Outlast как изменить fov

We had high hopes for Outlast, and it hasn’t failed to deliver.

The horror packed indie experience has managed to get a lot of attention from the community and is doing a great job. The game has been developed using the famous Unreal Engine 3 which means that the game is open to various tweaks PC gamers might like to apply to enhance the experience.

Like many other games, these tweaks will be based on the config files. The alteration brought into these files bring the desired results. However, if you are new to the tweaks thingy, it’s better for you to make a backup of the original file before applying any changes.

In these config files, you can find the concerned parameters by using “Ctrl+F”. You don’t have to search the complete parameter, just the name without its value will be fine.

Now, let’s get to different tweaks related Outlast.

#1 Outlast – How to Change FOV
Field of View is a common tweak that PC gamers like to alter depending on their choice. Being an Unreal Engine 3 game, Outlast allows you customize it with great ease. You need to find the file named “OLGame.ini” and open it using the text editor. Now, you need to find the following commands:

DefaultFOV=xx.x
RunningFOV=xx.x

“x” represents the value of FOV you want to go with. So, just change the numbers and save the changes to make it effective.

#2 Outlast – How to Change Camera Based FOV
If camera view doesn’t seem satisfactory, you can also change it in the same config file (“OLGame.ini”). The parameters you are looking to change are:

CamcorderNVMaxFOV=xx.x
CamcorderMaxFOV=xx.x

#3 Outlast – How to Remove FPS Cap
In the file “OLEngine.ini”, you will be able to find the following parameters:

bSmoothFrameRate=x
MinSmoothedFrameRate=xx
MaxSmoothedFrameRate=xx

You need to change the first parameter to false and rest to “0” to remove the FPS cap. By default, the FPS are set around 60 but if you use this tweak, you can get higher frames depending on how good your PC is.

#4 Outlast – How to Fix Stuttering
First, if it has been a while, you should perform defragment for your hard drive to improve the experience. You can also try the following tweaks for better performance:

In the file named “OLEngine.ini”, you will find pool size under Texture Streaming. You can vary that pool size depending on the amount of RAM you have got. If you have got 4gb or above, you can keep it to 1024 or above. You may have to try different values to get a better experience. If 1024 isn’t doing good, change it to 560. “TimeBetweenPurgingPendingKillObjects” is another parameter you can use to better things up. Set it to 3600 and see the difference.

#5 Outlast – How to Remove Motion Blur
In the file “OLSystemSettings.ini”, you are looking for the following parameters:

MotionBlur=x
MotionBlurPause=x
MotionBlurSkinning=x
AllowRadialBlur=x
MaxFilterBlurSampleCount=x
MobilePostProcessBlurAmount=x

You can change the values above as follows:

MotionBlur=FALSE
MotionBlurPause=FALSE
MotionBlurSkinning=0
AllowRadialBlur=FALSE
MaxFilterBlurSampleCount=8
MobilePostProcessBlurAmount=16.0

#6 Outlast – How to Improve Textures
For better textures, again open the “OLEngine.ini” file. Find the following parameters:

MaxProcBuildingLODColorTextureSize=xxxx
MaxProcBuildingLODLightingTextureSize=xxx

You can change the values as following:

MaxProcBuildingLODColorTextureSize=2048
MaxProcBuildingLODLightingTextureSize=1024

Again, if these values don’t give you satisfactory results, you can alter them accordingly.

#7 Outlast – How to Enable MSAA
Open the “OLSystemSettings.ini” file this time and find the following parameters:

MaxMultiSamples=x
bAllowD3D9MSAA=x

You should change these values to:

MaxMultiSamples=2
bAllowD3D9MSAA=True

For MaxMultiSamples, you can choose higher values as 4, 6 or 8.

#8 Outlast – How to Improve Shadows
If you want shadows in the game to look darker and richer, you can use the following simple tweaks:

In “OLSystemSettings.ini”, find the following commands:

MinShadowResolution=xx
MaxShadowResolution=xxxx
MaxWholeSceneDominantShadowResolution=xxxx

You should change the values as following:

MinShadowResolution=32
MaxShadowResolution=4096
MaxWholeSceneDominantShadowResolution=4096

#9 Outlast – How to Improve Mouse Response
In “OLSystemSettings.ini” file, find the following parameter:

OneFrameThreadLag=x

And make sure that it has been changed to False.

OneFrameThreadLag=False

#10 Outlast – How to Change Battery Life
You can also the change the time your battery will last in the game. How? It’s simple:

Open the “OlGame.ini” file in the config folder and then look for the following parameter:

BatteryDuration=xxx.x

By default, it’s set to 150.0; you can change it to whatever value you like.

Don’t forget to share any other tweaks that you found helpful by commenting below!

We had high hopes for Outlast, and it hasn’t failed to deliver.

The horror packed indie experience has managed to get a lot of attention from the community and is doing a great job. The game has been developed using the famous Unreal Engine 3 which means that the game is open to various tweaks PC gamers might like to apply to enhance the experience.

Like many other games, these tweaks will be based on the config files. The alteration brought into these files bring the desired results. However, if you are new to the tweaks thingy, it’s better for you to make a backup of the original file before applying any changes.

In these config files, you can find the concerned parameters by using “Ctrl+F”. You don’t have to search the complete parameter, just the name without its value will be fine.

Now, let’s get to different tweaks related Outlast.

#1 Outlast – How to Change FOV
Field of View is a common tweak that PC gamers like to alter depending on their choice. Being an Unreal Engine 3 game, Outlast allows you customize it with great ease. You need to find the file named “OLGame.ini” and open it using the text editor. Now, you need to find the following commands:

DefaultFOV=xx.x
RunningFOV=xx.x

“x” represents the value of FOV you want to go with. So, just change the numbers and save the changes to make it effective.

#2 Outlast – How to Change Camera Based FOV
If camera view doesn’t seem satisfactory, you can also change it in the same config file (“OLGame.ini”). The parameters you are looking to change are:

CamcorderNVMaxFOV=xx.x
CamcorderMaxFOV=xx.x

#3 Outlast – How to Remove FPS Cap
In the file “OLEngine.ini”, you will be able to find the following parameters:

bSmoothFrameRate=x
MinSmoothedFrameRate=xx
MaxSmoothedFrameRate=xx

You need to change the first parameter to false and rest to “0” to remove the FPS cap. By default, the FPS are set around 60 but if you use this tweak, you can get higher frames depending on how good your PC is.

#4 Outlast – How to Fix Stuttering
First, if it has been a while, you should perform defragment for your hard drive to improve the experience. You can also try the following tweaks for better performance:

In the file named “OLEngine.ini”, you will find pool size under Texture Streaming. You can vary that pool size depending on the amount of RAM you have got. If you have got 4gb or above, you can keep it to 1024 or above. You may have to try different values to get a better experience. If 1024 isn’t doing good, change it to 560. “TimeBetweenPurgingPendingKillObjects” is another parameter you can use to better things up. Set it to 3600 and see the difference.

#5 Outlast – How to Remove Motion Blur
In the file “OLSystemSettings.ini”, you are looking for the following parameters:

MotionBlur=x
MotionBlurPause=x
MotionBlurSkinning=x
AllowRadialBlur=x
MaxFilterBlurSampleCount=x
MobilePostProcessBlurAmount=x

You can change the values above as follows:

MotionBlur=FALSE
MotionBlurPause=FALSE
MotionBlurSkinning=0
AllowRadialBlur=FALSE
MaxFilterBlurSampleCount=8
MobilePostProcessBlurAmount=16.0

#6 Outlast – How to Improve Textures
For better textures, again open the “OLEngine.ini” file. Find the following parameters:

MaxProcBuildingLODColorTextureSize=xxxx
MaxProcBuildingLODLightingTextureSize=xxx

You can change the values as following:

MaxProcBuildingLODColorTextureSize=2048
MaxProcBuildingLODLightingTextureSize=1024

Again, if these values don’t give you satisfactory results, you can alter them accordingly.

#7 Outlast – How to Enable MSAA
Open the “OLSystemSettings.ini” file this time and find the following parameters:

MaxMultiSamples=x
bAllowD3D9MSAA=x

You should change these values to:

MaxMultiSamples=2
bAllowD3D9MSAA=True

For MaxMultiSamples, you can choose higher values as 4, 6 or 8.

#8 Outlast – How to Improve Shadows
If you want shadows in the game to look darker and richer, you can use the following simple tweaks:

In “OLSystemSettings.ini”, find the following commands:

MinShadowResolution=xx
MaxShadowResolution=xxxx
MaxWholeSceneDominantShadowResolution=xxxx

You should change the values as following:

MinShadowResolution=32
MaxShadowResolution=4096
MaxWholeSceneDominantShadowResolution=4096

#9 Outlast – How to Improve Mouse Response
In “OLSystemSettings.ini” file, find the following parameter:

OneFrameThreadLag=x

And make sure that it has been changed to False.

OneFrameThreadLag=False

#10 Outlast – How to Change Battery Life
You can also the change the time your battery will last in the game. How? It’s simple:

Open the “OlGame.ini” file in the config folder and then look for the following parameter:

BatteryDuration=xxx.x

By default, it’s set to 150.0; you can change it to whatever value you like.

Don’t forget to share any other tweaks that you found helpful by commenting below!

Overview

✔ In this guide, I’ll show you how to use the “Free Camera” in this game, change FOV, remove Grain Filter, etc.✔ В данном руководстве я расскажу вам как использовать “свободную камеру” в игре, а также как поменять угол обзора, как избавиться от эффекта зернистости и многое другое.► It’s important – You will change in-game files, so in order to avoid problems later, pre make copies of the files that are going to change.► Важно – Вам придется изменять внутриигровые файлы, так что во избежание проблем в дальнейшем, предварительно сделайте копии тех файлов, что собираетесь изменять.

Change FOV

● Go to “OLGame.ini” (located in My Documents / My Games / Outlast / OLGame / Config), open it, look for “DefaultFOV=” and “RunningFOV=”, defaultfov is by default at 90 but is not the 90 that all we now, it is like 65, so to get like 90 you have to write:

DefaultFOV=110.0
RunningFOV=120.0

This is like FOV 90 in other games

IMPORTANT – When you look through your camera you have the old defalut FOV, so to change the default Camera FOV, change this parameters:

CamcorderNVMaxFOV=83.0
CamcorderMaxFOV=83.0

TO this:

CamcorderNVMaxFOV=110.0
CamcorderMaxFOV=110.0

Note – you can go higher or lower if you want.

╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾

• В конфиг файлах игры ищем файл “OLGame.ini”, открываем его, находим “DefaultFOV=” и “RunningFOV=”. Стандартный FOV стоит 90, но это не тот 90 который нам всем знаком, это где то 65, итак чтобы поменять его на 90 нужно прописать следующее:

DefaultFOV=110.0
RunningFOV=120.0

Важно – Когда ты смотришь в камеру FOV по прежнему остается стандартным, чтобы поменять его нужно изменить следующие параметры:

CamcorderNVMaxFOV=83.0
CamcorderMaxFOV=83.0

Изменить на:

CamcorderNVMaxFOV=110.0
CamcorderMaxFOV=110.0

Примечание – Вы можете сделать и больше, на ваше усмотрение.

Remove “Motion Blur”

● Open “OLSystemSettings.ini”, change this:

MotionBlur=True
MotionBlurPause=True
MotionBlurSkinning=1

To this:

MotionBlur=False
MotionBlurPause=False
MotionBlurSkinning=0

╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾

• Убираем эффект размытости. Открываем “OLSystemSettings.ini” и меняем эти параметры:

MotionBlur=True
MotionBlurPause=True
MotionBlurSkinning=1

Должно выглядеть так:

MotionBlur=False
MotionBlurPause=False
MotionBlurSkinning=0

Change Resolution

● In “OLSystemSettings.ini”, look for:

ResX=
ResY=

Change it to whatever you want (800×600, 1920×1080, 3840×2160, etc)

For Example:

ResX=1920
ResY=1080

╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾

• Меняем разрешение. В “OLSystemSettings.ini” находим параметры:

ResX=
ResY=

Меняем разрешение на какое вам угодно (800×600, 1920×1080, 3840×2160, и т.д)

Например:

ResX=1920
ResY=1080

Change “Battery Life”

● Go to “OlGame.ini” and change this:

BatteryDuration=150.0
to the desired value. I think it is measured in seconds, so 150 seconds.

For Example:

BatteryDuration=300.0
I think 300 sec. is enough.

╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾

• Меняем время разряда батареи. В файле “OlGame.ini” меняем параметр:

BatteryDuration=150.0
Скорее всего 150 это секунды, ставим любое количесто секунд на свое усмотрение.

Например:

BatteryDuration=300.0
Лично мне хватает и 300 сек.

Remove “Grain Filter”

● Go to: C:Program Files (x86)SteamSteamAppscommonOutlastEngineConfig

Then open “ConsoleVariables.ini” and underneath “[Startups]” write: “ImageGrain = 0.0” or the desired value.

So it looks like:

[Startup]
ImageGrain = 0.0

╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾

• Убираем эффект зернистости. Проходим по пути: C:Program Files (x86)SteamSteamAppscommonOutlastEngineConfig

Затем открываем файл “ConsoleVariables.ini”, ищем раздел “[Startups]” и под ним находим параметр “ImageGrain =”, меняем на нужное вам значение.
(0.0 – полностью убирает зернистость)

Т.е. это должно выглядеть так:

[Startup]
ImageGrain = 0.0

Note: This method is not working now.
But you can try to use these methods ↓
[link] (This removes not only the grain but other effects too)
[link] (This method, I haven’t tried)
╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾
Внимание: Этот метод теперь не работает.
Но вы можете попытаться попробовать другие способы (ссылки чуть выше).

UE3 Commands (Free Camera, Remove FOG, Tiledshot, etc)

● Open “OLInput.ini” (located in My Documents / My Games / Outlast / OLGame / Config) and add the code below to the sections called [GameFramework.DebugCameraInput] and [OLGame.OLPlayerInput]:

Bindings=(Name=”Multiply”,Command=”Tiledshot 5″)
Bindings=(Name=”NumPadOne”,Command=”Camera Freecam”)
Bindings=(Name=”NumPadTwo”,Command=”Camera Default”)
Bindings=(Name=”NumPadThree”,Command=”Show FOG”)
Bindings=(Name=”NumPadFour”,Command=”Show POSTPROCESS”)
Bindings=(Name=”NumPadFive”,Command=”Show LEVELCOLORATION”)
Bindings=(Name=”PageUp”,Command=”SET MATERIALEFFECT bShowInGame FALSE”)
Bindings=(Name=”PageDown”,Command=”SET MATERIALEFFECT bShowInGame TRUE”)

╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾╾╾╼╼╼╼╼╼╼╾╾╾╾

• Проходим по пути My Documents / My Games / Outlast / OLGame / Config
Открываем файл “OLInput.ini”, находим разделы [GameFramework.DebugCameraInput] и [OLGame.OLPlayerInput], и прямо под ними прописываем следующие бинды:

Bindings=(Name=”Multiply”,Command=”Tiledshot 5″)
Bindings=(Name=”NumPadOne”,Command=”Camera Freecam”)
Bindings=(Name=”NumPadTwo”,Command=”Camera Default”)
Bindings=(Name=”NumPadThree”,Command=”Show FOG”)
Bindings=(Name=”NumPadFour”,Command=”Show POSTPROCESS”)
Bindings=(Name=”NumPadFive”,Command=”Show LEVELCOLORATION”)
Bindings=(Name=”PageUp”,Command=”SET MATERIALEFFECT bShowInGame FALSE”)
Bindings=(Name=”PageDown”,Command=”SET MATERIALEFFECT bShowInGame TRUE”)

Примечание – некоторые команды могут не работать в новых версиях игры. Лично я пользовался только свободной камерой и убирал туман. Интересной является команда “Show LEVELCOLORATION”, она показывает каким выглядел уровень изначально (т.е. на стадии разработки)

Screenshots