Node js network error

Node js network error

The server should be setting the following CORS headers along with the response:

You might have to tweak the values depending on your use case, but open the Network tab in your browser, click on the request and check if your server is setting these CORS-related headers.

The headers are:

• Access-Control-Allow-Origin — which origins are allowed to make requests to the server.
• Access-Control-Allow-Methods — which HTTP methods the origins are allowed to use when making requests to the server
• Access-Control-Allow-Headers — which HTTP headers the origins are allowed to use when making requests to the server
• Access-Control-Allow-Credentials — whether to expose the server response to the frontend when the request’s credentials mode is set to include . When credentials mode is set to include , our frontend will always send user credentials (i.e. cookies, auth headers) even for CORS calls.

There is also an Access-Control-Allow-Credentials header. Setting it to true is only necessary if your browser sends user credentials with requests (e.g. cookies or the Authorization header).

When an asterisk * is set for the Access-Control-Allow-Origin header, any origin on the internet can access the server.

You would want to narrow this down in production, but it’s a useful tool when debugging.

Note that the Access-Control-Allow-Credentials header cannot be set to true if Access-Control-Allow-Origin is set to an asterisk * .

When the Access-Control-Allow-Headers is set to an asterisk, all headers are allowed in a preflight request.

Make sure that the URL you’re passing to axios is correct #

Make sure that the URL you’ve specified when making the HTTP request is correct and complete.

Источник

Axios returns a generic «Network Error» even when the request got a response code #4420

Describe the bug

When making a request to my API, the catch block has a generic «Network Error» message, but when checking in the network inspector the request got a response code 413. This causes my users to incorrectly report that ‘the website thinks i dont have a solid internet connection’. I suspect this happens for other codes too because this has been going on for a while.

To Reproduce

Make a request with a very large payload to trigger a 413 response

Expected behavior

The catch block should have the response code

Environment

• Axios Version: 0.25.0 and 0.21.2
• Adapter: xhr (i think? i dont remember changing this, so i guess whatever is default?)
• Browser: Chrome
• Browser Version: 97.0.4692.99
• Node.js Version: 14.18.1
• OS: OSX 12.1

Additional context/Screenshots

The text was updated successfully, but these errors were encountered:

We also see an increased number of Network Errors in our app. It must be iOS related, the logs shows only: iPhone, Mac, iPad (90% with iOS 14.X) devices for it.
Downgrading to 0.24.0 now to check if it fixes the error.

Edit: same issue with 0.24.0
Exception:
Error: Network Error
at apply(./node_modules/core-js/internals/wrap-error-constructor-with-cause.js:34:66)
at Error(./node_modules/core-js/modules/es.error.cause.js:28:43)
at createError(./node_modules/axios/lib/core/createError.js:16:19)
at apply(./node_modules/axios/lib/adapters/xhr.js:117:14)
at r(./node_modules/@sentry/browser/esm/helpers.js:73:23)

Edit2: the issue startet on January 21. with axios 0.21.4. We did no updates or changes at this day, so i highly suspect it is caused by an iOS update/security patch. I wasn’t able to reprocude it on our iOS test devices so far.

Same issue happens in my application. I’m waiting for more details

Same issue happens in my application too.
React Native, iOS 15.0, iPhone 12 simulator, axios 0.24.0 (tried 0.25.0 — the same issue)

Any chance you could have a look into this? I feel like this is quite important, since it makes it impossible to do proper error handling, makes it harder to debug and confuses users.

@manugch @Miodec do you have any DNS ad blockers? I disabled my AdGuard and now it works fine. Can you check any any blockers/vpn?

@manugch @Miodec do you have any DNS ad blockers? I disabled my AdGuard and now it works fine. Can you check any any blockers/vpn?

No Adblockers. I also see the error happening on visitor devices in our sentry logs, over 112 iOS devices by now who crashed with that unhandled «Network Error».
It affects only iOS devices as I said before Mac, iPhone, iPad mostly iOS/Safari 14.1.X

@manugch @Miodec do you have any DNS ad blockers? I disabled my AdGuard and now it works fine. Can you check any any blockers/vpn?

Tested without adblock — same thing.

Somewhat similar situation for my ecommerce store as well. 91% «Network Error» on Safari(iOS). Safari follows a strict «Same Origin Policy» and I have noticed that most MarTech integrations throw errors on Safari. However, for me, these 91% errors are in my app and not in with 3rd party tags/pixels.

I am seeing the exact same issue. A generic error saying Error: Network Error with no other information when getting 403s. According to the docs, the error should still include the response code and headers, but it doesn’t.

• Axios 0.21.4 & 0.26.0
• Node.js v16.13.1
• Firefox 96.0.3 & Chrome 98.0.4758.82
• Windows 10 Pro (Build 19041)

I had a similar problem. I realized that was a CORS problem. Do you have any OPTIONS call before the actual API call?

@pierroberto I see this error for API calls which are on same domain, relative paths like /api/getsomedata .

Looking at the code, there seems to be a catch all in the XHR adapters https://github.com/axios/axios/blob/master/lib/adapters/xhr.js#L118

It’s not there in the HTTP adapter which will give the correct error so you may want to switch to that

I think it’s because the XHR spec doesn’t give any clue about the error, so I don’t think it can be fixed. As your then dependant on the browser implementation to trigger the .onError only if HTTP code = 0, and it seems some will trigger this with codes in the 400 range

I think it’s because the XHR spec doesn’t give any clue about the error, so I don’t think it can be fixed.

So, why does the console correctly show errors like ERR_FAILED 413 in this case, or CONNECTION_REFUSED or SSL_CERT_DATE_INVALID that I ran into in other cases? All of them give Network Error , but somehow show up correctly in the console.

Pretty sure using HTTP is not the best solution as its not supported in every browser (webpack replaces it with xhr)

EDIT: Right.. Im assuming its related to the // Real errors are hidden from us by the browser comment.

Alright, I figured things out (im still learning so some details could be wrong)

Basically, there is no way around it. Axios is just a wrapper for XMLHttpRequest (just realised that’s where the XHR acronym comes from) to make it a bit easier to use and less complicated to write. Axios gives us a Network Error because xhr itself doesn’t give us any info about the error. You can see for yourself by doing a simple request to an endpoint that doesn’t exist:

The console.log will give us (drumroll please):

Absolutely nothing 🙂

However, the console error will show GET http://localhost:5005/ net::ERR_CONNECTION_REFUSED (still don’t understand why the error is in the console but not in the event listener parameter)

So either way, this is not the fault of Axios. The only fix here that was mentioned by @Tofandel is to switch to the HTTP adapter at the expense of some compatibility — I don’t know how big this expense is exactly. Axios uses Node’s HTTPS module in its HTTP adapter and I’m not sure yet what things like webpack will replace it with. If I remember ill update this comment with my further findings.

Источник

Node.js v19.4.0 documentation

Errors #

Applications running in Node.js will generally experience four categories of errors:

• Standard JavaScript errors such as , , , , , and .
• System errors triggered by underlying operating system constraints such as attempting to open a file that does not exist or attempting to send data over a closed socket.
• User-specified errors triggered by application code.
• AssertionError s are a special class of error that can be triggered when Node.js detects an exceptional logic violation that should never occur. These are raised typically by the node:assert module.

All JavaScript and system errors raised by Node.js inherit from, or are instances of, the standard JavaScript class and are guaranteed to provide at least the properties available on that class.

Error propagation and interception #

Node.js supports several mechanisms for propagating and handling errors that occur while an application is running. How these errors are reported and handled depends entirely on the type of Error and the style of the API that is called.

All JavaScript errors are handled as exceptions that immediately generate and throw an error using the standard JavaScript throw mechanism. These are handled using the try…catch construct provided by the JavaScript language.

Any use of the JavaScript throw mechanism will raise an exception that must be handled using try…catch or the Node.js process will exit immediately.

With few exceptions, Synchronous APIs (any blocking method that does not accept a callback function, such as fs.readFileSync ), will use throw to report errors.

Errors that occur within Asynchronous APIs may be reported in multiple ways:

Most asynchronous methods that accept a callback function will accept an Error object passed as the first argument to that function. If that first argument is not null and is an instance of Error , then an error occurred that should be handled.

When an asynchronous method is called on an object that is an EventEmitter , errors can be routed to that object’s ‘error’ event.

A handful of typically asynchronous methods in the Node.js API may still use the throw mechanism to raise exceptions that must be handled using try…catch . There is no comprehensive list of such methods; please refer to the documentation of each method to determine the appropriate error handling mechanism required.

The use of the ‘error’ event mechanism is most common for stream-based and event emitter-based APIs, which themselves represent a series of asynchronous operations over time (as opposed to a single operation that may pass or fail).

For all EventEmitter objects, if an ‘error’ event handler is not provided, the error will be thrown, causing the Node.js process to report an uncaught exception and crash unless either: The domain module is used appropriately or a handler has been registered for the ‘uncaughtException’ event.

Errors generated in this way cannot be intercepted using try…catch as they are thrown after the calling code has already exited.

Developers must refer to the documentation for each method to determine exactly how errors raised by those methods are propagated.

Error-first callbacks #

Most asynchronous methods exposed by the Node.js core API follow an idiomatic pattern referred to as an error-first callback. With this pattern, a callback function is passed to the method as an argument. When the operation either completes or an error is raised, the callback function is called with the Error object (if any) passed as the first argument. If no error was raised, the first argument will be passed as null .

The JavaScript try…catch mechanism cannot be used to intercept errors generated by asynchronous APIs. A common mistake for beginners is to try to use throw inside an error-first callback:

This will not work because the callback function passed to fs.readFile() is called asynchronously. By the time the callback has been called, the surrounding code, including the try…catch block, will have already exited. Throwing an error inside the callback can crash the Node.js process in most cases. If domains are enabled, or a handler has been registered with process.on(‘uncaughtException’) , such errors can be intercepted.

Class: Error #

A generic JavaScript object that does not denote any specific circumstance of why the error occurred. Error objects capture a «stack trace» detailing the point in the code at which the Error was instantiated, and may provide a text description of the error.

All errors generated by Node.js, including all system and JavaScript errors, will either be instances of, or inherit from, the Error class.

new Error(message[, options]) #

Creates a new Error object and sets the error.message property to the provided text message. If an object is passed as message , the text message is generated by calling String(message) . If the cause option is provided, it is assigned to the error.cause property. The error.stack property will represent the point in the code at which new Error() was called. Stack traces are dependent on V8’s stack trace API. Stack traces extend only to either (a) the beginning of synchronous code execution, or (b) the number of frames given by the property Error.stackTraceLimit , whichever is smaller.

Error.captureStackTrace(targetObject[, constructorOpt]) #

Creates a .stack property on targetObject , which when accessed returns a string representing the location in the code at which Error.captureStackTrace() was called.

The first line of the trace will be prefixed with $: $ .

The optional constructorOpt argument accepts a function. If given, all frames above constructorOpt , including constructorOpt , will be omitted from the generated stack trace.

The constructorOpt argument is useful for hiding implementation details of error generation from the user. For instance:

Error.stackTraceLimit #

The Error.stackTraceLimit property specifies the number of stack frames collected by a stack trace (whether generated by new Error().stack or Error.captureStackTrace(obj) ).

The default value is 10 but may be set to any valid JavaScript number. Changes will affect any stack trace captured after the value has been changed.

If set to a non-number value, or set to a negative number, stack traces will not capture any frames.

error.cause #

If present, the error.cause property is the underlying cause of the Error . It is used when catching an error and throwing a new one with a different message or code in order to still have access to the original error.

The error.cause property is typically set by calling new Error(message, < cause >) . It is not set by the constructor if the cause option is not provided.

This property allows errors to be chained. When serializing Error objects, util.inspect() recursively serializes error.cause if it is set.

error.code #

The error.code property is a string label that identifies the kind of error. error.code is the most stable way to identify an error. It will only change between major versions of Node.js. In contrast, error.message strings may change between any versions of Node.js. See Node.js error codes for details about specific codes.

error.message #

The error.message property is the string description of the error as set by calling new Error(message) . The message passed to the constructor will also appear in the first line of the stack trace of the Error , however changing this property after the Error object is created may not change the first line of the stack trace (for example, when error.stack is read before this property is changed).

error.stack #

The error.stack property is a string describing the point in the code at which the Error was instantiated.

The first line is formatted as : , and is followed by a series of stack frames (each line beginning with «at «). Each frame describes a call site within the code that lead to the error being generated. V8 attempts to display a name for each function (by variable name, function name, or object method name), but occasionally it will not be able to find a suitable name. If V8 cannot determine a name for the function, only location information will be displayed for that frame. Otherwise, the determined function name will be displayed with location information appended in parentheses.

Frames are only generated for JavaScript functions. If, for example, execution synchronously passes through a C++ addon function called cheetahify which itself calls a JavaScript function, the frame representing the cheetahify call will not be present in the stack traces:

The location information will be one of:

• native , if the frame represents a call internal to V8 (as in [].forEach ).
• plain-filename.js:line:column , if the frame represents a call internal to Node.js.
• /absolute/path/to/file.js:line:column , if the frame represents a call in a user program (using CommonJS module system), or its dependencies.
• :///url/to/module/file.mjs:line:column , if the frame represents a call in a user program (using ES module system), or its dependencies.

The string representing the stack trace is lazily generated when the error.stack property is accessed.

The number of frames captured by the stack trace is bounded by the smaller of Error.stackTraceLimit or the number of available frames on the current event loop tick.

Class: AssertionError #

Indicates the failure of an assertion. For details, see Class: assert.AssertionError .

Class: RangeError #

Indicates that a provided argument was not within the set or range of acceptable values for a function; whether that is a numeric range, or outside the set of options for a given function parameter.

Node.js will generate and throw RangeError instances immediately as a form of argument validation.

Class: ReferenceError #

Indicates that an attempt is being made to access a variable that is not defined. Such errors commonly indicate typos in code, or an otherwise broken program.

While client code may generate and propagate these errors, in practice, only V8 will do so.

Unless an application is dynamically generating and running code, ReferenceError instances indicate a bug in the code or its dependencies.

Class: SyntaxError #

Indicates that a program is not valid JavaScript. These errors may only be generated and propagated as a result of code evaluation. Code evaluation may happen as a result of eval , Function , require , or vm. These errors are almost always indicative of a broken program.

SyntaxError instances are unrecoverable in the context that created them – they may only be caught by other contexts.

Class: SystemError #

Node.js generates system errors when exceptions occur within its runtime environment. These usually occur when an application violates an operating system constraint. For example, a system error will occur if an application attempts to read a file that does not exist.

• address If present, the address to which a network connection failed
• code The string error code
• dest If present, the file path destination when reporting a file system error
• errno The system-provided error number
• info If present, extra details about the error condition
• message A system-provided human-readable description of the error
• path If present, the file path when reporting a file system error
• port If present, the network connection port that is not available
• syscall The name of the system call that triggered the error

error.address #

If present, error.address is a string describing the address to which a network connection failed.

error.code #

The error.code property is a string representing the error code.

error.dest #

If present, error.dest is the file path destination when reporting a file system error.

error.errno #

The error.errno property is a negative number which corresponds to the error code defined in libuv Error handling .

On Windows the error number provided by the system will be normalized by libuv.

To get the string representation of the error code, use util.getSystemErrorName(error.errno) .

error.info #

If present, error.info is an object with details about the error condition.

error.message #

error.message is a system-provided human-readable description of the error.

error.path #

If present, error.path is a string containing a relevant invalid pathname.

error.port #

If present, error.port is the network connection port that is not available.

error.syscall #

The error.syscall property is a string describing the syscall that failed.

Common system errors #

This is a list of system errors commonly-encountered when writing a Node.js program. For a comprehensive list, see the errno (3) man page.

EACCES (Permission denied): An attempt was made to access a file in a way forbidden by its file access permissions.

EADDRINUSE (Address already in use): An attempt to bind a server ( net , http , or https ) to a local address failed due to another server on the local system already occupying that address.

ECONNREFUSED (Connection refused): No connection could be made because the target machine actively refused it. This usually results from trying to connect to a service that is inactive on the foreign host.

ECONNRESET (Connection reset by peer): A connection was forcibly closed by a peer. This normally results from a loss of the connection on the remote socket due to a timeout or reboot. Commonly encountered via the http and net modules.

EEXIST (File exists): An existing file was the target of an operation that required that the target not exist.

EISDIR (Is a directory): An operation expected a file, but the given pathname was a directory.

EMFILE (Too many open files in system): Maximum number of file descriptors allowable on the system has been reached, and requests for another descriptor cannot be fulfilled until at least one has been closed. This is encountered when opening many files at once in parallel, especially on systems (in particular, macOS) where there is a low file descriptor limit for processes. To remedy a low limit, run ulimit -n 2048 in the same shell that will run the Node.js process.

ENOENT (No such file or directory): Commonly raised by fs operations to indicate that a component of the specified pathname does not exist. No entity (file or directory) could be found by the given path.

ENOTDIR (Not a directory): A component of the given pathname existed, but was not a directory as expected. Commonly raised by fs.readdir .

ENOTEMPTY (Directory not empty): A directory with entries was the target of an operation that requires an empty directory, usually fs.unlink .

ENOTFOUND (DNS lookup failed): Indicates a DNS failure of either EAI_NODATA or EAI_NONAME . This is not a standard POSIX error.

EPERM (Operation not permitted): An attempt was made to perform an operation that requires elevated privileges.

EPIPE (Broken pipe): A write on a pipe, socket, or FIFO for which there is no process to read the data. Commonly encountered at the net and http layers, indicative that the remote side of the stream being written to has been closed.

ETIMEDOUT (Operation timed out): A connect or send request failed because the connected party did not properly respond after a period of time. Usually encountered by http or net . Often a sign that a socket.end() was not properly called.

Class: TypeError #

Indicates that a provided argument is not an allowable type. For example, passing a function to a parameter which expects a string would be a TypeError .

Node.js will generate and throw TypeError instances immediately as a form of argument validation.

Exceptions vs. errors #

A JavaScript exception is a value that is thrown as a result of an invalid operation or as the target of a throw statement. While it is not required that these values are instances of Error or classes which inherit from Error , all exceptions thrown by Node.js or the JavaScript runtime will be instances of Error .

Some exceptions are unrecoverable at the JavaScript layer. Such exceptions will always cause the Node.js process to crash. Examples include assert() checks or abort() calls in the C++ layer.

OpenSSL errors #

Errors originating in crypto or tls are of class Error , and in addition to the standard .code and .message properties, may have some additional OpenSSL-specific properties.

error.opensslErrorStack #

An array of errors that can give context to where in the OpenSSL library an error originates from.

error.function #

The OpenSSL function the error originates in.

error.library #

The OpenSSL library the error originates in.

error.reason #

A human-readable string describing the reason for the error.

Node.js error codes #

ABORT_ERR #

Used when an operation has been aborted (typically using an AbortController ).

APIs not using AbortSignal s typically do not raise an error with this code.

This code does not use the regular ERR_* convention Node.js errors use in order to be compatible with the web platform’s AbortError .

ERR_AMBIGUOUS_ARGUMENT #

A function argument is being used in a way that suggests that the function signature may be misunderstood. This is thrown by the node:assert module when the message parameter in assert.throws(block, message) matches the error message thrown by block because that usage suggests that the user believes message is the expected message rather than the message the AssertionError will display if block does not throw.

ERR_ARG_NOT_ITERABLE #

An iterable argument (i.e. a value that works with for. of loops) was required, but not provided to a Node.js API.

ERR_ASSERTION #

A special type of error that can be triggered whenever Node.js detects an exceptional logic violation that should never occur. These are raised typically by the node:assert module.

ERR_ASSERT_SNAPSHOT_NOT_SUPPORTED #

An attempt was made to use assert.snapshot() in an environment that does not support snapshots, such as the REPL, or when using node —eval .

ERR_ASYNC_CALLBACK #

An attempt was made to register something that is not a function as an AsyncHooks callback.

ERR_ASYNC_TYPE #

The type of an asynchronous resource was invalid. Users are also able to define their own types if using the public embedder API.

ERR_BROTLI_COMPRESSION_FAILED #

Data passed to a Brotli stream was not successfully compressed.

ERR_BROTLI_INVALID_PARAM #

An invalid parameter key was passed during construction of a Brotli stream.

ERR_BUFFER_CONTEXT_NOT_AVAILABLE #

An attempt was made to create a Node.js Buffer instance from addon or embedder code, while in a JS engine Context that is not associated with a Node.js instance. The data passed to the Buffer method will have been released by the time the method returns.

When encountering this error, a possible alternative to creating a Buffer instance is to create a normal Uint8Array , which only differs in the prototype of the resulting object. Uint8Array s are generally accepted in all Node.js core APIs where Buffer s are; they are available in all Contexts.

ERR_BUFFER_OUT_OF_BOUNDS #

An operation outside the bounds of a Buffer was attempted.

ERR_BUFFER_TOO_LARGE #

An attempt has been made to create a Buffer larger than the maximum allowed size.

ERR_CANNOT_WATCH_SIGINT #

Node.js was unable to watch for the SIGINT signal.

ERR_CHILD_CLOSED_BEFORE_REPLY #

A child process was closed before the parent received a reply.

ERR_CHILD_PROCESS_IPC_REQUIRED #

Used when a child process is being forked without specifying an IPC channel.

ERR_CHILD_PROCESS_STDIO_MAXBUFFER #

Used when the main process is trying to read data from the child process’s STDERR/STDOUT, and the data’s length is longer than the maxBuffer option.

ERR_CLOSED_MESSAGE_PORT #

There was an attempt to use a MessagePort instance in a closed state, usually after .close() has been called.

ERR_CONSOLE_WRITABLE_STREAM #

Console was instantiated without stdout stream, or Console has a non-writable stdout or stderr stream.

ERR_CONSTRUCT_CALL_INVALID #

A class constructor was called that is not callable.

ERR_CONSTRUCT_CALL_REQUIRED #

A constructor for a class was called without new .

ERR_CONTEXT_NOT_INITIALIZED #

The vm context passed into the API is not yet initialized. This could happen when an error occurs (and is caught) during the creation of the context, for example, when the allocation fails or the maximum call stack size is reached when the context is created.

ERR_CRYPTO_CUSTOM_ENGINE_NOT_SUPPORTED #

A client certificate engine was requested that is not supported by the version of OpenSSL being used.

ERR_CRYPTO_ECDH_INVALID_FORMAT #

An invalid value for the format argument was passed to the crypto.ECDH() class getPublicKey() method.

ERR_CRYPTO_ECDH_INVALID_PUBLIC_KEY #

An invalid value for the key argument has been passed to the crypto.ECDH() class computeSecret() method. It means that the public key lies outside of the elliptic curve.

ERR_CRYPTO_ENGINE_UNKNOWN #

An invalid crypto engine identifier was passed to require(‘node:crypto’).setEngine() .

ERR_CRYPTO_FIPS_FORCED #

The —force-fips command-line argument was used but there was an attempt to enable or disable FIPS mode in the node:crypto module.

ERR_CRYPTO_FIPS_UNAVAILABLE #

An attempt was made to enable or disable FIPS mode, but FIPS mode was not available.

ERR_CRYPTO_HASH_FINALIZED #

hash.digest() was called multiple times. The hash.digest() method must be called no more than one time per instance of a Hash object.

ERR_CRYPTO_HASH_UPDATE_FAILED #

hash.update() failed for any reason. This should rarely, if ever, happen.

ERR_CRYPTO_INCOMPATIBLE_KEY #

The given crypto keys are incompatible with the attempted operation.

ERR_CRYPTO_INCOMPATIBLE_KEY_OPTIONS #

The selected public or private key encoding is incompatible with other options.

ERR_CRYPTO_INITIALIZATION_FAILED #

Initialization of the crypto subsystem failed.

ERR_CRYPTO_INVALID_AUTH_TAG #

An invalid authentication tag was provided.

ERR_CRYPTO_INVALID_COUNTER #

An invalid counter was provided for a counter-mode cipher.

ERR_CRYPTO_INVALID_CURVE #

An invalid elliptic-curve was provided.

ERR_CRYPTO_INVALID_DIGEST #

An invalid crypto digest algorithm was specified.

ERR_CRYPTO_INVALID_IV #

An invalid initialization vector was provided.

ERR_CRYPTO_INVALID_JWK #

An invalid JSON Web Key was provided.

ERR_CRYPTO_INVALID_KEY_OBJECT_TYPE #

The given crypto key object’s type is invalid for the attempted operation.

ERR_CRYPTO_INVALID_KEYLEN #

An invalid key length was provided.

ERR_CRYPTO_INVALID_KEYPAIR #

An invalid key pair was provided.

ERR_CRYPTO_INVALID_KEYTYPE #

An invalid key type was provided.

ERR_CRYPTO_INVALID_MESSAGELEN #

An invalid message length was provided.

ERR_CRYPTO_INVALID_SCRYPT_PARAMS #

Invalid scrypt algorithm parameters were provided.

ERR_CRYPTO_INVALID_STATE #

A crypto method was used on an object that was in an invalid state. For instance, calling cipher.getAuthTag() before calling cipher.final() .

ERR_CRYPTO_INVALID_TAG_LENGTH #

An invalid authentication tag length was provided.

ERR_CRYPTO_JOB_INIT_FAILED #

Initialization of an asynchronous crypto operation failed.

ERR_CRYPTO_JWK_UNSUPPORTED_CURVE #

Key’s Elliptic Curve is not registered for use in the JSON Web Key Elliptic Curve Registry.

ERR_CRYPTO_JWK_UNSUPPORTED_KEY_TYPE #

Key’s Asymmetric Key Type is not registered for use in the JSON Web Key Types Registry.

ERR_CRYPTO_OPERATION_FAILED #

A crypto operation failed for an otherwise unspecified reason.

ERR_CRYPTO_PBKDF2_ERROR #

The PBKDF2 algorithm failed for unspecified reasons. OpenSSL does not provide more details and therefore neither does Node.js.

ERR_CRYPTO_SCRYPT_INVALID_PARAMETER #

One or more crypto.scrypt() or crypto.scryptSync() parameters are outside their legal range.

ERR_CRYPTO_SCRYPT_NOT_SUPPORTED #

Node.js was compiled without scrypt support. Not possible with the official release binaries but can happen with custom builds, including distro builds.

ERR_CRYPTO_SIGN_KEY_REQUIRED #

A signing key was not provided to the sign.sign() method.

ERR_CRYPTO_TIMING_SAFE_EQUAL_LENGTH #

crypto.timingSafeEqual() was called with Buffer , TypedArray , or DataView arguments of different lengths.

ERR_CRYPTO_UNKNOWN_CIPHER #

An unknown cipher was specified.

ERR_CRYPTO_UNKNOWN_DH_GROUP #

An unknown Diffie-Hellman group name was given. See crypto.getDiffieHellman() for a list of valid group names.

ERR_CRYPTO_UNSUPPORTED_OPERATION #

An attempt to invoke an unsupported crypto operation was made.

ERR_DEBUGGER_ERROR #

An error occurred with the debugger.

ERR_DEBUGGER_STARTUP_ERROR #

The debugger timed out waiting for the required host/port to be free.

ERR_DLOPEN_DISABLED #

Loading native addons has been disabled using —no-addons .

ERR_DLOPEN_FAILED #

A call to process.dlopen() failed.

ERR_DIR_CLOSED #

The fs.Dir was previously closed.

ERR_DIR_CONCURRENT_OPERATION #

A synchronous read or close call was attempted on an fs.Dir which has ongoing asynchronous operations.

ERR_DNS_SET_SERVERS_FAILED #

c-ares failed to set the DNS server.

ERR_DOMAIN_CALLBACK_NOT_AVAILABLE #

The node:domain module was not usable since it could not establish the required error handling hooks, because process.setUncaughtExceptionCaptureCallback() had been called at an earlier point in time.

ERR_DOMAIN_CANNOT_SET_UNCAUGHT_EXCEPTION_CAPTURE #

process.setUncaughtExceptionCaptureCallback() could not be called because the node:domain module has been loaded at an earlier point in time.

The stack trace is extended to include the point in time at which the node:domain module had been loaded.

ERR_DUPLICATE_STARTUP_SNAPSHOT_MAIN_FUNCTION #

v8.startupSnapshot.setDeserializeMainFunction() could not be called because it had already been called before.

ERR_ENCODING_INVALID_ENCODED_DATA #

Data provided to TextDecoder() API was invalid according to the encoding provided.

ERR_ENCODING_NOT_SUPPORTED #

Encoding provided to TextDecoder() API was not one of the WHATWG Supported Encodings.

ERR_EVAL_ESM_CANNOT_PRINT #

—print cannot be used with ESM input.

ERR_EVENT_RECURSION #

Thrown when an attempt is made to recursively dispatch an event on EventTarget .

ERR_EXECUTION_ENVIRONMENT_NOT_AVAILABLE #

The JS execution context is not associated with a Node.js environment. This may occur when Node.js is used as an embedded library and some hooks for the JS engine are not set up properly.

ERR_FALSY_VALUE_REJECTION #

A Promise that was callbackified via util.callbackify() was rejected with a falsy value.

ERR_FEATURE_UNAVAILABLE_ON_PLATFORM #

Used when a feature that is not available to the current platform which is running Node.js is used.

ERR_FS_CP_DIR_TO_NON_DIR #

An attempt was made to copy a directory to a non-directory (file, symlink, etc.) using fs.cp() .

ERR_FS_CP_EEXIST #

An attempt was made to copy over a file that already existed with fs.cp() , with the force and errorOnExist set to true .

ERR_FS_CP_EINVAL #

When using fs.cp() , src or dest pointed to an invalid path.

ERR_HTTP_CONTENT_LENGTH_MISMATCH #

Response body size doesn’t match with the specified content-length header value.

ERR_FS_CP_FIFO_PIPE #

An attempt was made to copy a named pipe with fs.cp() .

ERR_FS_CP_NON_DIR_TO_DIR #

An attempt was made to copy a non-directory (file, symlink, etc.) to a directory using fs.cp() .

ERR_FS_CP_SOCKET #

An attempt was made to copy to a socket with fs.cp() .

ERR_FS_CP_SYMLINK_TO_SUBDIRECTORY #

When using fs.cp() , a symlink in dest pointed to a subdirectory of src .

ERR_FS_CP_UNKNOWN #

An attempt was made to copy to an unknown file type with fs.cp() .

ERR_FS_EISDIR #

Path is a directory.

ERR_FS_FILE_TOO_LARGE #

An attempt has been made to read a file whose size is larger than the maximum allowed size for a Buffer .

ERR_FS_INVALID_SYMLINK_TYPE #

An invalid symlink type was passed to the fs.symlink() or fs.symlinkSync() methods.

An attempt was made to add more headers after the headers had already been sent.

An invalid HTTP header value was specified.

ERR_HTTP_INVALID_STATUS_CODE #

Status code was outside the regular status code range (100-999).

ERR_HTTP_REQUEST_TIMEOUT #

The client has not sent the entire request within the allowed time.

ERR_HTTP_SOCKET_ENCODING #

Changing the socket encoding is not allowed per RFC 7230 Section 3.

ERR_HTTP_TRAILER_INVALID #

The Trailer header was set even though the transfer encoding does not support that.

ERR_HTTP2_ALTSVC_INVALID_ORIGIN #

HTTP/2 ALTSVC frames require a valid origin.

ERR_HTTP2_ALTSVC_LENGTH #

HTTP/2 ALTSVC frames are limited to a maximum of 16,382 payload bytes.

For HTTP/2 requests using the CONNECT method, the :authority pseudo-header is required.

ERR_HTTP2_CONNECT_PATH #

For HTTP/2 requests using the CONNECT method, the :path pseudo-header is forbidden.

ERR_HTTP2_CONNECT_SCHEME #

For HTTP/2 requests using the CONNECT method, the :scheme pseudo-header is forbidden.

ERR_HTTP2_ERROR #

A non-specific HTTP/2 error has occurred.

ERR_HTTP2_GOAWAY_SESSION #

New HTTP/2 Streams may not be opened after the Http2Session has received a GOAWAY frame from the connected peer.

Multiple values were provided for an HTTP/2 header field that was required to have only a single value.

An additional headers was specified after an HTTP/2 response was initiated.

An attempt was made to send multiple response headers.

ERR_HTTP2_INFO_STATUS_NOT_ALLOWED #

Informational HTTP status codes ( 1xx ) may not be set as the response status code on HTTP/2 responses.

HTTP/1 connection specific headers are forbidden to be used in HTTP/2 requests and responses.

An invalid HTTP/2 header value was specified.

ERR_HTTP2_INVALID_INFO_STATUS #

An invalid HTTP informational status code has been specified. Informational status codes must be an integer between 100 and 199 (inclusive).

ERR_HTTP2_INVALID_ORIGIN #

HTTP/2 ORIGIN frames require a valid origin.

ERR_HTTP2_INVALID_PACKED_SETTINGS_LENGTH #

Input Buffer and Uint8Array instances passed to the http2.getUnpackedSettings() API must have a length that is a multiple of six.

Only valid HTTP/2 pseudoheaders ( :status , :path , :authority , :scheme , and :method ) may be used.

ERR_HTTP2_INVALID_SESSION #

An action was performed on an Http2Session object that had already been destroyed.

ERR_HTTP2_INVALID_SETTING_VALUE #

An invalid value has been specified for an HTTP/2 setting.

ERR_HTTP2_INVALID_STREAM #

An operation was performed on a stream that had already been destroyed.

ERR_HTTP2_MAX_PENDING_SETTINGS_ACK #

Whenever an HTTP/2 SETTINGS frame is sent to a connected peer, the peer is required to send an acknowledgment that it has received and applied the new SETTINGS . By default, a maximum number of unacknowledged SETTINGS frames may be sent at any given time. This error code is used when that limit has been reached.

ERR_HTTP2_NESTED_PUSH #

An attempt was made to initiate a new push stream from within a push stream. Nested push streams are not permitted.

ERR_HTTP2_NO_MEM #

Out of memory when using the http2session.setLocalWindowSize(windowSize) API.

ERR_HTTP2_NO_SOCKET_MANIPULATION #

An attempt was made to directly manipulate (read, write, pause, resume, etc.) a socket attached to an Http2Session .

ERR_HTTP2_ORIGIN_LENGTH #

HTTP/2 ORIGIN frames are limited to a length of 16382 bytes.

ERR_HTTP2_OUT_OF_STREAMS #

The number of streams created on a single HTTP/2 session reached the maximum limit.

ERR_HTTP2_PAYLOAD_FORBIDDEN #

A message payload was specified for an HTTP response code for which a payload is forbidden.

ERR_HTTP2_PING_CANCEL #

An HTTP/2 ping was canceled.

ERR_HTTP2_PING_LENGTH #

HTTP/2 ping payloads must be exactly 8 bytes in length.

An HTTP/2 pseudo-header has been used inappropriately. Pseudo-headers are header key names that begin with the : prefix.

ERR_HTTP2_PUSH_DISABLED #

An attempt was made to create a push stream, which had been disabled by the client.

ERR_HTTP2_SEND_FILE #

An attempt was made to use the Http2Stream.prototype.responseWithFile() API to send a directory.

ERR_HTTP2_SEND_FILE_NOSEEK #

An attempt was made to use the Http2Stream.prototype.responseWithFile() API to send something other than a regular file, but offset or length options were provided.

ERR_HTTP2_SESSION_ERROR #

The Http2Session closed with a non-zero error code.

ERR_HTTP2_SETTINGS_CANCEL #

The Http2Session settings canceled.

ERR_HTTP2_SOCKET_BOUND #

An attempt was made to connect a Http2Session object to a net.Socket or tls.TLSSocket that had already been bound to another Http2Session object.

ERR_HTTP2_SOCKET_UNBOUND #

An attempt was made to use the socket property of an Http2Session that has already been closed.

ERR_HTTP2_STATUS_101 #

Use of the 101 Informational status code is forbidden in HTTP/2.

ERR_HTTP2_STATUS_INVALID #

An invalid HTTP status code has been specified. Status codes must be an integer between 100 and 599 (inclusive).

ERR_HTTP2_STREAM_CANCEL #

An Http2Stream was destroyed before any data was transmitted to the connected peer.

ERR_HTTP2_STREAM_ERROR #

A non-zero error code was been specified in an RST_STREAM frame.

ERR_HTTP2_STREAM_SELF_DEPENDENCY #

When setting the priority for an HTTP/2 stream, the stream may be marked as a dependency for a parent stream. This error code is used when an attempt is made to mark a stream and dependent of itself.

ERR_HTTP2_TOO_MANY_INVALID_FRAMES #

The limit of acceptable invalid HTTP/2 protocol frames sent by the peer, as specified through the maxSessionInvalidFrames option, has been exceeded.

ERR_HTTP2_TRAILERS_ALREADY_SENT #

Trailing headers have already been sent on the Http2Stream .

ERR_HTTP2_TRAILERS_NOT_READY #

The http2stream.sendTrailers() method cannot be called until after the ‘wantTrailers’ event is emitted on an Http2Stream object. The ‘wantTrailers’ event will only be emitted if the waitForTrailers option is set for the Http2Stream .

ERR_HTTP2_UNSUPPORTED_PROTOCOL #

http2.connect() was passed a URL that uses any protocol other than http: or https: .

ERR_ILLEGAL_CONSTRUCTOR #

An attempt was made to construct an object using a non-public constructor.

ERR_IMPORT_ASSERTION_TYPE_FAILED #

An import assertion has failed, preventing the specified module to be imported.

ERR_IMPORT_ASSERTION_TYPE_MISSING #

An import assertion is missing, preventing the specified module to be imported.

ERR_IMPORT_ASSERTION_TYPE_UNSUPPORTED #

An import assertion is not supported by this version of Node.js.

ERR_INCOMPATIBLE_OPTION_PAIR #

An option pair is incompatible with each other and cannot be used at the same time.

ERR_INPUT_TYPE_NOT_ALLOWED #

The —input-type flag was used to attempt to execute a file. This flag can only be used with input via —eval , —print , or STDIN .

ERR_INSPECTOR_ALREADY_ACTIVATED #

While using the node:inspector module, an attempt was made to activate the inspector when it already started to listen on a port. Use inspector.close() before activating it on a different address.

ERR_INSPECTOR_ALREADY_CONNECTED #

While using the node:inspector module, an attempt was made to connect when the inspector was already connected.

ERR_INSPECTOR_CLOSED #

While using the node:inspector module, an attempt was made to use the inspector after the session had already closed.

ERR_INSPECTOR_COMMAND #

An error occurred while issuing a command via the node:inspector module.

ERR_INSPECTOR_NOT_ACTIVE #

The inspector is not active when inspector.waitForDebugger() is called.

ERR_INSPECTOR_NOT_AVAILABLE #

The node:inspector module is not available for use.

ERR_INSPECTOR_NOT_CONNECTED #

While using the node:inspector module, an attempt was made to use the inspector before it was connected.

ERR_INSPECTOR_NOT_WORKER #

An API was called on the main thread that can only be used from the worker thread.

ERR_INTERNAL_ASSERTION #

There was a bug in Node.js or incorrect usage of Node.js internals. To fix the error, open an issue at https://github.com/nodejs/node/issues.

ERR_INVALID_ADDRESS_FAMILY #

The provided address family is not understood by the Node.js API.

ERR_INVALID_ARG_TYPE #

An argument of the wrong type was passed to a Node.js API.

ERR_INVALID_ARG_VALUE #

An invalid or unsupported value was passed for a given argument.

ERR_INVALID_ASYNC_ID #

An invalid asyncId or triggerAsyncId was passed using AsyncHooks . An id less than -1 should never happen.

ERR_INVALID_BUFFER_SIZE #

A swap was performed on a Buffer but its size was not compatible with the operation.

ERR_INVALID_CHAR #

Invalid characters were detected in headers.

ERR_INVALID_CURSOR_POS #

A cursor on a given stream cannot be moved to a specified row without a specified column.

ERR_INVALID_FD #

A file descriptor (‘fd’) was not valid (e.g. it was a negative value).

ERR_INVALID_FD_TYPE #

A file descriptor (‘fd’) type was not valid.

ERR_INVALID_FILE_URL_HOST #

A Node.js API that consumes file: URLs (such as certain functions in the fs module) encountered a file URL with an incompatible host. This situation can only occur on Unix-like systems where only localhost or an empty host is supported.

ERR_INVALID_FILE_URL_PATH #

A Node.js API that consumes file: URLs (such as certain functions in the fs module) encountered a file URL with an incompatible path. The exact semantics for determining whether a path can be used is platform-dependent.

ERR_INVALID_HANDLE_TYPE #

An attempt was made to send an unsupported «handle» over an IPC communication channel to a child process. See subprocess.send() and process.send() for more information.

ERR_INVALID_HTTP_TOKEN #

An invalid HTTP token was supplied.

ERR_INVALID_IP_ADDRESS #

An IP address is not valid.

ERR_INVALID_MIME_SYNTAX #

The syntax of a MIME is not valid.

ERR_INVALID_MODULE #

An attempt was made to load a module that does not exist or was otherwise not valid.

ERR_INVALID_MODULE_SPECIFIER #

The imported module string is an invalid URL, package name, or package subpath specifier.

ERR_INVALID_OBJECT_DEFINE_PROPERTY #

An error occurred while setting an invalid attribute on the property of an object.

ERR_INVALID_PACKAGE_CONFIG #

An invalid package.json file failed parsing.

ERR_INVALID_PACKAGE_TARGET #

The package.json «exports» field contains an invalid target mapping value for the attempted module resolution.

ERR_INVALID_PERFORMANCE_MARK #

While using the Performance Timing API ( perf_hooks ), a performance mark is invalid.

ERR_INVALID_PROTOCOL #

An invalid options.protocol was passed to http.request() .

ERR_INVALID_REPL_EVAL_CONFIG #

Both breakEvalOnSigint and eval options were set in the REPL config, which is not supported.

ERR_INVALID_REPL_INPUT #

The input may not be used in the REPL . The conditions under which this error is used are described in the REPL documentation.

ERR_INVALID_RETURN_PROPERTY #

Thrown in case a function option does not provide a valid value for one of its returned object properties on execution.

ERR_INVALID_RETURN_PROPERTY_VALUE #

Thrown in case a function option does not provide an expected value type for one of its returned object properties on execution.

ERR_INVALID_RETURN_VALUE #

Thrown in case a function option does not return an expected value type on execution, such as when a function is expected to return a promise.

ERR_INVALID_STATE #

Indicates that an operation cannot be completed due to an invalid state. For instance, an object may have already been destroyed, or may be performing another operation.

ERR_INVALID_SYNC_FORK_INPUT #

A Buffer , TypedArray , DataView , or string was provided as stdio input to an asynchronous fork. See the documentation for the child_process module for more information.

ERR_INVALID_THIS #

A Node.js API function was called with an incompatible this value.

ERR_INVALID_TRANSFER_OBJECT #

An invalid transfer object was passed to postMessage() .

ERR_INVALID_TUPLE #

An element in the iterable provided to the WHATWG URLSearchParams constructor did not represent a [name, value] tuple – that is, if an element is not iterable, or does not consist of exactly two elements.

ERR_INVALID_URI #

An invalid URI was passed.

ERR_INVALID_URL #

An invalid URL was passed to the WHATWG URL constructor or the legacy url.parse() to be parsed. The thrown error object typically has an additional property ‘input’ that contains the URL that failed to parse.

ERR_INVALID_URL_SCHEME #

An attempt was made to use a URL of an incompatible scheme (protocol) for a specific purpose. It is only used in the WHATWG URL API support in the fs module (which only accepts URLs with ‘file’ scheme), but may be used in other Node.js APIs as well in the future.

ERR_IPC_CHANNEL_CLOSED #

An attempt was made to use an IPC communication channel that was already closed.

ERR_IPC_DISCONNECTED #

An attempt was made to disconnect an IPC communication channel that was already disconnected. See the documentation for the child_process module for more information.

ERR_IPC_ONE_PIPE #

An attempt was made to create a child Node.js process using more than one IPC communication channel. See the documentation for the child_process module for more information.

ERR_IPC_SYNC_FORK #

An attempt was made to open an IPC communication channel with a synchronously forked Node.js process. See the documentation for the child_process module for more information.

ERR_LOADER_CHAIN_INCOMPLETE #

An ESM loader hook returned without calling next() and without explicitly signaling a short circuit.

ERR_MANIFEST_ASSERT_INTEGRITY #

An attempt was made to load a resource, but the resource did not match the integrity defined by the policy manifest. See the documentation for policy manifests for more information.

ERR_MANIFEST_DEPENDENCY_MISSING #

An attempt was made to load a resource, but the resource was not listed as a dependency from the location that attempted to load it. See the documentation for policy manifests for more information.

ERR_MANIFEST_INTEGRITY_MISMATCH #

An attempt was made to load a policy manifest, but the manifest had multiple entries for a resource which did not match each other. Update the manifest entries to match in order to resolve this error. See the documentation for policy manifests for more information.

ERR_MANIFEST_INVALID_RESOURCE_FIELD #

A policy manifest resource had an invalid value for one of its fields. Update the manifest entry to match in order to resolve this error. See the documentation for policy manifests for more information.

ERR_MANIFEST_INVALID_SPECIFIER #

A policy manifest resource had an invalid value for one of its dependency mappings. Update the manifest entry to match to resolve this error. See the documentation for policy manifests for more information.

ERR_MANIFEST_PARSE_POLICY #

An attempt was made to load a policy manifest, but the manifest was unable to be parsed. See the documentation for policy manifests for more information.

ERR_MANIFEST_TDZ #

An attempt was made to read from a policy manifest, but the manifest initialization has not yet taken place. This is likely a bug in Node.js.

ERR_MANIFEST_UNKNOWN_ONERROR #

A policy manifest was loaded, but had an unknown value for its «onerror» behavior. See the documentation for policy manifests for more information.

ERR_MEMORY_ALLOCATION_FAILED #

An attempt was made to allocate memory (usually in the C++ layer) but it failed.

ERR_MESSAGE_TARGET_CONTEXT_UNAVAILABLE #

A message posted to a MessagePort could not be deserialized in the target vm Context . Not all Node.js objects can be successfully instantiated in any context at this time, and attempting to transfer them using postMessage() can fail on the receiving side in that case.

ERR_METHOD_NOT_IMPLEMENTED #

A method is required but not implemented.

ERR_MISSING_ARGS #

A required argument of a Node.js API was not passed. This is only used for strict compliance with the API specification (which in some cases may accept func(undefined) but not func() ). In most native Node.js APIs, func(undefined) and func() are treated identically, and the ERR_INVALID_ARG_TYPE error code may be used instead.

ERR_MISSING_OPTION #

For APIs that accept options objects, some options might be mandatory. This code is thrown if a required option is missing.

ERR_MISSING_PASSPHRASE #

An attempt was made to read an encrypted key without specifying a passphrase.

ERR_MISSING_PLATFORM_FOR_WORKER #

The V8 platform used by this instance of Node.js does not support creating Workers. This is caused by lack of embedder support for Workers. In particular, this error will not occur with standard builds of Node.js.

ERR_MISSING_TRANSFERABLE_IN_TRANSFER_LIST #

An object that needs to be explicitly listed in the transferList argument is in the object passed to a postMessage() call, but is not provided in the transferList for that call. Usually, this is a MessagePort .

In Node.js versions prior to v15.0.0, the error code being used here was ERR_MISSING_MESSAGE_PORT_IN_TRANSFER_LIST . However, the set of transferable object types has been expanded to cover more types than MessagePort .

ERR_MODULE_NOT_FOUND #

A module file could not be resolved by the ECMAScript modules loader while attempting an import operation or when loading the program entry point.

ERR_MULTIPLE_CALLBACK #

A callback was called more than once.

A callback is almost always meant to only be called once as the query can either be fulfilled or rejected but not both at the same time. The latter would be possible by calling a callback more than once.

ERR_NAPI_CONS_FUNCTION #

While using Node-API , a constructor passed was not a function.

ERR_NAPI_INVALID_DATAVIEW_ARGS #

While calling napi_create_dataview() , a given offset was outside the bounds of the dataview or offset + length was larger than a length of given buffer .

ERR_NAPI_INVALID_TYPEDARRAY_ALIGNMENT #

While calling napi_create_typedarray() , the provided offset was not a multiple of the element size.

ERR_NAPI_INVALID_TYPEDARRAY_LENGTH #

While calling napi_create_typedarray() , (length * size_of_element) + byte_offset was larger than the length of given buffer .

ERR_NAPI_TSFN_CALL_JS #

An error occurred while invoking the JavaScript portion of the thread-safe function.

ERR_NAPI_TSFN_GET_UNDEFINED #

An error occurred while attempting to retrieve the JavaScript undefined value.

ERR_NAPI_TSFN_START_IDLE_LOOP #

On the main thread, values are removed from the queue associated with the thread-safe function in an idle loop. This error indicates that an error has occurred when attempting to start the loop.

ERR_NAPI_TSFN_STOP_IDLE_LOOP #

Once no more items are left in the queue, the idle loop must be suspended. This error indicates that the idle loop has failed to stop.

ERR_NOT_BUILDING_SNAPSHOT #

An attempt was made to use operations that can only be used when building V8 startup snapshot even though Node.js isn’t building one.

ERR_NO_CRYPTO #

An attempt was made to use crypto features while Node.js was not compiled with OpenSSL crypto support.

ERR_NO_ICU #

An attempt was made to use features that require ICU, but Node.js was not compiled with ICU support.

ERR_NON_CONTEXT_AWARE_DISABLED #

A non-context-aware native addon was loaded in a process that disallows them.

ERR_OUT_OF_RANGE #

A given value is out of the accepted range.

ERR_PACKAGE_IMPORT_NOT_DEFINED #

The package.json «imports» field does not define the given internal package specifier mapping.

ERR_PACKAGE_PATH_NOT_EXPORTED #

The package.json «exports» field does not export the requested subpath. Because exports are encapsulated, private internal modules that are not exported cannot be imported through the package resolution, unless using an absolute URL.

ERR_PARSE_ARGS_INVALID_OPTION_VALUE #

When strict set to true , thrown by util.parseArgs() if a value is provided for an option of type , or if a value is provided for an option of type .

ERR_PARSE_ARGS_UNEXPECTED_POSITIONAL #

Thrown by util.parseArgs() , when a positional argument is provided and allowPositionals is set to false .

ERR_PARSE_ARGS_UNKNOWN_OPTION #

When strict set to true , thrown by util.parseArgs() if an argument is not configured in options .

ERR_PERFORMANCE_INVALID_TIMESTAMP #

An invalid timestamp value was provided for a performance mark or measure.

ERR_PERFORMANCE_MEASURE_INVALID_OPTIONS #

Invalid options were provided for a performance measure.

ERR_PROTO_ACCESS #

Accessing Object.prototype.__proto__ has been forbidden using —disable-proto=throw . Object.getPrototypeOf and Object.setPrototypeOf should be used to get and set the prototype of an object.

ERR_REQUIRE_ESM #

An attempt was made to require() an ES Module.

ERR_SCRIPT_EXECUTION_INTERRUPTED #

Script execution was interrupted by SIGINT (For example, Ctrl + C was pressed.)

ERR_SCRIPT_EXECUTION_TIMEOUT #

Script execution timed out, possibly due to bugs in the script being executed.

ERR_SERVER_ALREADY_LISTEN #

The server.listen() method was called while a net.Server was already listening. This applies to all instances of net.Server , including HTTP, HTTPS, and HTTP/2 Server instances.

ERR_SERVER_NOT_RUNNING #

The server.close() method was called when a net.Server was not running. This applies to all instances of net.Server , including HTTP, HTTPS, and HTTP/2 Server instances.

ERR_SOCKET_ALREADY_BOUND #

An attempt was made to bind a socket that has already been bound.

ERR_SOCKET_BAD_BUFFER_SIZE #

An invalid (negative) size was passed for either the recvBufferSize or sendBufferSize options in dgram.createSocket() .

ERR_SOCKET_BAD_PORT #

An API function expecting a port >= 0 and ERR_SOCKET_BAD_TYPE #

An API function expecting a socket type ( udp4 or udp6 ) received an invalid value.

ERR_SOCKET_BUFFER_SIZE #

While using dgram.createSocket() , the size of the receive or send Buffer could not be determined.

ERR_SOCKET_CLOSED #

An attempt was made to operate on an already closed socket.

ERR_SOCKET_CLOSED_BEFORE_CONNECTION #

When calling net.Socket.write() on a connecting socket and the socket was closed before the connection was established.

ERR_SOCKET_DGRAM_IS_CONNECTED #

A dgram.connect() call was made on an already connected socket.

ERR_SOCKET_DGRAM_NOT_CONNECTED #

A dgram.disconnect() or dgram.remoteAddress() call was made on a disconnected socket.

ERR_SOCKET_DGRAM_NOT_RUNNING #

A call was made and the UDP subsystem was not running.

ERR_SRI_PARSE #

A string was provided for a Subresource Integrity check, but was unable to be parsed. Check the format of integrity attributes by looking at the Subresource Integrity specification.

ERR_STREAM_ALREADY_FINISHED #

A stream method was called that cannot complete because the stream was finished.

ERR_STREAM_CANNOT_PIPE #

An attempt was made to call stream.pipe() on a Writable stream.

ERR_STREAM_DESTROYED #

A stream method was called that cannot complete because the stream was destroyed using stream.destroy() .

ERR_STREAM_NULL_VALUES #

An attempt was made to call stream.write() with a null chunk.

ERR_STREAM_PREMATURE_CLOSE #

An error returned by stream.finished() and stream.pipeline() , when a stream or a pipeline ends non gracefully with no explicit error.

ERR_STREAM_PUSH_AFTER_EOF #

An attempt was made to call stream.push() after a null (EOF) had been pushed to the stream.

ERR_STREAM_UNSHIFT_AFTER_END_EVENT #

An attempt was made to call stream.unshift() after the ‘end’ event was emitted.

ERR_STREAM_WRAP #

Prevents an abort if a string decoder was set on the Socket or if the decoder is in objectMode .

ERR_STREAM_WRITE_AFTER_END #

An attempt was made to call stream.write() after stream.end() has been called.

ERR_STRING_TOO_LONG #

An attempt has been made to create a string longer than the maximum allowed length.

ERR_SYNTHETIC #

An artificial error object used to capture the call stack for diagnostic reports.

ERR_SYSTEM_ERROR #

An unspecified or non-specific system error has occurred within the Node.js process. The error object will have an err.info object property with additional details.

ERR_TAP_LEXER_ERROR #

An error representing a failing lexer state.

ERR_TAP_PARSER_ERROR #

An error representing a failing parser state. Additional information about the token causing the error is available via the cause property.

ERR_TAP_VALIDATION_ERROR #

This error represents a failed TAP validation.

ERR_TEST_FAILURE #

This error represents a failed test. Additional information about the failure is available via the cause property. The failureType property specifies what the test was doing when the failure occurred.

ERR_TLS_CERT_ALTNAME_FORMAT #

This error is thrown by checkServerIdentity if a user-supplied subjectaltname property violates encoding rules. Certificate objects produced by Node.js itself always comply with encoding rules and will never cause this error.

ERR_TLS_CERT_ALTNAME_INVALID #

While using TLS, the host name/IP of the peer did not match any of the subjectAltNames in its certificate.

ERR_TLS_DH_PARAM_SIZE #

While using TLS, the parameter offered for the Diffie-Hellman ( DH ) key-agreement protocol is too small. By default, the key length must be greater than or equal to 1024 bits to avoid vulnerabilities, even though it is strongly recommended to use 2048 bits or larger for stronger security.

ERR_TLS_HANDSHAKE_TIMEOUT #

A TLS/SSL handshake timed out. In this case, the server must also abort the connection.

ERR_TLS_INVALID_CONTEXT #

The context must be a SecureContext .

ERR_TLS_INVALID_PROTOCOL_METHOD #

The specified secureProtocol method is invalid. It is either unknown, or disabled because it is insecure.

ERR_TLS_INVALID_PROTOCOL_VERSION #

Valid TLS protocol versions are ‘TLSv1’ , ‘TLSv1.1’ , or ‘TLSv1.2’ .

ERR_TLS_INVALID_STATE #

The TLS socket must be connected and securely established. Ensure the ‘secure’ event is emitted before continuing.

ERR_TLS_PROTOCOL_VERSION_CONFLICT #

Attempting to set a TLS protocol minVersion or maxVersion conflicts with an attempt to set the secureProtocol explicitly. Use one mechanism or the other.

ERR_TLS_PSK_SET_IDENTIY_HINT_FAILED #

Failed to set PSK identity hint. Hint may be too long.

ERR_TLS_RENEGOTIATION_DISABLED #

An attempt was made to renegotiate TLS on a socket instance with TLS disabled.

ERR_TLS_REQUIRED_SERVER_NAME #

While using TLS, the server.addContext() method was called without providing a host name in the first parameter.

ERR_TLS_SESSION_ATTACK #

An excessive amount of TLS renegotiations is detected, which is a potential vector for denial-of-service attacks.

ERR_TLS_SNI_FROM_SERVER #

An attempt was made to issue Server Name Indication from a TLS server-side socket, which is only valid from a client.

ERR_TRACE_EVENTS_CATEGORY_REQUIRED #

The trace_events.createTracing() method requires at least one trace event category.

ERR_TRACE_EVENTS_UNAVAILABLE #

The node:trace_events module could not be loaded because Node.js was compiled with the —without-v8-platform flag.

ERR_TRANSFORM_ALREADY_TRANSFORMING #

A Transform stream finished while it was still transforming.

ERR_TRANSFORM_WITH_LENGTH_0 #

A Transform stream finished with data still in the write buffer.

ERR_TTY_INIT_FAILED #

The initialization of a TTY failed due to a system error.

ERR_UNAVAILABLE_DURING_EXIT #

Function was called within a process.on(‘exit’) handler that shouldn’t be called within process.on(‘exit’) handler.

ERR_UNCAUGHT_EXCEPTION_CAPTURE_ALREADY_SET #

process.setUncaughtExceptionCaptureCallback() was called twice, without first resetting the callback to null .

This error is designed to prevent accidentally overwriting a callback registered from another module.

ERR_UNESCAPED_CHARACTERS #

A string that contained unescaped characters was received.

ERR_UNHANDLED_ERROR #

An unhandled error occurred (for instance, when an ‘error’ event is emitted by an EventEmitter but an ‘error’ handler is not registered).

ERR_UNKNOWN_BUILTIN_MODULE #

Used to identify a specific kind of internal Node.js error that should not typically be triggered by user code. Instances of this error point to an internal bug within the Node.js binary itself.

ERR_UNKNOWN_CREDENTIAL #

A Unix group or user identifier that does not exist was passed.

ERR_UNKNOWN_ENCODING #

An invalid or unknown encoding option was passed to an API.

ERR_UNKNOWN_FILE_EXTENSION #

An attempt was made to load a module with an unknown or unsupported file extension.

ERR_UNKNOWN_MODULE_FORMAT #

An attempt was made to load a module with an unknown or unsupported format.

ERR_UNKNOWN_SIGNAL #

An invalid or unknown process signal was passed to an API expecting a valid signal (such as subprocess.kill() ).

ERR_UNSUPPORTED_DIR_IMPORT #

import a directory URL is unsupported. Instead, self-reference a package using its name and define a custom subpath in the «exports» field of the package.json file.

ERR_UNSUPPORTED_ESM_URL_SCHEME #

import with URL schemes other than file and data is unsupported.

ERR_USE_AFTER_CLOSE #

An attempt was made to use something that was already closed.

ERR_VALID_PERFORMANCE_ENTRY_TYPE #

While using the Performance Timing API ( perf_hooks ), no valid performance entry types are found.

ERR_VM_DYNAMIC_IMPORT_CALLBACK_MISSING #

A dynamic import callback was not specified.

ERR_VM_MODULE_ALREADY_LINKED #

The module attempted to be linked is not eligible for linking, because of one of the following reasons:

• It has already been linked ( linkingStatus is ‘linked’ )
• It is being linked ( linkingStatus is ‘linking’ )
• Linking has failed for this module ( linkingStatus is ‘errored’ )

ERR_VM_MODULE_CACHED_DATA_REJECTED #

The cachedData option passed to a module constructor is invalid.

ERR_VM_MODULE_CANNOT_CREATE_CACHED_DATA #

Cached data cannot be created for modules which have already been evaluated.

ERR_VM_MODULE_DIFFERENT_CONTEXT #

The module being returned from the linker function is from a different context than the parent module. Linked modules must share the same context.

ERR_VM_MODULE_LINK_FAILURE #

The module was unable to be linked due to a failure.

ERR_VM_MODULE_NOT_MODULE #

The fulfilled value of a linking promise is not a vm.Module object.

ERR_VM_MODULE_STATUS #

The current module’s status does not allow for this operation. The specific meaning of the error depends on the specific function.

ERR_WASI_ALREADY_STARTED #

The WASI instance has already started.

ERR_WASI_NOT_STARTED #

The WASI instance has not been started.

ERR_WEBASSEMBLY_RESPONSE #

The Response that has been passed to WebAssembly.compileStreaming or to WebAssembly.instantiateStreaming is not a valid WebAssembly response.

ERR_WORKER_INIT_FAILED #

The Worker initialization failed.

ERR_WORKER_INVALID_EXEC_ARGV #

The execArgv option passed to the Worker constructor contains invalid flags.

ERR_WORKER_NOT_RUNNING #

An operation failed because the Worker instance is not currently running.

ERR_WORKER_OUT_OF_MEMORY #

The Worker instance terminated because it reached its memory limit.

ERR_WORKER_PATH #

The path for the main script of a worker is neither an absolute path nor a relative path starting with ./ or ../ .

ERR_WORKER_UNSERIALIZABLE_ERROR #

All attempts at serializing an uncaught exception from a worker thread failed.

ERR_WORKER_UNSUPPORTED_OPERATION #

The requested functionality is not supported in worker threads.

ERR_ZLIB_INITIALIZATION_FAILED #

Creation of a zlib object failed due to incorrect configuration.

History

Max header size in http_parser was set to 8 KiB.

Too much HTTP header data was received. In order to protect against malicious or malconfigured clients, if more than 8 KiB of HTTP header data is received then HTTP parsing will abort without a request or response object being created, and an Error with this code will be emitted.

HPE_UNEXPECTED_CONTENT_LENGTH #

Server is sending both a Content-Length header and Transfer-Encoding: chunked .

Transfer-Encoding: chunked allows the server to maintain an HTTP persistent connection for dynamically generated content. In this case, the Content-Length HTTP header cannot be used.

Use Content-Length or Transfer-Encoding: chunked .

MODULE_NOT_FOUND #

History

Version	Changes
v11.4.0, v10.15.0

Added requireStack property.

A module file could not be resolved by the CommonJS modules loader while attempting a require() operation or when loading the program entry point.

Legacy Node.js error codes #

ERR_CANNOT_TRANSFER_OBJECT #

The value passed to postMessage() contained an object that is not supported for transferring.

ERR_CRYPTO_HASH_DIGEST_NO_UTF16 #

The UTF-16 encoding was used with hash.digest() . While the hash.digest() method does allow an encoding argument to be passed in, causing the method to return a string rather than a Buffer , the UTF-16 encoding (e.g. ucs or utf16le ) is not supported.

ERR_HTTP2_FRAME_ERROR #

Used when a failure occurs sending an individual frame on the HTTP/2 session.

Used when an HTTP/2 Headers Object is expected.

Used when a required header is missing in an HTTP/2 message.

HTTP/2 informational headers must only be sent prior to calling the Http2Stream.prototype.respond() method.

ERR_HTTP2_STREAM_CLOSED #

Used when an action has been performed on an HTTP/2 Stream that has already been closed.

ERR_HTTP_INVALID_CHAR #

Used when an invalid character is found in an HTTP response status message (reason phrase).

ERR_INDEX_OUT_OF_RANGE #

A given index was out of the accepted range (e.g. negative offsets).

ERR_INVALID_OPT_VALUE #

An invalid or unexpected value was passed in an options object.

ERR_INVALID_OPT_VALUE_ENCODING #

An invalid or unknown file encoding was passed.

ERR_MISSING_MESSAGE_PORT_IN_TRANSFER_LIST #

This error code was replaced by ERR_MISSING_TRANSFERABLE_IN_TRANSFER_LIST in Node.js v15.0.0, because it is no longer accurate as other types of transferable objects also exist now.

ERR_NAPI_CONS_PROTOTYPE_OBJECT #

Used by the Node-API when Constructor.prototype is not an object.

ERR_NETWORK_IMPORT_BAD_RESPONSE #

Response was received but was invalid when importing a module over the network.

ERR_NETWORK_IMPORT_DISALLOWED #

A network module attempted to load another module that it is not allowed to load. Likely this restriction is for security reasons.

ERR_NO_LONGER_SUPPORTED #

A Node.js API was called in an unsupported manner, such as Buffer.write(string, encoding, offset[, length]) .

ERR_OPERATION_FAILED #

An operation failed. This is typically used to signal the general failure of an asynchronous operation.

ERR_OUTOFMEMORY #

Used generically to identify that an operation caused an out of memory condition.

ERR_PARSE_HISTORY_DATA #

The node:repl module was unable to parse data from the REPL history file.

ERR_SOCKET_CANNOT_SEND #

Data could not be sent on a socket.

ERR_STDERR_CLOSE #

History

Version	Changes
v12.0.0

Rather than emitting an error, process.stderr.end() now only closes the stream side but not the underlying resource, making this error obsolete.

Removed in: v10.12.0

An attempt was made to close the process.stderr stream. By design, Node.js does not allow stdout or stderr streams to be closed by user code.

ERR_STDOUT_CLOSE #

History

Version	Changes
v10.12.0

Rather than emitting an error, process.stderr.end() now only closes the stream side but not the underlying resource, making this error obsolete.

Removed in: v10.12.0

An attempt was made to close the process.stdout stream. By design, Node.js does not allow stdout or stderr streams to be closed by user code.

ERR_STREAM_READ_NOT_IMPLEMENTED #

Used when an attempt is made to use a readable stream that has not implemented readable._read() .

ERR_TLS_RENEGOTIATION_FAILED #

Used when a TLS renegotiation request has failed in a non-specific way.

ERR_TRANSFERRING_EXTERNALIZED_SHAREDARRAYBUFFER #

A SharedArrayBuffer whose memory is not managed by the JavaScript engine or by Node.js was encountered during serialization. Such a SharedArrayBuffer cannot be serialized.

This can only happen when native addons create SharedArrayBuffer s in «externalized» mode, or put existing SharedArrayBuffer into externalized mode.

ERR_UNKNOWN_STDIN_TYPE #

An attempt was made to launch a Node.js process with an unknown stdin file type. This error is usually an indication of a bug within Node.js itself, although it is possible for user code to trigger it.

ERR_UNKNOWN_STREAM_TYPE #

An attempt was made to launch a Node.js process with an unknown stdout or stderr file type. This error is usually an indication of a bug within Node.js itself, although it is possible for user code to trigger it.

ERR_V8BREAKITERATOR #

The V8 BreakIterator API was used but the full ICU data set is not installed.

ERR_VALUE_OUT_OF_RANGE #

Used when a given value is out of the accepted range.

ERR_VM_MODULE_NOT_LINKED #

The module must be successfully linked before instantiation.

ERR_VM_MODULE_LINKING_ERRORED #

The linker function returned a module for which linking has failed.

ERR_WORKER_UNSUPPORTED_EXTENSION #

The pathname used for the main script of a worker has an unknown file extension.

ERR_ZLIB_BINDING_CLOSED #

Used when an attempt is made to use a zlib object after it has already been closed.

Источник

Adblock
detector

Version	Changes
v10.12.0

Note: If you want to see how to handle these in React, take a look at my new post on that here — handling async errors with axios in react.

Whenever you’re making a backend API call with axios, you have to consider what to do with the .catch() block of your promise. Now, you might think that your API is highly available and it’ll be running 24/7. You might think that the user workflow is pretty clear, your javascript is sane, and you have unit tests. So when you stare at the catch block when making requests using axios you might think — «Well… I’ll just console.log it. That’ll be fine.»

axios.get('/my-highly-available-api').then(response => {
    // do stuff
})
.catch(err => {
    // what now?
    console.log(err);
})

But there are so many many many more things that are outside of your control that could throw errors when making API requests. And you probably don’t even know that they’re happening!

This post deals mainly with errors you see in the browser. Things can get pretty funny looking on the back end too — just take a look at 3 things you might see in your backend logs

Below are 3 types of errors that could appear, and how to handle it, when using axios.

Catching axios errors

Below is a snippet I’ve started including in a few JS projects.

axios.post(url, data).then(res => {
        // do good things
})
.catch(err => {
    if (err.response) {
      // client received an error response (5xx, 4xx)
    } else if (err.request) {
      // client never received a response, or request never left
    } else {
      // anything else
    }
})

Each condition is meant to capture a different type of error.

Checking error.response

If your error object contains a response field, that means your server responded with a 4xx/5xx error. Usually this is the error we’re most familiar with, and is most straightforward to handle.

Do things like a show a 404 Not Found page/error message if your API returns a 404. Show a different error message if your backend is returning a 5xx or not returning anything at all. You might think your well-architected backend won’t throw errors — but its a matter of when, not if.

Checking error.request

The second class of errors is where you don’t have a response but there’s a request field attached to the error. When does this happen? This happens when the browser was able to make a request, but for some reason, it didn’t see a response.

This can happen if:

• you’re in a spotty network (think underground subway, or a building wireless network)
• if your backend is hanging on each request and not returning a response on time
• if you are making cross-domain requests and you’re not authorized to make the request
• if you’re making cross-domain requests and you are authorized, but the backend API returns an error

One of the more common versions of this error had a message «Network Error» which is a useless error message. We have a front-end and a backend api hosted on different domains, so every backend API call is a cross-domain request.

Due to security constraints on JS in the browser, if you make an API request, and it fails due to crappy networks, the only error you’ll see is «Network Error» which is incredibly unhelpful. It can mean anything from «your device doesn’t have internet connectivity» to «your OPTIONS returned a 5xx» (if you make CORS requests). The reason for «Network Error» is described well here on this StackOverflow answer

All the other types of errors

If your error object doesn’t have the response or request field on it, that means its not an axios error and theres likely something else wrong in your app. The error message + stack trace should help you figure out where its coming from.

How do you fix it?

Degrading the user experience

This all depends on your app. For the projects I work on, for each of the features that use those endpoints, we degrade the user experience.

For example, if the request fails, and the page is useless without that data, then we have a bigger error page that will appear and offer users a way out — which sometimes is only a «Refresh the page» button.

Another example, if a request fails for a profile picture in a social media stream, we can show a placeholder image and disable profile picture changes, along with a toaster message explaining why the «update profile picture» button is disabled. However, showing an alert saying «422 Unprocessable Entity» is useless to see as a user.

Spotty networks

The web client I work on is used in school networks which can be absolutely terrible. The availability of your backend barely has anything to do with it, the request sometimes fail to leave the school network.

To solve these types of intermittent network problems, we added in axios-retry. This solved a good amount of the errors we were seeing in production. We added this to our axios setup:

const _axios = require('axios')
const axiosRetry = require('axios-retry')

const axios = _axios.create()

// https://github.com/softonic/axios-retry/issues/87
const retryDelay = (retryNumber = 0) => {
    const seconds = Math.pow(2, retryNumber) * 1000;
    const randomMs = 1000 * Math.random();
    return seconds + randomMs;
};

axiosRetry(axios, {
    retries: 2,
    retryDelay,
    // retry on Network Error & 5xx responses
    retryCondition: axiosRetry.isRetryableError,
});

module.exports = axios;

We were able to see that 10% of our users (which are in crappy school networks) were seeing sporadic «Network Errors» and that dropped down to <2% after adding in automatic retries on failure.

^ This is a screenshot of our errors is the count of «Network Errors» as they appear in NewRelic and are showing <1% of requests are erroring out.

Which leads to my last point:

Add error reporting to your front-end

Its helpful to have front-end error/event reporting so that you know whats happening in prod before your users tell you. At my day job, we use NewRelic Browser (paid service — no affiliation, just a fan) to send error events from the front-end. So whenever we catch an exception, we log the error message, along with the stack trace (although thats sometimes useless with minified bundles), and some metadata about the current session so we can try to recreate it.

Other tools that fill this space are Sentry + browser SDK, Rollbar, and a whole bunch of other useful ones listed here

Wrapping up

If you get nothing else out of this, do one thing.

Go to your code base now, and review how you’re handling errors with axios.

• Check if you’re doing automatic retries, and consider adding axios-retry if you aren’t
• Check that you’re catching errors, and letting the user know that something has happened. axios.get(...).catch(console.log) isn’t good enough.

So. How do you handle your errors? Let me know in the comments.