Kess v2 ошибка wake up error

Чип-тюнинг коммерческой техники Кама3, ГАЗ от SMS-Soft

1. 5th November, 2019, 09:32 PM

   
   

   #1

   Kess v2 5.017 wake up error need help or advice
   

   Hello everyone,i have red pcb kess v2 5.017 china clone,it worked well for few years on all ecus,did not had any problems,but past weeks i tryed on some ecus on VAG cars,for example vw edc17cp14 or audi edc16cp34 can’t event make id no matter what i try,no matter or i choose kline(min or max speed) or CAN, first it says unknown ecu and than wake up error,but previausly it worked good with these same cars or/and ecus,looks like it sometimes work sometimes not,can someone help me to try figure out how to solve this problem?I tryed sw 2.23 and 2.47,different usb ports,reinstaled drivers and still the same.Maybe make new sd card or format existing sd card?I tryed to lift and clean sd card slot pins on pcb,but it did not help.Different tools like fgtech or mpps get id,read or write from the first time smoothly on same cars.

   Last edited by arejas; 5th November, 2019 at 09:43 PM.

   ---

2. 6th November, 2019, 05:49 PM

   
   

   #2

   
   

   Originally Posted by arejas
   

   Hello everyone,i have red pcb kess v2 5.017 china clone,it worked well for few years on all ecus,did not had any problems,but past weeks i tryed on some ecus on VAG cars,for example vw edc17cp14 or audi edc16cp34 can�t event make id no matter what i try,no matter or i choose kline(min or max speed) or CAN, first it says unknown ecu and than wake up error,but previausly it worked good with these same cars or/and ecus,looks like it sometimes work sometimes not,can someone help me to try figure out how to solve this problem?I tryed sw 2.23 and 2.47,different usb ports,reinstaled drivers and still the same.Maybe make new sd card or format existing sd card?I tryed to lift and clean sd card slot pins on pcb,but it did not help.Different tools like fgtech or mpps get id,read or write from the first time smoothly on same cars.

   Buy a new brand quality micro sd (2-4gb) and do this….https://www.digital-kaos.co.uk/forums/showthread.php/713605-Kess-5-017-how-to-read-SD-card-or-create-a-new-SD-card?p=3645247&viewfull=1#post3645247https://www.digital-kaos.co.uk/forum…-a-new-SD-card

   ---

3. The Following 2 Users Say Thank You to gas43 For This Useful Post:

   arejas (9th November, 2019), chentron (6th November, 2019)

   ---

4. 6th November, 2019, 07:15 PM

   
   

   #3

   
   

   Originally Posted by arejas
   

   Hello everyone,i have red pcb kess v2 5.017 china clone,it worked well for few years on all ecus,did not had any problems,but past weeks i tryed on some ecus on VAG cars,for example vw edc17cp14 or audi edc16cp34 can�t event make id no matter what i try,no matter or i choose kline(min or max speed) or CAN, first it says unknown ecu and than wake up error,but previausly it worked good with these same cars or/and ecus,looks like it sometimes work sometimes not,can someone help me to try figure out how to solve this problem?I tryed sw 2.23 and 2.47,different usb ports,reinstaled drivers and still the same.Maybe make new sd card or format existing sd card?I tryed to lift and clean sd card slot pins on pcb,but it did not help.Different tools like fgtech or mpps get id,read or write from the first time smoothly on same cars.

   replace DLLs and test

   ---

5. 7th November, 2019, 04:20 AM

   
   

   #4

   
   

   I had same problem no id, «warning unknown ecu». But only on vag cars. Try to read even if error appears.

   ---

6. 7th November, 2019, 05:41 PM

   
   

   #5

   
   

   So maybe first i try replace sd card and than dlls and see how it goes,thank you!

   ---

7. 7th November, 2019, 05:57 PM

   
   

   #6

   
   

   Originally Posted by arejas
   

   So maybe first i try replace sd card and than dlls and see how it goes,thank you!

   start with the most basic DLL and try

   ---

8. 9th November, 2019, 10:24 AM

   
   

   #7

   
   

   Thanks for everybody,DLL’s did not help,but new premium SD Card solved wakeup error issue and gave more speed for making tasks for kess,tool working again with no wakeup error,!

   So if some VAG or other ecus gives you wake up error or just randomly work/not work

   1. Try re-copy-paste «fresh» DLL files to ksuite folder/DLL
   2. Open your kess main unit and remove old sd card,lift sdcard slot pins and clean slot and sd card contacts with alchogol and make sure sd card slot soldered well to PCB
   3. Buy new premium brand sd card and make new kess files for your sd card,use forum search for tutorials in the forum. Very easy to do.
   If this didn’t help,need to rework PCB or buy new tool.

   Last edited by arejas; 9th November, 2019 at 10:34 AM.

   ---

9. 9th November, 2019, 02:18 PM

   
   

   #8

   
   

   You could do a small tutorial, as you solved the issue, in relation to the premium SD card and file copy.

   ---

10. 9th November, 2019, 02:36 PM

    
    

    #9

    
    

    The KESS Clone only works on older kind of cars and ecu’s.
    from 2009 and up the kess doesnt work.
    You can try all you want but wont work.

    Buy real tuning tools like CMD, BDM, ,magic motorsports

    ---

11. 9th November, 2019, 02:48 PM

    
    

    #10

    
    

    Originally Posted by RBTuning
    

    The KESS Clone only works on older kind of cars and ecu’s.
    from 2009 and up the kess doesnt work.
    You can try all you want but wont work.

    Buy real tuning tools like CMD, BDM, ,magic motorsports

    I have occupied KESS 2.47 RED PCB FW 7.020 in vehicles until 2014 for example the last one was a HYUNDAI NEW H1 with ecu DELPHI DCM3.7AP without any problem.

    ---

12. The Following User Says Thank You to systemlinux For This Useful Post:

    gas43 (9th November, 2019)

    ---

13. 9th November, 2019, 06:35 PM

    
    

    #11

    
    

    Originally Posted by RBTuning
    The KESS Clone only works on older kind of cars and ecu’s.
    from 2009 and up the kess doesnt work.
    You can try all you want but wont work.

    Buy real tuning tools like CMD, BDM, ,magic motorsports

    I can not say that you are not right,but i know few people who have kess v2 clone and it works good with all protocols,even on cars till 2017,it all depends of the car and what type of ecu it uses.
    I can say it can make 99% of cars wich we see on the roads

    Last edited by arejas; 9th November, 2019 at 06:38 PM.

    ---

14. 9th November, 2019, 06:41 PM

    
    

    #12

    
    

    Originally Posted by systemlinux
    

    You could do a small tutorial, as you solved the issue, in relation to the premium SD card and file copy.

    I did small tutorial,and for new sd card i used «gas43» user provided links on top of this thread,so i don’t need to double post it.

    ---

15. The Following User Says Thank You to arejas For This Useful Post:

    gas43 (9th November, 2019)

    ---

16. 19th November, 2019, 01:11 PM

    
    

    #13

    
    

    Update:
    After 1 week of usage,on audi q7 2007 yr 3.0tdi 155kw edc17cp04,identical same problem again(can’t make id),now even on edc16 ID does not work anymore,even it worked perfect for one week with new sdcard and new files.
    Don’t think that sd card failed again.
    Anyone can recommend good reable kess/ktag rework seller?

    Last edited by arejas; 19th November, 2019 at 01:48 PM.

    ---

17. 19th November, 2019, 02:37 PM

    
    

    #14

    
    

    Try one more time to create the micro sd….
    Are you sure that your micro sd is quality?

    ---

18. 19th November, 2019, 02:57 PM

    
    

    #15

    
    

    Originally Posted by gas43
    

    Try one more time to create the micro sd….
    Are you sure that your micro sd is quality?

    I will try to make new files on same SDcard and test,see if it helps.
    My sd card is Verbatim Premium SDHC 16GB Class 10,read speed up to 80MB/s ,Water,Shock and Temperature resistant.

    Last edited by arejas; 19th November, 2019 at 11:02 PM.

    ---