Internal error 8027

Trying to burn a number of USB sticks with an image and getting Inconsistancy error.  Internal Error 8027.  At least half of these drives are getting this error

Posted Jun 28, 2018 10:49 AM

Hey Ron,

I have a few questions about your setup…

————————————————————————————————————————

01. Is the system you are trying to image UEFI or Legacy?

02. Is the image you are trying to deploy UEFI or Legacy?

03. Does the image contain multiple partitions?

04. Have you checked the image source and target for inconsistencies or bad sectors?

05. Have you checked the image itself for corruption or damage?

06. Does the image operation take place in WinPE or production?

    A. If imaging is occuring in WinPE, what version of WinPE are you using?

    B. If imaging is occuring in production, what are your source and destination values?

07. What format are the USB drives — exFAT/FAT32/NTFS/?

08. Have you tried formating the USB drives?

    A. If you have attempted to format the USB drives, what process are you using to accomplish this?

09. What brand (Manufacturer) are the USB drives?

10. What version are the USB drives — USB 2.0/3.0?

11. What version USB ports are you using on the target system — USB 2.0/3.0?

12. Have you checked the USB drives for inconsistencies or bad sectors?

13. Have you tried a different image than the one you are having problems with?

14. Have you tried a different USB drive than the ones you are haveing problems with?

15. Do you have access to a newer version of ghost such as version 12?

————————————————————————————————————————

Please report back and we will try and help you figure this out?

Содержание

  1. Error 8027 Symantec Ghost
  2. Error 8027 — Symantec Ghost 8.2 Ghost Solution Suite
  3. internal error 8027 Ghost Solution Suite
  4. (Solved) Ghost 8027 Tutorial — winload.org
  5. Symantec Ghost Abort 8027 Solution PCRPR
  6. Ghost 15 8027 error Norton Community
  7. Internal Error 8027 An Internal inconsistency has been .
  8. Solved: internal error 8027 — VOX
  9. Ghost 15 8027 error гѓЋгѓјгѓ€гѓі コミュニティ — Norton
  10. HЖ°б»›ng dбє«n khбєЇc phục không ghost Д‘Ж°б»Јc trên б»• cб»©ng SSD
  11. Error 8027 Symantec Ghost Fixes & Solutions
  12. Ghost internal error 8027
  13. Ghost internal error 8027
  14. Hardware
  15. General discussion
  16. Internal Error 8027 An Internal inconsistency has been detected
  17. All Comments
  18. P.S. if actually anyone cares to take a look at the error meassge:

Error 8027 Symantec Ghost

We have collected for you the most relevant information on Error 8027 Symantec Ghost, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Error 8027 Symantec Ghost before you, so use the ready-made solutions.

Error 8027 — Symantec Ghost 8.2 Ghost Solution Suite

    https://community.broadcom.com/symantecenterprise/viewthread?MessageKey=5cf066d7-767c-41e0-a749-9661cac3b54c&CommunityKey=a09bf38e-384d-4845-af76-32036f4fedee&tab=digestviewer
    Nov 16, 2008 · Hidden page that shows all messages in a thread. When Ghost did this, it should have tried to write out a file called GHOSTERR.TXT which contains all the internal diagnostic information we’ll need to figure out the cause of the problem.

internal error 8027 Ghost Solution Suite

    https://community.broadcom.com/symantecenterprise/viewthread?MessageKey=e84b9633-704a-406b-8775-ea0a786efd33&CommunityKey=a09bf38e-384d-4845-af76-32036f4fedee&tab=digestviewer
    Nov 04, 2015 · There is a later version of the ghost bianaries if you download the ghost standard tools and then the ghost standard tools hf2 you can get the latest ghost executables to test with. You can either use the boot wiz that will create you a new pe5 boot disk or add the ghost executables to your existing boot disk for a quick test.

(Solved) Ghost 8027 Tutorial — winload.org

    http://winload.org/ghost-8027.html
    Symantec Ghost Internal Error 8027 Education Services Maximize your product competency and validate technical even running ghost from the bootdisc. Adware and Spyware can radically effect your personal computer’s these resources.

Symantec Ghost Abort 8027 Solution PCRPR

    http://www.pcrpr.com/tag/symantec-ghost-abort-8027-solution
    The Symantec Ghost Abort 8027 Solution error code is the numerical data format of the error generated. This is the standard error message format utilised by Microsoft Windows along with other Microsoft Windows compatible software programs and device driver providers.
    https://community.norton.com/de/node/235923
    I think you still mis-understood what I am trying to achieve. In my company we use GHOST to create bootable and OS images (including some pre-installed softwares), I used first GHOST 15 to create couple of floppy disks as bootable then booted up my win7 into it, afterwords ran GHOST.exe to get to ghost UI and asked ghost to create GHO image for entire harddisk.

Internal Error 8027 An Internal inconsistency has been .

    https://www.techrepublic.com/forums/discussions/internal-error-8027-an-internal-inconsistency-has-been-detected/
    Create a new discussion. If you’re asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.

Solved: internal error 8027 — VOX

    https://vox.veritas.com/t5/General-Veritas/internal-error-8027/td-p/766939
    Solved: Hi, I encountered «internal error 8027», before I restore my image to DL380pGen8 server. My platform is linux Debian with 3

Ghost 15 8027 error гѓЋгѓјгѓ€гѓі コミュニティ — Norton

    https://community.norton.com/ja/node/235923
    I think you still mis-understood what I am trying to achieve. In my company we use GHOST to create bootable and OS images (including some pre-installed softwares), I used first GHOST 15 to create couple of floppy disks as bootable then booted up my win7 into it, afterwords ran GHOST.exe to get to ghost UI and asked ghost to create GHO image for entire harddisk.

HЖ°б»›ng dбє«n khбєЇc phục không ghost Д‘Ж°б»Јc trên б»• cб»©ng SSD

    http://www.saomai.com.vn/chia-se-kinh-nghiem/huong-dan-khac-phuc-loi-khong-ghost-duoc-voi-o-cung-ssd-n82.html
    ChЖ°ЖЎng trình sбєЅ kích hoбєЎt phбє§n mб»Ѓm ghost lên vб»›i tбє­p lệnh Notrim sбєЅ tбєЎm dб»«ng bбєЎn có thб»ѓ khôi phục lбєЎi bбєЈn ghost lên phбє§n vùng б»• cб»©ng SSD mà không gбє·p lбєЎi lб»—i trên. Trên Д‘ây là toàn bб»™ hЖ°б»›ng dбє«n giúp các bбєЎn xб»­ lý Д‘Ж°б»Јc vấn Д‘б»Ѓ không Ghost Д‘Ж°б»Јc trên б»• cб»©ng SSD.

Error 8027 Symantec Ghost Fixes & Solutions

We are confident that the above descriptions of Error 8027 Symantec Ghost and how to fix it will be useful to you. If you have another solution to Error 8027 Symantec Ghost or some notes on the existing ways to solve it, then please drop us an email.

Источник

Ghost internal error 8027

Коллеги, для тех, кто испытывает трудности в создании загрузочной флешки, содержащей необходимые программы для работы с дисками, выкладываю образ небезызвестного диска, созданного на Philka.ru — MiniSV 2008.
Это загрузочный диск весом 100 мб, содержащий Partition Magic, Norton Ghost, утилиты от Acronis для клонирования и разбиения дисков, файл-эксплорер. Операционка — Windows PE. В архиве наличествует готовый образ под Norton Ghost для флешки плюс сам Norton Ghost 32, работающий под Windows.

Если заливаете образ на карточку большого объема (больше 2 гб), перед процедурой зайдите в Options — Fat32/64 и поставьте галку на «Fat32 conversion».

Сама процедура такова: запускаем Ghost, устанавливаем описанную настройку, затем: Local — Disk — From Image. Ищем образ, затем указываем, куда его залить. Будьте внимательны с буквой диска. Это должна быть вставленная карточка.

Во всех случаях перед заливкой образа на флешку проверьте ее на вирусы и сделайте полное форматирование. И избегайте называть любые диски и разделы кириллицей. Скажем, не «Система», а «System», или не «Карта», а «Card».

Данный образ у меня залит на SDHC карточку объемом 8 гб. Карточка все время в кардридере ноутбука. При необходимости использования MiniSV я просто загружаюсь с карты через esc. На этой же карточке храню дистрибутив Windows XP, файлы бекапа, драйвера и т.п.

На всякий случай, для тех, у кого не получается загрузиться с флешки, выкладываю оригинал загрузочного CD. Образ в виде iso-файла. Диск прожигается практически любой программой для записи дисков.

Добавлено: образ загрузочной флешки, содержащей только Acronis True Image и Acronis Disk Director. Размер образа около 32 мб.
Берем здесь

Сообщение отредактировал Shoore — 14.07.16, 20:31

Источник

Ghost internal error 8027

Samsung Omnia II — Android OS
i8000, WiTu AMOLED

  • Представленный в данной теме материал является неофициальным! В случае неудачной установки или гибели аппарата автор ПО и Администрация ресурса ответственности не несут! Все действия производятся на Ваш страх и риск! За холивары WM vs Android-бан. Прежде чем спросить что-либо, используйте поиск по теме или читайте тему.
  • Изображения убирайте под спойлер! Посты по форматированию памяти, обсуждению игр, просьбы о новых сборках, вопросы почему не работает видео и где взять русскую клавиатуру-будут удалятся, ибо это все есть в теме!
  • У кого девайсы с «похожим железом», с вероятностью 99% сборка не подойдет и не задавайте вопросов «почему? но железо то одинаковое». Разные девайсы-разные материнки, разные производители-разные драйвера. Пример-Jet и Omnia II. Исключение-B7620 (касается alfa 1, alfa 2, beta)
  • Сайт команды по портированию (almar, bs, phj) | Twitter Альмара | Проект на Google Code | сайт Modaco — Froyo 2.2 beta 2

Сообщение отредактировал speedstar — 30.12.12, 16:15

Прошивка очень нужна. Андроид на таком железе сделает из телефона конфетку. Как только прошивка будет доведена до ума, переезжаю на нее. Стоит ли надеяться, что со временем будут реализованы все возможности железа? Хотя бы юсб, блютус, кнопки и чтение карт. Об ускорении и гпс даже не говорю.

Сообщение отредактировал manul1 — 20.07.10, 10:17

Возможности реализованы будут.Сейчас коллеги с забугорного сайта работают над оптимизицей порта на наш девайс-увеличение мощности,доступной андроиду.Сейчас процессор работает только на 133Мгц.Планируется «увеличить доступные МГц»,а так же объем доступной памяти.
С кнопками,я думаю,скоро уже все решится,способ найден,дело за реализацией.

Сообщение отредактировал manul1 — 06.04.10, 20:39

Источник

Hardware

General discussion

Internal Error 8027 An Internal inconsistency has been detected

by roise4000 · about 14 years, 9 months ago

I want to back up my c: partition on my USB external hard rive.
my partition is NTFS and my external is FAT32. every time i try it, i get the “Internal Error 8027 An Internal inconsistency has been detected… bl;ablabla”

the only way i can start an actual imaging process is by selecting “Image all – sector by sector copying” option on the ghost options before starting the imaging. This of course is not an option because i tried it yesterday and it took it like 8 hours to finally tell me there is not enough free space on a 30GB free external drive to put an image compressed in HIGH that by itself it’s just above 36GB? so… i need to image only the C: partition and not all the disk sector-by-sector.

P.S. if actually anyone cares to take a look at the error meassge:

by roise4000 · about 14 years, 9 months ago

*********************************
Date : Thu Apr 10 11:11:11 2008
Error Number: (8027)
Message: A GeneralException occurred
Version: 11.0.1.1533 (Apr 19 2007, Build=1533)
OS Version: DOS v7.10
Command line arguments:
Active Switches :
AutoName
PathName :
DumpFile : 2.1:Gateway-Comp1gate-comp1.GHO
DumpPos : 5632
Last LFO Buffersize : 32768
Last LFO Path :
Full Path : 2.1:Gateway-Comp1gate-comp1.GHO
Disk:Partition : 2:1
Last LFO Filesystem : Proprietary
Last LFO Error : Filesystem error (2): File or directory does not exist
Last LFO Error Path :
Full Path : 2.1:Gateway-Comp1gate-comp1.GHO
Disk:Partition : 2:1
FlagImplode : 3
FlagExplode : 0

Operation Details :
Total size………0
MB copied……….0
MB remaining…….0
Percent complete…0%
Speed…………..0 MB/min
Time elapsed…….0:00
Time remaining…..0:00

A memory allocation failed
Generated at NewHandlerThrow.cpp:108

Program Call Stack
NewHandlerThrow::handler
ntIndex::setNTFSPrtSize
imgIndex::setNTFSPrtSize
DumpNTFSPartition
ProcessNTFSPartition
CopyPartition
ProcessAllPartitions
CopyAllPartitions
CopyPartToFile
CopyMainline
AttemptOperation
sub_main
main

Call Stack
0x00397a4c
0x00397d77
0x00395b74
0x00394f9b
0x0039552a
0x003b2c1f
0x003b2cab
0x0009abaa
0x00099df7
0x0001701d
0x00019776
0x000c9984
0x000c92db
0x000c9171
0x000c69e1
0x0000222b
0x00002374
0x00005057
0x00003f2f
0x003a0c78
End Call Stack

Start heap available: 3932160
Cur heap available: 1703936
Total Memory: 11468800

Allocated
1024 DpmiDjgpp.cpp:56
33504 ghost.cpp:1396
48 DiskDriveAccessExInt13.cpp:139
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
Free
64 GetDriveType.cpp:111
512 DiskDriveAccessInt13.cpp:184
32768 AlignBufferedImageFileDevice.cpp:89

Fat details:
SRC:
FatType……….32
firstSector…….16128
ClusterSize……8192
clusters………1604926
root_next_avail..0
data_next_avail..0
dir_sector…….0
root_sector……25112
data_sector……25112
FAT_sector…….0

NTFS Global Flags:
—————-
contiguousWrite=1 forceDiskClusterMapping=0
inhibitCHKDSK=1 ignoreBadLog=0 ignoreCHKDSKBit=0
enable_cache=0 xfrbuflen=0
last_attr_type = 0
loadExact = 0
—————-
=======================================================
NTFS volume 0:
—————-
initialised…………..1
read cached…………..N
Selective caching……..N
flags………………..Volume OK
drive………………..0x00
part order……………1
version………………0x0400
volsize………………286856639
blocksize…………….512
clusterfactor…………8
clustersize…………..4096
mftrecordsize…………1024
indexrecordsize……….4096
indexclustperrecord……1
bootSectorCopyOffset…..286856639
pagefileSys…………..-1
bootIni………………20507
volumeLabel…………..[SYSTEM]
sectorsInUse………….64077160
totalNonCopiedBytes……4318035968
bytesToCopy…………..0
bitmapClusters………..1095
bitmapUsedBytes……….4482136
estimatedClusters……..1095
estimatedUsedBytes…….4482136
clustersizeShift………12
blocksizeShift………..9
mftrecordsizeShift…….10
indexrecordsizeShift…..12
totalRootMftRecs………206497
clustermap failover……N
Boot sector details
name………………..[NTFS ]
blocksize……………512
clusterfactor………..8
reservedSectorsUnused…0
mediaType……………0xf8
secPerTrack………….63
numHeads…………….255
hiddenSectors………..25720065
volsize……………..286856639
mftcluster…………..786432
mftmirrorcluster……..17928539
clustersPerMFTRecord….246
clustersPerIndexBuffer..1

—————————————————
Cluster Allocation Map
—————————————————
Start: 35857079 Length: 0 Next: 35857079

Disk Info :
remote………….0
drive…………..0
sectorsUsedCount…….312560577
estimatedUsedCount…..55643497
numPartitions…………..1
Version…………1101

# Ord Boot Id Ext First Num Last Used NTFS
0 1 1 7 No 25720065 286856640 312576705 64077160 Yes

Disk Info :
remote………….0
drive…………..0
sectorsUsedCount…….0
estimatedUsedCount…..0
numPartitions…………..0
Version…………0

# Ord Boot Id Ext First Num Last Used NTFS

Drive 128 WDC WD1600JS-22MHB0 WD-WCANM4120014
Int 13h
Total Sectors 16434495
Bytes per Sector 512
MB 8024
Cylinders 1023
Heads 255
Sectors per Track 63
Successful IO Count 0

Extended Int 13h
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Successful IO Count 0

IDE using PIO
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 0

IDE using UDMA (Active)
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 7074

Drive Hitachi HTS541680J9AT00 SB2O SB0242SGDT6BDH
ASPI (Active)
Total Sectors 156301488
Bytes per Sector 512
MB 76319
Successful IO Count 39

Drive 0
Int 13h (Active)
Total Sectors 2880
Bytes per Sector 512
MB 1
Cylinders 80
Heads 2
Sectors per Track 18
Successful IO Count 1

Remote Drives
AsyncIo : 0
Image Devices

Key[1] 1.1:
Key[2] 1:1
Key[3] C:
Path C:
Desc C: 1.1: [STORAGE]
Type FAT
Disk 0
Offset 16128

Key[1] 1.2:
Key[2] 1:2
Path 1.2:
Desc 1.2: [SYSTEM]
Type NTFS
Disk 0
Offset 25720065

Key[1] 2.1:
Key[2] 2:1
Path 2.1:
Desc 2.1: []
Type FAT
Disk 1
Offset 63

Key[1] A:
Path A:
Desc A:
Type Floppy

Key[1] D:
Path D:
Desc D: [RAMDRIVE]
Type Disk

Key[1] E:
Path E:
Desc E: []
Type CD

Key[1] @CD-R1
Path @CD-R1
Desc @CD-R1 LITE-ON DVDRW SOHW-1633S
Type DVD

Conventional Memory
Initial Conventional Memory Size = 416752
Current Conventional Memory Size = 346640

Allocated
1024 DpmiDjgpp.cpp:56
33504 ghost.cpp:1396
48 DiskDriveAccessExInt13.cpp:139
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
Free
64 GetDriveType.cpp:111
512 DiskDriveAccessInt13.cpp:184
32768 AlignBufferedImageFileDevice.cpp:89

Drive 128 WDC WD1600JS-22MHB0 WD-WCANM4120014
Int 13h
Total Sectors 16434495
Bytes per Sector 512
MB 8024
Cylinders 1023
Heads 255
Sectors per Track 63
Successful IO Count 0

Extended Int 13h
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Successful IO Count 0

IDE using PIO
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 0

IDE using UDMA (Active)
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 7074

Drive Hitachi HTS541680J9AT00 SB2O SB0242SGDT6BDH
ASPI (Active)
Total Sectors 156301488
Bytes per Sector 512
MB 76319
Successful IO Count 39

Drive 0
Int 13h (Active)
Total Sectors 2880
Bytes per Sector 512
MB 1
Cylinders 80
Heads 2
Sectors per Track 18
Successful IO Count 1

The following devices do not use an IRQ:
(0x00, 0x00, 0x00): IRQ: 0x00, INT#: -, Link: 0x00
Class: Bridge, SubClass: Host/PCI
Vendor: 0x8086, Device: 0x2580, RoutePINS: 0x60, 0x61, 0x00, 0x00,
(0x00, 0x1e, 0x00): IRQ: 0xff, INT#: -, Link: 0x00
Class: Bridge, SubClass: Sub Decode PCI/PCI
Vendor: 0x8086, Device: 0x244e, RoutePINS: 0x61, 0x68, 0x00, 0x00,
(0x00, 0x1f, 0x00): IRQ: 0x00, INT#: -, Link: 0x00
Class: Bridge, SubClass: PCI/ISA
Vendor: 0x8086, Device: 0x2640, RoutePINS: 0x62, 0x63, 0x00, 0x00,
The following hard wire-ord devices share IRQ 11:
(0x00, 0x02, 0x00): IRQ: 0x0b, INT#: A, Link: 0x60
Class: Display, SubClass: VGA compatible
Vendor: 0x8086, Device: 0x2582, RoutePINS: 0x60, 0x00, 0x00, 0x00,
(0x00, 0x1b, 0x00): IRQ: 0x0b, INT#: A, Link: 0x60
Class: Multimedia, SubClass: Unknown Multimedia
Vendor: 0x8086, Device: 0x2668, RoutePINS: 0x60, 0x00, 0x00, 0x00,
(0x00, 0x1c, 0x01): IRQ: 0xff, INT#: B, Link: 0x60
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2662, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x00, 0x1d, 0x03): IRQ: 0x0b, INT#: D, Link: 0x60
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x265b, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
The following hard wire-ord devices share IRQ 9:
(0x00, 0x1c, 0x00): IRQ: 0xff, INT#: A, Link: 0x61
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2660, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x02, 0x00, 0x00): IRQ: 0x09, INT#: A, Link: 0x61
Class: Network, SubClass: Ethernet
Vendor: 0x11ab, Device: 0x4361, RoutePINS: 0x61, 0x62, 0x63, 0x60,
(0x05, 0x05, 0x00): IRQ: 0x09, INT#: A, Link: 0x61
Class: Serial Bus, SubClass: IEEE 1394 OpenHCI
Vendor: 0x11c1, Device: 0x5811, RoutePINS: 0x61, 0x68, 0x6a, 0x69,
The following hard wire-ord devices share IRQ 11:
(0x00, 0x1c, 0x02): IRQ: 0xff, INT#: C, Link: 0x62
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2664, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x00, 0x1d, 0x02): IRQ: 0x0b, INT#: C, Link: 0x62
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x265a, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
(0x00, 0x1f, 0x01): IRQ: 0x0b, INT#: A, Link: 0x62
Class: Mass Storage, SubClass: IDE Controller
Vendor: 0x8086, Device: 0x266f, RoutePINS: 0x62, 0x63, 0x00, 0x00,
The following hard wire-ord devices share IRQ 11:
(0x00, 0x1c, 0x03): IRQ: 0xff, INT#: D, Link: 0x63
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2666, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x00, 0x1d, 0x01): IRQ: 0x0b, INT#: B, Link: 0x63
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x2659, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
(0x00, 0x1f, 0x02): IRQ: 0x0b, INT#: B, Link: 0x63
Class: Mass Storage, SubClass: IDE Controller
Vendor: 0x8086, Device: 0x2651, RoutePINS: 0x62, 0x63, 0x00, 0x00,
(0x00, 0x1f, 0x03): IRQ: 0x0b, INT#: B, Link: 0x63
Class: Serial Bus, SubClass: SMBUS
Vendor: 0x8086, Device: 0x266a, RoutePINS: 0x62, 0x63, 0x00, 0x00,
The following hard wire-ord devices share IRQ 10:
(0x00, 0x1d, 0x00): IRQ: 0x0a, INT#: A, Link: 0x6b
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x2658, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
(0x00, 0x1d, 0x07): IRQ: 0x0a, INT#: A, Link: 0x6b
Class: Serial Bus, SubClass: USB EHCI
Vendor: 0x8086, Device: 0x265c, RoutePINS: 0x6b, 0x63, 0x62, 0x60,

Volume 1
VolumePos: 1.1:
DriveLetter: C:
Description: 12.26GB Logical Disk 0 Offset 7.87MB 12.26GB WDC WD1600JS-22MHB0 WD-WCANM4120014
Type: fsfFat32
Name: STORAGE

Volume 2
VolumePos: 1.2:
DriveLetter:
Description: 136.78GB Primary Disk 0 Offset 12.26GB 136.78GB WDC WD1600JS-22MHB0 WD-WCANM4120014
Type: fsfNtfsWindowsXP
Name: SYSTEM

Volume 3
VolumePos: 2.1:
DriveLetter:
Description: 74.53GB Primary Disk 1 Offset 31.50KB 74.53GB Hitachi HTS541680J9AT00 SB2O SB0242SGDT6BDH
Type: fsfFat32
Name:

Filesystem Index: 0
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: A:
DriveType: 2
No FilesystemInfo structure.
Filesystem has no VolumePtr

Filesystem Index: 1
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: C:
ID Type: 1
ID: 1.1:
ID Type: 4
ID: STORAGE:
DriveType: 4
FilesystemInfo:
formatType: 3
volumeName: STORAGE

Filesystem Index: 2
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: D:
DriveType: 32
No FilesystemInfo structure.
Filesystem has no VolumePtr

Filesystem Index: 3
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: E:
DriveType: 8
No FilesystemInfo structure.
Filesystem has no VolumePtr

Filesystem Index: 4
Filesystem Descriptor:
ID’s:
ID Type: 1
ID: 1.2:
ID Type: 4
ID: SYSTEM:
DriveType: 4
FilesystemInfo:
formatType: 8
volumeName: SYSTEM

Filesystem Index: 5
Filesystem Descriptor:
ID’s:
ID Type: 1
ID: 2.1:
DriveType: 4
FilesystemInfo:
formatType: 3
volumeName:

Источник

Internal error 8027 ghost

Коллеги, для тех, кто испытывает трудности в создании загрузочной флешки, содержащей необходимые программы для работы с дисками, выкладываю образ небезызвестного диска, созданного на Philka.ru — MiniSV 2008.
Это загрузочный диск весом 100 мб, содержащий Partition Magic, Norton Ghost, утилиты от Acronis для клонирования и разбиения дисков, файл-эксплорер. Операционка — Windows PE. В архиве наличествует готовый образ под Norton Ghost для флешки плюс сам Norton Ghost 32, работающий под Windows.

Если заливаете образ на карточку большого объема (больше 2 гб), перед процедурой зайдите в Options — Fat32/64 и поставьте галку на «Fat32 conversion».

Сама процедура такова: запускаем Ghost, устанавливаем описанную настройку, затем: Local — Disk — From Image. Ищем образ, затем указываем, куда его залить. Будьте внимательны с буквой диска. Это должна быть вставленная карточка.

Во всех случаях перед заливкой образа на флешку проверьте ее на вирусы и сделайте полное форматирование. И избегайте называть любые диски и разделы кириллицей. Скажем, не «Система», а «System», или не «Карта», а «Card».

Данный образ у меня залит на SDHC карточку объемом 8 гб. Карточка все время в кардридере ноутбука. При необходимости использования MiniSV я просто загружаюсь с карты через esc. На этой же карточке храню дистрибутив Windows XP, файлы бекапа, драйвера и т.п.

На всякий случай, для тех, у кого не получается загрузиться с флешки, выкладываю оригинал загрузочного CD. Образ в виде iso-файла. Диск прожигается практически любой программой для записи дисков.

Добавлено: образ загрузочной флешки, содержащей только Acronis True Image и Acronis Disk Director. Размер образа около 32 мб.
Берем здесь

Сообщение отредактировал Shoore — 14.07.16, 20:31

Источник

Error 8027 Symantec Ghost

We have collected for you the most relevant information on Error 8027 Symantec Ghost, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Error 8027 Symantec Ghost before you, so use the ready-made solutions.

Error 8027 — Symantec Ghost 8.2 Ghost Solution Suite

    https://community.broadcom.com/symantecenterprise/viewthread?MessageKey=5cf066d7-767c-41e0-a749-9661cac3b54c&CommunityKey=a09bf38e-384d-4845-af76-32036f4fedee&tab=digestviewer
    Nov 16, 2008 · Hidden page that shows all messages in a thread. When Ghost did this, it should have tried to write out a file called GHOSTERR.TXT which contains all the internal diagnostic information we’ll need to figure out the cause of the problem.

internal error 8027 Ghost Solution Suite

    https://community.broadcom.com/symantecenterprise/viewthread?MessageKey=e84b9633-704a-406b-8775-ea0a786efd33&CommunityKey=a09bf38e-384d-4845-af76-32036f4fedee&tab=digestviewer
    Nov 04, 2015 · There is a later version of the ghost bianaries if you download the ghost standard tools and then the ghost standard tools hf2 you can get the latest ghost executables to test with. You can either use the boot wiz that will create you a new pe5 boot disk or add the ghost executables to your existing boot disk for a quick test.

(Solved) Ghost 8027 Tutorial — winload.org

    http://winload.org/ghost-8027.html
    Symantec Ghost Internal Error 8027 Education Services Maximize your product competency and validate technical even running ghost from the bootdisc. Adware and Spyware can radically effect your personal computer’s these resources.

Symantec Ghost Abort 8027 Solution PCRPR

    http://www.pcrpr.com/tag/symantec-ghost-abort-8027-solution
    The Symantec Ghost Abort 8027 Solution error code is the numerical data format of the error generated. This is the standard error message format utilised by Microsoft Windows along with other Microsoft Windows compatible software programs and device driver providers.

Ghost 15 8027 error Norton Community

    https://community.norton.com/de/node/235923
    I think you still mis-understood what I am trying to achieve. In my company we use GHOST to create bootable and OS images (including some pre-installed softwares), I used first GHOST 15 to create couple of floppy disks as bootable then booted up my win7 into it, afterwords ran GHOST.exe to get to ghost UI and asked ghost to create GHO image for entire harddisk.

Internal Error 8027 An Internal inconsistency has been .

    https://www.techrepublic.com/forums/discussions/internal-error-8027-an-internal-inconsistency-has-been-detected/
    Create a new discussion. If you’re asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.

Solved: internal error 8027 — VOX

    https://vox.veritas.com/t5/General-Veritas/internal-error-8027/td-p/766939
    Solved: Hi, I encountered «internal error 8027», before I restore my image to DL380pGen8 server. My platform is linux Debian with 3

Ghost 15 8027 error гѓЋгѓјгѓ€гѓі コミュニティ — Norton

    https://community.norton.com/ja/node/235923
    I think you still mis-understood what I am trying to achieve. In my company we use GHOST to create bootable and OS images (including some pre-installed softwares), I used first GHOST 15 to create couple of floppy disks as bootable then booted up my win7 into it, afterwords ran GHOST.exe to get to ghost UI and asked ghost to create GHO image for entire harddisk.

HЖ°б»›ng dбє«n khбєЇc phục không ghost Д‘Ж°б»Јc trên б»• cб»©ng SSD

    http://www.saomai.com.vn/chia-se-kinh-nghiem/huong-dan-khac-phuc-loi-khong-ghost-duoc-voi-o-cung-ssd-n82.html
    ChЖ°ЖЎng trình sбєЅ kích hoбєЎt phбє§n mб»Ѓm ghost lên vб»›i tбє­p lệnh Notrim sбєЅ tбєЎm dб»«ng bбєЎn có thб»ѓ khôi phục lбєЎi bбєЈn ghost lên phбє§n vùng б»• cб»©ng SSD mà không gбє·p lбєЎi lб»—i trên. Trên Д‘ây là toàn bб»™ hЖ°б»›ng dбє«n giúp các bбєЎn xб»­ lý Д‘Ж°б»Јc vấn Д‘б»Ѓ không Ghost Д‘Ж°б»Јc trên б»• cб»©ng SSD.

Error 8027 Symantec Ghost Fixes & Solutions

We are confident that the above descriptions of Error 8027 Symantec Ghost and how to fix it will be useful to you. If you have another solution to Error 8027 Symantec Ghost or some notes on the existing ways to solve it, then please drop us an email.

Источник

Hardware

General discussion

Internal Error 8027 An Internal inconsistency has been detected

by roise4000 · about 14 years, 9 months ago

I want to back up my c: partition on my USB external hard rive.
my partition is NTFS and my external is FAT32. every time i try it, i get the “Internal Error 8027 An Internal inconsistency has been detected… bl;ablabla”

the only way i can start an actual imaging process is by selecting “Image all – sector by sector copying” option on the ghost options before starting the imaging. This of course is not an option because i tried it yesterday and it took it like 8 hours to finally tell me there is not enough free space on a 30GB free external drive to put an image compressed in HIGH that by itself it’s just above 36GB? so… i need to image only the C: partition and not all the disk sector-by-sector.

All Comments

P.S. if actually anyone cares to take a look at the error meassge:

by roise4000 · about 14 years, 9 months ago

*********************************
Date : Thu Apr 10 11:11:11 2008
Error Number: (8027)
Message: A GeneralException occurred
Version: 11.0.1.1533 (Apr 19 2007, Build=1533)
OS Version: DOS v7.10
Command line arguments:
Active Switches :
AutoName
PathName :
DumpFile : 2.1:Gateway-Comp1gate-comp1.GHO
DumpPos : 5632
Last LFO Buffersize : 32768
Last LFO Path :
Full Path : 2.1:Gateway-Comp1gate-comp1.GHO
Disk:Partition : 2:1
Last LFO Filesystem : Proprietary
Last LFO Error : Filesystem error (2): File or directory does not exist
Last LFO Error Path :
Full Path : 2.1:Gateway-Comp1gate-comp1.GHO
Disk:Partition : 2:1
FlagImplode : 3
FlagExplode : 0

Operation Details :
Total size………0
MB copied……….0
MB remaining…….0
Percent complete…0%
Speed…………..0 MB/min
Time elapsed…….0:00
Time remaining…..0:00

A memory allocation failed
Generated at NewHandlerThrow.cpp:108

Program Call Stack
NewHandlerThrow::handler
ntIndex::setNTFSPrtSize
imgIndex::setNTFSPrtSize
DumpNTFSPartition
ProcessNTFSPartition
CopyPartition
ProcessAllPartitions
CopyAllPartitions
CopyPartToFile
CopyMainline
AttemptOperation
sub_main
main

Call Stack
0x00397a4c
0x00397d77
0x00395b74
0x00394f9b
0x0039552a
0x003b2c1f
0x003b2cab
0x0009abaa
0x00099df7
0x0001701d
0x00019776
0x000c9984
0x000c92db
0x000c9171
0x000c69e1
0x0000222b
0x00002374
0x00005057
0x00003f2f
0x003a0c78
End Call Stack

Start heap available: 3932160
Cur heap available: 1703936
Total Memory: 11468800

Allocated
1024 DpmiDjgpp.cpp:56
33504 ghost.cpp:1396
48 DiskDriveAccessExInt13.cpp:139
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
Free
64 GetDriveType.cpp:111
512 DiskDriveAccessInt13.cpp:184
32768 AlignBufferedImageFileDevice.cpp:89

Fat details:
SRC:
FatType……….32
firstSector…….16128
ClusterSize……8192
clusters………1604926
root_next_avail..0
data_next_avail..0
dir_sector…….0
root_sector……25112
data_sector……25112
FAT_sector…….0

NTFS Global Flags:
—————-
contiguousWrite=1 forceDiskClusterMapping=0
inhibitCHKDSK=1 ignoreBadLog=0 ignoreCHKDSKBit=0
enable_cache=0 xfrbuflen=0
last_attr_type = 0
loadExact = 0
—————-
=======================================================
NTFS volume 0:
—————-
initialised…………..1
read cached…………..N
Selective caching……..N
flags………………..Volume OK
drive………………..0x00
part order……………1
version………………0x0400
volsize………………286856639
blocksize…………….512
clusterfactor…………8
clustersize…………..4096
mftrecordsize…………1024
indexrecordsize……….4096
indexclustperrecord……1
bootSectorCopyOffset…..286856639
pagefileSys…………..-1
bootIni………………20507
volumeLabel…………..[SYSTEM]
sectorsInUse………….64077160
totalNonCopiedBytes……4318035968
bytesToCopy…………..0
bitmapClusters………..1095
bitmapUsedBytes……….4482136
estimatedClusters……..1095
estimatedUsedBytes…….4482136
clustersizeShift………12
blocksizeShift………..9
mftrecordsizeShift…….10
indexrecordsizeShift…..12
totalRootMftRecs………206497
clustermap failover……N
Boot sector details
name………………..[NTFS ]
blocksize……………512
clusterfactor………..8
reservedSectorsUnused…0
mediaType……………0xf8
secPerTrack………….63
numHeads…………….255
hiddenSectors………..25720065
volsize……………..286856639
mftcluster…………..786432
mftmirrorcluster……..17928539
clustersPerMFTRecord….246
clustersPerIndexBuffer..1

—————————————————
Cluster Allocation Map
—————————————————
Start: 35857079 Length: 0 Next: 35857079

Disk Info :
remote………….0
drive…………..0
sectorsUsedCount…….312560577
estimatedUsedCount…..55643497
numPartitions…………..1
Version…………1101

# Ord Boot Id Ext First Num Last Used NTFS
0 1 1 7 No 25720065 286856640 312576705 64077160 Yes

Disk Info :
remote………….0
drive…………..0
sectorsUsedCount…….0
estimatedUsedCount…..0
numPartitions…………..0
Version…………0

# Ord Boot Id Ext First Num Last Used NTFS

Drive 128 WDC WD1600JS-22MHB0 WD-WCANM4120014
Int 13h
Total Sectors 16434495
Bytes per Sector 512
MB 8024
Cylinders 1023
Heads 255
Sectors per Track 63
Successful IO Count 0

Extended Int 13h
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Successful IO Count 0

IDE using PIO
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 0

IDE using UDMA (Active)
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 7074

Drive Hitachi HTS541680J9AT00 SB2O SB0242SGDT6BDH
ASPI (Active)
Total Sectors 156301488
Bytes per Sector 512
MB 76319
Successful IO Count 39

Drive 0
Int 13h (Active)
Total Sectors 2880
Bytes per Sector 512
MB 1
Cylinders 80
Heads 2
Sectors per Track 18
Successful IO Count 1

Remote Drives
AsyncIo : 0
Image Devices

Key[1] 1.1:
Key[2] 1:1
Key[3] C:
Path C:
Desc C: 1.1: [STORAGE]
Type FAT
Disk 0
Offset 16128

Key[1] 1.2:
Key[2] 1:2
Path 1.2:
Desc 1.2: [SYSTEM]
Type NTFS
Disk 0
Offset 25720065

Key[1] 2.1:
Key[2] 2:1
Path 2.1:
Desc 2.1: []
Type FAT
Disk 1
Offset 63

Key[1] A:
Path A:
Desc A:
Type Floppy

Key[1] D:
Path D:
Desc D: [RAMDRIVE]
Type Disk

Key[1] E:
Path E:
Desc E: []
Type CD

Key[1] @CD-R1
Path @CD-R1
Desc @CD-R1 LITE-ON DVDRW SOHW-1633S
Type DVD

Conventional Memory
Initial Conventional Memory Size = 416752
Current Conventional Memory Size = 346640

Allocated
1024 DpmiDjgpp.cpp:56
33504 ghost.cpp:1396
48 DiskDriveAccessExInt13.cpp:139
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
528 IdeDmaServerPci.cpp:127
Free
64 GetDriveType.cpp:111
512 DiskDriveAccessInt13.cpp:184
32768 AlignBufferedImageFileDevice.cpp:89

Drive 128 WDC WD1600JS-22MHB0 WD-WCANM4120014
Int 13h
Total Sectors 16434495
Bytes per Sector 512
MB 8024
Cylinders 1023
Heads 255
Sectors per Track 63
Successful IO Count 0

Extended Int 13h
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Successful IO Count 0

IDE using PIO
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 0

IDE using UDMA (Active)
Total Sectors 312581808
Bytes per Sector 512
MB 152627
Cylinders 16383
Heads 16
Sectors per Track 63
Successful IO Count 7074

Drive Hitachi HTS541680J9AT00 SB2O SB0242SGDT6BDH
ASPI (Active)
Total Sectors 156301488
Bytes per Sector 512
MB 76319
Successful IO Count 39

Drive 0
Int 13h (Active)
Total Sectors 2880
Bytes per Sector 512
MB 1
Cylinders 80
Heads 2
Sectors per Track 18
Successful IO Count 1

The following devices do not use an IRQ:
(0x00, 0x00, 0x00): IRQ: 0x00, INT#: -, Link: 0x00
Class: Bridge, SubClass: Host/PCI
Vendor: 0x8086, Device: 0x2580, RoutePINS: 0x60, 0x61, 0x00, 0x00,
(0x00, 0x1e, 0x00): IRQ: 0xff, INT#: -, Link: 0x00
Class: Bridge, SubClass: Sub Decode PCI/PCI
Vendor: 0x8086, Device: 0x244e, RoutePINS: 0x61, 0x68, 0x00, 0x00,
(0x00, 0x1f, 0x00): IRQ: 0x00, INT#: -, Link: 0x00
Class: Bridge, SubClass: PCI/ISA
Vendor: 0x8086, Device: 0x2640, RoutePINS: 0x62, 0x63, 0x00, 0x00,
The following hard wire-ord devices share IRQ 11:
(0x00, 0x02, 0x00): IRQ: 0x0b, INT#: A, Link: 0x60
Class: Display, SubClass: VGA compatible
Vendor: 0x8086, Device: 0x2582, RoutePINS: 0x60, 0x00, 0x00, 0x00,
(0x00, 0x1b, 0x00): IRQ: 0x0b, INT#: A, Link: 0x60
Class: Multimedia, SubClass: Unknown Multimedia
Vendor: 0x8086, Device: 0x2668, RoutePINS: 0x60, 0x00, 0x00, 0x00,
(0x00, 0x1c, 0x01): IRQ: 0xff, INT#: B, Link: 0x60
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2662, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x00, 0x1d, 0x03): IRQ: 0x0b, INT#: D, Link: 0x60
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x265b, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
The following hard wire-ord devices share IRQ 9:
(0x00, 0x1c, 0x00): IRQ: 0xff, INT#: A, Link: 0x61
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2660, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x02, 0x00, 0x00): IRQ: 0x09, INT#: A, Link: 0x61
Class: Network, SubClass: Ethernet
Vendor: 0x11ab, Device: 0x4361, RoutePINS: 0x61, 0x62, 0x63, 0x60,
(0x05, 0x05, 0x00): IRQ: 0x09, INT#: A, Link: 0x61
Class: Serial Bus, SubClass: IEEE 1394 OpenHCI
Vendor: 0x11c1, Device: 0x5811, RoutePINS: 0x61, 0x68, 0x6a, 0x69,
The following hard wire-ord devices share IRQ 11:
(0x00, 0x1c, 0x02): IRQ: 0xff, INT#: C, Link: 0x62
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2664, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x00, 0x1d, 0x02): IRQ: 0x0b, INT#: C, Link: 0x62
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x265a, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
(0x00, 0x1f, 0x01): IRQ: 0x0b, INT#: A, Link: 0x62
Class: Mass Storage, SubClass: IDE Controller
Vendor: 0x8086, Device: 0x266f, RoutePINS: 0x62, 0x63, 0x00, 0x00,
The following hard wire-ord devices share IRQ 11:
(0x00, 0x1c, 0x03): IRQ: 0xff, INT#: D, Link: 0x63
Class: Bridge, SubClass: PCI/PCI
Vendor: 0x8086, Device: 0x2666, RoutePINS: 0x61, 0x60, 0x62, 0x63,
(0x00, 0x1d, 0x01): IRQ: 0x0b, INT#: B, Link: 0x63
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x2659, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
(0x00, 0x1f, 0x02): IRQ: 0x0b, INT#: B, Link: 0x63
Class: Mass Storage, SubClass: IDE Controller
Vendor: 0x8086, Device: 0x2651, RoutePINS: 0x62, 0x63, 0x00, 0x00,
(0x00, 0x1f, 0x03): IRQ: 0x0b, INT#: B, Link: 0x63
Class: Serial Bus, SubClass: SMBUS
Vendor: 0x8086, Device: 0x266a, RoutePINS: 0x62, 0x63, 0x00, 0x00,
The following hard wire-ord devices share IRQ 10:
(0x00, 0x1d, 0x00): IRQ: 0x0a, INT#: A, Link: 0x6b
Class: Serial Bus, SubClass: USB UHCI
Vendor: 0x8086, Device: 0x2658, RoutePINS: 0x6b, 0x63, 0x62, 0x60,
(0x00, 0x1d, 0x07): IRQ: 0x0a, INT#: A, Link: 0x6b
Class: Serial Bus, SubClass: USB EHCI
Vendor: 0x8086, Device: 0x265c, RoutePINS: 0x6b, 0x63, 0x62, 0x60,

Volume 1
VolumePos: 1.1:
DriveLetter: C:
Description: 12.26GB Logical Disk 0 Offset 7.87MB 12.26GB WDC WD1600JS-22MHB0 WD-WCANM4120014
Type: fsfFat32
Name: STORAGE

Volume 2
VolumePos: 1.2:
DriveLetter:
Description: 136.78GB Primary Disk 0 Offset 12.26GB 136.78GB WDC WD1600JS-22MHB0 WD-WCANM4120014
Type: fsfNtfsWindowsXP
Name: SYSTEM

Volume 3
VolumePos: 2.1:
DriveLetter:
Description: 74.53GB Primary Disk 1 Offset 31.50KB 74.53GB Hitachi HTS541680J9AT00 SB2O SB0242SGDT6BDH
Type: fsfFat32
Name:

Filesystem Index: 0
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: A:
DriveType: 2
No FilesystemInfo structure.
Filesystem has no VolumePtr

Filesystem Index: 1
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: C:
ID Type: 1
ID: 1.1:
ID Type: 4
ID: STORAGE:
DriveType: 4
FilesystemInfo:
formatType: 3
volumeName: STORAGE

Filesystem Index: 2
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: D:
DriveType: 32
No FilesystemInfo structure.
Filesystem has no VolumePtr

Filesystem Index: 3
Filesystem Descriptor:
ID’s:
ID Type: 2
ID: E:
DriveType: 8
No FilesystemInfo structure.
Filesystem has no VolumePtr

Filesystem Index: 4
Filesystem Descriptor:
ID’s:
ID Type: 1
ID: 1.2:
ID Type: 4
ID: SYSTEM:
DriveType: 4
FilesystemInfo:
formatType: 8
volumeName: SYSTEM

Filesystem Index: 5
Filesystem Descriptor:
ID’s:
ID Type: 1
ID: 2.1:
DriveType: 4
FilesystemInfo:
formatType: 3
volumeName:

Источник

Понравилась статья? Поделить с друзьями:
  • Internal error 36000 ghost
  • Internal error 2908 при установке autocad
  • Internal error 2755 1632
  • Internal error 2732
  • Internal error 2503 windows 10