Medieval 2 total war encountered an unspecified error and will now exit перевод

The Medieval 2 Total War is a strategy game in which you have to hold settlements, attack other regions, and managing agents. Along with that, there are some great mod packs for this game that can make the overall experience more interesting. However, there are still some issues with glitches in the AI and diplomacy aspect of this game.

Recently, many users reported issues with the game crashing a few seconds after players try to load it. An error message “Medieval 2 Total War Encountered an Unspecified Error and Will Now Exit” will pop up and the game will crash. Here are some solutions that might help you fix this problem.

1. Remove Mods

Just like the majority of other games, faulty mods can create problems for users. So, if you are using mods and keep running into this error then you will need to remove the mods files from your PC. To remove the mods, you need to find the mod folder in your game files and then remove these folders from your PC. However, other players have mentioned that the easiest method to remove the mods would be to reinstall the game on your PC. So, if you have the time, then remove Medieval 2 from your PC and then install it again.

You can also try your luck with file verification from the Steam client before reinstalling the game. There is a slim chance that the verification process will fix the game files and you won’t have to bother with other solutions. Luckily, the verification process only takes a few minutes to complete and it is worth a try if you want to save your time. If the game is not fixed after verifying the game files, then you should go ahead and reinstall it on the PC. Remember to remove the game folder as well after removing the files from your PC.

1. Use Compatibility Mode

If the problem is not fixed by removing the mods from your game, then you should check the compatibility options. To do that, you should access the game folders from the file explorer and then navigate to the Medieval 2 executable file. Right-click on this file and then click on properties to access the pop-up menu. Now, you can switch to the compatibility options and make sure that the program is running in compatibility mode. You can use the Windows 7 compatibility mode and then try launching the game after applying the settings.

Along with that, you need to also check the administrator permissions box to allow the game file to work on your PC. Changing the compatibility options will only take a minute if you know what you’re doing. After allowing the admin privileges, you should launch the game again to see if it works for your game. Hopefully, you won’t be dealing with the unspecified error in Medieval 2 and you can advance your kingdom peacefully without worrying about crashes.

1. Rebuild Game

The last thing that you can try to fix the unspecified error is by rebuilding the game from the Steam client. But before you do that, you will have to disable the security programs like an anti-virus that are operating in the background. Then you can just create a backup of your game folder and remove the folder from the steam game directory.

Now, you need to create another folder with the same name as your Medieval 2 game folder. Launch the Steam client and start the file verification process. The client will download all of the vanilla files back to your PC.

After the rebuilding process is complete, you can launch the game to see if it works. If the game is not crashing at this point, then you need to exit out of the game and then move the game files from the backup folder to the current game folder. Replace the files in the destination and that should update your progress in the game.

You won’t have to deal with unspecified errors anymore and your game should work perfectly after the rebuild process is complete. However, if you need further assistance then you can contact the support team or use community forums to interact with other players.

System rpt error medieval 2 total war

20:18:20.500 [system.rpt] [error] Medieval 2: Total War encountered an unspecified error and will now exit.

I’ve been following the adding new unit tutorial, and I’ve got this message, where or what is a .rpt and where could I be going wrong? :help:

I didn’t check no. I’ve entered this into the battle_models.MODELB:

17 scottish_clansmen 1 4 64 unit_models/_Units/ME_Nubian_Padded/sudanese_tribesmen_lod0.mesh 121 64 unit_models/_Units/ME_Nubian_Padded/sudanese_tribesmen_lod1.mesh 900 64 unit_models/_Units/ME_Nubian_Padded/sudanese_tribesmen_lod2.mesh 2500 64 unit_models/_Units/ME_Nubian_Padded/sudanese_tribesmen_lod3.mesh 6400 2 5 scotland 69 unit_models/_Units/ME_Nubian_Padded/textures/ME_clan_scot.texture 69 unit_models/_Units/ME_Nubian_Padded/textures/ME_Nubian_normal.texture 48 unit_sprites/scot_Scottish_Clansmen_sprite.spr 4 scotland 68 unit_models/_Units/ME_Nubian_Padded/textures/ME_clan_scot.texture 69 unit_models/_Units/ME_Nubian_Padded/textures/ME_Nubian_normal.texture 47 unit_sprites/scot_Scottish_Clansmen_sprite.spr 2 5 scotland 66 unit_models/AttachmentSets/Final Middle Eastern_slave_diff.texture 66 unit_models/AttachmentSets/Final Middle Eastern_slave_norm.texture 0 4 merc 65 unit_models/AttachmentSets/Final Middle Eastern_merc_diff.texture 65 unit_models/AttachmentSets/Final Middle Eastern_merc_norm.texture 0 1 4 None 19 MTW2_Fast_Swordsman 0 2 18 MTW2_Sword_Primary 14 fs_test_shield 0 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002

basicly I tried copying some sudanese tribesman stuff, and replacing some things, but somethings obviously gone wrong

my suggestion would be to try it in a sort of reverse engineering way. follow the tutorial TO THE LETTER. create and add the exact same unit he did the exact same way he did and see if it works.

if it works, then go back and begin to make changes. if it doesn’t then you know you’ve done something wrong and it just becomes a text comparison to find the problem. adding new units is very dfficult and time consuming. it doesn’t take much to crash it.

Источник

System rpt error medieval 2 total war

my game works greatly until i install update 1.2 whe i go to my system log it says this

08:12:52.773 [system.rpt] [always] CPU: SSE2
08:12:52.793 [system.rpt] [always] ==== system log start, build date: Jun 25 2007 version bld-medieval2-update2.1-30 (43169) ===
08:12:52.798 [system.io] [always] mounted pack packs/data_0.pack
08:12:52.799 [system.io] [always] mounted pack packs/data_1.pack
08:12:52.801 [system.io] [always] mounted pack packs/data_2.pack
08:12:52.803 [system.io] [always] mounted pack packs/data_3.pack
08:12:52.804 [system.io] [always] mounted pack packs/data_4.pack
08:12:52.804 [system.io] [always] mounted pack packs/localized.pack
08:12:57.356 [data.missing] [warning] missing/invalid cursor for ANISELECT
08:12:57.361 [data.missing] [warning] missing/invalid cursor for MODIFIER_SABOTAGE
08:12:57.364 [data.missing] [warning] missing/invalid cursor for MODIFIER_TRADE
08:12:57.393 [data.missing] [warning] missing/invalid cursor for DRAGGABLE
08:12:57.394 [data.missing] [warning] missing/invalid cursor for DRAGGING
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_MULTIPLE_SELECT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_ATTACK
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_CHARACTER
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_RESOURCE
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_FORT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_MOVE_OBJECT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_WATCHTOWER
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_DEPLOYMENT_AREA
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_TILE
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_SPECIAL_PIECE
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_PAINT
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_ADJUST_HEIGHTS
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_ADD_UNIT
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_SETTLEMENT
08:12:59.518 [system.io] [warning] open: :Ìæ?víI@Ÿ‰@ is missing
08:13:01.464 [system.rpt] [error] Medieval 2: Total War encountered an unspecified error and will now exit.

You should never install an update on a Steam game unless you REALLY know what you’re doing- Steam handles this sort of thing automatically. My guess is attempting to install the update botched the installation.

In any case you can verify the integrity of the files through Steam or reinstall- either should fix the problem.

Источник

System rpt error medieval 2 total war

my game works greatly until i install update 1.2 whe i go to my system log it says this

08:12:52.773 [system.rpt] [always] CPU: SSE2
08:12:52.793 [system.rpt] [always] ==== system log start, build date: Jun 25 2007 version bld-medieval2-update2.1-30 (43169) ===
08:12:52.798 [system.io] [always] mounted pack packs/data_0.pack
08:12:52.799 [system.io] [always] mounted pack packs/data_1.pack
08:12:52.801 [system.io] [always] mounted pack packs/data_2.pack
08:12:52.803 [system.io] [always] mounted pack packs/data_3.pack
08:12:52.804 [system.io] [always] mounted pack packs/data_4.pack
08:12:52.804 [system.io] [always] mounted pack packs/localized.pack
08:12:57.356 [data.missing] [warning] missing/invalid cursor for ANISELECT
08:12:57.361 [data.missing] [warning] missing/invalid cursor for MODIFIER_SABOTAGE
08:12:57.364 [data.missing] [warning] missing/invalid cursor for MODIFIER_TRADE
08:12:57.393 [data.missing] [warning] missing/invalid cursor for DRAGGABLE
08:12:57.394 [data.missing] [warning] missing/invalid cursor for DRAGGING
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_MULTIPLE_SELECT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_ATTACK
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_CHARACTER
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_RESOURCE
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_FORT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_MOVE_OBJECT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_WATCHTOWER
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_DEPLOYMENT_AREA
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_TILE
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_SPECIAL_PIECE
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_PAINT
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_ADJUST_HEIGHTS
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_ADD_UNIT
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_SETTLEMENT
08:12:59.518 [system.io] [warning] open: :Ìæ?víI@Ÿ‰@ is missing
08:13:01.464 [system.rpt] [error] Medieval 2: Total War encountered an unspecified error and will now exit.

You should never install an update on a Steam game unless you REALLY know what you’re doing- Steam handles this sort of thing automatically. My guess is attempting to install the update botched the installation.

In any case you can verify the integrity of the files through Steam or reinstall- either should fix the problem.

Источник

System rpt error medieval 2 total war

my game works greatly until i install update 1.2 whe i go to my system log it says this

08:12:52.773 [system.rpt] [always] CPU: SSE2
08:12:52.793 [system.rpt] [always] ==== system log start, build date: Jun 25 2007 version bld-medieval2-update2.1-30 (43169) ===
08:12:52.798 [system.io] [always] mounted pack packs/data_0.pack
08:12:52.799 [system.io] [always] mounted pack packs/data_1.pack
08:12:52.801 [system.io] [always] mounted pack packs/data_2.pack
08:12:52.803 [system.io] [always] mounted pack packs/data_3.pack
08:12:52.804 [system.io] [always] mounted pack packs/data_4.pack
08:12:52.804 [system.io] [always] mounted pack packs/localized.pack
08:12:57.356 [data.missing] [warning] missing/invalid cursor for ANISELECT
08:12:57.361 [data.missing] [warning] missing/invalid cursor for MODIFIER_SABOTAGE
08:12:57.364 [data.missing] [warning] missing/invalid cursor for MODIFIER_TRADE
08:12:57.393 [data.missing] [warning] missing/invalid cursor for DRAGGABLE
08:12:57.394 [data.missing] [warning] missing/invalid cursor for DRAGGING
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_MULTIPLE_SELECT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_ATTACK
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_CHARACTER
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_RESOURCE
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_FORT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_MOVE_OBJECT
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_WATCHTOWER
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_DEPLOYMENT_AREA
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_TILE
08:12:57.410 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_SPECIAL_PIECE
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_PAINT
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_ADJUST_HEIGHTS
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_ADD_UNIT
08:12:57.411 [data.missing] [warning] missing/invalid cursor for MODIFIER_PLACE_SETTLEMENT
08:12:59.518 [system.io] [warning] open: :Ìæ?víI@Ÿ‰@ is missing
08:13:01.464 [system.rpt] [error] Medieval 2: Total War encountered an unspecified error and will now exit.

You should never install an update on a Steam game unless you REALLY know what you’re doing- Steam handles this sort of thing automatically. My guess is attempting to install the update botched the installation.

In any case you can verify the integrity of the files through Steam or reinstall- either should fix the problem.

Источник

Thread: Please help!! Medieval 2: Total War encountered an unspecified error and will now exit.

Thread Tools

Search Thread

Display

Please help!! Medieval 2: Total War encountered an unspecified error and will now exit.

I’m playing BC 2.3.2.2 mod and has successfully reached year 1338 AD. after i press end turn, the error «Medieval 2: Total War encountered an unspecified error and will now exit» occurs and game crashes. That happens not when my turn ends, but when Roman turn starts. The log file says:

I guess this CTD is related to bink player. Can please somebody help?

Re: Please help!! Medieval 2: Total War encountered an unspecified error and will now exit.

P.S. I have renamed minor_lose.bik. The log now as follows

So it’s not bink player related.

Re: Please help!! Medieval 2: Total War encountered an unspecified error and will now exit.

Have you installed any submods?

Basically, an «unspecified error» can be anything. If you can’t figure out the problem but are willing to continue playing with one faction less, use the kill_faction command on the Roman Empire and see if that helps. If I remember correctly you just need to type the following in the console and press enter:

,` button while on the campaign map. If you do not have an english keyboard, the console button is most likely the button under ESC, and left of 1. -> on scandinavian keyboards the console key is ц.

Another good idea is to disable Fog of War (command: toggle_fow) and see what’s going on in the beginning of the Roman turn (I put my money on a siege). Repeat this multiple times while zoomed in on different locations with Roman armies (or agents).

If none of this worked, I’m afraid there is nothing I can do to help you. (Not that I’m a BC guru anyway. It’s been ages since I last played M2TW properly.)

Источник

medieval 2 has encountered an unspecified error and will now close

Comments

How to solve Medieval 2 has encounted an unspecified error and will now exit: (WORKS!)

The reason the error happens is because they are too many files on your PC that are mixed up together, this normally happens when you have too many games that are from the same company or it also happens when you uninstall and reinstall the game because some game files remain even if you remove them from control panel.
Step 1:
Make sure you remove programs associated with Medieval 2 Total War, this includes games such as Rome total war too, Kingdoms expansion, ALL MODS, etc.

Step 2:
You might think that does nothing, well here comes the tricky part, NOT ALL FILES WERE DELETED! THEY ARE HIDING INSIDE YOUR COMPUTER, YOU JUST HAVE TO FLUSH THEM OUT ONCE AND FOR ALL! Proceed to step 3

Step 3:
If you have windows 7 or vista go to my computer to the search in the top right corner of the screen, if you XP go to the search computer place.

Step 4:
Type key words that are associated with TOTAL WAR such as SEGA, THE CREATIVE ASSEMBLY, descr, The third age, total war, battle. Think of many as you can and search them one by one and you shall see all those files come up. Search your mods too if you have some. When you think there are no files left THEN install Medieval 2

Step 5:
Install Medieval 2 total war, then install the patch for it straight afterwards. Play the game for a while. After that install the kingdoms expansion and get the patch for that and play for a while, the error should not come up, im certain.

Step 6:
That’s it!, if you get the error message again then you have not followed the instructions properly, if you don’t get the error then well done! VICTORY!

Trust me I was in the same position as you are, a lot of stress, I spent hours on the internet trying to find a solution but then I cam across this plan and it worked!

i don’t understand — i attempted to put the game on a computer that never had the game on it before and it still does not laod (i’m upgrading). i did download the current direct x update — ran the DirectXDiagnostics and found no errors. i then uninstalled the game from my current computer and reinstalled it without any issues. i’m running off of windows xp, not vista or 7 — and no fix seems to be working.

i also don’t understand why i would need to download a mod to correct this as for years it has played fine as is directly from the box.

Источник

Solved Steam Launch — Medieval 2: Total War has encountered an unspecified error and will now exit.

Big Total War fan here, really hoping someone can help me!

I’ve got M2 and M2:Kingdoms Expansion on Steam. I’ve run them for a years with absolutely no problems. I started a new campaign on Britannia with Wales and had played about 100 turns of the campaign over the last week and a half.

For some reason today when I tried to start it up up I get the error message: «Medieval 2: Total War has encountered an unspecified error and will now exit.». This happens if I try any of the expansions or M2 itself.

I’ve tried using the .exe file in order to launch straight from the game folders. I tried verifying the integrity of the game via steam. I tried launching in compatibility mode. I’ve also tried two clean reinstalls and ensuring before the second reinstall that I had obliterated all vestiges of the game files from my system in case something had a bug. None of this worked.

I’m really confused by it, mainly because as far as I’m aware nothing has changed since the game was working fine — no problems when playing in game before the last time I exited it, no updates to drivers on my computer or anything else that I’m aware of.

Can anyone help? It’s driving me crazy, would really appreciate the support

Источник

Thread: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.

Thread Tools

Display

HELP: Medieval 2: Total war encountered an unspecified error and will now exit.

I donВґt know, if IВґm right here, but IВґve got the following problem:
After a long played campaing on EB II Version 2.01 IВґve now seen a new one comes out: 2.1 + 2.1b Patch. So I followed the installation guide and it worked shortly: double clicked on the «non steam version-Connection» (Have the Gold version) and see the intro and the new red starting picture. After choosing the Romans to do the first start, it crashed and after it, nothing worked. So I uninstalled EB II and M2TW. Restart my computer and deleted the restfiles I had found.
I installed M2TW again under my second plate D:Games and start a campagin, than quit and all works fine. Then I install the EB II 2.1 from the downloaded Zipfile (extracted with 7zip) and it doesnВґt works. Everytime I get shortly a black window (sometimes I can shortly see the red starting loading picture) and then it makes BLING and the message comes: Medieval 2: Total war encountered an unspecified error and will now exit.

IВґd tried a lot of things recommended in the forums of twcenter and other stations. IВґve reinstalled it more than one time; IВґve patched it sometimes and sometimes I havenВґt. IВґve opened it as a administrator. I installed it one time under C:Games . I sometimes installed the installation exe from EB2 in a free folder and copy and paste it by my own. IВґve also tried the fix patch which is recommended and iВґm desperated now. 2.01 worked so fine and 2.1 doesnВґt want to start. Also it does not create a logfile or a log folder (but cfg is right), so I couldnВґt give a log file answer.

One thing IВґve seen is the following: After starting it with the administrator rights the black box which disappears short, stands now for long and tells me, that EB2 has to install into a Folder with an M2TW installation exe. But IT IS ?! I also tried to copy-paste it into the m2TW folder instead of the mods folder (also not working and the whole game doesnВґt works then). I also looked into the appdata folder to search for M2TWdatafiles after uninstalling, but canВґt find anything (also after installing thereВґs nothing).

If you have some ideas, please tell me. My PC has enough power to do the game (4 cores ГЎ 2,6 Ghz, 760 GTX, 8 GB Ram, original M2TW Gold CD, Win7).

Thank you for your help.

Re: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.

I donВґt know, if IВґm right here, but IВґve got the following problem:
After a long played campaing on EB II Version 2.01 IВґve now seen a new one comes out: 2.1 + 2.1b Patch. So I followed the installation guide and it worked shortly: double clicked on the «non steam version-Connection» (Have the Gold version) and see the intro and the new red starting picture. After choosing the Romans to do the first start, it crashed and after it, nothing worked. So I uninstalled EB II and M2TW. Restart my computer and deleted the restfiles I had found.
I installed M2TW again under my second plate D:Games and start a campagin, than quit and all works fine. Then I install the EB II 2.1 from the downloaded Zipfile (extracted with 7zip) and it doesnВґt works. Everytime I get shortly a black window (sometimes I can shortly see the red starting loading picture) and then it makes BLING and the message comes: Medieval 2: Total war encountered an unspecified error and will now exit.

IВґd tried a lot of things recommended in the forums of twcenter and other stations. IВґve reinstalled it more than one time; IВґve patched it sometimes and sometimes I havenВґt. IВґve opened it as a administrator. I installed it one time under C:Games . I sometimes installed the installation exe from EB2 in a free folder and copy and paste it by my own. IВґve also tried the fix patch which is recommended and iВґm desperated now. 2.01 worked so fine and 2.1 doesnВґt want to start. Also it does not create a logfile or a log folder (but cfg is right), so I couldnВґt give a log file answer.

One thing IВґve seen is the following: After starting it with the administrator rights the black box which disappears short, stands now for long and tells me, that EB2 has to install into a Folder with an M2TW installation exe. But IT IS ?! I also tried to copy-paste it into the m2TW folder instead of the mods folder (also not working and the whole game doesnВґt works then). I also looked into the appdata folder to search for M2TWdatafiles after uninstalling, but canВґt find anything (also after installing thereВґs nothing).

If you have some ideas, please tell me. My PC has enough power to do the game (4 cores ГЎ 2,6 Ghz, 760 GTX, 8 GB Ram, original M2TW Gold CD, Win7).

Thank you for your help.

Hello, I had that same error when I reinstalled everything too. Question: do you have M2TW Kingdoms, and have you installed it and then installed EB2 over that? I did that and it worked.

The EB2.1b release did not state that Kingdoms was required, but it actually is. (Omission on the part of the post writer?) If you are reinstalling everything, then you need to reinstall Kingdoms too. It says so in the general FAQ of EB2: EB2 is made exclusively to work on M2TW Kingdoms. I was so excited that when I installed M2TW I went on the EB2.1 trying to get at the game fast, but completely forgot Kingdoms. Once I realised this and reinstalled everything again, it worked perfectly.

Last edited by pezhetairoi; 12-28-2015 at 02:47 .

Источник

Medieval 2 total war encountered an unspecified error and will now exit

I’ve recently bought the game and was so excited to play SS6.4, but the game started to crashing with an error which is in the title. I played 36 turns without a single crash, but then it crashes anytime, mostly it annoys me when I win an epic battle but the error occurs so I have to play it again and put another effort in it. Please how can I get rid off this error forever?

Its one of those errors that attached itself to the saved game is it?

Often it will be non combattant units attached to the error, such as diplomats etc etc.

Start going crazy with Assassins, thats how i solved a similar persistant error previously.

Game runs out of RAM to use (limited to 2gb courtesy of 32bit software) and thus crash.

LAA removes 2gb limit which solves 99/100 mod related issues.

It should fix most battle related crashes. In my first campaign on SS it worked fine until I got to war with the HRE. That’s when my game started crashing.

@Gigantus Are you sure if I use your guide exactly as it is written, I won’t encounter any problems in the future?

IF you follow it properly then problems should be reduced to mod internal issues, provided you use the guide’s link to my separate installer for the 1.27 fix and apply it.

For further problems I would recommend to visit the mod’s site: http://www.twcenter.net/forums/forumdisplay.php?314

Ok.
Lets start at the beginning.

Does Medieval 2 vanilla work?

Have you installed Stainless Steel 6.3 + 6.4patch and the v1.27fix?

Where do you install Stainless Steel 6.3? Do you install it in its own folder or did you do stupid and renamed one of your kingdoms campaigns?

Do you even have Kingdoms?

Have you copied medieval2.exe and renamed it kingdoms.exe

Have you used LargeAdressAware on the medieval2.exe or the on the kingdoms.exe ?

That’s all the installation related things.

Now on to your campaign.

How many saves do you have?

Have you used an older save to see if it works?

Have you tried autoresolving and then continueing?

Have you started a new campaign to see if the problem persists in a new save file?

If your save is corrupted, then no amount will fix it.

Yeah, you guessed the issue correctly.

All the launcher does is tell the game (medieval.exe) to use a different folder for all the data.

You need to use LAA on the medieval2.exe and I also use it on the renamed kingdoms.exe just to be safe.

Well, have you given SS full acces? As in admin rights?

Windows can also be a b!tch when it comes to old games.

You’re playing Stainless Steel.

The Ai is given money
The Ai is given health bonusses
The Ai is given everything they can be given to be a fair fight.

That said. Stainless Steel and money is bloody ridiculous since there’s nothing to spend money on because you’re waiting on the recruitment pool to refil.

As for the Pope. F*ck him. Kill every enemy army that is on your land while the mission is active and you should be fine. If he excommunicates you. Kill the bugger.

Also. reputation is everything in Total War. So if you’re reliable or under that you’re free game for the AI.

Источник

3 Ways To Fix Medieval 2 Total War Encountered An Unspecified Error And Will Now Exit

The Medieval 2 Total War is a strategy game in which you have to hold settlements, attack other regions, and managing agents. Along with that, there are some great mod packs for this game that can make the overall experience more interesting. However, there are still some issues with glitches in the AI and diplomacy aspect of this game.

Recently, many users reported issues with the game crashing a few seconds after players try to load it. An error message “Medieval 2 Total War Encountered an Unspecified Error and Will Now Exit” will pop up and the game will crash. Here are some solutions that might help you fix this problem.

How to Fix Medieval 2 Total War Encountered An Unspecified Error And Will Now Exit?

Just like the majority of other games, faulty mods can create problems for users. So, if you are using mods and keep running into this error then you will need to remove the mods files from your PC. To remove the mods, you need to find the mod folder in your game files and then remove these folders from your PC. However, other players have mentioned that the easiest method to remove the mods would be to reinstall the game on your PC. So, if you have the time, then remove Medieval 2 from your PC and then install it again.

You can also try your luck with file verification from the Steam client before reinstalling the game. There is a slim chance that the verification process will fix the game files and you won’t have to bother with other solutions. Luckily, the verification process only takes a few minutes to complete and it is worth a try if you want to save your time. If the game is not fixed after verifying the game files, then you should go ahead and reinstall it on the PC. Remember to remove the game folder as well after removing the files from your PC.

1. Use Compatibility Mode

If the problem is not fixed by removing the mods from your game, then you should check the compatibility options. To do that, you should access the game folders from the file explorer and then navigate to the Medieval 2 executable file. Right-click on this file and then click on properties to access the pop-up menu. Now, you can switch to the compatibility options and make sure that the program is running in compatibility mode. You can use the Windows 7 compatibility mode and then try launching the game after applying the settings.

Along with that, you need to also check the administrator permissions box to allow the game file to work on your PC. Changing the compatibility options will only take a minute if you know what you’re doing. After allowing the admin privileges, you should launch the game again to see if it works for your game. Hopefully, you won’t be dealing with the unspecified error in Medieval 2 and you can advance your kingdom peacefully without worrying about crashes.

The last thing that you can try to fix the unspecified error is by rebuilding the game from the Steam client. But before you do that, you will have to disable the security programs like an anti-virus that are operating in the background. Then you can just create a backup of your game folder and remove the folder from the steam game directory.

Now, you need to create another folder with the same name as your Medieval 2 game folder. Launch the Steam client and start the file verification process. The client will download all of the vanilla files back to your PC.

After the rebuilding process is complete, you can launch the game to see if it works. If the game is not crashing at this point, then you need to exit out of the game and then move the game files from the backup folder to the current game folder. Replace the files in the destination and that should update your progress in the game.

You won’t have to deal with unspecified errors anymore and your game should work perfectly after the rebuild process is complete. However, if you need further assistance then you can contact the support team or use community forums to interact with other players.

Источник

1. 12-28-2015, 00:56

   
   

   #1

   

   
   Member
   

   Member

   

   ---

   HELP: Medieval 2: Total war encountered an unspecified error and will now exit.
   

   Hello,

   I don´t know, if I´m right here, but I´ve got the following problem:
   After a long played campaing on EB II Version 2.01 I´ve now seen a new one comes out: 2.1 + 2.1b Patch. So I followed the installation guide and it worked shortly: double clicked on the «non steam version-Connection» (Have the Gold version) and see the intro and the new red starting picture. After choosing the Romans to do the first start, it crashed and after it, nothing worked. So I uninstalled EB II and M2TW. Restart my computer and deleted the restfiles I had found.
   I installed M2TW again under my second plate D:Games and start a campagin, than quit and all works fine. Then I install the EB II 2.1 from the downloaded Zipfile (extracted with 7zip) and it doesn´t works. Everytime I get shortly a black window (sometimes I can shortly see the red starting loading picture) and then it makes BLING and the message comes: Medieval 2: Total war encountered an unspecified error and will now exit.

   I´d tried a lot of things recommended in the forums of twcenter and other stations. I´ve reinstalled it more than one time; I´ve patched it sometimes and sometimes I haven´t. I´ve opened it as a administrator. I installed it one time under C:Games … I sometimes installed the installation exe from EB2 in a free folder and copy and paste it by my own. I´ve also tried the fix patch which is recommended and i´m desperated now. 2.01 worked so fine and 2.1 doesn´t want to start. Also it does not create a logfile or a log folder (but cfg is right), so I couldn´t give a log file answer.

   One thing I´ve seen is the following: After starting it with the administrator rights the black box which disappears short, stands now for long and tells me, that EB2 has to install into a Folder with an M2TW installation exe. But IT IS ?! I also tried to copy-paste it into the m2TW folder instead of the mods folder (also not working and the whole game doesn´t works then). I also looked into the appdata folder to search for M2TWdatafiles after uninstalling, but can´t find anything (also after installing there´s nothing).

   If you have some ideas, please tell me. My PC has enough power to do the game (4 cores á 2,6 Ghz, 760 GTX, 8 GB Ram, original M2TW Gold CD, Win7).

   Thank you for your help.

   ---

2. 12-28-2015, 02:46

   
   

   #2

   

   
   Amanuensis
   

   Member

   

   ---

   Re: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.
   

   Originally Posted by baerbarossa
   

   Hello,

   I don´t know, if I´m right here, but I´ve got the following problem:
   After a long played campaing on EB II Version 2.01 I´ve now seen a new one comes out: 2.1 + 2.1b Patch. So I followed the installation guide and it worked shortly: double clicked on the «non steam version-Connection» (Have the Gold version) and see the intro and the new red starting picture. After choosing the Romans to do the first start, it crashed and after it, nothing worked. So I uninstalled EB II and M2TW. Restart my computer and deleted the restfiles I had found.
   I installed M2TW again under my second plate D:Games and start a campagin, than quit and all works fine. Then I install the EB II 2.1 from the downloaded Zipfile (extracted with 7zip) and it doesn´t works. Everytime I get shortly a black window (sometimes I can shortly see the red starting loading picture) and then it makes BLING and the message comes: Medieval 2: Total war encountered an unspecified error and will now exit.

   I´d tried a lot of things recommended in the forums of twcenter and other stations. I´ve reinstalled it more than one time; I´ve patched it sometimes and sometimes I haven´t. I´ve opened it as a administrator. I installed it one time under C:Games … I sometimes installed the installation exe from EB2 in a free folder and copy and paste it by my own. I´ve also tried the fix patch which is recommended and i´m desperated now. 2.01 worked so fine and 2.1 doesn´t want to start. Also it does not create a logfile or a log folder (but cfg is right), so I couldn´t give a log file answer.

   One thing I´ve seen is the following: After starting it with the administrator rights the black box which disappears short, stands now for long and tells me, that EB2 has to install into a Folder with an M2TW installation exe. But IT IS ?! I also tried to copy-paste it into the m2TW folder instead of the mods folder (also not working and the whole game doesn´t works then). I also looked into the appdata folder to search for M2TWdatafiles after uninstalling, but can´t find anything (also after installing there´s nothing).

   If you have some ideas, please tell me. My PC has enough power to do the game (4 cores á 2,6 Ghz, 760 GTX, 8 GB Ram, original M2TW Gold CD, Win7).

   Thank you for your help.

   Hello, I had that same error when I reinstalled everything too. Question: do you have M2TW Kingdoms, and have you installed it and then installed EB2 over that? I did that and it worked.

   The EB2.1b release did not state that Kingdoms was required, but it actually is. (Omission on the part of the post writer?) If you are reinstalling everything, then you need to reinstall Kingdoms too. It says so in the general FAQ of EB2: EB2 is made exclusively to work on M2TW Kingdoms. I was so excited that when I installed M2TW I went on the EB2.1 trying to get at the game fast, but completely forgot Kingdoms. Once I realised this and reinstalled everything again, it worked perfectly.

   Hope this helps.

   Last edited by pezhetairoi; 12-28-2015 at 02:47.

   

   EB DEVOTEE SINCE 2004

   ---

3. 12-28-2015, 10:02

   
   

   #3

   

   
   Member
   

   Member

   

   ---

   Re: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.
   

   Spoiler Alert, click show to read: 

   I have M2TW Gold Edition, but when I understand you right, than I have to install the addons too (American, Britain, etc.)? I´ll try this. And yes, I have first installed the maingame, then start a campaign, quit it, and installed then EBII (also when I reinstalled all). I thought «Kingdoms» is the maingame and the other addons are «britain, crusade, american». I´ll try this and will answer.

   ---

4. 12-28-2015, 14:41

   
   

   #4

   

   
   Amanuensis
   

   Member

   

   ---

   Re: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.
   

   I don’t know if the campaigns are needed or not, but I decided to save myself the time of finding out and installed them all when I installed Kingdoms. It works, is all I can say. I did exactly what you described though—basically followed the instructions in the 2.1b release post to the letter.

   

   EB DEVOTEE SINCE 2004

   ---

5. 12-28-2015, 16:05

   
   

   #5

   

   
   Member
   

   Member

   

   ---

   Re: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.
   

   IT WORKED !

   Thank you a lot. I uninstalled all and installed it new (this time with all add ons crusade, american a.s.o.) and EBII worked fine with the patch 2.1b ! Also there is now an «kingdom.exe», which wasn´t there before (only a M2TW.exe and another one).

   Thank you! And now I´ll play EBII

   ---

6. 12-28-2015, 16:46

   
   

   #6

   

   
   Amanuensis
   

   Member

   

   ---

   Re: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.
   

   Awesome. Victory and glory!

   

   EB DEVOTEE SINCE 2004

   ---

7. 12-30-2015, 05:04

   
   

   #7

   

   
   Member
   

   Member

   

   ---

   Re: HELP: Medieval 2: Total war encountered an unspecified error and will now exit.
   

   I’ll add my 2 cents worth in case anyone has the new STEAM version which has no kingdoms exe. This will result in an unspecified error.
   1) Copy the Medieval II Total War folder out of the program Files (x86) folder.
   2) Paste in your Kingdoms exe file*
   3) Run each exe and save a game (ignore certain weirdness like kingdoms not linking to the 4 add ons)
   4) apply EBII etc.
   Notes:
   *If your kingdoms exe was from a non-steam version you can use the non-steam EBII launcher
   If your kingdoms exe was an old STEAM exe it might launch STEAM (mine was from a previous CD GOLD version — stupidly I sold it a few years ago and then had to get the replacement STEAM version — ) and you might need the steam EBII launcher.
   **If you do not have and cannot get a kingdoms exe, it might work to simply paste the new STEAM Medieval2 exe renamed as kingdoms exe. I have not tried this but according to some threads relating the new STEAM version and mods this might work.

   Finally if any of this does not work please let me know. I’ve just spent all morning getting mine to work!
   Good luck.

   Member thankful for this post:

   ---

   ---

1. August 05, 2013, 08:18 PM

   
   

   #1

   

   
   Laetus
   

   ---

   

   Medieval 2: Total War encountered an unspecified error and will now exit.
   

   Hello, i need help with this error i keep getting, i open medieval 2 total war, it loads for a second and then comes up with the error, but my kingdom expansions work fine.

   I have a non steam version, With third age total war up to patch 3.2 installed, i also have MOS Sub mod 1.41, and every time i try and start a battle on TATW it comes up with the same message.

   I’ve tried various things from uninstalling it, to turning off daylight saving time…please help.

   ---

2. August 05, 2013, 08:21 PM

   
   

   #2

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   

   ---

3. August 05, 2013, 08:52 PM

   
   

   #3

   

   
   Laetus
   

   ---

   

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   Yep http://gyazo.com/e58c1f9bcf19ac3c6a078bc4f3750ddc
   Oh yeah im on windows 8, incase you need to know

   ---

4. August 05, 2013, 09:01 PM

   
   

   #4

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   Win 8 = along with disable the UAC,
   have you taken ownersip of C: drive?
   have you installed the game outside Program files (x86)?

   

   ---

5. August 05, 2013, 09:06 PM

   
   

   #5

   

   
   Laetus
   

   ---

   

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   Nope, the game is in program files (x86)
   And yes i have.

   ---

6. August 05, 2013, 09:19 PM

   
   

   #6

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   The game hates it there. anything XP based hates it there.

   

   ---

7. August 05, 2013, 09:22 PM

   
   

   #7

   

   
   Laetus
   

   ---

   

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   Its alright now, ive sorted it, i deleted both descr_geography_new, its working fine now.
   Thank you for you help.

   ---

8. August 05, 2013, 09:29 PM

   
   

   #8

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   You didn’t say you unpacked it. Good to hear you have it sorted. Enjoy playing.

   

   ---

9. August 06, 2013, 08:26 PM

   
   

   #9

   Re: Medieval 2: Total War encountered an unspecified error and will now exit.
   

   Thread moved from M2TW GD to Tech help.

   ---

10. November 03, 2016, 10:19 AM

    
    

    #10

    

    
    Laetus
    

    ---

    

    Re: Medieval 2: Total War encountered an unspecified error and will now exit.
    

    Medieval 2: Total War encountered an unspecified error and will now exit.
    I add mod Third Age and i also add launcher, but i start the launcher write Medieval 2: Total War encountered an unspecified error and will now exit.

    But when I turn on the game without mods, it’s works
    Please helpppp

    And no steam version

    But when I turn on the game without mods

    ---

11. November 03, 2016, 11:03 AM

    
    

    #11

    Re: Medieval 2: Total War encountered an unspecified error and will now exit.
    

    Hi Filip742224 and welcome to the forums!

    Your problem could be caused by a multitude of reasons. What follows is a brief and somewhat superficial list of the things you have to do in order to make everything work as intended.

    1. Download the mods while leaving your PC alone. To avoid a corrupt download.
    2. Meet the requirements for the mod you want to play, e.g. v1.5 for TATW (Third Age Total War).
    3. Edit Security for you main M2TW folder/or take Ownership of your main M2TW folder
    4. Unhide hidden folders
    5. Check your VirtualStore folder for Medieval 2 Total War folder, and delete it if you find it there. (Steps 3, 4 and 5 copied and pasted from here, where everything is described and explained).
    6. Install outside of Program Files. To avoid paranoid attitude of Windows and Windows-based games.
    7. Install in the correct folder, e.g. Medieval 2 Total War for TATW instead of Medieval 2 Total Warmods. Other submods (like MOS or DaC) may have other target folders, so be sure to check first.
    8. Install in the correct order. To ensure the correct order of overwriting files.
    9. Running the installers as administrator usually helps.
    10. Install leaving your PC alone, closing all other applications and programs. Again, to avoid a corrupt installation.
    11. Download and install Notepad++. You will need it to edit text files (the default editor doesn’t work), most crucially…
    12. …Change Third Age.BAT file present in your Third_Age_ 3 folder: replace kingdoms.exe entry part with medieval2.exe:

        cd ….
        start kingdoms.exe @modsThird_Age_3TATW.cfg

        to

        cd ….
        start

        medieval2.exe @modsThird_Age_3TATW.cfg

        Save the file, and Exit. (Again not mine, taken from here).

    13. Alternatively, in case you want to play a sub-mod of TATW, don’t change the .bat file, but follow the relevant instructions on how to start that particular sub-mod, which will probably have already edited the .bat file.

    Compare the above procedure to what you did and find the error. In any case, you have to be a bit more specific. A more or less wild guess would be that you haven’t disabled UAC.

    Generally follow each mod’s instructions to the letter, do it slowly and carefully and you will be fine. If all else fails, you can always ask for help.

    Cheers!

    Last edited by Socrates1984; November 04, 2016 at 04:01 PM.

    Reason: Deleted some wrong points.

    ---

12. November 03, 2016, 11:04 AM

    
    

    #12

    Re: Medieval 2: Total War encountered an unspecified error and will now exit.
    

    Best to post your question in TATW’s help forum. They will ask you for the log and some more details, I think there is a thread in that forum that explains how to present a problem report.

    @Socrates — he hasn’t got Steam — scratch points 11 and 12. I think it might be number 7 that is the issue.

    ---

13. November 04, 2016, 03:58 PM

    
    

    #13

    Re: Medieval 2: Total War encountered an unspecified error and will now exit.
    

    Originally Posted by Gigantus
    

    Best to post your question in TATW’s help forum. They will ask you for the log and some more details, I think there is a thread in that forum that explains how to present a problem report.

    @Socrates — he hasn’t got Steam — scratch points 11 and 12. I think it might be number 7 that is the issue.

    You are absolutely right and thanks for pointing it out. I somehow missed that part of his post. I already edited the post to avoid causing any more confusion to anyone else, who happens to read it.

    If it is 7 (wrong installation folder), as you said, or security matters, as I said, I would of course bet on 7…

    

    ---

14. August 07, 2019, 07:45 AM

    
    

    #14

    

    
    Laetus
    

    ---

    

    Re: Medieval 2: Total War encountered an unspecified error and will now exit.
    

    Hello i have the problem now and i have tried everything except the game and the mod to download again and if i download it again can i save my saves from my campaign

    ---

15. August 08, 2019, 06:55 AM

    
    

    #15

    Re: Medieval 2: Total War encountered an unspecified error and will now exit.
    

    The best will be to post in the mod’s forum and provide them with the log (compress before uploading) and a short description when it happened.

    ---