Mount and blade warband как изменить флаг

1. Для начала, нам нужно скачать программу «Paint.NET», в которой мы будем свой флаг и создавать. Саму программу Вы легко можете найти в интернете, но вот ссылка: Скачать Paint.NET 2. Также стоит раздобыть чистое полотно. Я оставлю его под спойлером ниже. Сохраняйте себе на компьютер, и...

20200521130235_1.jpg

1. Для начала, нам нужно скачать программу «Paint.NET», в которой мы будем свой флаг и создавать. Саму программу Вы легко можете найти в интернете, но вот ссылка: Скачать Paint.NET

2. Также стоит раздобыть чистое полотно. Я оставлю его под спойлером ниже. Сохраняйте себе на компьютер, и открывайте программой «Paint.NET».

Шаблон для флага.png

3. Далее, нам нужно зайти в папку с игрой, и найти папку «Textures». В ней нужно найти файлы «banners_a», «banners_b», «banners_c», и остальные с таким же названием, которые там ещё будут. Откройте эти текстуры с помощью программы «Paint.NET». Рассмотрите все флаги, и выберите один из наименее понравившихся Вам, так как тот, что мы будем создавать, нужно будет поставить поверх него. В принципе, лишнее можно закрывать.

4. Теперь переходим к созданию самого флага. Когда Вы отыщите картинку, которую хотите поместить на флаг, откройте её с помощью программы «Paint.NET». В качестве примера я возьму логотип Форума.

rpgrussia-logo-1.png

5. Полотно нужно подготовить, и покрасить в нужный цвет. На панели инструментов слева надо выбрать прямоугольное выделение, и выделить само полотно. Вторым действием выбираем желаемый цвет, после чего жмём «Эффекты» -> «Узоры» -> «Облака».

Создание флага1.jpg

В появившимся окне ставим следующие настройки, и жмём «ОК». Нажав на «Эффекты» (либо ctrl+F) повторяем действие, пока не будем удовлетворены цветом.

3.JPG

6. Переходим к нашему логотипу, и если нужно убрать что-то лишнее, то просто выбираем это волшебной палочкой в панели инструментов, и удаляем. А то, что нам нужно, выделяем, и просто копируем (ctrl+C). Теперь на вкладке с полотном нужно создать новый слой (ctrl+shift+N). Далее жмём ctrl+V, сохраняем размер полотна, и подогнав логотип под нужный размер, оба слоя нужно объединить.

Объединение слоя.jpg

Всё, теперь сохраняем, и можем закрывать наш флаг и логотип.

7. Приближаем текстуру с флагами, и паралельно открываем уже наш сохранённый флаг. Открывать нужно не программой, а обычным двойным кликом, после чего просто нажимаем ctrl+C, и уже в программе жмём ctrl+V.

замена флага.JPG

Ставим наш флаг на место того флага, что мы хотим заменить. Проверяем. Сохраняем. Закрываем. Ещё раз проверяем обычным просмотром фотографии. Видим, что флаг на месте, и осталось взглянуть на него в игре.

перетащили флаг.JPG

Стоит добавить, что если у Вас помимо папки «Textures» есть ещё и «TexturesHD», то картинку с флагами где Вы делали замену стоит закинуть и в ту папку тоже, заменив старую. Теперь действительно уже смотрим на результат в игре:

20200521130235_1.jpg

20200521130319_1.jpg

20200521130113_1.jpg

Обновлено: 09.02.2023

В данном руководстве я покажу вам как создать собственный герб в игре Mount & Blade: Warband

2

1

3,205 уникальных посетителей
128 добавили в избранное

Дальше переходим в папку с игрой и находим папку Textures (SteamsteamappscommonMountBlade WarbandTextures).
Там находим файлы banners_a, banners_ b, banners_с
На следующем этапе шаблон, эти файлы, а так же картинку которую хотите сделать гербом открываем в Paint net. У меня для герба шаблоном послужит Knuckles из Vrchat

Копируем картинку для герба на новый слой шаблона в Paint Net.

Если картинка будет слишком большого размера, то вам предложат выбор, обязательно
выбираем «сохранить размер полотна»

После этого подгоняем размер картинки под шаблон

Далее нажимаем свойства слоя и выбираем режим «Умножения»

Если у картинки цветной фон, то копируем его пипеткой. Далее выделяем весь шаблон, заходим во вкладку узоры, облака.

И выставляем такие параметры

Далее применяем его, пока вы не достигнете нужного вам результата.

После этого находим в ранее открытых из папки Textures папки файлах герб который вам не нравится. В моем случае это будет первый герб.

После чего объединяем слои шаблона и картинки, и копируем на этот файл заменяя им нужный нам герб.

На последнем этапе сохраняем измененный файл и заходим в игру

Для замены гербов в модах, проделываем все тоже самое, только берем файлы из папки
MountBlade WarbandModulesMODTextures

5. Полотно нужно подготовить, и покрасить в нужный цвет. На панели инструментов слева надо выбрать прямоугольное выделение, и выделить само полотно. Вторым действием выбираем желаемый цвет, после чего жмём «Эффекты» -> «Узоры» -> «Облака».

Создание флага1.jpg

В появившимся окне ставим следующие настройки, и жмём «ОК». Нажав на «Эффекты» (либо ctrl+F) повторяем действие, пока не будем удовлетворены цветом.

3.JPG

6. Переходим к нашему логотипу, и если нужно убрать что-то лишнее, то просто выбираем это волшебной палочкой в панели инструментов, и удаляем. А то, что нам нужно, выделяем, и просто копируем (ctrl+C). Теперь на вкладке с полотном нужно создать новый слой (ctrl+shift+N). Далее жмём ctrl+V, сохраняем размер полотна, и подогнав логотип под нужный размер, оба слоя нужно объединить.

Объединение слоя.jpg

Всё, теперь сохраняем, и можем закрывать наш флаг и логотип.

7. Приближаем текстуру с флагами, и паралельно открываем уже наш сохранённый флаг. Открывать нужно не программой, а обычным двойным кликом, после чего просто нажимаем ctrl+C, и уже в программе жмём ctrl+V.

замена флага.JPG

Ставим наш флаг на место того флага, что мы хотим заменить. Проверяем. Сохраняем. Закрываем. Ещё раз проверяем обычным просмотром фотографии. Видим, что флаг на месте, и осталось взглянуть на него в игре.

перетащили флаг.JPG

Стоит добавить, что если у Вас помимо папки «Textures» есть ещё и «TexturesHD», то картинку с флагами где Вы делали замену стоит закинуть и в ту папку тоже, заменив старую. Теперь действительно уже смотрим на результат в игре:

Mount & Blade: Competitive

Вам необходимо заменить одно из знамен из пакета знамен (banners_a.dds и прочие) в папке «Textures».

Вы можете использовать специальный шаблон.

Редактировать знамя вы можете в любом из удобных вам графических редакторов.
Не забудьте сохранить пакет флагов с тем же названием и расширением .dds.

Читайте также:

      

  • Rise of the tomb raider как убрать кусты в пещерах
  •   

  • Как установить gears of war 3 на пк
  •   

  • Рога и копыта игра как поменять разрешение экрана
  •   

  • Фифа мобайл вылетает что делать
  •   

  • 2 припои требования предъявляемые к ним классификация припоев состав мягкие и твердые припои

  • Всадники Кальрадии »
  • Forum »
  • Модификации »
  • Обмен опытом (в помощь мододелу) »
  • Обмен опытом: Mount&Blade »
  • Вопросы и ответы по модостроению (Модераторы: Janycz, HunterWolf) »
  • Изменение формы флагов на статегической карте
  • Печать

Страницы: [1]   Вниз

Теги:

Тема: Изменение формы флагов на статегической карте  (Прочитано 2299 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Уважаемые момоделы!  :)
В каких файлах нужно покопаться, чтобы изменить форму флагов у лордов, замков и городов на стратегической карте? Например, заменить вытянутые по горизонтали флаги на флаги, вытянутые по вертикали.


Записан


Записан

  • Фракция: Наемники


Записан

Моя конфигурация:
Нормальная, мне хватает.

Alejandro Sanchez,
Для оригинала
путь: ***папка с игройCommonRes
файлы:
map_flags.brf
map_flags_b.brf
map_flags_с.brf
map_flags_в.brf

Для модов (если мод использует свои флаги):
путь: ***папка с игройModulesпапка с модомResource
файлы: Могут называть как угодно. Ищите.

Чем открыть и как работать с *brf
Вопрсница по *brf

Большое спасибо!  :thumbup:

В каких файлах нужно покопаться

Начать от сюда стоит http://rusmnb.ru/index.php?topic=11168.0 , а то момоделы обидятся и закидают какашками кирпичами

Намотал на ус  8-)


Добавлено: 16 Ноября, 2012, 15:42

uhanich,
вот мне еще что непонятно, в каком файле записано, какой город или лорд какой формы флаг будет иметь? Например, мне нужно, чтобы у всех был флаг типа c или d. Не редактировать же мне модели флагов в файлах map_flags.brf
и map_flags_b.brf ? Или все же придется работать с моделями?
Сдается мне, что помочь может файл map_icons.txt, но это только мое предположение =)

« Последнее редактирование: 16 Ноября, 2012, 15:52 от Alejandro Sanchez »


Записан

  • Печать

Страницы: [1]   Вверх

Теги:

Banners are flags that represent specific Vassals or Monarchs. The owners themselves will fly their banner on the world map, but it will also be flown over their towns and castles.

During character creation, if you choose to be the child of an impoverished noble, you will be given the option to carry a banner from the start of the game — otherwise, you don’t receive a banner until you have become a vassal or monarch. In multiplayer you will be able to choose a banner right from character creation. You will also have the option to refrain from choosing a banner and use the faction’s banner instead.

Your own banner will also be planted in the ground during battles at your side of the battlefield right next to your inventory chest. This makes finding your chest if you need to swap equipment or reload arrows much easier.

Your emblem will also be displayed on most shields and Heraldic Mail, whether you are wearing it or any of your troops.

Since most banners are already in use, if you choose one that is, its original owner will receive a red and black {displaystyle 2times 2} checkered banner instead, which is not available to the player. However, if you do not choose a banner, this «default» banner will be seen in battles above your party’s troops. Once you decide to choose a banner, your party will be labeled with your new banner, while the «default» banner will still be used by friendly forces that do not belong to any named character (e.g. foragers or caravan guards).

There are a few banners that are not already in use, however. If you use the cheatmenu to change your banner again, your old design does not return to its former owner, rather there will be multiple lords with the same checkered banner.

Designs[]

Warband added a new faction with new vassals, and so expanded the number of options to choose from. The following displays all banners as seen in Warband, altogether there are 128 flags to choose from.

The fifth banner on the top row is the only banner that is not used by another Lord, King or Claimant

The last three banners on the bottom row are duplicates, allowing the player to share the same banner as the the lords and claimant that already use them

All Warband banners in one simple image

Calradians

With Fire & Sword[]

In keeping with the historical nature of With Fire & Sword, many of the banners are based on flags and standards from history, such as the flag of Sweden, the banner bearing the knight and eagle of the Polish-Lithuanian Commonwealth, and the rifleman icon of the Cossack Hetmanate. Unlike in Warband, players have no option of starting the game as a noble, so they cannot carry a banner until becoming the vassal of a nation.

An example of a nation banner appearing in multiplayer: a Polish banner on a flag point in a Conquest game.

Nations themselves also have banners, but these are only seen in Custom Battles and multiplayer above friendly troops. In multiplayer nation banners also appear on the field in some game modes.

All banners in one image, including the missing one

The «debug banner».

Excluding nation banners, a total of {displaystyle 7times 16+8=120} banners appear in the game, however the files include {displaystyle 6times 21=126} banners. Out of the 6 not included, 5 are actually repeats of ones that are included, so the only banner that is truly excluded is shown to the right. However, it is not true that it does not appear in the game at all; once you become a noble, if you choose a banner that happened to already be in use, then the original owner’s party and fiefs will fly this banner on the map, but on the character screen it will show a banner similar to that of Hetman Bogdan Hmelnitski, without a triangle cut at the bottom. However, in battles, the character whose banner was «stolen» will have a plain white circle above.

Occasionally a faction banner appears on the map if the player chooses a banner that is already in use. So if you see either a faction banner or one similar to the one on the right, it is likely you have encountered a bug.

Even the game has only five nations, replacing the five classic factions, the banner of the Sarranid Sultanate from Warband still appears unchanged in the files of With Fire & Sword.

Viking Conquest[]

All the banners available in the Viking Conquest DLC. A total of 177 banners.

Banners are flags that represent specific Vassals or Monarchs. The owners themselves will fly their banner on the world map, but it will also be flown over their towns and castles.

During character creation, if you choose to be the child of an impoverished noble, you will be given the option to carry a banner from the start of the game — otherwise, you don’t receive a banner until you have become a vassal or monarch. In multiplayer you will be able to choose a banner right from character creation. You will also have the option to refrain from choosing a banner and use the faction’s banner instead.

Your own banner will also be planted in the ground during battles at your side of the battlefield right next to your inventory chest. This makes finding your chest if you need to swap equipment or reload arrows much easier.

Your emblem will also be displayed on most shields and Heraldic Mail, whether you are wearing it or any of your troops.

Since most banners are already in use, if you choose one that is, its original owner will receive a red and black {displaystyle 2times 2} checkered banner instead, which is not available to the player. However, if you do not choose a banner, this «default» banner will be seen in battles above your party’s troops. Once you decide to choose a banner, your party will be labeled with your new banner, while the «default» banner will still be used by friendly forces that do not belong to any named character (e.g. foragers or caravan guards).

There are a few banners that are not already in use, however. If you use the cheatmenu to change your banner again, your old design does not return to its former owner, rather there will be multiple lords with the same checkered banner.

Designs[]

Warband added a new faction with new vassals, and so expanded the number of options to choose from. The following displays all banners as seen in Warband, altogether there are 128 flags to choose from.

The fifth banner on the top row is the only banner that is not used by another Lord, King or Claimant

The last three banners on the bottom row are duplicates, allowing the player to share the same banner as the the lords and claimant that already use them

All Warband banners in one simple image

Calradians

With Fire & Sword[]

In keeping with the historical nature of With Fire & Sword, many of the banners are based on flags and standards from history, such as the flag of Sweden, the banner bearing the knight and eagle of the Polish-Lithuanian Commonwealth, and the rifleman icon of the Cossack Hetmanate. Unlike in Warband, players have no option of starting the game as a noble, so they cannot carry a banner until becoming the vassal of a nation.

An example of a nation banner appearing in multiplayer: a Polish banner on a flag point in a Conquest game.

Nations themselves also have banners, but these are only seen in Custom Battles and multiplayer above friendly troops. In multiplayer nation banners also appear on the field in some game modes.

All banners in one image, including the missing one

The «debug banner».

Excluding nation banners, a total of {displaystyle 7times 16+8=120} banners appear in the game, however the files include {displaystyle 6times 21=126} banners. Out of the 6 not included, 5 are actually repeats of ones that are included, so the only banner that is truly excluded is shown to the right. However, it is not true that it does not appear in the game at all; once you become a noble, if you choose a banner that happened to already be in use, then the original owner’s party and fiefs will fly this banner on the map, but on the character screen it will show a banner similar to that of Hetman Bogdan Hmelnitski, without a triangle cut at the bottom. However, in battles, the character whose banner was «stolen» will have a plain white circle above.

Occasionally a faction banner appears on the map if the player chooses a banner that is already in use. So if you see either a faction banner or one similar to the one on the right, it is likely you have encountered a bug.

Even the game has only five nations, replacing the five classic factions, the banner of the Sarranid Sultanate from Warband still appears unchanged in the files of With Fire & Sword.

Viking Conquest[]

All the banners available in the Viking Conquest DLC. A total of 177 banners.

Понравилась статья? Поделить с друзьями:
  • Mount and blade warband как изменить размер битвы
  • Mortal online 2 ошибка eos failed to init platform
  • Mount and blade warband как изменить имя персонажа
  • Mortal kombat xl ошибка при запуске 0xc000007b
  • Mount and blade warband как изменить внешность спутника