This is a merged/compiled list of Windows Update Agent result/return/error codes.
WUA has various result codes of its own, but it also inherits from Win32, and when WUA is called by another process (e.g. System Centre Configuration Manager — Software Updates), or, itself calls another component (e.g. MSI or CBS) it can be not-so-obvious
as to the symptom vs. cause.
Troubleshooting WUA results/errors can be tricky enough, without having to hunt in multiple places for an error lookup!
Sources:
http://inetexplorer.mvps.org/archive/windows_update_codes.htm
http://technet.microsoft.com/en-us/library/bb632794.aspx#BKMK_Software_Updates
http://msdn.microsoft.com/en-us/library/ms695782(v=VS.85).aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/dd542646(v=vs.85).aspx
http://support.microsoft.com/kb/938205
http://msdn.microsoft.com/en-us/library/aa385465(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/aa383770(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/ms681382(v=vs.85).aspx
http://joshpoley.blogspot.com.au/2011/09/hresults-facilitywindowsupdate.html
HexError DecError Error String Description
0x00000000 -4294967296 Success
0x00000001 -4294967295 ERROR_INVALID_FUNCTION
0x0000007B -4294967173 Error_Invalid_Name The filename, directory name,or volume label syntax is incorrect
0x00000275 -4294966667 Error_cant_enable_Deny_only A group marked use for deny only can not be enabled
0x0000041D -4294966243 ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control request in a timely fashion.
0x000004C3 -4294966077 Error_Session_Credential_Conflict Multiple connections to a server or shared resource by the same user,using more than one user name, are not allowed.
0x000004C5 -4294966075 Error_Dup_Domainename The workgroup or domain name is already in use by another computer on the network.
0x000005D5 -4294965803 NULL
0x00000619 -4294965735 error_Invalid_HW_Profile The specified hardware profile configuration is invalid
0x00000641 -4294965695 Error_Install_Service_failure The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed.
0x00000643 -4294965693 ERROR_INSTALL_FAILURE Fatal error during installation
0x00000652 -4294965678 ERROR_INSTALL_ALREADY_RUNNING Another installation is already in progress. Complete that installation before proceeding with this install.
0x000006D9 -4294965543 EPT_S_Not_Registered There are no more endpoints available from the endpoint mapper.
0x000006F6 -4294965514 RPC_X_BYTE_Count_TOO_Small The byte count is too small
0x00000963 -4294964893 NERR_BADPasswordCore This share name or password is invalid
0x00000BC2 -4294964286 Error_Success_Reboot_Required
0x00000C0B -4294964213 NULL
0x00000CC4 -4294964028 NULL
0x00000D47 -4294963897 NULL
0x00000E5C -4294963620 NULL
0x00000E74 -4294963596 NULL
0x0000109F -4294963041 NULL
0x00001112 -4294962926 Error_No_Media_In_Drive No media in drive
0x0000117A -4294962822 NULL
0x00001190 -4294962800 Error_Shutdown_IS_Scheduled A system shutdown has already been scheduled
0x00001234 -4294962636 Error_Port_Unreachable No Service is operating at the destination network endpoint on the remote system
0x00001396 -4294962282 Error_Wrong_Target_Name Logon failure: The target account name is incorrect.
0x000013D7 -4294962217 Error_Cluster_restype_Note_Supported The specified node does not support a resource of this type. This amy be due to version inconsistancies or due to the absence of the resource DLL on this node.
0x00001449 -4294962103 Error_Invalid_Showwin_Command Cannot show or remove the window in the way specified
0x00001633 -4294961613 NULL
0x000017C7 -4294961209 NULL
0x000017D2 -4294961198 NULL
0x000018BE -4294960962 NULL
0x00001AD4 -4294960428 NULL
0x00001ADA -4294960422 NULL
0x00001C70 -4294960016 NULL
0x00001CE8 -4294959896 NULL
0x00001D7A -4294959750 NULL
0x00001F1D -4294959331 NULL
0x00001F59 -4294959271 NULL
0x00002075 -4294958987 NULL
0x0000229A -4294958438 NULL
0x000022CA -4294958390 NULL
0x0000230B -4294958325 NULL
0x00002685 -4294957435 NULL
0x000028A5 -4294956891 NULL
0x00002ABF -4294956353 NULL
0x00002BBE -4294956098 NULL
0x00002D49 -4294955703 NULL
0x00002DA4 -4294955612 NULL
0x00002DDC -4294955556 NULL
0x00002EBD -4294955331 NULL
0x00002ED7 -4294955305 NULL
0x000032D8 -4294954280 NULL
0x000035DD -4294953507 NULL
0x000036F8 -4294953224 NULL
0x000037A1 -4294953055 NULL
0x000037FA -4294952966 NULL
0x0000384E -4294952882 NULL
0x000038F5 -4294952715 NULL
0x0000399D -4294952547 NULL
0x00003A5C -4294952356 NULL
0x00003D16 -4294951658 NULL
0x00003E44 -4294951356 NULL
0x00004016 -4294950890 NULL
0x000040CF -4294950705 NULL
0x00004146 -4294950586 NULL
0x000041F4 -4294950412 NULL
0x0000433D -4294950083 NULL
0x000043F9 -4294949895 NULL
0x000044CC -4294949684 NULL
0x0000471E -4294949090 NULL
0x00004808 -4294948856 NULL
0x00004910 -4294948592 NULL
0x00004966 -4294948506 NULL
0x00004A65 -4294948251 NULL
0x00004BF9 -4294947847 NULL
0x00004CC2 -4294947646 NULL
0x00004D2D -4294947539 NULL
0x00004DB8 -4294947400 NULL
0x00004E90 -4294947184 NULL
0x00004FA2 -4294946910 NULL
0x00005112 -4294946542 NULL
0x000051CF -4294946353 NULL
0x00005249 -4294946231 NULL
0x00005299 -4294946151 NULL
0x0000530C -4294946036 NULL
0x000053C4 -4294945852 NULL
0x00005492 -4294945646 NULL
0x00005542 -4294945470 NULL
0x0000556E -4294945426 NULL
0x000055BC -4294945348 NULL
0x00005636 -4294945226 NULL
0x00005812 -4294944750 NULL
0x00005844 -4294944700 NULL
0x000058F7 -4294944521 NULL
0x00005A6A -4294944150 NULL
0x00005AA5 -4294944091 NULL
0x00005C0E -4294943730 NULL
0x00005FE9 -4294942743 NULL
0x00006056 -4294942634 NULL
0x0000626E -4294942098 NULL
0x000062B6 -4294942026 NULL
0x0000651F -4294941409 NULL
0x000065AA -4294941270 NULL
0x000065BA -4294941254 NULL
0x00006F50 -4294938800 NULL
0x00007052 -4294938542 NULL
0x00007190 -4294938224 NULL
0x00007617 -4294937065 NULL
0x00007747 -4294936761 NULL
0x00007865 -4294936475 NULL
0x00007B86 -4294935674 NULL
0x00007C12 -4294935534 NULL
0x00007C78 -4294935432 NULL
0x00007CE1 -4294935327 NULL
0x00007D12 -4294935278 NULL
0x00007DFF -4294935041 NULL
0x00007EC9 -4294934839 NULL
0x00007F83 -4294934653 NULL
0x00007FCC -4294934580 NULL
0x0000F06A -4294905750 NULL
0x0000F06B -4294905749 NULL
0x0000F0DA -4294905638 NULL
0x00240001 -4292607999 WU_S_SERVICE_STOP WindowsUpdate Windows Update Agent was stopped successfully
0x00240002 -4292607998 WU_S_SELFUPDATE Windows Update Agent updated itself
0x00240003 -4292607997 WU_S_UPDATE_ERROR Overall operation completed but error occurred while processing one or more specified updates.
0x00240004 -4292607996 WU_S_MARKED_FOR_DISCONNECT The caller attempted to disconnect an operation but the operation is busy calling back so the callback is marked for disconnect later
0x00240005 -4292607995 WU_S_REBOOT_REQUIRED The system needs to be rebooted to complete installation.
0x00240006 -4292607994 SUS_S_ALREADY_INSTALLED The update to be installed is already installed
0x00240007 -4292607993 WU_S_ALREADY_UNINSTALLED The update to be removed is not installed on the system
0x00240008 -4292607992 WU_S_ALREADY_DOWNLOADED The update to be downloaded is already downloaded
0x80000007 -2147483641 E_ABORT
0x80004001 -2147467263 E_NOTIMPL
0x80004002 -2147467262 E_NOINTERFACE No such interface supported
0x80004003 -2147467261 E_Pointer Invalid pointer
0x80004004 -2147467260 E_ABORT Operation Aborted
0x80004005 -2147467259 E_Fail
0x80004015 -2147467243 CO_E_WRONG_SERVER_IDENTITY The security descriptor on the BITS service was changed by a security template such that NetworkService account doesn’t have READ access to BITS service.
0x80008201 2147516929 E_NO_SPACE_IN_CACHE Out of cache space
0x80008202 2147516930 E_CACHE_TOO_SMALL Cache size is smaller than requested content’s size.
0x8000FFFF -2147418113 E_UNEXPECTED
0x80010100 -2147417856 RPC_E_SYS_CALL_FAILED
0x80010105 -2147417851 RPC_E_Serverfault
0x80010108 -2147417848 RPC_E_Disconnected
0x80040154 -2147221164 REGDB_E_CLASSNOTREG / [SA fail if SWD not working] createInstance failed for UpdateServiceManager Class not registered / BITS in Windows 2000 is dependent on SENS and EventSystem services. If COM+ catalog is corrupted, one of these errors
was seen.
0x800401F3 -2147221005 CO_E_Classstring
0x800401FD -2147220995 CO_E_Objnotconnected Object is not connected to server
0x80040206 -2147220986 EVENT_E_INTERNALERROR There will be event messages in Application/System log regarding the errors.
0x80040600 2147747328 E_FAIL_POLICY_NOT_FOUND Scan Tool Policy not found
0x80040602 2147747330 E_LOCATION_TIMEOUT Out of cache space
0x80040603 2147747331 E_SCANTOOL_POLICY_REMOVED The ScanTool Policy has been removed so cannot complete Scan Operation.
0x80040604 2147747332 E_SCANTOOL_NOTFOUND_INJOBQUEUE The ScanTool was not found in the job queue.
0x80040605 2147747333 E_FAIL_SCAN_TOOL_REMOVED Scan Tool has been Removed
0x80040606 2147747334 E_FAIL_OFFLINE_SCAN_HISTORY_NOT_FOUND Scan Tool Policy not found
0x80040607 2147747335 E_CONTENT_NOT_FOUND Out of cache space
0x80040608 2147747336 E_INVALID_INSTANCE_TYPE Out of cache space
0x80040668 -2147219864 E_INVALIDSTATE_AFTER_APPLY Software update still detected as actionable after apply.
0x80040692 -2147219822 Group Policy conflict Group Policy conflict
0x80040693 -2147219821 Low WUA version Low WUA version
0x80040700 2147747584 E_UPDDEPLOY_APPLY_NOT_ALLOWED Install not allowed
0x80040701 2147747585 E_UPDDEPLOY_DOWNLOAD_NOT_ALLOWED Download not allowed
0x80040702 2147747586 E_ASSIGNMENT_POLICY_NOT_FOUND Assignment policy not available
0x80040703 2147747587 E_ANOTHER_JOB_IN_PROGRESS Only one job is allowed at a time
0x80040704 2147747588 E_HARDREBOOT_PENDING Only one job is allowed at a time.
0x80040705 2147747589 E_PAUSE_STATE_REQUIRED Pause state required
0x80040706 2147747590 E_NO_ACTIVE_JOB No active job exists (while reconnect called).
0x80040707 2147747591 E_JOB_ID_MISMATCH Job Id mismatch (while reconnect called).
0x80040708 2147747592 E_UPDDEPLOY_APPLY_NOT_REQUIRED Software Updates Install not required.
0x80040709 2147747593 E_MONITOR_RESUME_FAILURE Failed to resume the monitoring of the process.
0x8004070A 2147747594 E_INVALID_CMDLINE Invalid command line
0x8004070B 2147747595 E_CREATEPROCESS_FAILURE Failed to create process
0x8004070C 2147747596 E_EXECUTION_TIMEOUT Software update execution timeout
0x8004070C -2147219700 E_EXECUTION_TIMEOUT Software update execution timeout
0x8004070D 2147747597 E_UPDATE_FAILED_RESULT Software update failed when attempted
0x8004070D -2147219699 ERROR_INAVILD_ENVIROMENT Software update failed when attempted.
0x8004070E 2147747598 E_EMPTY_COMMANDLINE Empty command line specified
0x8004070F 2147747599 E_INVALID_INSTALLER_PATH Invalid updates installer path
0x80040710 2147747600 E_COMPARE_CREATION_TIMES Failed to compare process creation time.
0x80040711 2147747601 E_DEPLOYMENT_NOT_ACTIVE Software updates deployment not active yet for example, start time is in future
0x80040712 2147747602 E_UPDDEPLOY_REBOOT_REQUIRED A system restart is required to complete the installation.
0x80040713 2147747603 E_NO_DETECT_RESULT Software updates detection results not received yet.
0x80040714 2147747604 E_UPDATES_USERINSTALL_RESTART_PENDING User based install not allowed as system restart is pending.
0x80040715 2147747605 E_USERINSTALL_NO_UPDATES No applicable updates specified in user install request.
0x80070001 -2147024895 ERROR_INVALID_FUNCTION
0x80070002 -2147024894 ERROR_FILE_NOT_FOUND The System cannot find the file specified
0x80070003 -2147024893 COR_E_DIRECTORYNOTFOUND The specified path couldn’t be found — ALLUSERSPROFILE Microsoft network dir doesn’t exist
0x80070003 -2147024893 ERROR_PATH_NOT_FOUND The system cannot find the path specified.
0x80070005 -2147024891 ERROR_ACCESS_DENIED or E_ACCESS_DENIED The authentication method is not supported. — CoCreateInstance(IBackgroundCopyManager) fails with E_ACCESSDENIED (0x80070005) in this condition
0x80070006 -2147024890 E_Handle Handle not valid error
0x80070008 -2147024888 ERROR_NOT_ENOUGH_MEMORY The system is out of memory.
0x8007000B -2147024885 COR_E_BADIMAGEFORMAT The format of the DLL or executable being loaded is invalid
0x8007000D -2147024883 The data is invalid.* The data is invalid.*
0x8007000E -2147024882 E_OUTOFMEMORY
0x8007000E -2147024882 [DCOM belly up] CAgent::CreateJob failed Not enough storage is available to complete this operation.
0x80070017 -2147024873 ERROR_CRC Data error (cyclic redundancy check).
0x8007001F -2147024865 ERROR_GEN_FAILURE A device attached to the system is not functioning
0x80070020 -2147024864 STIERR_SHARING_VIOLATION The process cannot access the file because it is being used by another process
0x80070032 -2147024846 ERROR_NOT_SUPPORTED
0x80070050 -2147024816 ERROR_FILE_EXISTS The file exists
0x80070052 -2147024814 ERROR_CANNOT_MAKE The directory or file cannot be created
0x80070057 -2147024809 ERROR_INVALID_PARAMENTER — E_INVALIDARG One or more arguments are not valid error — Invalid proxy server name was specified in the user’s IE settings and hence WinhttpSetProxySettings call fails with E_INVALIDARG error. BITS puts the
job in TRANSIENT_ERROR with the same error code. For ex, if the proxy server is set to http://foo/bar/proxy.pac, this error will be seen. This error is also seen when credentials are supplied such that scheme is not NTLM/Negotiate, but username/password is
NULL, since that is not valid (WinhttpSetCredentials fails with E_INVALIDARG. BITS 1.5 puts the job into ERROR state with BG_E_INVALID_RESPONSE in the above 2 cases, because of error code mapping E_INVALIDARG is always mapped to (BG_E_INVALID_SERVER_RESPONSE)
0x80070070 -2147024784 ERROR_DISK_FULL There is not enough space on the disk
0x8007007A -2147024774 ERROR_INSUFFICIENT_BUFFER
0x8007007B -2147024773 STIERR_INVALID_DEVICE_NAME
0x8007007E -2147024770 ERROR_MOD_NOT_FOUND The specified module could not be found.
0x8007007F -2147024769 ERROR_PROC_NOT_FOUND The specified procedure could not be found.
0x80070080 -2147024768 ERROR_WAIT_NO_CHILDREN There are no child processes to wait for
0x800700A1 -2147024735 ERROR_BAD_PATHNAME
0x800700B6 -2147024714 ERROR_INVALID_ORDINAL
0x800700C1 -2147024703 ERROR_BAD_EXE_FORMAT is not a valid Win32 application
0x800700E7 -2147024665 Error_Pipe_Busy All pipe instances are busy
0x80070103 -2147024637 ERROR_NO_MORE_ITEMS:
0x8007010B -2147024629 ERROR_DIRECTORY The directory name is invalid
0x8007012E -2147024594 Error_Disk_Too_Fragmented
0x800701E7 -2147024409 Error_Invalid_Address
0x800703e3 -2147023901 Error_Operation_Aborted The I/O operation has been aborted because of either a thread exit or an application request
0x800703e5 -2147023899 ERROR_IO_PENDING
0x800703E6 -2147023898 Error_Noaccess to memory location Invalid access to memory location
0x800703E7 -2147023897 Error_Swaperror Error performing inpage operation
0x800703EB -2147023893 Error_Can_Not_Complete Cannot complete this function
0x800703Ed -2147023891 ERROR_UNRECOGNIZED_VOLUME The volume does not contain a recognized file system
0x800703F0 -2147023888 ERROR_NO_TOKEN An attempt was made to reference a token that does not exist
0x8007041D -2147023843 ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control request in a timely fashion
0x8007041E -2147023842 Error_Service_No_Thread A thread could not be created for this service
0x8007041F -2147023841 ERROR_SERVICE_DATABASE_LOCKED The service database is locked
0x80070422 -2147023838 ERROR_SERVICE_DISABLED The service cannot be started. If BITS service is disabled by the Administrator, then this error will be seen.
0x80070424 -2147023836 ERROR_SERVICE_DOES_NOT_EXIST Due to a bug in BITS 1.5 OOB setup, after BITS 1.5 install, the BITS service is deleted, but the 1.5 install returns success code. BITS 1.5 binaries are copied to the machine, but the service doesn’t exist.
This can also happen if the BITS service is explicitly deleted by running the command sc delete bits
0x80070426 -2147023834 ERROR_SERVICE_NOT_ACTIVE The service has not been started
0x8007042B -2147023829 ERROR_PROCESS_ABORTED
0x8007042C -2147023828 Error_Service_Dependency_Fail
0x80070433 -2147023821 ERROR_SERVICE_DEPENDENCY_DELETED BITS service has a dependency on lanmanworkstation service in BITS 1.0 and 1.2. If “Client for Microsoft networks” network component is uninstalled, then lanmanworkstation service is deleted, but BITS
dependency will still be present. After that, BITS service fails to start
0x80070437 -2147023817 Error_Different_Service_Account
0x8007043B -2147023813 ERROR_SERVICE_NOT_IN_EXE The executable program that this service is configured to run does not implement the service. netsvcs registry value in HKLMSoftwareMicrosoftWindowsNTCurrentVersionSvchost registry key should contain the
service names that can be run in that service host. On XP and Windows 2003, BITS should be in this value. If “BITS” is missing from that value, then ERROR_SERVICE_NOT_IN_EXE error is seen when attempting to start the service
0x8007045A -2147023782 ERROR_DLL_INIT_FAILED
0x8007045B -2147023781 ERROR_SHUTDOWN_IN_PROGRESS
0x80070490 -2147023728 E_PROP_ID_UNSUPPORTED Permission denied / [Problem initializing or using session variables] or Element not found
0x800704C7 -2147023673 ERROR_CANCELLED Cancelled by user
0x800704DD -2147023651 Error_Not_Logged_On to network
0x80070502 -2147023614 Error_Stack_Buffer_Overrun The system detected an overrun of a stack-based buffer in this application
0x80070570 -2147023504 ERROR_FILE_CORRUPT
0x8007057F -2147023489 Error_Cannot_Find_WND_Class Cannot find windows class
0x8007058D -2147023475 Error_Control_ID_Not_Found
0x800705AA -2147023446 ERROR_NO_SYSTEM_RESOURCE Insufficient system resources exist to complete the requested service
0x800705AD -2147023443 Error_Working_Set_Quota Insufficient quota to complete the requested service
0x800705AF -2147023441 ERROR_COMMITMENT_LIMIT The paging file is too small for this operation to complete
0x800705B4 -2147023436 ERROR_TIMEOUT This operation returned because the timeout period expired.
0x8007064 -2147023293 ERROR_INSTALL_FAILURE Generic failure code from Windows Installer installs.
0x80070643 -2147023293 ERROR_INSTALL_FAILURE
0x80070652 -2147023278 ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress
0x8007066A -2147023254 Error_Patch_Target_Not_Found The program to be upgraded may be missing or the patch may upgrade a different version of the program
0x8007066F -2147023249 ERROR_PATCH_NOT_APPLIED Can sometimes happen when Windows Installer configuration for an installed application is out of sequence for example, Windows Installer thinks it has more patches applied than is really the case (this sometimes
used to happen with roaming profiles).
0x800706A6 -2147023194 RPC_S_Invalid_Binding Terminal Services optional component is installed on the machine, but the “Terminal Services” service has been disabled.
0x800706B5 -2147023179 RPC_S_Unknown_IF Eventlog service is not running. BITS tries to initialize the event logger object during initialization and fails to start, if the initialization fails. If event log service is not running, then the initialization fails
with RPC_S_UNKNOWN_IF error
0x800706BA -2147023174 RPC_S_SERVER_UNAVAILABLE
0x800706BB -2147023173 RPC_S_SERVER_TOO_BUSY The RPC server is too busy to complete this operation
0x800706BE -2147023170 RPC_S_CALL_FAILED
0x800706BF -2147023169 PRC_S_Call_Failed_DNE
0x800706C6 -2147023162 RPC_S_Invalid_Bound The array bounds are invalid
0x800706F7 -2147023113 RPC_X_Bad_Stub_Data This can occur after a control selfupdate that has not fully completed and requires a reboot. The controls may need to be reregistered.
0x80070704 -2147023100 Error_Unknown_Port
0x80070BC2 -2147021886 ErrorControlRebootRequired
0x8007276b -2147014805 WSASYSNOTREADY The description of WSASYSNOTREADY says WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. It seems that something is wrong with networking
components on the system.
0x8007277B -2147014789 WSASYSCALLFAILURE A system call that should never fail has failed
0x80072AF9 -2147013895 WSAHOST_NOT_FOUND
0x80072AFC -2147013892 WSANO_DATA
0x80072EE2 -2147012894 ERROR_INTERNET_TIMEOUT The request has timed out.
0x80072EE4 -2147012892 ERROR_INTERNET_INTERNAL_ERROR An internal error has occurred.
0x80072EE5 -2147012891 Error_Internet_Invalid_URL
0x80072EE6 -2147012890 ERROR_INTERNET_UNRECOGNIZED_SCHEME The URL scheme could not be recognized or is not supported.
0x80072EE7 -2147012889 ERROR_INTERNET_NAME_NOT_RESOLVED The server name could not be resolved.
0x80072EEF -2147012881 ERROR_INTERNET_LOGIN_FAILURE
0x80072EF1 -2147012879 ERROR_INTERNET_OPERATION_CANCELLED
0x80072EF2 -2147012878 Error_Internet_Incorrect_handle_type
0x80072EF3 -2147012877 Error_Internet_Incorrect_Handle_State
0x80072EFD -2147012867 ERROR_WINHTTP_CANNOT_CONNECT or ERROR_INTERNET_CANNOT_CONNECT The attempt to connect to the server failed. / Internet cannot connect
0x80072EFE -2147012866 ERROR_INTERNET_CONNECTION_ABORTED The connection with the server has been terminated.
0x80072F0C -2147012852 Error_Internet_Client_Auth_Cert_Needed
0x80072F0D -2147012851 ERROR_INTERNET_INVALID_CA
0x80072F76 -2147012746 ERROR_HTTP_HEADER_NOT_FOUND The requested header could not be located
0x80072F78 -2147012744 ERROR_HTTP_INVALID_SERVER_RESPONSE The server response could not be parsed.
0x80072F7c -2147012740 ERROR_HTTP_REDIRECT_FAILED
0x80072F83 -2147012733 ERROR_INTERNET_DISCONNECTED
0x80072F8c -2147012724 ERROR_INTERNET_NOT_INITIALIZED
0x80072F8F -2147012721 ERROR_INTERNET_SECURE_FAILURE ErrorClockWrong One or more errors were found in the Secure Sockets Layer (SSL) certificate sent by the server.
0x800736B1 -2147010895 Error_SXS_Cant_gen_Actctx This application has failed to start because the application configuration is incorrect.
0x8007F001 -2146963455 STATUS_FAILED_LANGUAGE_TYPE Setup cannot update your files because the languageinstalled on your system is different from the update language.
0x8007F002 -2146963454 STATUS_CHECKED_FREE_MISMATCH Setup cannot update a checked (debug) system with a free (retail) version of , or vice versa.
0x8007F003 -2146963453 STATUS_NOT_ENOUGH_SPACE There is not enough disk space on to install . Setup requires a minimum of d additional megabytes of free space or if you also want to archive the files for uninstall, Setup requires d additional megabytes of free
space. Free additional sp
0x8007F004 -2146963452 STATUS_INSUFFICIENT_PRIVS You do not have permission to update . Please contact your system administrator.
0x8007F007 -2146963449 STATUS_CANT_FIND_INF Setup could not find the update.inf file needed to update your system.
0x8007F008 -2146963448 STATUS_UPDATE_SUCCESSFUL has been updated. Remove any disks from the floppy disk drives and choose OK to restart your computer. If you change or add any components to your system, you will need to reapply the Hotfix.
0x8007F009 -2146963447 STATUS_UPDATE_UNSUCCESSFUL installation did not complete.
0x8007F00a -2146963446 STATUS_SHUTDOWN_UNSUCCESSFUL Setup was unable to shutdown system. Please shutdown your system manually.
0x8007F00B -2146963445 STATUS_FILE_NOT_FOUND_IN_SETUP_LOG Could not locate entry for HAL.DLL in SETUP.LOG to determine type of HAL to update.
0x8007F00C -2146963444 STATUS_INVALID_INF_FILE The file is not correct.
0x8007F00d -2146963443 STATUS_USER_CANCELLED Setup canceled.
0x8007F00E -2146963442 STATUS_PLATFORM_MISMATCH This is for a different hardware platform.
0x8007F00f -2146963441 STR_CAPTION Setup
0x8007F010 -2146963440 STR_WARNCAPTION Setup Warning
0x8007F011 -2146963439 STR_ERRCAPTION Setup Error
0x8007F012 -2146963438 STR_FAILED_TO_DELETE_OR_RENAME The file is open or in use by another application. Close all other applications and then click Retry.
0x8007F013 -2146963437 STR_FAILED_TO_SAVE_REGISTRY Setup could not backup registry key to file
0x8007F014 -2146963436 STR_FAILED_TO_READ_REGISTRY Setup could not backup registry value
0x8007F015 -2146963435 STR_ASK_DIRTY_UNINSTALL Select »OK» to undo the changes that have been made, or select »Cancel» to quit. If you select »Cancel», your system will be left in a partially updated state and may not work correctly.
0x8007F016 -2146963434 STR_LEAVING_DIRTY has been partially updated and may not work properly.
0x8007F017 -2146963433 STR_ARE_YOU_SURE_CANCEL Are you sure you want to cancel?
0x8007F018 -2146963432 STR_SOURCE_MEDIA_NAME_UNINSTALL Uninstall Directory
0x8007F019 -2146963431 STR_SOURCE_MEDIA_NAME Uninstall Directory
0x8007F01a -2146963430 STR_SOURCE_MEDIA_NAME_SYSTEM System Files
0x8007F01b -2146963429 STR_INST_HOTFIX Setup found hotfixes on your system. Would you like to install these hotfixes now?
0x8007F01c -2146963428 STR_UNINST_ALREADY_CREATED You have already created an Uninstall directory. Doing this again will overwrite your current uninstall directory. Are you sure you want to do this?
0x8007F01d -2146963427 STR_OEM_FILE Your computer vendor installed this file on your computer. Do you want Setup to replace this file?
0x8007F01e -2146963426 STR_CATALOG_INSTALL_FAILED Failed to install catalog files.
0x8007F01f -2146963425 STR_ADD_REGISTRY_FAILED Failed to add registry entry.
0x8007f020 -2146963424 STATUS_BUILD_VERSION_MISMATCH Setup has detected that the build version of the system installed does not match the update you are applying to it. You can only install this update only on Build %d .
0x8007f021 -2146963423 STATUS_SP_VERSION_GREATER The version of Windows you have installed does not match the update you are trying to install.
0x8007f022 -2146963422 STATUS_CANT_SPAWN_HOTFIX Setup could not start the hotfix installation program.
0x8007f023 -2146963421 STATUS_CANT_FIND_TAG Setup could not locate the files.
0x8007f024 -2146963420 STATUS_OVERWRITE_UNINSTALL WARNING: You have chosen to overwrite your existing uninstall: If you continue, you will only be able to uninstall to the following Service Pack version: Are you sure you want to continue? Click Yes to continue
creating the
0x8007f026 -2146963418 STATUS_WININET_LOAD_FAILED This Web-based update requires Internet Explorer 3.0 or later. For instructions on how to download a version of this update that does not require a Web connection during installation, download and install from
http://www.Microsoft.com/Downloads
0x8007f027 -2146963417 STATUS_CANT_INSTALL_SP_ON_DTC This has not been qualified by your hardware vendor for installation on this copy of Datacenter Server. Please contact your hardware vendor for additional information on obtaining a that has been qualified
for your system configuration.
0x8007f028 -2146963416 STATUS_NECESSARY_FILES_NOT_PRESENT Not all files necessary to perform an integrated installation are present.
0x8007f029 -2146963415 STATUS_SPOOLER_NOT_STARTED Cannot install . The Print Spooler service is not started.
0x8007f02a -2146963414 STATUS_MUST_RESTART_FIRST The system must be restarted before installing the , to allow some prior file update operations to complete. (These operations were previously scheduled by some other install or uninstall operation.)
0x8007f02b -2146963413 STATUS_NOT_ENOUGH_WITH_UNINST You do not have enough free disk space on % to archive the uninstall files. To install with backup files for uninstall, an additional dMB is required.
0x8007f02c -2146963412 STATUS_CANT_FIND_RSAENHS Unable to locate RSAENHS.DLL in the update directory, high encryption for uninstall aborted.
0x8007f02d -2146963411 STATUS_CANT_FIND_ENCININF Unable to locate UPDENCIN.INF in the update directory, high encryption for uninstall aborted.
0x8007f02e -2146963410 STATUS_CANT_FIND_ENCTSINF Unable to locate UPDENCTS.INF in the update directory, unable to export TS files.
0x8007f02f -2146963409 STATUS_ENCINST_PROCESS_FAILED High encryption ENCINST process failed.
0x8007f030 -2146963408 STATUS_ENCINST_UPGRADE_FAILED High encryption upgrade failed.
0x8007f031 -2146963407 STR_USAGE_UPDATE AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart] [/forcerestart] [/l] [/n] [/o] [/f] [/integrate:<path>] [/d:<path>] /help Displays this message SETUP MODES /quiet Quiet mode (no user interaction
or displ
0x8007f032 -2146963406 STR_BUILDING_CAB Creating file
0x8007f033 -2146963405 STR_DOWNLOADING Downloading files and patches
0x8007f034 -2146963404 STR_ARCHIVING_FILES Backing up files
0x8007f035 -2146963403 STR_ARCHIVING_FILE Backing up files
0x8007f036 -2146963402 STR_INSTALLING_FILES Installing files
0x8007f037 -2146963401 STR_INSTALLING_FILE Installing files
0x8007f038 -2146963400 STR_FINISHING_INSTALL Finishing installation
0x8007f039 -2146963399 STR_WELCOME_LINE Welcome to the Setup Wizard
0x8007f03a -2146963398 STR_RESTART &Restart
0x8007f03b -2146963397 STR_COMPLETE installation is complete. You must restart your computer for the update to take effect.
0x8007f03d -2146963395 STR_CANT_CANCEL_NOW Please wait while Setup updates your system files.
0x8007f03e -2146963394 STR_MUST_ACCEPT_TIP Must accept license agreement before installing
0x8007f03f -2146963393 STR_NEED_TO_CONNECT Setup needs to connect to the internet now to download files and patches for installation.
0x8007f040 -2146963392 STR_READY_TO_REPLACE Setup is ready to begin replacing system files.
0x8007f041 -2146963391 STR_CONNECTING Connecting to
0x8007f042 -2146963390 STR_CONNECTED Connected to
0x8007f043 -2146963389 STR_ESTIMATE estimate
0x8007f044 -2146963388 STR_MINUTES minutes
0x8007f045 -2146963387 STR_SECONDS seconds
0x8007f046 -2146963386 STR_DOWNLOAD_REMAINING KB remaining
0x8007f047 -2146963385 STR_DOWNLOAD_COMPLETE Download complete
0x8007f048 -2146963384 STR_DOWNLOAD_UNPACKING Download complete, now unpacking files
0x8007f049 -2146963383 STR_DOWNLOAD_FAILURE The following error occurred while Setup attempted to download the files from the Internet:
0x8007f04a -2146963382 STR_UNKNOWN_ERROR The server did not respond (error code %d).
0x8007f04b -2146963381 STR_INTERNET_TIMEOUT The server did not respond.
0x8007f04c -2146963380 STR_DOWNLOAD_RETRY_TEXT If this error persists after you have clicked Retry several times, download and install from http://www.Microsoft.com/Downloads. This will give you instructions on how to download a version of this update that
does not require a Web connection during
0x8007f04d -2146963379 STR_HASH_FAILURE_1 Setup determined that the following downloaded file is corrupt:
0x8007f04e -2146963378 STR_HASH_FAILURE_2 Setup determined that the following downloaded files are corrupt:
0x8007f04f -2146963377 STR_DOWNLOAD_GIVE_UP Setup was unable to download all the files necessary for installation.
0x8007f050 -2146963376 STR_COPYING_FILE_DELAYED Copied file (delayed)
0x8007f051 -2146963375 STR_ERROR_COPY_SLIP An error has occurred copying files from the Service Pack share to the distribution share.
0x8007f052 -2146963374 STR_SLIPSTREAM_SUCCESSFUL Integrated install has completed successfully.
0x8007f053 -2146963373 STR_SLIPSTREAM_FAILED Failed to copy some or all of the files necessary for integrated install. Please check that: a) No network or copy errors occurred during the integration process b) The format of the destination directory is correct.
The files to be integrated
0x8007f054 -2146963372 STR_SVCPACK_CMD Service Pack started with following command line
0x8007f055 -2146963371 STR_DOWNLOAD_SIZE bytes downloaded.
0x8007f056 -2146963370 STR_NO_SVCPACK No Service Pack
0x8007f057 -2146963369 STR_MISSING_FILE The file is missing from the installation. The file must be present for Setup to continue. Press OK to cancel Setup.
0x8007f058 -2146963368 STR_READY_TO_ENCINST Setup is ready to begin upgrade of uninstall to high encryption.
0x8007f059 -2146963367 STR_SLIPSTREAM_LANGUAGE_MISMATCH Integrated install failed. The language type or platform for the destination directory and must be the same.
0x8007f05a -2146963366 STATUS_CANT_OPEN_LOG Error opening file
0x8007f05b -2146963365 STR_SKIPPING_FILE Skipped copying file:
0x8007f05c -2146963364 STR_COPY_FILE Copying file
0x8007f05d -2146963363 STR_SVC_INFO In order to successfully complete this installation, the following services will automatically be stopped and re-started.
0x8007f05e -2146963362 STR_SVC_STOP_ERR Setup was unable to stop the following service
0x8007f05f -2146963361 STR_SVC_ASKREBOOT A reboot will probably be required in order to successfully complete this installation. Do you wish to continue?
0x8007f060 -2146963360 STR_SVC_START_ERR Setup was unable to re-start the following service: .
0x8007f061 -2146963359 ERR_STD_PREFIX Setup encountered an error:
0x8007f062 -2146963358 STR_COPYING_FILE Copied file:
0x8007f063 -2146963357 STR_SPAWNING_PROCESS Starting process:
0x8007f064 -2146963356 STATUS_INVALID_VER_FILE The update.ver file is not correct.
0x8007f065 -2146963355 STR_DOMESTIC_TAG1 US/Canada Only, Not for Export
0x8007f066 -2146963354 STR_DOMESTIC_TAG2 Domestic Use Only
0x8007f067 -2146963353 STR_DOMESTIC_TAG3 US and Canada Use Only
0x8007f06a -2146963350 STATUS_SP_VERSION_GREATER_1 Setup has detected that the Service Pack version of the system installed is newer than the update you are applying to it. You can only install this update on Service Pack.
0x8007f06b -2146963349 STATUS_SP_VERSION_GREATER_2 Setup has detected that the Service Pack version of this system is newer than the update you are applying. There is no need to install this update.
0x8007f06c -2146963348 STATUS_FPNW_FIXUP_FAILED Setup failed to access or correctly modify your SETUP.LOG file.
0x8007f06d -2146963347 STATUS_WRONG_PLATFORM The version of software you are running does not match the system you are running it on.
0x8007f06e -2146963346 STATUS_FAILURE_COPYING_FILES Failed to completely copy all of the updated files.
0x8007f06f -2146963345 STATUS_FAILED_TO_SET_DIR Failed to set the directory.
0x8007f070 -2146963344 STATUS_SETUP_ERROR An error in updating your system has occurred.
0x8007f075 -2146963339 STATUS_SUCCESS_NOREBOOT has been updated. You must reboot for these changes to take effect. If you change or add any components to your system, you will need to reapply the Hotfix.
0x8007f076 -2146963338 STATUS_SP_VERSION_LESSER Setup has detected that the version of the Service Pack installed on your system is lower than what is necessary to apply this hotfix. At minimum, you must have Service Pack installed.
0x8007f078 -2146963336 STATUS_NO_UNINSTALL_AVAILABLE You cannot uninstall, since an uninstall for has not been created.
0x8007f07a -2146963334 STATUS_SUCCESS_NOREBOOTNEC has been updated. If you change or add any components to your system, you will need to reapply the Hotfix.
0x8007f07b -2146963333 STATUS_UNINST_NOREBOOTNEC Hotfix successfully uninstalled.
0x8007f07c -2146963332 STR_SECURITY_PROVIDER_WARNING The existing file contains High Encryption security, but the updated Hotfix file contains only Standard Encryption security. You can choose to replace the High Encryption security file with the updated Standard
Encryption security file now.
0x8007f07f -2146963329 STR_UNINST_HOTFIX Hotfixes have been found on your system. Would you like to Uninstall these hotfixes now?
0x8007f080 -2146963328 STR_OLD_UNINST_EXISTS An old Uninstall directory has been found. Would you like to overwrite this directory with new Uninstall information?
0x8007f081 -2146963327 STR_LICENSE_DECLINED You have chosen to decline the License Agreement. Setup cannot continue.
0x8007f082 -2146963326 STR_NO_LICENSE_TXT No LICENSE.TXT file was found in your Hotfix directory. Setup cannot continue.
0x8007f083 -2146963325 STR_INSUFF_RESOURCES Insufficient resources are available. Setup cannot continue.
0x8007f084 -2146963324 STR_FILE_READ_ERROR Error reading LICENSE.TXT file. Setup cannot continue.
0x8007f085 -2146963323 STR_DELETE_OLD_UNINST This old uninstall directory cannot be used to uninstall this Hotfix, and should be deleted. Would you like to delete it now?
0x8007f086 -2146963322 STR_HOTFIXES_FOUND The following hotfixes are installed:
0x8007f087 -2146963321 STR_HOTFIXES_NOT_FOUND No Hotfixes are installed.
0x8007f088 -2146963320 STR_CAT_VERSIONS_EQUAL Catalog file versions are equal, although catalog files differ. Install package must be rebuilt. Failed to install catalog file.
0x8007f089 -2146963319 STR_WINDOWS_TYPE1 Windows NT 4.0
0x8007f08a -2146963318 STR_WINDOWS_TYPE2 Windows 2000
0x8007f08b -2146963317 STR_LICENSE_AGREEMENT License Agreement
0x8007f08c -2146963316 STR_SELECT_OPTIONS Select Options
0x8007f08d -2146963315 STR_UPDATING_YOUR_SYSTEM Updating Your System
0x8007f08e -2146963314 STR_WIZ1_STATIC3 Before you install this update, we recommend that you: — Update your system repair disk — Back up your system — Close all open programs To complete this installation, Windows might require restarting after you finish
this wizard.
0x8007f08f -2146963313 STR_WIZ2_STATIC1 Please read the following license agreement. To continue with setup, you must accept the agreement.
0x8007f090 -2146963312 STR_WIZ2_RADIO1 I &Do Not Agree
0x8007f091 -2146963311 STR_WIZ2_RADIO2 I &Agree
0x8007f092 -2146963310 STR_ASK_BACKUP If you want to remove later, Setup must archive the necessary files. However, this requires significant disk space. Do you want Setup to archive these files?
0x8007f093 -2146963309 STR_ARCHIVE1 &Archive Files
0x8007f094 -2146963308 STR_ARCHIVE2 &Do Not Archive Files
0x8007f095 -2146963307 STR_WIZ4_STATIC2 Please wait while setup inspects your current configuration, archives your current files and updates your files.
0x8007f096 -2146963306 STR_WIZ4_STATIC_OPERATION Inspecting your current configuration
0x8007f097 -2146963305 STR_WIZ4_STATIC_DETAILS inspecting current configuration, archives your current files and updates your files
0x8007f098 -2146963304 STR_WIZ4_STATIC Inspecting current configuration, archives your current files and updates your files
0x8007f099 -2146963303 STR_WIZ5_STATIC1 Completing the Setup Wizard
0x8007f09a -2146963302 STR_WIZ5_STATIC2_REBOOT You have successfully completed the Setup Wizard. To apply the changes, the wizard has to restart Windows. To restart Windows automatically, click Finish. If you want to restart later, select the Do not restart
now check box, and then click Fin
0x8007f09b -2146963301 STR_WIZ5_STATIC2_NOREBOOT You have successfully completed the Setup Wizard. To close this wizard, click Finish.
0x8007f09c -2146963300 STR_WIZ5_CHECK1 &Do not restart now
0x8007f09d -2146963299 STR_WIZCAPTION Setup Wizard
0x8007f09e -2146963298 STR_ANALYZE_DISK Checking for necessary space
0x8007f09f -2146963297 STR_BUILDING_CAB_CAPTION Creating Cabinets
0x8007f0a0 -2146963296 STR_CLEAN_REG Updating the registry keys
0x8007f0a1 -2146963295 STR_CANCEL Cancel
0x8007f0a2 -2146963294 STR_DOWNLOAD_UNPACKING_DETAILS Unpacking: %d remaining
0x8007f0a3 -2146963293 STR_NO No LICENSE.TXT file was found in your Hotfix directory. Setup cannot continue. ::No Uninstall directory: Setup is executing. Please wait for Setup to complete :No Service Pack
0x8007f0a4 -2146963292 STR_README Read Me:readmesp.htm
0x8007f0a5 -2146963291 STR_README_FILE readmesp.htm
0x8007f0a6 -2146963290 STR_SLIPSTREAM_EVAL_DESTINATION Integrated install failed. The destination directory contains an evaluation copy of Windows.
0x8007f0a7 -2146963289 STR_WINDOWS_TYPE3 Windows XP
0x8007f0a8 -2146963288 STR_NOUNINSTALL No Uninstall directory
0x8007f0a9 -2146963287 STR_SRVPACK Service Pack
0x8007f0aa -2146963286 STR_WINDOWS_TYPE0 Windows
0x8007f0ab -2146963285 STR_SPOOLER_ENABLE For Setup to continue, the print spooler service must be enabled on this computer. To enable this service, click OK. After Setup is complete, the print spooler will be disabled.
0x8007f0ac -2146963284 STR_USAGE_UPDATE_NOSLPSTRM AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart] [/forcerestart] [/l] [/n] [/o] [/f] [/integrate:<fullpath>] /help Displays this message SETUP MODES /quiet Quiet mode (no user interaction
or display)
0x8007f0ad -2146963283 STR_FONT Verdana Bold
0x8007f0ae -2146963282 STR_CHOOSE_UNINST_DIR Select an existing folder or make a new folder in which to store uninstall information.
0x8007f0af -2146963281 STR_ARCHIVE_DRIVE_INVALID You have selected a folder that is not on your local computer. The current state of the computer can be archived only on your local computer.
0x8007f0b0 -2146963280 STR_STARTING_SERVICES Starting services
0x8007f0b1 -2146963279 STR_STARTING_SERVICE Starting service
0x8007f0b2 -2146963278 STR_STOPPING_SERVICES Stopping services
0x8007f0b3 -2146963277 STR_STOPPING_SERVICE Stopping services
0x8007f0b4 -2146963276 STR_WINDOWS_TYPE4 Windows Server 2003
0x8007f0c0 -2146963264 STR_BLOCKLIST_HF_MSG Setup cannot install this hotfix because one or more of its files are out of date. Please download and install the latest version of fix .
0x8007f0c1 -2146963263 STR_BLOCKLIST_SP_MSGA This service pack contains files that are missing some of the fixes which were previously installed on this computer. To prevent possible problems, these files will not be installed by the service pack.
0x8007f0c2 -2146963262 STR_BLOCKLIST_SP_MSGB In order to have the fixes contained in both the service pack and the previously installed hotfixes, you must obtain and install the updated versions of the following hotfixes prior to or following the service pack
installation. These hotfixes are also
0x8007f0c3 -2146963261 STR_BLOCKLIST_SP_MSGC Do you want to continue installing this service pack?
0x8007f0c4 -2146963260 STR_BLOCKLIST_SP_MSGD The service pack install cannot continue until these hotfixes are applied to your system.
0x8007f0c5 -2146963259 STR_GENERALCAPTION 2%
0x8007f0c6 -2146963258 STATUS_BUILD_VERSION_MISMATCH2 Setup has detected that the build version of the system installed does not match the update you are applying to it. You can only install this update only on Build %d .
0x8007f0c7 -2146963257 STR_SLPSTRM_COPY Integrating files
0x8007f0c8 -2146963256 STR_SLPSTRM_WIZ4_STATIC2 Please wait while setup integrates files from Windows Service Pack into your Windows installation folder.
0x8007f0c9 -2146963255 STR_SLPSTRMUPDATING_YOUR_SYSTEM Updating Your Windows Share
0x8007f0ca -2146963254 STR_RESTORE_POINT_DESC Installed .
0x8007f0cb -2146963253 STATUS_VLK_BLOCKED The Product Key used to install Windows is invalid. Please contact your system administrator or retailer immediately to obtain a valid Product Key. You may also contact Microsoft Corporation’s Anti-Piracy Team by emailing
piracy@microsoft.com
0x8007f0cc -2146963252 STATUS_KERNEL_NONSTD The core system file (kernel) used to start this computer is not a Microsoft Windows file. The Service Pack will not be installed. For more information, see Knowledge Base article at http://support.microsoft.com.
0x8007f0cd -2146963251 STR_VLK_CHECK Checking product key
0x8007f0ce -2146963250 STR_SET_RESTOREPOINT Creating restore point
0x8007f0cf -2146963249 STR_PERFORM_INVENTORY Performing inventory
0x8007f0d0 -2146963248 STR_BUILD_THIRDPARTYDRIVERS Creating Third Party Driver List
0x8007f0d1 -2146963247 STR_DISK_USAGEFORINSTALL Estimating space for installation
0x8007f0d2 -2146963246 STR_DISK_USAGEFORUNINSTALL Estimating space for uninstallation
0x8007f0d3 -2146963245 STR_PROCESSES_BEFOREARCHIVE Running processes before install
0x8007f0d4 -2146963244 STR_REGISTRY_BACKUP Backing up registry
0x8007f0d5 -2146963243 STR_PROCESSES_AFTERINSTALL Running processes after install
0x8007f0d6 -2146963242 STR_PERFORM_CLEANUP Performing cleanup
0x8007f0d7 -2146963241 STR_OPTIONAL_EXCLUSIONWARNING Windows has detected that one or more protected files on your computer have been modified. The Service Pack contains updated versions of those files, which work to provide a stable environment for your programs.
If you click Yes, the updated version
0x8007f0d8 -2146963240 STR_WIZ1_STATIC3_XP Before you install this update, we recommend that you: — Back up your system — Close all open programs To complete this installation, Windows might require restarting after you finish this wizard.
0x8007f0d9 -2146963239 STR_ARCHIVE_FOLDER_INVALID The folder name is longer than the limit of 226 bytes. Enter a shorter name.
0x8007f0da -2146963238 STR_FAILED_INF_INTEGRITY Setup could not verify the integrity of the file Update.inf. Make sure the Cryptographic service is running on this computer.
0x8007f0db -2146963237 STR_BLOCKLIST_FIXNUMBER Fix Number
0x8007f0dc -2146963236 STR_BLOCKLIST_FILENAME File Name
0x8007f0dd -2146963235 STR_BLOCKLIST_VERSION Version
0x8007f0de -2146963234 STR_WIZ4_NOARCHIVE Please wait while setup inspects your current configuration and updates your files.
0x8007f0df -2146963233 STATUS_SP_BUILD_TO_BUILD This Service Pack cannot be installed on top of the build currently installed on your computer. Cancel this installation process, uninstall your current build, then re-install this Service Pack.
0x8007f0e0 -2146963232 STR_UNABLE_TO_VERIFY Setup could not verify the integrity of one or more installed files.
0x8007f0e2 -2146963230 STR_ERR_PRINT_EULA Unable to print the END USER LICENSE AGREEMENT
0x8007f0e3 -2146963229 STR_WINDOWS_TYPE Windows, Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2000, Windows XP Version 2003
0x8007f0e4 -2146963228 STATUS_WINDOWS_VERSION_NEWER The version of Windows you have installed is newer than the update you are trying to install. There is no need to install this update.
0x8007f0e5 -2146963227 STATUS_PACKAGE_NOT_APPLICABLE This package does not apply to the operating system you are running, and therefore cannot be installed.
0x8007f0e6 -2146963226 STR_SAFEMODE_INSTALL You are trying to install while the system is in safe mode. This is not recommended unless the system does not function in normal mode.
0x8007f0e7 -2146963225 STR_APPLYING_HOTPATCHES Applying Hotpatches
0x8007f0e8 -2146963224 STATUS_INVALID_BRANCHES_INF The branches.inf file is invalid.
0x8007f0e9 -2146963223 STATUS_INVALID_UPDATEBR_INF The updatebr.inf file is invalid.
0x8007f0ea -2146963222 STR_PACKAGE_MIGRATE_FAILED Failed to migrate dependent packages.
0x8007f0ec -2146963220 STR_PERFORM_MIGRATION Performing migration
0x8007f0ed -2146963219 STATUS_NO_BRANCH_AVAILABLE Required installation branch was not found in INF file.
0x8007f0ee -2146963218 STR_BLOCKLIST_PACKAGE Package
0x8007f0ef -2146963217 STR_MIGRATE_BLOCKLIST_MSG The installation cannot continue because the following packages might not be valid:
0x8007f0f0 -2146963216 STR_BRANCH_CAPTION Branch info
0x8007f0f1 -2146963215 STATUS_INCOMPARABLE_BRANCHES Files from the package are incompatible with files on your system.
0x8007f0f2 -2146963214 STR_MIGRATE_BLOCKLIST_REC Reinstall the packages listed above, and then install .
0x8007f0f3 -2146963213 STR_UNKNOWN_PACKAGE Unknown
0x8007f0f4 -2146963212 STATUS_PREREQUISITE_FAILED Setup cannot continue because one or more pre-requisites required to install failed. For More details check the Log File. Update.exe can throw this error when it starts to download if the computer is running
under battery power (there may be a fix for this in the future).
0x8007f0f5 -2146963211 STR_WINDOWS_TYPE5 Windows XP Version 2003
0x8007F0F5 -2146963211 WU_E_DM_INCORRECTFILEHASH The WU Agent’s metadata store and the policy received by ccmexec could be out of sync.
0x8007F0F6 -2146963212 ERROR INVALID PARAMETER Failed to start the installation of updates because update is not found
0x8007f0f7 -2146963209 STR_HFSLP_ERROR An error occurred while attempting to integrate this software update package. Verify that the architecture, language, and service pack level of this software update are valid for the target distribution folder.
0x8007f0f8 -2146963208 STR_HFSLP_EXPRESS Express software update packages cannot be integrated. To download a version of the fix that can be integrated, visit http://www.microsoft.com/downloads.
0x8007f0f9 -2146963207 STR_HFSLP_EXTRACTED Extracted packages cannot be integrated. The /integrate switch must be used with the original software update package.
0x8007f0fa -2146963206 STR_HFSLP_NOTFOUND Setup was unable to locate the distribution folder that you wish to integrate with this software update package. The /integrate switch requires the full path to the distribution folder.
0x8007f200 -2146962944 STATUS_MORE_FILES_FOR_DOWNLOAD More byte ranges required.
0x8007f201 -2146962943 STATUS_READY_TO_INSTALL Required payload available, ready to install.
0x8007f202 -2146962942 STATUS_PATCH_NOT_FOUND The delta was not found in the PSF. Update cannot find information about how to upgrade this binary. SUS can terminate installation.
0x8007f203 -2146962941 STATUS_PATCH_FILE_CORRUPT Update cannot find information about how to upgrade this binary
0x8007f204 -2146962940 STATUS_INDEXFILE_CORRUPT Index file does not have a valid signature. Index file has an invalid signature. The package is corrupt. SUS can terminate installation.
0x8007f205 -2146962939 STR_UPDATE_ALREADY_RUNNING Setup has detected that another update is in progress. Please complete that installation or removal and try again.
0x8007f206 -2146962938 STATUS_RETRY_REFRESH_INVENTORY The state of machine changed since last inventory analysis. Update.exe has to restart the process with /si.
0x8007f207 -2146962937 STATUS_RETRY_SELF_CONTAINED Two consecutive attempts to download delta failed without any progress and there is no use in continuing as express package. Revert to self-contained package.
0x8007f220 -2146962912 STATUS_CONTINUE_INVENTORY error codes should not be returned out of update.exe
0x8007f221 -2146962911 ERROR_INDEXFILE_NOT_FOUND error codes should not be returned out of update.exe
0x80080005 -2146959355 CO_E_Server_Exec_Failure
0x80080008 -2146959352 CO_E_SERVER_STOPPING
0x80090006 -2146893818 NTE_Bad_Signature
0x8009000B -2146893813 NTE_Bad_Key_State
0x80090017 -2146893801 NTE_PROV_TYPE_NOT_DEF
0x8009001D -2146893795 Error_Write_Fault
0x80090305 -2146893051 SEC_E_SECPKG_NOT_FOUND The requested security package does not exist
0x80090331 -2146893007 Sec_E_Algorithm_Mismatch The client and the server cannot communicate, because they do not possess a common algorithm
0x8009033F -2146892993 SEC_E_Shutdown_IN_Progress
0x80092003 -2146885629 CRYPT_E_File_Error An error occurred while reading or writing to a file
0x8009200D -2146885619 Crypt_E_Bad_Msg Not a cryptographic message or the cryptographic message is not formatted correctly
0x80092026 -2146885594 Crypt_E_Security_Settings The cryptographic operation failed due to a local security option setting
0x80096001 -2146869247 TRUST_E_SYSTEM_ERROR A system-level error occurred while verifying trust.
0x80096002 TRUST_E_NO_SIGNER_CERT The certificate for the signer of the message is invalid or not found.
0x80096003 TRUST_E_COUNTER_SIGNER One of the counter signatures was invalid.
0x80096004 TRUST_E_CERT_SIGNATURE The signature of the certificate cannot be verified.
0x80096005 -2146869243 TRUST_E_TIME_STAMP The timestamp signature and/or certificate could not be verified or is malformed.
0x80096010 -2146869232 TRUST_E_BAD_DIGEST The digital signature of the object did not verify.
0x80096019 -2146869223 TRUST_E_BASIC_CONSTRAINTS A certificate’s basic constraint extension has not been observed.
0x8009601E TRUST_E_FINANCIAL_CRITERIA The certificate does not meet or contain the Authenticode(tm) financial extensions.
0x800A0046 -2146828218 CTL_PermissionDenied olectl.h
0x800A01AD -2146827859 ActiveX component can»t create object
0x800a01ae -2146827858 IXP_NNTP_NO_SUCH_ARTICLE_FOUND This can occur after a control selfupdate that has not fully completed and requires a reboot.
0x800a138f -2146823281 ERROR_RESOURCE_NOT_FOUND Javascript runtime error
0x800B0001 -2146762751 TRUST_E_PROVIDER_UNKNOWN Unknown trust provider.
0x800B0002 -2146762750 TRUST_E_ACTION_UNKNOWN The trust verification action specified is not supported by the specified trust provider.
0x800B0003 -2146762749 TRUST_E_SUBJECT_FORM_UNKNOWN The form specified by the subject is not one supported or known by the specified trust provider
0x800B0004 -2146762748 TRUST_E_SUBJECT_NOT_TRUSTED The subject is not trusted for the specified action.
0x800B0005 DIGSIG_E_ENCODE Error due to problem in ASN.1 encoding process.
0x800B0006 DIGSIG_E_DECODE Error due to problem in ASN.1 decoding process.
0x800B0007 DIGSIG_E_EXTENSIBILITY Reading / writing Extensions where Attributes are appropriate, and visa versa.
0x800B0008 DIGSIG_E_CRYPTO Unspecified cryptographic failure.
0x800B0009 PERSIST_E_SIZEDEFINITE The size of the data could not be determined.
0x800B000A PERSIST_E_SIZEINDEFINITE The size of the indefinite-sized data could not be determined.
0x800B000B PERSIST_E_NOTSELFSIZING This object does not read and write self-sizing data.
0x800B0100 -2146762496 TRUST_E_NOSIGNATURE No signature was present in the subject
0x800B0101 -2146762495 CERT_E_EXPIRED A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
0x800B0102 CERT_E_VALIDITYPERIODNESTING The validity periods of the certification chain do not nest correctly.
0x800B0103 CERT_E_ROLE A certificate that can only be used as an end-entity is being used as a CA or visa versa.
0x800B0104 CERT_E_PATHLENCONST A path length constraint in the certification chain has been violated.
0x800B0105 CERT_E_CRITICAL A certificate contains an unknown extension that is marked ‘critical’.
0x800B0106 CERT_E_PURPOSE A certificate being used for a purpose other than the ones specified by its CA.
0x800B0107 CERT_E_ISSUERCHAINING A parent of a given certificate in fact did not issue that child certificate.
0x800B0108 CERT_E_MALFORMED A certificate is missing or has an empty value for an important field, such as a subject or issuer name.
0x800B0109 -2146762487 CERT_E_UNTRUSTEDROOT A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider
0x800B010A CERT_E_CHAINING A certificate chain could not be built to a trusted root authority.
0x800B010B TRUST_E_FAIL Generic trust failure.
0x800B010C CERT_E_REVOKED A certificate was explicitly revoked by its issuer.
0x800b010d -2146762483 CERT_E_UNTRUSTEDTESTROOT The certification path terminates with the test root which is not trusted with the current policy settings.
0x800B010E CERT_E_REVOCATION_FAILURE The revocation process could not continue — the certificate(s) could not be checked.
0x800B010F CERT_E_CN_NO_MATCH The certificate’s CN name does not match the passed value.
0x800B0110 -2146762480 CERT_E_WRONG_USAGE The certificate is not valid for the requested usage.
0x800B0111 TRUST_E_EXPLICIT_DISTRUST The certificate was explicitly marked as untrusted by the user.
0x800B0112 CERT_E_UNTRUSTEDCA A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
0x800B0113 CERT_E_INVALID_POLICY The certificate has invalid policy.
0x800B0114 CERT_E_INVALID_NAME The certificate has an invalid name. The name is not included in the permitted list or is explicitly excluded.
0x800C0002 -2146697214 Inet_E_Invalid_URL Invalid URL.* Please verify that the specified URL exists and is correct.
0x800C0004 -2146697212 Server access failure.* The attempt to connect with the server failed. Please verify that the server is running and available. Server access failure.* The attempt to connect with the server failed. Please verify that the server is running
and available.
0x800C0006 -2146697210 File not found.* The file could not be found at the specified URL. Please make sure the URL is correct. File not found.* The file could not be found at the specified URL. Please make sure the URL is correct.
0x800C000B -2146697205 Server connection time-out.* The connection to the server timed out. Please verify that the server is running and available. Server connection time-out.* The connection to the server timed out. Please verify that the server is running
and available.
0x800C000E -2146697202 Server security access failure.* There was a security problem when accessing the server. Server security access failure.* There was a security problem when accessing the server.
0x800F0101 -2146500351 SPAPI_E_Section_Not_Found The required section was not found in the INF
0x800F020B -2146500085 SPAPI_E_No_Such_Devinst device instance does not exist
0x800F0217 -2146500073 SPAPI_E_Bad_Service_Installsect A service installation section in this INF is invalid
0x800F022B -2146500053 SPAPI_E_DI_Dont_Install The class installer has denied the request to install or upgrade this device
0x800F022F -2146500049 SPAPI_E_No_Catalog_for_OEM_INF The third-party INF does not contain digital signature information
0x800F0244 -2146500028 SPAPI_E_Signature_Osattribure_Mismatch The software was tested for compliance on a different version of Windows and may not be compatible with this version
0x800FF8F0 -2146436880 NULL
0x800FFBBE -2146436162 NULL
0x800FFC02 -2146436094 NULL
0x800FFC0D -2146436083 NULL
0x80190064 -2145845148 BG_E_HTTP_ERROR_100 The request can be continued.
0x80190065 -2145845147 BG_E_HTTP_ERROR_101 The server switched protocols in an upgrade header.
0x801900C8 -2145845048 BG_E_HTTP_ERROR_200 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again.
0x801900C9 -2145845047 BG_E_HTTP_ERROR_201 The request was fulfilled and resulted in the creation of a new resource.
0x801900CA -2145845046 BG_E_HTTP_ERROR_202 The request was accepted for processing, but the processing has not been completed yet.
0x801900CB -2145845045 BG_E_HTTP_ERROR_203 The returned metadata in the entity-header is not the definitive set available from the server of origin.
0x801900CC -2145845044 BG_E_HTTP_ERROR_204 The server has fulfilled the request, but there is no new information to send back.
0x801900CD -2145845043 BG_E_HTTP_ERROR_205 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again.
0x801900CE -2145845042 BG_E_HTTP_ERROR_206 The server fulfilled the partial GET request for the resource.
0x8019012C -2145844948 BG_E_HTTP_ERROR_300 The server could not return the requested data.
0x8019012D -2145844947 BG_E_HTTP_ERROR_301 The requested resource was assigned to a new permanent Uniform Resource Identifier (URI), and any future references to this resource should use one of the returned URIs.
0x8019012E -2145844946 BG_E_HTTP_ERROR_302 The requested resource was assigned a different Uniform Resource Identifier (URI). This change is temporary.
0x8019012F -2145844945 BG_E_HTTP_ERROR_303 The response to the request is under a different Uniform Resource Identifier (URI) and must be retrieved using a GET method on that resource.
0x80190130 -2145844944 BG_E_HTTP_ERROR_304 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again.
0x80190131 -2145844943 BG_E_HTTP_ERROR_305 The requested resource must be accessed through the proxy given by the location field.
0x80190133 -2145844941 BG_E_HTTP_ERROR_307 The URL has been temporarily relocated. Try again later.
0x80190190 -2145844848 BG_E_HTTP_ERROR_400 The server cannot process the request because the syntax is not valid.
0x80190191 -2145844847 BG_E_HTTP_ERROR_401 The requested resource requires user authentication.
0x80190192 -2145844846 BG_E_HTTP_ERROR_402 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again.
0x80190193 -2145844845 BG_E_HTTP_ERROR_403 The client does not have sufficient access rights to the requested server object. Cannot execute requested URL in the current application pool IIS returns this error in some transient error cases too such as 403.9
— Forbidden: Too many clients are trying to connect to the Web server.403.15 — Forbidden: Client access licenses have exceeded limits on the Web server.
0x80190194 -2145844844 BG_E_HTTP_ERROR_404 The requested URL does not exist on the server.
0x80190195 -2145844843 BG_E_HTTP_ERROR_405 The method used is not allowed.
0x80190196 -2145844842 BG_E_HTTP_ERROR_406 No responses acceptable to the client were found.
0x80190197 -2145844841 BG_E_HTTP_ERROR_407 Proxy authentication is required.
0x80190198 -2145844840 BG_E_HTTP_ERROR_408 The server timed out waiting for the request.
0x80190199 -2145844839 BG_E_HTTP_ERROR_409 The request could not be completed because of a conflict with the current state of the resource. The user should resubmit the request with more information.
0x8019019A -2145844838 BG_E_HTTP_ERROR_410 The requested resource is not currently available at the server, and no forwarding address is known.
0x8019019B -2145844837 BG_E_HTTP_ERROR_411 The server cannot accept the request without a defined content length.
0x8019019C -2145844836 BG_E_HTTP_ERROR_412 The precondition given in one or more of the request header fields evaluated to false when it was tested on the server.
0x8019019D -2145844835 BG_E_HTTP_ERROR_413 The server cannot process the request because the request entity is too large.
0x8019019E -2145844834 BG_E_HTTP_ERROR_414 The server cannot process the request because the request Uniform Resource Identifier (URI) is longer than the server can interpret.
0x8019019F -2145844833 BG_E_HTTP_ERROR_415 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again.
0x801901A1 -2145844831 BG_E_HTTP_ERROR_417 The server could not meet the expectation given in an Expect request-header field.
0x801901C1 -2145844799 BG_E_HTTP_ERROR_449 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again.
0x801901F4 -2145844748 BG_E_HTTP_ERROR_500 The server encountered an unexpected condition that prevented it from fulfilling the request.
0x801901F5 -2145844747 BG_E_HTTP_ERROR_501 The server does not support the functionality required to fulfill the request.
0x801901F6 -2145844746 BG_E_HTTP_ERROR_502 The server, while acting as a gateway or proxy to fulfill the request, received an invalid response from the upstream server it accessed.
0x801901F7 -2145844745 BG_E_HTTP_ERROR_503 The service is temporarily overloaded.
0x801901F8 -2145844744 BG_E_HTTP_ERROR_504 The request was timed out waiting for a gateway. Can typically be a DNS issue
0x801901F9 -2145844743 BG_E_HTTP_ERROR_505 The server does not support the HTTP protocol version that was used in the request message.
0x801901FA -2145844742 NULL
0x80194000 -2145828864 BITS_MC_JOB_CANCELLED The administrator canceled job on behalf of %3. The job ID was %1.
0x80194001 -2145828863 BITS_MC_FILE_DELETION_FAILED While canceling job, BITS was not able to remove the temporary files.
0x80194002 -2145828862 BITS_MC_FILE_DELETION_FAILED_MORE Due to space limitations, not all files are listed here. Check for additional files of the form BITxxx.TMP in the same directory.
0x80194003 -2145828861 BITS_MC_JOB_PROPERTY_CHANGE The administrator modified the property of job. The job ID was %1.
0x80194004 -2145828860 BITS_MC_JOB_TAKE_OWNERSHIP The administrator took ownership of job. The job ID was %1.
0x80194005 -2145828859 BITS_MC_JOB_SCAVENGED Job was canceled after being inactive for more than xx days. The job ID was %1.
0x80194006 -2145828858 BITS_MC_JOB_NOTIFICATION_FAILURE Job failed to notify its associated application. BITS will retry in xx minutes. The job ID was %1.
0x80194007 -2145828857 BITS_MC_STATE_FILE_CORRUPT The BITS job list is not in a recognized format. It may have been created by a different version of BITS. The job list has been cleared.
0x80194008 -2145828856 BITS_MC_FAILED_TO_START The BITS server failed to start. Try restarting the service at a later time.
0x80200001 -2145386495 BG_E_Not_Found The requested job was not found.
0x80200002 -2145386494 BG_E_INVALID_STATE The requested action is not allowed in the current job state. The job might have been canceled or completed transferring. It is in a read-only state now.
0x80200003 -2145386493 BG_E_EMPTY There are no files attached to this job. Attach files to the job, and then try again.
0x80200004 -2145386492 BG_E_FILE_NOT_AVAILABLE No file is available because no URL generated an error.
0x80200005 -2145386491 BG_E_PROTOCOL_NOT_AVAILABLE No protocol is available because no URL generated an error.
0x80200006 -2145386490 BG_S_ERROR_CONTEXT_NONE No errors have occurred.
0x80200007 -2145386489 BG_E_ERROR_CONTEXT_UNKNOWN The error occurred in an unknown location.
0x80200008 -2145386488 BG_E_ERROR_CONTEXT_GENERAL_QUEUE_MANAGER The error occurred in the Background Intelligent Transfer Service (BITS) queue manager.
0x80200009 -2145386487 BG_E_ERROR_CONTEXT_LOCAL_FILE The error occurred while the local file was being processed. Verify that the file is not in use, and then try again.
0x8020000A -2145386486 BG_E_ERROR_CONTEXT_REMOTE_FILE The error occurred while the local file was being processed. Verify that the file is not in use, and then try again.
0x8020000B -2145386485 BG_E_ERROR_CONTEXT_GENERAL_TRANSPORT The error occurred in the transport layer. The client could not connect to the server.
0x8020000C -2145386484 BG_E_ERROR_CONTEXT_QUEUE_MANAGER_NOTIFICATION The error occurred while the notification callback was being processed. Background Intelligent Transfer Service (BITS) will try again later.
0x8020000D -2145386483 BG_E_Destination_Locked The destination file system volume is not available. Verify that another program, such as CheckDisk, is not running, which would lock the volume. When the volume is available, Background Intelligent Transfer Service
(BITS) will try again.
0x8020000E -2145386482 BG_E_VOLUME_CHANGED The destination volume has changed. If the disk is removable, it might have been replaced with a different disk. Reinsert the original disk and resume the job.
0x8020000F -2145386481 BG_E_ERROR_INFORMATION_UNAVAILABLE No errors have occurred.
0x80200010 -2145386480 BG_E_NETWORK_DISCONNECTED There are currently no active network connections. Background Intelligent Transfer Service (BITS) will try again when an adapter is connected.
0x80200011 -2145386479 BG_E_MISSING_FILE_SIZE When BITS sends a HEAD request and server/proxy doesn’t return Content-Length header in the response, BITS puts the job in ERROR state with BG_E_MISSING_FILE_SIZE. BITS 1.5 puts the job in ERROR state with BG_E_INVALID_SERVER_RESPONSE
error. Apache 2.0 proxy server is known to exhibit this behavior.
0x80200012 -2145386478 BG_E_INSUFFICIENT_HTTP_SUPPORT The server does not support HTTP 1.1.
0x80200013 -2145386477 BG_E_INSUFFICIENT_RANGE_SUPPORT BITS uses range header in HTTP requests to request parts of a file. If the server or proxy doesn’t understand Range requests and returns full file instead of the requested range, BITS puts the job in ERROR
state. Apache 1.3 proxy is known to show this behavior if the requested file is already in the cache.
0x80200014 -2145386476 BG_E_REMOTE_NOT_SUPPORTED Background Intelligent Transfer Service (BITS) cannot be used remotely.
0x80200015 -2145386475 BG_E_NEW_OWNER_DIFF_MAPPING The drive mapping for the job is different for the current owner than for the previous owner. Use a UNC path instead.
0x80200016 -2145386474 BG_E_NEW_OWNER_NO_FILE_ACCESS The new owner has insufficient access to the local files for the job. The new owner might not have permissions to access the job files. Verify that the new owner has sufficient permissions, and then try again.
0x80200017 -2145386473 BG_S_PARTIAL_COMPLETE Some of the transferred files were deleted because they were incomplete
0x80200018 -2145386472 BG_E_PROXY_LIST_TOO_LARGE The HTTP proxy list cannot be longer than 32,000 characters. Try again with a shorter proxy list.
0x80200019 -2145386471 BG_E_PROXY_BYPASS_LIST_TOO_LARGE The HTTP proxy bypass list cannot be longer than 32,000 characters. Try again with a shorter bypass proxy list.
0x8020001A -2145386470 BG_S_UNABLE_TO_DELETE_FILES Some of the temporary files could not be deleted. Check the system event log for the complete list of files that could not be deleted.
0x8020001B -2145386469 BG_E_INVALID_SERVER_RESPONSE The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again.
0x8020001C -2145386468 BG_E_TOO_MANY_FILES No more files can be added to this job.
0x8020001D -2145386467 BG_E_LOCAL_FILE_CHANGED The local file was changed during the transfer. Recreate the job, and then try to transfer it again.
0x8020001E -2145386466 BG_E_ERROR_CONTEXT_REMOTE_APPLICATION The program on the remote server reported the error.
0x8020001F -2145386465 BG_E_SESSION_NOT_FOUND The specified session could not be found on the server. Background Intelligent Transfer Service (BITS) will try again.
0x80200020 -2145386464 BG_E_TOO_LARGE The job is too large for the server to accept. This job might exceed a job size limit set by the server administrator. Reduce the size of the job, and then try again.
0x80200021 -2145386463 BG_E_STRING_TOO_LONG The specified string is too long.
0x80200022 -2145386462 BG_E_CLIENT_SERVER_PROTOCOL_MISMATCH The client and server versions of Background Intelligent Transfer Service (BITS) are incompatible.
0x80200023 -2145386461 BG_E_SERVER_EXECUTE_ENABLE Scripting OR execute permissions are enabled on the IIS virtual directory associated with the job. To upload files to the virtual directory, disable the scripting and execute permissions on the virtual directory.
0x80200024 -2145386460 BG_E_No_Progress BITS The job is not making headway. The server may be misconfigured. Background Intelligent Transfer Service (BITS) will try again later.
0x80200025 -2145386459 BG_E_USERNAME_TOO_LARGE The user name cannot be longer than 300 characters. Try again with a shorter name.
0x80200026 -2145386458 BG_E_PASSWORD_TOO_LARGE The password cannot be longer than 300 characters. Try again with a shorter password.
0x80200027 -2145386457 BG_E_INVALID_AUTH_TARGET The authentication target specified in the credentials is not defined.
0x80200028 -2145386456 BG_E_INVALID_AUTH_SCHEME The authentication scheme specified in the credentials is not defined.
0x80200029 -2145386455 BG_E_FILE_NOT_FOUND The specified file name does not match any of the files in the job.
0x8020002A -2145386454 BG_S_PROXY_CHANGED The proxy server was changed.
0x8020002B -2145386453 BG_E_INVALID_RANGE The requested byte range extends beyond the end of the web page. Use byte ranges that are wholly within the page.
0x8020002C -2145386452 BG_E_OVERLAPPING_RANGES The list of byte ranges contains some overlapping ranges, which are not supported.
0x8020002D -2145386451 BG_E_CONNECT_FAILURE A connection could not be established.
0x8020002E -2145386450 BG_E_CONNECTION_CLOSED The connection was prematurely closed.
0x8020002F -2145386449 BG_E_KEEP_ALIVE_FAILURE The connection for a request that specifies the Keep-alive header was closed unexpectedly.
0x80200030 -2145386448 BG_E_MESSAGE_LENGTH_LIMIT_EXCEEDED A message was received that exceeded the specified limit when sending a request or receiving a response from the server.
0x80200031 -2145386447 BG_E_NAME_RESOLUTION_FAILURE The host name could not be found.
0x80200032 -2145386446 BG_E_PENDING An internal asynchronous request is pending.
0x80200033 -2145386445 BG_E_PIPELINE_FAILURE
0x80200034 -2145386444 BG_E_PROTOCOL_ERROR The response received from the server was complete but indicated a protocol-level error.
0x80200035 -2145386443 BG_E_PROXY_NAME_RESOLUTION_FAILURE The proxy name could not be found.
0x80200036 -2145386442 BG_E_RECEIVE_FAILURE A complete response was not received from the server.
0x80200037 -2145386441 BG_E_REQUEST_CANCELED The request was canceled.
0x80200038 -2145386440 BG_E_SECURE_CHANNEL_FAILURE An error occurred while establishing a connection using SSL.
0x80200039 -2145386439 BG_E_SEND_FAILURE complete request could not be sent to the remote server.
0x8020003A -2145386438 BG_E_SERVER_PROTOCOL_VIOLATION The server response was not valid.
0x8020003B -2145386437 BG_E_TIMEOUT The operation exceeded the time limit.
0x8020003C -2145386436 BG_E_TRUST_FAILURE A server certificate could not be validated.
0x8020003D -2145386435 BG_E_UNKNOWN_ERROR A unknown error occured.
0x8020003E -2145386434 BG_E_BLOCKED_BY_POLICY Group Policy settings prevent background jobs from running at this time.
0x8020003F -2145386433 BG_E_INVALID_PROXY_INFO The supplied proxy server or bypass list is invalid.
0x80200040 -2145386432 BG_E_INVALID_CREDENTIALS The format of the supplied security credentials is invalid.
0x80240001 -2145124351 WU_E_NO_SERVICE Windows Update Agent was unable to provide the service.
0x80240002 -2145124350 WU_E_MAX_CAPACITY_REACHED The maximum capacity of the service was exceeded.
0x80240003 -2145124349 WU_E_UNKNOWN_ID An ID cannot be found.
0x80240004 -2145124348 WU_E_NOT_INITIALIZED The object could not be initialized.
0x80240005 -2145124347 WU_E_RANGEOVERLAP The update handler requested a byte range overlapping a previously requested range.
0x80240006 -2145124346 WU_E_TOOMANYRANGES The requested number of byte ranges exceeds the maximum number (2^31 — 1).
0x80240007 -2145124345 WU_E_INVALIDINDEX The index to a collection was invalid.
0x80240008 -2145124344 WU_E_ITEMNOTFOUND The key for the item queried could not be found.
0x80240009 -2145124343 WU_E_OPERATIONINPROGRESS Another conflicting operation was in progress. Some operations such as installation cannot be performed twice simultaneously.
0x8024000A -2145124342 WU_E_COULDNOTCANCEL Cancellation of the operation was not allowed.
0x8024000B -2145124341 WU_E_CALL_CANCELLED Operation was cancelled.
0x8024000C -2145124340 WU_E_NOOP No operation was required.
0x8024000D -2145124339 WU_E_XML_MISSINGDATA Windows Update Agent could not find required information in the update’s XML data.
0x8024000E -2145124338 WU_E_XML_INVALID Windows Update Agent found invalid information in the update’s XML data.
0x8024000F -2145124337 WU_E_CYCLE_DETECTED Circular update relationships were detected in the metadata.
0x80240010 -2145124336 WU_E_TOO_DEEP_RELATION Update relationships too deep to evaluate were evaluated.
0x80240011 -2145124335 WU_E_INVALID_RELATIONSHIP An invalid update relationship was detected.
0x80240012 -2145124334 WU_E_REG_VALUE_INVALID An invalid registry value was read.
0x80240013 -2145124333 WU_E_DUPLICATE_ITEM Operation tried to add a duplicate item to a list.
0x80240014 -2145124332 SUS_E_EE_INVALID_EXPRESSION an expression handler was passed an expression that is bad.
0x80240015 -2145124331 SUS_E_EE_MISSING_METADATA an expression handler was passed an expression that requires an applicability metadata blob, but did not receive one or received too many.
0x80240016 -2145124330 WU_E_INSTALL_NOT_ALLOWED Operation tried to install while another installation was in progress or the system was pending a mandatory restart.
0x80240017 -2145124329 WU_E_NOT_APPLICABLE Operation was not performed because there are no applicable updates.
0x80240018 -2145124328 WU_E_NO_USERTOKEN Operation failed because a required user token is missing.
0x80240019 -2145124327 WU_E_EXCLUSIVE_INSTALL_CONFLICT An exclusive update cannot be installed with other updates at the same time.
0x8024001A -2145124326 WU_E_POLICY_NOT_SET A policy value was not set.
0x8024001B -2145124325 WU_E_SELFUPDATE_IN_PROGRESS The operation could not be performed because the Windows Update Agent is self-updating.
0x8024001C -2145124324 SUS_E_WRONGMSIVERSION
0x8024001D -2145124323 WU_E_INVALID_UPDATE An update contains invalid metadata.
0x8024001E -2145124322 WU_E_SERVICE_STOP Operation did not complete because the service or system was being shut down.
0x8024001F -2145124321 WU_E_NO_CONNECTION Operation did not complete because the network connection was unavailable.
0x80240020 -2145124320 WU_E_NO_INTERACTIVE_USER Operation did not complete because there is no logged-on interactive user.
0x80240021 -2145124319 WU_E_TIME_OUT Operation did not complete because it timed out.
0x80240022 -2145124318 WU_E_ALL_UPDATES_FAILED Operation failed for all the updates.
0x80240023 -2145124317 WU_E_EULAS_DECLINED The license terms for all updates were declined.
0x80240024 -2145124316 WU_E_NO_UPDATE There are no updates.
0x80240025 -2145124315 WU_E_USER_ACCESS_DISABLED Group Policy settings prevented access to Windows Update.
0x80240026 -2145124314 WU_E_INVALID_UPDATE_TYPE The type of update is invalid.
0x80240027 -2145124313 WU_E_URL_TOO_LONG The URL exceeded the maximum length.
0x80240028 -2145124312 WU_E_UNINSTALL_NOT_ALLOWED The update could not be uninstalled because the request did not originate from a WSUS server.
0x80240029 -2145124311 WU_E_INVALID_PRODUCT_LICENSE Search may have missed some updates before there is an unlicensed application on the system.
0x8024002a -2145124310 WU_E_MISSING_HANDLER A component required for detecting applicable updates was missing.
0x8024002B -2145124309 WU_E_LEGACYSERVER An operation did not complete because it requires a newer version of server.
0x8024002C -2145124308 WU_E_BIN_SOURCE_ABSENT A delta-compressed update could not be installed because it required the source.
0x8024002D WU_E_SOURCE_ABSENT A full-file update could not be installed because it required the source.
0x8024002E -2145124306 WU_E_WU_DISABLED Access to an unmanaged server is not allowed.
0x8024002F -2145124305 WU_E_CALL_CANCELLED_BY_POLICY Operation did not complete because the DisableWindowsUpdateAccess policy was set.
0x80240030 -2145124304 WU_E_INVALID_PROXY_SERVER The format of the proxy list was invalid.
0x80240031 -2145124303 WU_E_INVALID_FILE The file is in the wrong format.
0x80240032 -2145124302 WU_E_INVALID_CRITERIA The search criteria string was invalid.
0x80240032 -2145124302 [Scan fails on x64vista] OnSearchComplete Failed to end search job [SMS] WU client failed Searching for update with error.
0x80240033 -2145124301 WU_E_EULA_UNAVAILABLE License terms could not be downloaded.
0x80240034 -2145124300 WU_E_DOWNLOAD_FAILED Update failed to download.
0x80240035 -2145124299 WU_E_UPDATE_NOT_PROCESSED INTERNAL ONLY: The update was not processed.
0x80240036 -2145124298 WU_E_INVALID_OPERATION The object’s current state did not allow the operation.
0x80240037 -2145124297 WU_E_NOT_SUPPORTED The functionality for the operation is not supported.
0x80240038 WU_E_WINHTTP_INVALID_FILE The downloaded file has an unexpected content type.
0x80240039 WU_E_TOO_MANY_RESYNC Agent is asked by server to resync too many times.
0x80240040 WU_E_NO_SERVER_CORE_SUPPORT WUA API method does not run on Server Core installation.
0x80240041 WU_E_SYSPREP_IN_PROGRESS Service is not available while sysprep is running.
0x80240042 WU_E_UNKNOWN_SERVICE The update service is no longer registered with AU.
0x80240FFF -2145120257 WU_E_UNEXPECTED An operation failed due to reasons not covered by another error code.
0x80241001 -2145120255 WU_E_MSI_WRONG_VERSION Search may have missed some updates because the Windows Installer is less than version 3.1.
0x80241002 -2145120254 WU_E_MSI_NOT_CONFIGURED Search may have missed some updates because the Windows Installer is not configured.
0x80241003 -2145120253 WU_E_MSP_DISABLED Search may have missed some updates because policy has disabled Windows Installer patching.
0x80241004 WU_E_MSI_WRONG_APP_CONTEXT An update could not be applied because the application is installed per-user.
0x80241FFF -2145116161 WU_E_MSP_UNEXPECTED Search may have missed some updates because there was a failure of the Windows Installer.
0x80242000 -2145116160 WU_E_UH_REMOTEUNAVAILABLE A request for a remote update handler could not be completed because no remote process is available.
0x80242001 -2145116159 WU_E_UH_LOCALONLY A request for a remote update handler could not be completed because the handler is local only.
0x80242002 -2145116158 WU_E_UH_UNKNOWNHANDLER A request for an update handler could not be completed because the handler could not be recognized.
0x80242003 -2145116157 WU_E_UH_REMOTEALREADYACTIVE A remote update handler could not be created because one already exists.
0x80242004 -2145116156 WU_E_UH_DOESNOTSUPPORTACTION support install (uninstall).A request for the handler to install (uninstall) an update could not be completed because the update does not
0x80242005 -2145116155 WU_E_UH_WRONGHANDLER An operation did not complete because the wrong handler was specified.
0x80242006 -2145116154 WU_E_UH_INVALIDMETADATA A handler operation could not be completed because the update contains invalid metadata.
0x80242007 -2145116153 WU_E_UH_INSTALLERHUNG An operation could not be completed because the installer exceeded the time limit.
0x80242008 -2145116152 WU_E_UH_OPERATIONCANCELLED An operation being done by the update handler was cancelled.
0x80242009 -2145116151 WU_E_UH_BADHANDLERXML An operation could not be completed because the handler-specific metadata is invalid.
0x8024200A -2145116150 WU_E_UH_CANREQUIREINPUT A request to the handler to install an update could not be completed because the update requires user input.
0x8024200B -2145116149 WU_E_UH_INSTALLERFAILURE The installer failed to install (uninstall) one or more updates.
0x8024200C -2145116148 WU_E_UH_FALLBACKTOSELFCONTAINED The update handler should download self-contained content rather than delta-compressed content for the update.
0x8024200D -2145116147 WU_E_UH_NEEDANOTHERDOWNLOAD The update handler did not install the update because it needs to be downloaded again.
0x8024200E -2145116146 WU_E_UH_NOTIFYFAILURE The update handler failed to send notification of the status of the install (uninstall) operation.
0x8024200F WU_E_UH_INCONSISTENT_FILE_NAMES The file names contained in the update metadata and in the update package are inconsistent.
0x80242010 WU_E_UH_FALLBACKERROR The update handler failed to fall back to the self-contained content.
0x80242011 WU_E_UH_TOOMANYDOWNLOADREQUESTS The update handler has exceeded the maximum number of download requests.
0x80242012 WU_E_UH_UNEXPECTEDCBSRESPONSE The update handler has received an unexpected response from CBS.
0x80242013 WU_E_UH_BADCBSPACKAGEID The update metadata contains an invalid CBS package identifier.
0x80242014 WU_E_UH_POSTREBOOTSTILLPENDING The post-reboot operation for the update is still in progress.
0x80242015 WU_E_UH_POSTREBOOTRESULTUNKNOWN The result of the post-reboot operation for the update could not be determined.
0x80242016 WU_E_UH_POSTREBOOTUNEXPECTEDSTATE The state of the update after its post-reboot operation has completed is unexpected.
0x80242017 WU_E_UH_NEW_SERVICING_STACK_REQUIRED The OS servicing stack must be updated before this update is downloaded or installed.
0x80242FFF -2145112065 WU_E_UH_UNEXPECTED An update handler error not covered by another WU_E_UH_* code.
0x80243001 WU_E_INSTALLATION_RESULTS_UNKNOWN_VERSION The results of download and installation could not be read from the registry due to an unrecognized data format version.
0x80243002 WU_E_INSTALLATION_RESULTS_INVALID_DATA The results of download and installation could not be read from the registry due to an invalid data format.
0x80243003 WU_E_INSTALLATION_RESULTS_NOT_FOUND The results of download and installation are not available; the operation may have failed to start.
0x80243004 WU_E_TRAYICON_FAILURE A failure occurred when trying to create an icon in the taskbar notification area.
0x80243FFD WU_E_NON_UI_MODE Unable to show UI when in non-UI mode; WU client UI modules may not be installed.
0x80243FFE WU_E_WUCLTUI_UNSUPPORTED_VERSION Unsupported version of WU client UI exported functions.
0x80243FFF -2145107969 WU_E_AUCLIENT_UNEXPECTED There was a user interface error not covered by another WU_E_AUCLIENT_* error code.
0x80244000 -2145107968 WU_E_PT_SOAPCLIENT_BASE WU_E_PT_SOAPCLIENT_* error codes map to the SOAPCLIENT_ERROR enum of the ATL Server Library.
0x80244001 -2145107967 WU_E_PT_SOAPCLIENT_INITIALIZE installation failure.Same as SOAPCLIENT_INITIALIZE_ERROR — initialization of the SOAP client failed, possibly because of an MSXML
0x80244002 -2145107966 WU_E_PT_SOAPCLIENT_OUTOFMEMORY Same as SOAPCLIENT_OUTOFMEMORY — SOAP client failed because it ran out of memory.
0x80244003 -2145107965 WU_E_PT_SOAPCLIENT_GENERATE Same as SOAPCLIENT_GENERATE_ERROR — SOAP client failed to generate the request.
0x80244004 -2145107964 WU_E_PT_SOAPCLIENT_CONNECT Same as SOAPCLIENT_CONNECT_ERROR — SOAP client failed to connect to the server.
0x80244005 -2145107963 WU_E_PT_SOAPCLIENT_SEND Same as SOAPCLIENT_SEND_ERROR — SOAP client failed to send a message for reasons of WU_E_WINHTTP_* error codes.
0x80244006 -2145107962 WU_E_PT_SOAPCLIENT_SERVER Same as SOAPCLIENT_SERVER_ERROR — SOAP client failed because there was a server error.
0x80244007 -2145107961 WU_E_PT_SOAPCLIENT_SOAPFAULT error codes.Same as SOAPCLIENT_SOAPFAULT — SOAP client failed because there was a SOAP fault for reasons of WU_E_PT_SOAP_*
0x80244008 -2145107960 WU_E_PT_SOAPCLIENT_PARSEFAULT Same as SOAPCLIENT_PARSEFAULT_ERROR — SOAP client failed to parse a SOAP fault.
0x80244009 -2145107959 WU_E_PT_SOAPCLIENT_READ Same as SOAPCLIENT_READ_ERROR — SOAP client failed while reading the response from the server.
0x8024400A -2145107958 WU_E_PT_SOAPCLIENT_PARSE Same as SOAPCLIENT_PARSE_ERROR — SOAP client failed to parse the response from the server.
0x8024400B -2145107957 WU_E_PT_SOAP_VERSION Same as SOAP_E_VERSION_MISMATCH — SOAP client found an unrecognizable namespace for the SOAP envelope.
0x8024400C -2145107956 WU_E_PT_SOAP_MUST_UNDERSTAND Same as SOAP_E_MUST_UNDERSTAND — SOAP client was unable to understand a header.
0x8024400D -2145107955 WU_E_PT_SOAP_CLIENT Same as SOAP_E_CLIENT — SOAP client found the message was malformed; fix before resending.
0x8024400E -2145107954 WU_E_PT_SOAP_SERVER Same as SOAP_E_SERVER — The SOAP message could not be processed due to a server error; resend later.
0x8024400F -2145107953 WU_E_PT_WMI_ERROR There was an unspecified Windows Management Instrumentation (WMI) error.
0x80244010 -2145107952 WU_E_PT_EXCEEDED_MAX_SERVER_TRIPS The number of round trips to the server exceeded the maximum limit.
0x80244011 -2145107951 WU_E_PT_SUS_SERVER_NOT_SET WUServer policy value is missing in the registry.
0x80244012 -2145107950 WU_E_PT_DOUBLE_INITIALIZATION Initialization failed because the object was already initialized.
0x80244013 -2145107949 WU_E_PT_INVALID_COMPUTER_NAME The computer name could not be determined.
0x80244014 -2145107948 WU_E_PT_INVALID_COMPUTER_LSID Cannot determine computer LSID.
0x80244015 -2145107947 WU_E_PT_REFRESH_CACHE_REQUIRED Server replied with InvalidCookie or ServerChanged Caller should refresh its internal state then repeat the call to Protocol Talker
0x80244016 -2145107946 WU_E_PT_HTTP_STATUS_BAD_REQUEST Same as HTTP status 400 — the server could not process the request due to invalid syntax.
0x80244017 -2145107945 WU_E_PT_HTTP_STATUS_DENIED Same as HTTP status 401 — the requested resource requires user authentication.
0x80244018 -2145107944 WU_E_PT_HTTP_STATUS_FORBIDDEN Same as HTTP status 403 — server understood the request, but declined to fulfill it.
0x80244019 -2145107943 WU_E_PT_HTTP_STATUS_NOT_FOUND Same as HTTP status 404 — the server cannot find the requested URI (Uniform Resource Identifier)
0x8024401A -2145107942 WU_E_PT_HTTP_STATUS_BAD_METHOD Same as HTTP status 405 — the HTTP method is not allowed.
0x8024401B -2145107941 WU_E_PT_HTTP_STATUS_PROXY_AUTH_REQ Same as HTTP status 407 — proxy authentication is required.
0x8024401C -2145107940 WU_E_PT_HTTP_STATUS_REQUEST_TIMEOUT Same as HTTP status 408 — the server timed out waiting for the request.
0x8024401D -2145107939 WU_E_PT_HTTP_STATUS_CONFLICT ce.Same as HTTP status 409 — the request was not completed due to a conflict with the current state of the resour
0x8024401E -2145107938 WU_E_PT_HTTP_STATUS_GONE Same as HTTP status 410 — requested resource is no longer available at the server.
0x8024401F -2145107937 WU_E_PT_HTTP_STATUS_SERVER_ERROR Same as HTTP status 500 — an error internal to the server prevented fulfilling the request.
0x80244020 -2145107936 WU_E_PT_HTTP_STATUS_NOT_SUPPORTED Same as HTTP status 500 — server does not support the functionality required to fulfill the request.
0x80244021 -2145107935 WU_E_PT_HTTP_STATUS_BAD_GATEWAY Same as HTTP status 502. The server, while acting as a gateway or proxy, received an invalid response from the upstream server it accessed in attempting to fulfill the request.
0x80244022 -2145107934 WU_E_PT_HTTP_STATUS_SERVICE_UNAVAIL Same as HTTP status 503 — the service is temporarily overloaded.
0x80244023 -2145107933 WU_E_PT_HTTP_STATUS_GATEWAY_TIMEOUT Same as HTTP status 504 — the request was timed out waiting for a gateway.
0x80244024 -2145107932 WU_E_PT_HTTP_STATUS_VERSION_NOT_SUP Same as HTTP status 505 — the server does not support the HTTP protocol version used for the request.
0x80244025 -2145107931 WU_E_PT_FILE_LOCATIONS_CHANGED Operation failed due to a changed file location; refresh internal state and resend.
0x80244026 -2145107930 WU_E_PT_REGISTRATION_NOT_SUPPORTED Operation failed because Windows Update Agent does not support registration with a non-WSUS server.
0x80244027 -2145107929 WU_E_PT_NO_AUTH_PLUGINS_REQUESTED The server returned an empty authentication information list.
0x80244028 -2145107928 WU_E_PT_NO_AUTH_COOKIES_CREATED Windows Update Agent was unable to create any valid authentication cookies.
0x80244029 -2145107927 WU_E_PT_INVALID_CONFIG_PROP A configuration property value was wrong.
0x8024402A -2145107926 WU_E_PT_CONFIG_PROP_MISSING A configuration property value was missing.
0x8024402B -2145107925 WU_E_PT_HTTP_STATUS_NOT_MAPPED The HTTP request could not be completed and the reason did not correspond to any of the WU_E_PT_HTTP_* errorcodes.
0x8024402C -2145107924 WU_E_PT_WINHTTP_NAME_NOT_RESOLVED Winhttp SendRequest/ReceiveResponse failed with 0x2ee7 error. Either the proxy server or target server name can not be resolved. Corresponding to ERROR_WINHTTP_NAME_NOT_RESOLVED. Stop/Restart service
or reboot the machine if you see this error frequently.
0x8024402F WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS External cab file processing completed with some errors.
0x80244030 WU_E_PT_ECP_INIT_FAILED The external cab processor initialization did not complete.
0x80244031 WU_E_PT_ECP_INVALID_FILE_FORMAT The format of a metadata file was invalid.
0x80244032 WU_E_PT_ECP_INVALID_METADATA External cab processor found invalid metadata.
0x80244033 WU_E_PT_ECP_FAILURE_TO_EXTRACT_DIGEST The file digest could not be extracted from an external cab file.
0x80244034 WU_E_PT_ECP_FAILURE_TO_DECOMPRESS_CAB_FILE An external cab file could not be decompressed.
0x80244035 WU_E_PT_ECP_FILE_LOCATION_ERROR External cab processor was unable to get file locations.
0x80244FFF -2145103873 WU_E_PT_UNEXPECTED A communication error not covered by another WU_E_PT_* error code.
0x80245001 -2145103871 WU_E_REDIRECTOR_LOAD_XML The redirector XML document could not be loaded into the DOM class.
0x80245002 -2145103870 WU_E_REDIRECTOR_S_FALSE The redirector XML document is missing some required information.
0x80245003 -2145103869 WU_E_REDIRECTOR_ID_SMALLER The redirectorId in the downloaded redirector cab is less than in the cached cab.
0x8024502D -2145103827 WU_E_PT_SAME_REDIR_ID Windows Update Agent failed to download a redirector cabinet file with a new redirectorId value from the server during the recovery.
0x8024502E -2145103826 WU_E_PT_NO_MANAGED_RECOVER A redirector recovery action did not complete because the server is managed.
0x80245FFF -2145099777 WU_E_REDIRECTOR_UNEXPECTED The redirector failed for reasons not covered by another WU_E_REDIRECTOR_* error code.
0x80246001 -2145099775 WU_E_DM_URLNOTAVAILABLE A download manager operation could not be completed because the requested file does not have a URL.
0x80246002 -2145099774 WU_E_DM_INCORRECTFILEHASH A download manager operation could not be completed because the file digest was not recognized.
0x80246003 -2145099773 WU_E_DM_UNKNOWNALGORITHM A download manager operation could not be completed because the file metadata requested an unrecognized hash algorithm.
0x80246004 -2145099772 WU_E_DM_NEEDDOWNLOADREQUEST An operation could not be completed because a download request is required from the download handler.
0x80246005 -2145099771 WU_E_DM_NONETWORK A download manager operation could not be completed because the network connection was unavailable.
0x80246006 -2145099770 WU_E_DM_WRONGBITSVERSION A download manager operation could not be completed because the version of Background Intelligent Transfer Service (BITS) is incompatible.
0x80246007 -2145099769 WU_E_DM_NOTDOWNLOADED The update has not been downloaded.
0x80246008 -2145099768 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed because the download manager was unable to connect the Background Intelligent Transfer Service (BITS).
0x80246009 -2145099767 WU_E_DM_BITSTRANSFERERROR A download manager operation failed because there was an unspecified Background Intelligent Transfer Service (BITS) transfer error.
0x8024600A WU_E_DM_DOWNLOADLOCATIONCHANGED A download must be restarted because the location of the source of the download has changed.
0x80246fff WU_E_DM_UNEXPECTED generic unexpected download manager failure
0x80247001 WU_E_OL_INVALID_SCANFILE An operation could not be completed because the scan package was invalid.
0x80247FFF WU_E_OL_UNEXPECTED Search using the scan package failed.
0x80248000 -2145091584 WU_E_DS_SHUTDOWN An operation failed because Windows Update Agent is shutting down.
0x80248001 -2145091583 WU_E_DS_INUSE An operation failed because the data store was in use.
0x80248002 -2145091582 WU_E_DS_INVALID The current and expected states of the data store do not match.
0x80248003 -2145091581 WU_E_DS_TABLEMISSING The data store is missing a table.
0x80248004 -2145091580 WU_E_DS_TABLEINCORRECT The data store contains a table with unexpected columns.
0x80248005 -2145091579 WU_E_DS_INVALIDTABLENAME A table could not be opened because the table is not in the data store.
0x80248006 -2145091578 WU_E_DS_BADVERSION The current and expected versions of the data store do not match.
0x80248007 -2145091577 WU_E_DS_NODATA The information requested is not in the data store.
0x80248008 -2145091576 WU_E_DS_MISSINGDATA The data store is missing required information or has a NULL in a table column that requires a non-null value.
0x80248009 -2145091575 WU_E_DS_MISSINGREF linked row.The data store is missing required information or has a reference to missing license terms, file, localized property or
0x8024800A -2145091574 WU_E_DS_UNKNOWNHANDLER The update was not processed because its update handler could not be recognized.
0x8024800B -2145091573 WU_E_DS_CANTDELETE The update was not deleted because it is still referenced by one or more services.
0x8024800C -2145091572 WU_E_DS_LOCKTIMEOUTEXPIRED The data store section could not be locked within the allotted time.
0x8024800D -2145091571 WU_E_DS_NOCATEGORIES The category was not added because it contains no parent categories and is not a top-level category itself.
0x8024800E -2145091570 WU_E_DS_ROWEXISTS The row was not added because an existing row has the same primary key.
0x8024800F -2145091569 WU_E_DS_STOREFILELOCKED The data store could not be initialized because it was locked by another process.
0x80248010 -2145091568 WU_E_DS_CANNOTREGISTER The data store is not allowed to be registered with COM in the current process.
0x80248011 -2145091567 WU_E_DS_UNABLETOSTART Could not create a data store object in another process.
0x80248012 -2145091566 SUS_E_DS_MISSINGFILEFORURL a file URL was passed in for a file that does not exist in the datastore
0x80248013 -2145091565 WU_E_DS_DUPLICATEUPDATEID The server sent the same update to the client with two different revision IDs.
0x80248014 -2145091564 WU_E_DS_UNKNOWNSERVICE An operation did not complete because the service is not in the data store.
0x80248015 -2145091563 WU_E_DS_SERVICEEXPIRED An operation did not complete because the registration of the service has expired.
0x80248016 -2145091562 WU_E_DS_DECLINENOTALLOWED ine.A request to hide an update was declined because it is a mandatory update or because it was deployed with a deadl
0x80248017 -2145091561 WU_E_DS_TABLESESSIONMISMATCH A table was not closed because it is not associated with the session.
0x80248018 -2145091560 WU_E_DS_SESSIONLOCKMISMATCH A table was not closed because it is not associated with the session.
0x80248019 -2145091559 WU_E_DS_NEEDWINDOWSSERVICE A request to remove the Windows Update service or to unregister it with Automatic Updates was declined because it is a built-in service and/or Automatic Updates cannot fall back to another service.
0x8024801A -2145091558 WU_E_DS_INVALIDOPERATION A request was declined because the operation is not allowed.
0x8024801B -2145091557 WU_E_DS_SCHEMAMISMATCH The schema of the current data store and the schema of a table in a backup XML document do not match.
0x8024801C -2145091556 WU_E_DS_RESETREQUIRED The data store requires a session reset; release the session and retry with a new session.
0x8024801D -2145091555 WU_E_DS_IMPERSONATED A data store operation did not complete because it was requested with an impersonated identity.
0x80248FFF -2145087489 WU_E_DS_UNEXPECTED A data store error not covered by another WU_E_DS_* code.
0x80249001 WU_E_INVENTORY_PARSEFAILED Parsing of the rule file failed.
0x80249002 WU_E_INVENTORY_GET_INVENTORY_TYPE_FAILED Failed to get the requested inventory type from the server.
0x80249003 WU_E_INVENTORY_RESULT_UPLOAD_FAILED Failed to upload inventory result to the server.
0x80249004 WU_E_INVENTORY_UNEXPECTED There was an inventory error not covered by another error code.
0x80249005 WU_E_INVENTORY_WMI_ERROR A WMI error occurred when enumerating the instances for a particular class.
0x8024A000 -2145083392 WU_E_AU_NOSERVICE Automatic Updates was unable to service incoming requests.
0x8024A001 -2145083391 SUS_E_AU_LEGACYSERVER
0x8024A002 -2145083390 WU_E_AU_NONLEGACYSERVER The old version of the Automatic Updates client has stopped because the WSUS server has been upgraded.
0x8024A003 -2145083389 WU_E_AU_LEGACYCLIENTDISABLED The old version of the Automatic Updates client was disabled.
0x8024A004 -2145083388 WU_E_AU_PAUSED Automatic Updates was unable to process incoming requests because it was paused.
0x8024A005 WU_E_AU_NO_REGISTERED_SERVICE No unmanaged service is registered with AU.
0x8024A008 WU_E_AU_OOBE_IN_PROGRESS
0x8024AFFF -2145079297 WU_E_AU_UNEXPECTED An Automatic Updates error not covered by another WU_E_AU * code.
0x8024C001 -2145075199 WU_E_DRV_PRUNED A driver was skipped.
0x8024C002 -2145075198 WU_E_DRV_NOPROP_OR_LEGACY A property for the driver could not be found. It may not conform with required specifications.
0x8024C003 -2145075197 WU_E_DRV_REG_MISMATCH The registry type read for the driver does not match the expected type.
0x8024C004 -2145075196 WU_E_DRV_NO_METADATA The driver update is missing metadata.
0x8024C005 -2145075195 WU_E_DRV_MISSING_ATTRIBUTE The driver update is missing a required attribute.
0x8024C006 -2145075194 WU_E_DRV_SYNC_FAILED Driver synchronization failed.
0x8024C007 -2145075193 WU_E_DRV_NO_PRINTER_CONTENT Information required for the synchronization of applicable printers is missing.
0x8024CFFF -2145071105 WU_E_DRV_UNEXPECTED A driver error not covered by another WU_E_DRV_* code.
0x8024D001 -2145071103 WU_E_SETUP_INVALID_INFDATA Windows Update Agent could not be updated because an INF file contains invalid information.
0x8024D002 -2145071102 WU_E_SETUP_INVALID_IDENTDATA Windows Update Agent could not be updated because the wuident.cab file contains invalid information.
0x8024D003 -2145071101 WU_E_SETUP_ALREADY_INITIALIZED Windows Update Agent could not be updated because of an internal error that caused setup initialization to be performed twice.
0x8024D004 -2145071100 WU_E_SETUP_NOT_INITIALIZED Windows Update Agent could not be updated because setup initialization never completed successfully.
0x8024D005 -2145071099 WU_E_SETUP_SOURCE_VERSION_MISMATCH Windows Update Agent could not be updated because the versions specified in the INF do not match the actual source file versions.
0x8024D006 -2145071098 WU_E_SETUP_TARGET_VERSION_GREATER Windows Update Agent could not be updated because a WUA file on the target system is newer than the corresponding source file.
0x8024D007 WU_E_SETUP_REGISTRATION_FAILED Windows Update Agent could not be updated because regsvr32.exe returned an error.
0x8024D008 WU_E_SELFUPDATE_SKIP_ON_FAILURE An update to the Windows Update Agent was skipped because previous attempts to update have failed.
0x8024D009 WU_E_SETUP_SKIP_UPDATE An update to the Windows Update Agent was skipped due to a directive in the wuident.cab file.
0x8024D00A WU_E_SETUP_UNSUPPORTED_CONFIGURATION Windows Update Agent could not be updated because the current system configuration is not supported.
0x8024D00B WU_E_SETUP_BLOCKED_CONFIGURATION Windows Update Agent could not be updated because the system is configured to block the update.
0x8024D00C WU_E_SETUP_REBOOT_TO_FIX Windows Update Agent could not be updated because a restart of the system is required.
0x8024D00D WU_E_SETUP_ALREADYRUNNING Windows Update Agent setup is already running.
0x8024D00E WU_E_SETUP_REBOOTREQUIRED Windows Update Agent setup package requires a reboot to complete installation.
0x8024D00F WU_E_SETUP_HANDLER_EXEC_FAILURE Windows Update Agent could not be updated because the setup handler failed during execution.
0x8024D010 WU_E_SETUP_INVALID_REGISTRY_DATA Windows Update Agent could not be updated because the registry contains invalid information.
0x8024D011 WU_E_SELFUPDATE_REQUIRED Windows Update Agent must be updated before search can continue.
0x8024D012 WU_E_SELFUPDATE_REQUIRED_ADMIN Windows Update Agent must be updated before search can continue. An administrator is required to perform the operation.
0x8024D013 WU_E_SETUP_WRONG_SERVER_VERSION Windows Update Agent could not be updated because the server does not contain update information for this version.
0x8024DFFF -2145067009 WU_E_SETUP_UNEXPECTED Windows Update Agent could not be updated because of an error not covered by another WU_E_SETUP_* error code.
0x8024E001 -2145067007 WU_E_EE_UNKNOWN_EXPRESSION An expression evaluator operation could not be completed because an expression was unrecognized.
0x8024E002 -2145067006 WU_E_EE_INVALID_EXPRESSION An expression evaluator operation could not be completed because an expression was invalid.
0x8024E003 -2145067005 WU_E_EE_MISSING_METADATA An expression evaluator operation could not be completed because an expression contains an incorrect number of metadata nodes.
0x8024E004 -2145067004 WU_E_EE_INVALID_VERSION An expression evaluator operation could not be completed because the version of the serialized expression data is invalid.
0x8024E005 -2145067003 WU_E_EE_NOT_INITIALIZED The expression evaluator could not be initialized.
0x8024E006 -2145067002 WU_E_EE_INVALID_ATTRIBUTEDATA An expression evaluator operation could not be completed because there was an invalid attribute.
0x8024E007 WU_E_EE_CLUSTER_ERROR An expression evaluator operation could not be completed because the cluster state of the computer could not be determined.
0x8024EFFF -2145062913 WU_E_EE_UNEXPECTED There was an expression evaluator error not covered by another WU_E_EE_* error code.
0x8024F001 -2145062911 WU_E_REPORTER_EVENTCACHECORRUPT The event cache file was defective.
0x8024F002 -2145062910 WU_E_REPORTER_EVENTNAMESPACEPARSEFAILED The XML in the event namespace descriptor could not be parsed.
0x8024F003 -2145062909 WU_E_INVALID_EVENT The XML in the event namespace descriptor could not be parsed.
0x8024F004 -2145062908 WU_E_SERVER_BUSY The server rejected an event because the server was too busy.
0x8024FFFF -2145058817 WU_E_REPORTER_UNEXPECTED There was a reporter error not covered by another error code.
0x87FF0001 -2013331455 Error_Label_Unreadable
0x87FF0004 -2013331452 Error_Too_Many_Open_Files The system can not open the file
0x8DDD0001 -1914896383 ErrorNoScripting
0x8DDD0002 -1914896382 ErrorNotAdmin
0x8DDD0003 -1914896381 ErrorDisabled Site timeout waiting for the control.
0x8DDD0004 -1914896380 ErrorControlFailed
0x8DDD0006 -1914896378 ErrorWin2KLessThanSP3
0x8DDD0007 -1914896377 ErrorRebootRequired
0x8DDD000F -1914896369 ErrorIis404
0x8DDD0010 -1914896368 ErrorIis500
0x8DDD0012 -1914896366 ErrorNoFrames
0x8DDD0018 -1914896360 ErrorAUDisabled AU could be disabled, not started etc. BITS could be disabled or not started etc.
0xC0000005 -1073741819 STATUS_ACCESS_VIOLATION
0xC0000006 -1073741818 STATUS_IN_PAGE_ERROR
0xc000001d -1073741795 STATUS_ILLEGAL_INSTRUCTION
0xc000001e -1073741794 STATUS_INVALID_LOCK_SEQUENCE
0xc0000090 -1073741680 STATUS_FLOAT_INVALID OPERATION
0xc0000096 -1073741674 STATUS_PRIVILEGED_INSTRUCTION
0xc00000fd -1073741571 STATUS_STACK_OVERFLOW
0xc000013a -1073741510 STATUS_CONTROL_C_EXIT
0xC0000142 -1073741502 STATUS_DLL_INIT_FAILED
0xC0000194 -1073741420 Status_Not_Found object not found
0xC0000354 -1073740972 Status_Debugger_Inactive An attempt to do an operation on a debug port failed because the port is in the process of being deleted.
0xC8000147 -939523769 NULL
0xC8000152 -939523758 MCIERR_Seq_Port_Nonexistent
0xC8000158 -939523752 NULL
0xC80001FE -939523586 hrLogWriteFail unable to write to the log file
0xC8000211 -939523567 hrLogDiskFull
0xC8000240 -939523520 SE_Auditid_Assign_Special_Priv
0xC80003F3 -939523085 hrOutOfMemory The computer is out of memory
0xC80003F6 -939523082 hrOutOfBuffers out of database page buffers
0xC80003FA -939523078 hrReadVerifyFailure
0xC80003FB -939523077 Error_No_Log_Space System could not allocate the required space in a registry log
0xC80003FE -939523074 hrDiskIO
0xC8000402 -939523070 ERROR_OBJECT_ALREADY_EXISTS Object already exists
0xC8000402 -939523070 RECORD TOO BIG This seems to be a recoverable error, and possibly due to many Scan Service Packages left around when the 2003 ITMU was used. This is NOT the case.
0xC800042D -939523027 RefreshServerUpdateInfo WSUS unable to update software distribution folder. Scans fail.
0xC8000442 -939523006 CS_Event_reg_Operations_Failed
0xC800044E -939522994 hrWriteConflict The write lock failed due to an outstanding write lock
0xC8000710 -939522288 hrDiskFull
0xD0000005 -805306363 ERROR_ACCESS_DENIED
0xD0000006 -805306362 Error_Invalid_Handle
0xD0000008 -805306360 ERROR_NOT_ENOUGH_MEMORY not enough storage is available to process this command
0xD0000017 -805306345 Error_CRC
0xD0000018 -805306344 Error_Bad_Length the program issued a command but the command length is incorrect
0xD000001D -805306339 Error_Write_Fault the system cannot write the specified device
0xD0000022 -805306334 Error_Wrong_Disk
0xD000012D -805306067 HTTP_Status_Moved Object Permanently moved
0xD0000135 -805306059 MCIErr_Set_Drive
0xD000013A -805306054 NULL
0xD0000142 -805306046 MCIERR_Wave_Inputsinuse
0xD0000194 -805305964 HTTP_Status_Not_Found
0xD0000354 -805305516 NULL
0xe0000101 -536870655 ERROR_SECTION_NOT_FOUND
0xe0000201 -536870399 ERROR_CLASS_MISMATCH
0xe0000203 -536870397 ERROR_NO_DRIVER_SELECTED
0xe000020b -536870389 ERROR_NO_SUCH_DEVINST
0xe000020d -536870387 ERROR_INVALID_CLASS_INSTALLER
0xe0000217 -536870377 ERROR_BAD_SERVICE_INSTALLSECT
0xe0000219 -536870375 ERROR_NO_ASSOCIATED_SERVICE
0xe000022b -536870357 ERROR_DI_DONT_INSTALL
0xe000022d -536870355 ERROR_NON_WINDOWS_NT_DRIVER
0xe000022f -536870353 ERROR_NO_CATALOG_FOR_OEM_INF
0xe0000230 -536870352 ERROR_DEVINSTALL_QUEUE_NONNATIVE
0xe0000234 -536870348 ERROR_DRIVER_NONNATIVE
0xe000023a -536870342 ERROR_PNP REGISTRY_ERROR
0x800f0800 CBS_E_INTERNAL_ERROR Reserved error (|); there is no message for this error
0x800f0801 CBS_S_BUSY operation is still in progress
0x800f0801 CBS_E_NOT_INITIALIZED session not initialized
0x800f0802 CBS_S_ALREADY_EXISTS source already exists, now copy not added
0x800f0802 CBS_E_ALREADY_INITIALIZED session already initialized
0x800f0803 CBS_S_STACK_SHUTDOWN_REQUIRED servicing stack updated, aborting
0x800f0803 CBS_E_INVALID_PARAMETER invalid method argument
0x800f0804 CBS_E_OPEN_FAILED the update could not be found or could not be opened
0x800f0805 CBS_E_INVALID_PACKAGE the update package was not a valid CSI update
0x800f0806 CBS_E_PENDING the operation could not be complete due to locked resources
0x800f0807 CBS_E_NOT_INSTALLABLE the component referenced is not separately installable
0x800f0808 CBS_E_IMAGE_NOT_ACCESSIBLE the image location specified could not be accessed
0x800f0809 CBS_E_ARRAY_ELEMENT_MISSING attempt to get non-existent array element
0x800f080A CBS_E_REESTABLISH_SESSION session object updated, must recreate session
0x800f080B CBS_E_PROPERTY_NOT_AVAILABLE requested property is not supported
0x800f080C CBS_E_UNKNOWN_UPDATE named update not present in package
0x800f080D CBS_E_MANIFEST_INVALID_ITEM invalid attribute or element name encountered
0x800f080E CBS_E_MANIFEST_VALIDATION_DUPLICATE_ATTRIBUTES multiple attributes have the same name
0x800f080F CBS_E_MANIFEST_VALIDATION_DUPLICATE_ELEMENT multiple elements have the same name
0x800f0810 CBS_E_MANIFEST_VALIDATION_MISSING_REQUIRED_ATTRIBUTES required attributes are missing
0x800f0811 CBS_E_MANIFEST_VALIDATION_MISSING_REQUIRED_ELEMENTS required attributes are missing
0x800f0812 CBS_E_MANIFEST_VALIDATION_UPDATES_PARENT_MISSING required attributes are missing
0x800f0813 CBS_E_INVALID_INSTALL_STATE install state value not acceptable
0x800f0814 CBS_E_INVALID_CONFIG_VALUE invalid setting configuration value
0x800f0815 CBS_E_INVALID_CARDINALITY invalid cardinality
0x800f0816 CBS_E_DPX_JOB_STATE_SAVED job state for DPX has been saved
0x800f0817 CBS_E_PACKAGE_DELETED package was uninstalled and is no longer accessible
0x800f0818 CBS_E_IDENTITY_MISMATCH container package points to a package manifest whose identity doesn’t match the identity specified
0x800f0819 CBS_E_DUPLICATE_UPDATENAME update name is duplicated in package.
0x800f081A CBS_E_INVALID_DRIVER_OPERATION_KEY the driver operations key is corrupt or invalid
0x800f081B CBS_E_UNEXPECTED_PROCESSOR_ARCHITECTURE the processor architecture specified is not supported
0x800f081C CBS_E_EXCESSIVE_EVALUATION Watchlist: not able to reach steady state after too many attempts.
0x800f081D CBS_E_CYCLE_EVALUATION Watchlist: cycle appears when planning component intended state.
0x800f081E CBS_E_NOT_APPLICABLE the package is not applicable
0x800f081F CBS_E_SOURCE_MISSING source for package or file not found, ResolveSource() unsuccessful
0x800f0820 CBS_E_CANCEL user cancel, IDCANCEL returned by ICbsUIHandler method except Error()
0x800f0821 CBS_E_ABORT client abort, IDABORT returned by ICbsUIHandler method except Error()
0x800f0822 CBS_E_ILLEGAL_COMPONENT_UPDATE Component update without specifying <updateComponent> in package manifest.
0x800f0823 CBS_E_NEW_SERVICING_STACK_REQUIRED Package needs a newer version of the servicing stack.
0x800f0824 CBS_E_SOURCE_NOT_IN_LIST Package source not in list.
0x800f0825 CBS_E_CANNOT_UNINSTALL Package cannot be uninstalled.
0x800f0826 CBS_E_PENDING_VICTIM Package failed to install because another pended package failed.
0x800f0827 CBS_E_STACK_SHUTDOWN_REQUIRED servicing stack updated, aborting
0x800f0900 CBS_E_XML_PARSER_FAILURE unexpected internal XML parser error.
0x800f0901 CBS_E_MANIFEST_VALIDATION_MULTIPLE_UPDATE_COMPONENT_ON_SAME_FAMILY_NOT_ALLOWED In a given package, only one <updateComponent> Is allowed for a component family.
0xFFFFF8F0 -1808 JET_errDiskFull
0xFFFFFb40 -1216 JET_errAttachedDatabaseMismatch
0xFFFFFb4a -1206 JET_errDatabaseCorrupted
0xFFFFFBBE -1090 JET_errInstanceUnavailable
0xFFFFFBF8 -1032 JET_errFileAccessDenied
0xFFFFFC01 -1023 NULL
0xFFFFFC02 -1022 JET_errDiskIO
0xFFFFFC06 -1018 JET_errReadVerifyFailure
0xFFFFFC0D -1011 JET_errOutOfMemory
0xFFFFFdc9 -567 JET_errDbTimeTooNew
0xFFFFFdda -550 JET_errDatabaseInconsistent
0xFFFFFDEC -532 NULL
0xFFFFFDfd -515 JET_errInvalidLogSequence
0xfffffe02 -510 JET_errLogWriteFail
0xfffffe0b -501 JET_errLogFileCorrupt
0xffffff99 -103 JET_errOutOfThreads
0xFFFFFFFF -1 Cancel
12005 wininet — ERROR_INTERNET_INVALID_URL — The URL is invalid. The URL is invalid.
12005 winhttp — ERROR_WINHTTP_INVALID_URL — The URL is not valid. The URL is not valid.
Коды системных ошибок (windows error codes)
В следующем списке приведены коды системных ошибок на русском (ошибки от 0 до 499).
- Ошибка при _ успешном выполнении
-
- 0 (0x0)
- Операция выполнена успешно.
- Ошибка _ Недопустимая _ функция
-
- 1 (0x1)
- Неверная функция.
- _файл ошибок _ не _ найден
-
- 2 (0x2)
- Системе не удается найти указанный файл.
- _путь к ошибке _ не _ найден
-
- 3 (0x3)
- Системе не удается найти указанный путь.
- Ошибка _ слишком _ много _ открытых _ файлов
-
- 4 (0x4)
- Системе не удается открыть файл.
- Ошибка _ отказа в доступе _
-
- 5 (0x5)
- Отказано в доступе».
- Ошибка _ недопустимого _ маркера
-
- 6 (0x6)
- Дескриптор недействителен.
- некоторая ошибка в _ _ корзине
-
- 7 (0x7)
- Блоки управления хранилищем были уничтожены.
- Ошибка _ не _ хватает _ памяти
-
- 8 (0x8)
- Недостаточно ресурсов памяти для обработки этой команды.
- Ошибка _ недопустимого _ блока
-
- 9 (0x9)
- Недопустимый адрес управляющего блока хранения.
- Ошибка _ неправильной _ среды
-
- 10 (0xA)
- Неверное окружение.
- _неправильный _ Формат ошибки
-
- 11 (0xB)
- Была сделана попытка загрузить программу, имеющую неверный формат.
- Ошибка _ доступа к недопустимым _ данным
-
- 12 (0xC)
- Недопустимый код доступа.
- Ошибка при _ недопустимых _ данных
-
- 13 (0xD)
- Недопустимые данные.
- Ошибка _ OUTOFMEMORY
-
- 14 (0xE)
- Недостаточно свободного места для выполнения этой операции.
- Ошибка _ недопустимого _ диска
-
- 15 (0xF)
- Системе не удается найти указанный диск.
- Ошибка в _ текущем _ каталоге
-
- 16 (0x10)
- Невозможно удалить каталог.
- Ошибка _ не на _ том же _ устройстве
-
- 17 (0x11)
- Системе не удается переместить файл на другой диск.
- Ошибка _ больше _ нет _ файлов
-
- 18 (0x12)
- Больше нет файлов.
- Ошибка _ записи для _ защиты
-
- 19 (0x13)
- Носитель защищен от записи.
- Ошибка _ неправильной _ единицы
-
- 20 (0x14)
- Системе не удается найти указанное устройство.
- Ошибка _ не _ готова
-
- 21 (0x15)
- Устройство не готово.
- Ошибка _ неправильной _ команды
-
- 22 (0x16)
- Устройство не распознает команду.
- CRC, ошибка _
-
- 23 (0x17)
- Ошибка данных (циклическая проверка избыточности).
- Ошибка _ неправильной _ длины
-
- 24 (0x18)
- Программа выдала команду, но длина команды неверна.
- _Поиск ошибок
-
- 25 (0x19)
- Диску не удается найти определенную область или отслеживание на диске.
- Ошибка _ при _ отсутствии _ диска DOS
-
- 26 (0x1A)
- Не удается получить доступ к указанному диску или дискете.
- _сектор ошибок _ не _ найден
-
- 27 (0x1B)
- Диску не удалось найти запрошенный сектор.
- Ошибка _ вне _ _ бумаги
-
- 28 (0x1C)
- В принтере нет бумаги.
- Ошибка _ записи _ ошибки
-
- 29 (0x1D)
- Системе не удается выполнить запись на указанное устройство.
- Ошибка при _ чтении _
-
- 30 (0x1E)
- Системе не удается выполнить чтение с указанного устройства.
- Ошибка _ _ при Gen
-
- 31 (0x1F)
- Устройство, подключенное к системе, не работает.
- _нарушение общего доступа к ошибке _
-
- 32 (0x20)
- The process cannot access the file because it is being used by another process.
- _нарушение блокировки _ ошибки
-
- 33 (0x21)
- Процессу не удается получить доступ к файлу, так как другой процесс заблокировал часть этого файла.
- Ошибка _ неправильного _ диска
-
- 34 (0x22)
- В дисководе находится неверная дискета. Вставьте %2 (серийный номер тома: %3) в диск %1.
- превышено общее количество ошибок в _ общем _ буфере _
-
- 36 (0x24)
- Слишком много файлов открыто для совместного использования.
- Ошибка при _ обработке _ EOF
-
- 38 (0x26)
- Достигнут конец файла.
- Ошибка при _ обработке _ диска _ переполнена
-
- 39 (0x27)
- Диск полон.
- Ошибка _ не _ поддерживается
-
- 50 (0x32)
- Запрос не поддерживается.
- Ошибка _ REM _ не _ список
-
- 51 (0x33)
- Windows не удается найти сетевой путь. Убедитесь, что сетевой путь указан правильно и конечный компьютер не занят или отключен. Если Windows по-прежнему не удается найти сетевой путь, обратитесь к администратору сети.
- Ошибка _ DUP _ имя
-
- 52 (0x34)
- Вы не подключены, так как в сети существует повторяющееся имя. При присоединении к домену перейдите в раздел система на панели управления, чтобы изменить имя компьютера, и повторите попытку. При присоединении к Рабочей группе Выберите другое имя рабочей группы.
- Ошибка _ неправильного _ нетпас
-
- 53 (0x35)
- Сетевой путь не найден».
- Ошибка » _ сеть _ занята»
-
- 54 (0x36)
- Сеть занята.
- Ошибка _ dev _ не _ существует
-
- 55 (0x37)
- Указанный сетевой ресурс или устройство больше не доступны.
- Ошибка _ слишком _ много _ команд
-
- 56 (0x38)
- Достигнуто ограничение на количество команд в сети BIOS.
- Ошибка _ ADAP _ ХДВ _ Err
-
- 57 (0x39)
- Произошла аппаратная ошибка сетевого адаптера.
- Ошибка _ неправильного _ net _ отв
-
- 58 (0x3A)
- Указанный сервер не может выполнить запрошенную операцию.
- Ошибка _ унексп _ net _ Err
-
- 59 (0x3B)
- Произошла непредвиденная ошибка сети.
- ошибка с _ плохой ошибкой _ REM _ ADAP
-
- 60 (0x3C)
- Удаленный адаптер несовместим.
- Ошибка _ принтк _ Full
-
- 61 (0x3D)
- Очередь принтера заполнена.
- Ошибка _ без _ _ области очереди
-
- 62 (0x3E)
- Место для хранения файла, ожидающего печати, недоступно на сервере.
- _Печать ошибки _ отменена
-
- 63 (0x3F)
- Ваш файл, ожидающий печати, был удален.
- Ошибка _ NETNAME _ удалена
-
- 64 (0x40)
- Указанное сетевое имя более недоступно.
- Ошибка _ _ отказа в доступе к сети _
-
- 65 (0x41 влево)
- Отказано в доступе к сети.
- Ошибка _ неправильного _ _ типа dev
-
- 66 (0x42)
- Неверный тип сетевого ресурса.
- Ошибка _ неправильного _ сетевого _ имени
-
- 67 (0x43)
- Не найдено сетевое имя».
- Ошибка _ слишком _ много _ имен
-
- 68 (0x44)
- Превышено ограничение на число имен для сетевого адаптера локального компьютера.
- Ошибка _ слишком _ много _ подряд
-
- 69 (0x45)
- Превышено ограничение на количество сеансов сетевой BIOS.
- _общий доступ к ошибкам _ приостановлен
-
- 70 (0x46)
- Удаленный сервер приостановлен или находится в процессе запуска.
- Ошибка _ req _ не _ акцеп
-
- 71 (0x47)
- В настоящее время больше нет доступных подключений к этому удаленному компьютеру, так как количество подключений, которое может принять компьютер, уже установлено.
- Ошибка _ редир _ приостановлена
-
- 72 (0x48)
- Указанный принтер или дисковое устройство приостановлены.
- _файл ошибок _ существует
-
- 80 (0x50)
- Файл существует
- Ошибка _ не может _ быть
-
- 82 (0x52)
- Не удается создать каталог или файл.
- Ошибка при _ сбое _ I24
-
- 83 (0x53)
- Сбой на INT 24.
- Ошибка _ из _ _ структур
-
- 84 (0x54)
- Хранилище для обработки этого запроса недоступно.
- Ошибка _ уже _ назначена
-
- 85 (0x55)
- Имя локального устройства уже используется.
- Ошибка _ неправильного _ пароля
-
- 86 (0x56)
- Указан неверный сетевой пароль.
- Ошибка _ недопустимого _ параметра
-
- 87 (0x57)
- Неправильный параметр».
- Ошибка _ ошибки _ записи в сеть _
-
- 88 (0x58)
- В сети произошла ошибка записи.
- Ошибка _ без _ _ слотов процедур
-
- 89 (0x59)
- В данный момент система не может запустить другой процесс.
- Ошибка _ слишком _ большого числа _ семафоров
-
- 100 (0x64)
- Невозможно создать другой системный семафор.
- Ошибка _ без _ _ уже существующего _ владельца SEM
-
- 101 (0x65)
- Эксклюзивный семафор принадлежит другому процессу.
- указана ошибка _ SEM _ _
-
- 102 (0x66)
- Семафор установлен и не может быть закрыт.
- Ошибка _ слишком _ много _ _ запросов SEM
-
- 103 (0x67)
- Семафор не может быть установлен повторно.
- Ошибка _ недопустима _ во _ _ время прерывания
-
- 104 (0x68)
- Не удается запросить эксклюзивные семафоры во время прерывания.
- Ошибка _ SEM _ owner _ умер
-
- 105 (0x69)
- Предыдущее владение этим семафором завершено.
- Ошибка _ в _ _ ограничении пользователя SEM
-
- 106 (0x6A)
- Вставьте дискету для диска %1.
- Ошибка _ при _ изменении диска
-
- 107 (0x6B)
- Программа остановлена, так как не вставлена дополнительная дискета.
- Ошибка _ _ блокировки диска
-
- 108 (0x6C)
- Диск занят или заблокирован другим процессом.
- Ошибка при _ нарушении _ канала
-
- 109 (0x6D)
- Канал завершен.
- Ошибка _ _ при открытии
-
- 110 (0x6E)
- Системе не удается открыть указанное устройство или файл.
- _ _ переполнение буфера ошибки
-
- 111 (0x6F)
- Имя файла слишком длинное.
- Ошибка _ _ переполнения диска
-
- 112 (0x70)
- Недостаточно места на диске.
- Ошибка _ больше _ нет _ _ дескрипторов поиска
-
- 113 (0x71)
- Больше нет доступных идентификаторов внутренних файлов.
- Ошибка _ недопустимого _ целевого _ маркера
-
- 114 (0x72)
- Неверный целевой внутренний идентификатор файла.
- Ошибка _ недопустимой _ категории
-
- 117 (0x75)
- Вызов IOCTL, сделанный программой приложения, неверен.
- Ошибка _ при _ проверке недопустимого _ параметра
-
- 118 (0x76)
- Неправильное значение параметра проверки-on-Write.
- ОШИБКА с _ неправильным _ _ уровнем драйвера
-
- 119 (0x77)
- Система не поддерживает запрошенную команду.
- _вызов ошибки _ не _ реализован
-
- 120 (0x78)
- Эта функция не поддерживается в этой системе.
- Ошибка _ _ времени ожидания SEM
-
- 121 (0x79)
- Истек период ожидания семафора.
- Ошибка _ недостаточного _ буфера
-
- 122 (0x7A)
- Область данных, переданная в системный вызов, слишком мала.
- Ошибка _ недопустимое _ имя
-
- 123 (0x7B)
- Синтаксическая ошибка в имени файла, имени каталога или метке тома.
- _Недопустимый _ уровень ошибки
-
- 124 (0x7C)
- Неверный уровень системного вызова.
- Ошибка _ без _ _ метки тома
-
- 125 (0x7D)
- Диск не имеет метки тома.
- Ошибка _ Mod _ не _ найдена
-
- 126 (0x7E)
- Не найден указанный модуль.
- Ошибка _ _ не _ найдена процедура
-
- 127 (0x7F)
- Не удалось найти указанную процедуру.
- Ошибка _ Ожидание _ отсутствия _ дочерних элементов
-
- 128 (0x80)
- Нет дочерних процессов для ожидания.
- Ошибка _ дочернего элемента _ не _ завершена
-
- 129 (0x81)
- Приложение %1 не может быть запущено в режиме Win32.
- Ошибка _ прямого _ доступа к _ обработчику
-
- 130 (0x82)
- Попытка использовать маркер файла для открытого раздела диска для операции, отличной от операций ввода-вывода с необработанным диском.
- Ошибка при _ поиске отрицательных результатов _
-
- 131 (0x83)
- Предпринята попытка переместить указатель на файл перед началом файла.
- _Поиск ошибок _ на _ устройстве
-
- 132 (0x84)
- Не удается задать указатель файла для указанного устройства или файла.
- Ошибка _ : _ Присоединение к _ целевому объекту
-
- 133 (0x85)
- Команду JOIN или SUBST нельзя использовать для диска, который содержит ранее подключенные диски.
- Ошибка _ _ присоединена
-
- 134 (0x86)
- Предпринята попытка использовать команду JOIN или SUBST на диске, который уже присоединен.
- _указана _ Ошибка
-
- 135 (0x87)
- Была предпринята попытка использовать команду JOIN или SUBST на диске, который уже был заменен.
- Ошибка _ не _ присоединена
-
- 136 (0x88)
- Система попыталась удалить соединение диска, который не присоединен.
- не удается отобразить ошибку _ _
-
- 137 (0x89)
- Система попыталась удалить подстановку незаменяемого диска.
- Ошибка при _ присоединении _ к _ соединению
-
- 138 (0x8A)
- Система попыталась присоединить диск к каталогу на присоединенном диске.
- Ошибка _ subst _ для _ subst
-
- 139 (0x8B)
- Система попыталась заменить диск на каталог на подставляемом диске.
- Ошибка при _ присоединении _ к _ subst
-
- 140 (0x8C)
- Система попыталась присоединить диск к каталогу на подставляемом диске.
- Ошибка _ subst _ для _ Присоединение
-
- 141 (0x8D)
- Система попыталась отобразить диск в каталог на присоединенном диске.
- _диск занят _
-
- 142 (0x8E)
- В настоящее время системе не удается выполнить соединение или SUBST.
- Ошибка на _ том же _ диске
-
- 143 (0x8F)
- Система не может присоединить или заменить диск на каталог или для каталога на том же диске.
- Ошибка _ dir _ не _ корневая папка
-
- 144 (0x90)
- Каталог не является вложенным каталогом корневого каталога.
- Ошибка _ dir, _ не _ пустая
-
- 145 (0x91)
- Каталог не пуст.
- Ошибка _ — _ _ путь SUBST
-
- 146 (0x92)
- Указанный путь используется в подстановке.
- Ошибка _ — _ путь к соединению _
-
- 147 (0x93)
- Недостаточно ресурсов для обработки этой команды.
- _путь к ошибке _ занят
-
- 148 (0x94)
- Указанный путь не может быть использован в настоящее время.
- Ошибка _ : _ subst _ Target
-
- 149 (0x95)
- Предпринята попытка присоединить или заменить диск, для которого каталог на диске является целью предыдущего замены.
- Ошибка _ _ трассировки системы
-
- 150 (0x96)
- Данные трассировки системы не указаны в файле CONFIG.SYS, или трассировка запрещена.
- Ошибка при _ неправильном _ _ числе событий
-
- 151 (0x97)
- Указано неправильное число указанных событий семафора для Досмукссемваит.
- Ошибка _ слишком _ много _ муксваитерс
-
- 152 (0x98)
- Досмукссемваит не выполнен; уже задано слишком много семафоров.
- Ошибка _ недопустимого _ _ формата списка
-
- 153 (0x99)
- Недопустимый список Досмукссемваит.
- _ _ слишком _ ДЛИННая метка ошибки
-
- 154 (0x9A)
- Введенная метка тома превышает ограничение на количество символов в целевой файловой системе.
- Ошибка _ слишком _ много _ ткбс
-
- 155 (0x9B)
- Не удается создать другой поток.
- _сигнал ошибки _ отклонен
-
- 156 (0x9C)
- Процесс получателя отклонил сигнал.
- Ошибка _ отклонена
-
- 157 (0x9D)
- Сегмент уже удален и не может быть заблокирован.
- Ошибка _ не _ заблокирована
-
- 158 (0x9E)
- Сегмент уже разблокирован.
- ОШИБКА с _ неверным _ _ адресом THREADID
-
- 159 (0x9F)
- Неправильный адрес для идентификатора потока.
- ошибочные _ _ аргументы
-
- 160 (0X82)
- Один или несколько аргументов неверны.
- ОШИБКА с _ неверным _ путем
-
- 161 (0xA1)
- Указан недопустимый путь.
- _сигнал ошибки _ в ожидании
-
- 162 (0xA2)
- Сигнал уже находится в состоянии ожидания.
- Ошибка _ Max _ СРДС _ достигнуто
-
- 164 (токенов 0xA4)
- В системе больше нельзя создавать потоки.
- _сбой блокировки _ ошибки
-
- 167 (0xA7)
- Не удалось заблокировать область файла.
- Ошибка _ занята
-
- 170 (0xAA)
- Запрошенный ресурс уже используется.
- Ошибка _ _ _ в процессе поддержки _ устройства
-
- 171 (0xAB)
- Идет обнаружение поддержки команд устройства.
- Ошибка _ отмены _ нарушения
-
- 173 (0xAD)
- Запрос блокировки не был выполнен для указанной региона отмены.
- ОШИБКИ _ атомарных _ блокировок _ не _ поддерживаются
-
- 174 (0xAE)
- Файловая система не поддерживает атомарные изменения типа блокировки.
- Ошибка _ недопустимого _ _ номера сегмента
-
- 180 (0xB4)
- Система обнаружила неверный номер сегмента.
- ОШИБКА с _ недопустимым _ порядковым номером
-
- 182 (0xB6)
- Операционная система не может выполнить %1.
- Ошибка _ уже _ существует
-
- 183 (0xB7)
- невозможно создать файл, так как он уже существует.
- Ошибка _ недопустимого _ номера флага _
-
- 186 (0xBA)
- Передан неверный флаг.
- Ошибка _ SEM _ не _ найдена
-
- 187 (0xBB)
- Указанное имя системного семафора не найдено.
- Ошибка _ при _ запуске _ кодесег
-
- 188 (0xBC)
- Операционная система не может выполнить %1.
- Ошибка _ недопустимого _ стакксег
-
- 189 (0xBD)
- Операционная система не может выполнить %1.
- Ошибка _ недопустимого _ MODULETYPE
-
- 190 (0xBE)
- Операционная система не может выполнить %1.
- Ошибка _ недопустимой _ _ подписи exe
-
- 191 (0xBF)
- Не удается выполнить %1 в режиме Win32.
- Ошибка _ exe _ помечена как _ Недопустимая
-
- 192 (0xC0)
- Операционная система не может выполнить %1.
- Ошибка в _ неправильном _ _ формате exe
-
- 193 (0xC1)
- %1 не является допустимым приложением Win32.
- Данные об ошибках при _ итерации _ _ превышают _ 64 КБ
-
- 194 (0xC2)
- Операционная система не может выполнить %1.
- Ошибка _ недопустимого _ миналлоксизе
-
- 195 (0xC3)
- Операционная система не может выполнить %1.
- Ошибка _ динлинк _ из _ недопустимого _ кольца
-
- 196 (0xC4)
- Операционная система не может запустить эту программу приложения.
- Ошибка _ иопл _ не _ включена
-
- 197 (0xC5)
- Операционная система в настоящее время не настроена для запуска этого приложения.
- Ошибка _ недопустимого _ сегдпл
-
- 198 (0xC6)
- Операционная система не может выполнить %1.
- Ошибка _ аутодатасег _ превышает _ 64 КБ
-
- 199 (0xC7)
- Операционная система не может запустить эту программу приложения.
- Ошибка _ RING2SEG _ должна _ быть _ перемещаемой
-
- 200 (0xC8)
- Сегмент кода не может быть больше или равен 64 КБ.
- ERROR _ reloc _ chain _ ксидс _ сеглим
-
- 201 (0xC9)
- Операционная система не может выполнить %1.
- Ошибка _ инфлуп _ в _ _ цепочке reloc
-
- 202 (0xCA)
- Операционная система не может выполнить %1.
- Ошибка _ ENVVAR _ не _ найдена
-
- 203 (0xCB)
- Системе не удалось найти указанный параметр среды.
- Ошибка _ не _ _ отправлен сигнал
-
- 205 (0xCD)
- Ни один из процессов в поддереве команды не имеет обработчика сигналов.
- Ошибка _ имя файла _ ексцед _ Range
-
- 206 (0xCE)
- Слишком длинное имя файла или расширение.
- Ошибка _ _ _ при использовании стека RING2 _
-
- 207 (0xCF)
- Стек Ring 2 используется.
- _ _ _ слишком _ длинное расширение мета для ошибки
-
- 208 (0xD0)
- Символы глобального имени файла * или? введены неправильно или указано слишком много символов глобального имени файла.
- Ошибка _ недопустимого _ _ номера сигнала
-
- 209 (0xD1)
- Отправляемый сигнал неверен.
- _Поток ошибок _ 1 _ неактивен
-
- 210 (0xD2)
- Не удается установить обработчик сигналов.
- Ошибка _ заблокирована
-
- 212 (0xD4)
- Сегмент заблокирован и не может быть выделен повторно.
- Ошибка _ слишком _ много _ модулей
-
- 214 (0xD6)
- К этой программе или модулю динамической компоновки подключено слишком много модулей динамической компоновки.
- _вложенность ошибок _ _ запрещена
-
- 215 (0xD7)
- Невозможно вложить вызовы в LoadModule.
- Ошибка _ exe _ _ _ несоответствие типов компьютеров
-
- 216 (0xD8)
- Эта версия %1 несовместима с версией Windows, которую вы используете. Проверьте сведения о системе компьютера, а затем обратитесь к издателю программного обеспечения.
- Ошибка _ exe _ не _ может _ изменить _ двоичный файл со знаком
-
- 217 (0xD9)
- Файл образа %1 подписан, его невозможно изменить.
- Ошибка _ exe _ не _ может _ изменить _ _ двоичный файл со строгим знаком
-
- 218 (0xDA)
- Файл образа %1 имеет строгие подписи, его невозможно изменить.
- файл с ОШИБКАми _ _ извлечен _
-
- 220 (0xDC)
- Этот файл извлечен или заблокирован для редактирования другим пользователем.
- _требуется извлечение _ ошибок
-
- 221 (0xDD)
- Перед сохранением изменений необходимо извлечь файл.
- Ошибка _ неправильного _ _ типа файла
-
- 222 (0xDE)
- Сохраняемый или извлекаемый тип файла заблокирован.
- _файл ошибок _ слишком _ большой
-
- 223 (0xDF)
- Размер файла превышает допустимый предел и не может быть сохранен.
- _ _ требуется проверка подлинности форм с ошибками _
-
- 224 (0xE0)
- Доступ запрещен. Перед открытием файлов в этом расположении необходимо сначала добавить веб-сайт в список надежных сайтов, перейти на веб-сайт и выбрать параметр автоматического входа.
- ОШИБОЧный _ вирус _ заражен
-
- 225 (0xE1)
- Операция не была успешно завершена, так как файл содержит вирус или потенциально нежелательное программное обеспечение.
- Ошибка _ при _ удалении вируса
-
- 226 (0xE2)
- Этот файл содержит вирус или потенциально нежелательное программное обеспечение и не может быть открыт. Из-за природы этого вируса или потенциально нежелательного программного обеспечения файл был удален из этого расположения.
- _локальный канал _ ошибки
-
- 229 (0xE5)
- Канал является локальным.
- Ошибка _ неверного _ канала
-
- 230 (0xE6)
- Недопустимое состояние канала.
- _канал ошибки _ занят
-
- 231 (0xE7)
- Все экземпляры канала заняты.
- Ошибка _ без _ данных
-
- 232 (0xE8)
- Канал закрывается.
- _канал ошибки _ не _ подключен
-
- 233 (0xE9)
- Процесс отсутствует на другом конце канала.
- Ошибка _ дополнительных _ данных
-
- 234 (0xEA)
- More data is available.
- Ошибка _ VC _ DISCONNECTED
-
- 240 (0xF0)
- Сеанс был отменен.
- Ошибка _ недопустимого _ _ имени EA
-
- 254 (0xFE)
- Указано недопустимое имя расширенного атрибута.
- _несоответствие _ списка EA с ошибками _
-
- 255 (0xFF)
- Расширенные атрибуты непоследовательны.
- _время ожидания ожидания
-
- 258 (0x102)
- Время операции ожидания истекло.
- Ошибка _ больше _ нет _ элементов
-
- 259 (0x103)
- Больше нет доступных данных.
- Ошибка _ при _ копировании
-
- 266 (0x10A)
- Функции копирования использовать нельзя.
- _Каталог ошибок
-
- 267 (0x10B)
- Недопустимое имя каталога.
- Ошибка _ EAS _ окончательный _
-
- 275 (0x113)
- Расширенные атрибуты не помещаются в буфер.
- Ошибка _ EA _ File _ поврежден
-
- 276 (0x114)
- Файл расширенного атрибута в подключенной файловой системе поврежден.
- Ошибка _ _ таблицы EA _ Full
-
- 277 (0x115)
- Файл расширенной таблицы атрибутов заполнен.
- Ошибка _ недопустимого _ _ маркера EA
-
- 278 (0x116)
- Указан недопустимый расширенный маркер атрибута.
- Ошибка _ EAS _ не _ поддерживается
-
- 282 (0x11A)
- Подключенная файловая система не поддерживает расширенные атрибуты.
- ОШИБКА, _ не _ владелец
-
- 288 (0x120)
- Попытка освободить мьютекс, не принадлежащий вызывающему объекту.
- Ошибка _ слишком _ много _ записей
-
- 298 (0x12A)
- В семафоре создано слишком много записей.
- Ошибка _ частичной _ копии
-
- 299 (0x12B)
- Завершена только часть запроса Реадпроцессмемори или Вритепроцессмемори.
- Ошибка » _ нежесткая блокировка _ не _ предоставлена»
-
- 300 (0x12C)
- Запрос на нежесткую блокировку отклоняется.
- Ошибка _ недопустимого _ протокола нежесткой блокировки _
-
- 301 (0x12D)
- Система получила недопустимое подтверждение на нежесткую блокировку.
- Ошибка _ _ слишком _ фрагментации диска
-
- 302 (0x12E)
- Том слишком фрагментирован для выполнения этой операции.
- Ошибка _ удаления _ в ожидании
-
- 303 (0x12F)
- Не удается открыть файл, так как он находится в процессе удаления.
- Ошибка _ несовместима _ с _ глобальным _ _ _ параметром реестра Short Name _
-
- 304 (0x130)
- Параметры короткого имени не могут быть изменены на этом томе из-за параметра глобального реестра.
- _ _ _ _ _ в томе не включены короткие имена _ ошибок
-
- 305 (0x131)
- Короткие имена не включены на этом томе.
- _несоответствие _ потока _ безопасности при ошибке _
-
- 306 (0x132)
- Поток безопасности для данного тома находится в нестабильном состоянии. Запустите CHKDSK на томе.
- Ошибка _ недопустимого _ _ диапазона блокировки
-
- 307 (0x133)
- Запрошенная операция блокировки файла не может быть обработана из-за недопустимого диапазона байтов.
- _подсистема изображения ошибки _ _ отсутствует _
-
- 308 (0x134)
- Отсутствует подсистема, необходимая для поддержки типа образа.
- GUID уведомления об ОШИБКе _ _ _ уже _ определен
-
- 309 (0x135)
- С указанным файлом уже связан GUID уведомления.
- Ошибка _ недопустимого _ _ обработчика исключений
-
- 310 (0x136)
- Обнаружена недопустимая подсистема обработчика исключений.
- Ошибка при _ дублировании _ привилегий
-
- 311 (0x137)
- Для токена указаны дублирующиеся привилегии.
- Ошибка _ не _ _ обработано диапазонов
-
- 312 (0x138)
- Не удалось обработать диапазоны для указанной операции.
- Ошибка _ не _ разрешена _ в _ системном _ файле
-
- 313 (0x139)
- Операция не разрешена для внутреннего файла файловой системы.
- _дисковые ресурсы с ошибками _ _ исчерпаны
-
- 314 (0x13A)
- Физические ресурсы этого диска исчерпаны.
- Ошибка _ недопустимого _ токена
-
- 315 (0x13B)
- Недопустимый токен, представляющий данные.
- Функция устройства с ОШИБКАми _ _ _ не _ поддерживается
-
- 316 (0x13C)
- Устройство не поддерживает функцию команды.
- Ошибка _ MR _ _ не _ найдена
-
- 317 (0x13D)
- Системе не удается найти текст сообщения с номером 0x %1 в файле сообщений для %2.
- _область ошибок _ не _ найдена
-
- 318 (0x13E)
- Указанная область не найдена.
- Ошибка _ НЕопределенной _ области
-
- 319 (0x13F)
- Указанная Централизованная политика доступа не определена на целевом компьютере.
- Ошибка _ недопустимого _ ограничения
-
- 320 (0x140)
- Централизованная политика доступа, полученная из Active Directory, недопустима.
- устройство с ОШИБКАми _ _ недоступно
-
- 321 (0x141)
- Устройство недоступно.
- устройство с ОШИБКАми — _ _ нет _ ресурсов
-
- 322 (0x142)
- На целевом устройстве недостаточно ресурсов для завершения операции.
- Ошибка _ _ контрольной суммы данных об ошибках _
-
- 323 (0x143)
- Произошла ошибка контрольной суммы целостности данных. Данные в файловом потоке повреждены.
- Ошибка при _ ВЗАИМОсмешанных _ _ _ операциях ядра EA
-
- 324 (0x144)
- Была предпринята попытка изменить как ядро, так и нормальный Расширенный атрибут (EA) в одной операции.
- Ошибка _ _ Trim на уровне файлов _ _ не _ поддерживается
-
- 326 (0x146)
- Устройство не поддерживает УСЕЧЕНИЕ на уровне файлов.
- _ _ нарушение выравнивания по СМЕЩЕНию ошибок _
-
- 327 (0x147)
- В команде указано смещение данных, которое не соответствует детализации или выравниванию устройства.
- Ошибка _ недопустимого _ поля _ в _ _ списке параметров
-
- 328 (0x148)
- В списке параметров команды указано недопустимое поле.
- Ошибка _ при выполнении операции _ _
-
- 329 (0x149)
- В настоящее время выполняется операция с устройством.
- Ошибка _ неправильного _ _ пути к устройству
-
- 330 (0x14A)
- Предпринята попытка отправить команду через недопустимый путь к целевому устройству.
- Ошибка _ слишком _ большого числа _ дескрипторов
-
- 331 (0x14B)
- В команде указано число дескрипторов, превышающих максимальное поддерживаемое устройством.
- Ошибка _ очистки _ данных _ отключена
-
- 332 (0x14C)
- Очистка в указанном файле отключена.
- Ошибка _ не является _ избыточным _ хранилищем
-
- 333 (0x14D)
- Устройство хранения данных не обеспечивает избыточность.
- _резидентный _ файл ошибок _ не _ поддерживается
-
- 334 (0x14E)
- Операция не поддерживается для резидентных файлов.
- сжатый файл с ОШИБКАми _ _ _ не _ поддерживается
-
- 335 (0x14F)
- Операция не поддерживается для сжатого файла.
- _Каталог ошибок _ не _ поддерживается
-
- 336 (0x150)
- Операция не поддерживается в каталоге.
- Ошибка _ _ чтения _ из _ копии
-
- 337 (0x151)
- Не удалось прочитать указанную копию запрошенных данных.
- Ошибка _ при _ перезагрузке «Недействие» _
-
- 350 (0x15E)
- Не было предпринято никаких действий, так как требуется перезагрузка системы.
- Ошибка _ при _ завершении работы
-
- 351 (0x15F)
- Сбой операции завершения работы.
- Ошибка _ при _ перезапуске
-
- 352 (0x160)
- Сбой операции перезапуска.
- ОШИБОК _ _ достигнуто максимальное число сеансов _
-
- 353 (0x161)
- Достигнуто максимальное число сеансов.
- _режим потока _ ошибок _ уже является _ фоновым
-
- 400 (0x190)
- Поток уже находится в режиме фоновой обработки.
- _режим потока _ ошибок _ не является _ фоновым
-
- 401 (0x191)
- Поток не находится в режиме фоновой обработки.
- _режим обработки _ ошибок _ уже является _ фоновым
-
- 402 (0x192)
- Процесс уже находится в режиме фоновой обработки.
- _режим обработки _ ошибок _ не является _ фоновым
-
- 403 (0x193)
- Процесс не находится в режиме фоновой обработки.
- Ошибка _ недопустимого _ адреса
-
- 487 (0x1E7)
- Попытка доступа к недопустимому адресу.
В следующем списке приведены коды системных ошибок на английском (ошибки от 0 до 499).
FORMAT_MESSAGE_FROM_SYSTEM flag.
- ERROR_SUCCESS
-
- 0 (0x0)
- The operation completed successfully.
- ERROR_INVALID_FUNCTION
-
- 1 (0x1)
- Incorrect function.
- ERROR_FILE_NOT_FOUND
-
- 2 (0x2)
- The system cannot find the file specified.
- ERROR_PATH_NOT_FOUND
-
- 3 (0x3)
- The system cannot find the path specified.
- ERROR_TOO_MANY_OPEN_FILES
-
- 4 (0x4)
- The system cannot open the file.
- ERROR_ACCESS_DENIED
-
- 5 (0x5)
- Access is denied.
- ERROR_INVALID_HANDLE
-
- 6 (0x6)
- The handle is invalid.
- ERROR_ARENA_TRASHED
-
- 7 (0x7)
- The storage control blocks were destroyed.
- ERROR_NOT_ENOUGH_MEMORY
-
- 8 (0x8)
- Not enough memory resources are available to process this command.
- ERROR_INVALID_BLOCK
-
- 9 (0x9)
- The storage control block address is invalid.
- ERROR_BAD_ENVIRONMENT
-
- 10 (0xA)
- The environment is incorrect.
- ERROR_BAD_FORMAT
-
- 11 (0xB)
- An attempt was made to load a program with an incorrect format.
- ERROR_INVALID_ACCESS
-
- 12 (0xC)
- The access code is invalid.
- ERROR_INVALID_DATA
-
- 13 (0xD)
- The data is invalid.
- ERROR_OUTOFMEMORY
-
- 14 (0xE)
- Not enough storage is available to complete this operation.
- ERROR_INVALID_DRIVE
-
- 15 (0xF)
- The system cannot find the drive specified.
- ERROR_CURRENT_DIRECTORY
-
- 16 (0x10)
- The directory cannot be removed.
- ERROR_NOT_SAME_DEVICE
-
- 17 (0x11)
- The system cannot move the file to a different disk drive.
- ERROR_NO_MORE_FILES
-
- 18 (0x12)
- There are no more files.
- ERROR_WRITE_PROTECT
-
- 19 (0x13)
- The media is write protected.
- ERROR_BAD_UNIT
-
- 20 (0x14)
- The system cannot find the device specified.
- ERROR_NOT_READY
-
- 21 (0x15)
- The device is not ready.
- ERROR_BAD_COMMAND
-
- 22 (0x16)
- The device does not recognize the command.
- ERROR_CRC
-
- 23 (0x17)
- Data error (cyclic redundancy check).
- ERROR_BAD_LENGTH
-
- 24 (0x18)
- The program issued a command but the command length is incorrect.
- ERROR_SEEK
-
- 25 (0x19)
- The drive cannot locate a specific area or track on the disk.
- ERROR_NOT_DOS_DISK
-
- 26 (0x1A)
- The specified disk or diskette cannot be accessed.
- ERROR_SECTOR_NOT_FOUND
-
- 27 (0x1B)
- The drive cannot find the sector requested.
- ERROR_OUT_OF_PAPER
-
- 28 (0x1C)
- The printer is out of paper.
- ERROR_WRITE_FAULT
-
- 29 (0x1D)
- The system cannot write to the specified device.
- ERROR_READ_FAULT
-
- 30 (0x1E)
- The system cannot read from the specified device.
- ERROR_GEN_FAILURE
-
- 31 (0x1F)
- A device attached to the system is not functioning.
- ERROR_SHARING_VIOLATION
-
- 32 (0x20)
- The process cannot access the file because it is being used by another process.
- ERROR_LOCK_VIOLATION
-
- 33 (0x21)
- The process cannot access the file because another process has locked a portion of the file.
- ERROR_WRONG_DISK
-
- 34 (0x22)
- The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
- ERROR_SHARING_BUFFER_EXCEEDED
-
- 36 (0x24)
- Too many files opened for sharing.
- ERROR_HANDLE_EOF
-
- 38 (0x26)
- Reached the end of the file.
- ERROR_HANDLE_DISK_FULL
-
- 39 (0x27)
- The disk is full.
- ERROR_NOT_SUPPORTED
-
- 50 (0x32)
- The request is not supported.
- ERROR_REM_NOT_LIST
-
- 51 (0x33)
- Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
- ERROR_DUP_NAME
-
- 52 (0x34)
- You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
- ERROR_BAD_NETPATH
-
- 53 (0x35)
- The network path was not found.
- ERROR_NETWORK_BUSY
-
- 54 (0x36)
- The network is busy.
- ERROR_DEV_NOT_EXIST
-
- 55 (0x37)
- The specified network resource or device is no longer available.
- ERROR_TOO_MANY_CMDS
-
- 56 (0x38)
- The network BIOS command limit has been reached.
- ERROR_ADAP_HDW_ERR
-
- 57 (0x39)
- A network adapter hardware error occurred.
- ERROR_BAD_NET_RESP
-
- 58 (0x3A)
- The specified server cannot perform the requested operation.
- ERROR_UNEXP_NET_ERR
-
- 59 (0x3B)
- An unexpected network error occurred.
- ERROR_BAD_REM_ADAP
-
- 60 (0x3C)
- The remote adapter is not compatible.
- ERROR_PRINTQ_FULL
-
- 61 (0x3D)
- The printer queue is full.
- ERROR_NO_SPOOL_SPACE
-
- 62 (0x3E)
- Space to store the file waiting to be printed is not available on the server.
- ERROR_PRINT_CANCELLED
-
- 63 (0x3F)
- Your file waiting to be printed was deleted.
- ERROR_NETNAME_DELETED
-
- 64 (0x40)
- The specified network name is no longer available.
- ERROR_NETWORK_ACCESS_DENIED
-
- 65 (0x41)
- Network access is denied.
- ERROR_BAD_DEV_TYPE
-
- 66 (0x42)
- The network resource type is not correct.
- ERROR_BAD_NET_NAME
-
- 67 (0x43)
- The network name cannot be found.
- ERROR_TOO_MANY_NAMES
-
- 68 (0x44)
- The name limit for the local computer network adapter card was exceeded.
- ERROR_TOO_MANY_SESS
-
- 69 (0x45)
- The network BIOS session limit was exceeded.
- ERROR_SHARING_PAUSED
-
- 70 (0x46)
- The remote server has been paused or is in the process of being started.
- ERROR_REQ_NOT_ACCEP
-
- 71 (0x47)
- No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
- ERROR_REDIR_PAUSED
-
- 72 (0x48)
- The specified printer or disk device has been paused.
- ERROR_FILE_EXISTS
-
- 80 (0x50)
- The file exists.
- ERROR_CANNOT_MAKE
-
- 82 (0x52)
- The directory or file cannot be created.
- ERROR_FAIL_I24
-
- 83 (0x53)
- Fail on INT 24.
- ERROR_OUT_OF_STRUCTURES
-
- 84 (0x54)
- Storage to process this request is not available.
- ERROR_ALREADY_ASSIGNED
-
- 85 (0x55)
- The local device name is already in use.
- ERROR_INVALID_PASSWORD
-
- 86 (0x56)
- The specified network password is not correct.
- ERROR_INVALID_PARAMETER
-
- 87 (0x57)
- The parameter is incorrect.
- ERROR_NET_WRITE_FAULT
-
- 88 (0x58)
- A write fault occurred on the network.
- ERROR_NO_PROC_SLOTS
-
- 89 (0x59)
- The system cannot start another process at this time.
- ERROR_TOO_MANY_SEMAPHORES
-
- 100 (0x64)
- Cannot create another system semaphore.
- ERROR_EXCL_SEM_ALREADY_OWNED
-
- 101 (0x65)
- The exclusive semaphore is owned by another process.
- ERROR_SEM_IS_SET
-
- 102 (0x66)
- The semaphore is set and cannot be closed.
- ERROR_TOO_MANY_SEM_REQUESTS
-
- 103 (0x67)
- The semaphore cannot be set again.
- ERROR_INVALID_AT_INTERRUPT_TIME
-
- 104 (0x68)
- Cannot request exclusive semaphores at interrupt time.
- ERROR_SEM_OWNER_DIED
-
- 105 (0x69)
- The previous ownership of this semaphore has ended.
- ERROR_SEM_USER_LIMIT
-
- 106 (0x6A)
- Insert the diskette for drive %1.
- ERROR_DISK_CHANGE
-
- 107 (0x6B)
- The program stopped because an alternate diskette was not inserted.
- ERROR_DRIVE_LOCKED
-
- 108 (0x6C)
- The disk is in use or locked by another process.
- ERROR_BROKEN_PIPE
-
- 109 (0x6D)
- The pipe has been ended.
- ERROR_OPEN_FAILED
-
- 110 (0x6E)
- The system cannot open the device or file specified.
- ERROR_BUFFER_OVERFLOW
-
- 111 (0x6F)
- The file name is too long.
- ERROR_DISK_FULL
-
- 112 (0x70)
- There is not enough space on the disk.
- ERROR_NO_MORE_SEARCH_HANDLES
-
- 113 (0x71)
- No more internal file identifiers available.
- ERROR_INVALID_TARGET_HANDLE
-
- 114 (0x72)
- The target internal file identifier is incorrect.
- ERROR_INVALID_CATEGORY
-
- 117 (0x75)
- The IOCTL call made by the application program is not correct.
- ERROR_INVALID_VERIFY_SWITCH
-
- 118 (0x76)
- The verify-on-write switch parameter value is not correct.
- ERROR_BAD_DRIVER_LEVEL
-
- 119 (0x77)
- The system does not support the command requested.
- ERROR_CALL_NOT_IMPLEMENTED
-
- 120 (0x78)
- This function is not supported on this system.
- ERROR_SEM_TIMEOUT
-
- 121 (0x79)
- The semaphore timeout period has expired.
- ERROR_INSUFFICIENT_BUFFER
-
- 122 (0x7A)
- The data area passed to a system call is too small.
- ERROR_INVALID_NAME
-
- 123 (0x7B)
- The filename, directory name, or volume label syntax is incorrect.
- ERROR_INVALID_LEVEL
-
- 124 (0x7C)
- The system call level is not correct.
- ERROR_NO_VOLUME_LABEL
-
- 125 (0x7D)
- The disk has no volume label.
- ERROR_MOD_NOT_FOUND
-
- 126 (0x7E)
- The specified module could not be found.
- ERROR_PROC_NOT_FOUND
-
- 127 (0x7F)
- The specified procedure could not be found.
- ERROR_WAIT_NO_CHILDREN
-
- 128 (0x80)
- There are no child processes to wait for.
- ERROR_CHILD_NOT_COMPLETE
-
- 129 (0x81)
- The %1 application cannot be run in Win32 mode.
- ERROR_DIRECT_ACCESS_HANDLE
-
- 130 (0x82)
- Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
- ERROR_NEGATIVE_SEEK
-
- 131 (0x83)
- An attempt was made to move the file pointer before the beginning of the file.
- ERROR_SEEK_ON_DEVICE
-
- 132 (0x84)
- The file pointer cannot be set on the specified device or file.
- ERROR_IS_JOIN_TARGET
-
- 133 (0x85)
- A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
- ERROR_IS_JOINED
-
- 134 (0x86)
- An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
- ERROR_IS_SUBSTED
-
- 135 (0x87)
- An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
- ERROR_NOT_JOINED
-
- 136 (0x88)
- The system tried to delete the JOIN of a drive that is not joined.
- ERROR_NOT_SUBSTED
-
- 137 (0x89)
- The system tried to delete the substitution of a drive that is not substituted.
- ERROR_JOIN_TO_JOIN
-
- 138 (0x8A)
- The system tried to join a drive to a directory on a joined drive.
- ERROR_SUBST_TO_SUBST
-
- 139 (0x8B)
- The system tried to substitute a drive to a directory on a substituted drive.
- ERROR_JOIN_TO_SUBST
-
- 140 (0x8C)
- The system tried to join a drive to a directory on a substituted drive.
- ERROR_SUBST_TO_JOIN
-
- 141 (0x8D)
- The system tried to SUBST a drive to a directory on a joined drive.
- ERROR_BUSY_DRIVE
-
- 142 (0x8E)
- The system cannot perform a JOIN or SUBST at this time.
- ERROR_SAME_DRIVE
-
- 143 (0x8F)
- The system cannot join or substitute a drive to or for a directory on the same drive.
- ERROR_DIR_NOT_ROOT
-
- 144 (0x90)
- The directory is not a subdirectory of the root directory.
- ERROR_DIR_NOT_EMPTY
-
- 145 (0x91)
- The directory is not empty.
- ERROR_IS_SUBST_PATH
-
- 146 (0x92)
- The path specified is being used in a substitute.
- ERROR_IS_JOIN_PATH
-
- 147 (0x93)
- Not enough resources are available to process this command.
- ERROR_PATH_BUSY
-
- 148 (0x94)
- The path specified cannot be used at this time.
- ERROR_IS_SUBST_TARGET
-
- 149 (0x95)
- An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
- ERROR_SYSTEM_TRACE
-
- 150 (0x96)
- System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
- ERROR_INVALID_EVENT_COUNT
-
- 151 (0x97)
- The number of specified semaphore events for DosMuxSemWait is not correct.
- ERROR_TOO_MANY_MUXWAITERS
-
- 152 (0x98)
- DosMuxSemWait did not execute; too many semaphores are already set.
- ERROR_INVALID_LIST_FORMAT
-
- 153 (0x99)
- The DosMuxSemWait list is not correct.
- ERROR_LABEL_TOO_LONG
-
- 154 (0x9A)
- The volume label you entered exceeds the label character limit of the target file system.
- ERROR_TOO_MANY_TCBS
-
- 155 (0x9B)
- Cannot create another thread.
- ERROR_SIGNAL_REFUSED
-
- 156 (0x9C)
- The recipient process has refused the signal.
- ERROR_DISCARDED
-
- 157 (0x9D)
- The segment is already discarded and cannot be locked.
- ERROR_NOT_LOCKED
-
- 158 (0x9E)
- The segment is already unlocked.
- ERROR_BAD_THREADID_ADDR
-
- 159 (0x9F)
- The address for the thread ID is not correct.
- ERROR_BAD_ARGUMENTS
-
- 160 (0xA0)
- One or more arguments are not correct.
- ERROR_BAD_PATHNAME
-
- 161 (0xA1)
- The specified path is invalid.
- ERROR_SIGNAL_PENDING
-
- 162 (0xA2)
- A signal is already pending.
- ERROR_MAX_THRDS_REACHED
-
- 164 (0xA4)
- No more threads can be created in the system.
- ERROR_LOCK_FAILED
-
- 167 (0xA7)
- Unable to lock a region of a file.
- ERROR_BUSY
-
- 170 (0xAA)
- The requested resource is in use.
- ERROR_DEVICE_SUPPORT_IN_PROGRESS
-
- 171 (0xAB)
- Device’s command support detection is in progress.
- ERROR_CANCEL_VIOLATION
-
- 173 (0xAD)
- A lock request was not outstanding for the supplied cancel region.
- ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
-
- 174 (0xAE)
- The file system does not support atomic changes to the lock type.
- ERROR_INVALID_SEGMENT_NUMBER
-
- 180 (0xB4)
- The system detected a segment number that was not correct.
- ERROR_INVALID_ORDINAL
-
- 182 (0xB6)
- The operating system cannot run %1.
- ERROR_ALREADY_EXISTS
-
- 183 (0xB7)
- Cannot create a file when that file already exists.
- ERROR_INVALID_FLAG_NUMBER
-
- 186 (0xBA)
- The flag passed is not correct.
- ERROR_SEM_NOT_FOUND
-
- 187 (0xBB)
- The specified system semaphore name was not found.
- ERROR_INVALID_STARTING_CODESEG
-
- 188 (0xBC)
- The operating system cannot run %1.
- ERROR_INVALID_STACKSEG
-
- 189 (0xBD)
- The operating system cannot run %1.
- ERROR_INVALID_MODULETYPE
-
- 190 (0xBE)
- The operating system cannot run %1.
- ERROR_INVALID_EXE_SIGNATURE
-
- 191 (0xBF)
- Cannot run %1 in Win32 mode.
- ERROR_EXE_MARKED_INVALID
-
- 192 (0xC0)
- The operating system cannot run %1.
- ERROR_BAD_EXE_FORMAT
-
- 193 (0xC1)
- %1 is not a valid Win32 application.
- ERROR_ITERATED_DATA_EXCEEDS_64k
-
- 194 (0xC2)
- The operating system cannot run %1.
- ERROR_INVALID_MINALLOCSIZE
-
- 195 (0xC3)
- The operating system cannot run %1.
- ERROR_DYNLINK_FROM_INVALID_RING
-
- 196 (0xC4)
- The operating system cannot run this application program.
- ERROR_IOPL_NOT_ENABLED
-
- 197 (0xC5)
- The operating system is not presently configured to run this application.
- ERROR_INVALID_SEGDPL
-
- 198 (0xC6)
- The operating system cannot run %1.
- ERROR_AUTODATASEG_EXCEEDS_64k
-
- 199 (0xC7)
- The operating system cannot run this application program.
- ERROR_RING2SEG_MUST_BE_MOVABLE
-
- 200 (0xC8)
- The code segment cannot be greater than or equal to 64K.
- ERROR_RELOC_CHAIN_XEEDS_SEGLIM
-
- 201 (0xC9)
- The operating system cannot run %1.
- ERROR_INFLOOP_IN_RELOC_CHAIN
-
- 202 (0xCA)
- The operating system cannot run %1.
- ERROR_ENVVAR_NOT_FOUND
-
- 203 (0xCB)
- The system could not find the environment option that was entered.
- ERROR_NO_SIGNAL_SENT
-
- 205 (0xCD)
- No process in the command subtree has a signal handler.
- ERROR_FILENAME_EXCED_RANGE
-
- 206 (0xCE)
- The filename or extension is too long.
- ERROR_RING2_STACK_IN_USE
-
- 207 (0xCF)
- The ring 2 stack is in use.
- ERROR_META_EXPANSION_TOO_LONG
-
- 208 (0xD0)
- The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
- ERROR_INVALID_SIGNAL_NUMBER
-
- 209 (0xD1)
- The signal being posted is not correct.
- ERROR_THREAD_1_INACTIVE
-
- 210 (0xD2)
- The signal handler cannot be set.
- ERROR_LOCKED
-
- 212 (0xD4)
- The segment is locked and cannot be reallocated.
- ERROR_TOO_MANY_MODULES
-
- 214 (0xD6)
- Too many dynamic-link modules are attached to this program or dynamic-link module.
- ERROR_NESTING_NOT_ALLOWED
-
- 215 (0xD7)
- Cannot nest calls to LoadModule.
- ERROR_EXE_MACHINE_TYPE_MISMATCH
-
- 216 (0xD8)
- This version of %1 is not compatible with the version of Windows you’re running. Check your computer’s system information and then contact the software publisher.
- ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY
-
- 217 (0xD9)
- The image file %1 is signed, unable to modify.
- ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY
-
- 218 (0xDA)
- The image file %1 is strong signed, unable to modify.
- ERROR_FILE_CHECKED_OUT
-
- 220 (0xDC)
- This file is checked out or locked for editing by another user.
- ERROR_CHECKOUT_REQUIRED
-
- 221 (0xDD)
- The file must be checked out before saving changes.
- ERROR_BAD_FILE_TYPE
-
- 222 (0xDE)
- The file type being saved or retrieved has been blocked.
- ERROR_FILE_TOO_LARGE
-
- 223 (0xDF)
- The file size exceeds the limit allowed and cannot be saved.
- ERROR_FORMS_AUTH_REQUIRED
-
- 224 (0xE0)
- Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.
- ERROR_VIRUS_INFECTED
-
- 225 (0xE1)
- Operation did not complete successfully because the file contains a virus or potentially unwanted software.
- ERROR_VIRUS_DELETED
-
- 226 (0xE2)
- This file contains a virus or potentially unwanted software and cannot be opened. Due to the nature of this virus or potentially unwanted software, the file has been removed from this location.
- ERROR_PIPE_LOCAL
-
- 229 (0xE5)
- The pipe is local.
- ERROR_BAD_PIPE
-
- 230 (0xE6)
- The pipe state is invalid.
- ERROR_PIPE_BUSY
-
- 231 (0xE7)
- All pipe instances are busy.
- ERROR_NO_DATA
-
- 232 (0xE8)
- The pipe is being closed.
- ERROR_PIPE_NOT_CONNECTED
-
- 233 (0xE9)
- No process is on the other end of the pipe.
- ERROR_MORE_DATA
-
- 234 (0xEA)
- More data is available.
- ERROR_VC_DISCONNECTED
-
- 240 (0xF0)
- The session was canceled.
- ERROR_INVALID_EA_NAME
-
- 254 (0xFE)
- The specified extended attribute name was invalid.
- ERROR_EA_LIST_INCONSISTENT
-
- 255 (0xFF)
- The extended attributes are inconsistent.
- WAIT_TIMEOUT
-
- 258 (0x102)
- The wait operation timed out.
- ERROR_NO_MORE_ITEMS
-
- 259 (0x103)
- No more data is available.
- ERROR_CANNOT_COPY
-
- 266 (0x10A)
- The copy functions cannot be used.
- ERROR_DIRECTORY
-
- 267 (0x10B)
- The directory name is invalid.
- ERROR_EAS_DIDNT_FIT
-
- 275 (0x113)
- The extended attributes did not fit in the buffer.
- ERROR_EA_FILE_CORRUPT
-
- 276 (0x114)
- The extended attribute file on the mounted file system is corrupt.
- ERROR_EA_TABLE_FULL
-
- 277 (0x115)
- The extended attribute table file is full.
- ERROR_INVALID_EA_HANDLE
-
- 278 (0x116)
- The specified extended attribute handle is invalid.
- ERROR_EAS_NOT_SUPPORTED
-
- 282 (0x11A)
- The mounted file system does not support extended attributes.
- ERROR_NOT_OWNER
-
- 288 (0x120)
- Attempt to release mutex not owned by caller.
- ERROR_TOO_MANY_POSTS
-
- 298 (0x12A)
- Too many posts were made to a semaphore.
- ERROR_PARTIAL_COPY
-
- 299 (0x12B)
- Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
- ERROR_OPLOCK_NOT_GRANTED
-
- 300 (0x12C)
- The oplock request is denied.
- ERROR_INVALID_OPLOCK_PROTOCOL
-
- 301 (0x12D)
- An invalid oplock acknowledgment was received by the system.
- ERROR_DISK_TOO_FRAGMENTED
-
- 302 (0x12E)
- The volume is too fragmented to complete this operation.
- ERROR_DELETE_PENDING
-
- 303 (0x12F)
- The file cannot be opened because it is in the process of being deleted.
- ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING
-
- 304 (0x130)
- Short name settings may not be changed on this volume due to the global registry setting.
- ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME
-
- 305 (0x131)
- Short names are not enabled on this volume.
- ERROR_SECURITY_STREAM_IS_INCONSISTENT
-
- 306 (0x132)
- The security stream for the given volume is in an inconsistent state. Please run CHKDSK on the volume.
- ERROR_INVALID_LOCK_RANGE
-
- 307 (0x133)
- A requested file lock operation cannot be processed due to an invalid byte range.
- ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT
-
- 308 (0x134)
- The subsystem needed to support the image type is not present.
- ERROR_NOTIFICATION_GUID_ALREADY_DEFINED
-
- 309 (0x135)
- The specified file already has a notification GUID associated with it.
- ERROR_INVALID_EXCEPTION_HANDLER
-
- 310 (0x136)
- An invalid exception handler routine has been detected.
- ERROR_DUPLICATE_PRIVILEGES
-
- 311 (0x137)
- Duplicate privileges were specified for the token.
- ERROR_NO_RANGES_PROCESSED
-
- 312 (0x138)
- No ranges for the specified operation were able to be processed.
- ERROR_NOT_ALLOWED_ON_SYSTEM_FILE
-
- 313 (0x139)
- Operation is not allowed on a file system internal file.
- ERROR_DISK_RESOURCES_EXHAUSTED
-
- 314 (0x13A)
- The physical resources of this disk have been exhausted.
- ERROR_INVALID_TOKEN
-
- 315 (0x13B)
- The token representing the data is invalid.
- ERROR_DEVICE_FEATURE_NOT_SUPPORTED
-
- 316 (0x13C)
- The device does not support the command feature.
- ERROR_MR_MID_NOT_FOUND
-
- 317 (0x13D)
- The system cannot find message text for message number 0x%1 in the message file for %2.
- ERROR_SCOPE_NOT_FOUND
-
- 318 (0x13E)
- The scope specified was not found.
- ERROR_UNDEFINED_SCOPE
-
- 319 (0x13F)
- The Central Access Policy specified is not defined on the target machine.
- ERROR_INVALID_CAP
-
- 320 (0x140)
- The Central Access Policy obtained from Active Directory is invalid.
- ERROR_DEVICE_UNREACHABLE
-
- 321 (0x141)
- The device is unreachable.
- ERROR_DEVICE_NO_RESOURCES
-
- 322 (0x142)
- The target device has insufficient resources to complete the operation.
- ERROR_DATA_CHECKSUM_ERROR
-
- 323 (0x143)
- A data integrity checksum error occurred. Data in the file stream is corrupt.
- ERROR_INTERMIXED_KERNEL_EA_OPERATION
-
- 324 (0x144)
- An attempt was made to modify both a KERNEL and normal Extended Attribute (EA) in the same operation.
- ERROR_FILE_LEVEL_TRIM_NOT_SUPPORTED
-
- 326 (0x146)
- Device does not support file-level TRIM.
- ERROR_OFFSET_ALIGNMENT_VIOLATION
-
- 327 (0x147)
- The command specified a data offset that does not align to the device’s granularity/alignment.
- ERROR_INVALID_FIELD_IN_PARAMETER_LIST
-
- 328 (0x148)
- The command specified an invalid field in its parameter list.
- ERROR_OPERATION_IN_PROGRESS
-
- 329 (0x149)
- An operation is currently in progress with the device.
- ERROR_BAD_DEVICE_PATH
-
- 330 (0x14A)
- An attempt was made to send down the command via an invalid path to the target device.
- ERROR_TOO_MANY_DESCRIPTORS
-
- 331 (0x14B)
- The command specified a number of descriptors that exceeded the maximum supported by the device.
- ERROR_SCRUB_DATA_DISABLED
-
- 332 (0x14C)
- Scrub is disabled on the specified file.
- ERROR_NOT_REDUNDANT_STORAGE
-
- 333 (0x14D)
- The storage device does not provide redundancy.
- ERROR_RESIDENT_FILE_NOT_SUPPORTED
-
- 334 (0x14E)
- An operation is not supported on a resident file.
- ERROR_COMPRESSED_FILE_NOT_SUPPORTED
-
- 335 (0x14F)
- An operation is not supported on a compressed file.
- ERROR_DIRECTORY_NOT_SUPPORTED
-
- 336 (0x150)
- An operation is not supported on a directory.
- ERROR_NOT_READ_FROM_COPY
-
- 337 (0x151)
- The specified copy of the requested data could not be read.
- ERROR_FAIL_NOACTION_REBOOT
-
- 350 (0x15E)
- No action was taken as a system reboot is required.
- ERROR_FAIL_SHUTDOWN
-
- 351 (0x15F)
- The shutdown operation failed.
- ERROR_FAIL_RESTART
-
- 352 (0x160)
- The restart operation failed.
- ERROR_MAX_SESSIONS_REACHED
-
- 353 (0x161)
- The maximum number of sessions has been reached.
- ERROR_THREAD_MODE_ALREADY_BACKGROUND
-
- 400 (0x190)
- The thread is already in background processing mode.
- ERROR_THREAD_MODE_NOT_BACKGROUND
-
- 401 (0x191)
- The thread is not in background processing mode.
- ERROR_PROCESS_MODE_ALREADY_BACKGROUND
-
- 402 (0x192)
- The process is already in background processing mode.
- ERROR_PROCESS_MODE_NOT_BACKGROUND
-
- 403 (0x193)
- The process is not in background processing mode.
- ERROR_INVALID_ADDRESS
-
- 487 (0x1E7)
- Attempt to access invalid address.
System Error Codes
(0-499)http://msdn.microsoft.com/en-us/library/windows/desktop/ms681382(v=vs.85).aspxSystem
Error Codes (0-499) System Error Codes (500-999) System Error Codes
(1000-1299) System Error Codes (1300-1699) System Error Codes
(1700-3999) System Error Codes (4000-5999) System Error Codes
(6000-8199) System Error Codes (8200-8999) System Error Codes
(9000-11999) System Error Codes (12000-15999)
Note The information on this page is intended to be used by
programmers so that the software they write can better deal with
errors. If you are an end-user that is experiencing difficulty with
an application you are installing or running, contact customer
support for the software that is displaying the error message. To
obtain support for a Microsoft product, go to
http://support.microsoft.com. The System Error Codes are very
broad. Each one can occur in one of many hundreds of locations in
the system. Consequently the descriptions of these codes cannot be
very specific. Use of these codes requires some amount of
investigation and analysis. You need to note both the programmatic
and the run-time context in which these errors occur. Because these
codes are defined in WinError.h for anyone to use, sometimes the
codes are returned by non-system software. Sometimes the code is
returned by a function deep in the stack and far removed from your
code that is handling the error. The following table provides a
list of system error codes (errors 0 to 499). They are returned by
the GetLastError function when many functions fail. To retrieve the
description text for the error in your application, use the
FormatMessage function with theFORMAT_MESSAGE_FROM_SYSTEM flag.
Constant/value ERROR_SUCCESS 0 (0x0) ERROR_INVALID_FUNCTION 1
(0x1) ERROR_FILE_NOT_FOUND 2 (0x2) ERROR_PATH_NOT_FOUND 3 (0x3)
ERROR_TOO_MANY_OPEN_FILES 4 (0x4) ERROR_ACCESS_DENIED 5 (0x5)
ERROR_INVALID_HANDLE 6 (0x6)
Description The operation completed successfully. Incorrect
function.
The system cannot find the file specified. The system cannot
find the path specified. The system cannot open the file. Access is
denied.
The handle is invalid.
1
ERROR_ARENA_TRASHED 7 (0x7) ERROR_NOT_ENOUGH_MEMORY 8 (0x8)
The storage control blocks were destroyed. Not enough storage is
available to process this command. The storage control block
address is invalid. The environment is incorrect.
ERROR_INVALID_BLOCK 9 (0x9) ERROR_BAD_ENVIRONMENT 10 (0xA)
ERROR_BAD_FORMAT 11 (0xB)
An attempt was made to load a program with an incorrect format.
The access code is invalid.
ERROR_INVALID_ACCESS 12 (0xC) ERROR_INVALID_DATA 13 (0xD)
ERROR_OUTOFMEMORY 14 (0xE)
The data is invalid.
Not enough storage is available to complete this operation. The
system cannot find the drive specified. The directory cannot be
removed. The system cannot move the file to a different disk drive.
There are no more files.
ERROR_INVALID_DRIVE 15 (0xF) ERROR_CURRENT_DIRECTORY 16 (0x10)
ERROR_NOT_SAME_DEVICE 17 (0x11) ERROR_NO_MORE_FILES 18 (0x12)
ERROR_WRITE_PROTECT 19 (0x13) ERROR_BAD_UNIT 20 (0x14)
ERROR_NOT_READY 21 (0x15) ERROR_BAD_COMMAND 22 (0x16) ERROR_CRC 23
(0x17) ERROR_BAD_LENGTH 24 (0x18)
The media is write protected.
The system cannot find the device specified. The device is not
ready.
The device does not recognize the command. Data error (cyclic
redundancy check). The program issued a command but the command
length is incorrect. The drive cannot locate a
ERROR_SEEK
2
25 (0x19)
specific area or track on the disk. The specified disk or
diskette cannot be accessed. The drive cannot find the sector
requested. The printer is out of paper.
ERROR_NOT_DOS_DISK 26 (0x1A) ERROR_SECTOR_NOT_FOUND 27 (0x1B)
ERROR_OUT_OF_PAPER 28 (0x1C) ERROR_WRITE_FAULT 29 (0x1D)
ERROR_READ_FAULT 30 (0x1E) ERROR_GEN_FAILURE 31 (0x1F)
ERROR_SHARING_VIOLATION 32 (0x20)
The system cannot write to the specified device. The system
cannot read from the specified device. A device attached to the
system is not functioning. The process cannot access the file
because it is being used by another process. The process cannot
access the file because another process has locked a portion of the
file. The wrong diskette is in the drive. Insert %2 (Volume Serial
Number: %3) into drive %1. Too many files opened for sharing.
Reached the end of the file.
ERROR_LOCK_VIOLATION 33 (0x21)
ERROR_WRONG_DISK 34 (0x22)
ERROR_SHARING_BUFFER_EXCEEDED 36 (0x24) ERROR_HANDLE_EOF 38
(0x26) ERROR_HANDLE_DISK_FULL 39 (0x27) ERROR_NOT_SUPPORTED 50
(0x32) ERROR_REM_NOT_LIST 51 (0x33)
The disk is full.
The request is not supported.
Windows cannot find the network path. Verify that the network
path is correct and the destination computer is not busy or turned
off. If Windows still cannot find the network path, contact your
network administrator. You were not connected because a duplicate
name exists on the network. If joining a domain, go to System in
Control Panel to change the
ERROR_DUP_NAME 52 (0x34)
3
computer name and try again. If joining a workgroup, choose
another workgroup name. ERROR_BAD_NETPATH 53 (0x35)
ERROR_NETWORK_BUSY 54 (0x36) ERROR_DEV_NOT_EXIST 55 (0x37)
ERROR_TOO_MANY_CMDS 56 (0x38) ERROR_ADAP_HDW_ERR 57 (0x39)
ERROR_BAD_NET_RESP 58 (0x3A) The network path was not found. The
network is busy.
The specified network resource or device is no longer available.
The network BIOS command limit has been reached. A network adapter
hardware error occurred. The specified server cannot perform the
requested operation. An unexpected network error occurred. The
remote adapter is not compatible. The printer queue is full.
ERROR_UNEXP_NET_ERR 59 (0x3B) ERROR_BAD_REM_ADAP 60 (0x3C)
ERROR_PRINTQ_FULL 61 (0x3D) ERROR_NO_SPOOL_SPACE 62 (0x3E)
Space to store the file waiting to be printed is not available
on the server. Your file waiting to be printed was deleted. The
specified network name is no longer available. Network access is
denied.
ERROR_PRINT_CANCELLED 63 (0x3F) ERROR_NETNAME_DELETED 64 (0x40)
ERROR_NETWORK_ACCESS_DENIED 65 (0x41) ERROR_BAD_DEV_TYPE 66 (0x42)
ERROR_BAD_NET_NAME 67 (0x43) ERROR_TOO_MANY_NAMES 68 (0x44)
The network resource type is not correct. The network name
cannot be found. The name limit for the local computer network
adapter card was exceeded. The network BIOS session limit was
exceeded. The remote server has been
ERROR_TOO_MANY_SESS 69 (0x45) ERROR_SHARING_PAUSED
4
70 (0x46)
paused or is in the process of being started. No more
connections can be made to this remote computer at this time
because there are already as many connections as the computer can
accept. The specified printer or disk device has been paused. The
file exists.
ERROR_REQ_NOT_ACCEP 71 (0x47)
ERROR_REDIR_PAUSED 72 (0x48) ERROR_FILE_EXISTS 80 (0x50)
ERROR_CANNOT_MAKE 82 (0x52) ERROR_FAIL_I24 83 (0x53)
ERROR_OUT_OF_STRUCTURES 84 (0x54) ERROR_ALREADY_ASSIGNED 85 (0x55)
ERROR_INVALID_PASSWORD 86 (0x56) ERROR_INVALID_PARAMETER 87 (0x57)
ERROR_NET_WRITE_FAULT 88 (0x58) ERROR_NO_PROC_SLOTS 89 (0x59)
ERROR_TOO_MANY_SEMAPHORES 100 (0x64) ERROR_EXCL_SEM_ALREADY_OWNED
101 (0x65) ERROR_SEM_IS_SET 102 (0x66) ERROR_TOO_MANY_SEM_REQUESTS
103 (0x67) ERROR_INVALID_AT_INTERRUPT_TIME 104 (0x68)
ERROR_SEM_OWNER_DIED 105 (0x69) ERROR_SEM_USER_LIMIT 106 (0x6A)
The directory or file cannot be created. Fail on INT 24.
Storage to process this request is not available. The local
device name is already in use. The specified network password is
not correct. The parameter is incorrect.
A write fault occurred on the network. The system cannot start
another process at this time. Cannot create another system
semaphore. The exclusive semaphore is owned by another process. The
semaphore is set and cannot be closed. The semaphore cannot be set
again. Cannot request exclusive semaphores at interrupt time. The
previous ownership of this semaphore has ended. Insert the diskette
for drive %1.
5
ERROR_DISK_CHANGE 107 (0x6B)
The program stopped because an alternate diskette was not
inserted. The disk is in use or locked by another process. The pipe
has been ended.
ERROR_DRIVE_LOCKED 108 (0x6C) ERROR_BROKEN_PIPE 109 (0x6D)
ERROR_OPEN_FAILED 110 (0x6E) ERROR_BUFFER_OVERFLOW 111 (0x6F)
ERROR_DISK_FULL 112 (0x70) ERROR_NO_MORE_SEARCH_HANDLES 113 (0x71)
ERROR_INVALID_TARGET_HANDLE 114 (0x72) ERROR_INVALID_CATEGORY 117
(0x75)
The system cannot open the device or file specified. The file
name is too long.
There is not enough space on the disk. No more internal file
identifiers available. The target internal file identifier is
incorrect. The IOCTL call made by the application program is not
correct. The verify-on-write switch parameter value is not correct.
The system does not support the command requested. This function is
not supported on this system. The semaphore timeout period has
expired. The data area passed to a system call is too small. The
filename, directory name, or volume label syntax is incorrect. The
system call level is not correct. The disk has no volume label.
ERROR_INVALID_VERIFY_SWITCH 118 (0x76) ERROR_BAD_DRIVER_LEVEL
119 (0x77) ERROR_CALL_NOT_IMPLEMENTED 120 (0x78) ERROR_SEM_TIMEOUT
121 (0x79) ERROR_INSUFFICIENT_BUFFER 122 (0x7A) ERROR_INVALID_NAME
123 (0x7B)
ERROR_INVALID_LEVEL 124 (0x7C) ERROR_NO_VOLUME_LABEL 125 (0x7D)
ERROR_MOD_NOT_FOUND 126 (0x7E) ERROR_PROC_NOT_FOUND 127 (0x7F)
The specified module could not be found. The specified procedure
could not be found.
6
ERROR_WAIT_NO_CHILDREN 128 (0x80) ERROR_CHILD_NOT_COMPLETE 129
(0x81) ERROR_DIRECT_ACCESS_HANDLE 130 (0x82)
There are no child processes to wait for. The %1 application
cannot be run in Win32 mode. Attempt to use a file handle to an
open disk partition for an operation other than raw disk I/O. An
attempt was made to move the file pointer before the beginning of
the file. The file pointer cannot be set on the specified device or
file. A JOIN or SUBST command cannot be used for a drive that
contains previously joined drives. An attempt was made to use a
JOIN or SUBST command on a drive that has already been joined. An
attempt was made to use a JOIN or SUBST command on a drive that has
already been substituted. The system tried to delete the JOIN of a
drive that is not joined. The system tried to delete the
substitution of a drive that is not substituted. The system tried
to join a drive to a directory on a joined drive. The system tried
to substitute a drive to a directory on a substituted drive. The
system tried to join a drive to a directory on a substituted drive.
The system tried to SUBST a drive to a directory on a joined drive.
The system cannot perform a JOIN or SUBST at this time.
ERROR_NEGATIVE_SEEK 131 (0x83)
ERROR_SEEK_ON_DEVICE 132 (0x84) ERROR_IS_JOIN_TARGET 133
(0x85)
ERROR_IS_JOINED 134 (0x86)
ERROR_IS_SUBSTED 135 (0x87)
ERROR_NOT_JOINED 136 (0x88)
ERROR_NOT_SUBSTED 137 (0x89)
ERROR_JOIN_TO_JOIN 138 (0x8A) ERROR_SUBST_TO_SUBST 139
(0x8B)
ERROR_JOIN_TO_SUBST 140 (0x8C)
ERROR_SUBST_TO_JOIN 141 (0x8D)
ERROR_BUSY_DRIVE 142 (0x8E)
7
ERROR_SAME_DRIVE 143 (0x8F)
The system cannot join or substitute a drive to or for a
directory on the same drive. The directory is not a subdirectory of
the root directory. The directory is not empty.
ERROR_DIR_NOT_ROOT 144 (0x90)
ERROR_DIR_NOT_EMPTY 145 (0x91) ERROR_IS_SUBST_PATH 146 (0x92)
ERROR_IS_JOIN_PATH 147 (0x93)
The path specified is being used in a substitute. Not enough
resources are available to process this command. The path specified
cannot be used at this time. An attempt was made to join or
substitute a drive for which a directory on the drive is the target
of a previous substitute. System trace information was not
specified in your CONFIG.SYS file, or tracing is disallowed. The
number of specified semaphore events for DosMuxSemWait is not
correct. DosMuxSemWait did not execute; too many semaphores are
already set. The DosMuxSemWait list is not correct. The volume
label you entered exceeds the label character limit of the target
file system. Cannot create another thread.
ERROR_PATH_BUSY 148 (0x94) ERROR_IS_SUBST_TARGET 149 (0x95)
ERROR_SYSTEM_TRACE 150 (0x96)
ERROR_INVALID_EVENT_COUNT 151 (0x97)
ERROR_TOO_MANY_MUXWAITERS 152 (0x98)
ERROR_INVALID_LIST_FORMAT 153 (0x99) ERROR_LABEL_TOO_LONG 154
(0x9A)
ERROR_TOO_MANY_TCBS 155 (0x9B) ERROR_SIGNAL_REFUSED 156 (0x9C)
ERROR_DISCARDED 157 (0x9D)
The recipient process has refused the signal. The segment is
already discarded and cannot be locked. The segment is already
unlocked.
ERROR_NOT_LOCKED 158 (0x9E)
8
ERROR_BAD_THREADID_ADDR 159 (0x9F) ERROR_BAD_ARGUMENTS 160
(0xA0) ERROR_BAD_PATHNAME 161 (0xA1) ERROR_SIGNAL_PENDING 162
(0xA2) ERROR_MAX_THRDS_REACHED 164 (0xA4) ERROR_LOCK_FAILED 167
(0xA7) ERROR_BUSY 170 (0xAA) ERROR_DEVICE_SUPPORT_IN_PROGRESS 171
(0xAB) ERROR_CANCEL_VIOLATION 173 (0xAD)
The address for the thread ID is not correct. One or more
arguments are not correct. The specified path is invalid.
A signal is already pending.
No more threads can be created in the system. Unable to lock a
region of a file. The requested resource is in use. Device’s
command support detection is in progress. A lock request was not
outstanding for the supplied cancel region. The file system does
not support atomic changes to the lock type. The system detected a
segment number that was not correct. The operating system cannot
run %1. Cannot create a file when that file already exists. The
flag passed is not correct.
ERROR_ATOMIC_LOCKS_NOT_SUPPORTED 174 (0xAE)
ERROR_INVALID_SEGMENT_NUMBER 180 (0xB4)
ERROR_INVALID_ORDINAL 182 (0xB6) ERROR_ALREADY_EXISTS 183 (0xB7)
ERROR_INVALID_FLAG_NUMBER 186 (0xBA) ERROR_SEM_NOT_FOUND 187
(0xBB)
The specified system semaphore name was not found. The operating
system cannot run %1. The operating system cannot run %1. The
operating system cannot run %1. Cannot run %1 in Win32 mode.
ERROR_INVALID_STARTING_CODESEG 188 (0xBC) ERROR_INVALID_STACKSEG
189 (0xBD) ERROR_INVALID_MODULETYPE 190 (0xBE)
ERROR_INVALID_EXE_SIGNATURE
9
191 (0xBF) ERROR_EXE_MARKED_INVALID 192 (0xC0)
ERROR_BAD_EXE_FORMAT 193 (0xC1) ERROR_ITERATED_DATA_EXCEEDS_64k 194
(0xC2) ERROR_INVALID_MINALLOCSIZE 195 (0xC3)
ERROR_DYNLINK_FROM_INVALID_RING 196 (0xC4) ERROR_IOPL_NOT_ENABLED
197 (0xC5) The operating system cannot run %1. %1 is not a valid
Win32 application. The operating system cannot run %1. The
operating system cannot run %1. The operating system cannot run
this application program. The operating system is not presently
configured to run this application. The operating system cannot run
%1. The operating system cannot run this application program. The
code segment cannot be greater than or equal to 64K. The operating
system cannot run %1. The operating system cannot run %1. The
system could not find the environment option that was entered. No
process in the command subtree has a signal handler. The filename
or extension is too long. The ring 2 stack is in use.
ERROR_INVALID_SEGDPL 198 (0xC6) ERROR_AUTODATASEG_EXCEEDS_64k
199 (0xC7) ERROR_RING2SEG_MUST_BE_MOVABLE 200 (0xC8)
ERROR_RELOC_CHAIN_XEEDS_SEGLIM 201 (0xC9)
ERROR_INFLOOP_IN_RELOC_CHAIN 202 (0xCA) ERROR_ENVVAR_NOT_FOUND 203
(0xCB)
ERROR_NO_SIGNAL_SENT 205 (0xCD) ERROR_FILENAME_EXCED_RANGE 206
(0xCE) ERROR_RING2_STACK_IN_USE 207 (0xCF)
ERROR_META_EXPANSION_TOO_LONG 208 (0xD0)
The global filename characters, * or ?, are entered incorrectly
or too many global filename characters are specified. The signal
being posted is not correct. The signal handler cannot be set.
ERROR_INVALID_SIGNAL_NUMBER 209 (0xD1) ERROR_THREAD_1_INACTIVE
210 (0xD2)
10
ERROR_LOCKED 212 (0xD4) ERROR_TOO_MANY_MODULES 214 (0xD6)
The segment is locked and cannot be reallocated. Too many
dynamic-link modules are attached to this program or dynamic-link
module. Cannot nest calls to LoadModule. This version of %1 is not
compatible with the version of Windows you’re running. Check your
computer’s system information to see whether you need a x86
(32-bit) or x64 (64-bit) version of the program, and then contact
the software publisher. The image file %1 is signed, unable to
modify. The image file %1 is strong signed, unable to modify. This
file is checked out or locked for editing by another user. The file
must be checked out before saving changes. The file type being
saved or retrieved has been blocked. The file size exceeds the
limit allowed and cannot be saved. Access Denied. Before opening
files in this location, you must first add the web site to your
trusted sites list, browse to the web site, and select the option
to login automatically. Operation did not complete successfully
because the file contains a virus or potentially unwanted software.
This file contains a virus or potentially unwanted software and
cannot be opened. Due to the nature of this virus or potentially
unwanted software, the file has been removed from this
location.
ERROR_NESTING_NOT_ALLOWED 215 (0xD7)
ERROR_EXE_MACHINE_TYPE_MISMATCH 216 (0xD8)
ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY 217 (0xD9)
ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY 218 (0xDA)
ERROR_FILE_CHECKED_OUT 220 (0xDC)
ERROR_CHECKOUT_REQUIRED 221 (0xDD) ERROR_BAD_FILE_TYPE 222
(0xDE) ERROR_FILE_TOO_LARGE 223 (0xDF) ERROR_FORMS_AUTH_REQUIRED
224 (0xE0)
ERROR_VIRUS_INFECTED 225 (0xE1)
ERROR_VIRUS_DELETED 226 (0xE2)
11
ERROR_PIPE_LOCAL 229 (0xE5) ERROR_BAD_PIPE 230 (0xE6)
ERROR_PIPE_BUSY 231 (0xE7) ERROR_NO_DATA 232 (0xE8)
ERROR_PIPE_NOT_CONNECTED 233 (0xE9) ERROR_MORE_DATA 234 (0xEA)
ERROR_VC_DISCONNECTED 240 (0xF0) ERROR_INVALID_EA_NAME 254 (0xFE)
ERROR_EA_LIST_INCONSISTENT 255 (0xFF) WAIT_TIMEOUT 258 (0x102)
ERROR_NO_MORE_ITEMS 259 (0x103) ERROR_CANNOT_COPY 266 (0x10A)
ERROR_DIRECTORY 267 (0x10B) ERROR_EAS_DIDNT_FIT 275 (0x113)
ERROR_EA_FILE_CORRUPT 276 (0x114)
The pipe is local.
The pipe state is invalid.
All pipe instances are busy.
The pipe is being closed.
No process is on the other end of the pipe. More data is
available.
The session was canceled.
The specified extended attribute name was invalid. The extended
attributes are inconsistent. The wait operation timed out.
No more data is available.
The copy functions cannot be used. The directory name is
invalid.
The extended attributes did not fit in the buffer. The extended
attribute file on the mounted file system is corrupt. The extended
attribute table file is full. The specified extended attribute
handle is invalid. The mounted file system does not support
extended attributes. Attempt to release mutex not owned by
caller.
ERROR_EA_TABLE_FULL 277 (0x115) ERROR_INVALID_EA_HANDLE 278
(0x116) ERROR_EAS_NOT_SUPPORTED 282 (0x11A)
ERROR_NOT_OWNER 288 (0x120)
12
ERROR_TOO_MANY_POSTS 298 (0x12A) ERROR_PARTIAL_COPY 299
(0x12B)
Too many posts were made to a semaphore. Only part of a
ReadProcessMemory or WriteProcessMemory request was completed. The
oplock request is denied.
ERROR_OPLOCK_NOT_GRANTED 300 (0x12C)
ERROR_INVALID_OPLOCK_PROTOCOL 301 (0x12D)
An invalid oplock acknowledgment was received by the system. The
volume is too fragmented to complete this operation. The file
cannot be opened because it is in the process of being deleted.
Short name settings may not be changed on this volume due to the
global registry setting. Short names are not enabled on this
volume. The security stream for the given volume is in an
inconsistent state. Please run CHKDSK on the volume. A requested
file lock operation cannot be processed due to an invalid byte
range. The subsystem needed to support the image type is not
present. The specified file already has a notification GUID
associated with it. An invalid exception handler routine has been
detected. Duplicate privileges were specified for the token. No
ranges for the specified operation were able to be processed.
Operation is not allowed on a file system internal file.
ERROR_DISK_TOO_FRAGMENTED 302 (0x12E) ERROR_DELETE_PENDING 303
(0x12F)
ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING 304
(0x130)
ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME 305 (0x131)
ERROR_SECURITY_STREAM_IS_INCONSISTENT 306 (0x132)
ERROR_INVALID_LOCK_RANGE 307 (0x133)
ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT 308 (0x134)
ERROR_NOTIFICATION_GUID_ALREADY_DEFINED 309 (0x135)
ERROR_INVALID_EXCEPTION_HANDLER 310 (0x136)
ERROR_DUPLICATE_PRIVILEGES 311 (0x137) ERROR_NO_RANGES_PROCESSED
312 (0x138)
ERROR_NOT_ALLOWED_ON_SYSTEM_FILE 313 (0x139)
13
ERROR_DISK_RESOURCES_EXHAUSTED 314 (0x13A) ERROR_INVALID_TOKEN
315 (0x13B) ERROR_DEVICE_FEATURE_NOT_SUPPORTED 316 (0x13C)
ERROR_MR_MID_NOT_FOUND 317 (0x13D)
The physical resources of this disk have been exhausted. The
token representing the data is invalid. The device does not support
the command feature. The system cannot find message text for
message number 0x%1 in the message file for %2. The scope specified
was not found. The Central Access Policy specified is not defined
on the target machine. The Central Access Policy obtained from
Active Directory is invalid. The device is unreachable.
ERROR_SCOPE_NOT_FOUND 318 (0x13E) ERROR_UNDEFINED_SCOPE 319
(0x13F)
ERROR_INVALID_CAP 320 (0x140)
ERROR_DEVICE_UNREACHABLE 321 (0x141) ERROR_DEVICE_NO_RESOURCES
322 (0x142)
The target device has insufficient resources to complete the
operation. A data integrity checksum error occurred. Data in the
file stream is corrupt. An attempt was made to modify both a KERNEL
and normal Extended Attribute (EA) in the same operation. Device
does not support filelevel TRIM. The command specified a data
offset that does not align to the device’s granularity/alignment.
The command specified an invalid field in its parameter list. An
operation is currently in progress with the device. An attempt was
made to send down the command via an invalid path to the target
ERROR_DATA_CHECKSUM_ERROR 323 (0x143)
ERROR_INTERMIXED_KERNEL_EA_OPERATION 324 (0x144)
ERROR_FILE_LEVEL_TRIM_NOT_SUPPORTED 326 (0x146)
ERROR_OFFSET_ALIGNMENT_VIOLATION 327 (0x147)
ERROR_INVALID_FIELD_IN_PARAMETER_LIST 328 (0x148)
ERROR_OPERATION_IN_PROGRESS 329 (0x149) ERROR_BAD_DEVICE_PATH
330 (0x14A)
14
device. ERROR_TOO_MANY_DESCRIPTORS 331 (0x14B) The command
specified a number of descriptors that exceeded the maximum
supported by the device. Scrub is disabled on the specified file.
The storage device does not provide redundancy. An operation is not
supported on a resident file. An operation is not supported on a
compressed file. An operation is not supported on a directory. No
action was taken as a system reboot is required. The shutdown
operation failed.
ERROR_SCRUB_DATA_DISABLED 332 (0x14C)
ERROR_NOT_REDUNDANT_STORAGE 333 (0x14D)
ERROR_RESIDENT_FILE_NOT_SUPPORTED 334 (0x14E)
ERROR_COMPRESSED_FILE_NOT_SUPPORTED 335 (0x14F)
ERROR_DIRECTORY_NOT_SUPPORTED 336 (0x150)
ERROR_FAIL_NOACTION_REBOOT 350 (0x15E) ERROR_FAIL_SHUTDOWN 351
(0x15F) ERROR_FAIL_RESTART 352 (0x160) ERROR_MAX_SESSIONS_REACHED
353 (0x161) ERROR_THREAD_MODE_ALREADY_BACKGROUND 400 (0x190)
ERROR_THREAD_MODE_NOT_BACKGROUND 401 (0x191)
ERROR_PROCESS_MODE_ALREADY_BACKGROUND 402 (0x192)
ERROR_PROCESS_MODE_NOT_BACKGROUND 403 (0x193) ERROR_INVALID_ADDRESS
487 (0x1E7)
The restart operation failed.
The maximum number of sessions has been reached. The thread is
already in background processing mode. The thread is not in
background processing mode. The process is already in background
processing mode. The process is not in background processing mode.
Attempt to access invalid address.
Constant/value ERROR_USER_PROFILE_LOAD 500 (0x1F4)
ERROR_ARITHMETIC_OVERFLOW 534 (0x216)
Description User profile cannot be loaded.
Arithmetic result exceeded 32 bits.
15
ERROR_PIPE_CONNECTED 535 (0x217) ERROR_PIPE_LISTENING 536
(0x218) ERROR_VERIFIER_STOP 537 (0x219) ERROR_ABIOS_ERROR 538
(0x21A) ERROR_WX86_WARNING 539 (0x21B) ERROR_WX86_ERROR 540 (0x21C)
ERROR_TIMER_NOT_CANCELED 541 (0x21D)
There is a process on other end of the pipe. Waiting for a
process to open the other end of the pipe. Application verifier has
found an error in the current process. An error occurred in the
ABIOS subsystem. A warning occurred in the WX86 subsystem. An error
occurred in the WX86 subsystem. An attempt was made to cancel or
set a timer that has an associated APC and the subject thread is
not the thread that originally set the timer with an associated APC
routine. Unwind exception code.
ERROR_UNWIND 542 (0x21E) ERROR_BAD_STACK 543 (0x21F)
An invalid or unaligned stack was encountered during an unwind
operation. An invalid unwind target was encountered during an
unwind operation. Invalid Object Attributes specified to
NtCreatePort or invalid Port Attributes specified to NtConnectPort
Length of message passed to NtRequestPort or NtRequestWaitReplyPort
was longer than the maximum message allowed by the port. An attempt
was made to lower a quota limit below the current usage. An attempt
was made to attach to a device that was already attached to another
device. An attempt was made to execute an instruction at an
unaligned address and the host system does not support unaligned
instruction references.
ERROR_INVALID_UNWIND_TARGET 544 (0x220)
ERROR_INVALID_PORT_ATTRIBUTES 545 (0x221)
ERROR_PORT_MESSAGE_TOO_LONG 546 (0x222)
ERROR_INVALID_QUOTA_LOWER 547 (0x223)
ERROR_DEVICE_ALREADY_ATTACHED 548 (0x224)
ERROR_INSTRUCTION_MISALIGNMENT 549 (0x225)
16
ERROR_PROFILING_NOT_STARTED 550 (0x226)
ERROR_PROFILING_NOT_STOPPED 551 (0x227) ERROR_COULD_NOT_INTERPRET
552 (0x228) ERROR_PROFILING_AT_LIMIT 553 (0x229)
Profiling not started.
Profiling not stopped.
The passed ACL did not contain the minimum required information.
The number of active profiling objects is at the maximum and no
more may be started. Used to indicate that an operation cannot
continue without blocking for I/O. Indicates that a thread
attempted to terminate itself by default (called NtTerminateThread
with NULL) and it was the last thread in the current process. If an
MM error is returned which is not defined in the standard FsRtl
filter, it is converted to one of the following errors which is
guaranteed to be in the filter. In this case information is lost,
however, the filter correctly handles the exception. If an MM error
is returned which is not defined in the standard FsRtl filter, it
is converted to one of the following errors which is guaranteed to
be in the filter. In this case information is lost, however, the
filter correctly handles the exception. If an MM error is returned
which is not defined in the standard FsRtl filter, it is converted
to one of the following errors which is guaranteed to be in the
filter. In this case information is lost, however, the filter
correctly handles the exception. A malformed function table was
encountered during an unwind operation. Indicates that an attempt
was made to assign protection to a file system file or directory
and one of the SIDs in the security descriptor could not be
translated into a GUID that could be stored by the file system.
This causes the protection attempt to fail, which may cause a file
creation
ERROR_CANT_WAIT 554 (0x22A)
ERROR_CANT_TERMINATE_SELF 555 (0x22B)
ERROR_UNEXPECTED_MM_CREATE_ERR 556 (0x22C)
ERROR_UNEXPECTED_MM_MAP_ERROR 557 (0x22D)
ERROR_UNEXPECTED_MM_EXTEND_ERR 558 (0x22E)
ERROR_BAD_FUNCTION_TABLE 559 (0x22F)
ERROR_NO_GUID_TRANSLATION 560 (0x230)
17
attempt to fail. ERROR_INVALID_LDT_SIZE 561 (0x231) Indicates
that an attempt was made to grow an LDT by setting its size, or
that the size was not an even number of selectors. Indicates that
the starting value for the LDT information was not an integral
multiple of the selector size. Indicates that the user supplied an
invalid descriptor when trying to set up Ldt descriptors. Indicates
a process has too many threads to perform the requested action. For
example, assignment of a primary token may only be performed when a
process has zero or one threads. An attempt was made to operate on
a thread within a specific process, but the thread specified is not
in the process specified. Page file quota was exceeded.
ERROR_INVALID_LDT_OFFSET 563 (0x233)
ERROR_INVALID_LDT_DESCRIPTOR 564 (0x234)
ERROR_TOO_MANY_THREADS 565 (0x235)
ERROR_THREAD_NOT_IN_PROCESS 566 (0x236)
ERROR_PAGEFILE_QUOTA_EXCEEDED 567 (0x237)
ERROR_LOGON_SERVER_CONFLICT 568 (0x238)
The Netlogon service cannot start because another Netlogon
service running in the domain conflicts with the specified role.
The SAM database on a Windows Server is significantly out of
synchronization with the copy on the Domain Controller. A complete
synchronization is required. The NtCreateFile API failed. This
error should never be returned to an application, it is a place
holder for the Windows Lan Manager Redirector to use in its
internal error mapping routines. {Privilege Failed} The I/O
permissions for the process could not be changed. {Application Exit
by CTRL+C} The application terminated as a result of a CTRL+C.
{Missing System File} The required system file %hs is bad or
missing.
ERROR_SYNCHRONIZATION_REQUIRED 569 (0x239)
ERROR_NET_OPEN_FAILED 570 (0x23A)
ERROR_IO_PRIVILEGE_FAILED 571 (0x23B)
ERROR_CONTROL_C_EXIT 572 (0x23C)
ERROR_MISSING_SYSTEMFILE 573 (0x23D)
18
ERROR_UNHANDLED_EXCEPTION 574 (0x23E)
{Application Error} The exception %s (0x%08lx) occurred in the
application at location 0x%08lx. {Application Error} The
application was unable to start correctly (0x%lx). Click OK to
close the application. {Unable to Create Paging File} The creation
of the paging file %hs failed (%lx). The requested size was %ld.
Windows cannot verify the digital signature for this file. A recent
hardware or software change might have installed a file that is
signed incorrectly or damaged, or that might be malicious software
from an unknown source. {No Paging File Specified} No paging file
was specified in the system configuration. {EXCEPTION} A real-mode
application issued a floating-point instruction and floating-point
hardware is not present. An event pair synchronization operation
was performed using the thread specific client/server event pair
object, but no event pair object was associated with the thread. A
Windows Server has an incorrect configuration. An illegal character
was encountered. For a multi-byte character set this includes a
lead byte without a succeeding trail byte. For the Unicode
character set this includes the characters 0xFFFF and 0xFFFE. The
Unicode character is not defined in the Unicode character set
installed on the system. The paging file cannot be created on a
floppy diskette. The system BIOS failed to connect a system
interrupt to the device or bus for which the device is connected.
This operation is only allowed for the Primary Domain Controller of
the domain.
ERROR_APP_INIT_FAILURE 575 (0x23F)
ERROR_PAGEFILE_CREATE_FAILED 576 (0x240)
ERROR_INVALID_IMAGE_HASH 577 (0x241)
ERROR_NO_PAGEFILE 578 (0x242)
ERROR_ILLEGAL_FLOAT_CONTEXT 579 (0x243)
ERROR_NO_EVENT_PAIR 580 (0x244)
ERROR_DOMAIN_CTRLR_CONFIG_ERROR 581 (0x245)
ERROR_ILLEGAL_CHARACTER 582 (0x246)
ERROR_UNDEFINED_CHARACTER 583 (0x247)
ERROR_FLOPPY_VOLUME 584 (0x248)
ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT 585 (0x249)
ERROR_BACKUP_CONTROLLER 586 (0x24A)
19
ERROR_MUTANT_LIMIT_EXCEEDED 587 (0x24B)
An attempt was made to acquire a mutant such that its maximum
count would have been exceeded. A volume has been accessed for
which a file system driver is required that has not yet been
loaded. {Registry File Failure} The registry cannot load the hive
(file): %hs or its log or alternate. It is corrupt, absent, or not
writable. {Unexpected Failure in DebugActiveProcess} An unexpected
failure occurred while processing a DebugActiveProcess API request.
You may choose OK to terminate the process, or Cancel to ignore the
error. {Fatal System Error} The %hs system process terminated
unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system
has been shut down. {Data Not Accepted} The TDI client could not
handle the data received during an indication. NTVDM encountered a
hard error.
ERROR_FS_DRIVER_REQUIRED 588 (0x24C)
ERROR_CANNOT_LOAD_REGISTRY_FILE 589 (0x24D)
ERROR_DEBUG_ATTACH_FAILED 590 (0x24E)
ERROR_SYSTEM_PROCESS_TERMINATED 591 (0x24F)
ERROR_DATA_NOT_ACCEPTED 592 (0x250)
ERROR_VDM_HARD_ERROR 593 (0x251) ERROR_DRIVER_CANCEL_TIMEOUT 594
(0x252)
{Cancel Timeout} The driver %hs failed to complete a cancelled
I/O request in the allotted time. {Reply Message Mismatch} An
attempt was made to reply to an LPC message, but the thread
specified by the client ID in the message was not waiting on that
message. {Delayed Write Failed} Windows was unable to save all the
data for the file %hs. The data has been lost. This error may be
caused by a failure of your computer hardware or network
connection. Please try to save this file elsewhere. The
parameter(s) passed to the server in the client/server shared
memory window were invalid. Too much data may have been put in the
shared memory window. The stream is not a tiny stream.
ERROR_REPLY_MESSAGE_MISMATCH 595 (0x253)
ERROR_LOST_WRITEBEHIND_DATA 596 (0x254)
ERROR_CLIENT_SERVER_PARAMETERS_INVALID 597 (0x255)
ERROR_NOT_TINY_STREAM
20
598 (0x256) ERROR_STACK_OVERFLOW_READ 599 (0x257)
ERROR_CONVERT_TO_LARGE 600 (0x258) The request must be handled by
the stack overflow code. Internal OFS status codes indicating how
an allocation operation is handled. Either it is retried after the
containing onode is moved or the extent stream is converted to a
large stream. The attempt to find the object found an object
matching by ID on the volume but it is out of the scope of the
handle used for the operation. The bucket array must be grown.
Retry transaction after doing so. The user/kernel marshalling
buffer has overflowed. The supplied variant structure contains
invalid data. The specified buffer contains illformed data. {Audit
Failed} An attempt to generate a security audit failed. The timer
resolution was not previously set by the current process. There is
insufficient account information to log you on. {Invalid DLL
Entrypoint} The dynamic link library %hs is not written correctly.
The stack pointer has been left in an inconsistent state. The
entrypoint should be declared as WINAPI or STDCALL. Select YES to
fail the DLL load. Select NO to continue execution. Selecting NO
may cause the application to operate incorrectly. {Invalid Service
Callback Entrypoint} The %hs service is not written correctly. The
stack pointer has been left in an inconsistent state. The callback
entrypoint should be declared as WINAPI or STDCALL. Selecting OK
will cause the service to continue operation. However, the service
process may operate incorrectly.
ERROR_FOUND_OUT_OF_SCOPE 601 (0x259)
ERROR_ALLOCATE_BUCKET 602 (0x25A) ERROR_MARSHALL_OVERFLOW 603
(0x25B) ERROR_INVALID_VARIANT 604 (0x25C)
ERROR_BAD_COMPRESSION_BUFFER 605 (0x25D) ERROR_AUDIT_FAILED 606
(0x25E) ERROR_TIMER_RESOLUTION_NOT_SET 607 (0x25F)
ERROR_INSUFFICIENT_LOGON_INFO 608 (0x260) ERROR_BAD_DLL_ENTRYPOINT
609 (0x261)
ERROR_BAD_SERVICE_ENTRYPOINT 610 (0x262)
21
ERROR_IP_ADDRESS_CONFLICT1 611 (0x263)
ERROR_IP_ADDRESS_CONFLICT2 612 (0x264) ERROR_REGISTRY_QUOTA_LIMIT
613 (0x265)
There is an IP address conflict with another system on the
network. There is an IP address conflict with another system on the
network. {Low On Registry Space} The system has reached the maximum
size allowed for the system part of the registry. Additional
storage requests will be ignored. A callback return system service
cannot be executed when no callback is active. The password
provided is too short to meet the policy of your user account.
Please choose a longer password. The policy of your user account
does not allow you to change passwords too frequently. This is done
to prevent users from changing back to a familiar, but potentially
discovered, password. If you feel your password has been
compromised then please contact your administrator immediately to
have a new one assigned. You have attempted to change your password
to one that you have used in the past. The policy of your user
account does not allow this. Please select a password that you have
not previously used. The specified compression format is
unsupported. The specified hardware profile configuration is
invalid. The specified Plug and Play registry device path is
invalid. The specified quota list is internally inconsistent with
its descriptor. {Windows Evaluation Notification} The evaluation
period for this installation of Windows has expired. This system
will shutdown in 1 hour. To restore access to this installation of
Windows, please upgrade this installation using a licensed
distribution of this product.
ERROR_NO_CALLBACK_ACTIVE 614 (0x266)
ERROR_PWD_TOO_SHORT 615 (0x267)
ERROR_PWD_TOO_RECENT 616 (0x268)
ERROR_PWD_HISTORY_CONFLICT 617 (0x269)
ERROR_UNSUPPORTED_COMPRESSION 618 (0x26A)
ERROR_INVALID_HW_PROFILE 619 (0x26B)
ERROR_INVALID_PLUGPLAY_DEVICE_PATH 620 (0x26C)
ERROR_QUOTA_LIST_INCONSISTENT 621 (0x26D)
ERROR_EVALUATION_EXPIRATION 622 (0x26E)
22
ERROR_ILLEGAL_DLL_RELOCATION 623 (0x26F)
{Illegal System DLL Relocation} The system DLL %hs was relocated
in memory. The application will not run properly. The relocation
occurred because the DLL %hs occupied an address range reserved for
Windows system DLLs. The vendor supplying the DLL should be
contacted for a new DLL. {DLL Initialization Failed} The
application failed to initialize because the window station is
shutting down. The validation process needs to continue on to the
next step. There are no more matches for the current index
enumeration. The range could not be added to the range list because
of a conflict. The server process is running under a SID different
than that required by client. A group marked use for deny only
cannot be enabled. {EXCEPTION} Multiple floating point faults.
{EXCEPTION} Multiple floating point traps. The requested interface
is not supported. {System Standby Failed} The driver %hs does not
support standby mode. Updating this driver may allow the system to
go to standby mode. The system file %1 has become corrupt and has
been replaced. {Virtual Memory Minimum Too Low} Your system is low
on virtual memory. Windows is increasing the size of your virtual
memory paging file. During this process, memory requests for some
applications may be denied. For more information, see Help. A
device was removed so enumeration must be restarted.
ERROR_DLL_INIT_FAILED_LOGOFF 624 (0x270)
ERROR_VALIDATE_CONTINUE 625 (0x271) ERROR_NO_MORE_MATCHES 626
(0x272) ERROR_RANGE_LIST_CONFLICT 627 (0x273)
ERROR_SERVER_SID_MISMATCH 628 (0x274)
ERROR_CANT_ENABLE_DENY_ONLY 629 (0x275)
ERROR_FLOAT_MULTIPLE_FAULTS 630 (0x276) ERROR_FLOAT_MULTIPLE_TRAPS
631 (0x277) ERROR_NOINTERFACE 632 (0x278) ERROR_DRIVER_FAILED_SLEEP
633 (0x279)
ERROR_CORRUPT_SYSTEM_FILE 634 (0x27A) ERROR_COMMITMENT_MINIMUM
635 (0x27B)
ERROR_PNP_RESTART_ENUMERATION 636 (0x27C)
23
ERROR_SYSTEM_IMAGE_BAD_SIGNATURE 637 (0x27D)
{Fatal System Error} The system image %s is not properly signed.
The file has been replaced with the signed file. The system has
been shut down. Device will not start without a reboot.
ERROR_PNP_REBOOT_REQUIRED 638 (0x27E) ERROR_INSUFFICIENT_POWER
639 (0x27F) ERROR_MULTIPLE_FAULT_VIOLATION 640 (0x280)
ERROR_SYSTEM_SHUTDOWN 641 (0x281) ERROR_PORT_NOT_SET 642
(0x282)
There is not enough power to complete the requested operation.
ERROR_MULTIPLE_FAULT_VIOLATION
The system is in the process of shutting down. An attempt to
remove a processes DebugPort was made, but a port was not already
associated with the process. This version of Windows is not
compatible with the behavior version of directory forest, domain or
domain controller. The specified range could not be found in the
range list. The driver was not loaded because the system is booting
into safe mode. The driver was not loaded because it failed its
initialization call. The «%hs» encountered an error while applying
power or reading the device configuration. This may be caused by a
failure of your hardware or by a poor connection. The create
operation failed because the name contained at least one mount
point which resolves to a volume to which the specified device
object is not attached. The device object parameter is either not a
valid device object or is not attached to the volume specified by
the file name. A Machine Check Error has occurred. Please check the
system eventlog for additional information.
ERROR_DS_VERSION_CHECK_FAILURE 643 (0x283)
ERROR_RANGE_NOT_FOUND 644 (0x284) ERROR_NOT_SAFE_MODE_DRIVER 646
(0x286)
ERROR_FAILED_DRIVER_ENTRY 647 (0x287)
ERROR_DEVICE_ENUMERATION_ERROR 648 (0x288)
ERROR_MOUNT_POINT_NOT_RESOLVED 649 (0x289)
ERROR_INVALID_DEVICE_OBJECT_PARAMETER 650 (0x28A)
ERROR_MCA_OCCURED 651 (0x28B)
24
ERROR_DRIVER_DATABASE_ERROR 652 (0x28C)
ERROR_SYSTEM_HIVE_TOO_LARGE 653 (0x28D)
ERROR_DRIVER_FAILED_PRIOR_UNLOAD 654 (0x28E)
There was error [%2] processing the driver database. System hive
size has exceeded its limit. The driver could not be loaded because
a previous version of the driver is still in memory. {Volume Shadow
Copy Service} Please wait while the Volume Shadow Copy Service
prepares volume %hs for hibernation. The system has failed to
hibernate (The error code is %hs). Hibernation will be disabled
until the system is restarted. The requested operation could not be
completed due to a file system limitation. An assertion failure has
occurred.
ERROR_VOLSNAP_PREPARE_HIBERNATE 655 (0x28F)
ERROR_HIBERNATION_FAILURE 656 (0x290)
ERROR_FILE_SYSTEM_LIMITATION 665 (0x299)
ERROR_ASSERTION_FAILURE 668 (0x29C) ERROR_ACPI_ERROR 669 (0x29D)
ERROR_WOW_ASSERTION 670 (0x29E) ERROR_PNP_BAD_MPS_TABLE 671
(0x29F)
An error occurred in the ACPI subsystem. WOW Assertion
Error.
A device is missing in the system BIOS MPS table. This device
will not be used. Please contact your system vendor for system BIOS
update. A translator failed to translate resources. A IRQ
translator failed to translate resources. Driver %2 returned
invalid ID for a child device (%3). {Kernel Debugger Awakened} the
system debugger was awakened by an interrupt. {Handles Closed}
Handles to objects have been automatically closed as a result of
the requested operation. {Too Much Information} The specified
access control list (ACL) contained more information than was
expected.
ERROR_PNP_TRANSLATION_FAILED 672 (0x2A0)
ERROR_PNP_IRQ_TRANSLATION_FAILED 673 (0x2A1) ERROR_PNP_INVALID_ID
674 (0x2A2) ERROR_WAKE_SYSTEM_DEBUGGER 675 (0x2A3)
ERROR_HANDLES_CLOSED 676 (0x2A4)
ERROR_EXTRANEOUS_INFORMATION 677 (0x2A5)
25
ERROR_RXACT_COMMIT_NECESSARY 678 (0x2A6)
This warning level status indicates that the transaction state
already exists for the registry sub-tree, but that a transaction
commit was previously aborted. The commit has NOT been completed,
but has not been rolled back either (so it may still be committed
if desired). {Media Changed} The media may have changed. {GUID
Substitution} During the translation of a global identifier (GUID)
to a Windows security ID (SID), no administratively-defined GUID
prefix was found. A substitute prefix was used, which will not
compromise system security. However, this may provide a more
restrictive access than intended. The create operation stopped
after reaching a symbolic link. A long jump has been executed.
ERROR_MEDIA_CHECK 679 (0x2A7) ERROR_GUID_SUBSTITUTION_MADE 680
(0x2A8)
ERROR_STOPPED_ON_SYMLINK 681 (0x2A9) ERROR_LONGJUMP 682 (0x2AA)
ERROR_PLUGPLAY_QUERY_VETOED 683 (0x2AB) ERROR_UNWIND_CONSOLIDATE
684 (0x2AC) ERROR_REGISTRY_HIVE_RECOVERED 685 (0x2AD)
The Plug and Play query operation was not successful. A frame
consolidation has been executed. {Registry Hive Recovered} Registry
hive (file): %hs was corrupted and it has been recovered. Some data
might have been lost. The application is attempting to run
executable code from the module %hs. This may be insecure. An
alternative, %hs, is available. Should the application use the
secure module %hs? The application is loading executable code from
the module %hs. This is secure, but may be incompatible with
previous releases of the operating system. An alternative, %hs, is
available. Should the application use the secure module %hs?
Debugger did not handle the exception. Debugger will reply
later.
ERROR_DLL_MIGHT_BE_INSECURE 686 (0x2AE)
ERROR_DLL_MIGHT_BE_INCOMPATIBLE 687 (0x2AF)
ERROR_DBG_EXCEPTION_NOT_HANDLED 688 (0x2B0)
ERROR_DBG_REPLY_LATER 689 (0x2B1)
26
ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE 690 (0x2B2)
ERROR_DBG_TERMINATE_THREAD 691 (0x2B3) ERROR_DBG_TERMINATE_PROCESS
692 (0x2B4) ERROR_DBG_CONTROL_C 693 (0x2B5)
ERROR_DBG_PRINTEXCEPTION_C 694 (0x2B6) ERROR_DBG_RIPEXCEPTION 695
(0x2B7) ERROR_DBG_CONTROL_BREAK 696 (0x2B8)
ERROR_DBG_COMMAND_EXCEPTION 697 (0x2B9) ERROR_OBJECT_NAME_EXISTS
698 (0x2BA)
Debugger cannot provide handle.
Debugger terminated thread.
Debugger terminated process.
Debugger got control C.
Debugger printed exception on control C. Debugger received RIP
exception.
Debugger received control break.
Debugger command communication exception. {Object Exists} An
attempt was made to create an object and the object name already
existed. {Thread Suspended} A thread termination occurred while the
thread was suspended. The thread was resumed, and termination
proceeded. {Image Relocated} An image file could not be mapped at
the address specified in the image file. Local fixups must be
performed on this image. This informational level status indicates
that a specified registry sub-tree transaction state did not yet
exist and had to be created. {Segment Load} A virtual DOS machine
(VDM) is loading, unloading, or moving an MS-DOS or Win16 program
segment image. An exception is raised so a debugger can load,
unload or track symbols and breakpoints within these 16-bit
segments. {Invalid Current Directory} The process cannot switch to
the startup current directory %hs. Select OK to set current
directory to %hs, or select CANCEL to exit.
ERROR_THREAD_WAS_SUSPENDED 699 (0x2BB)
ERROR_IMAGE_NOT_AT_BASE 700 (0x2BC)
ERROR_RXACT_STATE_CREATED 701 (0x2BD)
ERROR_SEGMENT_NOTIFICATION 702 (0x2BE)
ERROR_BAD_CURRENT_DIRECTORY 703 (0x2BF)
27
ERROR_FT_READ_RECOVERY_FROM_BACKUP 704 (0x2C0)
{Redundant Read} To satisfy a read request, the NT
fault-tolerant file system successfully read the requested data
from a redundant copy. This was done because the file system
encountered a failure on a member of the fault-tolerant volume, but
was unable to reassign the failing area of the device. {Redundant
Write} To satisfy a write request, the NT fault-tolerant file
system successfully wrote a redundant copy of the information. This
was done because the file system encountered a failure on a member
of the fault-tolerant volume, but was not able to reassign the
failing area of the device. {Machine Type Mismatch} The image file
%hs is valid, but is for a machine type other than the current
machine. Select OK to continue, or CANCEL to fail the DLL load.
{Partial Data Received} The network transport returned partial data
to its client. The remaining data will be sent later. {Expedited
Data Received} The network transport returned data to its client
that was marked as expedited by the remote system. {Partial
Expedited Data Received} The network transport returned partial
data to its client and this data was marked as expedited by the
remote system. The remaining data will be sent later. {TDI Event
Done} The TDI indication has completed successfully. {TDI Event
Pending} The TDI indication has entered the pending state. Checking
file system on %wZ.
ERROR_FT_WRITE_RECOVERY 705 (0x2C1)
ERROR_IMAGE_MACHINE_TYPE_MISMATCH 706 (0x2C2)
ERROR_RECEIVE_PARTIAL 707 (0x2C3)
ERROR_RECEIVE_EXPEDITED 708 (0x2C4)
ERROR_RECEIVE_PARTIAL_EXPEDITED 709 (0x2C5)
ERROR_EVENT_DONE 710 (0x2C6) ERROR_EVENT_PENDING 711 (0x2C7)
ERROR_CHECKING_FILE_SYSTEM 712 (0x2C8) ERROR_FATAL_APP_EXIT 713
(0x2C9) ERROR_PREDEFINED_HANDLE 714 (0x2CA)
{Fatal Application Exit} %hs.
The specified registry key is referenced by a predefined
handle.
28
ERROR_WAS_UNLOCKED 715 (0x2CB)
{Page Unlocked} The page protection of a locked page was changed
to ‘No Access’ and the page was unlocked from memory and from the
process. %hs
ERROR_SERVICE_NOTIFICATION 716 (0x2CC) ERROR_WAS_LOCKED 717
(0x2CD) ERROR_LOG_HARD_ERROR 718 (0x2CE) ERROR_ALREADY_WIN32 719
(0x2CF) ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE 720 (0x2D0)
{Page Locked} One of the pages to lock was already locked.
Application popup: %1 : %2
ERROR_ALREADY_WIN32
{Machine Type Mismatch} The image file %hs is valid, but is for
a machine type other than the current machine. A yield execution
was performed and no thread was available to run. The resumable
flag to a timer API was ignored. The arbiter has deferred
arbitration of these resources to its parent. The inserted CardBus
device cannot be started because of a configuration error on «%hs».
The CPUs in this multiprocessor system are not all the same
revision level. To use all processors the operating system
restricts itself to the features of the least capable processor in
the system. Should problems occur with this system, contact the CPU
manufacturer to see if this mix of processors is supported. The
system was put into hibernation.
ERROR_NO_YIELD_PERFORMED 721 (0x2D1) ERROR_TIMER_RESUME_IGNORED
722 (0x2D2) ERROR_ARBITRATION_UNHANDLED 723 (0x2D3)
ERROR_CARDBUS_NOT_SUPPORTED 724 (0x2D4)
ERROR_MP_PROCESSOR_MISMATCH 725 (0x2D5)
ERROR_HIBERNATED 726 (0x2D6) ERROR_RESUME_HIBERNATION 727
(0x2D7) ERROR_FIRMWARE_UPDATED 728 (0x2D8)
The system was resumed from hibernation. Windows has detected
that the system firmware (BIOS) was updated [previous firmware date
= %2, current firmware date %3]. A device driver is leaking locked
I/O pages causing system degradation. The system has automatically
enabled tracking code in order to try
ERROR_DRIVERS_LEAKING_LOCKED_PAGES 729 (0x2D9)
29
and catch the culprit. ERROR_WAKE_SYSTEM 730 (0x2DA)
ERROR_WAIT_1 731 (0x2DB) ERROR_WAIT_2 732 (0x2DC) ERROR_WAIT_3 733
(0x2DD) ERROR_WAIT_63 734 (0x2DE) ERROR_ABANDONED_WAIT_0 735
(0x2DF) ERROR_ABANDONED_WAIT_63 736 (0x2E0) ERROR_USER_APC 737
(0x2E1) ERROR_KERNEL_APC 738 (0x2E2) ERROR_ALERTED 739 (0x2E3)
ERROR_ELEVATION_REQUIRED 740 (0x2E4) ERROR_REPARSE 741 (0x2E5) The
system has awoken.
ERROR_WAIT_1
ERROR_WAIT_2
ERROR_WAIT_3
ERROR_WAIT_63
ERROR_ABANDONED_WAIT_0
ERROR_ABANDONED_WAIT_63
ERROR_USER_APC
ERROR_KERNEL_APC
ERROR_ALERTED
The requested operation requires elevation. A reparse should be
performed by the Object Manager since the name of the file resulted
in a symbolic link. An open/create operation completed while an
oplock break is underway. A new volume has been mounted by a file
system. This success level status indicates that the transaction
state already exists for the registry sub-tree, but that a
transaction commit was previously aborted. The commit has now been
completed. This indicates that a notify change request has been
completed due to closing the handle which made the notify change
request. {Connect Failure on Primary Transport} An attempt was made
to
ERROR_OPLOCK_BREAK_IN_PROGRESS 742 (0x2E6) ERROR_VOLUME_MOUNTED
743 (0x2E7) ERROR_RXACT_COMMITTED 744 (0x2E8)
ERROR_NOTIFY_CLEANUP 745 (0x2E9)
ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED 746 (0x2EA)
30
connect to the remote server %hs on the primary transport, but
the connection failed. The computer WAS able to connect on a
secondary transport. ERROR_PAGE_FAULT_TRANSITION 747 (0x2EB)
ERROR_PAGE_FAULT_DEMAND_ZERO 748 (0x2EC)
ERROR_PAGE_FAULT_COPY_ON_WRITE 749 (0x2ED)
ERROR_PAGE_FAULT_GUARD_PAGE 750 (0x2EE)
ERROR_PAGE_FAULT_PAGING_FILE 751 (0x2EF) ERROR_CACHE_PAGE_LOCKED
752 (0x2F0) ERROR_CRASH_DUMP 753 (0x2F1) ERROR_BUFFER_ALL_ZEROS 754
(0x2F2) ERROR_REPARSE_OBJECT 755 (0x2F3) Page fault was a
transition fault.
Page fault was a demand zero fault.
Page fault was a demand zero fault.
Page fault was a demand zero fault.
Page fault was satisfied by reading from a secondary storage
device. Cached page was locked during operation. Crash dump exists
in paging file.
Specified buffer contains all zeros.
A reparse should be performed by the Object Manager since the
name of the file resulted in a symbolic link. The device has
succeeded a querystop and its resource requirements have changed.
The translator has translated these resources into the global space
and no further translations should be performed. A process being
terminated has no threads to terminate. The specified process is
not part of a job. The specified process is part of a job.
ERROR_RESOURCE_REQUIREMENTS_CHANGED 756 (0x2F4)
ERROR_TRANSLATION_COMPLETE 757 (0x2F5)
ERROR_NOTHING_TO_TERMINATE 758 (0x2F6) ERROR_PROCESS_NOT_IN_JOB
759 (0x2F7) ERROR_PROCESS_IN_JOB 760 (0x2F8)
ERROR_VOLSNAP_HIBERNATE_READY 761 (0x2F9)
ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY 762 (0x2FA)
{Volume Shadow Copy Service} The system is now ready for
hibernation. A file system or file system filter driver has
successfully completed an FsFilter operation.
31
ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED 763 (0x2FB)
ERROR_INTERRUPT_STILL_CONNECTED 764 (0x2FC) ERROR_WAIT_FOR_OPLOCK
765 (0x2FD) ERROR_DBG_EXCEPTION_HANDLED 766 (0x2FE)
ERROR_DBG_CONTINUE 767 (0x2FF) ERROR_CALLBACK_POP_STACK 768
(0x300)
The specified interrupt vector was already connected. The
specified interrupt vector is still connected. An operation is
blocked waiting for an oplock. Debugger handled exception.
Debugger continued.
An exception occurred in a user mode callback and the kernel
callback frame should be removed. Compression is disabled for this
volume. The data provider cannot fetch backwards through a result
set. The data provider cannot scroll backwards through a result
set. The data provider requires that previously fetched data is
released before asking for more data. The data provider was not
able to interpret the flags set for a column binding in an
accessor. One or more errors occurred while processing the request.
The implementation is not capable of performing the request. The
client of a component requested an operation which is not valid
given the state of the component instance. A version number could
not be parsed. The iterator’s start position is invalid.
ERROR_COMPRESSION_DISABLED 769 (0x301) ERROR_CANTFETCHBACKWARDS
770 (0x302) ERROR_CANTSCROLLBACKWARDS 771 (0x303)
ERROR_ROWSNOTRELEASED 772 (0x304)
ERROR_BAD_ACCESSOR_FLAGS 773 (0x305)
ERROR_ERRORS_ENCOUNTERED 774 (0x306) ERROR_NOT_CAPABLE 775
(0x307) ERROR_REQUEST_OUT_OF_SEQUENCE 776 (0x308)
ERROR_VERSION_PARSE_ERROR 777 (0x309) ERROR_BADSTARTPOSITION 778
(0x30A) ERROR_MEMORY_HARDWARE 779 (0x30B)
ERROR_DISK_REPAIR_DISABLED 780 (0x30C)
ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
The hardware has reported an uncorrectable memory error. The
attempted operation required self healing to be enabled. The
Desktop heap encountered an
32
781 (0x30D)
error while allocating session memory. There is more information
in the system event log. The system power state is transitioning
from %2 to %3. The system power state is transitioning from %2 to
%3 but could enter %4. A thread is getting dispatched with MCA
EXCEPTION because of MCA. Access to %1 is monitored by policy rule
%2. Access to %1 has been restricted by your Administrator by
policy rule %2. A valid hibernation file has been invalidated and
should be abandoned. {Delayed Write Failed} Windows was unable to
save all the data for the file %hs; the data has been lost. This
error may be caused by network connectivity issues. Please try to
save this file elsewhere. {Delayed Write Failed} Windows was unable
to save all the data for the file %hs; the data has been lost. This
error was returned by the server on which the file exists. Please
try to save this file elsewhere. {Delayed Write Failed} Windows was
unable to save all the data for the file %hs; the data has been
lost. This error may be caused if the device has been removed or
the media is writeprotected. The resources required for this device
conflict with the MCFG table. The volume repair could not be
performed while it is online. Please schedule to take the volume
offline so that it can be repaired. The volume repair was not
successful. One of the volume corruption logs is full. Further
corruptions that may be detected won’t be logged.
ERROR_SYSTEM_POWERSTATE_TRANSITION 782 (0x30E)
ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION 783 (0x30F)
ERROR_MCA_EXCEPTION 784 (0x310) ERROR_ACCESS_AUDIT_BY_POLICY 785
(0x311) ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY 786 (0x312)
ERROR_ABANDON_HIBERFILE 787 (0x313)
ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED 788 (0x314)
ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR 789 (0x315)
ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR 790 (0x316)
ERROR_BAD_MCFG_TABLE 791 (0x317) ERROR_DISK_REPAIR_REDIRECTED
792 (0x318)
ERROR_DISK_REPAIR_UNSUCCESSFUL 793 (0x319)
ERROR_CORRUPT_LOG_OVERFULL 794 (0x31A)
33
ERROR_CORRUPT_LOG_CORRUPTED 795 (0x31B)
One of the volume corruption logs is internally corrupted and
needs to be recreated. The volume may contain undetected
corruptions and must be scanned. One of the volume corruption logs
is unavailable for being operated on. One of the volume corruption
logs was deleted while still having corruption records in them. The
volume contains detected corruptions and must be scanned. One of
the volume corruption logs was cleared by chkdsk and no longer
contains real corruptions. Orphaned files exist on the volume but
could not be recovered because no more new names could be created
in the recovery directory. Files must be moved from the recovery
directory. The oplock that was associated with this handle is now
associated with a different handle. An oplock of the requested
level cannot be granted. An oplock of a lower level may be
available. The operation did not complete successfully because it
would cause an oplock to be broken. The caller has requested that
existing oplocks not be broken. The handle with which this oplock
was associated has been closed. The oplock is now broken. The
specified access control entry (ACE) does not contain a condition.
The specified access control entry (ACE) contains an invalid
condition. Access to the specified file handle has been revoked.
Access to the extended attribute was denied. The I/O operation has
been aborted because of either a thread exit or an application
request.
ERROR_CORRUPT_LOG_UNAVAILABLE 796 (0x31C)
ERROR_CORRUPT_LOG_DELETED_FULL 797 (0x31D)
ERROR_CORRUPT_LOG_CLEARED 798 (0x31E)
ERROR_ORPHAN_NAME_EXHAUSTED 799 (0x31F)
ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE 800 (0x320)
ERROR_CANNOT_GRANT_REQUESTED_OPLOCK 801 (0x321)
ERROR_CANNOT_BREAK_OPLOCK 802 (0x322)
ERROR_OPLOCK_HANDLE_CLOSED 803 (0x323)
ERROR_NO_ACE_CONDITION 804 (0x324) ERROR_INVALID_ACE_CONDITION
805 (0x325) ERROR_FILE_HANDLE_REVOKED 806 (0x326)
ERROR_EA_ACCESS_DENIED 994 (0x3E2) ERROR_OPERATION_ABORTED 995
(0x3E3)
34
ERROR_IO_INCOMPLETE 996 (0x3E4) ERROR_IO_PENDING 997 (0x3E5)
ERROR_NOACCESS 998 (0x3E6) ERROR_SWAPERROR 999 (0x3E7)
Overlapped I/O event is not in a signaled state. Overlapped I/O
operation is in progress. Invalid access to memory location.
Error performing inpage operation.
Constant/value ERROR_STACK_OVERFLOW 1001 (0x3E9)
ERROR_INVALID_MESSAGE 1002 (0x3EA) ERROR_CAN_NOT_COMPLETE 1003
(0x3EB) ERROR_INVALID_FLAGS 1004 (0x3EC) ERROR_UNRECOGNIZED_VOLUME
1005 (0x3ED)
Description Recursion too deep; the stack overflowed.
The window cannot act on the sent message.
Cannot complete this function.
Invalid flags.
The volume does not contain a recognized file system. Please
make sure that all required file system drivers are loaded and that
the volume is not corrupted. The volume for a file has been
externally altered so that the opened file is no longer valid. The
requested operation cannot be performed in fullscreen mode. An
attempt was made to reference a token that does not exist. The
configuration registry database is corrupt.
ERROR_FILE_INVALID 1006 (0x3EE) ERROR_FULLSCREEN_MODE 1007
(0x3EF) ERROR_NO_TOKEN 1008 (0x3F0) ERROR_BADDB 1009 (0x3F1)
ERROR_BADKEY 1010 (0x3F2) ERROR_CANTOPEN 1011 (0x3F3)
ERROR_CANTREAD 1012 (0x3F4) ERROR_CANTWRITE 1013 (0x3F5)
ERROR_REGISTRY_RECOVERED 1014 (0x3F6)
The configuration registry key is invalid.
The configuration registry key could not be opened.
The configuration registry key could not be read.
The configuration registry key could not be written.
One of the files in the registry database had to be recovered by
use of a log or alternate copy. The recovery was successful.
35
ERROR_REGISTRY_CORRUPT 1015 (0x3F7)
The registry is corrupted. The structure of one of the files
containing registry data is corrupted, or the system’s memory image
of the file is corrupted, or the file could not be recovered
because the alternate copy or log was absent or corrupted. An I/O
operation initiated by the registry failed unrecoverably. The
registry could not read in, or write out, or flush, one of the
files that contain the system’s image of the registry. The system
has attempted to load or restore a file into the registry, but the
specified file is not in a registry file format. Illegal operation
attempted on a registry key that has been marked for deletion.
System could not allocate the required space in a registry log.
Cannot create a symbolic link in a registry key that already has
subkeys or values. Cannot create a stable subkey under a volatile
parent key. A notify change request is being completed and the
information is not being returned in the caller’s buffer. The
caller now needs to enumerate the files to find the changes. A stop
control has been sent to a service that other running services are
dependent on. The requested control is not valid for this
service.
ERROR_REGISTRY_IO_FAILED 1016 (0x3F8)
ERROR_NOT_REGISTRY_FILE 1017 (0x3F9)
ERROR_KEY_DELETED 1018 (0x3FA) ERROR_NO_LOG_SPACE 1019 (0x3FB)
ERROR_KEY_HAS_CHILDREN 1020 (0x3FC) ERROR_CHILD_MUST_BE_VOLATILE
1021 (0x3FD) ERROR_NOTIFY_ENUM_DIR 1022 (0x3FE)
ERROR_DEPENDENT_SERVICES_RUNNING 1051 (0x41B)
ERROR_INVALID_SERVICE_CONTROL 1052 (0x41C)
ERROR_SERVICE_REQUEST_TIMEOUT 1053 (0x41D) ERROR_SERVICE_NO_THREAD
1054 (0x41E) ERROR_SERVICE_DATABASE_LOCKED 1055 (0x41F)
ERROR_SERVICE_ALREADY_RUNNING 1056 (0x420)
ERROR_INVALID_SERVICE_ACCOUNT 1057 (0x421) ERROR_SERVICE_DISABLED
1058 (0x422)
The service did not respond to the start or control request in a
timely fashion. A thread could not be created for the service.
The service database is locked.
An instance of the service is already running.
The account name is invalid or does not exist, or the password
is invalid for the account name specified. The service cannot be
started, either because it is disabled or because it has no enabled
devices associated with it. Circular service dependency was
specified.
ERROR_CIRCULAR_DEPENDENCY 1059 (0x423)
36
ERROR_SERVICE_DOES_NOT_EXIST 1060 (0x424)
ERROR_SERVICE_CANNOT_ACCEPT_CTRL 1061 (0x425)
ERROR_SERVICE_NOT_ACTIVE 1062 (0x426)
ERROR_FAILED_SERVICE_CONTROLLER_CONNECT 1063 (0x427)
ERROR_EXCEPTION_IN_SERVICE 1064 (0x428)
ERROR_DATABASE_DOES_NOT_EXIST 1065 (0x429)
ERROR_SERVICE_SPECIFIC_ERROR 1066 (0x42A) ERROR_PROCESS_ABORTED
1067 (0x42B) ERROR_SERVICE_DEPENDENCY_FAIL 1068 (0x42C)
ERROR_SERVICE_LOGON_FAILED 1069 (0x42D) ERROR_SERVICE_START_HANG
1070 (0x42E) ERROR_INVALID_SERVICE_LOCK 1071 (0x42F)
ERROR_SERVICE_MARKED_FOR_DELETE 1072 (0x430) ERROR_SERVICE_EXISTS
1073 (0x431) ERROR_ALREADY_RUNNING_LKG 1074 (0x432)
ERROR_SERVICE_DEPENDENCY_DELETED 1075 (0x433)
ERROR_BOOT_ALREADY_ACCEPTED 1076 (0x434)
ERROR_SERVICE_NEVER_STARTED 1077 (0x435)
ERROR_DUPLICATE_SERVICE_NAME 1078 (0x436)
ERROR_DIFFERENT_SERVICE_ACCOUNT 1079 (0x437)
The specified service does not exist as an installed service.
The service cannot accept control messages at this time. The
service has not been started.
The service process could not connect to the service controller.
An exception occurred in the service when handling the control
request. The database specified does not exist.
The service has returned a service-specific error code.
The process terminated unexpectedly.
The dependency service or group failed to start.
The service did not start due to a logon failure.
After starting, the service hung in a start-pending state.
The specified service database lock is invalid.
The specified service has been marked for deletion.
The specified service already exists.
The system is currently running with the last-knowngood
configuration. The dependency service does not exist or has been
marked for deletion. The current boot has already been accepted for
use as the last-known-good control set. No attempts to start the
service have been made since the last boot. The name is already in
use as either a service name or a service display name. The account
specified for this service is different from the account specified
for other services running in the
37
same process. ERROR_CANNOT_DETECT_DRIVER_FAILURE 1080 (0x438)
ERROR_CANNOT_DETECT_PROCESS_ABORT 1081 (0x439) Failure actions can
only be set for Win32 services, not for drivers. This service runs
in the same process as the service control manager. Therefore, the
service control manager cannot take action if this service’s
process terminates unexpectedly. No recovery program has been
configured for this service. The executable program that this
service is configured to run in does not implement the service.
This service cannot be started in Safe Mode.
ERROR_NO_RECOVERY_PROGRAM 1082 (0x43A) ERROR_SERVICE_NOT_IN_EXE
1083 (0x43B) ERROR_NOT_SAFEBOOT_SERVICE 1084 (0x43C)
ERROR_END_OF_MEDIA 1100 (0x44C) ERROR_FILEMARK_DETECTED 1101
(0x44D) ERROR_BEGINNING_OF_MEDIA 1102 (0x44E)
ERROR_SETMARK_DETECTED 1103 (0x44F) ERROR_NO_DATA_DETECTED 1104
(0x450) ERROR_PARTITION_FAILURE 1105 (0x451)
ERROR_INVALID_BLOCK_LENGTH 1106 (0x452)
ERROR_DEVICE_NOT_PARTITIONED 1107 (0x453)
ERROR_UNABLE_TO_LOCK_MEDIA 1108 (0x454)
ERROR_UNABLE_TO_UNLOAD_MEDIA 1109 (0x455) ERROR_MEDIA_CHANGED 1110
(0x456) ERROR_BUS_RESET 1111 (0x457) ERROR_NO_MEDIA_IN_DRIVE 1112
(0x458) ERROR_NO_UNICODE_TRANSLATION
The physical end of the tape has been reached.
A tape access reached a filemark.
The beginning of the tape or a partition was encountered. A tape
access reached the end of a set of files.
No more data is on the tape.
Tape could not be partitioned.
When accessing a new tape of a multivolume partition, the
current block size is incorrect. Tape partition information could
not be found when loading a tape. Unable to lock the media eject
mechanism.
Unable to unload the media.
The media in the drive may have changed.
The I/O bus was reset.
No media in drive.
No mapping for the Unicode character exists in the
38
1113 (0x459) ERROR_DLL_INIT_FAILED 1114 (0x45A)
ERROR_SHUTDOWN_IN_PROGRESS 1115 (0x45B)
ERROR_NO_SHUTDOWN_IN_PROGRESS 1116 (0x45C) ERROR_IO_DEVICE 1117
(0x45D) ERROR_SERIAL_NO_DEVICE 1118 (0x45E) ERROR_IRQ_BUSY 1119
(0x45F)
target multi-byte code page. A dynamic link library (DLL)
initialization routine failed.
A system shutdown is in progress.
Unable to abort the system shutdown because no shutdown was in
progress. The request could not be performed because of an I/O
device error. No serial device was successfully initialized. The
serial driver will unload. Unable to open a device that was sharing
an interrupt request (IRQ) with other devices. At least one other
device that uses that IRQ was already opened. A serial I/O
operation was completed by another write to the serial port. The
IOCTL_SERIAL_XOFF_COUNTER reached zero.) A serial I/O operation
completed because the timeout period expired. The
IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) No ID address mark
was found on the floppy disk.
ERROR_MORE_WRITES 1120 (0x460)
ERROR_COUNTER_TIMEOUT 1121 (0x461)
ERROR_FLOPPY_ID_MARK_NOT_FOUND 1122 (0x462)
ERROR_FLOPPY_WRONG_CYLINDER 1123 (0x463) ERROR_FLOPPY_UNKNOWN_ERROR
1124 (0x464) ERROR_FLOPPY_BAD_REGISTERS 1125 (0x465)
ERROR_DISK_RECALIBRATE_FAILED 1126 (0x466)
ERROR_DISK_OPERATION_FAILED 1127 (0x467) ERROR_DISK_RESET_FAILED
1128 (0x468) ERROR_EOM_OVERFLOW 1129 (0x469)
ERROR_NOT_ENOUGH_SERVER_MEMORY 1130 (0x46A) ERROR_POSSIBLE_DEADLOCK
1131 (0x46B)
Mismatch between the floppy disk sector ID field and the floppy
disk controller track address. The floppy disk controller reported
an error that is not recognized by the floppy disk driver. The
floppy disk controller returned inconsistent results in its
registers. While accessing the hard disk, a recalibrate operation
failed, even after retries. While accessing the hard disk, a disk
operation failed even after retries. While accessing the hard disk,
a disk controller reset was needed, but even that failed. Physical
end of tape encountered.
Not enough server storage is available to process this command.
A potential deadlock condition has been detected.
39
ERROR_MAPPED_ALIGNMENT 1132 (0x46C) ERROR_SET_POWER_STATE_VETOED
1140 (0x474) ERROR_SET_POWER_STATE_FAILED 1141 (0x475)
ERROR_TOO_MANY_LINKS 1142 (0x476) ERROR_OLD_WIN_VERSION 1150
(0x47E) ERROR_APP_WRONG_OS 1151 (0x47F) ERROR_SINGLE_INSTANCE_APP
1152 (0x480) ERROR_RMODE_APP 1153 (0x481) ERROR_INVALID_DLL 1154
(0x482) ERROR_NO_ASSOCIATION 1155 (0x483) ERROR_DDE_FAIL 1156
(0x484) ERROR_DLL_NOT_FOUND 1157 (0x485) ERROR_NO_MORE_USER_HANDLES
1158 (0x486) ERROR_MESSAGE_SYNC_ONLY 1159 (0x487)
ERROR_SOURCE_ELEMENT_EMPTY 1160 (0x488)
ERROR_DESTINATION_ELEMENT_FULL 1161 (0x489)
ERROR_ILLEGAL_ELEMENT_ADDRESS 1162 (0x48A)
ERROR_MAGAZINE_NOT_PRESENT 1163 (0x48B)
ERROR_DEVICE_REINITIALIZATION_NEEDED 1164 (0x48C)
ERROR_DEVICE_REQUIRES_CLEANING 1165 (0x48D)
The base address or the file offset specified does not have the
proper alignment. An attempt to change the system power state was
vetoed by another application or driver. The system BIOS failed an
attempt to change the system power state. An attempt was made to
create more links on a file than the file system supports. The
specified program requires a newer version of Windows. The
specified program is not a Windows or MS-DOS program. Cannot start
more than one instance of the specified program. The specified
program was written for an earlier version of Windows. One of the
library files needed to run this application is damaged. No
application is associated with the specified file for this
operation. An error occurred in sending the command to the
application. One of the library files needed to run this
application cannot be found. The current process has used all of
its system allowance of handles for Window Manager objects. The
message can be used only with synchronous operations. The indicated
source element has no media.
The indicated destination element already contains media. The
indicated element does not exist.
The indicated element is part of a magazine that is not present.
The indicated device requires reinitialization due to hardware
errors. The device has indicated that cleaning is required before
further operations are attempted.
40
ERROR_DEVICE_DOOR_OPEN 1166 (0x48E) ERROR_DEVICE_NOT_CONNECTED
1167 (0x48F) ERROR_NOT_FOUND 1168 (0x490) ERROR_NO_MATCH 1169
(0x491) ERROR_SET_NOT_FOUND 1170 (0x492) ERROR_POINT_NOT_FOUND 1171
(0x493) ERROR_NO_TRACKING_SERVICE 1172 (0x494) ERROR_NO_VOLUME_ID
1173 (0x495) ERROR_UNABLE_TO_REMOVE_REPLACED 1175 (0x497)
ERROR_UNABLE_TO_MOVE_REPLACEMENT 1176 (0x498)
The device has indicated that its door is open.
The device is not connected.
Element not found.
There was no match for the specified key in the index.
The property set specified does not exist on the object.
The point passed to GetMouseMovePoints is not in the buffer. The
tracking (workstation) service is not running.
The Volume ID could not be found.
Unable to remove the file to be replaced.
Unable to move the replacement file to the file to be replaced.
The file to be replaced has retained its original name. Unable to
move the replacement file to the file to be replaced. The file to
be replaced has been renamed using the backup name. The volume
change journal is being deleted.
ERROR_UNABLE_TO_MOVE_REPLACEMENT_2 1177 (0x499)
ERROR_JOURNAL_DELETE_IN_PROGRESS 1178 (0x49A)
ERROR_JOURNAL_NOT_ACTIVE 1179 (0x49B) ERROR_POTENTIAL_FILE_FOUND
1180 (0x49C) ERROR_JOURNAL_ENTRY_DELETED 1181 (0x49D)
ERROR_SHUTDOWN_IS_SCHEDULED 1190 (0x4A6)
ERROR_SHUTDOWN_USERS_LOGGED_ON 1191 (0x4A7) ERROR_BAD_DEVICE 1200
(0x4B0) ERROR_CONNECTION_UNAVAIL 1201 (0x4B1)
The volume change journal is not active.
A file was found, but it may not be the correct file.
The journal entry has been deleted from the journal.
A system shutdown has already been scheduled.
The system shutdown cannot be initiated because there are other
users logged on to the computer. The specified device name is
invalid.
The device is not currently connected but it is a remembered
connection.
41
ERROR_DEVICE_ALREADY_REMEMBERED 1202 (0x4B2)
ERROR_NO_NET_OR_BAD_PATH 1203 (0x4B3)
The local device name has a remembered connection to another
network resource. The network path was either typed incorrectly,
does not exist, or the network provider is not currently available.
Please try retyping the path or contact your network administrator.
The specified network provider name is invalid.
ERROR_BAD_PROVIDER 1204 (0x4B4) ERROR_CANNOT_OPEN_PROFILE 1205
(0x4B5) ERROR_BAD_PROFILE 1206 (0x4B6) ERROR_NOT_CONTAINER 1207
(0x4B7) ERROR_EXTENDED_ERROR 1208 (0x4B8) ERROR_INVALID_GROUPNAME
1209 (0x4B9) ERROR_INVALID_COMPUTERNAME 1210 (0x4BA)
ERROR_INVALID_EVENTNAME 1211 (0x4BB) ERROR_INVALID_DOMAINNAME 1212
(0x4BC) ERROR_INVALID_SERVICENAME 1213 (0x4BD)
ERROR_INVALID_NETNAME 1214 (0x4BE) ERROR_INVALID_SHARENAME 1215
(0x4BF) ERROR_INVALID_PASSWORDNAME 1216 (0x4C0)
ERROR_INVALID_MESSAGENAME 1217 (0x4C1) ERROR_INVALID_MESSAGEDEST
1218 (0x4C2) ERROR_SESSION_CREDENTIAL_CONFLICT 1219 (0x4C3)
Unable to open the network connection profile.
The network connection profile is corrupted.
Cannot enumerate a noncontainer.
An extended error has occurred.
The format of the specified group name is invalid.
The format of the specified computer name is invalid.
The format of the specified event name is invalid.
The format of the specified domain name is invalid.
The format of the specified service name is invalid.
The format of the specified network name is invalid.
The format of the specified share name is invalid.
The format of the specified password is invalid.
The format of the specified message name is invalid.
The format of the specified message destination is invalid.
Multiple connections to a server or shared resource by the same
user, using more than one user name, are not allowed. Disconnect
all previous connections to the server or shared resource and try
again. An attempt was made to establish a session to a
ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
42
1220 (0x4C4)
network server, but there are already too many sessions
established to that server. The workgroup or domain name is already
in use by another computer on the network. The network is not
present or not started.
ERROR_DUP_DOMAINNAME 1221 (0x4C5) ERROR_NO_NETWORK 1222 (0x4C6)
ERROR_CANCELLED 1223 (0x4C7) ERROR_USER_MAPPED_FILE 1224 (0x4C8)
ERROR_CONNECTION_REFUSED 1225 (0x4C9) ERROR_GRACEFUL_DISCONNECT
1226 (0x4CA) ERROR_ADDRESS_ALREADY_ASSOCIATED 1227 (0x4CB)
ERROR_ADDRESS_NOT_ASSOCIATED 1228 (0x4CC) ERROR_CONNECTION_INVALID
1229 (0x4CD) ERROR_CONNECTION_ACTIVE 1230 (0x4CE)
ERROR_NETWORK_UNREACHABLE 1231 (0x4CF)
The operation was canceled by the user.
The requested operation cannot be performed on a file with a
user-mapped section open. The remote computer refused the network
connection.
The network connection was gracefully closed.
The network transport endpoint already has an address associated
with it. An address has not yet been associated with the network
endpoint. An operation was attempted on a nonexistent network
connection. An invalid operation was attempted on an active network
connection. The network location cannot be reached. For information
about network troubleshooting, see Windows Help. The network
location cannot be reached. For information about network
troubleshooting, see Windows Help. The network location cannot be
reached. For information about network troubleshooting, see Windows
Help. No service is operating at the destination network endpoint
on the remote system. The request was aborted.
ERROR_HOST_UNREACHABLE 1232 (0x4D0)
ERROR_PROTOCOL_UNREACHABLE 1233 (0x4D1)
ERROR_PORT_UNREACHABLE 1234 (0x4D2) ERROR_REQUEST_ABORTED 1235
(0x4D3) ERROR_CONNECTION_ABORTED 1236 (0x4D4) ERROR_RETRY 1237
(0x4D5) ERROR_CONNECTION_COUNT_LIMIT 1238 (0x4D6)
The network connection was aborted by the local system. The
operation could not be completed. A retry should be performed. A
connection to the server could not be made because the limit on the
number of concurrent connections for
43
this account has been reached. ERROR_LOGIN_TIME_RESTRICTION 1239
(0x4D7) ERROR_LOGIN_WKSTA_RESTRICTION 1240 (0x4D8)
ERROR_INCORRECT_ADDRESS 1241 (0x4D9) ERROR_ALREADY_REGISTERED 1242
(0x4DA) ERROR_SERVICE_NOT_FOUND 1243 (0x4DB)
ERROR_NOT_AUTHENTICATED 1244 (0x4DC) ERROR_NOT_LOGGED_ON 1245
(0x4DD) Attempting to log in during an unauthorized time of day for
this account. The account is not authorized to log in from this
station. The network address could not be used for the operation
requested. The service is already registered.
The specified service does not exist.
The operation being requested was not performed because the user
has not been authenticated. The operation being requested was not
performed because the user has not logged on to the network. The
specified service does not exist. Continue with work in
progress.
ERROR_CONTINUE 1246 (0x4DE) ERROR_ALREADY_INITIALIZED 1247
(0x4DF)
An attempt was made to perform an initialization operation when
initialization has already been completed. No more local
devices.
ERROR_NO_MORE_DEVICES 1248 (0x4E0) ERROR_NO_SUCH_SITE 1249
(0x4E1) ERROR_DOMAIN_CONTROLLER_EXISTS 1250 (0x4E2)
ERROR_ONLY_IF_CONNECTED 1251 (0x4E3) ERROR_OVERRIDE_NOCHANGES 1252
(0x4E4) ERROR_BAD_USER_PROFILE 1253 (0x4E5)
ERROR_NOT_SUPPORTED_ON_SBS 1254 (0x4E6)
ERROR_SERVER_SHUTDOWN_IN_PROGRESS 1255 (0x4E7) ERROR_HOST_DOWN 1256
(0x4E8) ERROR_NON_ACCOUNT_SID
The specified site does not exist.
A domain controller with the specified name already exists. This
operation is supported only when you are connected to the server.
The group policy framework should call the extension even if there
are no changes. The specified user does not have a valid
profile.
This operation is not supported on a computer running Windows
Server 2003 for Small Business Server. The server machine is
shutting down.
The remote system is not available. For information about
network troubleshooting, see Windows Help. The security identifier
provided is not from an account
44
1257 (0x4E9) ERROR_NON_DOMAIN_SID 1258 (0x4EA)
ERROR_APPHELP_BLOCK 1259 (0x4EB) ERROR_ACCESS_DISABLED_BY_POLICY
1260 (0x4EC) ERROR_REG_NAT_CONSUMPTION 1261 (0x4ED)
domain. The security identifier provided does not have a domain
component. AppHelp dialog canceled thus preventing the application
from starting. This program is blocked by group policy. For more
information, contact your system administrator. A program attempt
to use an invalid register value. Normally caused by an
uninitialized register. This error is Itanium specific. The share
is currently offline or does not exist.
ERROR_CSCSHARE_OFFLINE 1262 (0x4EE) ERROR_PKINIT_FAILURE 1263
(0x4EF)
The Kerberos protocol encountered an error while validating the
KDC certificate during smartcard logon. There is more information
in the system event log. The Kerberos protocol encountered an error
while attempting to utilize the smartcard subsystem. The system
cannot contact a domain controller to service the authentication
request. Please try again later. The machine is locked and cannot
be shut down without the force option. An application-defined
callback gave invalid data when called. The group policy framework
should call the extension in the synchronous foreground policy
refresh. This driver has been blocked from loading.
ERROR_SMARTCARD_SUBSYSTEM_FAILURE 1264 (0x4F0)
ERROR_DOWNGRADE_DETECTED 1265 (0x4F1)
ERROR_MACHINE_LOCKED 1271 (0x4F7)
ERROR_CALLBACK_SUPPLIED_INVALID_DATA 1273 (0x4F9)
ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED 1274 (0x4FA)
ERROR_DRIVER_BLOCKED 1275 (0x4FB) ERROR_INVALID_IMPORT_OF_NON_DLL
1276 (0x4FC) ERROR_ACCESS_DISABLED_WEBBLADE 1277 (0x4FD)
ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER 1278 (0x4FE)
A dynamic link library (DLL) referenced a module that was
neither a DLL nor the process’s executable image. Windows cannot
open this program since it has been disabled. Windows cannot open
this program because the license enforcement system has been
tampered with or become corrupted. A transaction recover
failed.
ERROR_RECOVERY_FAILURE 1279 (0x4FF) ERROR_ALREADY_FIBER 1280
(0x500) ERROR_ALREADY_THREAD 1281 (0x501)
The current thread has already been converted to a fiber. The
current thread has already been converted from a fiber.
45
ERROR_STACK_BUFFER_OVERRUN 1282 (0x502)
The system detected an overrun of a stack-based buffer in this
application. This overrun could potentially allow a malicious user
to gain control of this application. Data present in one of the
parameters is more than the function can operate on. An attempt to
do an operation on a debug object failed because the object is in
the process of being deleted. An attempt to delay-load a .dll or
get a function address in a delay-loaded .dll failed. %1 is a
16-bit application. You do not have permissions to execute 16-bit
applications. Check your permissions with your system
administrator. Insufficient information exists to identify the
cause of failure. The parameter passed to a C runtime function is
incorrect. The operation occurred beyond the valid data length of
the file. The service start failed since one or more services in
the same process have an incompatible service SID type setting. A
service with restricted service SID type can only coexist in the
same process with other services with a restricted SID type. If the
service SID type for this service was just configured, the hosting
process must be restarted in order to start this service. On
Windows Server 2003 and Windows XP, an unrestricted service cannot
coexist in the same process with other services. The service with
the unrestricted service SID type must be moved to an owned process
in order to start this service. The process hosting the driver for
this device has been terminated. An operation attempted to exceed
an implementationdefined limit. Either the target process, or the
target thread’s containing process, is a protected process. The
service notification client is lagging too far behind the current
state of services in the machine. The requested file operation
failed because the storage quota was exceeded. To free up disk
space, move files to a different location or delete unnecessary
files. For more information, contact your system administrator. The
requested file operation failed because the storage
ERROR_PARAMETER_QUOTA_EXCEEDED 1283 (0x503)
ERROR_DEBUGGER_INACTIVE 1284 (0x504)
ERROR_DELAY_LOAD_FAILED 1285 (0x505) ERROR_VDM_DISALLOWED 1286
(0x506)
ERROR_UNIDENTIFIED_ERROR 1287 (0x507)
ERROR_INVALID_CRUNTIME_PARAMETER 1288 (0x508) ERROR_BEYOND_VDL 1289
(0x509) ERROR_INCOMPATIBLE_SERVICE_SID_TYPE 1290 (0x50A)
ERROR_DRIVER_PROCESS_TERMINATED 1291 (0x50B)
ERROR_IMPLEMENTATION_LIMIT 1292 (0x50C) ERROR_PROCESS_IS_PROTECTED
1293 (0x50D) ERROR_SERVICE_NOTIFY_CLIENT_LAGGING 1294 (0x50E)
ERROR_DISK_QUOTA_EXCEEDED 1295 (0x50F)
ERROR_CONTENT_BLOCKED
46
1296 (0x510)
policy blocks that type of file. For more information, contact
your system administrator. A privilege that the service requires to
function properly does not exist in the service account
configuration. You may use the Services Microsoft Management
Console (MMC) snap-in (services.msc) and the Local Security
Settings MMC snap-in (secpol.msc) to view the service configuration
and the account configuration. A thread involved in this operation
appears to be unresponsive. Indicates a particular Security ID may
not be assigned as the label of an object.
ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297 (0x511)
ERROR_APP_HANG 1298 (0x512) ERROR_INVALID_LABEL 1299 (0x513)
Constant/value ERROR_NOT_ALL_ASSIGNED 1300 (0x514)
ERROR_SOME_NOT_MAPPED 1301 (0x515) ERROR_NO_QUOTAS_FOR_ACCOUNT 1302
(0x516) ERROR_LOCAL_USER_SESSION_KEY 1303 (0x517)
ERROR_NULL_LM_PASSWORD 1304 (0x518)
Description Not all privileges or groups referenced are assigned
to the caller. Some mapping between account names and security IDs
was not done. No system quota limits are specifically set for this
account. No encryption key is available. A well-known encryption
key was returned. The password is too complex to be converted to a
LAN Manager password. The LAN Manager password returned is a NULL
string. The revision level is unknown.
ERROR_UNKNOWN_REVISION 1305 (0x519) ERROR_REVISION_MISMATCH 1306
(0x51A) ERROR_INVALID_OWNER 1307 (0x51B)
ERROR_INVALID_PRIMARY_GROUP 1308 (0x51C)
ERROR_NO_IMPERSONATION_TOKEN 1309 (0x51D)
Indicates two revision levels are incompatible.
This security ID may not be assigned as the owner of this
object. This security ID may not be assigned as the primary group
of an object. An attempt has been made to operate on an
impersonation token by a thread that is not currently impersonating
a client. The group may not be disabled.
ERROR_CANT_DISABLE_MANDATORY 1310 (0x51E) ERROR_NO_LOGON_SERVERS
1311 (0x51F)
There are currently no logon servers available to service the
logon request.
47
ERROR_NO_SUCH_LOGON_SESSION 1312 (0x520) ERROR_NO_SUCH_PRIVILEGE
1313 (0x521) ERROR_PRIVILEGE_NOT_HELD 1314 (0x522)
ERROR_INVALID_ACCOUNT_NAME 1315 (0x523) ERROR_USER_EXISTS 1316
(0x524) ERROR_NO_SUCH_USER 1317 (0x525) ERROR_GROUP_EXISTS 1318
(0x526) ERROR_NO_SUCH_GROUP 1319 (0x527) ERROR_MEMBER_IN_GROUP 1320
(0x528)
A specified logon session does not exist. It may already have
been terminated. A specified privilege does not exist.
A required privilege is not held by the client.
The name provided is not a properly formed account name. The
specified account already exists.
The specified account does not exist.
The specified group already exists.
The specified group does not exist.
Either the specified user account is already a member of the
specified group, or the specified group cannot be deleted because
it contains a member. The specified user account is not a member of
the specified group account. The last remaining administration
account cannot be disabled or deleted. Unable to update the
password. The value provided as the current password is incorrect.
Unable to update the password. The value provided for the new
password contains values that are not allowed in passwords. Unable
to update the password. The value provided for the new password
does not meet the length, complexity, or history requirements of
the domain. Incorrect user name or password.
ERROR_MEMBER_NOT_IN_GROUP 1321 (0x529) ERROR_LAST_ADMIN 1322
(0x52A) ERROR_WRONG_PASSWORD 1323 (0x52B) ERROR_ILL_FORMED_PASSWORD
1324 (0x52C)
ERROR_PASSWORD_RESTRICTION 1325 (0x52D)
ERROR_LOGON_FAILURE 1326 (0x52E) ERROR_ACCOUNT_RESTRICTION
1327