Netload ftpxfer2 error

Проблема с загрузкой через netload
  • Печать

Страницы: [1] 2 3  Все   Вниз

Тема: Проблема с загрузкой через netload  (Прочитано 11100 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Помогите разобраться, пользовался ранее в офисе на autocad 2013 кодом для отрисовывания схем на основании данных забитых в Excel
Сейчас нужно дома этим заниматься, файл .dll не запускается.
Есть непосредственно файл .dll и исходник,который писали в visual basic.
Непосредственно в написании кода не разбираюсь/
Библиотеки objectarx ставил на компьютер, но ничего не работает.
Как узнать,что еще требуется?


Записан

Как узнать,что еще требуется?

Требуются исходники и указание версии/разрядности AutoCAD, под которым должно работать.


Записан

у меня есть еще некоторые файлы, но если я правильно понимаю, то компиляции достаточно одного файла -именно с кодом, правильно?
работать должно не важно на какой версии autocad — хорошо бы на 2017, но файл писался для 2013. а битность -64


Записан

Это файл проекта, а не исходник. Необходимы все файлы.


Записан

Все файлы,которые у меня есть в архиве,
какого типа файл,который является исходником?


Записан

Если это всё что есть, то это больше похоже на мусор, а не на программу. В AutoCAD это грузится, но ничего не делает, так как там нет команды для выполнения.


Записан

Да, все,что есть, нужных файлов нет?
Если нет, то могли бы вы посоветовать,кто пишет различные коды,к кому можно обратиться?


Записан

Есть еще такой рабочий файл, он у меня запускается и выпадает меню из файла, но выскакивает ошибка — Приложение не поддерживает оперативную (JIT)
отладку. Подробная информацию приводится в конце данного сообщения. и тп.

Работать этот код должен по следующему сценарию:
1 через netload грузим vimedia.dll
2 в командной строке вбиваем vimedia и выскакивает список команд из кода
3 при этом данные для обработки берутся из excel


Записан

Если это всё что есть, то это больше похоже на мусор, а не на программу. В AutoCAD это грузится, но ничего не делает, так как там нет команды для выполнения.

После того как файл загрузился- нужно набирать viart и должны выскакивать команды из кода/
после загрузки через netload ничего не происходит- это верно


Записан


Записан

а по ошибке с оперативной отладкой Jit можете что-то посоветовать? на форуме уже видел этот вопрос, но ни переустановка acad ни новый framework не помогли


Записан


Записан

Я перекомпилировал под AutoCAD 2013. Но там прописаны полные пути к файлу на сервере, которые тебе придётся изменить — иначе работать не будет.


Записан

Здорово, у меня стало запускаться.
про ссылки к файлам я знаю.
Файл, который вы прокомпилировали,там ведется расчет спецификации,
 а мне нужен в котором есть такое:
Public Function kolvo_attributes

буду вам чудовищно признателен,если прокомпилируете еще раз другой исходник)


Записан

буду вам чудовищно признателен,если прокомпилируете еще раз другой исходник)

Я перекомпилировал всё, что ты дал. Там есть и указанная тобой функция. И две команды:
Viart2_Спецификация_ЭОМ
Viart2_Спецификация_АСУ


Записан

  • Печать

Страницы: [1] 2 3  Все   Вверх

Источник

Trying to load a plugin which works fine in version 2011, but gives an error when doing a ‘netload’ in Autocad 2012.  In both cases the same dll is being loaded.   Any help greatly appreciated…the error is:

Cannot load assembly. Error details: System.IO.FileLoadException: Could not
load file or assembly ‘file:///C:Program FilesAutodeskAutoCAD 2012 —
EnglishPluginsAccessibleADNPlugin-OffsetInXref.dll’ or one of its
dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)
File name: ‘file:///C:Program FilesAutodeskAutoCAD 2012 —
EnglishPluginsAccessibleADNPlugin-OffsetInXref.dll’ —>
System.NotSupportedException: An attempt was made to load an assembly from a
network location which would have caused the assembly to be sandboxed in
previous versions of the .NET Framework. This release of the .NET Framework
does not enable CAS policy by default, so this load may be dangerous. If this
load is not intended to sandbox the assembly, please enable the
loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569
for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String
codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint,
StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean
forIntrospection, Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName
assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean
forIntrospection, Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile,
Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm
hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks,
StackCrawlMark& stackMark)
   at System.Reflection.Assembly.LoadFrom(String assemblyFile)
   at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
   at loadmgd()

Источник

Moderator: Project members

kingzymonph

500 Command not understood
Posts: 1
Joined: 2015-06-29 14:18

critical file transfer error

#1

Post

by kingzymonph » 2015-06-29 14:34

hi there, this is gonna be my first website project to open but i couldn’t transfer my html file using filezilla app.
here are the logs:

Retrieving directory listing…
Status: Directory listing of «/» successful
Status: Resolving address of f5-preview.biz.nf
Status: Connecting to 83.125.22.185:21…
Status: Connection established, waiting for welcome message…
Status: Insecure server, it does not support FTP over TLS.
Status: Connected
Status: Starting upload of C:UsersRICKYDesktopMy Webpageindex.html
Command: CWD /
Response: 250 CWD command successful
Command: TYPE A
Response: 200 Type set to A
Command: PASV
Response: 227 Entering Passive Mode (83,125,22,185,192,108)
Command: STOR index.html
Response: 550 index.html: Permission denied
Error: Critical file transfer error

Please help me out… thank you so much in advance.

User avatar

boco

Contributor
Posts: 26451
Joined: 2006-05-01 03:28
Location: Germany

Re: critical file transfer error

#2

Post

by boco » 2015-06-29 15:11

Looks like you have no permission to write (upload) to that specific location.

Check if there’s a special subdirectory for website files (frequently named public_html, ht_docs, Inetpub or www). If there isn’t, or it doesn’t work, also, you need to contact server support.

### BEGIN SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
### END SIGNATURE BLOCK ###

User avatar

botg

Site Admin
Posts: 34744
Joined: 2004-02-23 20:49
First name: Tim
Last name: Kosse
Contact:

Re: critical file transfer error

#3

Post

by botg » 2015-06-29 15:58

Response: 550 index.html: Permission denied

You lack permission to upload files. Contact your server administrator or server hosting provider to request permission.

jimmyr

500 Command not understood
Posts: 1
Joined: 2016-01-03 19:50
First name: Jimmy
Last name: Rossow

Re: critical file transfer error

#4

Post

by jimmyr » 2016-01-03 19:55

I encountered this problem after upgrading to Ubuntu 15.04. It seems that vsftpd.conf had been overwritten with an unmodified/generic version. This wiped out write permissions, no matter what the folders were set to. Here’s how I got FZ moving files again:

By default vsftpd is configured to authenticate system users and allow them to download files. If you want users to be able to upload files, edit /etc/vsftpd.conf:

Now restart vsftpd:

Now when system users login to FTP they will start in their home directories where they can download, upload, create directories, etc.

Источник

FTP OS: Windows

FTP Server: FileZilla (latest (1.0.1)

Computer OS: Windows

FluentFTP Version: 35.0.5

Attempting to upload a file to FileZilla from C# (.net 3.1) using explicit TLS fails to perform TLS handshake (note «Connect» is successful)

This can be replicated every time (I’ve done it on 3 machines) by debugging the following code after installing FileZilla on a windows machine.

FileZilla settings — Under FTP Server

  • Protocol: «Require explicit FTP over TLS»

I have also tried downloading the certificates via openssl and added them in to the code below, but with the same results.

 using var client = new FtpClient("127.0.0.1", 21, "orderease", "xxx")
            {
                SocketKeepAlive = true,
                ValidateAnyCertificate = true,
                SslProtocols = SslProtocols.Tls12,
                EncryptionMode = FtpEncryptionMode.Explicit,
                DataConnectionType = FtpDataConnectionType.PASV,
            };


            var ftpLog = new StringBuilder();
            client.OnLogEvent = (level, s) => { ftpLog.AppendLine(level + " - " + s); };
            client.Connect();
            client.SetWorkingDirectory("/GMS-EDI/GMS_Order");
            
            var response = client.Upload(Encoding.ASCII.GetBytes(content), $"{fileName}.txt");
            if (response == FtpStatus.Failed)
            {
                log.LogError("Failed to upload ");
                log.LogError(ftpLog.ToString());
            }

            client.Disconnect();

Logs :
Filezilla Logs

2021-10-28T18:08:42.299Z >> [FTP Session 26 127.0.0.1 orderease] SYST
2021-10-28T18:08:42.299Z << [FTP Session 26 127.0.0.1 orderease] 215 UNIX emulated by FileZilla.
2021-10-28T18:08:49.043Z >> [FTP Session 26 127.0.0.1 orderease] CWD /GMS-EDI/GMS_Order
2021-10-28T18:08:49.043Z << [FTP Session 26 127.0.0.1 orderease] 250 CWD command successful
2021-10-28T18:08:52.655Z >> [FTP Session 26 127.0.0.1 orderease] PWD
2021-10-28T18:08:52.655Z << [FTP Session 26 127.0.0.1 orderease] 257 "/GMS-EDI/GMS_Order" is current directory.
2021-10-28T18:08:52.655Z >> [FTP Session 26 127.0.0.1 orderease] SIZE /GMS-EDI/GMS_Order/SPISO-20211028124510-N.txt
2021-10-28T18:08:52.655Z << [FTP Session 26 127.0.0.1 orderease] 213 892
2021-10-28T18:08:52.656Z >> [FTP Session 26 127.0.0.1 orderease] DELE SPISO-20211028124510-N.txt
2021-10-28T18:08:52.656Z << [FTP Session 26 127.0.0.1 orderease] 250 File deleted successfully.
2021-10-28T18:08:52.657Z >> [FTP Session 26 127.0.0.1 orderease] TYPE I
2021-10-28T18:08:52.657Z << [FTP Session 26 127.0.0.1 orderease] 200 Type set to I
2021-10-28T18:08:52.660Z >> [FTP Session 26 127.0.0.1 orderease] PASV
2021-10-28T18:08:52.660Z VV [FTP Session 26 127.0.0.1 orderease] Trying: data_listen_socket_->listen(1, 0)
2021-10-28T18:08:52.660Z << [FTP Session 26 127.0.0.1 orderease] 227 Entering Passive Mode (127,0,0,1,204,126)
2021-10-28T18:08:52.661Z VV [FTP Session 26 127.0.0.1 orderease] session::on_socket_event(): source = data listen, flag = 2, error = 0, state = -1
2021-10-28T18:08:52.662Z VV [FTP Session 26 127.0.0.1 orderease] tls_layer_impl::server_handshake()
2021-10-28T18:08:52.662Z VV [FTP Session 26 127.0.0.1 orderease] tls_layer_impl::continue_handshake()
2021-10-28T18:08:52.662Z VV [FTP Session 26 127.0.0.1 orderease] tls_layer_impl::continue_handshake()
2021-10-28T18:08:52.662Z >> [FTP Session 26 127.0.0.1 orderease] STOR SPISO-20211028124510-N.txt
2021-10-28T18:08:52.662Z << [FTP Session 26 127.0.0.1 orderease] 150 Starting data transfer.
2021-10-28T18:08:52.663Z VV [FTP Session 26 127.0.0.1 orderease] tls_layer_impl::continue_handshake()
2021-10-28T18:08:52.666Z VV [FTP Session 26 127.0.0.1 orderease] tls_layer_impl::continue_handshake()
2021-10-28T18:08:52.666Z II [FTP Session 26 127.0.0.1 orderease] TLS Handshake successful
2021-10-28T18:08:52.666Z II [FTP Session 26 127.0.0.1 orderease] TLS Session resumed
2021-10-28T18:08:52.666Z II [FTP Session 26 127.0.0.1 orderease] Protocol: TLS1.2, Key exchange: ECDHE-X25519, Cipher: AES-256-GCM, MAC: AEAD
2021-10-28T18:08:52.666Z VV [FTP Session 26 127.0.0.1 orderease] session::on_socket_event(): source = data, flag = 2, error = 0, state = 2
2021-10-28T18:08:52.667Z !! [FTP Session 26 127.0.0.1 orderease] GnuTLS error -110 in gnutls_record_recv: The TLS connection was non-properly terminated.
2021-10-28T18:08:52.667Z == [FTP Session 26 127.0.0.1 orderease] Client did not properly shut down TLS connection
2021-10-28T18:08:52.667Z VV [FTP Session 26 127.0.0.1 orderease] tls_layer_impl::shutdown()
2021-10-28T18:08:52.667Z VV [FTP Session 26 127.0.0.1 orderease] data_socket_->shutdown() = 126
2021-10-28T18:08:52.667Z << [FTP Session 26 127.0.0.1 orderease] 425 Error while transfering data: ECONNABORTED - Connection aborted
2021-10-28T18:08:52.667Z VV [FTP Session 26 127.0.0.1 orderease] session::close_data_connection() = 1
2021-10-28T18:08:57.659Z !! [FTP Session 26 127.0.0.1 orderease] Control channel closed with error from source 0. Reason: ECONNABORTED - Connection aborted.
2021-10-28T18:08:57.659Z !! [FTP Server] Session ended with error from source 0. Reason: ECONNABORTED - Connection aborted.

FluentFTP logs


[2021-10-28T18:18:49.266Z] Failed to upload
[2021-10-28T18:18:49.903Z] Verbose - >         Connect()
[2021-10-28T18:18:49.904Z] Info - Status:   Connecting to 127.0.0.1:21
[2021-10-28T18:18:49.905Z] Verbose - Response: 220-FileZilla Server 1.0.1
[2021-10-28T18:18:49.905Z] Info - Response: 220 Please visit https://filezilla-project.org/
[2021-10-28T18:18:49.906Z] Info - Status:   Detected FTP server: FileZilla
[2021-10-28T18:18:49.907Z] Info - Command:  AUTH TLS
[2021-10-28T18:18:49.908Z] Info - Response: 234 Using authentication type TLS.
[2021-10-28T18:18:49.909Z] Info - Status:   FTPS Authentication Successful
[2021-10-28T18:18:49.910Z] Verbose - Status:   Time to activate encryption: 0h 0m 0s.  Total Seconds: 0.0273426.
[2021-10-28T18:18:49.911Z] Info - Command:  USER orderease
[2021-10-28T18:18:49.912Z] Info - Response: 331 Please, specify the password.
[2021-10-28T18:18:49.913Z] Info - Command:  PASS ***
[2021-10-28T18:18:49.914Z] Info - Response: 230 Login successful.
[2021-10-28T18:18:49.915Z] Info - Command:  PBSZ 0
[2021-10-28T18:18:49.916Z] Info - Response: 200 PBSZ=0
[2021-10-28T18:18:49.917Z] Info - Command:  PROT P
[2021-10-28T18:18:49.918Z] Info - Response: 200 Protection level set to P
[2021-10-28T18:18:49.919Z] Info - Command:  FEAT
[2021-10-28T18:18:49.920Z] Verbose - Response: 211-Features:
Response: MDTM
Response: REST STREAM
Response: SIZE
Response: MLST type*;size*;modify*;perm*;
Response: MLSD
Response: AUTH SSL
Response: AUTH TLS
Response: PROT
Response: PBSZ
Response: UTF8
Response: TVFS
Response: EPSV
Response: EPRT
Response: MFMT
[2021-10-28T18:18:49.923Z] Info - Response: 211 End
[2021-10-28T18:18:49.924Z] Info - Status:   Text encoding: System.Text.UTF8Encoding+UTF8EncodingSealed
[2021-10-28T18:18:49.925Z] Info - Command:  OPTS UTF8 ON
[2021-10-28T18:18:49.926Z] Info - Response: 202 UTF8 mode is always enabled. No need to send this command
[2021-10-28T18:18:49.927Z] Info - Command:  SYST
[2021-10-28T18:18:49.928Z] Info - Response: 215 UNIX emulated by FileZilla.
[2021-10-28T18:18:49.930Z] Verbose - >         SetWorkingDirectory("/GMS-EDI/GMS_Order")
[2021-10-28T18:18:49.931Z] Info - Command:  CWD /GMS-EDI/GMS_Order
[2021-10-28T18:18:49.932Z] Info - Response: 250 CWD command successful
[2021-10-28T18:18:49.933Z] Verbose - >         Upload("SPISO-20211028124510-N.txt", Overwrite, False)
[2021-10-28T18:18:49.934Z] Verbose - >         FileExists("SPISO-20211028124510-N.txt")
[2021-10-28T18:18:49.935Z] Verbose - Status:   Testing connectivity using Socket.Poll()...
[2021-10-28T18:18:49.936Z] Info - Command:  PWD
[2021-10-28T18:18:49.939Z] Info - Response: 257 "/GMS-EDI/GMS_Order" is current directory.
[2021-10-28T18:18:49.940Z] Info - Command:  SIZE /GMS-EDI/GMS_Order/SPISO-20211028124510-N.txt
[2021-10-28T18:18:49.941Z] Info - Response: 213 892
[2021-10-28T18:18:49.942Z] Verbose - >         DeleteFile("SPISO-20211028124510-N.txt")
[2021-10-28T18:18:49.943Z] Info - Command:  DELE SPISO-20211028124510-N.txt
[2021-10-28T18:18:49.944Z] Info - Response: 250 File deleted successfully.
[2021-10-28T18:18:49.946Z] Verbose - >         OpenWrite("SPISO-20211028124510-N.txt", Binary)
[2021-10-28T18:18:49.948Z] Info - Command:  TYPE I
[2021-10-28T18:18:49.950Z] Info - Response: 200 Type set to I
[2021-10-28T18:18:49.951Z] Verbose - >         OpenPassiveDataStream(PASV, "STOR SPISO-20211028124510-N.txt", 0)
[2021-10-28T18:18:49.954Z] Info - Command:  PASV
[2021-10-28T18:18:49.955Z] Info - Response: 227 Entering Passive Mode (127,0,0,1,244,130)
[2021-10-28T18:18:49.956Z] Info - Status:   Connecting to 127.0.0.1:62594
[2021-10-28T18:18:49.957Z] Info - Command:  STOR SPISO-20211028124510-N.txt
[2021-10-28T18:18:49.958Z] Info - Response: 150 Starting data transfer.
[2021-10-28T18:18:49.959Z] Info - Status:   FTPS Authentication Successful
[2021-10-28T18:18:49.961Z] Verbose - Status:   Time to activate encryption: 0h 0m 0s.  Total Seconds: 0.0057162.
[2021-10-28T18:18:49.962Z] Verbose - Status:   Disposing FtpSocketStream...
[2021-10-28T18:18:49.963Z] Info - Response: 425 Error while transfering data: ECONNABORTED - Connection aborted
Источник

Покажи фотку настроек БИОСа, где написано «грузиться по PXE». Само слово PXE там есть? Какие ещё слова есть кроме PXE?

pxe.jpg
pxe.jpg (38 КБ) 21903 просмотра

У хайпер-в как бы нет биоса, но тем не менее

bios.png
bios.png (24.37 КБ) 21903 просмотра

У клиентов стоят старенькие тазики, там везде по-разному написано, что-то типа LAN Boot rom enabled.
В любом случае настройки биоса на клиентах не трогались.

Маршрутизатор есть. 1шт. Тупо роутинг.
Воткнул клиента в сеть с втваре, такая же ошибка. Т.е. Роутер не причем.

попробую wireshark’ом посмотреть, что происходит.

aka писал(а): ↑

Пн дек 11, 2017 5:42 pm


А работающий лог tftpd32 покажи.

Connection received from 192.168.1.121 on port 2070 [12/12 11:22:40.251]
Read request for file <5.6.12wtware.pxe>. Mode octet [12/12 11:22:40.251]
OACK: <tsize=16282,> [12/12 11:22:40.251]
Using local port 53868 [12/12 11:22:40.251]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [12/12 11:22:40.251]
Connection received from 192.168.1.121 on port 2071 [12/12 11:22:40.267]
Read request for file <5.6.12wtware.pxe>. Mode octet [12/12 11:22:40.267]
Using local port 53870 [12/12 11:22:40.267]
<5.6.12wtware.pxe>: sent 32 blks, 16282 bytes in 0 s. 0 blk resent [12/12 11:22:40.563]
Connection received from 192.168.1.121 on port 57089 [12/12 11:22:40.595]
Read request for file <5.6.1279996ad9-0f5b-7c43-b47f-f236ead073c9>. Mode octet [12/12 11:22:40.595]
File <5.6.1279996ad9-0f5b-7c43-b47f-f236ead073c9> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57090 [12/12 11:22:40.595]
Read request for file <5.6.121-00-15-5d-e6-8c-19>. Mode octet [12/12 11:22:40.595]
File <5.6.121-00-15-5d-e6-8c-19> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57091 [12/12 11:22:40.595]
Read request for file <5.6.12C0A80179>. Mode octet [12/12 11:22:40.595]
File <5.6.12C0A80179> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57092 [12/12 11:22:40.595]
Read request for file <5.6.12C0A8017>. Mode octet [12/12 11:22:40.595]
File <5.6.12C0A8017> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57093 [12/12 11:22:40.595]
Read request for file <5.6.12C0A801>. Mode octet [12/12 11:22:40.595]
File <5.6.12C0A801> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57094 [12/12 11:22:40.595]
Read request for file <5.6.12C0A80>. Mode octet [12/12 11:22:40.595]
File <5.6.12C0A80> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57095 [12/12 11:22:40.595]
Read request for file <5.6.12C0A8>. Mode octet [12/12 11:22:40.595]
File <5.6.12C0A8> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57096 [12/12 11:22:40.595]
Read request for file <5.6.12C0A>. Mode octet [12/12 11:22:40.595]
File <5.6.12C0A> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57097 [12/12 11:22:40.595]
Read request for file <5.6.12C0>. Mode octet [12/12 11:22:40.595]
File <5.6.12C0> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57098 [12/12 11:22:40.595]
Read request for file <5.6.12C>. Mode octet [12/12 11:22:40.595]
File <5.6.12C> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:40.595]
Connection received from 192.168.1.121 on port 57099 [12/12 11:22:40.595]
Read request for file <5.6.12pxe.cfg>. Mode octet [12/12 11:22:40.610]
OACK: <tsize=182,> [12/12 11:22:40.610]
Using local port 53882 [12/12 11:22:40.610]
<5.6.12pxe.cfg>: sent 1 blk, 182 bytes in 0 s. 0 blk resent [12/12 11:22:40.610]
Connection received from 192.168.1.121 on port 57100 [12/12 11:22:40.610]
Read request for file <5.6.12packages/kernel>. Mode octet [12/12 11:22:40.610]
OACK: <tsize=2519280,> [12/12 11:22:40.610]
Using local port 53883 [12/12 11:22:40.610]
<5.6.12packageskernel>: sent 4921 blks, 2519280 bytes in 4 s. 0 blk resent [12/12 11:22:44.434]
Connection received from 192.168.1.121 on port 57101 [12/12 11:22:44.434]
Read request for file <5.6.12packages/initrd>. Mode octet [12/12 11:22:44.434]
OACK: <tsize=3444748,> [12/12 11:22:44.434]
Using local port 53884 [12/12 11:22:44.434]
<5.6.12packagesinitrd>: sent 6729 blks, 3444748 bytes in 5 s. 0 blk resent [12/12 11:22:49.688]
Connection received from 192.168.1.121 on port 59971 [12/12 11:22:52.562]
Uncorrect message [12/12 11:22:52.562]
Connection received from 192.168.1.121 on port 53472 [12/12 11:22:52.562]
Read request for file <5.6.12packageslib6>. Mode octet [12/12 11:22:52.562]
OACK: <tsize=2001023,> [12/12 11:22:52.562]
Using local port 53886 [12/12 11:22:52.562]
<5.6.12packageslib6>: sent 3909 blks, 2001023 bytes in 5 s. 1 blk resent [12/12 11:22:57.144]
Connection received from 192.168.1.121 on port 52211 [12/12 11:22:57.191]
Read request for file <Everyonesource.wtc>. Mode octet [12/12 11:22:57.191]
OACK: <tsize=2500,> [12/12 11:22:57.191]
Using local port 53887 [12/12 11:22:57.191]
<Everyonesource.wtc>: sent 5 blks, 2500 bytes in 0 s. 0 blk resent [12/12 11:22:57.191]
Connection received from 192.168.1.121 on port 43161 [12/12 11:22:57.191]
Read request for file <Everyonelist.wtc>. Mode octet [12/12 11:22:57.191]
OACK: <tsize=1322,> [12/12 11:22:57.191]
Using local port 53888 [12/12 11:22:57.191]
<Everyonelist.wtc>: sent 3 blks, 1322 bytes in 0 s. 0 blk resent [12/12 11:22:57.191]
Connection received from 192.168.1.121 on port 33744 [12/12 11:22:57.191]
Read request for file <Terminals0.15.5D.E6.8C.19config.wtc>. Mode octet [12/12 11:22:57.191]
File <Terminals0.15.5D.E6.8C.19config.wtc> : error 3 in system call CreateFile Ñèñòåìå íå óäàåòñÿ íàéòè óêàçàííûé ïóòü. [12/12 11:22:57.191]
Connection received from 192.168.1.121 on port 50112 [12/12 11:22:57.191]
Read request for file <Terminals0.15.5D.E6.8C.19.wtc>. Mode octet [12/12 11:22:57.191]
File <Terminals0.15.5D.E6.8C.19.wtc> : error 2 in system call CreateFile Íå óäàåòñÿ íàéòè óêàçàííûé ôàéë. [12/12 11:22:57.191]
Connection received from 192.168.1.121 on port 33559 [12/12 11:22:57.207]
Read request for file <Everyonedefault.wtc>. Mode octet [12/12 11:22:57.207]
OACK: <tsize=1989,> [12/12 11:22:57.207]
Using local port 53891 [12/12 11:22:57.207]
<Everyonedefault.wtc>: sent 4 blks, 1989 bytes in 0 s. 0 blk resent [12/12 11:22:57.207]
Connection received from 192.168.1.121 on port 43633 [12/12 11:22:57.207]
Read request for file <Everyoneall.wtc>. Mode octet [12/12 11:22:57.207]
OACK: <tsize=268,> [12/12 11:22:57.207]
Using local port 53892 [12/12 11:22:57.207]
<Everyoneall.wtc>: sent 1 blk, 268 bytes in 0 s. 0 blk resent [12/12 11:22:57.207]
Connection received from 192.168.1.121 on port 42486 [12/12 11:22:57.207]
Read request for file <Everyonewtware.lic>. Mode octet [12/12 11:22:57.207]
OACK: <tsize=2480,> [12/12 11:22:57.207]
Using local port 53893 [12/12 11:22:57.207]
<Everyonewtware.lic>: sent 5 blks, 2480 bytes in 0 s. 0 blk resent [12/12 11:22:57.222]

PS. Wtware крутится на windows server 2016. Приезжали обновления на сервер недавно, м.б. MS опять что-нибудь поломали.

Источник

Понравилась статья? Поделить с друзьями:
  • Netlink error no device matches name offset 24 netlink error no such device
  • Netjoin 4097 error 53
  • Netio sys синий экран windows 10 как исправить
  • Nethunter kex error
  • Netflix ошибка nw 6 403 на русском