Did you know about Windows Error 1722 code problem or getting or facing with this error problem on your Windows PC again and again then check out this below the full post to find out that how we fix and solve this type of Error Code 1722 problem from our solutions for you!
This shows an error code message like,
Windows Error 1722 The RPC Server is Unavailable. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Error Code 1722
This error may occur if some MSI package is not removed correctly. This Windows Error 1722 The RPC Server is Unavailable problem is associated with either an Outdated Corrupt Windows installer or with Permission for Windows Script. A problem run as part of the setup did not finish as expected. It is also called as the InstallShield Error 1722 code problem. This Error Code 1722 indicates that the installation process has failed. The remnants of corrupted installation can sometimes prevent installation & the uninstallation of the software.
Causes of Windows Error 1722 Code Issue:
- The RPC server is unavailable
- Uninstalling applications issue
- Windows installer package PC error
- MSI registry Keys error
- Getting session names error
- Adobe flashes Player ActiveX
So, here are some top best guide and the tricky solutions for fixing and solving this type of Windows Error 1722 The RPC Server is Unavailable code problem from your PC permanently.
How to Fix & Solve Windows Error 1722 Code Issue
1. Unregister & Re-register the Windows installer on your PC –
- Go to the start menu
- Type this in the search menu
” service.msc “ - & press Enter there
- Now, double-click on the Windows installer
- Set the startup type of windows installer to manual
- Click start to start the service
- Then, click OK there
- Now, close the tab &
- Again click on the start menu
- Search or open ‘RUN‘ there
- A Pop-up will open there
- Type this below the following command there
” msiexec / unregister “ - & then click OK there
- Now, again open the RUN there
- Type this below the following command there
” msiexec / regserver “ - & then click OK there
- After running these commands, the operation is complete
- After finishing, close the tab
- & Restart your PC once
(Now, try your Windows Installer based program again)
By Unregister and Re-register the Windows installer can solve Windows Error 1722 the RPC Server is Unavailable problem quickly easily.
2. Fix by Run ‘regedit’ command in CMD (Command Prompt) –
- Go to the start menu
- Search or go to the ‘RUN‘ there
- Type “regedit” & press OK or Press Enter there
- A pop-up will open there
- In the registry editor there,
- Expand the various levels until you reach the windows key in the path above
- On the right side of the editor,
- Double click on the ‘LoadApplnit_DLLs value.’
- Change it to ‘0‘ & press OK there
- Exit the registry editor,
- Close all tabs &
- Restart your PC once
- That’s it, done
Fixing by running this command in the command prompt can quickly fix and solve this Windows Error 1722 getting session names code problem.
3. Reinstall the Systran product on your Windows PC –
- Go to the start menu
- Search or directly go to the ‘RUN.’
- Click on it and opens it there
- Type “regsvr32 wintrust.dll” & click on OK button there
‘ A message that says the .dll has been registered‘ will appear - Click on OK there
- Reinstall the Systran Product
- After completing, close the tab
- That’s it, done
By reinstalling the Systran product can quickly fix and solve this Windows Error 1722 there is a problem with this Windows Installer Package problem from your PC.
4. Run a Full Registry Cleaner of your Windows PC –
- First, Download and install the Ccleaner
- After downloading and installing process
- Now, opens it
- Click on the ‘Registry‘ option there
- Click on their “Scan for issues” there
- After Scanning, Select the ‘Fix Selected Issues‘ option there to fix it
- Now, restart your PC again
- That’s it, done
Wrong information stored in registry keys & accidentally deleting some registry keys can cause this Error Code 1722 problem. To stop it from appearing randomly, scan and run the registry cleaner can also solve this Windows Error 1722 printer problem.
Fixing by Cleaning the Registry from Ccleaner it can fix this Windows Error 1722 the RPC server is unavailable code issue from your PC.
5. Turn OFF or Disable Windows Firewall Settings on your PC –
- Go to the Start Menu
- Go to the Control Panel
- Click on Windows Firewall there
- Click on ‘Turn Windows Firewall on or off‘ feature there
- Tick on “Turn off Windows Firewall (not recommended)” there
- Now, Click on ‘OK‘ button there
- That’s it, Done
By turning off or disabling the windows firewall settings, it can fix this Windows Error 1722 getting session names code problem.
6. Run a Full Virus/Malware Scan of your Windows PC –
- Go to the start menu
- Search or go to the ‘Microsoft Security Essentials.’
- Click on it and opens it
- Tick the ‘Full‘ option to run a full scan of your PC
- Now, click on the “Scan Now” option there to scan your PC
- Now, wait for some minutes to scan it
- After completing, close the tab
- That’s it, done
By scanning and running your PC for malware/virus by the Microsoft Security Essentials can quickly fix and solve this Windows Error 1722 there is a problem with this Windows Installer Package code problem.
7. Do a Disk Cleanup on your Windows PC –
- Go to the start menu
- Search or go to the Disk Cleanup
- Opens it, after that
- Select the Disk you want to clean
- Now, tick & select the options which you want to clean it
- Wait for some minutes to clean
- After completing, close the tab
- That’s it, done
By running a disk cleanup of your full PC can quickly fix and solve this Windows Error 1722 printer code problem from your PC.
8. Run a CHKDSK Command in the CMD (Command Prompt) –
- Go to the start menu
- Search or go to the Cmd (Command Prompt)
- A Pop-up will open
- Type “chkdsk” command there in the Cmd
- Press Enter to start it
- That’s it, done
By running a chkdsk command in the command prompt, you will quickly fix this Windows Error 1722 flash problem.
These are the some best methods and the solutions to get rid out of this Windows Error 1722 The RPC Server is Unavailable code issue from your PC entirely. Hope it will fix and solve this Windows Error 1722 The RPC Server is Unavailable problem.
If you are facing this Windows Error 1722Â The RPC Server is Unavailable code problem or any error problem while fixing it or any error problem then comment down the issue below so that we can solve it too by our top best guide solutions.
A simple task in prior versions — open task manager, users, select all, send a message.
In 2012 — you can’t select more than one user. So if I want to send them a message, I’d have to do it one at a time.
I’ve tried msg command in elevated command prompt but it errors out — permissions setting which is unlocatable (not sure if that’s a word but I like it) in 2012.
Why is such a simple task so difficult. I would go on a further rant about 2012 but I’ll curb my tongue. Suffice to say — the enemy of good is better.
Thanks in advance
check
Best Answer
Since you were using the task manager, I’m assuming you were doing this on the server itself ? If you open a command prompt, type the ‘msg’ command to get the syntax.
I think it would be:
Msg * «Buy Me Lunch»
5 found this helpful
thumb_up
thumb_down
View Best Answer in replies below
Read these next…
Snap! — No-Password Logins, Solar Powered Water Filter, Glitch in the Matrix?
Spiceworks Originals
Your daily dose of tech news, in brief.
Welcome to the Snap!
Flashback: February 9, 1996: Introduction of the Bandai Pippin (Read more HERE.)
Bonus Flashback: February 9, 1990: Galileo Probe does a Venus Flyby (Read more HERE.)
You nee…
Roku TV being used as Wallboard Issues
Hardware
Helping someone out at their shop. They have 4 large Roku screens and 2 laptops with dual HDMI ports for video. They are viewing static website business dashboards and PowerPoint. At first all 4 screens connected to wireless, worked for a while but with a…
Charging for SSO
Security
We have SSO set up with around 5 or 6 solution providers via our M365. Not one of them charges for this, they just sent us the documentation.I identified another online service in use by one of our departments which would benefit from using SSO for staff …
Spark! Pro series — 9th February 2023
Spiceworks Originals
Today in History: America meets the Beatles on “The Ed Sullivan Show”
At approximately 8:12 p.m. Eastern time, Sunday, February 9, 1964, The Ed Sullivan Show returned from a commercial (for Anacin pain reliever), and there was Ed Sullivan standing …
Green Brand Rep Wrap-Up: January 2023
Spiceworks Originals
Source Opens a new window Opens a new windowHi, y’all — Chad here. A while back, we used to feature the top posts from our brand reps (aka “Green Gals/Guys/et. al.) in a weekly or monthly wrap-up post. I can’t specifically recall which, as that was ap…
Windows 10: Error 1722 getting session names
Discus and support Error 1722 getting session names in Windows 10 Installation and Upgrade to solve the problem; I’ve been trying to get the cmd prompt’s msg command. At my friends house we tried communicating between two computers on the same WiFi network. We…
Discussion in ‘Windows 10 Installation and Upgrade’ started by AlftraZign, Aug 4, 2019.
-
Error 1722 getting session names
I’ve been trying to get the cmd prompt’s msg command. At my friends house we tried communicating between two computers on the same WiFi network. We couldn’t get it to work so when I got home I tried between my laptop and desktop, one WiFi one Ethernet. All 4 are Windows Pro. I cannot, for the life of me, get it to work in any way. With desktop names, IPV4 addresses, even tried messaging the whole server.
When I type from my laptop to my desktop I get:
C:Usersitsme>msg * /server
ESKTOP-BLAHBLAHBLAH «hi»
Error 1722 getting session namesFrom my desktop to laptop I tried using the IPV4:
C:Usersitsme>msg * /server:192.168.blahblahblah «hi»
Error 1722 getting session names
When I try messaging the whole server:
C:Usersitsme>msg * «hi»
It only messages the machine I send it from.
I have gone to both’s registries and both have AllowRemoteRPC set to 1.I haven’t tried it between two different users yet, does that matter?My friends computers were also getting the same error message.
I don’s know what topic this should go under so I am sorry if it is incorrect.
-
Error 1722 getting session names
I’ve been trying to get the cmd prompt’s msg command. At my friends house we tried communicating between two computers on the same WiFi network. We couldn’t get it to work so when I got home I tried between my laptop and
desktop, one WiFi one Ethernet. All 4 are Windows Pro. I cannot, for the life of me, get it to work in any way. With desktop names, IPV4 addresses, even tried messaging the whole server.When I type from my laptop to my desktop I get:
C:Usersitsme>msg * /server
ESKTOP-BLAHBLAHBLAH «hi» Error 1722 getting session names
From my desktop to laptop I tried using the IPV4:
C:Usersitsme>msg * /server:192.168.blahblahblah «hi»
Error 1722 getting session names
When I try messaging the whole server:
C:Usersitsme>msg * «hi»
It only messages the machine I send it from.
I have gone to both’s registries and both have AllowRemoteRPC set to
1.I haven’t tried it between two different users yet, does that matter?My friends computers were also getting the same error message.
I don’s know what topic this should go under so I am sorry if it is incorrect.
-
1722 eror
Hi Ross,
The 1722 error message is a general installer error message that states that a system level failure has occurred.
To resolve your concern, we suggest that you follow the steps on: Error 1722 when reinstalling Flight Simulator X.
Let us know how it goes.
Regards.
-
Error 1722 getting session names
Fsx showing error code:1722 when reinstalling.
Hi,
The error 1722 appears when Windows fails to register fonts when reinstalling Flight Simulator X. We recommend that you follow the steps
here to resolve this particular error code.
Note: When using the command prompt in Step 7, make sure to run it as administrator.
To launch the command prompt as administrator, follow these steps:
- Click Start.
- Type Command Prompt.
- Right-click the result and choose Run as administrator.
Let us know if you’re able to reinstall Flight Simulator X after following these steps.
Error 1722 getting session names
-
Error 1722 getting session names — Similar Threads — Error 1722 getting
-
FSX devoted fan for 16 years! Reinstall Error 1722
in Windows 10 Gaming
FSX devoted fan for 16 years! Reinstall Error 1722: What frustration, 16 years with this a various uninstalls and reinstalls and without a hitch. Yesterday did a Windows 11 Reset to clean up the system. Went to reinstall FSX and at the very end of the installation get the 1722 error followed by 1603. Microsoft apparently has a… -
FSX devoted fan for 16 years! Reinstall Error 1722
in Windows 10 Software and Apps
FSX devoted fan for 16 years! Reinstall Error 1722: What frustration, 16 years with this a various uninstalls and reinstalls and without a hitch. Yesterday did a Windows 11 Reset to clean up the system. Went to reinstall FSX and at the very end of the installation get the 1722 error followed by 1603. Microsoft apparently has a… -
InstallShield Error code 1722 while installing MSI program
in Windows 10 News
InstallShield Error code 1722 while installing MSI program: [ATTACH]The MSI file format used by Windows Installer (MSI) is used specifically for installation […]This article InstallShield Error code 1722 while installing MSI program first appeared on TheWindowsClub.com.
read more…
-
Microsoft Flight Simulator X Error 1603 and Error 1722 on final installation.
in Windows 10 Gaming
Microsoft Flight Simulator X Error 1603 and Error 1722 on final installation.: Hello everyone, I’m currently having problems installing this game.At the end of the installation, it is registering the modules but a message pops up saying that an error has occurred «Error 1722» that there is a problem Window installer package that did not finish as…
-
Keep getting «Specified logon session does not exist» error
in Windows 10 Customization
Keep getting «Specified logon session does not exist» error: I keep on getting this error whenever I try to login to my University email in Outlook on my PC. I have also started getting this error when I try to login to OneDrive on this device. Please help![ATTACH]…
-
error 1722
in Windows 10 Gaming
error 1722: Bij het installeren van FSX flight simulator bij het eind van deze instalatie een fout melding error 1722.mijn kennis schiet tekort om dit optelossen.
groet aad
https://answers.microsoft.com/en-us/windows/forum/all/error-1722/7d49d56b-50fb-4c90-83bc-d45cf111b8bd
-
error 1722
in Windows 10 BSOD Crashes and Debugging
error 1722: error 1722. There is a problem with this windows installer packagehttps://answers.microsoft.com/en-us/windows/forum/all/error-1722/d8c30b78-e50c-43b6-9e6b-8c2c3f60bb59
-
Error codes 1722 & 1603
in Windows 10 Gaming
Error codes 1722 & 1603: Unable to restore FSX in windows 10 Have downloaded the license reset tool and run it from command prompt admin,but all i get is no such command. Would appreciate any guidance you could give.Yours
Mr Brian Plumley…
-
Trying to install ilok and keep getting several errors inc. 1006 1722
in Windows 10 Software and Apps
Trying to install ilok and keep getting several errors inc. 1006 1722: Hi all. Brand new here but looks like a group of intelligent people who know there stuff *Nerdso figured I’d join and see if I can find some help as I’ve been pulling my hair out the last 3 days *Banghead
I’m running Windows 10 (1602) on brand new computer, and…
Users found this page by searching for:
-
error 1722 getting session names msg
,
-
error 1722 getting session names
,
-
error 1722 getting session names cmd
,
- error 1722 getting session name
Trying to send a broadcast from Windows Server 2008 to a XP station
Use msg.exe (net send does not exist anymore)
Gives the above message
But from the server to the server it works, and also from the station to itself, so it seems RPC is okay on both platform …
NetworkingMicrosoft Legacy OS
Last Comment
Russell_Venable
8/22/2022 — Mon
It works only on a DOMAIN environment, but if you have a WORKGROUP. It won’t work.
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a
7-Day free trial
and enjoy unlimited access to the platform.
It is in a DOMAIN dear friends
But did you visit that link ?
Yes but it did not help me
It is maybe a problem of firewall …
Does msg.exe uses a specific port ?
Are you sure you don’t have terminal services running? This is a dependancy for this to run.
I assume this is the exact error you receiving.
«Error [1722]:The RPC server is unavailable.» you need to add a registry key.
HKLMSYSTEMCurrentControlSetControlTerminal Server
Name: AllowRemoteRPC
Type: REG_DWORD
Value : 1
This enables remote RPC. RPC is port 135.
Then try «msg * /server:<domainname> «message» this will broadcast on your domain.
msg.exe does not seem to work in all cases !
Russell_Venable
12/23/2011
Thanks for replying. Yes, msg.exe runs using the «RpcSs» Service. Can you run «sc query RpcSss | FIND «STATE» » and display it’s output?
the sc query says that RpcSss does not exist as an installed service …
Russell_Venable
12/23/2011
Try dropping the last s and try it again.
No answer solving my problem
Sorry about that, I had many other tasks to do, and this one was not a top priority
I will come on it soon
sc query rpcss state is RUNNING
still get error 1722
Can you post a example of the command you are using. You can omit exact domain and username using a generic format instead as long as it shows exactly what your typing for the command.
I am logged on server Windows 2008
Its name is zavnt302 and the account I am logged on is vobadm
I have another PC, named h3ysh2j where I am logged on as taymans
From the server, I issue this : msg taymans /server:h2ysh2j «Hello World !»
I get the error 1722
From the server, I issue now : msg vobadm /server:zavnt302 «Hello World !»
I get the broadcast popup message
From the PC, I issue this : net send taymans «Hello World !»
I get the broadcast popup message
Well I looked further at the problem. This usually occurs when the issuer does not give «domainuser» in the command. So try entering the command «msg «h2ysh2j taymans» /server:h2ysh2j «Hello World !» » and for the other «msg «zavnt302vobadm» /server:zavnt302 «Hello World !»». See if that resolves your issue.
We are in a real domain
I tried both your syntax and also with domainuser
The first (msg to other computer) failed both ways
The second (msg to local) failed (did not without) with this : zavnt302vobadm does not exist ir is disconnected…
Ok, Hmm, that is how the error message is diagnosed directly from MSDN. Thought it was worth a try. Well I do know it’s a drastic change in the protocol used. May need to look into it some more and since your method works on both servers but not the XP workstation, if no real workaround exists then there maybe a 3rd party service that you can install that supports all platforms involved. Just a thought.
The more I look at this. It becomes apparent that XP either is not setup correctly, incompatible to receive msg.exe RCP traffic like this or is getting blocked, since the server to server works fine. I would lean towards XP being the main problem and point all troubleshooting in this direction.
Thanks for the investigation but what can I do now at client side ?
Is your XP client setup correctly as a terminal client role? Msg.exe runs on RPC protocol and Terminal Services. This being said it utilitizes port «3389». Which is also known as Remote Desktop Protocol. Do you have this enabled??? We already know RPC service is running from previous posts.
-
- Sep 25, 2013
-
- 16
-
- 0
-
- 10,510
- 0
-
#1
-
- Jun 12, 2013
-
- 14,851
-
- 8
-
- 74,965
- 3,276
-
#2
try using ip address instead of computer name.
-
- Sep 25, 2013
-
- 16
-
- 0
-
- 10,510
-
- 0
-
#3
-
- Jun 12, 2013
-
- 14,851
-
- 8
-
- 74,965
- 3,276
-
#4
Using IP address will still help if it is a name resolution issue.
Try typing ipconfig /all
If the DNS address is not the same as the gateway address then that would also cause this issue.
-
- Sep 25, 2013
-
- 16
-
- 0
-
- 10,510
- 0
-
#5
-
#6
Hope this info will help to someone… I didn’t know till I discovered this problem… M.R.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
|
Question DNS Error But Doesn’t Affect Remote Desktop | Networking | 1 | Friday at 1:49 PM |
R
|
Question Cannot access Google sites — page appears for a few seconds before error shown | Networking | 2 | Jan 29, 2023 |
H
|
Question Modem Constantly Restarts due to Multiple different Errors (CM1200) | Networking | 18 | Jan 1, 2023 |
C
|
Question Wifi dropping connection — Modem getting errors | Networking | 2 | Nov 9, 2022 |
|
Question Internet doesn’t work despite being connected? | Networking | 2 | Oct 19, 2022 |
C
|
Question An update regarding my mystery networking tech issue. | Networking | 5 | Oct 6, 2022 |
J
|
Question Youtube causing network limited error | Networking | 1 | Oct 2, 2022 |
|
Question FIlezilla error solved, but I have a question | Networking | 4 | Sep 12, 2022 |
W
|
[SOLVED] New build now getting » Ethernet doesn’t have a Valid IP Configuration» error ? | Networking | 1 | Aug 19, 2022 |
H
|
Question Retry errors with Intel X540-T2 10Gbit nic’s | Networking | 3 | Aug 9, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics