Internal sdk error cdburnerxp

If you don’t find the answer to your problem here, visit our forum and post your problem/question there.

General errors

Burning errors

CDBurnerXP ver. 4.5.8

. burn CDs and DVDs for free!

Intro

Audio

Miscellaneous

References

Appendices

Management

Troubleshooting and errors

If you don’t find the answer to your problem here, visit our forum and post your problem/question there.

General errors

No CD/DVD drive was detected on this system Make sure that you either have administrative rights, or you chose to “provide CD/DVD access to any user” when installing CDBurnerXP. If the option in setup did not help, you can also try using NeroBurnRights.

Access to the drives might be blocked in remote terminal sessions. To prevent this, go to the Start → Run (or Win+R) and enter “gpedit.msc”. Click OK. In the left pane of Group Policy Editor, navigate to Computer Configuration → Administrative Templates → System → Removable Storage Access. In the right pane of Group Policy Editor, change the value of the setting “All Removable Storage: Allow direct access in remote sessions” to “Enabled”.

Otherwise make sure you are using version 4.5 of CDBurnerXP, this version should fix all issues with device detection.

If you are using an USB drive, make sure that the USB cable is properly plugged in. CDBurnerXP usually works well with USB drives, so this is a likely cause if your drive is not detected.

Make sure that the drive letter of the drive is between D and Z. If necessary, change it.

Another option is to update the firmware of your drive.

If the drives are also not recognized by your operating system, check http://support.microsoft.com/kb/314060

The application hangs at startup Try removing all unnecessary USB devices like USB sticks and check if that makes a difference. If no disc is inserted in the drive, try inserting a writable disc. If you have any virtual CD/DVD drives installed, try to disable them temporarily. Some applications/devices may interfere with drive access. Currently known is VirtualDrive Pro and MagicJack. To make CDBurnerXP work, please either uninstall/unplug the conflicting application/device or try using the SPTD mode of CDBurnerXP. Make sure that the SATA port your device is connected to supports ATAPI devices (check your mainboard’s manual) and choose a different port/controller if necessary. Update your SATA / mainboard drivers if possible. Knowledgebase Articles KB1: Burning audio discs doesn’t work KB2: Error after choosing a compilation type in CDBurnerXP KB11: Error reports with no fix possible KB12: You did not select a burning device KB16: Adding files with portable version does not work Application has generated an exception that could not be handled You can read information on that error in the FAQ The audio file has an invalid format Try updating the Windows Media Player to the latest version. If that does not help, check http://forum.cdburnerxp.se/viewtopic.php?f=4&t=6722 Root element is missing (error at startup) Try to delete the file specified in the error message. CDBurnerXP keeps accessing the floppy drive periodically Avira Antivir could be a cause of that problem. There is a discussion in their support forums. Setup does not detect the .NET Framework installation correctly In this case you can manually add a registry-key, so that the setup knows (or at least thinks) that .NET is installed. The key you have to add is

If you don’t know how to edit the registry, you can also download and start this reg-file.

CDBurnerXP does not detect the correct disc size If this is the case, you can set the disc size manually by rightclick on the sizemeter (bottom).
CDBurnerXP incorrectly says that the loaded disc is not empty See http://www.cdburnerxp.se/forum/viewtopic.php?p=9892#9892 or http://www.cdburnerxp.se/forum/viewtopic.php?t=3643

Источник

CDBurnerXP ver. 4.5.8

. burn CDs and DVDs for free!

Intro

Audio

Miscellaneous

References

Appendices

Management

This is an old revision of the document!

Troubleshooting and errors

If you don’t find the answer to your problem here, visit our forum and post your problem/question there.

General errors

No CD/DVD drive was detected on this system Make sure that you either have administrative rights, or you chose to “provide CD/DVD access to any user” when installing CDBurnerXP. If the option in setup did not help, you can also try using NeroBurnRights.

Most of the time, if a drive is not detected properly, depending on your chipset, it helps to install the Intel Matrix Storage Manager / Intel Rapid Storage or the RAID drivers for AMD chipsets.

If you are using an USB drive, make sure that the USB cable is properly plugged in. CDBurnerXP usually works well with USB drives, so this is a likely cause if your drive is not detected.

Make sure that the drive letter of the drive is between D and Z. If necessary, change it.

Another option is to update the firmware of your drive.

If all else fails, you might want to check KB:929461 or try to disable the AHCI mode. Also, go to the forums and have a look if anyone else had your problem before and if they found a solution. The application hangs at startup Try removing all unnecessary USB devices like USB sticks and check if that makes a difference. If no disc is inserted in the drive, try inserting a writable disc. Some applications/devices may interfere with drive access. Currently known is VirtualDrive Pro and MagicJack. To make CDBurnerXP work, please either uninstall/unplug the conflicting application/device or try using the SPTD mode of CDBurnerXP. Knowledgebase Articles KB1: Burning audio discs doesn’t work KB2: Error after choosing a compilation type in CDBurnerXP KB11: Error reports with no fix possible KB12: You did not select a burning device KB16: Adding files with portable version does not work Application has generated an exception that could not be handled You can read information on that error in the FAQ The audio file has an invalid format Try updating the Windows Media Player to the latest version. If that does not help, check http://forum.cdburnerxp.se/viewtopic.php?f=4&t=6722 Root element is missing (error at startup) Try to delete the file specified in the error message. CDBurnerXP keeps accessing the floppy drive periodically Avira Antivir could be a cause of that problem. There is a discussion in their support forums. Setup does not detect the .NET Framework installation correctly In this case you can manually add a registry-key, so that the setup knows (or at least thinks) that .NET is installed. The key you have to add is

If you don’t know how to edit the registry, you can also download and start this reg-file.

CDBurnerXP does not detect the correct disc size If this is the case, you can set the disc size manually by rightclick on the sizemeter (bottom).
CDBurnerXP incorrectly says that the loaded disc is not empty See http://www.cdburnerxp.se/forum/viewtopic.php?p=9892#9892 or http://www.cdburnerxp.se/forum/viewtopic.php?t=3643

Источник

CDBurnerXP ver. 4.5.8

. burn CDs and DVDs for free!

Intro

Audio

Miscellaneous

References

Appendices

Management

Troubleshooting and errors

If you don’t find the answer to your problem here, visit our forum and post your problem/question there.

General errors

No CD/DVD drive was detected on this system Make sure that you either have administrative rights, or you chose to “provide CD/DVD access to any user” when installing CDBurnerXP. If the option in setup did not help, you can also try using NeroBurnRights.

Access to the drives might be blocked in remote terminal sessions. To prevent this, go to the Start → Run (or Win+R) and enter “gpedit.msc”. Click OK. In the left pane of Group Policy Editor, navigate to Computer Configuration → Administrative Templates → System → Removable Storage Access. In the right pane of Group Policy Editor, change the value of the setting “All Removable Storage: Allow direct access in remote sessions” to “Enabled”.

Otherwise make sure you are using version 4.5 of CDBurnerXP, this version should fix all issues with device detection.

If you are using an USB drive, make sure that the USB cable is properly plugged in. CDBurnerXP usually works well with USB drives, so this is a likely cause if your drive is not detected.

Make sure that the drive letter of the drive is between D and Z. If necessary, change it.

Another option is to update the firmware of your drive.

If the drives are also not recognized by your operating system, check http://support.microsoft.com/kb/314060

The application hangs at startup Try removing all unnecessary USB devices like USB sticks and check if that makes a difference. If no disc is inserted in the drive, try inserting a writable disc. If you have any virtual CD/DVD drives installed, try to disable them temporarily. Some applications/devices may interfere with drive access. Currently known is VirtualDrive Pro and MagicJack. To make CDBurnerXP work, please either uninstall/unplug the conflicting application/device or try using the SPTD mode of CDBurnerXP. Make sure that the SATA port your device is connected to supports ATAPI devices (check your mainboard’s manual) and choose a different port/controller if necessary. Update your SATA / mainboard drivers if possible. Knowledgebase Articles KB1: Burning audio discs doesn’t work KB2: Error after choosing a compilation type in CDBurnerXP KB11: Error reports with no fix possible KB12: You did not select a burning device KB16: Adding files with portable version does not work Application has generated an exception that could not be handled You can read information on that error in the FAQ The audio file has an invalid format Try updating the Windows Media Player to the latest version. If that does not help, check http://forum.cdburnerxp.se/viewtopic.php?f=4&t=6722 Root element is missing (error at startup) Try to delete the file specified in the error message. CDBurnerXP keeps accessing the floppy drive periodically Avira Antivir could be a cause of that problem. There is a discussion in their support forums. Setup does not detect the .NET Framework installation correctly In this case you can manually add a registry-key, so that the setup knows (or at least thinks) that .NET is installed. The key you have to add is

If you don’t know how to edit the registry, you can also download and start this reg-file.

CDBurnerXP does not detect the correct disc size If this is the case, you can set the disc size manually by rightclick on the sizemeter (bottom).
CDBurnerXP incorrectly says that the loaded disc is not empty See http://www.cdburnerxp.se/forum/viewtopic.php?p=9892#9892 or http://www.cdburnerxp.se/forum/viewtopic.php?t=3643

Источник

CDBurnerXP ver. 4.5.8

. burn CDs and DVDs for free!

Intro

Audio

Miscellaneous

References

Appendices

Management

This is an old revision of the document!

Troubleshooting and errors

If you don’t find the answer to your problem here, visit our forum and post your problem/question there.

General errors

No CD/DVD drive was detected on this system Make sure that you either have administrative rights, or you chose to “provide CD/DVD access to any user” when installing CDBurnerXP. If the option in setup did not help, you can also try using NeroBurnRights.

Most of the time, if a drive is not detected properly, depending on your chipset, it helps to install the Intel Matrix Storage Manager / Intel Rapid Storage or the RAID drivers for AMD chipsets.

If you are using an USB drive, make sure that the USB cable is properly plugged in. CDBurnerXP usually works well with USB drives, so this is a likely cause if your drive is not detected.

Make sure that the drive letter of the drive is between D and Z. If necessary, change it.

Another option is to update the firmware of your drive.

If all else fails, you might want to check KB:929461 or try to disable the AHCI mode. Also, go to the forums and have a look if anyone else had your problem before and if they found a solution. The application hangs at startup Try removing all unnecessary USB devices like USB sticks and check if that makes a difference. If no disc is inserted in the drive, try inserting a writable disc. Some applications/devices may interfere with drive access. Currently known is VirtualDrive Pro and MagicJack. To make CDBurnerXP work, please either uninstall/unplug the conflicting application/device or try using the SPTD mode of CDBurnerXP. Knowledgebase Articles KB1: Burning audio discs doesn’t work KB2: Error after choosing a compilation type in CDBurnerXP KB11: Error reports with no fix possible KB12: You did not select a burning device KB16: Adding files with portable version does not work Application has generated an exception that could not be handled You can read information on that error in the FAQ The audio file has an invalid format Try updating the Windows Media Player to the latest version. If that does not help, check http://forum.cdburnerxp.se/viewtopic.php?f=4&t=6722 Root element is missing (error at startup) Try to delete the file specified in the error message. CDBurnerXP keeps accessing the floppy drive periodically Avira Antivir could be a cause of that problem. There is a discussion in their support forums. Setup does not detect the .NET Framework installation correctly In this case you can manually add a registry-key, so that the setup knows (or at least thinks) that .NET is installed. The key you have to add is

If you don’t know how to edit the registry, you can also download and start this reg-file.

CDBurnerXP does not detect the correct disc size If this is the case, you can set the disc size manually by rightclick on the sizemeter (bottom).
CDBurnerXP incorrectly says that the loaded disc is not empty See http://www.cdburnerxp.se/forum/viewtopic.php?p=9892#9892 or http://www.cdburnerxp.se/forum/viewtopic.php?t=3643

Источник

CDBurnerXP ver. 4.5.8

. burn CDs and DVDs for free!

Intro

Audio

Miscellaneous

References

Appendices

Management

Troubleshooting and errors

If you don’t find the answer to your problem here, visit our forum and post your problem/question there.

General errors

No CD/DVD drive was detected on this system Make sure that you either have administrative rights, or you chose to “provide CD/DVD access to any user” when installing CDBurnerXP. If the option in setup did not help, you can also try using NeroBurnRights.

Access to the drives might be blocked in remote terminal sessions. To prevent this, go to the Start → Run (or Win+R) and enter “gpedit.msc”. Click OK. In the left pane of Group Policy Editor, navigate to Computer Configuration → Administrative Templates → System → Removable Storage Access. In the right pane of Group Policy Editor, change the value of the setting “All Removable Storage: Allow direct access in remote sessions” to “Enabled”.

Otherwise make sure you are using version 4.5 of CDBurnerXP, this version should fix all issues with device detection.

If you are using an USB drive, make sure that the USB cable is properly plugged in. CDBurnerXP usually works well with USB drives, so this is a likely cause if your drive is not detected.

Make sure that the drive letter of the drive is between D and Z. If necessary, change it.

Another option is to update the firmware of your drive.

If the drives are also not recognized by your operating system, check http://support.microsoft.com/kb/314060

The application hangs at startup Try removing all unnecessary USB devices like USB sticks and check if that makes a difference. If no disc is inserted in the drive, try inserting a writable disc. If you have any virtual CD/DVD drives installed, try to disable them temporarily. Some applications/devices may interfere with drive access. Currently known is VirtualDrive Pro and MagicJack. To make CDBurnerXP work, please either uninstall/unplug the conflicting application/device or try using the SPTD mode of CDBurnerXP. Make sure that the SATA port your device is connected to supports ATAPI devices (check your mainboard’s manual) and choose a different port/controller if necessary. Update your SATA / mainboard drivers if possible. Knowledgebase Articles KB1: Burning audio discs doesn’t work KB2: Error after choosing a compilation type in CDBurnerXP KB11: Error reports with no fix possible KB12: You did not select a burning device KB16: Adding files with portable version does not work Application has generated an exception that could not be handled You can read information on that error in the FAQ The audio file has an invalid format Try updating the Windows Media Player to the latest version. If that does not help, check http://forum.cdburnerxp.se/viewtopic.php?f=4&t=6722 Root element is missing (error at startup) Try to delete the file specified in the error message. CDBurnerXP keeps accessing the floppy drive periodically Avira Antivir could be a cause of that problem. There is a discussion in their support forums. Setup does not detect the .NET Framework installation correctly In this case you can manually add a registry-key, so that the setup knows (or at least thinks) that .NET is installed. The key you have to add is

If you don’t know how to edit the registry, you can also download and start this reg-file.

CDBurnerXP does not detect the correct disc size If this is the case, you can set the disc size manually by rightclick on the sizemeter (bottom).
CDBurnerXP incorrectly says that the loaded disc is not empty See http://www.cdburnerxp.se/forum/viewtopic.php?p=9892#9892 or http://www.cdburnerxp.se/forum/viewtopic.php?t=3643

Источник

View unanswered posts | View active topics

Author	Message
	Post subject: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sat Nov 13, 2010 10:23 am
Joined: Sun Jun 14, 2009 6:00 pm Posts: 542	Hi, a user reported the following error to me when trying to burn an audio CD: CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed Any idea why this happens or how to fix? Log is too big for attaching, so here is a link: http://forum.cdburnerxp.se/download/file.php?id=706 Regards, Florian
Top

anton (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sat Nov 13, 2010 7:52 pm
Site Admin Joined: Fri Jun 18, 2004 12:03 am Posts: 4089 Location: British Virgin Islands	1) There’s nothing to fix as nothing is broken. Not all commands send to device should terminate with «success» status. You don’t need to look at the log you need to check for codes returned by API calls. So what really went wrong you started focusing on this issue? What user did complain at? 2) User’s using version with all traces enabled. This is what should be FIXED immediately. It’s not production version, it’s for experiments only. It’s DOG SLOW and creates oversized (read — unreadable) logs. 3) Switch to SPTD rather then SPTI (not related to this issue, but in general). SPTI and ASPI are obsolete and kept in SDK for backward compatibility only. You’re using non-production mode for production software exploiting all possible software conflict issues making our, your and your users life very… Entertaining More then half of the bug reports end with software conflict localized issue.
Top

anton (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sat Nov 13, 2010 8:03 pm
Site Admin Joined: Fri Jun 18, 2004 12:03 am Posts: 4089 Location: British Virgin Islands	OK, I’ve managed to squeeze what’s wrong: error 09/00 — track following error. Should never happen in a normal situation. I think it’s «quatum effect» and burning failed b/c application was too slow to react. And it was too slow b/c it used version with all traces enabled. Please try normal retail one to isolate this possibility. Thanks!
Top

flöle	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sat Nov 13, 2010 8:27 pm
Joined: Sun Jun 14, 2009 6:00 pm Posts: 542	1) I don’t use API calls, I use StarBurnX. If StarBurnX decides to raise an exception unnecessarily, then it’s something to fix. 2) OK, where do I get the latest beta version of StarBurnX without the traces? 3) SPTD requires further drivers to be installed, and I don’t like that. Last time I tried, the silent SPTD setup didn’t even work properly. Anyway, SPTI works so I won’t go through the trouble of supporting yet another component.
Top

anton (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sat Nov 13, 2010 10:16 pm
Site Admin Joined: Fri Jun 18, 2004 12:03 am Posts: 4089 Location: British Virgin Islands	1) For now everything works as expected. WRITE10 fails and SDK report this to the uppest level. 2) Guys will prepare a build for you on Monday. But please don’t use full trace build anywhere. It should not really burn anything… 3) It’s like buying a Porsche with carbon-ceramic brakes and using parking brake only to stop it. B/c using ordinary brakes is too annoying. No problem! It’s your car.
Top

flöle	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sun Nov 14, 2010 8:06 am
Joined: Sun Jun 14, 2009 6:00 pm Posts: 542	I’d use the better brakes if they were built in. I’m not good at car tuning if you will.
Top

anton (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sun Nov 14, 2010 5:52 pm
Site Admin Joined: Fri Jun 18, 2004 12:03 am Posts: 4089 Location: British Virgin Islands	StarBurn is not part of the operating system either. So you end with shipping third-party component with your app. Why not use IMAPI? I know the reason. It (IMAPI) does not work as expected. The same with SPTI… It does not work as expected. That’s why many-many guys end with writing own kernel filter driver to handle uncollisioned raw disk I/O. Daemon Tools, Alcohol Software, CloneCD, Roxio, Sonic etc. This creates a MESS. So smart guys end with special unfilterable code. And even smarter guys end with gathering their resources and maintaining shared driver. This is true for SPTD. At least three companies (Daemon Tools, Alcohol Software & StarBurn Software) use SPTD. So there are more chances to see SPTD already installed on user’s machine then you think. FYI.
Top

flöle	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Fri Nov 19, 2010 7:19 pm
Joined: Sun Jun 14, 2009 6:00 pm Posts: 542	anton (staff) wrote: 2) Guys will prepare a build for you on Monday. But please don’t use full trace build anywhere. It should not really burn anything…. Just wanted to remind you
Top

anton (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sat Nov 20, 2010 6:02 am
Site Admin Joined: Fri Jun 18, 2004 12:03 am Posts: 4089 Location: British Virgin Islands	Sorry, not done yet… I’ll kick Dima Monday morning if you don’t mind.
Top

dima (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Mon Nov 22, 2010 11:56 am
Joined: Thu Dec 13, 2007 8:44 am Posts: 609	Hello, Here is a new (release) build of StarBurnX : link was removed Regards, Dmitry
Top

flöle	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Mon Nov 22, 2010 2:16 pm
Joined: Sun Jun 14, 2009 6:00 pm Posts: 542
Top

anton (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Mon Nov 22, 2010 4:21 pm
Site Admin Joined: Fri Jun 18, 2004 12:03 am Posts: 4089 Location: British Virgin Islands	Please keep us updated about your progress Thanks!
Top

flöle	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sat Jan 29, 2011 7:44 pm
Joined: Sun Jun 14, 2009 6:00 pm Posts: 542	Hi again, I noticed that with the new edition of StarBurnX the logging functionality seems to be entirely gone. This is a bit of a problem when trying to diagnose problems. If that was intentional, could you please provide me with two versions of StarBurnX, one with logging possible and one without so that I can have a diagnostic build of my app available?
Top

anton (staff)	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sun Jan 30, 2011 8:01 am
Site Admin Joined: Fri Jun 18, 2004 12:03 am Posts: 4089 Location: British Virgin Islands	This is issue with the build, we’ll revert to this functionality back of course. Sorry for inconvenience… flöle wrote: Hi again, I noticed that with the new edition of StarBurnX the logging functionality seems to be entirely gone. This is a bit of a problem when trying to diagnose problems. If that was intentional, could you please provide me with two versions of StarBurnX, one with logging possible and one without so that I can have a diagnostic build of my app available?
Top

flöle	Post subject: Re: Internal SDK error: CStarBurn_ScsiTransportSPTI Posted: Sun Jan 30, 2011 8:15 am
Joined: Sun Jun 14, 2009 6:00 pm Posts: 542	Can you please let me know when a new build is available? Thanks.
Top