Keenetic tntfs error - Исправление ошибок и поиск оптимальных решений проблем

Пользуюсь Wi-Fi роутером Keenetic Viva (KN-1910). Прошивка 3.9.2. На роутере установлены штатные DLNA-сервер, SMB-сервер и торрент-клиент Transmission. К роутеру по USB подключён переносной жеский диск на 5TB, разбитый на 2 раздела. Первый раздел — NTFS, почти на весь размер диска. Второй раздел — Linux SWAP размером 256MB, который роутер автоматически монтирует.

Из описания конфигурации уже понятно, что через Transmission скачивался качественный видео-контент, который впоследствии транслировался на телевизор по DLNA.

Обнаружил вот что: если через Transmission запустить скачивание в несколько потоков (настройки по-умолчанию, ага) файлов размером 180 GB или больше, то скорость скачивания очень сильно падает. Грубо говоря, стает не больше 500KB/s, а часто и меньше, а в журналах роутера начинают пачками сыпаться ошибки типа:

kernel: tntfs error (device sda1, pid 5): ntfs_write_inode(): Failed (error 5). Run ntfsck.
kernel: tntfs error (device sda1, pid 5): ntfs_attr_update_mapping_pairs(): Failed to determine the size for the mapping pairs (error 22).

При этом, при скачивании файлов меньше размера, к примеру не более 100GB каждый, таких ошибок не возникает и скачивание идёт на вполне приличной скорости.

Насколько я понимаю, начинаются проблемы на стыке алгоритма работы торрент-клиента и ntfs-драйвера. По всей видимости, начинается бесконечный процесс порчи скачиваемых файлов с одновременными попытками перекачать запоротые блоки, что приводит к очень заметному проседанию по скорости и куче ошибок в логах.

Поиск в Интернете и различные форумы, в том числе этот, подсказывали что данную проблему предлагается решать путём перехода с файловой системы NTFS на ext4, однако этот вариант для меня не подходил, т.к. с файловой системой ext4 нативно не работают ни компьютеры под Windows, ни телевизор.

Однако, путём проб и ошибок я обнаружил что если поменять в настройках торрент-клиента Transmission настройку «Максимальное количество одновременных загрузок» на 1 (т.е. не разрешать торренту одновременно скачивать больше одной раздачи), то даже при скачивании файлов больше 180GB на файловую систему NTFS скорость скачивания стаёт нормальной, а в журналах системы перестают сыпаться ошибки kernel: tntfs error.

На этом варианте и остановился. Надеюсь мой опыт будет ещё кому-то полезен, а разработчики прошивок обратят внимание на описанную ситуацию и поймут что можно исправить.

Edited January 26 by Burkeen

Источник

Asmodeus: Сообщения: 6; Зарегистрирован: 18 май 2016, 11:50

Приветствую, дорогие!
имею проблему с подключенным внешним жестким диском.
в логе вот.

Код: Выделить всё

kernel: usb 1-1: new high speed USB device using rt3xxx-ehci and address 2
May 18 11:05:58ndmkernel: usb 1-1: configuration #1 chosen from 1 choice
May 18 11:05:58ndmkernel: scsi0 : SCSI emulation for USB Mass Storage devices
May 18 11:05:58ndmkernel: usb-storage: device found at 2
May 18 11:05:58ndmkernel: usb-storage: waiting for device to settle before scanning
May 18 11:06:03ndmkernel: scsi 0:0:0:0: Direct-Access Seagate Expansion Desk 0711 PQ: 0 ANSI: 6
May 18 11:06:03wmondWifiMaster1/AccessPoint0: (RT2860) STA(ac:cf:5c:c0:68:80) had associated successfully.
May 18 11:06:04wmondWifiMaster1/AccessPoint0: (RT2860) STA(ac:cf:5c:c0:68:80) set key done in WPA2/WPA2PSK.
May 18 11:06:05ndhcps_WEBADMIN: DHCPREQUEST received for 192.168.1.40 from ac:cf:5c:c0:68:80.
May 18 11:06:08ndhcps_WEBADMIN: DHCPREQUEST received for 192.168.1.40 from ac:cf:5c:c0:68:80.
May 18 11:06:08ndhcps_WEBADMIN: sending ACK of 192.168.1.40 to ac:cf:5c:c0:68:80.
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Spinning up disk.........ready
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] 976754645 4096-byte hardware sectors (4000787 MB)
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Write Protect is off
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] 976754645 4096-byte hardware sectors (4000787 MB)
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Write Protect is off
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
May 18 11:06:09ndmkernel: /dev/scsi/host0/bus0/target0/lun0: p1
May 18 11:06:09ndmkernel: sd 0:0:0:0: [sda] Attached SCSI disk
May 18 11:06:09ndmkernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
May 18 11:06:09ndmkernel: usb-storage: device scan complete
May 18 11:06:09ndmFileSystem::Ext: "/dev/sda" has an unknown partition type, ignored.
May 18 11:06:09ndmFileSystem::Ext: failed to create a new filesystem.
May 18 11:06:09ndmFileSystem::Ext: ntfs "9AF2BF43F2BF2285:" filesystem initialized.
May 18 11:06:09ndmkernel: tntfs: fail_safe is enabled
May 18 11:06:09ndmkernel: tntfs info: NTFS volume version 3.1 (cluster_size 4096, PAGE_CACHE_SIZE 4096).
May 18 11:06:13ndhcps_WEBADMIN: DHCPDISCOVER received from ac:cf:5c:c0:68:80.
May 18 11:06:13ndhcps_WEBADMIN: sending OFFER of 192.168.1.40 to ac:cf:5c:c0:68:80.
May 18 11:06:14ndhcps_WEBADMIN: DHCPREQUEST received for 192.168.1.40 from ac:cf:5c:c0:68:80.
May 18 11:06:14ndhcps_WEBADMIN: sending ACK of 192.168.1.40 to ac:cf:5c:c0:68:80.
May 18 11:06:15ndmCore::Server: started a new session.
May 18 11:06:16ndmkernel: attempt to access beyond end of device
May 18 11:06:16ndmkernel: sda1: rw=0, want=6508633888, limit=3519053456
May 18 11:06:16ndmkernel: tntfs error (device sda1, pid 372): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x307e3be3.
May 18 11:06:16ndmkernel: attempt to access beyond end of device
May 18 11:06:16ndmkernel: sda1: rw=0, want=6508633888, limit=3519053456
May 18 11:06:16ndmkernel: tntfs error (device sda1, pid 372): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x307e3be3.
May 18 11:06:16ndmkernel: tntfs error (device sda1, pid 372): ntfs_index_descend_into_child_node(): Failed to map index page (error 5).
May 18 11:06:16ndmkernel: tntfs error (device sda1, pid 372): ntfs_index_lookup_by_position(): Failed (error 5).
May 18 11:06:16ndmkernel: tntfs error (device sda1, pid 372): ntfs_readdir(): Failed to look up index entry with position 0x0 in directory 0x7a46 (error 5).

и соотвесттвенно большую часть файлов не читает, торренты не качает…
началось после обновления на 2.06 и установки юсб-флеш с entware. Все уже сбросил до заводских,откатил до 2.04, а все то же продолжается… ckdsk запускал — диск без ошибок, пробовал поправить и gparted’ом, все показывает что диск чистый….

помогите советом

Александр Рыжов: Сообщения: 442; Зарегистрирован: 12 авг 2015, 14:14; Откуда: Смоленск; Контактная информация:

Сообщение Александр Рыжов » 18 май 2016, 12:15

Asmodeus, подключите диск к Windows PC и лечите файловую систему, на ней куча ошибок.

Asmodeus: Сообщения: 6; Зарегистрирован: 18 май 2016, 11:50

Сообщение Asmodeus » 18 май 2016, 14:33

я же говорю — подключал к компьютеру, правда не напрямую через sata, а также как и к роутеру через юсб. На компе в вин10, все открывается все читается, файловую систему проверял несколько раз — все чисто ошибок не выдает, скорость в норме. запись/чтение работают. а в роутере такая борода.

Александр Рыжов: Сообщения: 442; Зарегистрирован: 12 авг 2015, 14:14; Откуда: Смоленск; Контактная информация:

Сообщение Александр Рыжов » 18 май 2016, 15:37

Значит, придётся переформатировать диск, потому что по какой-то причине на роутере он не считается здоровым.
Никаких настроек в прошивке в этом случае нет, поэтому вариантов не много.

Asmodeus: Сообщения: 6; Зарегистрирован: 18 май 2016, 11:50

Сообщение Asmodeus » 18 май 2016, 15:42

спасибо, попробую! не хотелось правда искать 3,5 тб свободного места!)) А посоветуете форматировать сразу в экст4 или оставить нтфс?

Zyxmon: Администратор; Сообщения: 1904; Зарегистрирован: 09 авг 2015, 15:33

Сообщение Zyxmon » 18 май 2016, 15:44

Asmodeus писал(а):Источник цитаты форматировать сразу в экст4

А с какого перепугу ext4 в прошивке поддерживается?

Александр Рыжов: Сообщения: 442; Зарегистрирован: 12 авг 2015, 14:14; Откуда: Смоленск; Контактная информация:

Сообщение Александр Рыжов » 18 май 2016, 16:27

Asmodeus, пожалуйста учтите, что дело может быть не в файловой системе, а в капризном USB-SATA мосте. После форматирования не спешите заливать файлы назад, погоняйте диск с роутером некоторое время.

Asmodeus: Сообщения: 6; Зарегистрирован: 18 май 2016, 11:50

Сообщение Asmodeus » 18 май 2016, 16:29

Александр Рыжов писал(а):Источник цитаты Asmodeus, пожалуйста учтите, что дело может быть не в файловой системе, а в капризном USB-SATA мосте. После форматирования не спешите заливать файлы назад, погоняйте диск с роутером некоторое время.

он у меня гоняется уже тритий год! без нареканий в принципе! не посоветуете какой юсб-сата, который стабильно с кинетиками работает?

Asmodeus: Сообщения: 6; Зарегистрирован: 18 май 2016, 11:50

Сообщение Asmodeus » 19 май 2016, 22:57

Отформатировал в ext3, к сожалению все то же самое….

Код: Выделить всё

ernel: usb 1-1: new high speed USB device using rt3xxx-ehci and address 3
May 19 21:53:10ndm
kernel: usb 1-1: configuration #1 chosen from 1 choice
May 19 21:53:10ndm
kernel: scsi1 : SCSI emulation for USB Mass Storage devices
May 19 21:53:10ndm
kernel: usb-storage: device found at 3
May 19 21:53:10ndm
kernel: usb-storage: waiting for device to settle before scanning
May 19 21:53:15ndm
kernel: scsi 1:0:0:0: Direct-Access Seagate Expansion Desk 0711 PQ: 0 ANSI: 6
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Spinning up disk..........ready
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] 976754645 4096-byte hardware sectors (4000787 MB)
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Write Protect is off
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Mode Sense: 4f 00 00 00
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] 976754645 4096-byte hardware sectors (4000787 MB)
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Write Protect is off
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Mode Sense: 4f 00 00 00
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
May 19 21:53:23ndm
kernel: /dev/scsi/host1/bus0/target0/lun0: p1
May 19 21:53:23ndm
kernel: sd 1:0:0:0: [sda] Attached SCSI disk
May 19 21:53:23ndm
kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
May 19 21:53:23ndm
kernel: usb-storage: device scan complete
May 19 21:53:23ndm
FileSystem::Ext: "/dev/sda" has an unknown partition type, ignored.
May 19 21:53:23ndm
FileSystem::Ext: failed to create a new filesystem.
May 19 21:53:23ndm
FileSystem::Ext: ext3 "1e530831-e0bd-45ce-b754-9662715f7789:" filesystem initialized.
May 19 21:53:23ndm
kernel: kjournald starting. Commit interval 5 seconds
May 19 21:53:23ndm
kernel: EXT3 FS on sda1, internal journal
May 19 21:53:23ndm
kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 19 21:53:59ndm
Torrent::Client: server disabled.
May 19 21:53:59ndm
Core::ConfigurationSaver: saving configuration...
May 19 21:54:02ndm
Core::ConfigurationSaver: configuration saved.
May 19 21:54:07ndm
kernel: attempt to access beyond end of device
May 19 21:54:07ndm
kernel: sda1: rw=32, want=7704674328, limit=3519066112
May 19 21:54:07ndm
kernel: EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=240771073, block=963084290
May 19 21:55:17ndm
kernel: attempt to access beyond end of device
May 19 21:55:17ndm
kernel: sda1: rw=32, want=7326662680, limit=3519066112
May 19 21:55:17ndm
kernel: EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=228958209, block=915832834
May 19 21:55:17ndm
kernel: attempt to access beyond end of device
May 19 21:55:17ndm
kernel: sda1: rw=32, want=3734503448, limit=3519066112
May 19 21:55:17ndm
kernel: EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=116703233, block=466812930
May 19 21:55:17ndm
kernel: attempt to access beyond end of device
May 19 21:55:17ndm
kernel: sda1: rw=32, want=4823187480, limit=3519066112
May 19 21:55:17ndm
kernel: EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=150724609, block=602898434
May 19 21:55:17ndm
kernel: attempt to access beyond end of device
May 19 21:55:17ndm
kernel: sda1: rw=32, want=4785438744, limit=3519066112
May 19 21:55:17ndm
kernel: EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=149544961, block=598179842
May 19 21:55:24ndm
kernel: attempt to access beyond end of device
May 19 21:55:24ndm
kernel: sda1: rw=0, want=6160384016, limit=3519066112
May 19 21:55:24ndm
kernel: EXT3-fs error (device sda1): read_inode_bitmap: Cannot read inode bitmap - block_group = 23500, inode_bitmap = 770048001
May 19 21:55:24ndm
kernel: EXT3-fs error (device sda1) in ext3_new_inode: IO failure

Менять жесткий только?

Кто сейчас на конференции

Всего 1 посетитель :: 0 зарегистрированных, 0 скрытых и 1 гость (основано на активности пользователей за последние 5 минут)
Больше всего посетителей (162) здесь было 16 ноя 2019, 18:33

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 1 гость

Источник

Вся активность

Массовая проблема с роутерами Keenetic

Тут массовая проблема с актуальными роутерами Keenetic нарисовалась (прошивка 3.5.6)

Из-за проблем с сертификатом пропадает веб-доступ до роутера, а сам роутер начинает через некоторое время глючить, CPU под 100%

Нужно заходить telnet’ом и убирать сертификат

ip http ssl acme revoke <буквыцифры>.keenetic.io

Либо сбрасывать роутер в заводские и перенастраивать.

Разработчики Keenetic на голубом глазу говорят «проблема известная, обновляйтесь»

Соотв. рекомендуется обновиться, где можно/важно, чтобы потом не мудохаться

Вставить ник
Цитата
Ответить с цитированием

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

6 часов назад, azhur сказал:

А что за проблема с сертификатом, просрочился или что-то не такое тривиальное?

https://4pda.to/forum/index.php?showtopic=883101&st=14780#entry106789105

Цитата

проблема в длине цепочки SSL-сертификатов для домена ***.keenetic.io, которая возникает при записи в память устройства

3 часа назад, VolanD666 сказал:

Не понял. Это вы просто информацию доносите или что-то спросить хотите?

Я информирую.

Разочаровал Keenetic — за такие деньги ещё такие косяки. Эти игры с Облаками и сертификатами от letsencrypt.

Рекомендовали роутеры Keenetic всем, а теперь ТП надо их сбрасывать в заводские и перенастраивать, т.к. не работают из-за 100% загрузки CPU и без доступа до веб.

Вставить ник
Цитата
Ответить с цитированием

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

если именно кинетик — белый корпус, то обновление через телнет до последней версии, если зухель-кинетик — чёрный корпус, то обновление до последней беты?

команды телнет

белый кинетик:

Цитата

components list stable
components commit

чёрный зухель-кинетик:

Цитата
components list delta
components commit

отсюда — https://help.keenetic.com/hc/ru/articles/360021607760-Обновление-прошивки-микропрограммы-роутера-через-интерфейс-командной-строки

В 01.06.2021 в 13:37, Urs_ak сказал:

Разочаровал Keenetic — за такие деньги ещё такие косяки. Эти игры с Облаками и сертификатами от letsencrypt.

ну это, по моему не только к кинетику относится, а ко всем железякам которые лепят с https вэбмордой, сертификат имеет сроки, и после окончания которых производителю придётся выпускать новую прошивку с обновлёнными сертификатами? а если не будет выпускать — кирпич? или танцы с бубном и игры с таймерами?

Вставить ник
Цитата
Ответить с цитированием

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

Может сделать скрипт и просто обновить все роутеры в сети или они не ваши? Либо сделать кнопку ТП, при обращении- предлагать обновление

Вставить ник
Цитата
Ответить с цитированием

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

4 часа назад, sheft сказал:

если зухель-кинетик — чёрный корпус, то обновление до последней беты?

Старые кинетики не подвержены

Вставить ник
Цитата
Ответить с цитированием

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

29 минут назад, jffulcrum сказал:

Старые кинетики не подвержены

Подвержены, в комнате стоит zyxel keenetik air, понадобилось включить на нём 2.4 для ковыряния старого смартфона, всё остальное работает в 5ггц и всё, зайти на него я не смог, плевался и чертыхался с ноута и смарта, ошибка в браузере, перепробовал всё что было начинае с IE6, подумал что умер роутер, но как то очень странно что раздача интернета работало и проблем со связью не было, только неуправляемый. Хорошо что не отключил управление по телнету на нём…

Зависит от того какая прошивка на нём стоит, есть ещё у меня зухель кинетик 4г с прошивкой v2.08(AAUR.4)C2 — вебморда http без сертификатов, с ней проблем нет.

Вставить ник
Цитата
Ответить с цитированием

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

Стоит дома в спальне Keenetc City. Чистые http, telnet, ssh. Никаких эсов. Он, правда, в режиме бриджа, роутер не он. Может, поэтому.

Вставить ник
Цитата
Ответить с цитированием

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

Join the conversation

You can post now and register later.

If you have an account, sign in now to post with your account.

Источник

ZyXEL / Keenetic Omni — Discussion | [wifirouter]

Hello everyone !!! People have such a question how to turn on the zuxel omni 2 modem in bridge mode ???

son2305,
it all depends on what kind of firmware you have at the moment.
From versions 2.05 — mode switching can be done via the WEB interface:
Additional modes of operation of Internet centers
There is another way through the CLI. It is relevant for earlier firmware in which there are no menus.
We readfastand addition (post below).

Post has been edited_Danila_Master_ — 22.08.17, 16:07

_Danila_Master_,
That is, I just have to put the access point in mode and that’s it?

son2305, what you owe to is up to you to decide;)
Read the instructions; links are given above.

Component kit

NDMS Platform — Installed

Base system:

Quick Setup NetFriend — Installed
Wi-Fi Interface — Installed
Dynamic DNS Client (DDNS) — Installed
USB Interface — Installed
Service IGMP / PPPoE proxy — Installed
UPnP Service — Installed
DHCP Server — Installed
Network Accelerator — Installed

Modes:

Adapter Mode — Installed
Access Point Mode — Installed
Amp Mode — Installed

Networking:

Cordless Telephone Exchange DECT — Not Installed
Network Packet Capture Module — Not Installed
GRE Tunnels — Installed
EoIP Tunnels — Installed
SNMP Server — Not Installed
IPv6 Not Installed
Application Level Gateway (ALG) for SIP — Installed
PPP Library — Installed
PPTP Client — Installed
Application Level Gateway (ALG) for PPTP / GRE — Installed
Application Level Gateway (ALG) for FTP — Installed
Application Level Gateway (ALG) for RTSP — Not Installed
Bandwidth management of network nodes and interfaces — Installed
IP tunnels IP — Installed
L2TP Client — Installed
PPPoE Client — Installed
KABiNET Authorizer — Installed
Authorization in the provider’s network via 802.1x protocol — Not installed
Application Layer Gateway (ALG) for H.323 — Not Installed

Applications:

DLNA Server — Not Installed
Internet access check (Ping checker) — Installed
AFP Server — Not Installed
File and Printer Access Protocol Server on Windows Networks — Installed
Cloud Management Router Control Module — Installed
Internet filter Yandex.DNS — Installed
BitTorrent Client Transmission — Installed
UDP-HTTP proxy (udpxy) — Not installed
IPsec VPN — Installed
VPN Server — Installed
SkyDNS Internet Filter — Installed
FTP Server — Installed

USB modems:

ADSL2 + / VDSL2 Modem — Not Installed
Samsung CMC-730 USB Modem for WiMAX Network — Not Installed
USB modems for dial-up phone lines — Installed
USB Modems in NDIS Mode — Installed
4G / LTE / WiMAX USB Modems that Emulate an Ethernet Port — Installed
3G / CDMA USB modems emulating RS-232 port — Installed

USB storage:

USB Drive Support — Installed
File System NTFS — Installed
FAT32 File System — Installed
Folder Rights Management — Installed
File System HFS + — Installed

Opkg:

Open Package Support — Not Installed

Changes

Version 2.08.C.2.0-2 (official release):

Keenetic LTE LTE module firmware updated: bug to connect to Beeline fixed
added support for Tandem 3G / 4G modems of various modifications
Linux, tty module: fixed bug when working with E392 and similar USB modems on Keenetic III; fixed possible deadlock on SMP devices when closing tty (for example, pppd serial hang-up)
Wi-Fi: access points added — WifiMaster1 / AccessPoint1, 2 and 3 interfaces for 5 GHz band
IPv6: fixed handling of prefixes longer than 64 bits (reported by @gaaronk)
AFP: from the 2.10 branch, improvements to the service work were transferred, including the bug «dsi_stream_read: len: 0, unexpected EOF» (reported @ hondaspb)
DLNA: fixed binding of an SSDP socket to an interface (reported by @enpa)
IPsec: added command to force ESP to UDP: crypto map {name} force-encaps
IPsec: when setting up different connection groups that are not compatible with each other, only one group of connections remains working: Virtual IP server — the highest priority; tunnels that are configured manually via the Web; automatic IP-IP, GRE, etc. tunnels that can only be enabled through the CLI
CIFS: fixed detection of printers (reported by @ K1fa)
Transmission: fixed selection of download directory that caused tmpfs memory overflow after disconnecting USB drive
Fixed transfer of the ^ character in AT-commands for initialization (reported by @ Kinetic Guide)
DNS proxy memory leak fixed
improved DTMF recognition on Keenetic III
Patch has been moved to the core, which speeds up PPTP / MPPE by 30% *
updated OpenSSL to 1.0.2l
* Ultra II on synthetic tests

(c)https://forum.keenetic.net/

Keenetic Omni II_v2.08 (AAUS.2) C2.zip(7.02 MB)

Mirror:
cloud.mail — v2.04, v2.05, v2.06, v2.07, v2.08 Firmware Keenetic
yandex.disk — v2.04, v2.05, v2.06, v2.07, v2.08 Firmware Keenetic

Good day, dear forum users. Tell me please, is there any 5GHz in Keenetik Omni. and how to activate if available?

Information. Read a must.

It is stableofficialfirmware version 2.09 (released forother models Keenetic) We say thanks to the developers for not forgetting about the old (popular) Keenetic devices and unofficially continue to release 2.09 firmware versions for these router models.

This version will not appear on the official Keenetic firmware channel and on the Keenetic.net website. Official development of firmware for Omniis finished, i.e. 2.07 is the latest officially released firmware. The developers of ndmsystem have not forgotten about us and continue to release firmware for Omni. Those. 2.09 releasedofficially legallyon the initiative of the developers, for which many thanks to them.

If you have any problems with firmware 2.09, please write about it onfirmware development forum. Bug reports official tech support Keenetic will not accept!

Component kit

NDMS Platform — Installed

Base system:

Network Accelerator Installed
USB Interface Installed
Dynamic DNS Service Client (DDNS) Installed
Quick Setup NetFriend Installed
IGMP / PPPoE proxy service Installed
DHCP Server — Installed
UPnP Service — Installed
Wi-Fi Interface — Installed

Modes:

Client Mode Wi-Fi — Installed
Wi-Fi AP Mode — Installed
Wi-Fi amplifier mode — Installed

Networking:

Keenetic Plus DECT — telephone base station — Not installed
IP-IP Tunnels — Not Installed
Network Packet Capture — Not Installed
GRE tunnels — Not installed
EoIP Tunnels — Not Installed
IPv6 — Not Installed
Application Level Gateway (ALG) for SIP — Installed
Application Layer Gateway (ALG) for H.323 — Not Installed
Application Level Gateway (ALG) for FTP — Installed
Application Level Gateway (ALG) for RTSP — Not Installed
L2TP Client — Installed
Application Layer Gateway (ALG) for PPTP / GRE — Installed
SNMP Server — Not Installed
Internet speed limit for clients (Shaper traffic) — Installed
PPPoE Client — Installed
Authorization provider CABiNET — Installed
802.1X Client — Not Installed
Traffic Classification and IntelliQoS Service — Not Installed
PPTP Client — Installed

Applications:

Checking the status of the Internet connection (Ping Check) — Installed
FTP Server — Installed
DLNA Server — Not Installed
UDP-HTTP Proxy (udpxy) — Not Installed
Internet filter Yandex.DNS — Installed
Internet filter and parental control SkyDNS — Installed
BitTorrent Transmission Client — Not Installed
PPTP VPN Server — Not Installed
File and Printer Sharing (SMB / CIFS) — Installed
IPsec VPN — Not Installed
Remote Control via Cloud and KeenDNS — Installed
File Sharing (Apple File Protocol and Time Machine) — Not Installed

USB modems:

3G / 4G USB Modems — Installed
Keenetic Plus DSL — USB Modem ADSL2 + / VDSL2 — Not Installed
3G / 4G NDIS USB Modems — Installed
USB modems for dial-up phone lines — Installed
Samsung CMC-730 USB Modem for WiMAX Network — Not Installed
3G / 4G CDC Ethernet USB Modems — Installed

USB storage:

Folder Access Control — Not Installed
File System HFS + — Installed
USB Drive Support — Installed
FAT32 File System — Installed
File System NTFS — Installed

Opkg:

Kernel Modules to Support File Systems — Not Installed
Kernel Modules to Support USB DVB Tuners — Not Installed
Kernel Modules for USB Audio Support — Not Installed
Xtables-addons Extension Pack for Netfilter — Not Installed
USB over IP Subsystem Kernel Modules — Not Installed
Netfilter Subsystem Kernel Modules — Not Installed
Traffic Control Kernel Modules — Not Installed
Open Package Support — Not Installed
Kernel Modules to Support USB Video — Not Installed

Changes

Version 2.09.C.1.0-0 (official release *):

Keenetic LTE LTE module firmware updated: bug to connect to Beeline fixed
DECT: fixed asterisk compatibility issue (switching calls with G722 codec)
DECT: fixed a problem when registering a line when there is an external outgoing call without a dialed number

* Officially released for Keenetic Start II, Lite III rev.B, 4G III rev.B, Giga III, Ultra II, Air and Extra II.
Rebuilt into delta for Keenetic II, III, Giga II, Ultra, Lite II, Lite III, 4G III, Omni, Omni II, Viva, Extra, DSL, VOX and LT

(c)https://forum.keenetic.net/

Keenetic Omni_2.09.C.1.0-0.zip(5.82 MB)

Mirror:
cloud.mail — v2.04, v2.05, v2.06, v2.07, v2.08, v2.09 Firmware Keenetic
yandex.disk — v2.04, v2.05, v2.06, v2.07, v2.08, v2.09 Firmware Keenetic

Information. Read a must.

This version will not appear on the official Keenetic firmware channel and on the Keenetic.net website. Official development of firmware for Omniis finished, i.e. 2.08 is the latest officially released firmware. The developers of ndmsystem have not forgotten about us and continue to release firmware for Omni. Those. 2.09 releasedofficially legallyon the initiative of the developers, for which many thanks to them.

If you have any problems with firmware 2.09, please write about it onfirmware development forum. Bug reports official tech support Keenetic will not accept!

Component kit

NDMS Platform — Installed

Base system:

Network Accelerator Installed
USB Interface Installed
Dynamic DNS Service Client (DDNS) Installed
Quick Setup NetFriend Installed
IGMP / PPPoE proxy service Installed
DHCP Server — Installed
UPnP Service — Installed
Wi-Fi Interface — Installed

Modes:

Client Mode Wi-Fi — Installed
Wi-Fi AP Mode — Installed
Wi-Fi amplifier mode — Installed

Networking:

Keenetic Plus DECT — telephone base station — Not installed
IP-IP Tunnels — Not Installed
Network Packet Capture — Not Installed
GRE tunnels — Not installed
EoIP Tunnels — Not Installed
IPv6 — Not Installed
Application Level Gateway (ALG) for SIP — Installed
Application Layer Gateway (ALG) for H.323 — Not Installed
Application Level Gateway (ALG) for FTP — Installed
Application Level Gateway (ALG) for RTSP — Not Installed
L2TP Client — Installed
Application Layer Gateway (ALG) for PPTP / GRE — Installed
SNMP Server — Not Installed
Internet speed limit for clients (Shaper traffic) — Installed
PPPoE Client — Installed
Authorization provider CABiNET — Installed
802.1X Client — Not Installed
Traffic Classification and IntelliQoS Service — Not Installed
PPTP Client — Installed

Applications:

Checking the status of the Internet connection (Ping Check) — Installed
FTP Server — Installed
DLNA Server — Not Installed
UDP-HTTP Proxy (udpxy) — Not Installed
Internet filter Yandex.DNS — Installed
Internet filter and parental control SkyDNS — Installed
BitTorrent Transmission Client — Not Installed
PPTP VPN Server — Not Installed
File and Printer Sharing (SMB / CIFS) — Installed
IPsec VPN — Not Installed
Remote Control via Cloud and KeenDNS — Installed
File Sharing (Apple File Protocol and Time Machine) — Not Installed

USB modems:

3G / 4G USB Modems — Installed
Keenetic Plus DSL — USB Modem ADSL2 + / VDSL2 — Not Installed
3G / 4G NDIS USB Modems — Installed
USB modems for dial-up phone lines — Installed
Samsung CMC-730 USB Modem for WiMAX Network — Not Installed
3G / 4G CDC Ethernet USB Modems — Installed

USB storage:

Folder Access Control — Not Installed
File System HFS + — Installed
USB Drive Support — Installed
FAT32 File System — Installed
File System NTFS — Installed

Opkg:

Kernel Modules to Support File Systems — Not Installed
Kernel Modules to Support USB DVB Tuners — Not Installed
Kernel Modules for USB Audio Support — Not Installed
Xtables-addons Extension Pack for Netfilter — Not Installed
USB over IP Subsystem Kernel Modules — Not Installed
Netfilter Subsystem Kernel Modules — Not Installed
Traffic Control Kernel Modules — Not Installed
Open Package Support — Not Installed
Kernel Modules to Support USB Video — Not Installed

Changes

Version 2.09.C.1.0-0 (official release *):

Keenetic LTE LTE module firmware updated: bug to connect to Beeline fixed
DECT: fixed asterisk compatibility issue (switching calls with G722 codec)
DECT: fixed a problem when registering a line when there is an external outgoing call without a dialed number

(c)https://forum.keenetic.net/

Keenetic Omni II_2.09.C.1.0-0.zip(6.47 MB)

Mirror:
cloud.mail — v2.04, v2.05, v2.06, v2.07, v2.08, v2.09 Firmware Keenetic
yandex.disk — v2.04, v2.05, v2.06, v2.07, v2.08, v2.09 Firmware Keenetic

Post has been editedenpa — 10.09.17, 10:17

Firmware 2.11 for ZyXEL Keenetic Omni router

Before installing the firmware, be sure to dobackup firmware and startup-config — here1, here2

After updating the router to 2.11, it is recommended to do Reset to factory settings , configure the router from scratch.

* Experimental firmware (Debug version)

Screenshots

Component kit

NDMS Platform — Installed

Base system:

Quick Setup NetFriend — Installed
USB Interface — Installed
Dynamic DNS Service (DDNS) Client — Installed
Network Accelerator — Installed
DHCP Server — Installed
Service IGMP / PPPoE proxy — Installed
UPnP Service — Installed
Wi-Fi Interface — Installed

Modes:

Wi-Fi amplifier mode — Installed
Client Mode Wi-Fi — Installed
Wi-Fi AP Mode — Installed

Networking:

IP-IP Tunnels — Not Installed
PPPoE Client — Installed
GRE tunnels — Not installed
EoIP Tunnels — Not Installed
Traffic Classification and IntelliQoS Service — Not Installed
IPv6 — Installed
Application Level Gateway (ALG) for SIP — Installed
SNMP Server — Not Installed
OpenVPN Client — Not Installed
PPTP Client — Installed
Network Packet Capture — Not Installed
Internet speed limit for clients (Shaper traffic) — Installed
Application Level Gateway (ALG) for RTSP — Not Installed
Traffic Classification and IntelliQoS Service — Not Installed
Application Level Gateway (ALG) for FTP — Installed
L2TP Client — Installed
Keenetic Plus DECT — telephone base station — Not installed
Authorization provider CABiNET — Installed
802.1X Client — Not Installed
Application Level Gateway (ALG) for H.323 — Installed
Application Level Gateway (ALG) for PPTP / GRE — Installed

Applications:

File Sharing (Apple File Protocol and Time Machine) — Not Installed
FTP Server — Installed
File and Printer Sharing (SMB / CIFS) — Not Installed
Norton ConnectSafe DNS Internet Filter — Not Installed
Captive portal — Not installed
Internet filter Yandex.DNS — Installed
DLNA Server — Not Installed
UDP-HTTP Proxy (udpxy) — Not Installed
BitTorrent Transmission Client — Not Installed
Checking the status of the Internet connection (Ping Check) — Installed
Remote Control via Cloud and KeenDNS — Installed
IPsec VPN — Not Installed
Internet filter and parental control SkyDNS — Installed
PPTP VPN Server — Not Installed

USB modems:

3G / 4G USB Modems — Installed
Keenetic Plus DSL — USB Modem ADSL2 + / VDSL2 — Not Installed
3G / 4G NDIS USB Modems — Installed
Samsung CMC-730 USB Modem for WiMAX Network — Not Installed
3G / 4G CDC Ethernet USB Modems — Installed
USB modems for dial-up phone lines — Installed

USB storage:

Folder Access Control — Not Installed
File System HFS + — Installed
USB Drive Support — Installed
FAT32 File System — Installed
File System NTFS — Installed

Opkg:

Kernel Modules to Support File Systems — Not Installed
Kernel Modules for USB Audio Support — Not Installed
Kernel Modules to Support USB Video — Not Installed
Xtables-addons Extension Pack for Netfilter — Not Installed
Netfilter Subsystem Kernel Modules — Not Installed
Traffic Control Kernel Modules — Not Installed
USB over IP Subsystem Kernel Modules — Not Installed
Open Package Support — Not Installed
Kernel Modules to Support USB DVB Tuners — Not Installed

Changes

Version 2.11.A.1.0-0 of 09.09.2017:

Experimental version , in branch 2.10, active work has been suspended due to preparations for the release of the official beta, see change log 2.10

L2TP / IPsec server added (details in separate topic)
Norton ConnectSafe DNS component added, configured via CLI in the nortondns section, similar to yandexdns
the Internet indicator (globe) lights up according to the results of connection to popular Internet sites: show internet status
Transmission: fixed a number of GUI errors: returned context menu, remaining free space, fixed nested directories (reported by @esa)
DECT: Early Media support added — music from server when dialing
DECT: added support for Easy Intercom — internal call without dialing when two handsets are registered
Chilli: Fixed the appearance of extra fields when switching profiles
Chilli: walled garden size increased to 64 entries
Web: Added inclusion of WifiMaster1 / AccessPoint1 in the guest segment (reported by @enpa)

Version 2.11.A.1.0-1 of 09/11/2017:

fixed spontaneous system reboot (reported by @KorDen)
Transmission: fixed error tr_crypto error: 05066066: lib (5): func (102): reason (102) (reported @enpa)
DECT: fixed reset of missed call notification (reported by @KorDen)

Version 2.11.A.2.0-0 dated 09.18.2017:

LLDP protocol support added, enabled automatically: interface {name} lldp disable — disable broadcasting on the specified interface
Captive Portal transferred to use the shaper from the trafficcontrol component.
fixed 100% CPU load when the guest network was turned on (reported by @ Sort44)
fixed TcpSocket certificate validation failed * error (reported by @Goblin)
IPsec: fixed reuse of addresses from the L2TP server pool (reported by @ Kinetic Guide)
IPsec: fixed disabling of NAT for L2TP server clients (reported @ Kinetic Guide)
IPv6: DHCP client starts independently of ICMPv6 RS (reported by @ Ivan Erokhin)
Web: fixed progress bar fading when installing updates
Web: the status of «Internet access» corresponds to show internet status

Version 2.11.A.3.0-0 dated 09.22.2017:

fixed kernel panic when accessing a disk through a VPN tunnel (reported by @enpa)
fixed IGMP snooping during multicast transmission to two or more TV ports
Fixed L2TP / IPsec server on big-endian platform (LTE, DSL, VOX)
IPsec: IKE SA and Phase2 SA lifetime configuration commands have been added: interface ipsec lifetime ipsec
Captive Portal: fixed error «packet dropped due to congestion» when working under load
Web: restored dependencies in the list of components
Added component «New web-interface design (beta)» * **
updated OpenSSL to 1.1.0f

* for all devices except Keenetic III, DSL, VOX and LTE
** appears in the list after upgrading to version 2.11.A.3.0-0 and higher

Version 2.11.A.3.0-1 of 09/23/2017:

DECT: TLS is disabled due to incompatibility with OpenSSL 1.1 (reported by @ iggo)

Version 2.11.A.3.0-2 of 09/26/2017:

fixed reboot when creating a wired connection (reported @enpa and also @ sokol2007)
removed gateway check if EasyConfig is not installed (reported by @BadWolf)
CIFS: Fixed the bug «Destructive crash» when creating a file from under Windows 10 (reported by @BeaViSs)
Transmission: HTTPS resumed (reported by @Unfaithful)
DECT: restored SIP TLS operation under OpenSSL 1.1
LLDP is disabled by default on public and protected interfaces.

Version 2.11.A.4.0-0 of 09/30/2017:

ACME client added to get a free certificate Let’s Encrypt *: ip http ssl acme get [domain] — get a certificate for the specified domain name ** (default KeenDNS), ip http ssl acme revoke — revoke the certificate, ip http ssl acme list — print list of certificates, ip http ssl acme set-default — select the default certificate
added the command to disable NAT Loopback (at the request of @gaaronk): interface {name} no ip nat loopback
Added output of RSSI, CINR, RSRP, RSRQ parameters on Huawei E3372h modems
Fixed the likely cause of frame engine blocking when running Giga III and Ultra II with PPE on under load
Web: fixed bugs on the update page (reported @ r13)
Web: removed access point filter on # wireless.acl page (reported by @Andrey Kupreychik (Foxel))
Web: various new design fixes and improvements

* works in test mode using Let’s Encrypt staging environment
** the name should be the web server kinetics on port 80
Version 2.11.A.4.0-1 dated 10.10.2017:

Wi-Fi: Peak TX performance of RT5392 / 5592 chips increased by 25% (Keenetic II, Giga II, Ultra, LTE, DSL, VOX)
Wi-Fi: fixed kernel crash on receiving MPDU packet more than 3840 bytes on RT3593 and MT7602E / 7612E (Keenetic Ultra, Air, Extra II, Giga III, Ultra II)
Wi-Fi: Fixed support for VHT40 (433Mbps) by the AP-Client on the MT7602E / 7612E (Keenetic Air, Extra II, Giga III, Ultra II)
Wi-Fi: updated MT7602E / 7612E microcode
Wi-Fi: AP-Client «Key Reinstallation Attacks: Forcing Nonce Reuse in WPA2, ACM CCS 2017» vulnerability fixed
Wi-Fi: Fixed Band Steering with dual-band Apple devices
added DNAT rules to outgoing OUTPUT traffic (as requested by @Ainvain)
Removed restarting of the DHCP client in case of disconnection of associated PPTP / L2TP connections with no global sign (reported by @enpa)
UPnP: fixed the bug «getifaddr: broken XML in NDM response» when working through CdcEthernet (reported by @Mobis FromPNZ)
DECT: fixed SIP INFO processing
DECT: fixed dialing rules test
DECT: Removed the appearance of «Insert DECT Dongle» when changing settings
Http:setting up access to the web interface automatically opens port 443
Transmission: changing peer-port via RPC / GUI is saved in the main config
restored Keenetic DSL and VOX assembly

Version 2.11.A.4.0-2 dated 10/14/2017:

reduced DHCP renew rate when working in conjunction with L2TP (reported by @ Ret-xc7)
fixed cyclic reconnections E3372h (reported by @ TheRock666)
CIFS: added resetting the BUSY flag on Xerox Phaser 3140 printers (reported by @ Vasily Piskaryov)
VoIP: SIP client improved when connected via USB-modem (Keenetic III, DSL, VOX)
DECT: Improved DTMF Recognition Quality
Web: added L2TP / IPsec VPN server component with a new design settings page
Web: added auto-updates daw
Web: added Wi-Fi Tx-Burst jackdaw
Improved performance of the network kernel stack when IGMP snooping
nginx updated to version 1.13.6

Version 2.11.A.5.0-0 of 10/21/2017:

DECT: improved support for incoming calls for handsets — Panasonic KX-TGA710, Panasonic KX-TGA131, Panasonic KX-A115, Gigaset SL450HX
DECT: Increased the supported length of the names of the tubes and lines to 50 characters
DECT: fixed web interface hang-up when re-registering a handset
Web (beta): Fixed L2TP / IPsec VPN server setup page
Web (beta): OpenVPN support added

Version 2.11.A.6.0-0 of 10/27/2017:

Added new KeenDNS domains with automatic SSL certificate receipt
Let’s Encrypt Production Environment mode is enabled for obtaining white DST Root CA X3 SSL certificates
Automatic redirection is enabled for domains with an SSL certificate, with the option of disconnecting:
no ip http ssl redirect
added brute force protection HTTPS
fixed global priority when configuring VPN connections (reported by @enpa)
increased limit of registered hosts from 64 to 256
Added support for arbitrary Keenetic LTE init commands (as requested by @Luice Carol):
interface UsbLte0 lte init {string}
Web (beta): added form-based authorization and «Exit» button
Web (beta): the segment setting logic has been completely redesigned.
Web (beta): interactive language switching implemented
IPsec: added support for special characters in the PSK key
IPsec: added rekey process control commands to eliminate potential traffic loss:
crypto ipsec rekey make-before — enable installation of new SA until the previous ones break
crypto ipsec rekey delete-delay {delay} — wait for delay seconds before deleting outdated SAs after receiving the DELETE command from the remote side
DLNA: the force_sort_criteria option is enabled (asked by @ Alexander Sukhorukov)
DECT: fixed SIP registration interval setting

Version 2.11.A.6.0-1 of 11/03/2017:

Web (beta): implemented the ability to add a port in several segments
Web (beta): added HTTPS icon when choosing keenetic.pro and keenetic.link domains
Web (beta): added button to enable auto updates
Web (beta): fixed cloud service switch
Web (beta): fixed system time settings
DLNA: DSF / DFF audio format support added (at the request of @ a.tishin1982 @ mail.ru)
DLNA: root container configuration command was added (at the request of @m__a__l): dlna container (browse | music | video | images), no dlna container — disable the setting
ASIX AX88772 USB adapter support restored, AX88179 and Realtek 8150/52/53 support added (at the request of @ vasek00)
updated OpenSSL to 1.1.0g

Version 2.11.A.7.0-0 of 11/08/2017:

kernel crash fixed during intensive traffic transmission through CDC NCM modem fixed
Added support for accelerating the processing of traffic in ppe software from USB-Ethernet dongles on Realtek 8152/8153 chips
L2TP, PPTP: added sending LCP TERMREQ to reduce the possibility of a «too many connections» error when reconnecting
AFP: fixed bug «AVAHI»: unexpectedly stopped (reported by @Lordmaster)
SIP: SIP ALG Direct Media configuration command added, disabled by default: [no] ip sip alg direct-media
Web (beta): if set, default
Web (beta): added transmission
Web (beta): Fixed saving PPP connection settings

Version 2.11.A.8.0-1 dated 11/09/2017:

Fixed a redirect to a new design of the Web interface (reported @ r13)
component added — NetFlow sensor: interface {name} ip flow (ingress | egress | both) —to turn on the NetFlow sensor on the specified interface, ip flow-cache timeout active {timeout} —the storage time of active sessions in cache, in minutes (from 1 30, default 10), ip flow-cache timeout inactive {timeout} — the storage time of inactive sessions in the cache, in seconds (from 1 to 600, default 20), ip flow-export destination {address} {port} —
collector address and port
DLNA: force_sort_criteria option removed (asked @ r777ay)

Version 2.11.A.8.0-2 dated 11/11/2017:

Chilli: added commands :, interface {name} chilli lease {lease} — client IP lease time in seconds (default 600), interface {name} chilli nasmac {mac} — MAC address transmitted in the RADIUS attribute Called- Station-ID (the default MAC address of the guest network)
Web (beta): initial setup wizard added, displayed after reset to factory configuration
Web (beta): fixed wired PPP setting
Web (beta): fixed band-steering switch position
Web (beta): fixed adding and configuring users, including FTP
Web (beta): language switching fixed
DECT: fixed display of exported call history in Windows Notepad
DECT: fixed binding of tubes to lines
DECT: fixed the call history file path
DECT: added saving phone book in the same directory with call history (at the request of @KorDen)
DECT: limit set for maximum call log file size
Http:certificate receipt disabled if the Web server port is changed
Http:Fixed access to the proxy (ip http proxy) over HTTPS
added support for Huawei K5150 USB modem

Version 2.11.A.8.0-3 dated 11/11/2017:

fixed saving files via http / ci (reported by @enpa)

Version 2.11.A.8.0-4 of 11/13/2017:

Web (beta): fixed interface work in Android WebView
DECT: fixed the failure of the telephony module when displaying active calls

Version 2.11.A.8.0-5 of 11/18/2017:

CIFS: LLMNR support added (at the request of @ r13)
CIFS: Fixed reading of large files (reported by @Unfaithful)
Wi-Fi: fixed incorrectly assigning a MAC address to 5 GHz, which caused SSID visibility and connectivity issues (reported @JumpFire)
DECT: improved automatic recovery of the telephony module after a crash
DECT: improved synchronization of call history between the internal memory of the router and USB-drive
FTP:UTF-8 encoding is enabled for correct display of file names under Mac OS

Version 2.11.A.8.0-8 dated 11/25/2017:

Wi-Fi: Delayed when triggering Band Steering and associated gaps probe / auth response
DLNA: Premature service start and database reindexing with two or more drives eliminated
Chilli: added bandwidth limit for unregistered hosts
Web: fixed permissions designations (reported by @Roman_Petrov)

Version 2.11.A.9.0-0 of December 3, 2017:

The operation of E3276 USB modems on HiLink firmware was restored (attention: regression is possible in the work of other CdcEthernet modems)
IPv6: added blocking of IPv6 traffic when Internet access is denied by hosts
Wi-Fi: fixed indicator performance on Keenetic 4G III rev. B and Lite III rev. B
DLNA: added sorting command:
dlna sort (track | album | date | title | class) [ascending | descending]
IPsec: DHCP server is enabled for distributing INFORM options to L2TP clients (asked @Kynikovod)
IPsec: updated strongSwan to version 5.6.1
PPP: added command for setting the interval between repeated connections:
interface {name} reconnect-delay {sec} — in seconds from 3 to 600, default 3
SNMP: Enabled in access point mode
Web (beta): added ability to configure additional segments in access point mode
Web (beta): added Captive Portal section, updated profile list
Web (beta): connection priorities fixed

Version 2.11.A.9.0-1 of 12/05/2017:

Fixed Hotspot :: Account: system failed [0xcffd04b5] (reported @ r13)
Fixed Network :: ArpTable: system failed [0xcffd0445] (reported @ r13)
Fixed the error too many log arguments in a stream: ->IPv6 (% 1): [% 2] (reported by @enpa)
fixed UDP error Failed to set receive buffer (reported by @enpa)
Web: Fixed the operation of the page # dashboard.connections (reported by @ sokol2007 and also @iggo)
DNS: Removed RA flag from requests (reported @ r13)
DNS: an algorithm for sending queries based on the ranking of DNS servers by response rate is implemented
Opkg: opkg-kmod-tc kernel modules are in manual boot mode

Version 2.11.A.9.0-2 of December 7, 2017:

Fixed Hotspot :: Account: system failed [0xcffd04b7] (reported @ r13)
DNS: bug fixed Service: «Dns :: Proxy»: unexpectedly stopped (reported by @enpa)
CIFS: fixed accessibility of the service from the guest network (reported by @ Oleksii)
VoIP: fixed 406 Not Acceptable bug with RTCP attribute in INVITE SDP

Version 2.11.A.9.0-3 of 09.12.2017:

Wi-Fi: fixed race condition and associated kernel crash in BssEntrySet function
Wi-Fi: improvements have been made to Band-Steering
CIFS: eliminated sending NetBIOS packets to public interfaces (reported by @ vasek00)
Web: fixed tab # usb.afp (reported by @AndreBA)
Web: # broadband.ppp tab restored (reported by @stitchix)
FTP:Added a default encoding setting, changing to UTF-8 caused a tntfs error «Failed to convert name to Unicode»
ip ftp client-charset {charset}
Added support for USB modem E5573, fixed work of similar modems on HiLink 22.323 firmware
Fixed picture fading when some Smart TV models work over the wire via Keenetic Start II, 4G III rev. B, Lite III rev. B, Air and Extra II

Version 2.11.A.9.0-4 dated 12.15.2017:

DNS: SkyDNS and Yandex.DNS «not available» bug fixed (reported @ r777ay)
IPsec: fixed StrongSwan launch (reported by @KorDen)
VoIP: fixed one-way audibility for incoming calls, the operator Mango Telecom
Web (beta): search feature added
Web (beta): Opkg support added

(c)https://forum.keenetic.net/

Keenetic Omni_2.11.A.1.0-1.zip(6.08 MB)

Keenetic Omni_2.11.A.2.0-0.zip(6.1 MB)

Keenetic Omni_2.11.A.3.0-1.zip(6.16 MB)

Keenetic Omni_2.11.A.3.0-2.zip(6.16 MB)

Keenetic Omni_2.11.A.4.0-0.zip(6.32 MB)

Keenetic Omni_2.11.A.4.0-1.zip(6.32 MB)

Keenetic Omni_2.11.A.4.0-2.zip(6.32 MB)

Keenetic Omni_2.11.A.5.0-0.zip(6.32 MB)

Keenetic Omni_2.11.A.6.0-0.zip(6.33 MB)

Keenetic Omni_2.11.A.8.0-5.bin.zip(6.36 MB)

Keenetic Omni_2.11.A.9.0-4.bin.zip(6.42 MB)

Mirror:
cloud.mail — v2.04, v2.05, v2.06, v2.07, 2.08, 2.09, 2.10, 2.11 (Test, Beta Firmware) All Keenetic
yandex.disk — v2.04, v2.05, v2.06, v2.07, 2.08, 2.09, 2.10, 2.11 (Test, Beta Firmware) All Keenetic

If there are problems with the firmware

Post has been editedenpa — 20.12.17, 14:35

Reason for editing: 2.11.A.9.0-4 from 12/15/2017

Hey.
There is this router on the padawan firmware (on the stock the same problem)
Internet PPPoE 100 100 megabits.

When loading at maximum speed, the Internet disappears for 10 minutes with an error in the log

timeout waiting for pado packets

I changed the firmware, the PSU changed — the same problem.
Directly in an Internet computer works without problems.

Where to dig?

Tell me, does omni II cut speed when connected to a home beeline via l2tp? Now some simple old asus, gives a maximum of 40 megabits at a tariff of 100.
How normal is the torrent client? I thought about replacing the asus, if at these points the standards are buzzing.

OHucuM @ 09/21/17, 18:34

Tell me, does omni II cut speed when connected to a home beeline via l2tp?

It doesn’t cut anything, it will be as given at the tariff. The built-in rocking chair is more or less convenient.

Posted on 09/22/2017, 13:38:

When loading at maximum speed, the Internet disappears for 10 minutes with an error in the log

Tried to ask technical support? Che say?

When trying to update, the error «Server error Insufficient memory to install all selected components» pops up. What to do?

CTAC_TPEHEP , go to the «Components» section, remove unnecessary components (uncheck) and only then click on Update …

Post has been edited_Danila_Master_ — 28.09.17, 15:10

Reason for editing: …

Tell me Keenetic Omni II, version NDMS v2.08 (AAUS.3) C2, can I sew current unofficial firmware?

Torgrin , You can only manually update, after downloading the firmware to the computer.

Guys, maybe a stupid question. But how to download files from a computer to an external hard drive that is connected via DLNA? About the torrent client is clear, interested in direct access

Swankmotor @ 10.22.2017, 23:40

Guys, maybe a stupid question. But how to download files from a computer to an external hard drive that is connected via DLNA? About the torrent client is clear, interested in direct access

There should be a component for file and printer sharing or ftp, which is more familiar. Install it, the corresponding tab will appear in the settings. You configure access rights and rejoice. Sometimes a router in a network environment is not visible, but it goes by ip. I mounted the hdd as a network drive and now always opens.

Post has been editedArbo — 23.10.17, 01:48

Torgrin, can, by file upload .

Posted on 10/27/2017, 09:45:

swankmotor, wrote to you in hp.

Источник

Для чего это нужно? Например мы хотим поставить дополнительные пакеты OPKG как это сделать? (keenetic установка opkg)
Для этого нам нужно установить Операционную систему.

Ставится она на внешний накопитель флешка usb HDD SSD
Предварительно накопитель нужно подготовить создать раздел или полностью сделать формата ext2 ext3 не работает с ФС ext4 для устройств с прошивкой 2.07 и новее По итогу на жесткий диск у меня нормально заработал на ext4

Как сделать формат ext2 3 4?

Скачать MiniTool Partition Wizard Home Edition пароль на архив 123456
запускаем программу MiniTool Partition Wizard Home Edition
Шаг 1
Вставляем sd-карту в картридер. Кардридер само собой подключаем к компьютеру. Если есть необходимость делаем бэкап данных с флешки, т.к. при делении все данные сотрутся!

Шаг 2
Открываем MiniTool Partition Wizard Home Edition, находим нашу карту и удаляем раздел, нажав пункт»Delete» в контекстном меню:

Шаг 3
Далее жмем пункт «Create» на неразменном пространстве карты:
Перед нами откроется окно, где мы будем настраивать параметры раздела.

Шаг 4 Сперва должен быть раздел Fat32 спереди иначе комп не будет открывать флешку!!!!
Сначала создаем раздел типа FAT/FAT32, на котором будут храниться ваши обычные данные типа фоток, музыки, всяких файлов. Это будет раздел под ваши нужды.
Для этого в пункте «File System» выбираем тип FAT или FAT32:
Для карточек до 2гб советуют выбирать тип FAT. Если карточка 4гб и более, то выбираем тип FAT32.
Далее, в пункте «Create As» выбираем пункт «Primary»
В пункте «Drive Letter» присваивается буква тома(это как буква локального диска и т.д.). Также в графе «Partition Label» можете ввести название(метку) вашего раздела. Я назвал к примеру «SDCARD».
После в пункте «Partition Size» выбираем размер нашего раздела и жмем «ОК»:
Шаг 5
Аналогично жмем пункт «Create» на неразмеченной области карты и создаем теперь раздел, на котором будут храниться перенесенные на sd-карту приложения.
При этом может выскочить окно с предупреждением типа:
Смело жмем «ОК» и идем далее.
Но теперь в графе «File System» выбираем тип EXT2 или EXT3 или EXT4
В пункте «Create As» опять выбираем «Primary», вписываем если хотим название-метку, а размер раздела будет как остаток карты. И жмем «ОК».

Шаг 6
Теперь жмем в левом верхнем углу кнопку «Apply» и соглашаемся с изменениями:
После запустится процесс обработки и, если все будет успешно, вылезет окно

Или же можно флешку, отформатированная в Ext2/Ext3/Ext4. В Windows для форматирования можно воспользоваться EaseUS Partition Master free.

После подготовки ставим флешку в keenetic

Далее нам нужно скачать исходник образа системы Для разных моделей есть разные версии OS читаем например тут Репозиторий Entware-Keenetic я для giga kn-1010 буду ставить Debian stable есть так же Entware Мне привычнее Debian поэтому я качаю 10 версию debian-buster-10_3-mipsel.tar.gz MIPSel (с порядком байтов от младшего к старшему) а MIPS (с порядком байтов от старшего к младшему) 32bit Debian mipsel
64-битный MIPS (с порядком байтов от младшего к старшему)
Образы Entware-3
mipsel-installer.tar.gz
Образы от http://ndm.zyxmon.org/ Debian
Официальные образы Debian

Перенос на MIPS в действительности является двумя разными переносами — debian-mips и debian-mipsel. Они различаются порядком байтов двоичных файлов. Процессоры MIPS могут работать в обоих режимах порядка байтов, но поскольку это обычно нельзя изменить в программах, нам нужны обе архитектуры. Машины SGI работают в режиме big-endian (от старшего к младшему) (debian-mips), а машины Loongson 3 работают в режиме little-endian (от младшего к старшему) (debian-mipsel). Некоторые платы (такие как Broadcom BCM91250A evaluation board (известная также как SWARM)) могут работать в обоих режимах, режим выбирается переключателем на плате. На некоторых машинах на основе Cavium Octeon можно переключать режимы с помощью загрузчика.

Учитывая, что большинство машин на архитектуре MIPS имеют 64-битные ЦП, перенос debian-mips64el в настоящее время находится в стадии активной разработки и возможно будет выпущен в составе Debian GNU/Linux 9.

После того как скачали исходник нужно на флешке или диске в разделе Ext2 или Ext3 4 в зависимости что вы сделали создать паку install и скопировать в нее debian-buster-10_3-mipsel.tar.gz

Как это сделать заходим в веб интерфейс keenetica
Раздел Управления Приложения находим FTP включаем а так же настраивает доступ для пользователя.
Создаем папку install на разделе ext и загружаем в эту папку debian-buster-10_3-mipsel.tar.gz
Переходим в раздел OPKG выбираем наш ext раздел и сохраняем

Наберитесь терпения: роутер «уйдёт в себя» на время до полутора минут. В это время будет вестись распаковка архива с флешки. Каждый следующий запуск среды будет происходить практически мгновенно. Признаком того, что всё прошло нормально будут следующие события в системном логе:

[W] Apr 16 14:12:48 kernel: scsi 0:0:0:0: Direct-Access WDC WD32 00BPVT-22ZEST0 3202 PQ: 0 ANSI: 6
[W] Apr 16 14:12:48 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
[W] Apr 16 14:12:48 kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[W] Apr 16 14:12:48 kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 16 14:12:48 kernel: sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
[W] Apr 16 14:12:48 kernel: sd 0:0:0:0: [sda] Disabling FUA
Apr 16 14:12:48 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Apr 16 14:12:48 kernel: sda: sda1 sda2 sda3
[W] Apr 16 14:12:48 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
[W] Apr 16 14:12:48 ndm: FileSystem::Ext: «/dev/sda» has an unknown partition type, ignored.
Apr 16 14:12:48 ndm: FileSystem::Ext: ext4 «33b88ddc-dd13-d601-3098-8cdcdd13d601:»: filesystem initialized.
Apr 16 14:12:48 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Apr 16 14:12:48 ndm: FileSystem::Repository: «33b88ddc-dd13-d601-3098-8cdcdd13d601:» registered.
[E] Apr 16 14:12:48 ndm: Cifs::ServerTsmb: share record «OS» already exists.
[W] Apr 16 14:12:48 ndm: Cifs::ServerTsmb: failed to automount «33b88ddc-dd13-d601-3098-8cdcdd13d601:», ignored.
Apr 16 14:12:48 kernel: EXT4-fs (sda1): re-mounted. Opts: (null)
Apr 16 14:12:48 ndm: Opkg::Manager: /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601 mounted to /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601.
Apr 16 14:12:48 ndm: Opkg::Manager: /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601 mounted to /opt/.
Apr 16 14:12:48 ndm: Opkg::Manager: /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601 initialized.
[E] Apr 16 14:12:48 ndm: Opkg::Manager: invalid initrc «/opt/etc/initrc»: no such file or directory, trying /opt/etc/init.d/.
[I] Apr 16 14:12:48 ndm: FileSystem::Ext: swap «00000000-0000-0000-0000-000000000000:»: filesystem initialized.
[W] Apr 16 14:12:48 kernel: Truncating oversized swap area, only using 2097152k out of 5119996k
[I] Apr 16 14:12:48 kernel: Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[I] Apr 16 14:12:48 ndm: FileSystem::Repository: «00000000-0000-0000-0000-000000000000:» registered.
[I] Apr 16 14:12:48 ndm: FileSystem::Ext: ntfs «F2BE3458BE341815:»: filesystem initialized.
[I] Apr 16 14:12:48 kernel: tntfs info (device sda3, pid 12038): ntfs_fill_super(): fail_safe is enabled.
[I] Apr 16 14:12:48 kernel: tntfs info (device sda3, pid 12038): load_system_files(): NTFS volume version 3.1 (cluster_size 4096, PAGE_SIZE 4096).
[I] Apr 16 14:12:48 ndm: FileSystem::Repository: «F2BE3458BE341815:» registered.
[E] Apr 16 14:14:42 ndm: Access::Manager: «» directory not found.
[I] Apr 16 14:14:59 ndm: FileSystem::Repository: «OS:/install» created.
[I] Apr 16 14:15:19 ndm: lib::libndmCore: file «OS:/install/debian-buster-10_3-mipsel.tar.gz» was uploaded.
[I] Apr 16 14:15:26 ndm: Core::ConfigurationSaver: saving configuration…
[I] Apr 16 14:15:29 ndm: Core::ConfigurationSaver: configuration saved.
[I] Apr 16 14:16:00 ndm: Opkg::Manager: unmount existing /opt disk: os:/.
[I] Apr 16 14:16:00 ndm: Opkg::Manager: disk unmounted.
[I] Apr 16 14:16:00 ndm: Opkg::Manager: disk is set to: OS:/.
[I] Apr 16 14:16:00 kernel: EXT4-fs (sda1): re-mounted. Opts: (null)
[I] Apr 16 14:16:00 ndm: Opkg::Manager: /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601 mounted to /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601.
[I] Apr 16 14:16:00 ndm: Opkg::Manager: /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601 mounted to /opt/.
[I] Apr 16 14:16:00 npkg: inflating «debian-buster-10_3-mipsel.tar.gz».
[I] Apr 16 14:16:12 ndm: Opkg::Manager: /tmp/mnt/33b88ddc-dd13-d601-3098-8cdcdd13d601 initialized.
[I] Apr 16 14:16:12 ndm: Opkg::Manager: init script reset to default: /opt/etc/initrc.
[I] Apr 16 14:16:12 ndm: Core::ConfigurationSaver: saving configuration…
[I] Apr 16 11:16:13 0: Starting Debian services…
[I] Apr 16 14:16:13 ndm: Opkg::Manager: /opt/etc/initrc: Starting OpenBSD Secure Shell server: sshd.
[I] Apr 16 14:16:13 ndm: Opkg::Manager: /opt/etc/initrc: Done.
[I] Apr 16 11:16:13 sshd[12586]: Server listening on 0.0.0.0 port 222.
[I] Apr 16 11:16:13 sshd[12586]: Server listening on :: port 222.
[I] Apr 16 14:16:16 ndm: Core::ConfigurationSaver: configuration saved.

Использование

Подключитесь с помощью SSH-клиента к роутеру:

хост: my.keenetic.net, IP
порт: 222
имя пользователя: root,
пароль: debian.
Перед вами user space среда Debian, использование которой ограничено лишь вашей фантазией и здравым смыслом. Вам доступны десятки тысяч пакетов репозитория и решения одного из самых крупных linux-комьюнити.

На устройствах с 64МБ RAM рекомендуется в веб-интерфейсе включить Swap-файл.

Технические детали

При SSH-логине вы попадаете в chroot-среду, подготовленную по этому алгоритму. За пределами chroot-среды на роутере лишь busybox и скрипт /opt/etc/initrc, который запускает сервисы Debian при старте роутера и грациозно завершает их работу при перезагрузке иили отмонтировании носителя:

[I] Jul 19 10:28:36 root: Stopping Debian services…
[I] Jul 19 10:28:36 sshd[448]: Received signal 15; terminating.
[I] Jul 19 13:28:36 ndm: Opkg::Manager: /opt/etc/initrc: Stopping OpenBSD Secure Shell server: sshd.
[I] Jul 19 13:28:36 ndm: Opkg::Manager: /opt/etc/initrc: Done.
[I] Jul 19 13:28:36 ndm: Opkg::Manager: disk unmounted.
В chroot-среде вы найдёте файл /chroot-services.list, в котором по одному на строчку перечислены те Debian-сервисы, что должны запускаться при старте роутера. Изначально там только ssh. Строчки в этом файле соответствуют именам стартовых скриптов из /etc/init.d.

apt-get update — загрузка списков пакетов из репозиториев и «обновление» их
apt-get upgrade — обновляет пакеты, которые уже установлены в системе и доставляет новые пакеты-зависимости
Установка утилит
apt-get install mc nano htop wget

Для команд перезагрузки
apt-get install initscripts molly-guard klibc-utils molly-guard runit-init systemd-sysv sysvinit-core

systemctl reboot или shutdown -r now (/sbin/shutdown -r)

Правим репозиторий
nano /etc/apt/sources.list
Более подробно ru SourcesList

Еще вариант установки сразу двух систем

Речь об универсальном установщике, с помощью которого можно поставить среду Debian (возможен выбор дистрибутива stable(или jessie), oldstable (wheezy), testing (stretch), unstable (sid)) прямо в Entware. Поддерживаются все архитектуры, имеющиеся в Entware-3x (armv5, armv7, mipsel, mips, x64)
[Entware-3x] Устанавливаем Debian (chroot среду) по выбору и используем совместно с Entware

[Entware-3x] Устанавливаем Debian (chroot среду) по выбору и используем совместно с Entware

Полная установка entware-3x совместно с Debian 8, и настройка всей системы

Источник

Из за того, что я подключился к 100M/С тарифу интернета, белый zyxel zyxel keenetic не умеет качать торренты (хотя на корпусе крупными буквами написано, что это торрентокачалка) и от показал признаки деградации (намертво отвалился интернет из-за перегрева, пришлось пришлось приклеивать алюминивый радиатор поверх маленькой керамической пластины).
Фото zyxel keenetic предыдущего поколения с рекламой не работоспособной торентокачалки.

Служба поддержки по этому поводу ничего путного предложить не может и вместо признания обмана, она советует производить вечное форматирование накопителя в ext2 или ext3, что приводит к удалению закаченных торентов и помогает только на два дня:)

Поэтому, порывшись в интернете, я купил маршрутизатор с самым мощным MCU на лето 2014 года.
Это оказался Zyxel keenetic giga 2. У него плата плата таже самая, что и у Zyxel NBG4615 v2 (FCC ID: I88NBG4615V2). На обоих платах написано: «»11340Y20NB0ZY02B1», только у Zyxel NBG4615 v2 памяти в два раза меньше.

В результате опять разочаровался в покупке: хотя этот маршрутизатор не зависает при закачке торентов, но у него есть восемь существенных проблем.

1. Очень медленный wifi. При поднесении вплотную к адаптору wifi, он выдает только 55M/С. Служба поддержки как в предыдущий раз не признает проблем, а советует только обновить прошивку до бета версии, что не помогло.
2. Нет встроенной команды для обслуживания usb накопителя. Поэтому для обслуживания диска, его надо снимать с маршрутизатора для проверки на компьютере, что проблематично из-за монтажа маршрутизатора в малодоступном месте. Установка своих приложений там не предусмотрена. Поэтому придется мучаться. Это несмотря на то, что там 16Mбайт flash, на которую, однозначно, поместились стандартные
dosfsck (23k), mkdosfs (12k), dosfslabel (22k), ntfs-3g-utils (180k), e2fsprogs (290k), resize2fs (20k), tune2fs (95k), cfdisk (30k). Что вместе составляет смешные 630k. Но зато поывашет удобство пользования.
3. Поддержка не признающая свой обман покупателя, но предлагающая проводить бесконечное обновление прошивки.
4. Нет простейшего шейпера или QOS. Поэтому я не могу распределять нагрузку между компьютерами. Это несмотря на шестиядерный MCU.
5. Запрограммированный отказ через 2 года, когда кончится гарантия. Радиатор на MCU идентичен маленькому радиатору на белом keenetic. Да еще наклеен криво, возможно даже с толстым слоем клея, не позволяющем хорошо отводить тепло. Это при том, что маршрутизатор чаще всего располагают рядом с потолком, где собирается самый горячий воздух летом. Поэтому, этот блок, однозначно прослужит не больше 2-3 лет без наклейки собственного радиатора. А наклейка его приведет к лишению гарантии и/или порче внешнего вида.
6. Файрвол не умеет фильтровать по url. Эта функция была в белом кинетике, теперь ее нет. Они предлагают воспользоваться dns серверами, умеюoими фильтровать по url. Поэтому для блокировки всяких *advert* надо подключать yandex.dns.
7. Нет поддержки ExFAT. Поэтому флешки с камер/телефонов больше 32гигабайт читать не будет.
8. Низкое качество изготовления. Криво припяны провода от антен (есть вероятность, что антенны wifi не будут припаяны к плате, как это у меня было с «халявным» Sagemcom f@st 2804 v.7 rev 1) и косо сидят радиаторы на двух микросхемах.

Поэтому покупать роутеры zyxel не рекомендуется, пока они не докажут:
-достаточность теплоотвода от микросхем для десяти лет работы при температуре в 35 градусов;
-он умеет форматировать, дефрагментировать и исправлять логические ошибки на usb накопителях всех распространенных форматов;
-есть все сетевые функции, доступные даже на более дешевых маршрутизаторах.

На слово им верить нельзя, ибо они в предыдущие разы обманывали.

Лог загрузки.


U-Boot 1.1.3 (Jan 18 2013 - 20:41:56)


Board: Ralink APSoC DRAM:  256 MB

relocate_code Pointer at: 8ffb0000

flash manufacture id: c2, device id 20 18

find flash: MX25L12805D

============================================ 

Ralink UBoot Version: 4.0.0.2_NDMS

-------------------------------------------- 

ASIC 6856_MP (Port5<->Phy)

DRAM component: 2048 Mbits DDR, width 16

DRAM bus: 16 bit

Total memory: 256 MBytes

Flash component: SPI Flash

Date:Jan 18 2013  Time:20:41:56

============================================ 

icache: sets:512, ways:4, linesz:32 ,total:65536

dcache: sets:256, ways:4, linesz:32 ,total:32768 


 ##### The CPU freq = 700 MHZ #### 

 estimate memory size = 256 Mbytes


======================================

RTL8367RB Giga Switch init

======================================


Please choose the operation: 

   1: Load system code to SDRAM via TFTP. 

   2: Load system code then write to Flash via TFTP. 

   3: Boot system code via Flash (default).

   4: Entr boot command line interface.

   7: Load Boot Loader code then write to Flash via Serial. 

   9: Load Boot Loader code then write to Flash via TFTP. 


   

3: System Boot system code via Flash.

## Booting image at b0050000 ...

   Image Name:   ZyXEL Keenetic Giga II

   Created:      2014-12-09  21:08:57 UTC

   Image Type:   MIPS Linux Kernel Image (lzma compressed)

   Data Size:    1072956 Bytes =  1 MB

   Load Address: 80020000

   Entry Point:  80020000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

No initrd

## Transferring control to Linux (at address 80020000) ...

## Giving linux memsize in MB, 256


Starting kernel ...


Linux version 2.6.22.15 (developers@ndmsystems.com) (gcc version 4.1.2) #1 Tue Nov 25 15:03:52 MSK 2014
ISPRAM0: PA=002a8000,Size=00008000,enabled
Enable SRAM=1c000001
Config7: 0x80080500
Ralink RT6856 SOC prom init
console [early0] enabled
CPU revision is: 00019555
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 65024
Kernel command line: console=ttyS0,57600n8 root=/dev/mtdblock4 rootfstype=squashfs ramdisk=0x1575 load_ramdisk=1 prompt_ramdisk=0 noinitrd es=1
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 1024 (order: 10, 4096 bytes)
CPU frequency 699.00 MHz
Using 250.000 MHz high precision timer.
console handover: boot [early0] -> real [ttyS0]
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256256k/262144k available (2624k kernel code, 5764k reserved, 451k data, 144k init, 0k highmem)
SLUB: Genslabs=17, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Start PCIe register access for RT685x/RT6336x
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Bridge: 0000:00:00.0
  IO window: disabled.
  MEM window: 20000000-200fffff
  PREFETCH window: disabled.
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TC3162 hardware watchdog initialized
TC3162 hardware watchdog module loaded.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
fuse init (API version 7.8)
io scheduler noop registered
io scheduler deadline registered (default)
ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
RAMDISK driver initialized: 1 RAM disks of 5493K size 2048 blocksize
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
L2TP kernel driver, v1.04
PPTP driver version 0.8.5.1
IMQ starting with 2 devices...
IMQ driver loaded successfully.
	Hooking IMQ after NAT on PREROUTING.
	Hooking IMQ before NAT on POSTROUTING.
tc3162: flash device 0x01000000 at 0x10000000
tc3162: Found SPIFLASH 16MiB MX25L12805D
Creating 9 MTD partitions on "tc3162":
0x00000000-0x00030000 : "U-Boot"
0x00030000-0x00040000 : "U-Config"
0x00040000-0x00050000 : "RF-EEPROM"
0x00050000-0x001a0000 : "Kernel"
0x001a0000-0x00ef0000 : "RootFS"
0x00050000-0x00ef0000 : "Firmware"
0x00ef0000-0x00f00000 : "Config"
0x00f00000-0x01000000 : "Storage"
0x00000000-0x01000000 : "Full"
RT3xxx EHCI/OHCI init.
rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1
rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x1fbb0000
rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2
rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x1fba0000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
usbcore: registered new interface driver airprime
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2048 buckets, 16384 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Type NAT: Restricted Cone
ClusterIP Version 0.8 loaded successfully
TCP westwood registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
decoding /dev/mtdblock4...
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 5491KiB [1 disk] into ram disk... done.
Mounting ramdisk...
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 144k freed
init: 136 process exited.
init: can't start a "mtdchk" process (could not execute: no such file or directory).
init: press Enter to activate this console.
[W] Oct 29 00:00:04 ndm: kernel: Linux version 2.6.22.15 (developers@ndmsystems.com) (gcc version 4.1.2) #1 Tue Nov 25 15:03:52 MSK 2014

[I] Oct 29 00:00:04 ndm: kernel: ISPRAM0: PA=002a8000,Size=00008000,enabled

[W] Oct 29 00:00:04 ndm: kernel: Enable SRAM=1c000001

[W] Oct 29 00:00:04 ndm: kernel: Config7: 0x80080500

[W] Oct 29 00:00:04 ndm: kernel: Ralink RT6856 SOC prom init

[I] Oct 29 00:00:04 ndm: kernel: console [early0] enabled

[W] Oct 29 00:00:04 ndm: kernel: CPU revision is: 00019555

[W] Oct 29 00:00:04 ndm: kernel: Determined physical RAM map:

[W] Oct 29 00:00:04 ndm: kernel:  memory: 10000000 @ 00000000 (usable)

[I] Oct 29 00:00:04 ndm: kernel: On node 0 totalpages: 65536

[I] Oct 29 00:00:04 ndm: kernel:   Normal zone: 512 pages used for memmap

[I] Oct 29 00:00:04 ndm: kernel:   Normal zone: 0 pages reserved

[I] Oct 29 00:00:04 ndm: kernel:   Normal zone: 65024 pages, LIFO batch:15

[W] Oct 29 00:00:04 ndm: kernel: Built 1 zonelists.  Total pages: 65024

[W] Oct 29 00:00:04 ndm: kernel: Kernel command line: console=ttyS0,57600n8 root=/dev/mtdblock4 rootfstype=squashfs ramdisk=0x1575 load_ramdisk=1 prompt_ramdisk=0 noinitrd es=1

[W] Oct 29 00:00:04 ndm: kernel: Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.

[W] Oct 29 00:00:04 ndm: kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.

[I] Oct 29 00:00:04 ndm: kernel: Synthesized TLB refill handler (20 instructions).

[I] Oct 29 00:00:04 ndm: kernel: Synthesized TLB load handler fastpath (32 instructions).

[I] Oct 29 00:00:04 ndm: kernel: Synthesized TLB store handler fastpath (32 instructions).

[I] Oct 29 00:00:04 ndm: kernel: Synthesized TLB modify handler fastpath (31 instructions).

[I] Oct 29 00:00:04 ndm: kernel: Cache parity protection disabled

[W] Oct 29 00:00:04 ndm: kernel: PID hash table entries: 1024 (order: 10, 4096 bytes)

[W] Oct 29 00:00:04 ndm: kernel: CPU frequency 699.00 MHz

[W] Oct 29 00:00:04 ndm: kernel: Using 250.000 MHz high precision timer.

[I] Oct 29 00:00:04 ndm: kernel: console handover: boot [early0] -> real [ttyS0]

[W] Oct 29 00:00:04 ndm: kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[W] Oct 29 00:00:04 ndm: kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[I] Oct 29 00:00:04 ndm: kernel: Memory: 256256k/262144k available (2624k kernel code, 5764k reserved, 451k data, 144k init, 0k highmem)

[I] Oct 29 00:00:04 ndm: kernel: SLUB: Genslabs=17, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1

[I] Oct 29 00:00:04 ndm: kernel: Calibrating delay loop... 465.30 BogoMIPS (lpj=2326528)

[W] Oct 29 00:00:04 ndm: kernel: Mount-cache hash table entries: 512

[I] Oct 29 00:00:04 ndm: kernel: NET: Registered protocol family 16

[W] Oct 29 00:00:04 ndm: kernel: Start PCIe register access for RT685x/RT6336x

[W] Oct 29 00:00:04 ndm: kernel: registering PCI controller with io_map_base unset

[W] Oct 29 00:00:04 ndm: kernel: SCSI subsystem initialized

[I] Oct 29 00:00:04 ndm: kernel: usbcore: registered new interface driver usbfs

[I] Oct 29 00:00:04 ndm: kernel: usbcore: registered new interface driver hub

[I] Oct 29 00:00:04 ndm: kernel: usbcore: registered new device driver usb

[I] Oct 29 00:00:04 ndm: kernel: PCI: Bridge: 0000:00:00.0

[I] Oct 29 00:00:04 ndm: kernel:   IO window: disabled.

[I] Oct 29 00:00:05 ndm: kernel:   MEM window: 20000000-200fffff

[I] Oct 29 00:00:05 ndm: kernel:   PREFETCH window: disabled.

[I] Oct 29 00:00:05 ndm: kernel: PCI: Setting latency timer of device 0000:00:00.0 to 64

[I] Oct 29 00:00:05 ndm: kernel: Time: MIPS clocksource has been installed.

[I] Oct 29 00:00:05 ndm: kernel: NET: Registered protocol family 2

[W] Oct 29 00:00:05 ndm: kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[W] Oct 29 00:00:05 ndm: kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)

[W] Oct 29 00:00:05 ndm: kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

[I] Oct 29 00:00:05 ndm: kernel: TCP: Hash tables configured (established 8192 bind 8192)

[I] Oct 29 00:00:05 ndm: kernel: TCP reno registered

[W] Oct 29 00:00:05 ndm: kernel: TC3162 hardware watchdog initialized

[W] Oct 29 00:00:05 ndm: kernel: TC3162 hardware watchdog module loaded.

[I] Oct 29 00:00:05 ndm: kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher

[I] Oct 29 00:00:05 ndm: kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

[I] Oct 29 00:00:05 ndm: kernel: devfs: boot_options: 0x1

[I] Oct 29 00:00:05 ndm: kernel: JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

[W] Oct 29 00:00:05 ndm: kernel: fuse init (API version 7.8)

[I] Oct 29 00:00:05 ndm: kernel: io scheduler noop registered

[I] Oct 29 00:00:05 ndm: kernel: io scheduler deadline registered (default)

[I] Oct 29 00:00:05 ndm: kernel: ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162

[W] Oct 29 00:00:05 ndm: kernel: RAMDISK driver initialized: 1 RAM disks of 5493K size 2048 blocksize

[I] Oct 29 00:00:05 ndm: kernel: loop: module loaded

[I] Oct 29 00:00:05 ndm: kernel: PPP generic driver version 2.4.2

[I] Oct 29 00:00:05 ndm: kernel: PPP Deflate Compression module registered

[I] Oct 29 00:00:05 ndm: kernel: PPP BSD Compression module registered

[I] Oct 29 00:00:05 ndm: kernel: MPPE/MPPC encryption/compression module registered

[I] Oct 29 00:00:05 ndm: kernel: NET: Registered protocol family 24

[I] Oct 29 00:00:05 ndm: kernel: L2TP kernel driver, v1.04

[I] Oct 29 00:00:05 ndm: kernel: PPTP driver version 0.8.5.1

[I] Oct 29 00:00:05 ndm: kernel: IMQ starting with 2 devices...

[I] Oct 29 00:00:05 ndm: kernel: IMQ driver loaded successfully.

[I] Oct 29 00:00:05 ndm: kernel:  Hooking IMQ after NAT on PREROUTING.

[I] Oct 29 00:00:05 ndm: kernel:  Hooking IMQ before NAT on POSTROUTING.

[W] Oct 29 00:00:05 ndm: kernel: tc3162: flash device 0x01000000 at 0x10000000

[I] Oct 29 00:00:05 ndm: kernel: tc3162: Found SPIFLASH 16MiB MX25L12805D

[W] Oct 29 00:00:05 ndm: kernel: Creating 9 MTD partitions on "tc3162":

[W] Oct 29 00:00:05 ndm: kernel: 0x00000000-0x00030000 : "U-Boot"

[W] Oct 29 00:00:05 ndm: kernel: 0x00030000-0x00040000 : "U-Config"

[W] Oct 29 00:00:05 ndm: kernel: 0x00040000-0x00050000 : "RF-EEPROM"

[W] Oct 29 00:00:05 ndm: kernel: 0x00050000-0x001a0000 : "Kernel"

[W] Oct 29 00:00:05 ndm: kernel: 0x001a0000-0x00ef0000 : "RootFS"

[W] Oct 29 00:00:05 ndm: kernel: 0x00050000-0x00ef0000 : "Firmware"

[W] Oct 29 00:00:06 ndm: kernel: 0x00ef0000-0x00f00000 : "Config"

[W] Oct 29 00:00:06 ndm: kernel: 0x00f00000-0x01000000 : "Storage"

[W] Oct 29 00:00:06 ndm: kernel: 0x00000000-0x01000000 : "Full"

[I] Oct 29 00:00:06 ndm: kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver

[W] Oct 29 00:00:06 ndm: kernel: RT3xxx EHCI/OHCI init.

[I] Oct 29 00:00:06 ndm: kernel: rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller

[I] Oct 29 00:00:06 ndm: kernel: rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1

[I] Oct 29 00:00:06 ndm: kernel: rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x1fbb0000

[I] Oct 29 00:00:06 ndm: kernel: rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004

[I] Oct 29 00:00:06 ndm: kernel: usb usb1: configuration #1 chosen from 1 choice

[I] Oct 29 00:00:06 ndm: kernel: hub 1-0:1.0: USB hub found

[I] Oct 29 00:00:06 ndm: kernel: hub 1-0:1.0: 2 ports detected

[I] Oct 29 00:00:06 ndm: kernel: rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller

[I] Oct 29 00:00:06 ndm: kernel: rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2

[I] Oct 29 00:00:06 ndm: kernel: rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x1fba0000

[I] Oct 29 00:00:06 ndm: kernel: usb usb2: configuration #1 chosen from 1 choice

[I] Oct 29 00:00:06 ndm: kernel: hub 2-0:1.0: USB hub found

[I] Oct 29 00:00:06 ndm: kernel: hub 2-0:1.0: 2 ports detected

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver cdc_acm

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver usblp

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver

[I] Oct 29 00:00:06 ndm: kernel: Initializing USB Mass Storage driver...

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver usb-storage

[I] Oct 29 00:00:06 ndm: kernel: USB Mass Storage support registered.

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver usbserial

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver usbserial_generic

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver airprime

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver ftdi_sio

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver option

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303

[I] Oct 29 00:00:06 ndm: kernel: usbcore: registered new interface driver pl2303

[I] Oct 29 00:00:06 ndm: kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver

[W] Oct 29 00:00:06 ndm: kernel: Netfilter messages via NETLINK v0.30.

[W] Oct 29 00:00:06 ndm: kernel: nf_conntrack version 0.5.0 (2048 buckets, 16384 max)

[W] Oct 29 00:00:06 ndm: kernel: ctnetlink v0.93: registering with nfnetlink.

[I] Oct 29 00:00:06 ndm: kernel: IPv4 over IPv4 tunneling driver

[W] Oct 29 00:00:06 ndm: kernel: ip_tables: (C) 2000-2006 Netfilter Core Team

[I] Oct 29 00:00:06 ndm: kernel: Type NAT: Restricted Cone

[W] Oct 29 00:00:06 ndm: kernel: ClusterIP Version 0.8 loaded successfully

[I] Oct 29 00:00:06 ndm: kernel: TCP westwood registered

[I] Oct 29 00:00:06 ndm: kernel: NET: Registered protocol family 1

[I] Oct 29 00:00:06 ndm: kernel: NET: Registered protocol family 10

[I] Oct 29 00:00:06 ndm: kernel: IPv6 over IPv4 tunneling driver

[I] Oct 29 00:00:06 ndm: kernel: NET: Registered protocol family 17

[I] Oct 29 00:00:06 ndm: kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

[I] Oct 29 00:00:06 ndm: kernel: All bugs added by David S. Miller <davem@redhat.com>

[I] Oct 29 00:00:06 ndm: kernel: decoding /dev/mtdblock4...

[W] Oct 29 00:00:06 ndm: kernel: RAMDISK: squashfs filesystem found at block 0

[W] Oct 29 00:00:06 ndm: kernel: RAMDISK: Loading 5491KiB [1 disk] into ram disk... done.

[I] Oct 29 00:00:06 ndm: kernel: Mounting ramdisk...

[W] Oct 29 00:00:06 ndm: kernel: VFS: Mounted root (squashfs filesystem) readonly.

[I] Oct 29 00:00:06 ndm: kernel: Mounted devfs on /dev

[I] Oct 29 00:00:06 ndm: kernel: Freeing unused kernel memory: 144k freed

[I] Oct 29 00:00:06 ndm: Core::Main: ***

[I] Oct 29 00:00:06 ndm: Core::Main: *** Network Device Manager v2.04(AAFS.0)C4.

[I] Oct 29 00:00:06 ndm: Core::Main: *** Built Nov 25 2014 15:01:57.

[I] Oct 29 00:00:06 ndm: Core::Main: ***

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_nat_proto_gre.ko.

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/ip6_queue.ko.

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/fastnat.ko.[0Run Fast NAT.
[W] Oct 29 00:00:08 ndm: Start powerstat module.


[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/ip6t_REJECT.ko.

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/powerstat.ko.

[I] Oct 29 00:00:08 ndm: kernel: Start powerstat module.

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_conntrack_sip.ko.

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/tntfs.ko.

tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
[W]Tuxera NTFS driver 3013.9.29 [Flags: R/W MODULE].
: module license 'Cofast vpn init, v1.01
email ntfs-support@tuxera.com.' taints kernel.

[I] Oct 29 00:00:0nf_conntrack_rtsp v0.6.21 loading
NTFS driver 3013.9.29 [Flags: R/W MODULE].

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tcphr: I/O peripheral driver. (C) 2013, 2014 NDM Systems Inc., v1.2.7
phr: "kng_rb" platform driver loaded
0:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_conntrack_ftp.ko.

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_conntrack_rtsp.ko.

[W] Oct 29 00:00:08 ndm: kernel: nf_conntrack_rtsp v0.6.21 loading

[I] Oct 29 00:00:08 ndm: kernel: net/netfilter/nf_conntrack_rtsp.c: init: port #0: 554

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/phr.ko.

[I] Oct 29 00:00:08 ndm: kernel: phr: I/O peripheral driver. (C) 2013, 2014 NDM Systems Inc., v1.2.7

[I] Oct 29 00:00:08 ndm: kernel: phr: "kng_rb" platform driver loaded

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_conntrack_proto_gre.ko.

[I] Oct 29 00:00:08 ndm: Core::SysTuxera FAT 12/16/32 driver version 3014.4.15 [Flags: R/W MODULE].
] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/tfat.ko.

[I] Oct 29 00:00:08 ndm: kernel: Tuxera FAT ip6_tables: (C) 2000-2006 Netfilter Core Team
ODULE].

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/ip6_tables.ko.

[W] Oct 29 00:00:08 ndm: kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team

[I] Oct 29 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/ext2.ko.

[I] Oct 29 00:00:08 ndmRalink APSoC Ethernet Driver Initilization. v2.1  512 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, weight = 32, Tx Ring = 512, Rx Ring = 512
MAC_ADRH -- : 0x0000107b
SMACCR1 -- : 0x0000107b
MAC_ADRL -- : 0xef566a0c
SMACCR0 -- : 0xef566a0c
[W] OctPROC INIT OK!
Found external switch: Realtek RTL8367RB
hernet Driver Initilization. v2.1  512 rx/tx descriptors allocated, mtu = 1500!

[W] Oct 29 00:00:08 ndm: kernel: NAPI enable, weight = 32, Tx Ring = 512, Rx Ring = 512

[W] Oct 29 00:00:08 ndm: kernel: MAC_ADRH -- : 0x0000107b

[W] Oct 29 00:00:08 ndm: kernetun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
f566a0c

[W] Oct 29 00:00:08 ndm: kernel: SMACCR0 -- : 0xef566a0c

[I] Oct 29 00:00:08 ndm: kernel: PROC INIT OK!

[W] Oct 29 00:00:08 ndm: kernel: Found external switch: Realtek RTL8367RB

[I] Oct 29 00:00:08 ndm: Core::SyTuxera HFS+ driver 3014.1.27 /lib/modules/2.6.22-tc/nf_conntrack_ipv6.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/tun.ko.

[I] Oct 29 00:00:09 ndm: kernel: tun: Universal TUN/TAP device driver, 1.6

[I] Oct 29 00:00:09 ndm: kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/thfsplus.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/resetnds.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_conntrack_pptp.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_nat_pptp.ko.

[I] Oct 29 00:00nf_nat_rtsp v0.6.21 loading
ystem::DriverManager: loading /lib/modules/2.6.22-tc/ext3.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_nat_ftp.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/ip6table_filter.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/ip6t_LOG.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_nat_sip.ko.

[I] Oct 29 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/nf_nat_rtsp.ko.

[I] Oct 29 00:00:09 ndm: kernel: Tuxera HFS+ driver 3014.1.27nf_nat_rtsp v0.6.21 loading

[I] Oct 29 00:00:09 ndm: FileSystem::Temp: mounting /var/...

[I] Oct 29 00:00:09 ndm: FileSystem::Storage: mounting /storage...

[I] Oct 29 00:00:09 ndm: Core::Authenticator: md5 generator created.

[I] Oct 29 00:00:09 ndm: Core::Authenticator: nt generator created.

[I] Oct 29 00:00:09 ndm: Core::Authenticator: generating.

[I] Oct 29 00:00:09 ndm: Core::Authenticator: "readonly" tag registered.

[I] Oct 29 00:00:09 ndm: Core::System::Timezone: building a timezone list...

[I] Oct 29 00:00:09 ndm: Core::System::Timezone: scanning done (273 timezone(s) available).

[I] Oct 29 00:00:09 ndm: Core::System::Timezone: the system timezone is set to "GMT".

[I] Oct 29 00:00:09 ndm: Core::System::Timezone: the system timezone reset to default.

[I] Oct 29 00:00:09 ndm: HTTP::Server: initializing...

[I] Oct 29 00:00:09 ndm: Core::Authenticator: "http" tag registered.

[I] Oct 29 00:00:09 ndm: Dns::Manager: DNS proxy enabled.

[I] Oct 29 00:00:09 ndm: Core::Authenticator: "printers" tag registered.

[I] Oct 29 00:00:09 ndm: Core::Authenticator: "cifs" tag registered.

[I] Oct 29 00:00:09 ndnproxy: ndnproxy 1_0_5 started.

[I] Oct 29 00:00:09 ndnproxy: static entry added: localhost. 127.0.0.1.

[I] Oct 29 00:00:09 ndnproxy: static entry added: my.keenetic.net. 78.47.125.180.

[I] Oct 29 00:00:09 ndnproxy: stats. file: /var/ndnproxymain.stat.

[I] Oct 29 00:00:09 ndm: Core::Authenticator: "ftp" tag registered.

[I] Oct 29 00:00:09 ndm
phy_tx_ring = 0x0ef14000, tx_ring = 0xaef14000

phy_rx_ring0 = 0x0ef16000, rx_ring0 = 0xaef16000
MAC_ADRH -- : 0x0000107b
SMACCR1 -- : 0x0000107b
MAC_ADRL -- : 0xef566a0c
SMACCR0 -- : 0xef566a0c
CDMA_CSG_CFG = 81000000
GDMA1_FWD_CFG = C0010000
[W] Oct 29 00:00:10 ndm: kernel: 

[W] Oct 29 00:00:10 ndm: kernel: phy_tx_ring = 0x0ef14000, tx_ring ra2880stop()...Done
= 0xaef14000

[W] Oct 29 00:00:10 ndm: kernel: 

[W] Oct 29 00:00:10 [32Free TX/RX Ring Memory!
phy_rx_ring0 = 0x0ef16000, rx_ring0 = 0xaef16000

[W] Oct 29 00:00:10 ndm: kernel: MAC_ADRH -- : 0x0000107b

[W] Oct 29 00:00:10 ndm: kernel: SMACCR1 -- : 0x0000107b

[W] Oct 29 00:00:10 ndm: kernel: MAC_ADRL -- : 0xef566a0c

[W] Oct 29 00:00:10 ndm: kernel: SMACCR0 -- : 0xef566a0c

[W] Oct 29 00:00:10 ndm: kernel: CDMA_CSG_CFG = 81000000

[W] Oct 29 00:00:10 ndm: kernel: GDMA1_FWD_CFG = C0010000

[W] Oct 29 00:00:10 ndm: kernel: ra2880stop()...Done

[W] Oct 29 00:00:10 ndm: kernel: Free TX/RX Ring Memory!

[I] Oct 29 00:00:10 ndm: Network::Interface::MAC: backed up the default address 10:7b:ef:56:6a:0c of "Switch0" before changing.

[I] Oct 29 00:00:10 ndm: Network::Interface::Repository: wrapped "eth2" as "Switch".

[I] Oct 29 00:00:10 ndm: Core::Authenticator: "torrent" tag registered.

[I] Oct 29 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/2.6.22-tc/rt5390ap.ko.

[I] Oct 29 00:00:11 ndm: kernel: PCI: Setting latency timer of device 0000:01:00.0 to 64

[I] Oct 29 00:00:11 ndm: Network::Interface::Rtx::WifiMaster: channel bandwidth settings reset to default.

Waiting for Wireless Events from interfaces...
[I] Oct 29 00:00:11 ndnproxy: ndnproxy stopped.

[I] Oct 29 00:00:11 ndnproxy: ndnproxy 1_0_5 started.

[I] Oct 29 00:00:11 ndnproxy: static entry added: localhost. 127.0.0.1.

[I] Oct 29 00:00:11 ndnproxy: static entry added: *. 78.47.125.180.

[I] Oct 29 00:00:11 ndnproxy: stats. file: /var/ndnproxymain.stat.

[I] Oct 29 00:00:13 wmond: ra0: (RT2860) BSS(ra0) channel switched to  1.

[I] Oct 29 00:00:13 wmond: ra0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.

[I] Oct 29 00:00:13 ndm: Network::Interface::Radio: the radio switch state is changed to off, software state is up [WifiMaster0].

[I] Oct 29 00:00:13 ndm: Network::Interface::Repository: wrapped "ra0" as "WifiMaster".

[I] Oct 29 00:00:13 wmond: ra0: (RT2860) STA(00:00:00:00:00:00) disconnects with our wireless client.

[I] Oct 29 00:00:17 wmond: ra0: (RT2860) BSS(ra0) channel switched to  1.

[I] Oct 29 00:00:17 wmond: ra0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.

[I] Oct 29 00:00:17 ndm: Network::Interface::Repository: wrapped "ra0" as "AccessPoint".

[I] Oct 29 00:00:17 ndm: Network::Interface::Repository: wrapped "ra1" as "AccessPoint".

[I] Oct 29 00:00:17 ndm: Network::Interface::Repository: wrapped "ra2" as "AccessPoint".

[I] Oct 29 00:00:17 ndm: Network::Interface::Repository: wrapped "ra3" as "AccessPoint".

[I] Oct 29 00:00:17 ndm: Network::Interface::Repository: wrapped "apcli0" as "WifiStation".

[I] Oct 29 00:00:17 ndm: Module::Manager: 38 modules loaded.

[I] Oct 29 00:00:17 ndm: FileSystem::Proc: system setting saved.

[I] Oct 29 00:00:17 ndm: Syslog: last message repeated 6 times.

[I] Oct 29 00:00:17 ndm: Core::System::Hostname: the host name set.

[I] Dec 10 01:25:15 ndm: Core::System::Clock: system date and time has changed.

[I] Dec 10 05:25:15 ndm: Core::System::Timezone: the system timezone is set to "Asia/Baku".

[I] Dec 10 05:25:15 ndm: Core::System::Domainname: the system domain name set.

[W] Dec 10 05:25:15 ndm: Swap::Manager: pending swap area Новый том:swapfile.

[I] Dec 10 05:25:15 ndm: Ntp::Client: server "0.pool.ntp.org" has been added.

[I] Dec 10 05:25:15 ndm: Ntp::Client: server "1.pool.ntp.org" has been added.

[I] Dec 10 05:25:15 ndm: Ntp::Client: server "2.pool.ntp.org" has been added.

[I] Dec 10 05:25:15 ndm: Ntp::Client: server "3.pool.ntp.org" has been added.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "mr3020" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "iRadio123456" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "usb server" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "kkk" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "dapeng" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "my" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "usb server winstars" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "ralink china dongle" has been created.

[I] Dec 10 05:25:15 ndm: Core::KnownHosts: new host "sony ericsson elm" has been created.

[I] Dec 10 05:25:15 ndm: Command::LogResponse: Applied.

[I] Dec 10 05:25:15 ndm: DynDns::Client: profile "_WEBADMIN" has been created.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access mode enabled.[0
phy_tx_ring = 0x0ebfa000, tx_ring = 0xaebfa000

phy_rx_ring0 = 0x0ebfc000, rx_ring0 = 0xaebfc000
MAC_ADRH -- : 0x0000107b
SMACCR1 -- : 0x0000107b
MAC_ADRL -- : 0xef566a0c
SMACCR0 -- : 0xef566a0c
m
CDMA_CSG_CFG = 81000000
GDMA1_FWD_CFG = C0010000
gResponse: Access vlan identifier saved.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access mode enabled.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access vlan identifier saved.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access mode enabled.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access vlan identifier saved.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access mode enabled.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access vlan identifier saved.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access mode enabled.

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Access vlan identifier saved.

[W] Dec 10 05:25:16 ndm: kernel: 

[W] Dec 10 05:25:16 ndm: kernel: phy_tx_ring = 0x0ebfa000, tx_ring = 0xaebfa000

[W] Dec 10 05:25:16 ndm: kernel: 

[W] Dec 10 05:25:16 ndm: kernel: phy_rx_ring0 = 0x0ebfc000, rx_ring0 = 0xaebfc000

[W] Dec 10 05:25:16 ndm: kernel: MAC_ADRH -- : 0x0000107b

[W] Dec 10 05:25:16 ndm: kernel: SMACCR1 -- : 0x0000107b

[W] Dec 10 05:25:16 ndm: kernel: MAC_ADRL -- : 0xef566a0c

[W] Dec 10 05:25:16 ndm: kernel: SMACCR0 -- : 0xef566a0c

[W] Dec 10 05:25:16 ndm: kernel: CDMA_CSG_CFG = 81000000

[W] Dec 10 05:25:16 ndm: kernel: GDMA1_FWD_CFG = C0010000

[I] Dec 10 05:25:16 ndm: Command::LogResponse: Interface enabled.

[I] Dec 10 05:25:16 ndm: kernel: eth2.1: add 33:33:00:00:00:01 mcast address to master interface

[I] Dec 10 05:25:16 ndm: kernel: eth2.1: add 01:00:5e:00:00:01 mcast address to master interface

[I] Dec 10 05:25:16 ndm: kernel: eth2.1: add 33:33:ff:56:6a:0c mcast address to master interface

[I] Dec 10 05:25:16 ndm: Network::Interface::Repository: created interface Switch0/VLAN1.

[I] Dec 10 05:25:17 ndm: Command::LogResponse: Interface description saved.

[I] Dec 10 05:25:17 ndm: Command::LogResponse: Interface set as private.

[I] Dec 10 05:25:17 ndm: Dhcp::Client: Switch0/VLAN1 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:17 ndm: Dhcp::Client: Switch0/VLAN1 DHCP name servers are enabled.

[I] Dec 10 05:25:17 ndm: Command::LogResponse: Interface enabled.

[I] Dec 10 05:25:17 ndm: kernel: eth2.2: add 33:33:00:00:00:01 mcast address to master interface

[I] Dec 10 05:25:17 ndm: kernel: eth2.2: add 01:00:5e:00:00:01 mcast address to master interface

[I] Dec 10 05:25:17 ndm: kernel: eth2.2: add 33:33:ff:56:6a:0c mcast address to master interface

[I] Dec 10 05:25:17 ndm: Network::Interface::Repository: created interface Switch0/VLAN2.

[I] Dec 10 05:25:18 ndm: kernel: eth2.1: add 33:33:ff:00:00:00 mcast address to master interface

[I] Dec 10 05:25:18 ndm: Command::LogResponse: Interface renamed.

[I] Dec 10 05:25:18 ndm: Command::LogResponse: Interface description saved.

eth2.2: Setting MAC address to 10:7B:EF:56:6A:0D.
device eth2 entered promiscuous mode
VLAN (eth2.2):  Setting underlying device (eth2) to promiscious mode.
[I] Dec 10 05:25:18 ndm: kernel: eth2.2: del 33:33:ff:56:6a:0c mcast address from vlan interface

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: del 33:33:ff:56:6a:0c mcast address from master interface

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: del 01:00:5e:00:00:01 mcast address from vlan interface

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: del 01:00:5e:00:00:01 mcast address from master interface

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: del 33:33:00:00:00:01 mcast address from vlan interface

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: del 33:33:00:00:00:01 mcast address from master interface

[W] Dec 10 05:25:18 ndm: kernel: eth2.2: Setting MAC address to 10:7B:EF:56:6A:0D.

[I] Dec 10 05:25:18 ndm: kernel: device eth2 entered promiscuous mode

[W] Dec 10 05:25:18 ndm: kernel: VLAN (eth2.2):  Setting underlying device (eth2) to promiscious mode.

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: add 01:00:5e:00:00:01 mcast address to master interface

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: add 33:33:00:00:00:01 mcast address to master interface

[I] Dec 10 05:25:18 ndm: kernel: eth2.2: add 33:33:ff:56:6a:0d mcast address to master interface

[I] Dec 10 05:25:18 ndm: Command::LogResponse: Interface set as public.

[I] Dec 10 05:25:18 ndm: Dhcp::Client: Switch0/VLAN2 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:18 ndm: Dhcp::Client: Switch0/VLAN2 DHCP name servers are enabled.

[I] Dec 10 05:25:18 ndm: Command::LogResponse: MTU saved.

[I] Dec 10 05:25:18 ndm: Igmp::Proxy: upstream role assigned to Switch0/VLAN2.

[I] Dec 10 05:25:18 ndm: Command::LogResponse: Name servers provided by the interface network are accepted.

[I] Dec 10 05:25:18 ndm: Command::LogResponse: Interface enabled.

[I] Dec 10 05:25:19 ndm: Command::LogResponse: Country code set.

[I] Dec 10 05:25:19 ndm: Command::LogResponse: Compatibility set.

[I] Dec 10 05:25:19 ndm: Command::LogResponse: Power level applied.

[W] Dec 10 05:25:19 ndm: Network::Interface::Radio: the radio switch is off, "WifiMaster0" is still not active.

[I] Dec 10 05:25:19 ndm: Command::LogResponse: Interface enabled.

[I] Dec 10 05:25:19 ndm: kernel: eth2.2: add 33:33:ff:00:00:00 mcast address to master interface

     [I] Dec 10 05:25:20 ndm: Command::LogResponse: Interface renamed.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: Interface description saved.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: set access-policy: none.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: Interface set as private.

[I] Dec 10 05:25:20 ndm: Network::Interface::Rtx::Wps: "WifiMaster0/AccessPoint0" WPS enabled.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: Pre-shared key saved.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: Wireless encryption enabled.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: WPA2 algorithms enabled.

[I] Dec 10 05:25:20 ndm: Dhcp::Client: WifiMaster0/AccessPoint0 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:20 ndm: Dhcp::Client: WifiMaster0/AccessPoint0 DHCP name servers are enabled.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: SSID saved.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: WMM extensions enabled.

[I] Dec 10 05:25:20 ndm: Command::LogResponse: Interface enabled.

                             [I] Dec 10 05:25:21 ndm: Command::LogResponse: Interface renamed.

[I] Dec 10 05:25:21 ndm: Command::LogResponse: Interface description saved.

[I] Dec 10 05:25:21 ndm: Command::LogResponse: set access-policy: none.

[I] Dec 10 05:25:21 ndm: Command::LogResponse: Interface set as private.

[I] Dec 10 05:25:21 ndm: Command::LogResponse: Network address saved.

[I] Dec 10 05:25:21 ndm: Dhcp::Client: WifiMaster0/AccessPoint1 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:21 ndm: Dhcp::Client: WifiMaster0/AccessPoint1 DHCP name servers are enabled.

[I] Dec 10 05:25:21 ndm: Command::LogResponse: SSID saved.

[I] Dec 10 05:25:21 ndm: Command::LogResponse: WMM extensions enabled.

[I] Dec 10 05:25:21 ndm: Command::LogResponse: Interface disabled.

                            [I] Dec 10 05:25:22 ndm: Command::LogResponse: set access-policy: none.

[I] Dec 10 05:25:22 ndm: Command::LogResponse: Interface set as public.

[I] Dec 10 05:25:22 ndm: Dhcp::Client: WifiMaster0/AccessPoint2 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:22 ndm: Dhcp::Client: WifiMaster0/AccessPoint2 DHCP name servers are enabled.

[I] Dec 10 05:25:22 ndm: Command::LogResponse: Interface disabled.

                            [I] Dec 10 05:25:23 ndm: Command::LogResponse: set access-policy: none.

[I] Dec 10 05:25:23 ndm: Command::LogResponse: Interface set as public.

[I] Dec 10 05:25:23 ndm: Dhcp::Client: WifiMaster0/AccessPoint3 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:23 ndm: Dhcp::Client: WifiMaster0/AccessPoint3 DHCP name servers are enabled.

[I] Dec 10 05:25:23 ndm: Command::LogResponse: Interface disabled.

                            [I] Dec 10 05:25:24 ndm: Command::LogResponse: Interface set as public.

[I] Dec 10 05:25:24 ndm: Command::LogResponse: Wireless encryption disabled.

[I] Dec 10 05:25:24 ndm: Dhcp::Client: started DHCP client on WifiMaster0/WifiStation0.

[I] Dec 10 05:25:24 ndm: Dhcp::Client: WifiMaster0/WifiStation0 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:24 ndm: Dhcp::Client: WifiMaster0/WifiStation0 DHCP name servers are enabled.

[I] Dec 10 05:25:24 ndm: Command::LogResponse: Interface disabled.

[I] Dec 10 05:25:24 ndm: Network::Interface::Repository: created interface Bridge0.

     [I] Dec 10 05:25:25 ndm: Command::LogResponse: Interface renamed.

[I] Dec 10 05:25:25 ndm: Command::LogResponse: Interface description savedeth2.1: dev_sec 1t_promiscuity(master, 1)
device eth2.1 entered promiscuous mode
br0: port 1(eth2.1) entering learning state
 before changidevice ra0 entered 0promiscuous mode
br0: port 2(ra0) entering learning state
ity(master, 1)

[I] Dec 10 05:25:25 ndm: kernel: device eth2.1 entered promiscuous mode

[I] Dec 10 05:25:25 ndm: kernel: br0: port 1(eth2.1) entering learning state

[I] Dec 10 05:25:25 ndm: Command::LogResponse: Interface acquired.

[I] Dec 10 05:25:25 ndm: kernel: device ra0 entered promiscuous mode

[I] Dec 10 05:25:25 ndm: kernel: br0: port 2(ra0) entering learning state

[I] Dec 10 05:25:25 ndm: Command::LogResponse: Interface acquired.

[I] Dec 10 05:25:25 ndm: Command::LogResponse: Interface set as private.

[I] Dec 10 05:25:25 ndm: Command::LogResponse: Network address saved.

[I] Dec 10 05:25:25 ndm: Dhcp::Client: Bridge0 DHCP client DNS host routes are enabled.

[I] Dec 10 05:25:25 ndm: Dhcp::Client: Bridge0 DHCP name servers are enabled.

[I] Dec 10 05:25:25 ndm: Igmp::Proxy: added downstream interface Bridge0.

[I] Dec 10 05:25:25 ndm: Command::LogResponse: Interface enabled.

[I] Dec 10 05:25:25 ndm: Network::Interface::Repository: created interface PPPoE0.

br0: topology change detected, propagating
br0: port 1(eth2.1) entering forwarding state
[I] Dec 10 05:25:26 [32br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
26 ndm: kernel: br0: port 1(eth2.1) entering forwarding state

[I] Dec 10 05:25:26 ndm: kernel: br0: topology change detected, propagating

[I] Dec 10 05:25:26 ndm: kernel: br0: port 2(ra0) entering forwarding state

[I] Dec 10 05:25:26 ndm: Command::LogResponse: Interface description saved.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: IPv6CP disabled.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: LCP echoIGMP proxy with snooping. (C) 2014 NDM Systems Inc., v2.3.2
Command::LogRespoigmpsn v2.3.2 loaded (mode: 00000001)
0m

[I] Dec 10 05:25:26 ndm: Command::LogResponse: Using remote name servers.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: DNS routes enabled.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: CCP disabled.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: Interface set as public.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: Identity saved.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: Password saved.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: PAP authentication enabled.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: TCP-MSS adjustment enabled.

[I] Dec 10 05:25:26 ndm: Network::Interface::PPP: PPPoE0 connection service standby.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: PPP connection enabled.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: Interface enabled.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: pool "_WEBADMIN" has been created.

[I] Dec 10 05:25:26 ndm: Dhcp::Pool: pool "_WEBADMIN" range has been saved.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: pool "_WEBADMIN" bound to interface Home.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: pool "_WEBADMIN" is enabled.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: pool "_WEBADMIN_GUEST_AP" has been created.

[I] Dec 10 05:25:26 ndm: Dhcp::Pool: pool "_WEBADMIN_GUEST_AP" range has been saved.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: pool "_WEBADMIN_GUEST_AP" bound to interface Guesbr0: port 2(ra0) entering disabled state
[0m: Dhcp::Host: host "00:03:7f:12:34:56" IP address has been changed.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: assigned address 192.168.1.33 to host "00:03:7f:12:34:56".

[I] Dec 10 05:25:26 ndm: Dhcp::Host: host "80:3f:5d:04:34:ef" IP address has been changed.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: assigned address 192.168.1.39 to host "80:3f:5d:04:34:ef".

[I] Dec 10 05:25:26 ndm: Dhcp::Host: host "50:e5:49:55:97:bd" IP address has been changed.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: assigned address 192.168.1.45 to host "50:e5:49:55:97:bd".

[I] Dec 10 05:25:26 ndm: Dhcp::Host: host "4c:aa:16:cc:a7:67" IP address has been changed.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: assigned address 192.168.1.43 to host "4c:aa:16:cc:a7:67".

[I] Dec 10 05:25:26 ndm: Dhcp::Host: host "54:e6:fc:95:2e:bd" IP address has been changed.

[I] Dec 10 05:25:26 ndm: Dhcp::Server: assigned address 192.168.1.41 to host "54:e6:fc:95:2e:bd".

[I] Dec 10 05:25:26 ndm: Dhcp::Host: host "00:23:13:12:55:08" IP address has been changed.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: NAT rule added.

[I] Dec 10 05:25:26 ndm: Command::LogResponse: NAT rule added.

[I] Dec 10 05:25:26 ndm: Ip6::Subnets: created subnet "Default".

[I] Dec 10 05:25:26 ndm: Ip6::Subnets: interface "Home" bound to subnet "Default".

[I] Dec 10 05:25:26 ndm: Ip6::Subnets: subnet "Default" enabled as SLAAC.

[I] Dec 10 05:25:26 ndm: Ip6::Subnets: per subnet debug is not implemented.

[I] Dec 10 05:25:26 ndm: Ip6::Prefixes: default ULA prefix enabled.

[I] Dec 10 05:25:26 ndm: Network::Interface::Rtx::Ppe: PPE enabled.

[I] Dec 10 05:25:26 ndm: UPnP::Manager: using LAN interface: Bridge0.

[I] Dec 10 05:25:27 ndm: kernel: IGMP proxy with snooping. (C) 2014 NDM Systems Inc., v2.3.2

[I] Dec 10 05:25:27 ndm: kernel: igmpsn v2.3.2 loaded (mode: 00000001)

[I] Dec 10 05:25:27 ndm: kernel: br0: port 2(ra0) entering disabled state

[W] Dec 10 05:25:26 ndm: Torrent::Client: pending storage usb_zyxel:/.

[I] Dec 10 05:25:26 ndm: Core::Authenticator: password has been changed for user "admin".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: user "admin" tagged with "cli".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: user "admin" tagged with "http".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: user "admin" tagged with "printers".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: user "admin" tagged with "cifs".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: user "admin" tagged with "ftp".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: user "admin" tagged with "torrent".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: user "torrent" has been added.

[I] Dec 10 05:25:26 ndm: Core::Authenticator: password has been changed for user "torrent".

[I] Dec 10 05:25:26 ndm: Core::Authenticator: password has been changed for user "torrent".

[W] Dec 10 05:25:28 ndm: Ntp::Client: unable to communicate with "1.pool.ntp.org".

[W] Dec 10 05:25:28 ndm: Ntp::Client: could not synchronize, waiting...

[I] Dec 10 05:25:28 telnetd: waiting for connections...

[I] Dec 10 05:25:28 ndnproxy: updating configuration...

[I] Dec 10 05:25:28 ndnproxy: static entry added: localhost. 127.0.0.1.

[I] Dec 10 05:25:28 ndnproxy: static entry added: my.keenetic.net. 78.47.125.180.

[I] Dec 10 05:25:28 ndnproxy: stats. file: /var/ndnproxymain.stat.

[I] Dec 10 05:25:28 radvd[230]: version 1.14 started

[I] Dec 10 05:25:29 ndhcps: ndm dhcp server (version 2.7.7) started.

br0: port 2(ra0) entering learning state
[I] Dec 10 05:25:30 ndm: kernel: br0: port 2(ra0) entering learning state

[I] Dec 10 05:25:30 wmond: WifiMaster0/AccessPoint0: (RT2860) BSS(ra0) channel switched to  1.

[I] Dec 10 05:25:30 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.

NQND: server is ready
[I] Dec 10 05:25:30 ndm: Core::Server: started a new session.

[I] Dec 10 05:25:30 ndm: Core::Server: started a new session.

[W] Dec 10 05:25:30 ndm: Core::Session: client disconnected.

[I] Dec 10 05:25:30 ag: HTTP::ServerApp: ready.

br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
[I] Dec 10 05:25:31 ndm: kernel: br0: topology change detected, propagating

[I] Dec 10 05:25:31 ndm: kernel: br0: port 2(ra0) entering forwarding state

[I] Dec 10 05:25:35 [32br0: port 2(ra0) entering disabled state
(RT2860) STA(00:00:00:00:00:00) disconnects with our wireless client.

[I] Dec 10 05:25:35 ndm: kernel: br0: port 2(ra0) entering disabled state

br0: port 2(ra0) entering learning state
[I] Dec 10 05:25:38 ndm: kernel: br0: port 2(ra0) entering learning state

[I] Dec 10 05:25:38 wmond: WifiMaster0/AccessPoint0: (RT2860) BSS(ra0) channel switched to  1.

[I] Dec 10 05:25:38 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(00:00:00:00:00:00) connects with our wireless client.

br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
[I] Dec 10 05:25:39 ndm: kernel: br0: topology change detected, propagating

[I] Dec 10 05:25:39 ndm: kernel: br0: port 2(ra0) entering forwarding state

[W] Dec 10 05:25:40 ndm: Ntp::Client: unable to communicate with "2.pool.ntp.org".

[W] Dec 10 05:25:40 ndm: Ntp::Client: could not synchronize, waiting...

NQCS: server is ready
[I] Dec 10 05:25:42 ndm: Cifs::ServerNQ: service started.


init: [sh]: using "/dev/ttyS0" console device.
[I] Dec 10 05:25:44 ndm: Core::Server: started a new session.

[I] Dec 10 05:25:44 ndm: Core::Authenticator: generating.

Login: 

Password: [W] Dec 10 05:25:52 ndm: Ntp::Client: unable to communicate with "3.pool.ntp.org".

[W] Dec 10 05:25:52 ndm: Ntp::Client: could not synchronize, waiting...



[E] Dec 10 05:25:54 ndm: [1;31mCore::Authenticator: missing a user name.

Login: 

Password: [W] Dec 10 05:26:04 ndm: Ntp::Client: unable to communicate with "0.pool.ntp.org".

[W] Dec 10 05:26:04 ndm: Ntp::Client: could not synchronize, waiting...



[E] Dec 10 05:26:13 ndm: [1;31mCore::Authenticator: missing a user name.

Login: 

Password: 

[E] Dec 10 05:26:23 ndm: [1;31mCore::Authenticator: missing a user name.

[I] Dec 10 05:26:24 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(54:e6:fc:95:2e:bd) had associated successfully.

init: 304 process exited.
init: press Enter to activate this console.
[W] Dec 10 05:26:25 ndm: Core::Session: client disconnected.

[I] Dec 10 05:26:25 wmond: WifiMaster0/AccessPoint0: (RT2860) STA(54:e6:fc:95:2e:bd) set key done in WPA2/WPA2PSK.

[I] Dec 10 05:26:29 ndhcps: _WEBADMIN: get request with vendor identifier MSFT 5.0.

[I] Dec 10 05:26:29 ndhcps: _WEBADMIN: DHCPDISCOVER received from 54:e6:fc:95:2e:bd.

[I] Dec 10 05:26:29 ndhcps: _WEBADMIN: sending OFFER of 192.168.1.41 to 54:e6:fc:95:2e:bd.

[I] Dec 10 05:26:29 ndhcps: _WEBADMIN: get request with vendor identifier MSFT 5.0.

[I] Dec 10 05:26:29 ndhcps: _WEBADMIN: DHCPREQUEST received for 192.168.1.41 from 54:e6:fc:95:2e:bd.

[I] Dec 10 05:26:29 ndhcps: _WEBADMIN: sending ACK of 192.168.1.41 to 54:e6:fc:95:2e:bd.


init: [sh]: using "/dev/ttyS0" console device.
[I] Dec 10 05:26:33 ndm: Core::Server: started a new session.

[I] Dec 10 05:26:33 ndm: Core::Authenticator: generating.

Login: 

Password: 

[I] Dec 10 05:28:39 ndm: Core::Authenticator: generating.

[I] Dec 10 05:28:39 ndm: Core::Authenticator: user "admin" authenticated, realm "ZyXEL Keenetic Giga II", tag "cli".

(config)> 

           system - maintenance functions
              ntp - configure NTP
            known - manage lists of known network objects
      access-list - configure network access lists
  isolate-private - configure if traffic may pass between "private" interfaces
           dyndns - configure DynDns profiles
        interface - network interface configuration
               ip - configure IP parameters
           telnet - manage Telnet server service
            pppoe - configure PPPoE parameters
             ipv6 - configure IPv6 parameters
          kabinet - configure kabinet authenticator
              ppe - enable Packet Processing Engine
             upnp - configure UPnP parameters
          torrent - configure BitTorrent parameters
            udpxy - configure udpxy
             user - configure user account
          service - manage services
              ftp - manage FTP server service
             cifs - manage CIFS service
             dlna - manage DLNA service
        dns-proxy - manage DNS Proxy service
           whoami - display info about the current management session
          printer - printer configuration
             more - view text file
               ls - list directory contents
             copy - copy files
            erase - erase file or empty directory
          monitor - manage monitor services
             show - display various diagnostic information
            tools - tools for testing the environment
       easyconfig - configure Easyconfig services
       components - manage firmware components

(config)>

Какие есть микросхемы.

назначение	Производитель	тип	Корпус	Особенности
RAM	Winbond	w972gg6jb-25	WBGA84	256MБайт DDR2/800 (5-5-5)
ROM	MXIC	mx25l12835fmi-106	SOP-16L	16МБайт SPI
wifi	Ralink/Mediatek	RT5392L
MPU	Ralink/Mediatek	Скрыт под радиатором, предположительно RT6856		700MHz, 6 потоков
???	Ralink/Mediatek	Скрыт радиатором, предположительно RTL8367RB	LQFP128 EPAD
PWM	fitipower integrated technology lnc.	FR9886D	sop-8	Выход 2A

Источник