Internal error b109 13 cannot decompress setup program

0 Members and 1 Guest are viewing this topic.

1. 01-15-2017, 08:52 PM

   
   

   #1

   

   
   Registered
   

   ---

   I got my 4-axis USB 3040 last week and finally got to start setting up this weekend. I’m having trouble with drivers, as the controller just shows up as a generic HID device in Windows. So neither USBCNC nor Mach3/4 can see it.

   The controller is labeled BSMCE04U-Plus BITSENSOR.COM. That website is gone, and Google turns up nothing at all about either of those. (Pic below.) I’ve messaged the vendor, but I’m wondering if anybody can help ID this thing and more specifically what driver I should be using.

   Thanks!

   

   ---

2. 01-17-2017, 03:33 AM

   
   

   #2

   

   
   Registered
   

   ---

   Re: Help ID this controller in my Chinese 3040?
   

   So I heard back from the vendor. He sent me some old Mach3 software that is probably bootleg and doesn’t run anyway. Throws «INTERNAL ERROR B109-13: Cannot decompress setup program». Probably corrupted, or the Chinese language it’s in is freaking my PC out.

   I’m thinking about just replacing that board with one that’s supported properly. And I still haven’t bought the software yet (was trying to get the stupid thing to work, then play with mach3 mach4 CNCUSB and BobCAD and decide what to go with). This little $700 toy is getting expensive.

   Anyway, suggestions on the board replacement?

   ---

3. 01-17-2017, 06:15 AM

   
   

   #3

   Re: Help ID this controller in my Chinese 3040?
   

   DurocShark,

   Let me know if you would like help configuring your machine.

   Welcome to the Zone,

   Jeff…

   Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.

   ---

4. 01-17-2017, 03:54 PM

   
   

   #4

   

   
   Registered
   

   ---

   Re: Help ID this controller in my Chinese 3040?
   

   Thanks. I had an idea I’m going to try tonight.

   I was reading in a review of another generic USB controller that it would never work in a 64-bit environment, but worked fine in a 32-bit OS. So I’m cobbling together an old laptop and dropping Windows 7 32bit on it and testing. If that works, then I’ll try a VMWare virtual on my Win10 machine running that same Win7-32 operating system.

   I’ll update with the results.

   ---

5. 01-18-2017, 04:15 AM

   
   

   #5

   

   
   Registered
   

   ---

   Re: Help ID this controller in my Chinese 3040?
   

   WOOT! It’s working!

   It wasn’t 32-bit OS. I used the plugin DLL from the software package I got from the seller (with the non-functional Mach3 software) in a real Mach3 install on my laptop with Win10-32. A little fiddling and I got jog to work! WOOHOO!!!!

   The next step was to do the same on my real PC, running Win10-64. Aaaand… IT WORKED!

   So the DLL file is the key for this particular card. Now I can learn how to actually USE the thing.

   ---

6. 01-18-2017, 04:16 AM

   
   

   #6

   

   
   Registered
   

   ---

   Re: Help ID this controller in my Chinese 3040?
   

   If anybody’s curious, for my board it’s the RnRMotion.dll file that worked.

   ---

7. 01-18-2017, 05:19 AM

   
   

   #7

   

   
   Registered
   

   ---

   Re: Help ID this controller in my Chinese 3040?
   

   ---

8. 06-06-2017, 07:50 PM

   
   

   #8

   

   
   Registered
   

   ---

   Originally Posted by DurocShark
   

   I got my 4-axis USB 3040 last week and finally got to start setting up this weekend. I’m having trouble with drivers, as the controller just shows up as a generic HID device in Windows. So neither USBCNC nor Mach3/4 can see it.

   The controller is labeled BSMCE04U-Plus BITSENSOR.COM. That website is gone, and Google turns up nothing at all about either of those. (Pic below.) I’ve messaged the vendor, but I’m wondering if anybody can help ID this thing and more specifically what driver I should be using.

   Thanks!

   

   Hi here you go I got the exact same card in my controller here is the doll driver you need I made a copy.Not sure where it gets placed my guess windows doll folder, later Chimera1960

   ---

9. 06-08-2017, 04:19 PM

   
   

   #9

   

   
   Registered
   

   ---

   Re: Help ID this controller in my Chinese 3040?
   

   HI, I have the same board in my machine I just bought and I had no drivers either, But I found the correct one, so give me your email address and Ill send you a copy.

   Later Chris AKACHIMERA1960

   ---

10. 07-29-2017, 09:33 PM

    
    

    #10

    

    
    Registered
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Whats the microcontroller IC number that has been labelled on top with the «sort-of» glossy yellow sticker? Can you remove that lable and check? I doubt they might be using a PIC or a ARM based MCU.

    ---

11. 07-30-2017, 02:38 AM

    
    

    #11

    

    
    Registered
    

    ---

    Originally Posted by Power_user_EX
    

    Whats the microcontroller IC number that has been labelled on top with the «sort-of» glossy yellow sticker? Can you remove that lable and check? I doubt they might be using a PIC or a ARM based MCU.

    Hi power, well I took the sticker off and found no numbers that I can see it looks blank same as some of the other chips on this board I have which is a bitstream same pictured, I dumped it and bought a new board that has support and is absolute mach3 compatible and supported, I spent 4wks of my life trying to get this board working correctly and have giving up, it never worked correctly didn’t even have the e-stop working correctly even not at all no matter what I did it just wouldn’t work right, this board isn’t even supported the company i found makes security systems in china and its just not what its supposed to do and that is work correctly so my advise is if yours works great use it till it don’t if it doesn’t work correctly no matter what you do dump it as I did save your life its worth it.

    Sorry couldn’t help later CHIMERA1960

    ---

12. 07-30-2017, 01:13 PM

    
    

    #12

    

    
    Registered
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Originally Posted by CHIMERA1960
    

    Hi power, well I took the sticker off and found no numbers that I can see it looks blank same as some of the other chips on this board I have which is a bitstream same pictured, I dumped it and bought a new board that has support and is absolute mach3 compatible and supported, I spent 4wks of my life trying to get this board working correctly and have giving up, it never worked correctly didn’t even have the e-stop working correctly even not at all no matter what I did it just wouldn’t work right, this board isn’t even supported the company i found makes security systems in china and its just not what its supposed to do and that is work correctly so my advise is if yours works great use it till it don’t if it doesn’t work correctly no matter what you do dump it as I did save your life its worth it.

    Sorry couldn’t help later CHIMERA1960

    :O I hate it when manufacturers sand-off the IC numbers. Basically then there is no scope of hacking & modding. I have successfully used Arduino with grbl and cnc shield for my latest desktop cnc build but I want to get to back to mach again and was planning to buy a basic 4 axis Mach usb motion controller. Specifically these ones :
    https://www.aliexpress.com/item/mach…317951517.html
    =or=
    https://www.aliexpress.com/item/USB-…748586374.html (Read feedback #3)

    The latter on uses STM32 mcu. I am confused on which one should I buy.

    -Regards

    ---

13. 01-22-2018, 07:53 AM

    
    

    #13

    

    
    Registered
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Hello,

    I’v just bought this controller, and my problem is IP. Is there any way to find this number?
    Thank’s in advance

    Regards
    Amnon

    ---

14. 02-20-2018, 06:33 PM

    
    

    #14

    

    
    Member
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    I have the 6040 version of your machine that I started playing around with a week or so ago. Have the exact same card and went through the exact same trial and error with the software. I also had an issue with the e-stop not working with the Mach 3 version supplied with the machine and it did start working after I re-installed the software a second time. Everything else you state, the RNR motion .dll and such is pretty much spot on for what I discovered. I wish I would have found this post while I was working on mine as it would have saved me a few hours of frustration. I talked to the mach 3/4 guys via email and I think I am going to to go with their suggestion of swapping out the card with a PMDX board so I can run their mach 4 software. The cracked version that was supplied with the cnc pretty much runs everything as designed on my machine but will never have any possibilities of being able to add any enhancements or improvements from a user stand point.

    ---

15. 05-08-2018, 08:59 AM

    
    

    #15

    

    
    Registered
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Hi DurocShark
    i am trying to get my 600w spindle to work, but i can’t seem to figure it out, would you kindly help me. i dont have a VFD, just a motor PWM driver and a relay in the middle. I need to do PWM. I tried the AVI (supposedly the 0-10v), and output1 (supposedly on/off)

    ---

16. 05-08-2018, 03:17 PM

    
    

    #16

    

    
    Member
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Originally Posted by Khomouda
    

    Hi DurocShark
    i am trying to get my 600w spindle to work, but i can’t seem to figure it out, would you kindly help me. i dont have a VFD, just a motor PWM driver and a relay in the middle. I need to do PWM. I tried the AVI (supposedly the 0-10v), and output1 (supposedly on/off)

    I haven’t ever tried one with out a vfd but I would venture to guess that if you want to use the 0-10v output for from the controller you would need a relay that has a coil rated for the same voltage. The relay coil will pull in the contacts to power the motor once the coil specified voltage is applied to the closing coil of the relay. I am not sure if there are relays with a coil voltage in that range but if you check yours and the coil is of a higher voltage range you may search the internet and see what is out there. Also, keep in mind that the 0-10 volt output you have may also be variable so depending on the spindle speed being commanded it may output anything between 0 to 10 volts, where as a relay coil will want to see a constant voltage to close.

    ---

17. 10-25-2018, 06:20 PM

    
    

    #17

    

    
    Registered
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Originally Posted by smav
    

    I have the 6040 version of your machine…I also had an issue with the e-stop not working…

    What port and pin is your e-stop working on? Mine is connected to input 1, but I can’t find any sort of datasheet that tells me what port that corresponds to.

    Thanks!

    ---

18. 10-26-2018, 05:42 AM

    
    

    #18

    

    
    Member
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Originally Posted by DrewSmith007
    

    What port and pin is your e-stop working on? Mine is connected to input 1, but I can’t find any sort of datasheet that tells me what port that corresponds to.

    Thanks!

    on my mach 3 Under the «Engine Configuration…ports & pins» Input Signals tab mine is set to port 3, pin 1, and enabled has a green check mark for the e stop. I believe mine started working after I had ran the install a second time after starting over from scratch.

    ---

19. 10-26-2018, 06:10 AM

    
    

    #19

    

    
    Registered
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    Thanks, this is exactly what I needed. I actually found what appears to be a compatible manual, from the buildyourcnc mach3 interface board.

    https://buildyourcnc.com/Item/electr…ach3-USB-Board

    ---

20. 10-26-2018, 04:33 PM

    
    

    #20

    

    
    Member
    

    ---

    Re: Help ID this controller in my Chinese 3040?
    

    I was reading through the previous posts in this thread and saw where I had mentioned in a post about upgrading to a different controller and mach 4. I would like to add to that by saying I did eventually upgrade my controller and to mach 4 and I didn’t really see any advantage to doing the upgrade in regards to my hobby use other than I got to really find out a lot about how my cnc is put together and how all the software works. I wrote up a review on my upgrade last winter in a different post but in short if you are pleased with your machine as configured and mach 3 in general I wouldn’t suggest doing such an upgrade.

    ---

Если вы ищете как runtime error исправить — вы попали по адресу.

Причин появления таковой может быть огромное множество.

Чаще всего причина состоит в том, что выходит новая версия того или иного приложения/игры и она устанавливается прямо поверх старой.

Хотя это далеко не единственная ситуация, которая может вызвать ее появление.

После того, как вы нажимаете на единственную кнопку в окне ошибки, оно просто закрывается и программа также перестает работать.

Бывает, что она все же продолжает работать, но в ней невозможно ничего сохранить. В любом случае, есть несколько способов исправить ее.

Как выглядит ошибка

Способ №1. CCleaner

Самое простое решение заключается в том, чтобы воспользоваться программой для чистки реестра. Как это работает?

Все просто – чистильщик реестра, собственно, и предназначен для того, чтобы исправлять всевозможные проблемы, вроде той, которую рассматриваем мы, систематизировать файлы и добавлять то, чего недостает ему для нормальной работы.

Лучшей по праву считается CCleaner, хотя вы можете воспользоваться и другой.

Чтобы использовать ее, сделайте вот что:

1. Скачайте (вот ссылка на бесплатную) и установите программу.
2. Запустите. Перейдите на вкладку «Реестр» на панели слева.
3. В разделе «Целостность» поставьте галочки на всех возможных пунктах – никто не знает, в чем именно проблема.
4. Нажмите кнопку «Поиск проблем». Когда этот процесс закончится, нажмите кнопку «Исправить…».

Использование

1. Подождите, пока приложение исправит все проблемы. Перезагрузите компьютер.

После этого runtime error должен перестать появляться. Если нет, переходим к следующему решению.

Способ №2. DirectX

Вполне вероятно, что ее появление вызывают какие-то проблемы с DirectX. Возможно, какие-то файлы исполняемых библиотек были повреждены или же существующие библиотеки банально устарели.

В любом случае, лучше всего просто установить наиболее актуальные варианты и, опять же, перезагрузить компьютер.

Для этого зайдите на сайт Microsoft, на страницу с возможностью скачать DirectX. Запустите скачанный файл и выполните все действия, подразумевающие установку исполняемых библиотек.

Здесь нет никаких особых рекомендаций – обычная.

Страница загрузки DirectX

Если после установки и перезагрузки компьютера ошибка не исчезла, идем дальше.

Способ №3. Visual C++

О распространяемом пакете Visual C++ в контексте рассматриваемой проблемы можно скачать то же самое, что и о библиотеках DirectX.

Возможно, какие-то файлы были повреждены или версия устарела.

Бывают в данном случае и другие ситуации, когда установленная C++ попросту не подходит для вашей операционной системы.

Ниже приведена таблица с вариантами, которые подходят для разных версий ОС.

Так вот, в зависимости от того, какая у вас ОС, вам следует скачать и инсталировать на свой компьютер C++2008 (64-бит, 32-бит), C++2010 (64-бит, 32-бит) или же C++2015 обновление 3.

Это наиболее актуальная версия по состоянию на июнь 2017 года. В будущем выйдут новые, поэтому следите за новостями на официальном сайте Microsoft.

Скачивание происходит одинаково – выбираем язык распространяемого компонента и жмем кнопку «Скачать». После этого останется запустить загруженный файл.

После этого перезагрузите компьютер.

Страница загрузки Visual C++

Способ №4. Microsoft .NET Framework

Здесь все то же самое – Microsoft .NET Framework тоже может вызывать рассматриваемую проблему из-за отсутствия каких-то собственных файлов. И этот компонент также нужно скачать и установить.

Но есть определенный, правильный порядок ее инсталяции:

Сначала необходимо инсталируйте версию 2.0 (вот ссылка). Попробуйте запустить программу, в которой раньше возникала проблема, если она не исчезла, устанавливайте дальше.

После этого 3.0 (скачать).

Если не помогает, 4.0 (ссылка).

Наконец, если у вас Windows Vista SP2, 7 SP1, 8, 8.1, Server 2008 SP2, Server 2008 R2 SP1, Server 2012 или Server 2012 R2, установите 4.6.2 (скачать).

Скачивание происходит точно так же, как и в случае с пакетами Visual C++.

Если ничего из этого не помогает, значит, случился сбой самой операционной системы. Пригласите на дом специалиста или сдайте компьютер в сервисный центр, если это возможно.

В крайнем случае, сделайте откат системы или вовсе переустановите ее.

Источник