Ошибка 56 application popup gigabyte

Event ID 56 is logged in Windows Server

This article provides help to fix Event ID 56 that’s logged in Windows Server.

Applies to: В Windows Server 2019, Windows Server 2016, Windows Server 2012 R2
Original KB number: В 2685788

Symptoms

Scenario 1

Two or more non-volatile memory expresses (NVMe) devices of the same make / model are attached to a Windows Server 2016 or Windows Server 2019-based computer.

Scenario 2

Multiple paths are available to a disk in Windows Server. In these scenarios, you receive event ID 56 in the System log.

Log Name: System
Source: Application Popup
Event ID: 56
Level: Error
Description: Driver SCSI returned invalid ID for a child device (000000).

Cause

The issue occurs because the Plug and Play (PnP) manager auto-generates unique instance IDs when duplicates are found.

Resolution

This event ID can safely be ignored, and no user action is required.

In Windows Server 2012 R2, and Windows Server 2016, you might see the event displayed but without the correct Description field, as shown below. However, the driver name and the child device name are correct and can be used to identify the driver involved and the name of the child device.

The description for Event ID 56 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event:

The message resource is present but the message is not found in the string/message table.

Источник

The Event ID 56 error is quite a common error that, unfortunately, keeps coming back. Luckily, several fixes will save your PC from a total shutdown. Since the users are encountering this error due to different reasons, we have mentioned ten easy fixes that you can try one by one.

What is Event ID 56?

This error is often accompanied by the entire computer shutting down or a Blue Screen of Death (BSOD). When you get the error, you will get a notification highlighting the log name, source, event ID, level, and description.

The description will tell you that a driver has returned an invalid ID for a particular child’s device. Both the driver’s and the child’s device will be mentioned. For instance, the description will tell you that the ACPI 5 driver is faulty. The report may appear differently in some versions of Windows, but the driver and child device mentioned will be the same.

Unfortunately, this error has many causes, which cannot be pinpointed from the error message alone. The error has been reported on Windows 10 Home, Pro, Server, and Windows 11, among others.

1. Update BIOS

Your first instinct should be to update the BIOS. An outdated BIOS can cause many system errors, including this error.

1. Identify the model number of your board. This can usually be found physically on the motherboard itself. For instance, your motherboard’s make and model may be Z170A Gaming Pro. Also, note down any revision numbers.
2. Identify the current BIOS version by pressing the Windows Key + R buttons. This will open the Run prompt. In this, type‘msinfo32.’
3. A System Information window will open. Select the System Summary option on the menu on the left and look under BIOS Version/Date. Note down the BIOS version and date.
4. Enter the BIOS by pressing the key mentioned on the screen during startup. Then, enter Advanced Mode. Also, plug in your USB to a working USB port. BIOS Settings
5. Here, you will find a utility such as ‘EZ Flash’, ‘Q Flash’, or another flash utility. It depends on the manufacturer of your motherboard. Click on it.
6. Select the USB drive on which you stored your BIOS file from the pop-up screen.
7. On the next screen, you’ll see the downloaded BIOS file. Double-click on the file. Select BIOS from the USB
8. On the pop-up prompt, click on Yes and then Yes again.
9. The BIOS will go through the update process and, upon updating, press Ok on the prompt.
10. Now, your computer will restart. Enter BIOS one more time and restart the computer.

2. Update Graphic And Video Drivers

This is a possible fix that has worked for many people. Updating the graphic and video drivers may help resolve the issue.

1. Search for ‘Device Manager’ in the search bar present on the taskbar. Then click on Device Manager.
2. You will see a list of different categories. Click on the arrow next to “Display adapters” to view the graphics and video cards. Update Drivers to Fix Event ID 56
3. Double-click on one of them and go to the Driver tab.
4. Here, click on the Update Driver button. Click on Update Driver, then OK.
5. Select ‘Search automatically for drivers’ (preferable). Or, if you have driver files installed, click on ‘Browse my computer for drivers.’
6. Wait for the computer to search for driver updates and install them if there are any.
7. Do the same for every graphics and video card (preferably).

If you prefer updating drivers through third-party applications, check out The 5 Best Driver Updater Software for Windows In 2022, which are safe to use.

3. Disable C-States And Enable Power Loading

If the above two fixes didn’t work, then this one might. You’ll need to disable C-states and enable Power Loading.

1. Go to the System Utilities screen by searching for it in the Start menu and select System Configuration.
2. Go to BIOS/Platform Configuration (RBSU) and select Power and Performance Options. C-State
3. Next, go to the C-State Efficiency Mode option and select Disable.
4. Save and move on to the next step.
5. Restart your PC and enter the BIOS by pressing the key shown on the start-up screen.
6. Go to the Power section and enable the Power Loading option.

4. Upgrade To Newer Hardware

Sometimes, backward incompatibility between your board and hardware devices may be the issue. This issue has been noted in the Startech USB 3.0 PEXUSB3S44V expansion card. But it may also be present in other hardware as well.

Upgrading to a newer version of the hardware may help resolve the issue. The problem may occur when the hardware’s driver and firmware are outdated. It may also happen when you install hardware from older PCs.

5. Manually Update ME Firmware

Another fix that may resolve the error is manually updating the ME firmware.

1. Download the latest version of Intel ME from the manufacturer of your motherboard’s website. Download the Latest Suitable Driver
2. Save the ME zip file in the OS folder.
3. Unzip the file and double-click on the MEUpdateTool.exe application. This will initiate the ME update.
4. It’s recommended to close any running apps in the background before proceeding to update. Then, click on Yes on the ME update tool prompt.
5. Once the update has finished installing, click on the OK button. This will restart your PC.
6. On the startup screen, press the key mentioned on the screen to enter BIOS.
7. Under Advanced Mode in the Main Menu, check for the ME FW Version and verify it’s the latest one.

6. Disable Unused Audio Devices

Another fix for the error is disabling unused audio devices. This fix will most likely work when you receive a Blue Screen of Death (BSOD) with other errors.

1. Search for device manager in your Taskbar’s search box and click on Device Manager.
2. Click on the arrow next to Audio inputs and outputs. Go to Properties of Audio inputs and outputs.
3. Double-click on the audio devices (speakers or microphones) that you’re not using.
4. Go over to the Driver tab and click on Disable Device. Click ‘Yes’ on the prompt. Disable the Unused Audio Device
5. The audio device has now been disabled.

7: Format Windows

Although this solution hasn’t worked for many people, it’s still worth a shot before going on to the next fixes. You’ll need to do a fresh reinstall of whatever version of Windows you’re running. Here’s the easiest way to reinstall Windows 10:

1. First, ensure you have backed up all of your data to an external drive or the cloud.
2. Go to the Start menu and click on Settings.
3. Then, go to the Update & Security section and select Recovery.
4. Find the ‘Reset this PC’ section and click “Get started.”Click Get Started
5. Click on ‘Remove Everything’ to make sure that all data wipe out. Again, ensure you have your data backed up.
6. Follow the steps to reinstall Windows 10.

Sometimes Microsoft Windows gives an error while formatting Windows. If you happen to come across that, then use Fix: Windows was Unable to Complete the Formatting to complete the task.

8. Get A New PSU

Finally, if all else fails, you can try to replace some key components, such as the PSU. The PSU is the Power Supply Unit and is sometimes the core cause of this error. It would help if you got it replaced with a new one. Or better yet, buy one from a different brand, so you don’t run into the issue again.

Your first step should be to identify what’s causing the problem. It could be your motherboard, PSU, or chipset. If you cannot tell through experimentation, you might need to send it to a computer repair store.

9. Replace The Motherboard

In some cases, the motherboard is faulty and needs to be replaced. It’s unlikely, but some inherent issues with specific motherboard models may cause the error. In particular, the Z170 board has been reported to have the Event ID 56 issue. However, other motherboards from the Z series and other manufacturers are also experiencing this error.

Go to a repair shop or manually try to find out if the motherboard is the issue. Then, replace it with a different make and model.

10. Replace The CPU

Sometimes, the CPU can also be a problem. Some users have found that their Intel Core i5 6600k was faulty and had to be replaced. Although CPU defects are rare, they are not impossible. Replacing the CPU with a new one or one from a different brand should be your last resort. And you should bring your computer into a repair shop to determine what’s causing the problem.

Источник

05 Feb 2022 в 20:28

05 Feb 2022 в 20:28 #1

Много текста, уж

Собственно обнаружил в событиях

Не удается найти описание для идентификатора события 56 из источника Application Popup. Вызывающий данное событие компонент не установлен на этом локальном компьютере или поврежден. Установите или восстановите компонент на локальном компьютере.

Если событие возникло на другом компьютере, возможно, потребуется сохранить отображаемые сведения вместе с событием.

К событию были добавлены следующие сведения:

Беглый осмотр гугла начал пугать, у людей с ней бсоды. меня пока пронесло.
Еще осмотр показал что трабл чаще всего на платах «Gigabyte» это сдвиг, но мне мало что дает.
Температуры в игрульках в норме, вылетов / зависаний падений фпс нет. нареканий к быстродействию пк пока что тоже.
Фирменная утилитка проверки ссд показала 95 процентов хп, 0 ошибок.
Сканирование системы восстановило только гадский game bar xbox мной же выпиленный.
Драйвера на карту, проц и т.д скачаны только сегодня (ос переустанавливал)

бп чифтек которому нет и полгода. маме буквально месяц — H410M H V3 (на что хватило) оп одна плашка на 8 hyperX fury
ЦП i3 12100 новый. вк 750 ti

Судя по времени, событие идет потоком при играх. но вылезает и в простое, раз в 10-15 минут.

Куда рыть по пути наименьшего сопротивления? боюсь на обычных ошибках история может не закончиться

Источник

Вопрос

Все ответы

Please refer to below links:

update motherboard and BIOS drivers as well.

Solution for Active Directory auditing, monitoring and management.

• Предложено в качестве ответа Eve Wang Microsoft contingent staff 12 сентября 2017 г. 7:00

How things are going there on this issue?

Please let me know if you would like further assistance.

Best Regards,
Eve Wang

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

I don’t know «multiple paths are available to a disk» description of Symptoms, is means what?

And I don’t understand the description of Cause.

Question1 about Cause description: The Storport driver will be create unique instance IDs for disks, whether this disk is SCSI device or not? Because I installed two PLX bridges, then I check PLX bridges downstream disk in Device Manager, the disk «Device instance path» will be show below image:

Question2 about Cause description:

I don’t know «disks exposed by multiple paths.» description of Cause, the multiple paths is means what?

Источник

The Event ID 56 error is quite a common error that, unfortunately, keeps coming back. Luckily, several fixes will save your PC from a total shutdown. Since the users are encountering this error due to different reasons, we have mentioned ten easy fixes that you can try one by one.

What is Event ID 56?

This error is often accompanied by the entire computer shutting down or a Blue Screen of Death (BSOD). When you get the error, you will get a notification highlighting the log name, source, event ID, level, and description.

The description will tell you that a driver has returned an invalid ID for a particular child’s device. Both the driver’s and the child’s device will be mentioned. For instance, the description will tell you that the ACPI 5 driver is faulty. The report may appear differently in some versions of Windows, but the driver and child device mentioned will be the same.

Unfortunately, this error has many causes, which cannot be pinpointed from the error message alone. The error has been reported on Windows 10 Home, Pro, Server, and Windows 11, among others.

1. Update BIOS

Your first instinct should be to update the BIOS. An outdated BIOS can cause many system errors, including this error.

1. Identify the model number of your board. This can usually be found physically on the motherboard itself. For instance, your motherboard’s make and model may be Z170A Gaming Pro. Also, note down any revision numbers.
2. Identify the current BIOS version by pressing the Windows Key + R buttons. This will open the Run prompt. In this, type ‘msinfo32.’
3. A System Information window will open. Select the System Summary option on the menu on the left and look under BIOS Version/Date. Note down the BIOS version and date.
4. Enter the BIOS by pressing the key mentioned on the screen during startup. Then, enter Advanced Mode. Also, plug in your USB to a working USB port.
5. Here, you will find a utility such as ‘EZ Flash’, ‘Q Flash’, or another flash utility. It depends on the manufacturer of your motherboard. Click on it.
6. Select the USB drive on which you stored your BIOS file from the pop-up screen.
7. On the next screen, you’ll see the downloaded BIOS file. Double-click on the file.
8. On the pop-up prompt, click on Yes and then Yes again.
9. The BIOS will go through the update process and, upon updating, press Ok on the prompt.
10. Now, your computer will restart. Enter BIOS one more time and restart the computer.

For HP and Lenovo users, we recommend following How to Update BIOS on A HP Desktop/Laptop and How to Update BIOS On Lenovo.  

2. Update Graphic And Video Drivers

This is a possible fix that has worked for many people. Updating the graphic and video drivers may help resolve the issue.

1. Search for ‘Device Manager’ in the search bar present on the taskbar. Then click on Device Manager.
2. You will see a list of different categories. Click on the arrow next to “Display adapters” to view the graphics and video cards.
3. Double-click on one of them and go to the Driver tab.
4. Here, click on the Update Driver button.
5. Select ‘Search automatically for drivers’ (preferable). Or, if you have driver files installed, click on ‘Browse my computer for drivers.’
6. Wait for the computer to search for driver updates and install them if there are any.
7. Do the same for every graphics and video card (preferably).

If you prefer updating drivers through third-party applications, check out The 5 Best Driver Updater Software for Windows In 2022, which are safe to use.

3. Disable C-States And Enable Power Loading

If the above two fixes didn’t work, then this one might. You’ll need to disable C-states and enable Power Loading. 

1. Go to the System Utilities screen by searching for it in the Start menu and select System Configuration.
2. Go to BIOS/Platform Configuration (RBSU) and select Power and Performance Options.
3. Next, go to the C-State Efficiency Mode option and select Disable.
4. Save and move on to the next step.
5. Restart your PC and enter the BIOS by pressing the key shown on the start-up screen.
6. Go to the Power section and enable the Power Loading option.

4. Upgrade To Newer Hardware

Sometimes, backward incompatibility between your board and hardware devices may be the issue. This issue has been noted in the Startech USB 3.0 PEXUSB3S44V expansion card. But it may also be present in other hardware as well.

Upgrading to a newer version of the hardware may help resolve the issue. The problem may occur when the hardware’s driver and firmware are outdated. It may also happen when you install hardware from older PCs.

5. Manually Update ME Firmware

Another fix that may resolve the error is manually updating the ME firmware.

1. Download the latest version of Intel ME from the manufacturer of your motherboard’s website.
2. Save the ME zip file in the OS folder.
3. Unzip the file and double-click on the MEUpdateTool.exe application. This will initiate the ME update.
4. It’s recommended to close any running apps in the background before proceeding to update. Then, click on Yes on the ME update tool prompt.
5. Once the update has finished installing, click on the OK button. This will restart your PC. 
6. On the startup screen, press the key mentioned on the screen to enter BIOS.
7. Under Advanced Mode in the Main Menu, check for the ME FW Version and verify it’s the latest one.

6. Disable Unused Audio Devices

Another fix for the error is disabling unused audio devices. This fix will most likely work when you receive a Blue Screen of Death (BSOD) with other errors.

1. Search for device manager in your Taskbar’s search box and click on Device Manager.
2. Click on the arrow next to Audio inputs and outputs.
3. Double-click on the audio devices (speakers or microphones) that you’re not using.
4. Go over to the Driver tab and click on Disable Device. Click ‘Yes’ on the prompt.
5. The audio device has now been disabled.

7: Format Windows

Although this solution hasn’t worked for many people, it’s still worth a shot before going on to the next fixes. You’ll need to do a fresh reinstall of whatever version of Windows you’re running. Here’s the easiest way to reinstall Windows 10:

1. First, ensure you have backed up all of your data to an external drive or the cloud.
2. Go to the Start menu and click on Settings.
3. Then, go to the Update & Security section and select Recovery.
4. Find the ‘Reset this PC’ section and click “Get started.”Click Get Started
5. Click on ‘Remove Everything’ to make sure that all data wipe out. Again, ensure you have your data backed up.
6. Follow the steps to reinstall Windows 10.

Sometimes Microsoft Windows gives an error while formatting Windows. If you happen to come across that, then use Fix: Windows was Unable to Complete the Formatting to complete the task.

8. Get A New PSU

Finally, if all else fails, you can try to replace some key components, such as the PSU. The PSU is the Power Supply Unit and is sometimes the core cause of this error. It would help if you got it replaced with a new one. Or better yet, buy one from a different brand, so you don’t run into the issue again.

Your first step should be to identify what’s causing the problem. It could be your motherboard, PSU, or chipset. If you cannot tell through experimentation, you might need to send it to a computer repair store.

9. Replace The Motherboard

In some cases, the motherboard is faulty and needs to be replaced. It’s unlikely, but some inherent issues with specific motherboard models may cause the error. In particular, the Z170 board has been reported to have the Event ID 56 issue. However, other motherboards from the Z series and other manufacturers are also experiencing this error.

Go to a repair shop or manually try to find out if the motherboard is the issue. Then, replace it with a different make and model.

10. Replace The CPU

Sometimes, the CPU can also be a problem. Some users have found that their Intel Core i5 6600k was faulty and had to be replaced. Although CPU defects are rare, they are not impossible. Replacing the CPU with a new one or one from a different brand should be your last resort. And you should bring your computer into a repair shop to determine what’s causing the problem.

Question

Issue: How to fix Event ID 56, Application Popup error in Windows?

Hello. I need help with the error on Windows 11 now. Event ID 56 bothers me. It shows up after every reboot and I have no idea where it comes from and how to deal with it properly. Can you help me learn about it is possibly solve the reason behind the problem?

Solved Answer

Event ID 56, Application Popup error in Windows is a common issue that keeps occurring. People complain about this and some of the reports online even state that their PC shutdowns and the issue remains unsolved and unexplained. users encounter the error for a few different reasons, however, and there are particular fixes for this.

This is the error that can often be accompanied by the computer reboot and shutdown and the Blue Screen of Death error^[1] that appears on the screen when the operating system tries to avoid corruption of the machine. These errors can often come with the error code that notifies about the log name or the level of the issue, indicating the driver that has been a trigger for the error.

Event ID 56, Application Popup error in Windows can show up when the river for the particular device is corrupted or is faulty. This application error can be related to BIOS and Firmware updates, river updates or formatting other parts of the Windows operating system.

Users^[2] have encountered these messages for years now. So these fixes are closely related to the problem that triggers it. Even though these errors appear on Windows 10 and Windows 11 even, upgrades of the OS and bugs there^[3] do not trigger in this issue.

It is possible to troubleshoot what issues caused the appearance of this Event ID 56, Application Popup error in Windows. Also, there are ways to quickly improve the performance, so this issue could be fixed easily. Applications like ReimageMac Washing Machine X9 can be launched to clear infection leftovers and treat problems related to corrupted or missing system files. other options are listed below and might take more time, but should help solve this issue and avoid permanent damage.

1. Run system file checker

2. Update BIOS

• Press the Windows Key + R buttons. This will open the Run prompt.
• In this, type msinfo32.
• A System Information window will open. Select the System Summary option on the menu on the left and look under BIOS Version/Date.
• Note down the BIOS version and date.
• Enter the BIOS by pressing the key mentioned on the screen during startup.
• Enter Advanced Mode.
• Plug in your USB to a working USB port.
• Here, you will find a utility such as EZ Flash, Q Flash, or another flash utility. It depends on the manufacturer of your motherboard. Click on it.
• Select the USB drive on which you stored your BIOS file from the pop-up screen.
• On the next screen, you’ll see the downloaded BIOS file.
• Double-click on the file.
• On the pop-up prompt, click on Yes and then Yes again.
• The BIOS will go through the update process and, upon updating, press Ok on the prompt.
• Enter BIOS one more time and restart the computer.

3. Update graphics or video drivers

4. Manually update ME firmware

• Download the latest version of Intel ME from the manufacturer of your motherboard’s website.
• Save the ME zip file in the OS folder.
• Unzip the file and double-click on the MEUpdateTool.exe application.
• Then, click on Yes on the ME update tool prompt.
• Once the update has finished installing, click on the OK button.
• On the startup screen, press the key mentioned on the screen to enter BIOS.
• Under Advanced Mode in the Main Menu
• Check for the ME FW Version and verify it’s the latest one.

5. Format Windows

Repair your Errors automatically

ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow: