-
wlyons
- Posts: 1
- Joined: Sat Apr 04, 2009 7:51 pm
input/output error
most of the time when trying to download anything early on it’ll just stop and say input/output error, I tried downloading the newest nightly to see if that helped but it still won’t work. I’m using transmission 1.51+ (8133) and mac osx 10.5.6.
-
piranesi
- Posts: 5
- Joined: Fri Jan 02, 2009 1:25 pm
Re: input/output error
Post
by piranesi » Sun May 03, 2009 7:36 pm
Same here.
I use 1.52 on a headless machine. Downloads start and pause after approx. 5min. «input/output error»
What’s going wrong can I check a log?
Thank you.
-
rb07
- Posts: 1400
- Joined: Sun Aug 24, 2008 3:14 am
Re: input/output error
Post
by rb07 » Sun May 03, 2009 7:51 pm
piranesi wrote:I use 1.52 on a headless machine. Downloads start and pause after approx. 5min. «input/output error»
What’s going wrong can I check a log?
There’s no log, if you want to see more info then run the daemon as foreground process and look at the output on your terminal.
Code: Select all
sudo -u <user> transmission-daemon -f <other options>
Fill in the user and options you usually use.
Input/output error could be as simple as «full file system», check the partition where your downloads are stored (i.e. df -kh); are you using a NAS? you didn’t specify a download dir… and run it as root (home happens to be on the flash disk).
-
temp123
- Posts: 3
- Joined: Wed May 20, 2009 11:10 pm
Re: input/output error
Post
by temp123 » Wed May 20, 2009 11:30 pm
Same Happened with me. i tried to do the method of copying (Copy the whole directory in another folder then start transmission then start the same torrent to download it. then after it starts fresh download then stop the download/transmission and go to that folder and delete new folder from disk and keep or paste the old one… then start the transmission, it verifies the data and starts downloading from the point which it gave error from), i used this technique but still it gave error message (input/output) eventually got the solution, import the download file folder from Ktorrent every thing will work fine… because when i tried to import those file with transmission it imported all right but when you start it again it shows the error. Ktorrent is the solution without any harm…..
-
cka23
- Posts: 2
- Joined: Thu May 28, 2009 2:55 am
Re: input/output error
Post
by cka23 » Thu May 28, 2009 3:14 am
I’m using Transmission 1.61 on a Mac: OS X 10.5.7
I’m having the same problems, the input/output error is stopping the download more and more frequently the closer it gets to the end. I’m not super computer savvy, so I don’t really understand what the other posts say on how to fix it… Lay person terms please?!
-
Zorchenhimer
- Posts: 1
- Joined: Thu Jun 18, 2009 8:00 am
Re: input/output error
Post
by Zorchenhimer » Thu Jun 18, 2009 8:07 am
I’m having the same problem here.
Ubuntu 9.10 (2.6.28-13-generic kernel)
Transmission 1.71
I have a torrent stuck at 96.03% with an «Input/Output» error. I’ve checked the logs and the only thing that remains consistent with this error is a failed checksum. Disk space is not an issue, as I have other torrents downloading just fine (and I’ve also checked the available space, almost 40Gig). I would try a nightly build, except that the computer I’m using transmission on is old, slow, and lacks the proper libraries. So far I have not been able to reproduce the error. Any help on this would be awesome.
-
Gui13
- Posts: 3
- Joined: Sat Jun 06, 2009 4:45 pm
Re: input/output error
Post
by Gui13 » Thu Jun 18, 2009 9:22 am
I’d guess for bad permissions on the files?
ls -la *yourfile* gives what?
-
rb07
- Posts: 1400
- Joined: Sun Aug 24, 2008 3:14 am
Re: input/output error
Post
by rb07 » Thu Jun 18, 2009 5:18 pm
Zorchenhimer wrote: the only thing that remains consistent with this error is a failed checksum.
Where do you see the failed checksum? When this happens usually the piece is just downloaded again, from somewhere else if the error repeats and if possible (but if there is only one seeder …) Do you see that there is a «Corrupt DL»? using ‘transmission-remote -t # -i’ where # is the number of the specific torrent (as listed by transmission-remote -l).
I/O error is usually a file system error. You could try stopping the download, make a copy of the downloaded files, switch copies, and start downloading (the daemon will verify first). The point of all that dancing is to work around file system corruption (yes, you could also run an fsck, but in a live system is not reliable you would have to reboot and fsck at boot time).
-
kamikaze
- Posts: 1
- Joined: Sun Jun 21, 2009 4:28 pm
Re: input/output error
Post
by kamikaze » Sun Jun 21, 2009 4:32 pm
I got the same problem. I’m running transmission 1.72 on my Mac osx 10.5.7 and the closer my download goes to the end, the more frequently the input/output error occurs. I have to «resume selected» every 60 seconds, my download got 99,81% and this method is absolutely unuseable.
-
jacketcase
- Posts: 2
- Joined: Fri Jun 26, 2009 6:14 pm
Re: input/output error
Post
by jacketcase » Thu Sep 17, 2009 12:21 am
I had the same thing happen to me tonight. The clue was that the download kept pausing at 99%. I believe that when a transfer reaches 100%, Transmission copies (not moves) the files from the «partial» folder to the «completed» folder. Here are some things to check:
(1) Does the Torrent you’re downloading contain any extremely large files? Does your hard drive’s format support files that large?
For example, FAT32 hard drives, like External drives, cannot support files over 4 GB. This means that if you’re downloading a 4.4 GB file, and the «partial» folder is on a drive that uses «HFS+», also called «HFS Plus» or «Mac OS Extended Format», and that the «complete» folder is on an external drive that uses «FAT32», the copy operation will most likely fail. This might be unlikely for most people, but it’s something to check.
(2) Do you have enough free space on your drive?
If your 400 MB download is almost complete, but you only have 300 MB free space after the download reaches 99%, a second copy of the file cannot be created.
Either of the above might cause this problem, but it still did not fix it for me. Any other ideas?
-
iamse7en
- Posts: 7
- Joined: Thu May 28, 2009 8:08 am
Re: input/output error
Post
by iamse7en » Mon Oct 12, 2009 2:25 am
Mine started having the same issue. It was with an external hard drive, and after restarting my computer, that very hard drive isn’t showing up on my mac anymore. I wonder if the hard drive is failing, and if the input/output error I was getting was somehow related to it?
-
jose88eric
- Posts: 1
- Joined: Mon Dec 21, 2009 11:34 pm
Re: input/output error
Post
by jose88eric » Tue Dec 22, 2009 12:09 am
(am from mexico so SORRY FOR MY BAD ENGLISH) OK so, i was having the same problem, my torrent stopped at 99.94% of downloading 13.9GB of a VideoGame
so it just didnt download after this… so, this is the way o git the problem solve.
i found another torrent with the same discs than the FAILED 99% torrent and.. i change the discs from the first torrent folder to the new torrent folder
then transmission just starting checking the torrent and updating the download until the 99.94% and then it starts downloaging the file… ok so for you to understand what i did, ill try to explain it with some name files…
torrent_1_gta4: disc1.iso disc2.iso readme.rtf <——- this one failed at 99.94%
torrent_2_gta4: disc1.iso disc2.iso leeme.rtf readme.rtf Crack.rtf <——- this is the one i search for After the first one Droped the Job…
so i grab the files Disc1.iso Disc2.iso from the folder torrent_1_gta4 and paste them into folder Torrent_2_gta4.
then transmission check the torrent and updates the download downloading the las %missing from the files
so you just need another torrent that contains the same files that u r already downloading and u can finish your download without RE DOWNLOADING all the files Again
Any Question to my E mail or PM @Forum, Thank you and sorry if it was already posted.
-
essiw
- Posts: 567
- Joined: Sat Aug 23, 2008 10:40 am
- Location: the Netherlands
Re: input/output error
Post
by essiw » Tue Dec 22, 2009 12:14 pm
jose88eric which version of Transmission are you using?
View previous topic :: View next topic |
||||||
Author | Message | |||||
---|---|---|---|---|---|---|
S0k0l777 DD-WRT Novice Joined: 16 Dec 2009 |
|
|||||
Back to top |
|
|||||
Sponsor | ||||||
slimer DD-WRT User Joined: 29 Jul 2009 |
|
|||||
Back to top |
|
|||||
yozz DD-WRT User Joined: 23 Nov 2009 |
|
|||||
Back to top |
|
|||||
S0k0l777 DD-WRT Novice Joined: 16 Dec 2009 |
|
|||||
Back to top |
|
|||||
kenzo DD-WRT User Joined: 28 Feb 2009 |
|
|||||
Back to top |
|
|||||
SaintReset DD-WRT Guru Joined: 13 Jan 2009 |
|
|||||
Back to top |
|
|||||
|
Navigation
You cannot post new topics in this forum |
на из сайта трансмишена на параметрах настроек ConfigurationParameters preallocation Number 1 0 = Off, 1 = Fast, 2 = Full (slower but reduces disk fragmentation) а по поводу Как сделать дефрагментацию? п.с.если что не так. поправьте меня |
Страница 1 из 1 | [ Сообщений: 2 ] |
Часовой пояс: UTC + 3 часа
Кто сейчас на форуме
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 5
Источник
ВНИМАНИЕ. ВНИМАНИЕ. ВНИМАНИЕ.
Страницы Назад 1 … 8 9 10 11 12 … 16 Далее
Чтобы отправить ответ, вы должны войти или зарегистрироваться
Сообщений [ с 226 по 250 из 386 ]
226 Ответ от alex-chem 2012-11-28 08:58:28
- alex-chem
- New member
- Неактивен
- Зарегистрирован: 2012-11-01
- Сообщений: 9
Re: Transmission
но проблемы со скоростью и постоянным реконектом Remote GUI не исчезла
Может настроили чего неправильно. Используйте transmission из заводской прошивки.
Заводской будет стабильнее (5Гб за 1.5 часа и ничего не реконектилось). еще раз спасибо.
Отредактировано alex-chem (2012-11-28 08:59:02)
227 Ответ от Divinorum 2012-12-01 12:16:40
- Divinorum
- Member
- Неактивен
- Откуда: Donbass-City
- Зарегистрирован: 2011-06-07
- Сообщений: 115
Re: Transmission
Error: Unable to save resume file: Input/output error
Error: No data found! Ensure your drives are connected or use «Set Location». To re-download, remove the torrent and re-add it.
Error: Unable to save resume file: No such file or directory
и так на половине торрентов после обновления,скрипт останавливал,но запустил со старым конфигом.
свободного места 45 гиг.
думал нашел решение. скопировал папку torrents из transa по одному удалил который с ошибкой.нахожу этот торрент и добавляю на закачку. начинается верификация проц.100% нагрузки 3 мин . и та же ошибка.
и это все по моему после update и обновления базы minidlna.
Zyxmon подскажите куда копать . неужели хана всему что нажито не посильным трудом)
Отредактировано Divinorum (2012-12-01 13:24:05)
228 Ответ от flomaster-0@yandex.ru 2012-12-01 19:33:51
- flomaster-0@yandex.ru
- New member
- Неактивен
- Зарегистрирован: 2012-12-01
- Сообщений: 6
Re: Transmission
Редактировал settings.json и чуток запутался
«download-dir»: «/media/DISK_A1/transmission/downloads
«incomplete-dir»: «/media/DISK_A1/transmission/downloads
Может такое быть что эти два пути совпадают ?
Прошивка у меня кастом http://forum.ixbt.com/topic.cgi?id=14:57251:715#715
В Transmission у меня такие файлы и папки — blocklists ,downloads,resume,torrents,torrentwatch. stats и settings.json.
Отредактировано flomaster-0@yandex.ru (2012-12-01 19:34:24)
229 Ответ от Dr.Acid 2012-12-01 20:57:47
- Dr.Acid
- Member
- Неактивен
- Зарегистрирован: 2011-11-03
- Сообщений: 1,971
Re: Transmission
«download-dir»: «/media/DISK_A1/transmission/downloads
«incomplete-dir»: «/media/DISK_A1/transmission/downloads
Может такое быть что эти два пути совпадают ?
Почему-бы и нет? Под Виндой, в uTorrent, это запросто бывает, думаю, и трансмишн может так, другое дело, что это не всегда удобно. Я бы лучше сделал их разными.
230 Ответ от moonlight 2012-12-05 10:11:05
- moonlight
- Member
- Неактивен
- Зарегистрирован: 2012-11-20
- Сообщений: 81
Re: Transmission
Трансмишн 2.72 качает с резкими перепадами скорости.
300, 1,4, 700, 120,1,4.
Можно это как-то настроить?
Отредактировано moonlight (2012-12-05 10:12:14)
231 Ответ от Zyxmon 2012-12-05 12:49:24
- Zyxmon
- Administrator
- Неактивен
- Зарегистрирован: 2008-12-07
- Сообщений: 5,567
Re: Transmission
moonlight, для начала попробуйте отключить utp. Дальше изучать параметры — https://trac.transmissionbt.com/wiki/EditConfigFiles
Как настроите — результат сюда.
232 Ответ от moonlight 2012-12-05 18:57:11
- moonlight
- Member
- Неактивен
- Зарегистрирован: 2012-11-20
- Сообщений: 81
Re: Transmission
Спасибо!
Значит до меня не настроили..
Отредактировано moonlight (2012-12-05 18:57:34)
233 Ответ от flomaster-0@yandex.ru 2012-12-08 04:19:52
- flomaster-0@yandex.ru
- New member
- Неактивен
- Зарегистрирован: 2012-12-01
- Сообщений: 6
Re: Transmission
Трансмишн 2.61 тоже качает с резкими перепадами.
HDD-ext2
234 Ответ от Zyxmon 2012-12-08 08:54:53
- Zyxmon
- Administrator
- Неактивен
- Зарегистрирован: 2008-12-07
- Сообщений: 5,567
Re: Transmission
flomaster-0@yandex.ru, это из заводской прошивки? Тогда в тему http://forum.zyxmon.org/topic165-proble … netic.html
Я еще посоветую отключить DHT.
235 Ответ от flomaster-0@yandex.ru 2012-12-08 09:12:59
- flomaster-0@yandex.ru
- New member
- Неактивен
- Зарегистрирован: 2012-12-01
- Сообщений: 6
Re: Transmission
Zyxmon, это -V1.06.RU.NDMS
То есть получается что выключаю всё ?
«dht-enabled»: false,
«lpd-enabled»: false,
«pex-enabled»: false,
«utp-enabled»: false,
236 Ответ от Zyxmon 2012-12-08 09:18:29
- Zyxmon
- Administrator
- Неактивен
- Зарегистрирован: 2008-12-07
- Сообщений: 5,567
Re: Transmission
Эту версию, если и имеет смысл обсуждать, то в теме на ixbt. Все параметры transmission описаны на родном сайте — pex оставить, lpd — в зависимости от способа подключения к инету. Откуда мне знать — есть ли у Вас локальные пиры.
Кроме этого есть еще родной форум transmission — там можно на ангельском задать вопрос.
237 Ответ от Харви 2012-12-12 00:17:18
- Харви
- Member
- Неактивен
- Зарегистрирован: 2012-10-24
- Сообщений: 20
Re: Transmission
Столкнулся с непонятной ситуацией.
Системный монитор Кинетика стал показывать, что память вся использована и файл подкачки заканчивается.
Команда top показала много запущенных /media/DISK_A1/system/usr/bin/transmission .
Я набрал /media/DISK_A1/system/etc/init.d/S90transmissiond stop .
Память освободилась, но несколько процессов transmission остались и он продолжает работать!
Как такое может быть?
Встроенный transmission выключен.
238 Ответ от moonlight 2012-12-12 16:41:29
- moonlight
- Member
- Неактивен
- Зарегистрирован: 2012-11-20
- Сообщений: 81
Re: Transmission
Пробовал включать и выключать dht-enabled lpd-enabled pex-enabled
utp-enabled, кеш ставил 2,4,6, 8 — результат тот же.
Скорость закачки скачкообразна.
Наверное сделан трансмишн 2.72 так.
239 Ответ от imalv26 2012-12-12 22:11:36
- imalv26
- Member
- Неактивен
- Зарегистрирован: 2012-04-15
- Сообщений: 104
Re: Transmission
в ork установил transmission даю команду
K90transmissiond /media/DISK_A1/system/etc/init.d/S90transmissiond
в ответ:-ash: K90transmissiond: not found
проверил папку init.d там файл K90transmissiond есть, переименовую в ручную S90transmissiond
даю КОМАНДУ:/media/Dransmission ISK_A1/system/etc/init.d/S90transmissiond start
в ответ: Starting Tdaemon.
/media/DISK_A1/system/root #
зайти через вебинтерфейс немогу, даю команду:top
и вижу transmission нет следи запущених
240 Ответ от Dr.Acid 2012-12-12 22:57:20
- Dr.Acid
- Member
- Неактивен
- Зарегистрирован: 2011-11-03
- Сообщений: 1,971
Re: Transmission
imalv26, читайте http://forum.zyxmon.org/post7279.html#p7279 и дальше несколько постов до понимания.
241 Ответ от nikitids 2012-12-15 13:56:37
- nikitids
- New member
- Неактивен
- Зарегистрирован: 2012-12-12
- Сообщений: 8
Re: Transmission
День добрый.
Установил и настроил transmission, все работает, однако есть одна проблемка.
Функция torrentwatch не работает. Точнее, файлы, выложенные в эту папку, подхватываются только при рестарте transmission. В процессе же работы демона ничего не происходит. Может есть какие-либо кейсы по решению данной проблемы. Рестартить все время демон все же не самый гуманный вариант. Может как-то через cron это решается?
Отредактировано nikitids (2012-12-15 13:58:15)
242 Ответ от Zyxmon 2012-12-15 13:59:38
- Zyxmon
- Administrator
- Неактивен
- Зарегистрирован: 2008-12-07
- Сообщений: 5,567
Re: Transmission
nikitids, на настоящих кинетиках (и гига) все работает при правильной настройке. И с заводской версией transmission (обращайтесь в ИСК) и с версией из пакетов.
All Сегодня положил в репозиторий версию 2.74. Не забываем остановить демона перед обновлением.
243 Ответ от Dr.Acid 2012-12-15 17:20:09
- Dr.Acid
- Member
- Неактивен
- Зарегистрирован: 2011-11-03
- Сообщений: 1,971
Re: Transmission
День добрый.
Установил и настроил transmission, все работает, однако есть одна проблемка.
Функция torrentwatch не работает. Точнее, файлы, выложенные в эту папку, подхватываются только при рестарте transmission.
У вас, часом, не кинетик 4ж будет(или Лайт )?
На них эта функция не поддерживается, из-за отсутствия поддержки inotify в ядре.
244 Ответ от moonlight 2012-12-16 10:18:51
- moonlight
- Member
- Неактивен
- Зарегистрирован: 2012-11-20
- Сообщений: 81
Re: Transmission
Нужна ли такая строка
«peer-congestion-algorithm»: «lp» ?
Есть tcp_lp в Кинетике?
modprobe tcp_lp не узнаешь, за не имением команды..
245 Ответ от Zyxmon 2012-12-16 10:29:54
- Zyxmon
- Administrator
- Неактивен
- Зарегистрирован: 2008-12-07
- Сообщений: 5,567
Re: Transmission
246 Ответ от nikitids 2012-12-17 23:53:42
- nikitids
- New member
- Неактивен
- Зарегистрирован: 2012-12-12
- Сообщений: 8
Re: Transmission
День добрый.
Установил и настроил transmission, все работает, однако есть одна проблемка.
Функция torrentwatch не работает. Точнее, файлы, выложенные в эту папку, подхватываются только при рестарте transmission.
У вас, часом, не кинетик 4ж будет(или Лайт )?
На них эта функция не поддерживается, из-за отсутствия поддержки inotify в ядре.
Нет, обычный. Не 4ж и не лайт.
Более того, сколько помню эта функция не работала, в том числе на встроенном в прошивку клиенте.
Есть предположение, что torrentwatch не вполне корректно работает с примонтированными дисками (у меня прикручен к роутеру через cifs). Однако, Zyxmon, уверят, что «все работает при правильной настройке». Увы, опытном путем не получилось установить, что же у меня неправильно.
247 Ответ от Dr.Acid 2012-12-18 00:56:46
- Dr.Acid
- Member
- Неактивен
- Зарегистрирован: 2011-11-03
- Сообщений: 1,971
Re: Transmission
На USB всё должно работать — это факт. Никаких особых настроек для этого не нужно — только torrentwatch. Как на cifs — не знаю. Я никак не мог это проверить, т.к. использовал cifs только на Лайте, у которого torrentwatch не будет работать по любому. Возможно, что и на простом кинетике не будет(хотя, в это мало верится). А что мешает вам попробовать с USB — будет работать, или нет?
248 Ответ от Zyxmon 2012-12-18 07:05:57
- Zyxmon
- Administrator
- Неактивен
- Зарегистрирован: 2008-12-07
- Сообщений: 5,567
Re: Transmission
не вполне корректно работает с примонтированными дисками
Возможно — гуглите на тему работы notify на примонтированных сетевых ресурсах. С usb носителями работает на заводской прошивке уже очень давно.
249 Ответ от nikitids 2012-12-18 23:44:21
- nikitids
- New member
- Неактивен
- Зарегистрирован: 2012-12-12
- Сообщений: 8
Re: Transmission
На USB всё должно работать — это факт. Никаких особых настроек для этого не нужно — только torrentwatch. Как на cifs — не знаю. Я никак не мог это проверить, т.к. использовал cifs только на Лайте, у которого torrentwatch не будет работать по любому. Возможно, что и на простом кинетике не будет(хотя, в это мало верится). А что мешает вам попробовать с USB — будет работать, или нет?
На самом деле вариант с USB мне не так интересен. 1) Обычный кинетик это только usb 2.0, и таких скоростей хватает далеко не для всех задач. 2) Недавно подарили Seagate GoFlex Desk с GoFlex Net приставкой (с тех пор и начались мои мытарства), и появилась возможность доступа к диску через сеть, что в разы быстрее. Более того, в диск встроен сервис позволяющий через спец сервис (Pogoplug) получить доступ к диск с любого компьютера имеющего доступ в интернет.
В теории, если бы torrentwatch работал корректно, я бы смог ставить на загрузку торренты даже находясь за пределами дома. Ради этого все и затевалось
Отредактировано nikitids (2012-12-18 23:47:45)
250 Ответ от Zyxmon 2012-12-19 07:06:31
- Zyxmon
- Administrator
- Неактивен
- Зарегистрирован: 2008-12-07
- Сообщений: 5,567
Re: Transmission
nikitids, лучше ищите как научить Ваш сигейт самостоятельно качать торренты. Качать на него с кинетика через cifs боооольшое извращение.
PS Чего Вам мешает пробросить порт управление transmission и с работы через него им управлять. Или через openvpn? Я использую последнее.
Сообщений [ с 226 по 250 из 386 ]
Страницы Назад 1 … 8 9 10 11 12 … 16 Далее
Чтобы отправить ответ, вы должны войти или зарегистрироваться
На основе PunBB, при поддержке Informer Technologies, Inc.
Источник
Adblock
detector
|
#21 |
Member Регистрация: 23.04.2014 Сообщений: 63 Вес репутации: 0 |
С настройкой демона transmission в общем и целом я разобрался. Качает как и положено ночью с 0:00 до 8:00.
Последний раз редактировалось AndreyNag; 26.06.2014 в 17:33.
|
|
|
|
#22 |
Junior Member Регистрация: 27.01.2014 Сообщений: 26 Вес репутации: 0 |
что-то стала меня донимать такая ошибка Цитата: Error: Unable to save resume file: Input/output error Спасает только перезапуск. В очереди по одному файлу. Самба отключена, люся отключена, да короч все отключено кроме качалки |
|
|
|
#23 |
Senior Member
|
levaclaus, тоже мучает. Буквально позавчера нашел решение. Тупо удалил этот файл и перекачал. Код: option preallocation 2
__________________
Последний раз редактировалось amod-cccp; 22.10.2014 в 22:52.
|
|
|
|
#24 |
Senior Member
|
В общем ответ здесь.
__________________ |
|
|
|
#25 |
Junior Member Регистрация: 27.01.2014 Сообщений: 26 Вес репутации: 0 |
слил содержимое веника на комп, форматнул, вернул содержимое с компа ан веник. Подключил, день прошел — полет нормальный. Походу действительно глюк на венике
Последний раз редактировалось levaclaus; 24.10.2014 в 21:23.
|
|
|
|
#26 |
Junior Member Регистрация: 22.03.2015 Сообщений: 1 Вес репутации: 0 |
подскажите почему после /etc/config/transmission отказывает в доступе к файлу |
|
|
|
#27 |
Junior Member Регистрация: 21.07.2013 Сообщений: 19 Вес репутации: 0 |
Подскажите как настроить роутер чтобы transmissionачал по расписанию. Ограничения 3g интернета, безлимит только с 1.00 до 07.00. |
|
|
|
#28 |
Administrator
|
Мне кроме как cron на ум ничего не приходит |
|
|
|
#29 |
Junior Member Регистрация: 21.07.2013 Сообщений: 19 Вес репутации: 0 |
Цитата:
Сообщение от Admin Мне кроме как cron на ум ничего не приходит То есть Transmission Command Line надо изучать. А торрент файлы предварительно скачав, нужно класть в определенную папку. |
|
|
|
#30 |
Junior Member Регистрация: 17.12.2016 Сообщений: 9 Вес репутации: 0 |
люди, помогите пожалуйста!!! роутер 1520 с перепаяной с 4 на 8 мб флешкой. и прошит на cyberwrt. нужна торент качалка. но то что описано сдесь этот как египетские иероглефы !!! ни слова не понятно |
|
|
Трансмишн 2.61 тоже качает с резкими перепадами.
HDD-ext2
"alt-speed-down": 50,
"alt-speed-enabled": false,
"alt-speed-time-begin": 540,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": false,
"alt-speed-time-end": 1020,
"alt-speed-up": 128,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": false,
"blocklist-url": "http://www.example.com/blocklist",
"cache-size-mb": 4,
"dht-enabled": true,
"download-dir": "/media/DISK_A1/transmission/downloads",
"download-queue-enabled": true,
"download-queue-size": 3,
"encryption": 0,
"idle-seeding-limit": 30,
"idle-seeding-limit-enabled": true,
"incomplete-dir": "/media/DISK_A1/transmission/incomplete",
"incomplete-dir-enabled": true,
"lpd-enabled": false,
"message-level": 1,
"open-file-limit": 16,
"peer-congestion-algorithm": "lp",
"peer-limit-global": 15,
"peer-limit-per-torrent": 10,
"peer-port": 52400,
"peer-port-random-high": 65535,
"peer-port-random-low": 49152,
"peer-port-random-on-start": false,
"peer-socket-tos": "default",
"pex-enabled": false,
"port-forwarding-enabled": false,
"preallocation": 2,
"prefetch-enabled": 0,
"queue-stalled-enabled": true,
"queue-stalled-minutes": 30,
"ratio-limit": 5,
"ratio-limit-enabled": true,
"rename-partial-files": true,
"rpc-authentication-required": true,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "{b68530dce6bf55de55aa3fe91b845aedb0069c06ruStzsd0",
"rpc-port": 9091,
"rpc-url": "/transmission/",
"rpc-username": "admin",
"rpc-whitelist": "*.*.*.*",
"rpc-whitelist-enabled": true,
"scrape-paused-torrents-enabled": true,
"script-torrent-done-enabled": false,
"script-torrent-done-filename": "",
"seed-queue-enabled": false,
"seed-queue-size": 10,
"speed-limit-down": 2000,
"speed-limit-down-enabled": true,
"speed-limit-up": 500,
"speed-limit-up-enabled": true,
"start-added-torrents": true,
"trash-original-torrent-files": true,
"umask": 2,
"upload-slots-per-torrent": 14,
"utp-enabled": false,
"watch-dir": "/media/DISK_A1/transmission/torrentwatch",
"watch-dir-enabled": true