Ошибка 207 sql

MSSQLSERVER_207

Applies to: SQL Server (all supported versions)

Details

Explanation

This query error can be caused by one of the following problems.

The column name is misspelled or the column does not exist in any of the specified tables.

The collation of the database is case-sensitive and the case of the column name specified in the query does not match the case of the column defined in the table. For example, when a column is defined in a table as LastName and the database uses a case-sensitive collation, queries that refer to the column as Lastname or lastname will cause error 207 to return because the column name does not match.

A column alias, defined in the SELECT clause, is referenced in another clause such as a WHERE or GROUP BY clause. For example, the following query defines the column alias Year in the SELECT clause and refers to it in the GROUP BY clause.

Due to the order in which query clauses are logically processed, the example returns error 207. The processing order is as follows:

WITH CUBE or WITH ROLLUP

Because a column alias is not defined until the SELECT clause is processed, the alias name is unknown when the GROUP BY clause is processed.

The MERGE statement raises this error when the clause references columns in the source table but no rows are returned by the source table in the WHEN NOT MATCHED BY SOURCE clause. The error occurs because the columns in the source table cannot be accessed when no rows are returned to the query. For example, the clause WHEN NOT MATCHED BY SOURCE THEN UPDATE SET TargetTable.Col1 = SourceTable.Col1 may cause the statement to fail if Col1 in the source table is inaccessible.

User Action

Verify the following information and correct the statement as appropriate.

The column name exists in the table and is spelled correctly. The following example queries the sys.columns catalog view to return all column names for a given table.

The case sensitivity of the database collation. The following statement returns the collation of the specified database.

The abbreviation CS in the collation name indicates the collation is case-sensitive. For example, Latin1_General_CS_AS is a case-sensitive and accent-sensitive collation. Modify the column name to match the case of the column name as it is defined in the table.

A column alias is referenced incorrectly. Modify the statement by repeating the expression that defines the alias in the appropriate clause or by using a derived table. The following example repeats the expressions that define the Year alias in the GROUP BY clause.

The following example uses a derived table to make the alias name available to other clauses in the query. Notice that the alias Year is defined in the FROM clause, which is processed first, and so makes the alias available for use in other clauses in the query.

Источник

MSSQLSERVER_207

Применимо к: SQL Server (все поддерживаемые версии)

Сведения

Объяснение

Возможны следующие причины возникновения этой ошибки запроса.

Имя столбца неправильно указано, либо столбец не существует ни в одной указанной таблице.

Параметры сортировки базы данных учитывают регистр, а регистр имени столбца, указанный в запросе, не совпадает с регистром столбца, определенного в таблице. Например, если столбец определен в таблице как LastName, а для базы данных используются параметры сортировки с учетом регистра, при выполнении запросов, в которых для этого столбца указано имя Lastname или lastname, возникнет ошибка 207, так как имена столбцов не совпадают.

Псевдоним столбца, определенный в предложении SELECT, упоминается в другом предложении, например WHERE или GROUP BY. Например, следующий запрос определяет псевдоним столбца Year в предложении SELECT и упоминает его в предложении GROUP BY.

Порядок логической обработки предложений запросов вызывает возвращение ошибки 207. Далее приводится порядок обработки.

WITH CUBE или WITH ROLLUP

Поскольку псевдоним столбца не определяется до обработки предложения SELECT, псевдоним неизвестен при обработке предложения GROUP BY.

Инструкция MERGE вызывает эту ошибку, если ссылается на столбцы в исходной таблице, но строки не возвращаются исходной таблицей в предложении WHEN NOT MATCHED BY SOURCE. Данная ошибка возникает из-за того, что невозможно обратиться к столбцам в исходной таблице, если запрос не возвратил строк. Например, предложение WHEN NOT MATCHED BY SOURCE THEN UPDATE SET TargetTable.Col1 = SourceTable.Col1 может стать причиной ошибки инструкции из-за недоступности столбца Col1 в исходной таблице.

Действие пользователя

Проверьте следующую информацию и исправьте инструкцию соответствующим образом.

Наличие имени столбца в таблице и правильность его указания. В следующем примере запрос к представлению каталога sys.columns возвращает все имена столбцов для этой таблицы.

Учет регистра в параметрах сортировки базы данных. Следующая инструкция возвращает параметры сортировки для указанной базы данных.

Аббревиатура CS в имени параметров сортировки означает, что учитывается регистр символов. Например, Latin1_General_CS_AS определяет параметры сортировки с учетом диакритических знаков и с учетом регистра. Измените имя столбца, чтобы оно совпадало с тем именем столбца, которое было определено в таблице, вплоть до регистра.

Неправильное упоминание псевдонима столбца. Измените инструкцию, повторив выражение, определяющее псевдоним, в соответствующем предложении или использовав производную таблицу. В следующем примере в предложении GROUP BY повторяются выражения, определяющие псевдоним Year .

В следующем примере производная таблица используется для того, чтобы сделать псевдоним доступным для других предложений в запросе. Следует заметить, что псевдоним Year определяется в предложении FROM, которое обрабатывается в первую очередь, что делает псевдоним доступным для использования в других предложениях запроса.

Источник

My Views

Initiate Technology…!!

[SOLVED] invalid column name ‘publisher_type’ error 207 in MSSQL Replication

This post refers to MSSQL replication error “ invalid column name ‘publisher_type’ error 207 ”

Today I have shifted MSSQL Database server from one VM to new VM. The process which I followed was

• Stopped SQL server service from SERVER A
• Copied all USER databases to SERVER B
• Attached all databases on SEREVR B

All went successful J .

Now while configuring REPLICATION I got error on server B

Error 208: Invaild object name ‘msdb.dbo.MSdistpublishers’

I understood the error was coming because databases were already published on SERVER A and not distributor was not found So I searched on internet and come to know I need to create two tables

USE msdb
GO

CREATE TABLE [MSdistributiondbs] (
[name] [sysname] NOT NULL ,
[min_distretention] [int] NOT NULL ,
[max_distretention] [int] NOT NULL ,
[history_retention] [int] NOT NULL
) ON [PRIMARY]
GO

CREATE TABLE [dbo].[MSdistpublishers] (
[name] [sysname] NOT NULL ,
[distribution_db] [sysname] NOT NULL ,
[working_directory] [nvarchar] (255) COLLATE
SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[security_mode] [int] NOT NULL ,
[login] [sysname] NOT NULL ,
[password] [nvarchar] (524) COLLATE
SQL_Latin1_General_CP1_CI_AS NULL ,
[active] [bit] NOT NULL ,
[trusted] [bit] NOT NULL ,
[thirdparty_flag] [bit] NOT NULL
) ON [PRIMARY]
GO

I done as per internet blogs suggestion which resolved the 208 ERROR but started a new error invalid column name ‘publisher_type’ error 207 , on executing sp_dropdistpublisher for which didin’t got success by searching on net so followed below steps

• Opened sp_dropdistpublisher stored procedure in master database and tried to add comment for ‘publisher_type’ , but SQL was not allowing to change system procedures
• As sql server was not allowing to work with system procedures I have added column as

publisher_type Varchar (50) in table MSdistpublishers table which was recently created by me.

• Added value for the same column as MSSQLSERVER
• And then tried to execute sp_dropdistpublisher and got success

Then newly configured distributor and implemented replication J

Источник

Hibernate, SQL Server 2016 = SQL Error: 207 — Invalid column name

my problem is that I have 2 schemas in SQL Server 2016, but with the same tables. I’ve altered both, and added 3 same columns each. But when hibernate wants to add new data to this altered tables it gives me an exception

And yes, name of columns matches the names added in @Column.

2 Answers 2

Problem#1:

Caused by: java.sql.SQLException: Invalid column name ‘claim_number’.

Issue Analysis:

If we check the column name, we will find that,

i) it contains underscore(«_»).

Solution#1:

Hibernate uses various type of naming strategy. It the column contains underscore, then we need to use the following naming strategy.

N.B: For checking the error, you can add the following properties in application.properties file. It will show sql in console and you can make decision. So please add it:

Problem#2:

Caused by: java.sql.SQLException: Invalid column name ‘claimnumber’.

Issue Analysis:

If we check the column name, we will find that,

i) it contains lowercase string. No underscore.

Solution#2:

Sometimes developers create a table with columns which contains only lowercase string. On that time we need to use another naming strategy of hibernate.

Источник

Sql server error 207

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

Answers

• Proposed as answer by Garth Jones MVP Tuesday, February 10, 2015 8:21 PM
• Marked as answer by Garth Jones MVP Saturday, March 7, 2015 3:42 PM

Step by Step Configuration Manager Guides > 2012 Guides | 2007 Guides | I’m on Twitter > ncbrady

Hi Niall and Torsten,

Installed in September of last year. Windows Server 2008 R2 Standard, SQL 2008 R2 SP2 (10.50.4000).

The text from the log reads:

Microsoft SQL Server reported SQL message 207, severity 16: [42S22][207][Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid column name ‘Distinguished_Name0’.

Please refer to your Configuration Manager documentation, SQL Server documentation, or the Microsoft Knowledge Base for further troubleshooting information.

Followed by:

Discovery Data Manager failed to process the discovery data record (DDR) «D:Program FilesMicrosoft Configuration Managerinboxesauthddm.boxadsu9110.DDR», because it cannot update the data source.

Possible cause: On a Primary site, it is probably a SQL Server problem.
Solution:
1. Review the immediately preceding status messages from this component about SQL Server errors.
2. Verify that this computer can reach the SQL Server computer.
3. Verify that SQL Server services are running.
4. Verify that the site can access the site database.
5. Verify that the site database, transaction log, and tempdb are not full.
6. Verify that there are at least 50 SQL Server user connections, plus 5 for each Configuration Manager Console.

If the problem persists, check the SQL Server error logs.

Possible cause: On a secondary site, Discovery Data Manager probably cannot write to a file on the site server, so check for low disk space on the site server.
Solution: Make more space available on the site server.

As far as I can tell the services are running, there is no disk space issue, the server can access the database, not sure about the logs or the connections.

Источник

MSSQLSERVER_207

Применимо к: SQL Server (все поддерживаемые версии)

Сведения

Объяснение

Возможны следующие причины возникновения этой ошибки запроса.

Имя столбца неправильно указано, либо столбец не существует ни в одной указанной таблице.

Параметры сортировки базы данных учитывают регистр, а регистр имени столбца, указанный в запросе, не совпадает с регистром столбца, определенного в таблице. Например, если столбец определен в таблице как LastName, а для базы данных используются параметры сортировки с учетом регистра, при выполнении запросов, в которых для этого столбца указано имя Lastname или lastname, возникнет ошибка 207, так как имена столбцов не совпадают.

Псевдоним столбца, определенный в предложении SELECT, упоминается в другом предложении, например WHERE или GROUP BY. Например, следующий запрос определяет псевдоним столбца Year в предложении SELECT и упоминает его в предложении GROUP BY.

Порядок логической обработки предложений запросов вызывает возвращение ошибки 207. Далее приводится порядок обработки.

WITH CUBE или WITH ROLLUP

Поскольку псевдоним столбца не определяется до обработки предложения SELECT, псевдоним неизвестен при обработке предложения GROUP BY.

Инструкция MERGE вызывает эту ошибку, если ссылается на столбцы в исходной таблице, но строки не возвращаются исходной таблицей в предложении WHEN NOT MATCHED BY SOURCE. Данная ошибка возникает из-за того, что невозможно обратиться к столбцам в исходной таблице, если запрос не возвратил строк. Например, предложение WHEN NOT MATCHED BY SOURCE THEN UPDATE SET TargetTable.Col1 = SourceTable.Col1 может стать причиной ошибки инструкции из-за недоступности столбца Col1 в исходной таблице.

Действие пользователя

Проверьте следующую информацию и исправьте инструкцию соответствующим образом.

Наличие имени столбца в таблице и правильность его указания. В следующем примере запрос к представлению каталога sys.columns возвращает все имена столбцов для этой таблицы.

Учет регистра в параметрах сортировки базы данных. Следующая инструкция возвращает параметры сортировки для указанной базы данных.

Аббревиатура CS в имени параметров сортировки означает, что учитывается регистр символов. Например, Latin1_General_CS_AS определяет параметры сортировки с учетом диакритических знаков и с учетом регистра. Измените имя столбца, чтобы оно совпадало с тем именем столбца, которое было определено в таблице, вплоть до регистра.

Неправильное упоминание псевдонима столбца. Измените инструкцию, повторив выражение, определяющее псевдоним, в соответствующем предложении или использовав производную таблицу. В следующем примере в предложении GROUP BY повторяются выражения, определяющие псевдоним Year .

В следующем примере производная таблица используется для того, чтобы сделать псевдоним доступным для других предложений в запросе. Следует заметить, что псевдоним Year определяется в предложении FROM, которое обрабатывается в первую очередь, что делает псевдоним доступным для использования в других предложениях запроса.

Источник

MSSQLSERVER_207

Applies to: SQL Server (all supported versions)

Details

Explanation

This query error can be caused by one of the following problems.

The column name is misspelled or the column does not exist in any of the specified tables.

The collation of the database is case-sensitive and the case of the column name specified in the query does not match the case of the column defined in the table. For example, when a column is defined in a table as LastName and the database uses a case-sensitive collation, queries that refer to the column as Lastname or lastname will cause error 207 to return because the column name does not match.

A column alias, defined in the SELECT clause, is referenced in another clause such as a WHERE or GROUP BY clause. For example, the following query defines the column alias Year in the SELECT clause and refers to it in the GROUP BY clause.

Due to the order in which query clauses are logically processed, the example returns error 207. The processing order is as follows:

WITH CUBE or WITH ROLLUP

Because a column alias is not defined until the SELECT clause is processed, the alias name is unknown when the GROUP BY clause is processed.

The MERGE statement raises this error when the clause references columns in the source table but no rows are returned by the source table in the WHEN NOT MATCHED BY SOURCE clause. The error occurs because the columns in the source table cannot be accessed when no rows are returned to the query. For example, the clause WHEN NOT MATCHED BY SOURCE THEN UPDATE SET TargetTable.Col1 = SourceTable.Col1 may cause the statement to fail if Col1 in the source table is inaccessible.

User Action

Verify the following information and correct the statement as appropriate.

The column name exists in the table and is spelled correctly. The following example queries the sys.columns catalog view to return all column names for a given table.

The case sensitivity of the database collation. The following statement returns the collation of the specified database.

The abbreviation CS in the collation name indicates the collation is case-sensitive. For example, Latin1_General_CS_AS is a case-sensitive and accent-sensitive collation. Modify the column name to match the case of the column name as it is defined in the table.

A column alias is referenced incorrectly. Modify the statement by repeating the expression that defines the alias in the appropriate clause or by using a derived table. The following example repeats the expressions that define the Year alias in the GROUP BY clause.

The following example uses a derived table to make the alias name available to other clauses in the query. Notice that the alias Year is defined in the FROM clause, which is processed first, and so makes the alias available for use in other clauses in the query.

Источник

Sql error number 207

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

Answers

• Proposed as answer by Garth Jones MVP Tuesday, February 10, 2015 8:21 PM
• Marked as answer by Garth Jones MVP Saturday, March 7, 2015 3:42 PM

All replies

Step by Step Configuration Manager Guides > 2012 Guides | 2007 Guides | I’m on Twitter > ncbrady

Hi Niall and Torsten,

Installed in September of last year. Windows Server 2008 R2 Standard, SQL 2008 R2 SP2 (10.50.4000).

The text from the log reads:

Microsoft SQL Server reported SQL message 207, severity 16: [42S22][207][Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid column name ‘Distinguished_Name0’.

Please refer to your Configuration Manager documentation, SQL Server documentation, or the Microsoft Knowledge Base for further troubleshooting information.

Followed by:

Discovery Data Manager failed to process the discovery data record (DDR) «D:Program FilesMicrosoft Configuration Managerinboxesauthddm.boxadsu9110.DDR», because it cannot update the data source.

Possible cause: On a Primary site, it is probably a SQL Server problem.
Solution:
1. Review the immediately preceding status messages from this component about SQL Server errors.
2. Verify that this computer can reach the SQL Server computer.
3. Verify that SQL Server services are running.
4. Verify that the site can access the site database.
5. Verify that the site database, transaction log, and tempdb are not full.
6. Verify that there are at least 50 SQL Server user connections, plus 5 for each Configuration Manager Console.

If the problem persists, check the SQL Server error logs.

Possible cause: On a secondary site, Discovery Data Manager probably cannot write to a file on the site server, so check for low disk space on the site server.
Solution: Make more space available on the site server.

As far as I can tell the services are running, there is no disk space issue, the server can access the database, not sure about the logs or the connections.

Источник

Sql error number 207

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

We have two databases in a sync. Sync working fine until changes.

We made changes to the source database removing a column from table A and moving it to table B.

Now the sync fails citing an unrelated column in table A that isn’t part of the sync rules.

«Sync failed with the exception «Cannot enumerate changes at the RelationalSyncProvider for table ‘dbo.tableA. Check the inner exception for any store-specific errors.Inner exception: SqlException Error Code: -2146232060 — SqlError Number:207, Message: Invalid column name ‘UnrelatedColumn’. » For more information, provide tracing ID ‘3db5d1a4-4ae9-4852-b0b7-fbb4a1f8708e’ to customer support.

Any insight as to where we should look for problems? We don’t really use the unrelated column, so I tried removing it from the database, and it’s not part of the sync rules, but still same error occurs.

Источник

Getting SQL Error 207 SQLSTATE = S0022

Anyone familiar with SQL Error 207 SQLSTATE = S0022

[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid column name server_version.

I just moved the database (mostly medical records) from SQL 2005 to SQL 2014 with user logins and passwords. Logins and passwords worked fine when i tested everything with EMR (advantx) software. I upgraded to newest version of advantx software and i get the error above.

Ransomware 3.0: Prep for A New Malicious Threat Level

Not 100% on this. Relatively new to SQL servers.

Have you spoken with advantx support? Usually this error is found on an invalid query or store procedure on the system. They probably have updated sql scripts and some new version of their system. Going from 2005 to 2014 is a big jump but they should be able to provide an answer.

15 Replies

Brand Representative for Microsoft

Not 100% on this. Relatively new to SQL servers.

Have you spoken with advantx support? Usually this error is found on an invalid query or store procedure on the system. They probably have updated sql scripts and some new version of their system. Going from 2005 to 2014 is a big jump but they should be able to provide an answer.

Yea I did actually, waiting to hear from them. What’s weird is that as soon as I update to their newest release , that’s when the error started. Before the update I checked multiple users logins and was able to login successfully. Ill wait to hear from them and see what they say.

The login is not the problem is what happens after the login that is causing the error.

Actually, the error happens at the login. Can’t get passed the login with the error: Invalid column name server_version. And this is after the upgrade of advantx to newest version. Before the upgrade , I can go in and pull up reports charts, etc np.

Yeah, I understand. It is something the program calls in the login process or just right after. Have you tried a different SQL ODBC connector to the new server?

I have not. I ll try that.

I got in touch with advantx people, as dbeato said, they need to make a script to fix it.

Nice, glad to hear it. Hopefully they can get this fixed for you.

I will update once everything is up and running.

I’m having this same issue — did you get a resolution?

Yes, several things. First, the database version didn’t match with the software as I recall. Second, all the SIDs for the users need to be moved over. Advantx have a tool for that so you can use that to move all the users over. You can call them and they can help you, if you still having trouble.

For me the solution was to use SQL management studio to manually run the SQL update — Issue then resolved.

This topic has been locked by an administrator and is no longer open for commenting.

To continue this discussion, please ask a new question.

Read these next.

SQL Injection.

Hi all,We have a super old legacy application built in asp, running on IIS with a SQL 2012 backend database and I have been asked to look at it as the business owner suspects its time to upgrade.We connect to it on http://cnameofapplicationDoes not even u.

Intermittent ping, wifi, printers

Hi,We have been having intermittent problems for over a month. I have limited networking experience. We are running Windows 2008 R2 servers in VMWare sessions. DC1 is our domain, DHCP and DNS server. At least twice a day, we will have problems: .

System-Root Full — 5230 Appliance

Before I begin, I know this appliance is EOL, but I need to keep it around for historical reasons. I have already reached out to support, they can’t help. I also have posted this on the VOX Community I have an issue with my 5230 appliance (I know it’s .

Snap! — Eyeless Telescope, John Deere Caves, AI-Simulated Voices, Flipper Zero

Your daily dose of tech news, in brief. Welcome to the Snap! Flashback: Back on January 10, 1938: Donald Ervin Knuth, best known for The Art of Computer Programming, is born (Read more HERE.) Bonus Flashback: Back on January 10, 1946: Rad.

Spark! Pro Series — 10 January 2023

Not a lot of tech history today. A few interesting space tidbits, and some great birthdays!Today in History: 10 January 1878 – US Senate proposes female suffrage 1901 – Oil discovered at Spindletop, Beaumont, ma.

Источник