Lsadrv touch sensor error как исправить

Страницы: 1 … 3 4 [5] 6 7 … 17

Страницы: 1 … 3 4 [5] 6 7 … 17

помогите скомпилировать драйвер-пожалуйста

проблема есть.. в школах внедряю линукс(Debian). в каждом классе стоит интерактивная доска(этакий тачпад большой).. с софтом в Линуксе большие проблемы.. нашел в инете на каталанском языке : поделку.. сама программа работает, но драйвер к ней был написан под ядро 2.4.х, у меня как вы понимаете 2.6.х драйвер при сборке дает ошибки.. в С я не силен, может кто оказать посильную помощь? доска фирмы Hitachi-StarBoard драйвер тут:http://sttech.orgfree.com/data/lsadrv-bin-2.0.0a.tar.gz

А с сайта Hitachi пробовали скачать?

Ради дебиана и детей — говно вопрос. Сохрани патч в файл patch.diff, скопируй файл в каталог kernel драйвера и наложи его командой patch -p1 -i patch.diff

Пришлось проапдейтить лицензию до GPL, потому что у этих пидаров стояла проприетарная.

Кроме того, твое ядро должно быть сконфигурировано без поддержки CONFIG_NAMESPACES.

За получившийся результат лично я никакой ответственности не несу, ты используешь патч на свой страх и риск. Потому что я это устройство в глаза не видел — портировал логически.

Пруфлинк на школу. Иначе
Тролль.

про троллей.. и тех кто тут пруфлинки рисует..

старооскольская школа.. номер писать не буду.. у нас в УНО высокоинтеллектульных троллей с избытком.. приходиться бороться молча- скрипя зубами.. потому, что там народ очень далек в плане понимания многих вещей.. им надо отчеты и результаты.. а ваши проблемы нужны вам.. что касаеться проблемы драйвера.. уже патч один мне дали.. ядро его проглотило..я имею ввиду модуль.. но пока все не проверю.. утверждать не буду.. что касается фирмы Hitachi и «скачать тут не пробовали», отвечаю.. ПРОБОВАЛИ.. там винда оунли.. это раз.. в официальное представительство было отослано 3 письма на 3х языках.. ответили только испанцы.. вежливо отправив нас в основную фирму.. а там ответ уже неделю идет..идет.. софт кстати нашел только в испании. и то каким то чудом.. там оно есть.. даже релиз.. но старый на убунту 8.04.. это все.. что есть.. .. и отдельное спасибо тем кто помог.. ОГРОМНОЕ просто спасибо.. боюсь еслиб не вы .. не знаю что бы делал.. 🙂

до кучи..

особенно нас порадовал вендор АЛЬТ..который линукс.. вопрос — а вот у нас тут железка не работает.. помогите.. ответ — идите. в того кто ее делал.. не наша проблема.. ..вывод? .. хорошее начинание.. сами же и хоронят.. я про дистрибутив школьный..скромно промолчу.. а то опять троллем назовут.. ..но это не самое главное.. главное то что принудительно-добровольно требуют чтобы все школы, ставили АЛТ.. и отчитывались за то скоко компьютеров на нем стоит.. как вам а? .. это называется внедряем СПО.. а как оно там в школах.. да пофиг.. грустно.. 🙁

StarBoard Hitachi.. опять не могу запустить..

Привет.. модуль подгружается но xorg валиться если его коннектиш как тачпад.. использовал рекомендации из драйвера.. сделал с опцией и без.. мой конфиг: http://sttech.orgfree.com/data/xorg.conf лог файл когда сваливается xorg: http://sttech.orgfree.com/data/Xorg.err.log лог файл когда отключена опция и запускается xorg, но не работает доска:http://sttech.orgfree.com/data/Xorg.0.log последний вариант драйвера:http://sttech.orgfree.com/data/lsadrv-bin-2.0.1.tar.gz .. может кто помочь с этой проблемой? мне еще дали ссылку тут:http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=269860 не думаю что у меня в debian Lenny это есть.. но бог его знает.. плиз хелп.. 🙁

П.С. знал бы что так нужен будет С, учил бы в институте.. знаний явно не хватает.. 🙁

>>Потому что я это устройство в глаза не видел — портировал логически.

Вот это я понимаю либастрал. Небось заглушил весь радиоканал в радиусе десятка километров, пока писал патч. Замолкли птицы, запаниковали домашние животные, на столбах засветились огни святого Эльма.

Источник

I keep getting the error message ‘LSAdrv — Touch Sensor Error USb

Touch sensor error USB (7) Reset the Controller

Posted by jchoy on Sep 25, 2009

1 Answer

Anonymous

An expert who has achieved level 1.

An expert that has 1 follower.

Are you using a USB extension cable? I have found that you can use a 50′ USB extension cable but if you connect 2 of the 50′ extension cables together you receive this error. You can use Cables-to-go SuperBooster USB over CAT5e+. It will allow you to go over 100 feet and it has been tested and approved by Hitachi. This is the solution we used, or you can go wireless

Posted on Jan 11, 2010

Add Your Answer

Tips for a great answer:

• — Answer the question.
• — If you need clarification, ask it in the comment box above.
• — Better answers use proper spelling and grammar.
• — Provide details, support with references or personal experience.

Upload an image from your computer

Draw a box over the problem!!

Attachments: Added items

Complete. Click «Add» to insert your video. Add

Related Questions:

Error 08 11

WHAT IS ERROR E046 CANON SCANNER

Error 08 11

Jen Air Convection oven keeps giving a F3 error code and F1 error code

Brother dcp-117c keeps repeating paper-jam message, even surely does not exist anymore. Anyways to reset the error message, as it prevents the usage of the machine?

Controlpanel flashes f 3

Error message and alarm

These are the fault codes for your unit
Maytag Range / Stove / Oven Fault Codes Failure Code Fault Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information. F2 Oven temperature too hot Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness. F3
or
F4 Shorted or open oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. F5 Watchdog and hardware conflict Replace clock (ERC). F7 Function key shorted or stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F8 Analog / Digital problem Replace clock (ERC). F9 Door latch Check door latch components.
Hope this helps, Please take the time to give this solution a fix ya rating

ITouch stuck and unrecognizable

Sounds like a long shot but it’s the only solution I’ve been able to track down for the oxe8000035 error — try a different iPod USB cable.

Otherwise, it’s a trip to the Apple store.

HP Photosmart C7180

Hi I found this I know your error not in here but it may work for It worth a try nothing to lose and it may work. I know your error code is not in this but it some times it clean the error with this type of error number you can gave it a go try not harm it Error code : 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050.

Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the ‘ Insert Cartridges ‘ message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

F9 Code after power outage — Model JGR8855ADS

Try unplugging the oven from the electrical power. May release the lock, which is held in place by a tiny micro switch. If not and while the electric is still off or the oven is unplugged, use a bright light flashlight to look through the slot where the lock is in the oven, not in the door.

You may be able to use a thin blade screwdriver to move the lock to the release position. Check the angle of the lever. A slightly bent lever handle also can cause this type of condition.

If all else fails, remove the access panel on the front of the oven to access the locking device and release it. May have to disconnect the wires to the lock which will allow door to function but not during any self cleaning modes.

Generic:
Fault Code Interpretation Components To Check
F-1 Communication error between touch pad and ERC (clock)
Replace the touch pad or clock.
F-2 Oven temperature sensed by electronic control Replace the clock/relay board
F-3 Open oven sensor or harness. Replace the oven sensor
F-4 Shorted oven sensor or harness Replace the oven sensor
F-5 Power to element relay disabled in cook mode Replace the clock/relay board
F-7 Shorted touch pad key sensed for 32 secs. Replace the touch pad/control panel
F-8 Shorted meat probe Replace the probe jack.
F-9 Door lock safety circuit on ERC sensed Replace the door latch assembly
F-C or F-0 Communication error between boards Replace the relay board

Maytag-Maycop-Magic Chef-Jennair-Admiral: Oven Fault Codes:
F0 Function key shorted or stuck button Clean and unstick button or replace Touch Pad or Clock
F1 Defective Touch Pad or Membrane Replace Touch Pad or Membrane
F2 Oven over heat defective Relay Board or (if present) or defective Sensor
F3 Oven Sensor Open Replace Sensor
F4 Shorted wire or Sensor locate short and correct it or replace Sensor
F5 Hardware, safety circuits disagree Replace Clock
F6 Missing AC (power) signal Check for proper voltage (plug, breaker, etc.)
F7 Function key shorted or stuck button Clean and unstick button or replace Touch Pad or Clock
F8 A/D Warning Replace Clock
F9 Door Lock Warning Check door lock circuit or Replace Clock

Источник

Technical Support

Do you have a question concerning your Hitachi interactive product? In the first instance, try the Fault Finder tool below or go through the technical Q&A gathering the answers on the most frequent technical questions.

If your don’t find the answer to your question, then please contact our technical support department on [email protected] and we will get back to you as quickly as possible.

Technical Q&A;

I keep getting “LSaDrv Touch Sensor error” message when Starboard is attached.

Check the following items if «LSaDrv Touch Sensor Error» message appears.

1. Check that light is not blocked from reaching the board surface or reflective tape.
2. Check that the reflective tape is not dirty or that any object is inside the reflective area like the Stylus or Pen.

If the problem is not corrected despite making the above checks, perform adjustments as follows;

1. Press the «Adjust Camera» button on the «LSaDrv Touch Sensor Error» dialog box displayed on the PC screen.
2. «Camera Adjustment Wizard Start» window appears. Press «All Adjust» and wait until finish adjustment. (It takes 30 seconds to few minutes to finish.)
3. Once the Finish button has appeared, Press «Finish».

This completes sensor adjustment.

After making adjustments, check that input can be performed normally.
If you are still having the same problem, please contact our Starboard Technical Support Department.

StarBoard software is displaying the message “StarBoard device is not connected”.

1. Click on the “Check Connections” to see if the software will recognize the starboard device.
2. Double-check the connection to make sure all cables are connected securely.
3. Inquire about previously installed device that could be occupying connection. Please check with your IT department on procedures.
4. Verify that the correct driver was selected when initially installed. For the T-series panels, verify that the USB Tablet manager is installed. For the FX-Duo series, verify that the Starboard Light Sensor Driver is installed by checking Add/Remove programs.
5. Early StarBoard EM Panel systems were not encoded with StarBoard identification. The same is true of some early StarBoard BT-1 Systems which were initially intended to be sold as accessories to other StarBoard systems. When the “No StarBoard is Connected” message appears with these systems, simply click ok and the software will startup and the systems will work.

I cannot calibrate my StarBoard device

Why do I get a red X through the LSaDrv icon in my System Tray even though my Starboard is connected?

What is the maximum screen resolution I can set my monitor to and use the Screen Record Function in the Starboard Software?

My annotation keeps disappearing. What could be wrong?

1. Check to see if you have the “Handwriting recognition” program running. You must turn it off to annotate in StarBoard, unless you are adding text to a Text Box.
2. Determine what type of pen is being used. The ink that is left by the Pointer Pen will disappear after the second time you touch the screen.

How can I extend the length of the USB cable?

The icons in my toolbar are too big and are blocking some items on my desktop.

Why does the cursor follow my finger on the Starboard but I can’t write?

After a new Starboard setup or after moving it, why can I not write on the board even though the LSaDrv is loaded correctly in the System Tray?

I like to have my toolbar vertical rather than horizontal.

Can I customize my toolbar?

How do I remove or add a tool in the toolbar?

1. Simply place and hold your cursor on top of the icon you wish to remove. Hold for 2-3 seconds and drag it off the tool bar.
2. To add to the toolbar any function from the cascading menu structure, or electronic inks from the ink palettes, simply hold the pen/cursor over the icon of the function or ink for 2-3 seconds then drag the icon onto the toolbar.

How can I open a PowerPoint file inside the StarBoard software?

1. You can open a PowerPoint file either as a live document or as a set of captured images that are easily paged through and annotated upon.
2. Go to the StarBoard/Documents/Document… Select the Power Point icon. Locate your Power Point file and open. All Office documents can be opened live, EDIT mode, or captured VIEW/BROWSE mode. In the Setting menu you can select whether to always open in EDIT mode, always open in VIEW/BROWSE mode, or select the mode each time you open a file.
3. If you chose the “VIEW/Browse mode” this will tell the StarBoard software to capture the entire slide show for the session. If there are no embedded videos or transitions, this is the easiest way to present PowerPoint slides. You can move through the presentation with forward and back arrows on the StarBoard toolbar. As you deliver the presentation, annotations will automatically be captured.
4. If you choose EDIT mode, the PowerPoint opens live. You page through the presentation with the Pen in PC mode by tapping on the screen, just like any other live PowerPoint presentation. This is the ideal mode for presentations with embedded video or transitions.
5. To make annotations, you can do so over the live application by selecting PEN and an ink. In this mode, they are on a layer above the actual PowerPoint. You must Clear Screen to delete annotations made over live PowerPoint. To move to the next slide select PC mode, the mouse icon, and tap on the screen.
6. If you wish to embed the annotations in the live PowerPoint presentation file, then make the annotations over the live PowerPoint as above, and then under the EDIT menu from the StarBoard button, select Paste into Microsoft Office Document. The annotations are now part of your PowerPoint file.
7. If you wish to save annotations with the slide image but not in the power point file, then before you annotate, click on the CAPTURE button with the pen still in PC or mouse mode. This will take a snapshot of the slide, and place the pen in PEN or annotation mode. You can then annotate on the captured image of the slide and it is automatically saved with annotations. To go back to the live presentation and advance the slides, simply click on the PC Mode/mouse button on the toolbar, and then click on the screen to advance the page.

Why does the Starboard Software appear to be frozen when I am installingreinstalling the Starboard software and the progress bar has not moved in a while.

Who do I contact to get software updates?

1. Send an email to [email protected] . Include the serial number of your device and a valid mailing address.
2. Software updates are available to download from the Secure Support section of the website.

If I have an older StarBoard model, which driver would I select?

How many clients can I have in Conference mode?

Can all the clients in Conference mode see what I’m putting on my computer screen?

1. Yes, it normally takes about 1-2 seconds before the annotation travels to all your clients.
2. Conference mode only displays captured images and annotations on the Client screens in a conference. If you are viewing a document of a drawing from another application, it must be captured to be viewed by others. Once captured, it can be magnified and you can navigate around the captured image with the Navigation Window. PowerPoint presentations can only be viewed in a Conference in VIEW/BROWSE mode.

What display output should the Starboard be connected to on the video card?

How can I use an On-Screen Keyboard on the Starboard Software 9.0 for Mac?

Why does the Starboard software look like jumbled letters and symbols when I download it to my Mac?

Why can’t I zoom in on my documents?

What driver do I install for the PX-Duo Plasma Overlay series?

Why am I getting an error message when trying to install a newer version of the Starboard Software that an «older version of the driver is already installed. Please uninstall the older version before proceeding» and it will not allow me to finish the Starboard Software install?

There are several components to the Starboard Software depending on the devices attached to your computer. When installing for the first time, please make sure to use only the Setup Disk labeled Starboard Software Setup version 8.xx. This disk includes the drivers and software bundled together so there is no need to use the second disk. If 2 disks are used, you may be trying to install the driver twice, thus causing a driver conflict that generates the error message mentioned above.

If you are re-installing the Starboard Software or upgrading to a newer version, please remove all instances of the Starboard Software and its drivers from the Control Panel- Add/Remove Programs and ensure that the following are uninstalled to avoid any driver conflicts or errors. «Starboard Light Sensor Driver», Starboard Software Version 8.X» or lower, and «USB Tablet Manager». This will allow you to install the updated drivers along with the Starboard Software.

I have an FX-63/77/82/77GII Starboard that does not calibrate correctly. It won’t write in the lower left hand corner and top right hand corner. I have tried calibrating many times and I still have the same results. What else can I do?

How can I calibrate correctly when I cannot write in the top right corner or lower left corner?

We have noticed this ot be a problme in some FX-77WD / FX-77GII (the shipment after February 2008). This is partly due to a faulty firmware version that some of these StarBoards may have. Below, you will find the Firmware Changer tool that will allow you to change the Firmware to a recent working version. Please download and extract the folder. Please be sure to read the instructions on how to properly run this tool. Not following the instructions can damage the electronics of the sensor. If you continue to have problmes, please contact your local support office. [email protected]

Источник

Ради дебиана и детей — говно вопрос. Сохрани патч в файл patch.diff,
скопируй файл в каталог kernel драйвера и наложи его командой patch -p1 -i patch.diff

Пришлось проапдейтить лицензию до GPL, потому что у этих пидаров стояла проприетарная.

Кроме того, твое ядро должно быть сконфигурировано без поддержки CONFIG_NAMESPACES.

За получившийся результат лично я никакой ответственности не несу, ты используешь патч на свой страх и риск. Потому что я это устройство в глаза не видел — портировал логически.

diff -uprN kernel/lsadrv-main.c kernel.new/lsadrv-main.c
--- kernel/lsadrv-main.c	2008-08-05 00:08:22.000000000 +0400
+++ kernel.new/lsadrv-main.c	2010-01-24 14:21:46.000000000 +0300
@@ -240,9 +240,6 @@ static int usb_lsadrv_probe(struct usb_i
 		lsadrv_idev->idev->phys = lsadrv_idev->phys_path;
 	}
 	usb_to_input_id(udev, &lsadrv_idev->idev->id);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
-	lsadrv_idev->idev->cdev.dev = &intf->dev;
-#endif
 
 	/* Add it to the device list */
 	down(&device_list_lock);
@@ -310,9 +307,6 @@ static void usb_lsadrv_disconnect(struct
 		lsadrv_idev->idev->id.vendor = 0;
 		lsadrv_idev->idev->id.product = 0;
 		lsadrv_idev->idev->id.version = 0;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
-		lsadrv_idev->idev->cdev.dev = NULL;
-#endif
 	}
 	kfree(xdev);
 
@@ -419,7 +413,7 @@ static void lsadrv_remove_procfs_dir(voi
 		files->devicesFileEntry = NULL;
 	}
 	if (files->lsadrvDirEntry) {
-		remove_proc_entry("lsadrv", proc_root_driver);
+		remove_proc_entry("driver/lsadrv", NULL);
 		files->lsadrvDirEntry = NULL;
 	}
 }
@@ -429,11 +423,10 @@ static void lsadrv_create_procfs_dir(voi
 {
 	struct lsadrv_proc_files *files = &lsadrv_files;
 	/* Make procfs/driver/lsadrv directory */
-	files->lsadrvDirEntry = create_proc_entry("lsadrv", S_IFDIR, proc_root_driver);
+	files->lsadrvDirEntry = create_proc_entry("driver/lsadrv", S_IFDIR, NULL);
 	if (files->lsadrvDirEntry == NULL) {
 		return;
 	}
-	files->lsadrvDirEntry->owner = THIS_MODULE;
 
 	/* procfs/driver/lsadrv/devices file */
 	files->devicesFileEntry = create_proc_entry("devices",
@@ -443,7 +436,6 @@ static void lsadrv_create_procfs_dir(voi
 		lsadrv_remove_procfs_dir();
 		return;
 	}
-	files->devicesFileEntry->owner = THIS_MODULE;
 	files->devicesFileEntry->data = NULL;
 	files->devicesFileEntry->read_proc = lsadrv_read_devices;
 	files->devicesFileEntry->write_proc = NULL;
@@ -462,7 +454,7 @@ MODULE_PARM_DESC(trace, "For debugging p
 
 MODULE_DESCRIPTION("lsadrv touch sensor driver");
 MODULE_AUTHOR("eIT Co. Ltd. & Xiroku Inc.");
-MODULE_LICENSE("Proprietary");
+MODULE_LICENSE("GPL");
 
 static int __init usb_lsadrv_init(void)
 {
diff -uprN kernel/lsadrv-sub.c kernel.new/lsadrv-sub.c
--- kernel/lsadrv-sub.c	2008-08-05 01:59:14.000000000 +0400
+++ kernel.new/lsadrv-sub.c	2010-01-24 14:43:27.000000000 +0300
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/version.h>
 #include <asm/uaccess.h>
+#include <linux/pid.h>

ttnl ★★★★★

(24.01.10 14:59:09 MSK)