put a specific IP address if you have a syslog server so that message is broadcast to the server alone.

Q. I receive this error message on my wireless LAN controller (WLC): [ERROR] File: apf_mm.c : Line: 581 : Announce collision for mobile 00:90:7a:05:56:8a, deleting. Why?

A. Generally, this error message indicates that the controller had announced collisions for a wireless client (i.e separate APs announce that they have the client), and the controller did not receive a handoff from one AP to the next. There is no network state to maintain. Delete the wireless client and have the client try again. If this problem occurs frequently, there can be a problem with mobility configuration. Otherwise, it might be an anomaly that is related to a specific client or condition.

Q. My controller raises this alarm message: Coverage threshold of ’12’ violated. What is this error and how can it be resolved?

A. This alarm message is raised when a client Signal-to-Noise Ratio (SNR) falls below the SNR threshold value for the particular radio. 12 is the default SNR threshold value for coverage hole detection.

The coverage hole detection and correction algorithm determine if a coverage hole exists when clients’ SNR levels pass below a given SNR threshold. This SNR threshold varies based on two values: AP transmit power and the controller coverage profile value.

In detail, the Client SNR threshold is defined by each AP’s transmit power (represented in dBm), minus the constant value of 17dBm, minus the user configurable Coverage profile value (this value is defaulted to 12 dB).

Client SNR Cutoff Value (|dB|) = [AP Transmit Power (dBm) – Constant (17 dBm) – Coverage Profile (dB)]

This user configurable coverage profile value can be accessed this way:

In the WLC GUI, go to the main heading of Wireless and select the Network option for the WLAN standard of choice on the left side (802.11a or 802.11b/g). Then, select Auto RF in the upper right of the window.

In the Auto RF Global parameters page, find the Profile Thresholds section. In this section, you can find the Coverage (3 to 50 dbm) value. This value is the user configurable coverage profile value.

This value can be edited to influence the Client SNR threshold value. The other way to influence this SNR threshold is to increase the transmit power and compensate the coverage hole detection.

Q. I am using ACS v 4.1 and a 4402 Wireless LAN Controller (WLC). When the WLC attempts to MAC-authenticate a wireless client to ACS 4.1, the ACS fails to respond with the ACS and reports this error message: » Internal error has occurred «. I have all my configurations correct. Why does this internal error occur?

A. There is an authentication related Cisco bug ID CSCsh62641 ( registered customers only ) in the ACS 4.1, where the ACS gives the Internal error has occured error message.

This bug might be the issue. There is a patch available for this bug on the ACS 4.1 Downloads ( registered customers only ) page which should fix the problem.

Q. The Cisco 4400 Series Wireless LAN Controller (WLC) will not boot. This error message is received on the controller: ** Unable to use ide 0:4 for fatload ** Error (no IRQ) dev 0 blk 0: status 0x51 Error reg: 10 ** Can’t read from device 0. Why?

A. The reason for this error might be a hardware issue. Open a TAC case to further troubleshoot this problem. In order to open a TAC case, you need to have a valid contract with Cisco. Refer to Technical Support in order to contact the Cisco TAC.

Q. The wireless LAN controller (WLC) runs into memory buffer issues. Once the memory buffers are full, the controller crashes and needs to be rebooted to bring it back online. These error messages are seen in the message log: Mon Apr 9 10:41:03 2007 [ERROR] dtl_net.c 506: Out of System buffers Mon Apr 9 10:41:03 2007 [ERROR] sysapi_if_net.c 537: Cannot allocate new Mbuf. Mon Apr 9 10:41:03 2007 [ERROR] sysapi_if_net.c 219: MbufGet: no free Mbufs. Why?

A. This is due to Cisco bug ID CSCsh93980 ( registered customers only ) . This bug has been resolved in WLC version 4.1.185.0. Upgrade your Controller to this software version or later in order to overcome this message.

Q. We performed the upgrade of our Wireless LAN Controller (WLC) 4400s to 4.1 code and our syslog was bombarded by messages, such as this: May 03 03:55:49.591 dtl_net.c:1191 DTL-1-ARP_POISON_DETECTED: STA [00:17:f2:43:26:93, 0.0.0.0] ARP (op 1) received with invalid SPA 192.168.1.233/TPA 192.168.1.233. What do these messages indicate?

A. This can occur when WLAN is marked as DHCP required . In such cases, only stations that receive an IP address through DHCP are allowed to associate. Static clients are not allowed to associate to this WLAN. WLC acts as a DHCP relay agent and records IP address of all the stations. This error message is generated when WLC receives ARP request from a station before the WLC has received DHCP packets from the station and recorded its IP address.

Q. When you use Power over Ethernet (PoE) on the Cisco 2106 Wireless LAN Controller, the AP radios are not enabled. The AP is unable to verify sufficient in-line power. Radio slot disabled. error message appears. How can I fix this?

A. This error message occurs when the switch, which powers up the Access Point, is a pre-standard switch but the AP does not support Pre-standard mode of input power.

A Cisco pre-standard switch is one that does not support intelligent power management (IPM) but does have sufficient power for a standard access point.

You must enable the Pre-Standard mode of power on the AP that is subjected to this error message. This can be done from the Controller CLI with the config ap power pre-standard command.

This command should already be configured, if required, if you upgrade to software release 4.1 from a previous release. But, it is possible that you need to enter this command for new installations, or if you reset the AP to Factory Defaults.

These Cisco pre-standard 15-watt switches are available:

WS-C3550, WS-C3560, WS-C3750

2600, 2610, 2611, 2621, 2650, 2651

2610XM, 2611XM, 2621XM, 2650XM, 2651XM, 2691

Источник

Как исправить ошибку [Unable to initialize Steam API]

Ошибка «Unable to initialize Steam API» появляется в большинстве случаев из-за повреждений файлов игры на жестком диске и при попытке запуска нелицензионной версии игры через Steam.

Проблему можно решить несколькими способами, в зависимости от причин ее появления. Читайте инструкцию ниже.

Способ 1

Очистите кэш клиента Steam. Для этого выполните следующие действия:

Запустите программу, в верхнем углу щелкните по надписи «Steam», затем «Настройки».

В открывшемся окне слева выберите «Загрузки», а справа — «Очистить кэш загрузки», затем «ОК».

После этого перезапустите программу и проверьте, помогла ли эта процедура.

Способ 2

Если ошибка возникает после неудачного обновления Steam, или если файлы программы были случайно повреждены по какой-либо причине, самым простым решением проблемы будет ручная переустановка.

Нажмите кнопку «Пуск» и найдите там «Панель управления». В Windows 10 для этого нужно просто начать набирать слово «панель» на клавиатуре, и она будет найдена через поиск. В Windows 7 ссылка на нее закреплена в Пуске. Кликните по панели управления и в открывшемся окне щелкните по надписи «Программы и компоненты».

Найдите в списке Steam, правой кнопкой мыши откройте контекстное меню и выберите команду «Удалить».

После этого скачайте новый загрузочный файл с нашего или с официального сайта https://store.steampowered.com/ и установите программу на компьютер снова, следуя инструкции по установке.

Способ 3

Steam может сообщать о невозможности инициализации (unable to initialize), потому что учетной записи пользователя Windows не хватает прав. Тогда попробуйте открыть программу с правами администратора. Для этого нужно найти на рабочем столе ее ярлык, щелкнуть по нему правой кнопкой мыши и выбрать пункт меню «Запуск от имени администратора».

Способ 4

Попробуйте временно отключить все защитные программы вашего компьютера, которые могут препятствовать работе Steam: антивирус, брандмауэр (межсетевой экран), VPN клиент (если есть).

Если это помогло, добавьте Steam в исключения и запустите программы заново. Если вы выходите в сеть через VPN клиент, отключайте его на время игры.

Способ 5

Если ошибка выскакивает на игре, которая была скачана не из каталога Steam, возможно вы ее неправильно добавили в свою библиотеку. Прочитайте инструкцию Как добавить стороннюю игру в Steam и как активировать ключ.

Советы

Это поможет избежать повторения ошибки в будущем.

Источник

Загрузил: Let S Fix It

Длительность: 50 сек

Steamstartup Failed Missing Interface Fix Without Disabling Steam Portal Halflife Etc

Top 10 Tips To Get Perfect Aim In Cs Go

300 Ways To Die In Team Fortress 2 Sfm 3 Compilations In 1

Counterstrike Source De Dust 2 Gameplay

What To Do After Global Cs Go

How To Fix Steam Dll Error Any Steam Games

Setup File Gameinfo Txt Doesn T Exist Fix Source Games

Tommy Makes Garry S Mod Stupidly Funny

Angry Squeaker On A Trade Server Tf2

Realistic Shooter Games And Military Simulation In Under 10 Minutes

Cs Go Zombie Escape Mod Ze Iamlegend P2 Gamersunitedclan

Исправляем Проблему Failed To Initalize Authentication Interface Exiting

Cara Mengatasi Internal Error 0X0B Interface Config Missing Pada Game Crack Simpel Banget

Как Пройти Portal 2 За Час Разбор Спидрана

Team Fortress 2 Rap By Jt Music Meet The Crew

Scroll Vs Autohop The Heated Bunny Hop Debate

The Best Portal 2 Mod You Probably Haven T Played Yet

Top Cfg For Cs Go 2018

Counter Strike Source Inferno Gameplay 2012

Tu Tu Hai Wahi Remix Vaishali

Amv Nambaka Little Do You Know

Blerim Hakra Jetim

Drink My Piss You Nasty Yeah Yeah

Песня Санса На Русском

Не Зови Не Слышу Аня Воробей И Владимир Захаров

Духтаракои Гарми Туёна 2021

Время Не Лечит Funny Friends

Kygo Carry Me Vinil Remix Free Download

Twin Peaks Vegas Jam Original Mix

Сакит Самедов Буба Буба

Интервью Дженсена Эклза От Кессиди Гард Русская Озвучка

Немецкий Опыт Вакцинации Свиней Как Уменьшить Затраты На Вакцинацию И Не Допустить Вспышек Инфекции

Fix Steamstartup Failed Missing Interface

Part 3 Of David Longdon Memorial Service In London Uk

Не Третье Время На Осуждения И Обиды Сильные Слова

Lo Fi Type Beat I Ll Love You Forever Free

Cara Pasang Tempered Glass Dan Mengatasi Jika Masuk Angin

Детская Исправительная Колония Документальный Фильм Про Зону Малолетка

Юлия Михальчик Луна Подруга И Другие Песни Красная Пресня 14 07 2019

Ne Feyk Сделай Меня Счастливым Минус

808 Hard Bass Trap Instrumental Prod By Arsenio Beats

Azeri Bass Music Zor Haminin Axtardigi Mahni Gulpenbe 2019 Yeni

Tingle Frenzy Close Up Whisper Mouth Sounds Sticky Tapping Asmr

Кайфуем В Цвет Карен Черноморских

Lil Peep X Uicideboy Cross Amw

Procharged 2020 Zl1 Camaro Will It Make 1 000 Rpm S9 E92

Источник