Не удается экспортировать реестр ошибка при записи файла

Everytime I try to export HKLM and HKU as Registry Hive Files using regedit,
I get the following
error message:

Registry Editor
Cannot export D:HivesLocal Machine: Error writing the file. There may be a
disk or file system
error.

I am trying to export the above mentioned hive to my second hdd. Can anyone
tell me what I am
doing wrong?

I’m using WinXP Pro SP2.

What have I tried? I did a clean install for WinXP with no service
pack update on a new hdd. As soon as the installation was complete, I
used regedit to access the registry. I tried to export HKLM as a
registry hive file to my desktop and received the a similar error
message.

I am not experiencing this problem when I export HKCR, HKCU, and HKCC as
Registry Hive Files.

I have administrator rights. Can anyone help? Thanx

Note: The «Export registry» function in Regedit is USELESS (!) to
make a complete backup of the registry

Get both of these…

NTREGOPT NT Registry Optimizer
ERUNT The Emergency Recovery Utility NT
http://www.larshederer.homepage.t-online.de/erunt/

Direct download links (the zip files just need unzipping and dropping on the
drive. {Thank you, Jim}
http://aumha.org/downloads/erunt.zip

http://aumha.org/downloads/ntregopt.zip

ERUNT [[Note: The «Export registry» function in Regedit is USELESS (!) to
make a complete backup of the registry. Neither does it export the whole
registry (for example, no information from the «SECURITY» hive is
saved), nor can the exported file be used later to replace the current
registry with the old one. Instead, if you re-import the file, it is
merged with the current registry, leaving you with an absolute mess of
old and new registry keys.]]
http://home.t-online.de/home/lars.hederer/erunt/erunt.txt

NTREGOPT [[Similar to Windows 9x/Me, the registry files in an NT-based
system can become fragmented over time, occupying more space on your hard
disk than necessary and decreasing overall performance. You should
use the NTREGOPT utility regularly, but especially after installing
or uninstalling a program, to minimize the size of the registry files
and optimize registry access.

The program works by recreating each registry hive «from scratch»,
thus removing any slack space that may be left from previously
modified or deleted keys.

Note that the program does NOT change the contents of the registry in
any way, nor does it physically defrag the registry files on the drive
(as the PageDefrag program from SysInternals does). The optimization
done by NTREGOPT is simply compacting the registry hives to the
minimum size possible.]]
http://home.t-online.de/home/lars.hederer/erunt/ntregopt.txt

Installing & Using ERUNT
http://www.silentrunners.org/sr_eruntuse.html

To see an illustrated registry restore procedure
http://www.silentrunners.org/sr_erdntuse.html

—
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:22B11F6D-DD06-4750-9F5D-43396F438556@microsoft.com,
ill4good <ill4good@discussions.microsoft.com> hunted and pecked:
> Everytime I try to export HKLM and HKU as Registry Hive Files using
> regedit, I get the following
> error message:
>
>
> Registry Editor
> Cannot export D:HivesLocal Machine: Error writing the file. There may
> be a disk or file system
> error.
>
>
> I am trying to export the above mentioned hive to my second hdd. Can
> anyone tell me what I am
> doing wrong?
>
> I’m using WinXP Pro SP2.
>
> What have I tried? I did a clean install for WinXP with no service
> pack update on a new hdd. As soon as the installation was complete, I
> used regedit to access the registry. I tried to export HKLM as a
> registry hive file to my desktop and received the a similar error
> message.
>
> I am not experiencing this problem when I export HKCR, HKCU, and HKCC as
> Registry Hive Files.
>
> I have administrator rights. Can anyone help? Thanx

«Wesley Vogel» wrote:

> Note: The «Export registry» function in Regedit is USELESS (!) to
> make a complete backup of the registry
>
> Get both of these…
>
> NTREGOPT NT Registry Optimizer
> ERUNT The Emergency Recovery Utility NT
> http://www.larshederer.homepage.t-online.de/erunt/
>
> Direct download links (the zip files just need unzipping and dropping on the
> drive. {Thank you, Jim}
> http://aumha.org/downloads/erunt.zip
>
> http://aumha.org/downloads/ntregopt.zip
>
> ERUNT [[Note: The «Export registry» function in Regedit is USELESS (!) to
> make a complete backup of the registry. Neither does it export the whole
> registry (for example, no information from the «SECURITY» hive is
> saved), nor can the exported file be used later to replace the current
> registry with the old one. Instead, if you re-import the file, it is
> merged with the current registry, leaving you with an absolute mess of
> old and new registry keys.]]
> http://home.t-online.de/home/lars.hederer/erunt/erunt.txt
>
> NTREGOPT [[Similar to Windows 9x/Me, the registry files in an NT-based
> system can become fragmented over time, occupying more space on your hard
> disk than necessary and decreasing overall performance. You should
> use the NTREGOPT utility regularly, but especially after installing
> or uninstalling a program, to minimize the size of the registry files
> and optimize registry access.
>
> The program works by recreating each registry hive «from scratch»,
> thus removing any slack space that may be left from previously
> modified or deleted keys.
>
> Note that the program does NOT change the contents of the registry in
> any way, nor does it physically defrag the registry files on the drive
> (as the PageDefrag program from SysInternals does). The optimization
> done by NTREGOPT is simply compacting the registry hives to the
> minimum size possible.]]
> http://home.t-online.de/home/lars.hederer/erunt/ntregopt.txt
>
> Installing & Using ERUNT
> http://www.silentrunners.org/sr_eruntuse.html
>
> To see an illustrated registry restore procedure
> http://www.silentrunners.org/sr_erdntuse.html
>
> —
> Hope this helps. Let us know.
>
> Wes
> MS-MVP Windows Shell/User
>

Wes,
I thank you for replying to my request for help. The information that you
have provided me has helped me to understand the problem that I am
experiencing. Prior to posting my problem here I have posted in six forums,
including MSFN and The Elder Geek, without success. I have read about ERUNT
and NTREGOPT in my travels. I already d/l’ed and installed both progs.
NTREGOPT can be found as an app in the ERUNT execution directory.

I now know that any problem that I can’t resolve can always be dealt with in
this and other Microsoft newsgroups.

Thanks again…
ill4good

Keep having fun.

—
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:A7F08A39-15CB-465C-A05E-081C303DE4C7@microsoft.com,
ill4good <ill4good@discussions.microsoft.com> hunted and pecked:
> «Wesley Vogel» wrote:
>
>> Note: The «Export registry» function in Regedit is USELESS (!) to
>> make a complete backup of the registry
>>
>> Get both of these…
>>
>> NTREGOPT NT Registry Optimizer
>> ERUNT The Emergency Recovery Utility NT
>> http://www.larshederer.homepage.t-online.de/erunt/
>>
>> Direct download links (the zip files just need unzipping and dropping on
>> the drive. {Thank you, Jim}
>> http://aumha.org/downloads/erunt.zip
>>
>> http://aumha.org/downloads/ntregopt.zip
>>
>> ERUNT [[Note: The «Export registry» function in Regedit is USELESS (!)
>> to make a complete backup of the registry. Neither does it export the
>> whole registry (for example, no information from the «SECURITY» hive is
>> saved), nor can the exported file be used later to replace the current
>> registry with the old one. Instead, if you re-import the file, it is
>> merged with the current registry, leaving you with an absolute mess of
>> old and new registry keys.]]
>> http://home.t-online.de/home/lars.hederer/erunt/erunt.txt
>>
>> NTREGOPT [[Similar to Windows 9x/Me, the registry files in an NT-based
>> system can become fragmented over time, occupying more space on your hard
>> disk than necessary and decreasing overall performance. You should
>> use the NTREGOPT utility regularly, but especially after installing
>> or uninstalling a program, to minimize the size of the registry files
>> and optimize registry access.
>>
>> The program works by recreating each registry hive «from scratch»,
>> thus removing any slack space that may be left from previously
>> modified or deleted keys.
>>
>> Note that the program does NOT change the contents of the registry in
>> any way, nor does it physically defrag the registry files on the drive
>> (as the PageDefrag program from SysInternals does). The optimization
>> done by NTREGOPT is simply compacting the registry hives to the
>> minimum size possible.]]
>> http://home.t-online.de/home/lars.hederer/erunt/ntregopt.txt
>>
>> Installing & Using ERUNT
>> http://www.silentrunners.org/sr_eruntuse.html
>>
>> To see an illustrated registry restore procedure
>> http://www.silentrunners.org/sr_erdntuse.html
>>
>> —
>> Hope this helps. Let us know.
>>
>> Wes
>> MS-MVP Windows Shell/User
>>
>
> Wes,
> I thank you for replying to my request for help. The information that you
> have provided me has helped me to understand the problem that I am
> experiencing. Prior to posting my problem here I have posted in six
> forums, including MSFN and The Elder Geek, without success. I have read
> about ERUNT and NTREGOPT in my travels. I already d/l’ed and installed
> both progs. NTREGOPT can be found as an app in the ERUNT execution
> directory.
>
> I now know that any problem that I can’t resolve can always be dealt with
> in this and other Microsoft newsgroups.
>
> Thanks again…
> ill4good

Everytime I try to export HKLM and HKU as Registry Hive Files using regedit,
I get the following
error message:

Registry Editor
Cannot export D:HivesLocal Machine: Error writing the file. There may be a
disk or file system
error.

I am trying to export the above mentioned hive to my second hdd. Can anyone
tell me what I am
doing wrong?

I’m using WinXP Pro SP2.

What have I tried? I did a clean install for WinXP with no service
pack update on a new hdd. As soon as the installation was complete, I
used regedit to access the registry. I tried to export HKLM as a
registry hive file to my desktop and received the a similar error
message.

I am not experiencing this problem when I export HKCR, HKCU, and HKCC as
Registry Hive Files.

I have administrator rights. Can anyone help? Thanx

Note: The «Export registry» function in Regedit is USELESS (!) to
make a complete backup of the registry

Get both of these…

NTREGOPT NT Registry Optimizer
ERUNT The Emergency Recovery Utility NT
http://www.larshederer.homepage.t-online.de/erunt/

Direct download links (the zip files just need unzipping and dropping on the
drive. {Thank you, Jim}
http://aumha.org/downloads/erunt.zip

http://aumha.org/downloads/ntregopt.zip

ERUNT [[Note: The «Export registry» function in Regedit is USELESS (!) to
make a complete backup of the registry. Neither does it export the whole
registry (for example, no information from the «SECURITY» hive is
saved), nor can the exported file be used later to replace the current
registry with the old one. Instead, if you re-import the file, it is
merged with the current registry, leaving you with an absolute mess of
old and new registry keys.]]
http://home.t-online.de/home/lars.hederer/erunt/erunt.txt

NTREGOPT [[Similar to Windows 9x/Me, the registry files in an NT-based
system can become fragmented over time, occupying more space on your hard
disk than necessary and decreasing overall performance. You should
use the NTREGOPT utility regularly, but especially after installing
or uninstalling a program, to minimize the size of the registry files
and optimize registry access.

The program works by recreating each registry hive «from scratch»,
thus removing any slack space that may be left from previously
modified or deleted keys.

Note that the program does NOT change the contents of the registry in
any way, nor does it physically defrag the registry files on the drive
(as the PageDefrag program from SysInternals does). The optimization
done by NTREGOPT is simply compacting the registry hives to the
minimum size possible.]]
http://home.t-online.de/home/lars.hederer/erunt/ntregopt.txt

Installing & Using ERUNT
http://www.silentrunners.org/sr_eruntuse.html

To see an illustrated registry restore procedure
http://www.silentrunners.org/sr_erdntuse.html

—
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:22B11F6D-DD06-4750-9F5D-43396F438556@microsoft.com,
ill4good <ill4good@discussions.microsoft.com> hunted and pecked:
> Everytime I try to export HKLM and HKU as Registry Hive Files using
> regedit, I get the following
> error message:
>
>
> Registry Editor
> Cannot export D:HivesLocal Machine: Error writing the file. There may
> be a disk or file system
> error.
>
>
> I am trying to export the above mentioned hive to my second hdd. Can
> anyone tell me what I am
> doing wrong?
>
> I’m using WinXP Pro SP2.
>
> What have I tried? I did a clean install for WinXP with no service
> pack update on a new hdd. As soon as the installation was complete, I
> used regedit to access the registry. I tried to export HKLM as a
> registry hive file to my desktop and received the a similar error
> message.
>
> I am not experiencing this problem when I export HKCR, HKCU, and HKCC as
> Registry Hive Files.
>
> I have administrator rights. Can anyone help? Thanx

«Wesley Vogel» wrote:

> Note: The «Export registry» function in Regedit is USELESS (!) to
> make a complete backup of the registry
>
> Get both of these…
>
> NTREGOPT NT Registry Optimizer
> ERUNT The Emergency Recovery Utility NT
> http://www.larshederer.homepage.t-online.de/erunt/
>
> Direct download links (the zip files just need unzipping and dropping on the
> drive. {Thank you, Jim}
> http://aumha.org/downloads/erunt.zip
>
> http://aumha.org/downloads/ntregopt.zip
>
> ERUNT [[Note: The «Export registry» function in Regedit is USELESS (!) to
> make a complete backup of the registry. Neither does it export the whole
> registry (for example, no information from the «SECURITY» hive is
> saved), nor can the exported file be used later to replace the current
> registry with the old one. Instead, if you re-import the file, it is
> merged with the current registry, leaving you with an absolute mess of
> old and new registry keys.]]
> http://home.t-online.de/home/lars.hederer/erunt/erunt.txt
>
> NTREGOPT [[Similar to Windows 9x/Me, the registry files in an NT-based
> system can become fragmented over time, occupying more space on your hard
> disk than necessary and decreasing overall performance. You should
> use the NTREGOPT utility regularly, but especially after installing
> or uninstalling a program, to minimize the size of the registry files
> and optimize registry access.
>
> The program works by recreating each registry hive «from scratch»,
> thus removing any slack space that may be left from previously
> modified or deleted keys.
>
> Note that the program does NOT change the contents of the registry in
> any way, nor does it physically defrag the registry files on the drive
> (as the PageDefrag program from SysInternals does). The optimization
> done by NTREGOPT is simply compacting the registry hives to the
> minimum size possible.]]
> http://home.t-online.de/home/lars.hederer/erunt/ntregopt.txt
>
> Installing & Using ERUNT
> http://www.silentrunners.org/sr_eruntuse.html
>
> To see an illustrated registry restore procedure
> http://www.silentrunners.org/sr_erdntuse.html
>
> —
> Hope this helps. Let us know.
>
> Wes
> MS-MVP Windows Shell/User
>

Wes,
I thank you for replying to my request for help. The information that you
have provided me has helped me to understand the problem that I am
experiencing. Prior to posting my problem here I have posted in six forums,
including MSFN and The Elder Geek, without success. I have read about ERUNT
and NTREGOPT in my travels. I already d/l’ed and installed both progs.
NTREGOPT can be found as an app in the ERUNT execution directory.

I now know that any problem that I can’t resolve can always be dealt with in
this and other Microsoft newsgroups.

Thanks again…
ill4good

Keep having fun.

—
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:A7F08A39-15CB-465C-A05E-081C303DE4C7@microsoft.com,
ill4good <ill4good@discussions.microsoft.com> hunted and pecked:
> «Wesley Vogel» wrote:
>
>> Note: The «Export registry» function in Regedit is USELESS (!) to
>> make a complete backup of the registry
>>
>> Get both of these…
>>
>> NTREGOPT NT Registry Optimizer
>> ERUNT The Emergency Recovery Utility NT
>> http://www.larshederer.homepage.t-online.de/erunt/
>>
>> Direct download links (the zip files just need unzipping and dropping on
>> the drive. {Thank you, Jim}
>> http://aumha.org/downloads/erunt.zip
>>
>> http://aumha.org/downloads/ntregopt.zip
>>
>> ERUNT [[Note: The «Export registry» function in Regedit is USELESS (!)
>> to make a complete backup of the registry. Neither does it export the
>> whole registry (for example, no information from the «SECURITY» hive is
>> saved), nor can the exported file be used later to replace the current
>> registry with the old one. Instead, if you re-import the file, it is
>> merged with the current registry, leaving you with an absolute mess of
>> old and new registry keys.]]
>> http://home.t-online.de/home/lars.hederer/erunt/erunt.txt
>>
>> NTREGOPT [[Similar to Windows 9x/Me, the registry files in an NT-based
>> system can become fragmented over time, occupying more space on your hard
>> disk than necessary and decreasing overall performance. You should
>> use the NTREGOPT utility regularly, but especially after installing
>> or uninstalling a program, to minimize the size of the registry files
>> and optimize registry access.
>>
>> The program works by recreating each registry hive «from scratch»,
>> thus removing any slack space that may be left from previously
>> modified or deleted keys.
>>
>> Note that the program does NOT change the contents of the registry in
>> any way, nor does it physically defrag the registry files on the drive
>> (as the PageDefrag program from SysInternals does). The optimization
>> done by NTREGOPT is simply compacting the registry hives to the
>> minimum size possible.]]
>> http://home.t-online.de/home/lars.hederer/erunt/ntregopt.txt
>>
>> Installing & Using ERUNT
>> http://www.silentrunners.org/sr_eruntuse.html
>>
>> To see an illustrated registry restore procedure
>> http://www.silentrunners.org/sr_erdntuse.html
>>
>> —
>> Hope this helps. Let us know.
>>
>> Wes
>> MS-MVP Windows Shell/User
>>
>
> Wes,
> I thank you for replying to my request for help. The information that you
> have provided me has helped me to understand the problem that I am
> experiencing. Prior to posting my problem here I have posted in six
> forums, including MSFN and The Elder Geek, without success. I have read
> about ERUNT and NTREGOPT in my travels. I already d/l’ed and installed
> both progs. NTREGOPT can be found as an app in the ERUNT execution
> directory.
>
> I now know that any problem that I can’t resolve can always be dealt with
> in this and other Microsoft newsgroups.
>
> Thanks again…
> ill4good