Oer 7451 in load indicator error code osd 04500 illegal option specified

Oer 7451 in load indicator error code osd 04500 задан недопустимый параметр

Review miscellaneous errors.

Illegal option specified

Cause: This is an internal error, not normally expected to occur.

Action: Contact Oracle Support Services.

Internal buffer overflow

Cause: This is an internal error, not normally expected to occur.

Action: Contact Oracle Support Services.

Translations nested too deep

Cause: Program encountered too many intermediate translations while attempting to translate a configuration variable.

Action: Simplify values of configuration parameters to include fewer intermediate translations.

Text contains no translatable elements

Cause: Program cannot recognize variables in text to be translated.

Action: Check and, if necessary, correct text to be translated.

stdin not responding

Cause: System cannot receive input from standard input stream.

Action: Verify that process has access to an input device.

Unable to spawn process through system()

Cause: System is out of memory or executable is invalid.

Action: Shut down unnecessary processes; install more memory in the computer. Verify name of executable.

Operating system roles are not supported

Cause: An attempt was made to use an operating system role.

Action: Only use roles that were created ‘ IDENTIFIED BY PASSWORD ‘ as opposed to ‘ IDENTIFIED EXTERNALLY ‘.

Unable to get date and time from the operating system

Cause: Unexpected return from GetLocalTime() call.

Action: Verify that system time is correct on the computer.

Unable to translate the ‘ USERNAME ‘ config.ora variable on server

Cause: ‘ USERNAME ‘ configuration parameter variable on host is not properly set.

Action: Verify ‘ USERNAME ‘ variable is set.

The Windows Group name is too long for internal buffer

Источник

One Can Succeed at Almost Anything For Which He Has Enthusiasm.

All the Views expressed here are my own and do not reflect opinions or views of the anyone else.All the views are tested on my testing environment and kindly test the post before applying anything on production.You can reach to me at neeraj.vishen@gmail.com .

Tuesday, June 14, 2011

32-bit Oracle Database server is *not* certified on Windows x64

Once while Monitering alert logfile, i found that the below error is occuring at every 10 sec. The error is as :
Tue Jun 07 16:19:43 2011
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Tue Jun 07 16:19:53 2011
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Tue Jun 07 16:20:03 2011

Actually the Oracle database software installs without an issue. It is when I created the actual database that I encountered the same repeated errors in my alert.log after startup. On searching Meta-link points to Doc. ID 1060806.1 which states the cause and solution as below

Cause : Installed 32-bit Oracle database software on a 64-bit MS Windows OS which is not supported.

Note: For the Database software, you can ONLY install the x64 version on MS Windows (x64). You can NOT install the 32-bit version Database software on MS Windows (x64).

Источник

Oer 7451 in load indicator error code osd 04500 задан недопустимый параметр

Review miscellaneous errors.

Illegal option specified

Cause: This is an internal error, not normally expected to occur.

Action: Contact Oracle Support Services.

Internal buffer overflow

Cause: This is an internal error, not normally expected to occur.

Action: Contact Oracle Support Services.

Translations nested too deep

Cause: Program encountered too many intermediate translations while attempting to translate a configuration variable.

Action: Simplify values of configuration parameters to include fewer intermediate translations.

Text contains no translatable elements

Cause: Program cannot recognize variables in text to be translated.

Action: Check and, if necessary, correct text to be translated.

stdin not responding

Cause: System cannot receive input from standard input stream.

Action: Verify that process has access to an input device.

Unable to spawn process through system()

Cause: System is out of memory or executable is invalid.

Action: Shut down unnecessary processes; install more memory in the computer. Verify name of executable.

Operating system roles are not supported

Cause: An attempt was made to use an operating system role.

Action: Only use roles that were created ‘ IDENTIFIED BY PASSWORD ‘ as opposed to ‘ IDENTIFIED EXTERNALLY ‘.

Unable to get date and time from the operating system

Cause: Unexpected return from GetLocalTime() call.

Action: Verify that system time is correct on the computer.

Unable to translate the ‘ USERNAME ‘ config.ora variable on server

Cause: ‘ USERNAME ‘ configuration parameter variable on host is not properly set.

Action: Verify ‘ USERNAME ‘ variable is set.

‘remote_os_authent’ init.ora variable not set to TRUE

Cause: For remote operating system logon to function, ‘ REMOTE_OS_AUTHENT ‘ parameter must be set to TRUE .

Action: Shut down and start up instance with ‘ REMOTE_OS_AUTHENT = TRUE ‘ in initialization parameter file.

The Windows Group name is too long for internal buffer

Источник

OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified (Doc ID 1060806.1)

Last updated on JANUARY 30, 2022

Applies to:

Oracle Database — Enterprise Edition — Version 10.2.0.1 to 11.2.0.1 [Release 10.2 to 11.2]
Oracle Database Exadata Cloud Machine — Version N/A and later
Oracle Cloud Infrastructure — Database Service — Version N/A and later
Oracle Database Exadata Express Cloud Service — Version N/A and later
Oracle Database Cloud Exadata Service — Version N/A and later
Microsoft Windows x64 (64-bit)
Microsoft Windows (32-bit)

Symptoms

The following error repeats over and over in the database alert log immediately after startup.

OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !

Changes

This is a new installation.

Cause

To view full details, sign in with your My Oracle Support account.

Don’t have a My Oracle Support account? Click to get started!

In this Document

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.

Oracle offers a comprehensive and fully integrated stack of cloud applications and platform services. For more information about Oracle (NYSE:ORCL), visit oracle.com. пїЅ Oracle | Contact and Chat | Support | Communities | Connect with us | | | | Legal Notices | Terms of Use

Источник

2010-09-15 20:52:11.551
7451 REL in the load indicator: Error Code = OSD-04500: illegal option specified
S/O-error: incorrect function (OS 1). !

2010-09-15 20:52:16.559
7451 REL in the load indicator: Error Code = OSD-04500: illegal option specified
S/O-error: incorrect function (OS 1). !

2010-09-15 20:52:21.566
7451 REL in the load indicator: Error Code = OSD-04500: illegal option specified
S/O-error: incorrect function (OS 1). !

Log files and alert track spitting are spewing this error on every new displays immediately after 5 seconds.

OS = Win7
Basis of data = 11 GR 2 (32-bit)

I’ve installed, uninstalled, reinstalled several times. Hint please?

See Metalink Note 1060806.1 (and NOTE: 740926.1), but short: you install 32-bit Oracle database on a 64-Bit Windows OS. Which is not supported. Then, download the 64-bit Oracle database software and install.

Similar Questions

I install Firefox from the repositories Fedora YUM via Kickstart. After installation, the .mozilla directory and its subdirectories do not exist. Even though I have the Firefox configuration files that I want to install, I don’t have a place to put them. And since Firefox seems to create a directory .mozilla/firefox/*default with a random name, I can’t easily just create the directory and then insert my files. Is there a way to do this fully automatic?

You can put files in the default templates folder (by default / / profile) in the program folder to make them appear automatically in a new Firefox profile.

Try to get an old laptop XP to a new computer laptop of W10 thunderbird.
Located existing profile and backed up on external hard drive.
Thunderbird installed on W10 and before breakfast copied the contents of the old profile folder to the profile under AppData/Roaming/Thunderbird/Profiles/profile.default folder
Launch thunderbird and it does not recognize the profile, it is as if she is trying to set it up from scratch.
Then tried to create new profile and copying the contents of the old profile of XP, but it did not work.
Then looked at the Add-ons, but the lightning it is not present, so could not remove it.
Any other suggestions?

C:Documents and SettingsFraserLocal SettingsApplication DataThunderbirdProfileselvh5ttl.dfault

This is not the path of the correct profile for XP.
Check this article and make sure that really copy you the profile folder.
http://KB.mozillazine.org/Profile_folder_-_Thunderbird#Windows_2000_and_XP

I do not understand why you created a second profile. With two profiles, you must always be careful to start Thunderbird with the right profile.

I installed Flight Simulator X and he ran well immediately after installation, but after having turned it off, I can’t run. I inserted the dvd and explored all areas of «program» I can think of, but I get no rsponse.

· You get the error message?

Follow these methods.

Method 1: Uninstall and reinstall the game.

Uninstall or change a program

Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

Method 3: Follow the steps in the article.

The problems of the game performance

I have a client that is running ESX 4.0 on a compatible with ESXi 5 host. When I went to upgrade the host to ESXi 5 I ran into a problem, I have never seen elsewhere. I started on the disk and screen with the status bar at the top is fine. Immediately after loading, before showing always the yellow background or license agreement, he throws a Uni purple screen and without words. If you leave it for about 20 seconds, then the screen goes black with gray blocks randomly everywhere. I tried with another download and CD but I get the same results. I couldn’t find anything on purple screens without the current text. Any help would be greatly appreciated!

Did you check if the version of the BIOS of the host must be updated in order to run ESXi 5.0?

Never had this problem until what MS downloaded and installed updates (for Windows7). So I said I’m going to widows 10 because I thought anyway, so I did this — still cannot open a new tab, or by clicking on the tab ‘+’ or ‘ctrl + T.
I spent about an hour going by most of the measures that have been provided by the support of Mozilla tech note and it did not help. I’m not going to create a new FF profile.
I restart my PC, nothing helped. I chose «never» (I forgot the exact wording) on all the Plug Ins and then rebooted and this did not help. I have not loaded Extensions.
I installed FF for Windows 10 just after the installation of Windows 10.
I am a user of whether average PC.
Thanks for any help you can give,
Steve V.

Now, I’m happy! Thank you very much.

New tab works now. It is because of me running the first program malware that you listed above, Malwarebytes. I am grateful that you suggested it because I would not have thought that that would be the problem (because the problem occurred immediately after a MS Windows7 update.

Anyway, thanks again for sharing your time and skills.

I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that’s when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can’t get it to connect at the same time.

Please read this message before doing anything.

This procedure is a diagnostic test. It is unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.

The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi — Fi connection on some models. The next normal boot can also be a bit slow.

The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

Test in safe mode. Same problem?

After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

I’m having a problem with the Software NI SignalExpress where the application fails to open completely — it closes immediately after the splash screen. I am using windows XP Pro. SP3.

I tried to uninstall, registry errors compensation and reinstall, I also tried the repair installation — or who work.

A test of SignalExpress installation was installed on my PC until I got a full copy with the purchase of a data acquisition (usb-6218).

Sounds a bit nasty. If repairing and reassembling and all this malarky does not recommend the use of msiblast to clean your computer of all the software of NOR and starting again with a new install. When you software uninnstall he didn’t get rid of everything, there is still hidden folders around dootted.

I joined msiblast.exe.

-Make sure the radio button «Show OR installers only» is selected.

-Select all and then click on uninstall.

When this is complete, your computer will be NOT free. After that;

-Install all software from OR you for example LabVIEW Signal express

-Then install the drivers. The USB-6218 case uses the DAQmx driver that the latest version can be downloaded from this link.

If it persists then write again.

Original title: I think that my laptop updated overnight. Now when I try to turn on the widows Explorer crashed immediately after, sign in

As stated above I think that my updates of the laptop from one day to the next. Now when I boot, windows explore crashes immediately after the connection quite a lot. When I click on an icon

I suggest you to check the exact error message you get to do this in the Event Viewer:

Event Viewer is a tool that displays detailed information about the events important (for example, programs that don’t start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

For more information, see:

What are the information contained in the logs of the event (Event Viewer)?

Check out this link to open the event viewer:

Open event viewer

I suggest you to view update history to see which update might be causing the problem.

(a) open Windows Update by clicking Start , all programs, and then Windows Update.

(b) in the left pane, click view update history.

(c) to display more information about an update, double-click it.

Once you know Update KB number, provide us with the same for further analysis and troubleshooting.

Method 1:

Step 1:

I also suggest you to start the computer in safe mode and check if the problem persists.

Start your computer in safe mode

Step 2:

This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a «clean boot«. A clean boot helps eliminate software conflicts.

How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

Method 2:

Alternatively, you can try to perform the scan of the auditor of the system files on the computer.

Click on the link mentioned below for further guidance on the scanning of the file system Checker

Note: You may be prompted to insert the Windows Vista installation DVD, if any files are missing or damaged.

Hope this helps and keep us posted.

(This question was published only because I could not respond to existing similar questions without registering first.)

Problem was apparently a Thunderbird randomly hanging after automatic update to 38.4 on Windows 7 Enterprise. The process of dropping out/no response took place a few minutes after start of TB, compose messages, send or download of IMAP mail.

Shortcut to the final solution — probably corrupted files or folders at the OS level.

For those who are conducting similar research I also watched the references linked below.

En route to the solution, various obfuscation were met, all of which were interesting but NONE OF THESE solved the problem of the suspension, namely:

-back to Thunderbird 38.1 extracted from Mozilla’s FTP repository

-Disable all modules in SafeMode as suggested in posts below

-deactivation of reminders on calendar, pop ups and sounds like suggested in the posts below

-turn off sounds (in the systray) as suggested in posts below and new mail alerts

-Discover, finally, only one of the half-dozen or so synchronized account IMAPs has caused the problem, which is an account Exchange-synced via the excellent DavMail (Davmail upgrade to the latest version was another diversion)

-assuming that the compaction of TB was not his work and that he is too much vacuum/zombie files left lying around, leading to a redundant cleanup using Thunderfix (http://www.parhelia-tools.com/products/thunderfix/thunderfix.aspx), was nevertheless his cleaning of employment but not a solution

What worked then.

The procedure of backup profiles recommended TB in Thunderfix and elsewhere led to discover that the copy of Windows has won at least one file during the copy. Suspecting lower level corruption, I ran chkdsk D: /f (since all data are on D: and not on C: with the operating system). No major problems found aprt of 4 files analyzed once again.

I resorted to the use of SynckbackSE to do the backup instead, noting that one of the failures was Junk.msf. That and the knowledge that the account linked to Exchange was the likely to be the culprit, I restarted and deleted everything in IMAPmaillocalhost (DavMail connects via localhost stored files).

Restart Thunderbird (always on 38.1) and connect via DavMail pulled back all messages and folders from the source Exchange to resynchronize records localhost TB successfully. No need to use backup or same setting of TB.

Will probably now improve return to 38.1 after a period of stability.

After years of use of Thunderbird of the dowry of the year, it’s nice to know that it was not primarily at fault.

Thunderbird starts by does not respond after the update to version 38
https://support.Mozilla.org/en-us/questions/1073169

Thunderbird crashes, hangs, or freezes often and seemingly randomly
https://support.Mozilla.org/en-us/questions/1062142

Why Thunderbird freezes my computer after installation of exit 38 RESOLVED:

hardware acceleration = suspended new pop ups (bug message notification

Thanks for the info

MY iMac 27-inch has recently begun to disconnect me immediately after the connection. After reboot several times and even unplug, it seemed set. But when another user is connected, the computer immediately disconnected them. Then I logged in t Se if my account still worked, but he did the same for me. Just before this show, the computer also got very warm to the touch at the top. Its about 5 years with a lot of memory and hard disk space. I think that it is up-to-date with the latest software too. Appreciate any information or comments on what’s gong on. Thank you!

Try to reboot safe mode by pressing the SHIFT key until it reboots completely, and then try to restart normally. If this fails, then reset the PRAM by LANDAU and iMac SMC reset instructions and see if you can sign in successfully.

Please post back with your results.

Immediately after an update a few months back, that I had to change my password to a stronger one, iCloud began telling me that he had a problem with my account:

When I went to preferences, this happens:

So I type my password (I know the password is) and he accepts.

. For about half a second before immediately returning to the screen:

This was bugs me for months so if someone could help I would be very grateful!

If you enter the password once again it works or just reset and same screen then?

9 days ago I installed Windows 10 successfully on my iMac end-2012. I wonder since if I still need to keep my USB Flash drive plugged after installation. I have kept in just in case wherever she would break something and tried to find an answer but decided to ask here. So basically what I have to keep the flash drive in my iMac or will I still be able to run Windows 10 unless it is plugged. Thanks for all who will read this and help me with this problem.

I see no reason to keep the flash drive is plugged.

Was this a new installation or an upgrade of Windows 10? Your order of brightness of the keyboard (and other features on the row of function keys) work? Cam sex? Touchpad?

A black band appears just below the bookmarks toolbar immediately after the uninstall of a program called ‘Picexa ‘.
Please, what is your solution?

Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

You can use one of them to set toolbars to display.

• Firefox ‘3-bar’ menu button > customize > show/hide toolbars
• View > toolbars
  Press the ALT key, or press F10 to display the Menu bar
• Right click on empty toolbar space

I’m trying to change an iBook of 147 pages, and I want to add a new blank page immediately after page 73. I tried ctrl-click on the page, but the new page is added at the end of the chapter, which is obviously not where I want to.

Hello Jeff Reeves,.

Thank you for using communities of Apple Support.

From your post, I understand that you are not able to add a new page in the location you want to add. I know how it is important for your book or in the order that you want it to be in. Once you add the extra page will be able to do drag where you want to put it to you?

I recommend to review the section in this article to add a new page.

Add a new page

In the book pane (shown above), select the chapter or section to add pages to.

Click Add page in the toolbar, and then choose Pages > Option.

Tip: You can also add a new page by clicking on the order page in the book pane and choose Insert Page on the shortcut menu. The new page uses the default layout for the chapter or section.

Reorganize the chapters or sections

In the work pane, do one or both of the following:

Change the order of the chapters: drag them.

Change the order of the sections: drag an item to a new location in the chapter, or to another chapter.

When the new page is added at the end of the chapter, see if you are able to drag to the location wished it to be in.

Maybe you are looking for

Hi all This call began as does not — I got a power supply along and had to replace it. As the complete printer initialization of the façade revealed that all inks X’ed out. All diagnoses of electronic Module past right until he asked if all inks are

I had a mini ipad for some time, but as I travel a lot I have not been able to save. connection to my itunes allows only set up like the new ipad. I don’t want to do what I’m going to lose all my data.how can I save in this case?

Hello Hope someone can help me. In recent weeks I have received something in my MSN Messenger that bothers me so much. The problem is that if I write any message or any sentence in my messenger and while I’m talking to my friend, I get the message vo

While typing in ms word, cursor suddenly moves to another location and start typing there. Therefore, I need to see my monitor hit every time as I type. In addition, it makes my slow typing because of spending a lot of time to return the cursor to th

I’m going to delete my file on my D drive when I am the administrator. He asks to delete and I say ok. After its been trying to remove all the it comes up with an alert saying that I need permission to remove them. its takes about 12 GB of data betwe

Источник

свежеустановлено. секурити есеншл, но он и на остальных компах и нормально работает.
Path:

через sqlplus/nolog база опенится нормально. сервер приложений стартует нормально.

alert:

• From: «Wolfson Larry — lwolfs» <lawrence.wolfson@xxxxxxxxxx>
• To: «oracle_l» <Oracle-L@xxxxxxxxxxxxx>
• Date: Tue, 6 Apr 2010 15:52:07 -0500

     Just wondering if you ever saw anything like this?  
    We just got this Express Edition 10.2.0.1.0 DB turned over  to us
this week.
             Windows Server 2008 R2 Standard 
 
Mon Apr 05 14:28:28 2010
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option
specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option
specified
O/S-Error: (OS 1) Incorrect function. !  
 
    Happens about every 10 seconds. 
 
$ oerr ora 7451
 
07451, 00000, "slskstat: unable to obtain load information."
// *Cause: kstat library returned an error. Possible OS failure //
*Action: Check result code in sercose[0] for more information.
 
We're getting about 60K of errors/hour on the XE QA database.
Been happening since they installed DB in February. 
 
       googled this and got replies in Russian, Korean, Chinese, etc,
but none made much sense.
Even after translation. On ML I found one document and it was EMPTY.
 
Thanks
Larry

***************************************************************************
The information contained in this communication is confidential, is
intended only for the use of the recipient named above, and may be legally
privileged.

If the reader of this message is not the intended recipient, you are
hereby notified that any dissemination, distribution or copying of this
communication is strictly prohibited.

If you have received this communication in error, please resend this
communication to the sender and delete the original message or any copy
of it from your computer system.

Thank You.
****************************************************************************

• Follow-Ups:
  • Re: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
    • From: Harel Safra

  • RE: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
    • From: Wolfson Larry — lwolfs

Other related posts:

• » OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified — Wolfson Larry — lwolfs
• » Re: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified- Harel Safra
• » RE: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified- Wolfson Larry — lwolfs
• » RE: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified- Yong Huang
• » RE: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified- Wolfson Larry — lwolfs

Last Update:2014-01-15
Source: Internet

Too many OER 7451 in Load Indicator: Error Code = OSD-04500 troubleshooting

Task Description: Database fault, unable to expand space

Troubleshooting:

Error Message description

07451, 00000, "slskstat: unable to obtain load information."// *Cause:  kstat library returned an error. Possible OS failure// *Action: Check result code in sercose[0] for more information.

Database Version Information

SQL> select*fromv$version; 

Operating System Information

C:UsersAdministrator>systeminfo

Conclusion: The database version and operating system version must comply with the official support list Installed.

ODF：---------------------------------------------------------------------------------------

OER 7451 in Load Indicator: Error Code = OSD-04500: illegal option specified [ID 1060806.1]

Applies to:Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 11.2.0.1 - Release: 10.2 to 11.2Microsoft Windows (32-bit)Microsoft Windows x64 (64-bit)***Checked for relevance on 01-Nov-2011***SymptomsThe following error repeats over and overinthe database alert log immediately after startup. OER 7451 inLoad Indicator : Error Code = OSD-04500: illegal option specifiedO/S-Error: (OS 1) Incorrectfunction. ! ChangesThis is a new installation. CauseInstalled 32-bit Oracle database software on a 64-bit MS Windows OSwhichis not supported.  Note: For the Database software, you can ONLYinstallthe x64 version on MS Windows (x64).          You can NOTinstallthe 32-bit version Database software on MS Windows (x64). SolutionInstall 32-bit Oracle database software only on 32-bit MS Windows OS.



Zookeeper

Thank you Tanel Poder’blog and Kris’s blog for sharing about Oracle Database 11g Express Edition (11.2) Beta. We can download for Beta.
We will see version for Windows x32 and Linux x64. However I was curious for testing, and I have only Windows 7 (64 bits). OK… try to install and It’s work. Great!!!
***I don’t want to explain How to install, just show some pages***
After installed, we will see menu for «Oracle Database 11g XE» by clicking «Start» -> «All Programs»… and…
In menu, we can choose «Run SQL Command Line» and then…

In menu, If we choose «Get Started», we will see this page.
and check on each of menu.
How about memory parameters?

NAME TYPE VALUE
———————————— ———— ——————————
memory_max_target big integer 0

SQL> show parameter memory_target

NAME TYPE VALUE
———————————— ———— ——————————
memory_target big integer 0

SQL> show parameter sga_max_size

NAME TYPE VALUE
———————————— ———— ——————————
sga_max_size big integer 768M

SQL> show parameter sga_target

NAME TYPE VALUE
———————————— ———— ——————————
sga_target big integer 768M

SQL> show parameter pga_aggregate_target

NAME TYPE VALUE
———————————— ———— ——————————
pga_aggregate_target big integer 256M

NAME TYPE VALUE
———————————— ———— ——————————
log_buffer integer 5009408

We can check Online Documentation and Database 11g Express Edition Forum.
However, I hope to hear some idea and… after you test it -)

***In case: We installed XE 32bits in Windows 64bits. So We will see this error:
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !

However, I just want to test… for XE 11gR2