Ошибка 618 алкотестер драгер

• Page 1
  ® Alcotest 6810 GB Breath Alcohol Screening Device with Datamanagement Operator Instructions for Use…

• Page 2: Table Of Contents

  Contents For your safety ……….3 Measuring limits .

• Page 3: For Your Safety

  For your safety Strictly follow the instructions for use Any use of the instrument requires full understanding and strict observation of these instruc- tions. The instrument is only to be used for the purposes specified herein. Maintenance Maintenance must only be performed by experts. We recommend that a service contract be obtained with Dräger Safety and that all repairs be carried out by them.

• Page 4: Intended Use

  Intended use For quick measurement of a person’s alcohol intoxication through measurement of the breath alcohol concentration. For mobile use with batteries. Preparation ® Alcotest 6810 GB is supplied with standard calibration by the manufacturer. The date of the last calibration can be found in the quick menu (page 18). Alcotest 6810…

• Page 5: What’s What

  What‘s what? Measuring instrument 1 Display 2 Menu button «UP» 3 «OK» button 4 Menu button «DOWN/MENU» 5 Communication port 6 Indicating LED Alcotest 6810 7 Mouthpiece receptacle…

• Page 6: Preparation

  Preparation Inserting the batteries Upon initial operation or if the battery symbol on the display indicates «empty». Gently press onto the lock of the battery compartment and remove cover. Observe correct polarity when inserting the batteries! Close battery cover. Batteries to be used 2 each 1.5 V Type Alkaline (Mignon, LR6, AA)

• Page 7: Fixing The Hand Strap

  Fixing the hand strap Insert the smaller loop into the hole in the housing. Thread the longer loop through the eyelet and pull through. Symbols and readings The breath alcohol value is measured in μg/100 ml. The result is displayed as «ZERO», PASS», «ALERT»…

• Page 8: Fitting The Mouthpiece

  Note: The symbols under the battery flap mean: Attention! Please con- sult the user instructions! Before changing batteries, please read the instructions. Buttons «OK»-button Confirms entries or selected functions. Button to switch instrument on and off. «DOWN» and «UP» Setting of values and selection of menu functions. Fitting the mouthpiece Open packaging.

• Page 9: Switching On And Off

  Switching on and off Switch on Keep — button pressed for approx. 1 second until start window is displayed. Alcotest 6810 GB Switch off Unless the device is at «READY» you are unable to turn the device off. Keep — button pressed.

• Page 10: Performing The Measurement

  — The person to be tested must provide the required minimum air volume of 1.2 L (factory setting). The exhaling breath flow must be constant for at least 2 seconds. Preparation Alcotest 6810 GB Insert new mouthpiece in the holder (page 8). Switch instrument on (page 9).

• Page 11
  After 2 seconds: the info screen or «WAIT» is indicated on the display. The info screen can also be viewed by pressing the — button. Close with the — button. WAIT ROAD — The instrument starts in the «ROAD» mode. To select other transport modes press the — button while «ROAD»…
• Page 12
  The following limits are activated for the different modes: AIR: ROAD: ZERO: < 4μg/100 ml ZERO: < 4μg/100 ml PASS: ≤ 9μg/100 ml PASS: < 31μg/100 ml ALERT: ≤ 35μg/100ml FAIL: > 9μg/100ml FAIL: ≥ 36μg/100 ml MARINE: RAIL: ZERO: < 4μg/100 ml ZERO: <…
• Page 13
  Performing the measurement Ask the test subject to blow evenly into the mouthpiece without interruption. A sufficient Blow flow is indicated by a continuous tone and a green light. While the sample is taken the display shows: «Blow» When the sampling was successful the green light is going to cease and the continuous tone is going to stop.
• Page 14
  Error in delivering the breath sample If the sampling volume is too low the display shows: «Insufficient Volume» Insufficient The horn sounds briefly and a red light flashes. Volume If the subject is unable or unwilling to provide a sample press the REFUSAL ? -button to complete the test with «REFUSAL»…

• Page 15: Further Measurement

  Further measurement If you select «Next Test» and press the — button a new measurement is going to be prepared. During the recovery period of the sensor (see “Technical data” on WAIT page 26) the display shows: «WAIT» Note: Switching the instrument off in the meantime does not reduce the waiting period! Removing the mouthpiece Push the mouthpiece out of the mouthpiece holder.

• Page 16: Menu

  Menu Activation Switch instrument on. While «WAIT», «ROAD», «READY» or «R.AIR» appears on the display the menu functions can then be called up. For quick menu press button shortly. — After leaving menu the data input routine starts again, incomplete tests are not stored. —…

• Page 17: Symbols On The Display

  Symbols on the display Menu Return to next higher menu level Menu item with sub-menu Open menu item Selected function Further items below the visible items Further items above the visible items Function Activated item Actual screen (1) of all screens (6)

• Page 18: Quick Menu

  Quick menu Last tests Back to measurement Last tests Display of the last test. Set contrast Last cal. date Back with — button. Set mode Accuracy check Last cal. date Display of last calibration date. Back with — button. Set mode Display for selection of the two different modes: —…

• Page 19: Set Mode

  When «Supply gas» is shown supply respective gas. A minimum flow rate of 3 L/min obtain «Gas flow ok» on display. Check value : 47.6 The instrument automatically performs the check. Result : 47.0 μg/100mL Unit : The result is displayed together with the check value. Set mode Enter «Set mode»…

• Page 20: Measuring Limits

  Measuring limits Limit Set mode μg/100 mL μg/100 mL μg/100 mL μg/100 mL μg/100 mL ≤9 ≥36 <4 <31 <36 ZERO PASS FAIL FAIL FAIL ROAD ZERO PASS PASS ALERT FAIL MARINE ZERO PASS PASS ALERT FAIL RAIL ZERO PASS PASS ALERT FAIL…

• Page 21: Maintenance

  Maintenance Maintenance intervals If necessary: Changing batteries, page 22. Every month: Check calibration. Storage ® The Alcotest 6810 GB consumes a small amount of current even when switched off. Therefore remove the batteries from the instrument during long periods without use. Note: In case of long storage periods Remove batteries from instrument, if the instrument is not used for more than 6 months to avoid damage to the instrument caused by leaking battery acid.

• Page 22: Cleaning

  Cleaning Do not submerge in liquid – liquid must not enter the sockets! To clean: — wipe with a disposable tissue. do not use cleaning agents containing alcohol or solvents. Changing batteries If the battery symbol on the display indicates «empty», change the batteries. Gently press onto the lock of the battery compartment and remove cover.

• Page 23: Disposal Of The Instrument

  Caution: Used batteries — Do not expose to fire, — Do not recharge, — Do not force open. Danger of explosion! Only dispose of as special waste, in accordance with local waste disposal regulations. Infor- mation can be obtained from environmental agencies and from waste disposal companies. Disposal of the instrument —…

• Page 24: Fault, Cause, Remedy

  Fault, Cause, Remedy Fault Cause Remedy Instrument switches automatically off. batteries discharged. replace batteries, page 22. Instrument has been left ready for measure- ment for more than 4 minutes. Instrument automatically leaves menu-mode Instrument has an automatically switch off of Reselect menu item.

• Page 25
  WARNING Fault in display Cause Remedy «Accuracy check overdue lockout in X Accuracy check intervall expired. Device is Download and clear datalogger. Perform days» useable until graceperiode is expired. accuracy check. «Service required Accuracy period expired. Download and clear datalogger. Perform Accuracy check»…

• Page 26: Technical Data

  Technical data Measuring principle Electrochemical sensor Measurement range Breath alcohol concentra- 0 to 250 μg/100mL tion (Ethanol-Mass per breath volume at C and1013 hPa.) Display range Display range is identical to measuring range. If the result is exceeding the measuring range the display will show three arrows «↑…

• Page 27
  Measurement accuracy Reproducibility with an ethanol standard up to 50 μg/100 mL 0.8 μg/100 mL or ≥ 50 μg/100 mL 1.7 % of measurement value the higher value is valid up to 1.00 ‰ 0.017 ‰ or ≥ 1.00 ‰ 1.7 % of measurement value the higher value is valid Sensitivity drift…

• Page 28: Order List

  Order list Name and Description Part no. ® Alcotest 6810 GB 83 18 570 Order number GB (33 10 860) Accessories Mouth-pieces hygienically tested 100 pieces 68 10 690 250 pieces 68 10 825 1000 pieces 68 10 830 Alkaline battery (1 piece) 13 35 804 Rechargable battery NiMH (1 piece) 18 90 092…

• Page 29: Index

  Index Accessories ……… 3 Intended use .

• Page 30
  Safety ……….. 3 Sample conditions .
• Page 32
  Dräger Safety AG & Co. KGaA Revalstraße 1 D-23560 Lübeck Germany +49 451 8 82- 0 Tel. +49 451 8 82- 20 80 www.draeger.com 90 23 973 — GA 4754.500 en © Dräger Safety AG & Co. KGaA 2nd edition — August 2007 Subject to alteration…

• Page 1
  ® Alcotest 6810 GB Breath Alcohol Screening Device with Datamanagement Operator Instructions for Use…

• Page 2: Table Of Contents

  Contents For your safety ……….3 Measuring limits .

• Page 3: For Your Safety

  For your safety Strictly follow the instructions for use Any use of the instrument requires full understanding and strict observation of these instruc- tions. The instrument is only to be used for the purposes specified herein. Maintenance Maintenance must only be performed by experts. We recommend that a service contract be obtained with Dräger Safety and that all repairs be carried out by them.

• Page 4: Intended Use

  Intended use For quick measurement of a person’s alcohol intoxication through measurement of the breath alcohol concentration. For mobile use with batteries. Preparation ® Alcotest 6810 GB is supplied with standard calibration by the manufacturer. The date of the last calibration can be found in the quick menu (page 18). Alcotest 6810…

• Page 5: What’s What

  What‘s what? Measuring instrument 1 Display 2 Menu button «UP» 3 «OK» button 4 Menu button «DOWN/MENU» 5 Communication port 6 Indicating LED Alcotest 6810 7 Mouthpiece receptacle…

• Page 6: Preparation

  Preparation Inserting the batteries Upon initial operation or if the battery symbol on the display indicates «empty». Gently press onto the lock of the battery compartment and remove cover. Observe correct polarity when inserting the batteries! Close battery cover. Batteries to be used 2 each 1.5 V Type Alkaline (Mignon, LR6, AA)

• Page 7: Fixing The Hand Strap

  Fixing the hand strap Insert the smaller loop into the hole in the housing. Thread the longer loop through the eyelet and pull through. Symbols and readings The breath alcohol value is measured in μg/100 ml. The result is displayed as «ZERO», PASS», «ALERT»…

• Page 8: Fitting The Mouthpiece

  Note: The symbols under the battery flap mean: Attention! Please con- sult the user instructions! Before changing batteries, please read the instructions. Buttons «OK»-button Confirms entries or selected functions. Button to switch instrument on and off. «DOWN» and «UP» Setting of values and selection of menu functions. Fitting the mouthpiece Open packaging.

• Page 9: Switching On And Off

  Switching on and off Switch on Keep — button pressed for approx. 1 second until start window is displayed. Alcotest 6810 GB Switch off Unless the device is at «READY» you are unable to turn the device off. Keep — button pressed.

• Page 10: Performing The Measurement

  — The person to be tested must provide the required minimum air volume of 1.2 L (factory setting). The exhaling breath flow must be constant for at least 2 seconds. Preparation Alcotest 6810 GB Insert new mouthpiece in the holder (page 8). Switch instrument on (page 9).

• Page 11
  After 2 seconds: the info screen or «WAIT» is indicated on the display. The info screen can also be viewed by pressing the — button. Close with the — button. WAIT ROAD — The instrument starts in the «ROAD» mode. To select other transport modes press the — button while «ROAD»…
• Page 12
  The following limits are activated for the different modes: AIR: ROAD: ZERO: < 4μg/100 ml ZERO: < 4μg/100 ml PASS: ≤ 9μg/100 ml PASS: < 31μg/100 ml ALERT: ≤ 35μg/100ml FAIL: > 9μg/100ml FAIL: ≥ 36μg/100 ml MARINE: RAIL: ZERO: < 4μg/100 ml ZERO: <…
• Page 13
  Performing the measurement Ask the test subject to blow evenly into the mouthpiece without interruption. A sufficient Blow flow is indicated by a continuous tone and a green light. While the sample is taken the display shows: «Blow» When the sampling was successful the green light is going to cease and the continuous tone is going to stop.
• Page 14
  Error in delivering the breath sample If the sampling volume is too low the display shows: «Insufficient Volume» Insufficient The horn sounds briefly and a red light flashes. Volume If the subject is unable or unwilling to provide a sample press the REFUSAL ? -button to complete the test with «REFUSAL»…

• Page 15: Further Measurement

  Further measurement If you select «Next Test» and press the — button a new measurement is going to be prepared. During the recovery period of the sensor (see “Technical data” on WAIT page 26) the display shows: «WAIT» Note: Switching the instrument off in the meantime does not reduce the waiting period! Removing the mouthpiece Push the mouthpiece out of the mouthpiece holder.

• Page 16: Menu

  Menu Activation Switch instrument on. While «WAIT», «ROAD», «READY» or «R.AIR» appears on the display the menu functions can then be called up. For quick menu press button shortly. — After leaving menu the data input routine starts again, incomplete tests are not stored. —…

• Page 17: Symbols On The Display

  Symbols on the display Menu Return to next higher menu level Menu item with sub-menu Open menu item Selected function Further items below the visible items Further items above the visible items Function Activated item Actual screen (1) of all screens (6)

• Page 18: Quick Menu

  Quick menu Last tests Back to measurement Last tests Display of the last test. Set contrast Last cal. date Back with — button. Set mode Accuracy check Last cal. date Display of last calibration date. Back with — button. Set mode Display for selection of the two different modes: —…

• Page 19: Set Mode

  When «Supply gas» is shown supply respective gas. A minimum flow rate of 3 L/min obtain «Gas flow ok» on display. Check value : 47.6 The instrument automatically performs the check. Result : 47.0 μg/100mL Unit : The result is displayed together with the check value. Set mode Enter «Set mode»…

• Page 20: Measuring Limits

  Measuring limits Limit Set mode μg/100 mL μg/100 mL μg/100 mL μg/100 mL μg/100 mL ≤9 ≥36 <4 <31 <36 ZERO PASS FAIL FAIL FAIL ROAD ZERO PASS PASS ALERT FAIL MARINE ZERO PASS PASS ALERT FAIL RAIL ZERO PASS PASS ALERT FAIL…

• Page 21: Maintenance

  Maintenance Maintenance intervals If necessary: Changing batteries, page 22. Every month: Check calibration. Storage ® The Alcotest 6810 GB consumes a small amount of current even when switched off. Therefore remove the batteries from the instrument during long periods without use. Note: In case of long storage periods Remove batteries from instrument, if the instrument is not used for more than 6 months to avoid damage to the instrument caused by leaking battery acid.

• Page 22: Cleaning

  Cleaning Do not submerge in liquid – liquid must not enter the sockets! To clean: — wipe with a disposable tissue. do not use cleaning agents containing alcohol or solvents. Changing batteries If the battery symbol on the display indicates «empty», change the batteries. Gently press onto the lock of the battery compartment and remove cover.

• Page 23: Disposal Of The Instrument

  Caution: Used batteries — Do not expose to fire, — Do not recharge, — Do not force open. Danger of explosion! Only dispose of as special waste, in accordance with local waste disposal regulations. Infor- mation can be obtained from environmental agencies and from waste disposal companies. Disposal of the instrument —…

• Page 24: Fault, Cause, Remedy

  Fault, Cause, Remedy Fault Cause Remedy Instrument switches automatically off. batteries discharged. replace batteries, page 22. Instrument has been left ready for measure- ment for more than 4 minutes. Instrument automatically leaves menu-mode Instrument has an automatically switch off of Reselect menu item.

• Page 25
  WARNING Fault in display Cause Remedy «Accuracy check overdue lockout in X Accuracy check intervall expired. Device is Download and clear datalogger. Perform days» useable until graceperiode is expired. accuracy check. «Service required Accuracy period expired. Download and clear datalogger. Perform Accuracy check»…

• Page 26: Technical Data

  Technical data Measuring principle Electrochemical sensor Measurement range Breath alcohol concentra- 0 to 250 μg/100mL tion (Ethanol-Mass per breath volume at C and1013 hPa.) Display range Display range is identical to measuring range. If the result is exceeding the measuring range the display will show three arrows «↑…

• Page 27
  Measurement accuracy Reproducibility with an ethanol standard up to 50 μg/100 mL 0.8 μg/100 mL or ≥ 50 μg/100 mL 1.7 % of measurement value the higher value is valid up to 1.00 ‰ 0.017 ‰ or ≥ 1.00 ‰ 1.7 % of measurement value the higher value is valid Sensitivity drift…

• Page 28: Order List

  Order list Name and Description Part no. ® Alcotest 6810 GB 83 18 570 Order number GB (33 10 860) Accessories Mouth-pieces hygienically tested 100 pieces 68 10 690 250 pieces 68 10 825 1000 pieces 68 10 830 Alkaline battery (1 piece) 13 35 804 Rechargable battery NiMH (1 piece) 18 90 092…

• Page 29: Index

  Index Accessories ……… 3 Intended use .

• Page 30
  Safety ……….. 3 Sample conditions .
• Page 32
  Dräger Safety AG & Co. KGaA Revalstraße 1 D-23560 Lübeck Germany +49 451 8 82- 0 Tel. +49 451 8 82- 20 80 www.draeger.com 90 23 973 — GA 4754.500 en © Dräger Safety AG & Co. KGaA 2nd edition — August 2007 Subject to alteration…

Неисправность №66770 — Алкотестер Inspector

Горит индикатор CAL. Необходима калибровка

г. Москва

3.02.2023 в 12:40

Неисправность №65456 — Алкотестер

Показывает не правильно всегда по 00, можно ли сделать диагностику или не стоит совсем ремонтировать

г. Иваново

20.01.2023 в 11:35

Неисправность №63326 — Алкотестер

Алкотестер Hunter PROFESSIONAL+ требуется калибровка

г. Тольятти

26.12.2022 в 19:19

Неисправность №57607 — Алкотестер Inspector

Где во Владивостоке можно откалибровать алкотестер Inspector AT750. И сколько стоит. В пользовании уже больше года.

г. Владивосток

28.10.2022 в 07:31

Неисправность №57564 — Алкотестер

Алкометр Lion 500 (Ошибка: Код 16)

г. Владивосток

27.10.2022 в 15:39

Неисправность №56340 — Алкотестер

Добрый вечер! Хотела бы уточнить, производите ли Вы ремонт алкотестера Динго а-025?

г. Балашиха

13.10.2022 в 22:12

Неисправность №54429 — Алкотестер

Алкотектор Марк V. Начинаешь продувать в воронку,никакой реакции

г. Иркутск

21.09.2022 в 05:15

Неисправность №54284 — Алкотестер

Алкотестер драгер 6820

г. Мурманск

19.09.2022 в 15:20

Неисправность №54281 — Алкотестер

Алкотестер аппарат драгер 6820

г. Мурманск

19.09.2022 в 15:05

Неисправность №52962 — Алкотестер

Алкотестер не показывает наличие алкоголя

г. Павлодар

5.09.2022 в 07:43

Неисправность №50774 — Алкотестер

Инспектор АТ-850. Калибровка.

г. Воронеж

11.08.2022 в 17:12

Неисправность №43317 — Алкотестер

Сломался алкотестер,постоянно показывает 0.0

г. Москва

21.05.2022 в 12:41

Неисправность №37116 — Алкотестер

Не работает алкотестер ,показывает неправильный результат

г. Энгельс

3.01.2022 в 20:03

Неисправность №29050 — Алкотестер

Алкотестер ParkCity Sober 5 нужна калибровка или,скорее всего, замена сенсора.

г. Череповец

27.05.2021 в 18:26

Неисправность №28025 — Алкотестер

Алкотестер не включается. Может включиться, но с 30 нажатие. На кнопку включения.

г. Москва

26.04.2021 в 10:53