Содержание
- Cannot install SCIPY for Python 3.4 using PIP #7221
- Comments
- Pip scipy install error
- ModuleNotFoundError: No module named ‘scipy’ in Python #
- Conclusion #
- I fail to install Scipy by pip, can you help me? #5995
- Comments
- Failed To Install SciPy On Windows with Python 3.9 #12923
- Comments
- Не удается установить Scipy через pip
- 21 ответов:
- командная строка
Cannot install SCIPY for Python 3.4 using PIP #7221
Hello, I have managed to install Python 3.4, and Numpy using PIP install.
For some reason, I cannot get scipy to install/run properly. I use ‘pip install scipy’ , and I get the following error below.
Can someone advise? My machine is 64-bit Windows 10.
C:Python34>pip install scipy
Collecting scipy
Using cached scipy-0.19.0.zip
Installing collected packages: scipy
Running setup.py install for scipy . error
Complete output from command c:python34python.exe -u -c «import setuptools, tokenize;file=’C:UsersKiannAppDataLocalTemppip-build-0gb8i_zmscipysetup.py’;f=getattr(tokenize, ‘open’, open)(file);code=f.read().replace(‘rn’, ‘n’);f.close();exec(compile(code, file, ‘exec’))» install —record C:UsersKiannAppDataLocalTemppip-18a4dpkj-recordinstall-record.txt —single-version-externally-managed —compile:
Note: if you need reliable uninstall behavior, then install
with pip instead of using setup.py install :
Command «c:python34python.exe -u -c «import setuptools, tokenize;file=’C:UsersKiannAppDataLocalTemppip-build-0gb8i_zmscipysetup.py’;f=getattr(tokenize, ‘open’, open)(file);code=f.read().replace(‘rn’, ‘n’);f.close();exec(compile(code, file, ‘exec’))» install —record C:UsersKiannAppDataLocalTemppip-18a4dpkj-recordinstall-record.txt —single-version-externally-managed —compile» failed with error code 1 in C:UsersKiannAppDataLocalTemppip-build-0gb8i_zmscipy
The text was updated successfully, but these errors were encountered:
Источник
Pip scipy install error
Reading time В· 4 min
ModuleNotFoundError: No module named ‘scipy’ in Python #
The Python «ModuleNotFoundError: No module named ‘scipy’» occurs when we forget to install the scipy module before importing it or install it in an incorrect environment. To solve the error, install the module by running the pip install scipy command.
Open your terminal in your project’s root directory and install the scipy module.
After you install the scipy package, try importing it like:
The Python error «ModuleNotFoundError: No module named ‘scipy’» occurs for multiple reasons:
- Not having the scipy package installed by running pip install scipy .
- Installing the package in a different Python version than the one you’re using.
- Installing the package globally and not in your virtual environment.
- Your IDE running an incorrect version of Python.
- Naming your module scipy.py which would shadow the official module.
- Declaring a variable named scipy which would shadow the imported variable.
If the error persists, get your Python version and make sure you are installing the package using the correct Python version.
For example, my Python version is 3.10.4 , so I would install the scipy package with pip3.10 install scipy .
Notice that the version number corresponds to the version of pip I’m using.
If the PATH for pip is not set up on your machine, replace pip with python3 -m pip :
If the «No module named ‘scipy’» error persists, try restarting your IDE and development server/script.
You can check if you have the scipy package installed by running the pip show scipy command.
The pip show scipy command will either state that the package is not installed or show a bunch of information about the package, including the location where the package is installed.
If the package is not installed, make sure your IDE is using the correct version of Python.
For example, In VSCode, you can press CTRL + Shift + P or ( вЊ + Shift + P on Mac) to open the command palette.
Then type «Python select interpreter» in the field.
Then select the correct python version from the dropdown menu.
If you are using a virtual environment, make sure you are installing scipy in your virtual environment and not globally.
You can try creating a virtual environment if you don’t already have one.
If the python3 -m venv venv command doesn’t work, try the following 2 commands:
- python -m venv venv
- py -m venv venv
Your virtual environment will use the version of Python that was used to create it.
You also shouldn’t be declaring a variable named scipy as that would also shadow the original module.
If the error is not resolved, try to uninstall the scipy package and then install it.
Try restarting your IDE and development server/script.
You can also try to upgrade the version of the scipy package.
This one is for using virtual environments (VENV) on Windows :
This one is for using virtual environments (VENV) on MacOS and Linux :
Conclusion #
The Python «ModuleNotFoundError: No module named ‘scipy’» occurs when we forget to install the scipy module before importing it or install it in an incorrect environment. To solve the error, install the module by running the pip install scipy command.
Источник
I fail to install Scipy by pip, can you help me? #5995
I use python 2.7.11
The text was updated successfully, but these errors were encountered:
Scipy has dependencies outside Python which pip was not able to find on your system.
The easiest fix is probably to install scipy using anaconda, which comes bundled with all required dependencies.
@jakevdp How to solve this problem? ohh, I don’t want to install Anacoda.
I have used the precompiled package available here and it is working for me.
It worked for me:
gohlke/pythonlibs/#numpy. Use the version that is the same as your python version (check using python —version or python -V). Eg. if your python is 3.5.2, download the wheel which shows cp35
gohlke/pythonlibs/#scipy (similar to the step above).
@cyslug Using your method, I have solved this problem. Thank you! 😘
@cyslug When im trying this method it shows
numpy-1.13.1+mkl-cp27-cp27m-win_amd64.whl is not a supported wheel on this platform.
what to do?
@nehahooda Probably you have a 32-bit OS. But in any case consider switching to Python 3
@ilayn no its 64-bit OS.
@nehahooda what version of Python are you using?
@cyslug
Python 2.7.13 (v2.7.13:a06454b1afa1, Dec 17 2016, 20:42:59) [MSC v.1500 32 bit (Intel)] on win32.
GOT IT ..I need packages of 32 bit not of the 64 bit.
Источник
Failed To Install SciPy On Windows with Python 3.9 #12923
The text was updated successfully, but these errors were encountered:
I guess that the main issue here is that scipy and numpy do not provide binary wheels for Python 3.9 which has been released yesterday.
It would be really nice to have wheels for Python 3.9 so not many users trying the new Python would not have to compile scipy from sources.
Noted, I’m currently working on the 1.5.3 release (albeit slowly) which is slated to include new Linux ARM64 wheels; I wonder if adding both ARM64 wheels and an extra Python version is asking for trouble in one point release. Anyway, we will work toward it I guess.
We’ve been testing python3.9 on Linux for a while. It’s simple to add a 3.9 entry to the macOS testing matrix. Not sure how easy it’ll be for windows. Numpy 3.9 wheels won’t be too far off, are there 3.9 nightly wheels for numpy?
Same issue here. 🙁
Thanks for your efforts to fix this though!
I had similar problem while trying to run «pip install seaborn». The problem is that the new Python 3.9 does not provide binary wheels for scipy and numpy.
What I did was to uninstall Python 3.9 and reinstall Python 3.8 and everything worked perfectly.
I returned to 3.8 also.
The CPython 3.9 wheels for numpy has just been uploaded yesterday. Does this mean the one for scipy will be out soon-ish?
yes, I’m working on it (in free time)
Wheels for 3.9 are now available, so closing.
Источник
Не удается установить Scipy через pip
при установке scipy через pip с :
Pip не удается построить scipy и выдает следующую ошибку:
как я могу получить scipy, чтобы построить успешно? Это может быть новая проблема с OSX Yosemite, так как я только что обновил и не имел проблем с установкой scipy раньше.
21 ответов:
после открытия вопрос с командой SciPy мы обнаружили, что вам нужно обновить pip с помощью:
и Python 3 это работает:
для правильной установки SciPy. Зачем? Потому что:
более старые версии pip должны быть указаны для использования колес, IIRC с —use-wheel. Или вы можете обновить сам pip, тогда он должен забрать колеса.
обновление pip решает проблему, но вы можете быть в состоянии просто используйте —use-wheel флаг, а также.
пользователи Microsoft Windows 64-битных установок Python должны будут загрузить 64-бит .whl из Scipy от здесь, просто cd в папку, которую вы загрузили и
я сталкиваюсь с той же проблемой при установке Scipy под ubuntu.
Я должен был использовать команду:
вы можете получить более подробную информацию здесь установка SciPy с pip
Извините, не знаю, как это сделать под OS X Yosemite.
в windows 10 большинство параметров не будет работать. Выполните следующие действия:
в Windows 10 с CMD, вы не можете скачать scipy непосредственно с помощью большинства известных команд, таких как wget , cloning scipy github , pip install scipy , etc
для установки, перейдите к pythonlibs .whl files , а если вы используете python 2.7 32 bit скачать тут numpy-1.11.2rc1+mkl-cp27-cp27m-win32.whl and scipy-0.18.1-cp27-cp27m-win32.whl или python 2.7 62 bit скачать тут numpy-1.11.2rc1+mkl-cp27-cp27m-win_amd64.whl and scipy-0.18.1-cp27-cp27m-win_amd64.whl
после загрузки,сохраните файлы под ваши python directory , in мой случай это был c:>python27
- scipy должен numpy как зависимость, так вот почему мы загружаем numpy до scipy .
- cp27 in .whl файлы означает, что эти файлы предназначены для python 2.7 и cp33 расшифровывается как python 3.x speciafically >=3.3
после нахождения ответ для некоторых подсказок, я получил эту работу, делая
(первый из этих шагов занял 96 минут на моем 2011 Mac Book Air, поэтому я надеюсь, что вы не спешите!)
скачать whl файл для соответствующей версии python из http://www.lfd.uci.edu /
положите его в каталог, выполните следующую команду
C:directory > pip install scipy-0.19.0rc2-cp35-cp35m-win_amd64.колесо
Если вы совершенно новичок в Python читать шаг за шагом или перейти непосредственно к последнему шагу. Следуйте приведенному ниже методу для установки scipy 0.18.1 на Windows 64-бит, Python 64-бит . Если ниже команда не работает, то продолжайте дальше
будьте осторожны с версиями
.whl версия numpy и scipy файлов
Сначала установите numpy и составляющей.
имейте в виду имя файла (проверьте номер версии).
чтобы проверить, какая версия поддерживается вашим pip, перейдите к пункту № 2 ниже.
Если вы используете .файл колесо . Возможны следующие ошибки .
- вы используете pip версии 7.1.0, однако версия 8.1.2 доступна.
вы должны рассмотреть возможность обновления с помощью команды ‘python-m pip install —upgrade pip’
- scipy-0.15.1-cp33-none-win_amd64.колесо.колесо не поддерживается колесо на этой платформе
для вышеуказанной ошибки: запустите Python и введите :
[(‘cp35’, ‘cp35m’, ‘win_amd64’), (‘cp35’, ‘никто’, ‘win_amd64’), (‘py3’, ‘нет’, ‘win_amd64’), (‘cp35’, ‘никто’, ‘любой’), (‘КС3’, ‘никто’, ‘любой’), (‘py35’, ‘никто’, ‘любой’), (‘py3’, ‘нет’, ‘любой’), (‘py34’, ‘никто’, ‘любой’), (‘py33’, ‘никто’, ‘любой’), (‘py32’, ‘никто’, ‘любой’), (‘py31’, ‘никто’, ‘любой’), (‘py30’, ‘нет’, ‘любой’)]
на выходе вы увидите, что cp35 есть, поэтому загрузите cp35 для numpy, а также составляющей.Дальнейшие изменения приветствуются.
вместо того, чтобы идти по более сложному маршруту загрузки конкретных пакетов. Я предпочитаю идти более быстрым путем использования Conda. у Пипа есть свои проблемы.
командная строка
план пакета для установки в окружающую среду C:UsersxyzMiniconda3:
будут установлены следующие новые пакеты:
следующие пакеты будут заменены более приоритетным каналом:
gohlke / pythonlibs / #scipy
Это альтернатива Пип. У меня также была такая же ошибка при установке составляющей С pip.
затем я загрузил и установил MiniConda. А затем я использовал следующую команду для установки pytables.
пожалуйста, обратитесь к скриншоту ниже.
лучший метод, который я мог бы предложить это
загрузите файл колеса из этого места для вашей версии python
переместите файл на главный диск, например C:>
запустите Cmd и введите следующее
- pip установить scipy-1.0.0rc1-cp36-none-win_amd64.колесо
обратите внимание, что это версия, которую я использую для моего pyhton 3.6.2 он должен установить штраф
вы можете запустить эту команду после того, как убедитесь, что все ваши дополнения python обновлены
gohlke / pythonlibs Составляющей версия подходит для вас. Рассмотрим Вашу версию Python (python —version) и ваша системная архитектура (32/64 бит). Соответственно выбираете составляющей версия. scipy-0.18.1 —cp27-cp27m-для Win32 — для Python 2.7 32 бит scipy-0.18.1 —cp27-cp27m- win_amd64 — для Python 2.7 64 бит В противном случае ошибка scipy-0.15.1-cp33-none-win_amd64.колесо.колесо не поддерживается колесо на этой платформе появится всплывающее окно при установке.
теперь измените каталог на загруженный файл и выполните команду pip install scipy-0.15.1-cp33-none-win_amd64.whl.whl (изменить имя файла соответствующим образом)
Я добавил этот ответ только потому, что ответ Аруна(нашел полезным сам) ничего не упомянул о 32/64-битном сопоставлении, с которым я столкнулся.
Если вы используете CentOS, вам нужно установить lapack-devel следующим образом:
Источник
pip install scipy
The Python scipy library is among the top 100 Python libraries, with more than 29,665,551 downloads. This article will show you everything you need to get this installed in your Python environment.
- Library Link
How to Install scipy on Windows?
- Type
"cmd"in the search bar and hitEnterto open the command line. - Type “
pip install scipy” (without quotes) in the command line and hitEnteragain. This installs scipy for your default Python installation. - The previous command may not work if you have both Python versions 2 and 3 on your computer. In this case, try
"pip3 install scipy"or “python -m pip install scipy“. - Wait for the installation to terminate successfully. It is now installed on your Windows machine.
Here’s how to open the command line on a (German) Windows machine:
First, try the following command to install scipy on your system:
pip install scipy
Second, if this leads to an error message, try this command to install scipy on your system:
pip3 install scipy
Third, if both do not work, use the following long-form command:
python -m pip install scipy
The difference between pip and pip3 is that pip3 is an updated version of pip for Python version 3. Depending on what’s first in the PATH variable, pip will refer to your Python 2 or Python 3 installation—and you cannot know which without checking the environment variables. To resolve this uncertainty, you can use pip3, which will always refer to your default Python 3 installation.
How to Install scipy on Linux?
You can install scipy on Linux in four steps:
- Open your Linux terminal or shell
- Type “
pip install scipy” (without quotes), hit Enter. - If it doesn’t work, try
"pip3 install scipy"or “python -m pip install scipy“. - Wait for the installation to terminate successfully.
The package is now installed on your Linux operating system.
How to Install scipy on macOS?
Similarly, you can install scipy on macOS in four steps:
- Open your macOS terminal.
- Type “
pip install scipy” without quotes and hitEnter. - If it doesn’t work, try
"pip3 install scipy"or “python -m pip install scipy“. - Wait for the installation to terminate successfully.
The package is now installed on your macOS.
Given a PyCharm project. How to install the scipy library in your project within a virtual environment or globally? Here’s a solution that always works:
- Open
File > Settings > Projectfrom the PyCharm menu. - Select your current project.
- Click the
Python Interpretertab within your project tab. - Click the small
+symbol to add a new library to the project. - Now type in the library to be installed, in your example
"scipy"without quotes, and clickInstall Package. - Wait for the installation to terminate and close all pop-ups.
Here’s the general package installation process as a short animated video—it works analogously for scipy if you type in “scipy” in the search field instead:
Make sure to select only “scipy” because there may be other packages that are not required but also contain the same term (false positives):
How to Install scipy in a Jupyter Notebook?
To install any package in a Jupyter notebook, you can prefix the !pip install my_package statement with the exclamation mark "!". This works for the scipy library too:
!pip install my_package
This automatically installs the scipy library when the cell is first executed.
How to Resolve ModuleNotFoundError: No module named ‘scipy’?
Say you try to import the scipy package into your Python script without installing it first:
import scipy # ... ModuleNotFoundError: No module named 'scipy'
Because you haven’t installed the package, Python raises a ModuleNotFoundError: No module named 'scipy'.
To fix the error, install the scipy library using “pip install scipy” or “pip3 install scipy” in your operating system’s shell or terminal first.
See above for the different ways to install scipy in your environment.
Improve Your Python Skills
If you want to keep improving your Python skills and learn about new and exciting technologies such as Blockchain development, machine learning, and data science, check out the Finxter free email academy with cheat sheets, regular tutorials, and programming puzzles.
Join us, it’s fun! 🙂
While working as a researcher in distributed systems, Dr. Christian Mayer found his love for teaching computer science students.
To help students reach higher levels of Python success, he founded the programming education website Finxter.com. He’s author of the popular programming book Python One-Liners (NoStarch 2020), coauthor of the Coffee Break Python series of self-published books, computer science enthusiast, freelancer, and owner of one of the top 10 largest Python blogs worldwide.
His passions are writing, reading, and coding. But his greatest passion is to serve aspiring coders through Finxter and help them to boost their skills. You can join his free email academy here.
Scipy is a free and open-source python module. It contains a large number of inbuilt mathematical functions that can easily do scientific and technical computing. But many beginners get the error modulenotfounderror: no module named ‘scipy’. If you are also getting this error , then this entire post is for you. In this entire tutorial, you will learn how to solve the issue of modulenotfounderror: no module named ‘scipy’.
What is ModuleNotFoundError?
ModuleNotFoundError is a runtime error. Most of the coders get this error when the package is not installed in your system. Suppose you are using the python package A then you will get the error ModuleNotFoundError : no module named ‘A’ , if it is not installed in your system.
In the next section, you will know the root cause of the error and how to solve it.
The root cause of no module named ‘scipy’ error
The main and root cause of the modulenotfounderror: no module named ‘scipy’ error is that you have not installed the scipy package in your system. For example, you will get the red underline below the word scipy as you have not installed the package in the pycharm environment.
import scipyOutput
The same error you will get when you will try to import in the terminal or command prompt.
The solution for modulenotfounderror: no module named ‘scipy’
The solution for this error is very simple. You have to install scipy in your system. To install it you have to use the pip command. Which pip version you will use depends upon the python version in your system. If your python version is 3. xx then use pip3 and if 2. xx then use the pip command.
To check the version of python, use the below line of a bash command.
python --versionOutput
My system has 3. xx version, so I will use the pip3 command.
Open your command prompt or terminal and type the below command to install scipy package.
pip3 install scipy
Now if you again import the scipy then you will not get the modulenotfounderror: no module named ‘scipy’ in your system.
These are the methods to solve this no module named scipy error. I hope you have liked this tutorial. If you have any queries then you can contact us for more help.
Join our list
Subscribe to our mailing list and get interesting stuff and updates to your email inbox.
We respect your privacy and take protecting it seriously
Thank you for signup. A Confirmation Email has been sent to your Email Address.
Something went wrong.
Today We are Going To Solve ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly in Python. Here we will Discuss All Possible Solutions and How this error Occurs So let’s get started with this Article.
Contents
- 1 How to Fix ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error?
- 1.1 Solution 1 : Update pip
- 1.2 Solution 2 : Run the command
- 1.3 Solution 3 : Install pip
- 2 Conclusion
- 2.1 Also Read This Solutions
- How to Fix ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error?
To Fix ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error just Update pip. To solve this error just update your pip version by using the given below command and your error will be solved.
pip3 install --upgrade pip - ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly
To Fix ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error just Run the command. Run the below command to solve your error.
pip install --upgrade pip setuptools wheel
Solution 1 : Update pip
To solve this error just update your pip version by using the given below command and your error will be solved.
pip3 install --upgrade pipSolution 2 : Run the command
Run the below command to solve your error.
pip install --upgrade pip setuptools wheelSolution 3 : Install pip
Try these commands :
pip install p5py
pip install PEP517Conclusion
So these were all possible solutions to this error. I hope your error has been solved by this article. In the comments, tell us which solution worked? If you liked our article, please share it on your social media and comment on your suggestions. Thank you.
Also Read This Solutions
- npm WARN old lockfile The package-lock.json file was created with an old version of npm
- numpy.core._exceptions.MemoryError: Unable to allocate array with shape
- Module not found: Error: Can’t resolve ‘react/jsx-runtime’
- Laravel PDOException could not find driver
- Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.8.0:compile (default-compile) on project demo: Fatal error compiling: invalid target release: 11
Here’s what I got when I typed «pip install scipy» into my cmd. I’m running Windows 10. Does anyone know what’s going on?
C:Userstonyr>pip install scipy Collecting scipy Using cached scipy-0.19.1.tar.gz Building wheels for collected packages: scipy Running setup.py bdist_wheel for scipy … error Complete output from command c:userstonyrappdatalocalprogramspythonpython36python.exe -u -c «import setuptools, tokenize;__file__=’C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py’;f=getattr(tokenize, ‘open’, open)(file);code=f.read().replace(‘rn’, ‘n’);f.close();exec(compile(code, file, ‘exec’))» bdist_wheel -d C:UserstonyrAppDataLocalTemptmp22trfpgqpip-wheel- —python-tag cp36: lapack_opt_info: lapack_mkl_info: libraries mkl_rt not found in [‘c:userstonyrappdatalocalprogramspythonpython36lib’, ‘C:’, ‘c:userstonyrappdatalocalprogramspythonpython36libs’] NOT AVAILABLE
openblas_lapack_info: libraries openblas not found in [‘c:userstonyrappdatalocalprogramspythonpython36lib’, ‘C:’, ‘c:userstonyrappdatalocalprogramspythonpython36libs’] NOT AVAILABLE
atlas_3_10_threads_info: Setting PTATLAS=ATLAS c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:1051: UserWarning: Specified path C:projectsnumpy-wheelswindows-wheel-builderatlas-buildsatlas-3.11.38-sse2-64lib is invalid. pre_dirs = system_info.get_paths(self, section, key) <class ‘numpy.distutils.system_info.atlas_3_10_threads_info’> NOT AVAILABLE
atlas_3_10_info: <class ‘numpy.distutils.system_info.atlas_3_10_info’> NOT AVAILABLE
atlas_threads_info: Setting PTATLAS=ATLAS <class ‘numpy.distutils.system_info.atlas_threads_info’> NOT AVAILABLE
atlas_info: <class ‘numpy.distutils.system_info.atlas_info’> NOT AVAILABLE
c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:572: UserWarning: Atlas (http://math-atlas.sourceforge.net/) libraries not found. Directories to search for the libraries can be specified in the numpy/distutils/site.cfg file (section [atlas]) or by setting the ATLAS environment variable. self.calc_info() lapack_info: libraries lapack not found in [‘c:userstonyrappdatalocalprogramspythonpython36lib’, ‘C:’, ‘c:userstonyrappdatalocalprogramspythonpython36libs’] NOT AVAILABLE
c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:572: UserWarning: Lapack (http://www.netlib.org/lapack/) libraries not found. Directories to search for the libraries can be specified in the numpy/distutils/site.cfg file (section [lapack]) or by setting the LAPACK environment variable. self.calc_info() lapack_src_info: NOT AVAILABLE
c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:572: UserWarning: Lapack (http://www.netlib.org/lapack/) sources not found. Directories to search for the sources can be specified in the numpy/distutils/site.cfg file (section [lapack_src]) or by setting the LAPACK_SRC environment variable. self.calc_info() NOT AVAILABLE
Running from scipy source directory. non-existing path in ‘scipyintegrate’: ‘quadpack.h’ Traceback (most recent call last): File «<string>», line 1, in <module> File «C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py», line 416, in <module> setup_package() File «C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py», line 412, in setup_package setup(**metadata) File «c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilscore.py», line 135, in setup config = configuration() File «C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py», line 336, in configuration config.add_subpackage(‘scipy’) File «c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py», line 1029, in add_subpackage caller_level = 2) File «c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py», line 998, in get_subpackage caller_level = caller_level + 1) File «c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py», line 935, in _get_configuration_from_setup_py config = setup_module.configuration(*args) File «scipysetup.py», line 15, in configuration config.add_subpackage(‘linalg’) File «c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py», line 1029, in add_subpackage caller_level = 2) File «c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py», line 998, in get_subpackage caller_level = caller_level + 1) File «c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py», line 935, in _get_configuration_from_setup_py config = setup_module.configuration(*args) File «scipylinalgsetup.py», line 20, in configuration raise NotFoundError(‘no lapack/blas resources found’) numpy.distutils.system_info.NotFoundError: no lapack/blas resources found
Failed building wheel for scipy Running setup.py clean for scipy Complete output from command c:userstonyrappdatalocalprogramspythonpython36python.exe -u -c «import setuptools, tokenize;__file__=’C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py’;f=getattr(tokenize, ‘open’, open)(file);code=f.read().replace(‘rn’, ‘n’);f.close();exec(compile(code, file, ‘exec’))» clean —all:
setup.py clean is not supported, use one of the following instead:
- `git clean -xdf` (cleans all files)
- `git clean -Xdf` (cleans all versioned files, doesn't touch
files that aren't checked into the git repo)
Add --force to your command to use it anyway if you must (unsupported).
Failed cleaning build dir for scipy Failed to build scipy Installing collected packages: scipy Running setup.py install for scipy … error Complete output from command c:userstonyrappdatalocalprogramspythonpython36python.exe -u -c «import setuptools, tokenize;__file__=’C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py’;f=getattr(tokenize, ‘open’, open)(file);code=f.read().replace(‘rn’, ‘n’);f.close();exec(compile(code, file, ‘exec’))» install —record C:UserstonyrAppDataLocalTemppip-3i6l2trm-recordinstall-record.txt —single-version-externally-managed —compile:
Note: if you need reliable uninstall behavior, then install
with pip instead of using `setup.py install`:
- `pip install .` (from a git repo or downloaded source
release)
- `pip install scipy` (last SciPy release on PyPI)
lapack_opt_info:
lapack_mkl_info:
libraries mkl_rt not found in ['c:\users\tonyr\appdata\local\programs\python\python36\lib', 'C:\', 'c:\users\tonyr\appdata\local\programs\python\python36\libs']
NOT AVAILABLE
openblas_lapack_info:
libraries openblas not found in ['c:\users\tonyr\appdata\local\programs\python\python36\lib', 'C:\', 'c:\users\tonyr\appdata\local\programs\python\python36\libs']
NOT AVAILABLE
atlas_3_10_threads_info:
Setting PTATLAS=ATLAS
c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:1051: UserWarning: Specified path C:projectsnumpy-wheelswindows-wheel-builderatlas-buildsatlas-3.11.38-sse2-64lib is invalid.
pre_dirs = system_info.get_paths(self, section, key)
<class 'numpy.distutils.system_info.atlas_3_10_threads_info'>
NOT AVAILABLE
atlas_3_10_info:
<class 'numpy.distutils.system_info.atlas_3_10_info'>
NOT AVAILABLE
atlas_threads_info:
Setting PTATLAS=ATLAS
<class 'numpy.distutils.system_info.atlas_threads_info'>
NOT AVAILABLE
atlas_info:
<class 'numpy.distutils.system_info.atlas_info'>
NOT AVAILABLE
c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:572: UserWarning:
Atlas (http://math-atlas.sourceforge.net/) libraries not found.
Directories to search for the libraries can be specified in the
numpy/distutils/site.cfg file (section [atlas]) or by setting
the ATLAS environment variable.
self.calc_info()
lapack_info:
libraries lapack not found in ['c:\users\tonyr\appdata\local\programs\python\python36\lib', 'C:\', 'c:\users\tonyr\appdata\local\programs\python\python36\libs']
NOT AVAILABLE
c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:572: UserWarning:
Lapack (http://www.netlib.org/lapack/) libraries not found.
Directories to search for the libraries can be specified in the
numpy/distutils/site.cfg file (section [lapack]) or by setting
the LAPACK environment variable.
self.calc_info()
lapack_src_info:
NOT AVAILABLE
c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilssystem_info.py:572: UserWarning:
Lapack (http://www.netlib.org/lapack/) sources not found.
Directories to search for the sources can be specified in the
numpy/distutils/site.cfg file (section [lapack_src]) or by setting
the LAPACK_SRC environment variable.
self.calc_info()
NOT AVAILABLE
Running from scipy source directory.
non-existing path in 'scipy\integrate': 'quadpack.h'
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py", line 416, in <module>
setup_package()
File "C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py", line 412, in setup_package
setup(**metadata)
File "c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilscore.py", line 135, in setup
config = configuration()
File "C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py", line 336, in configuration
config.add_subpackage('scipy')
File "c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py", line 1029, in add_subpackage
caller_level = 2)
File "c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py", line 998, in get_subpackage
caller_level = caller_level + 1)
File "c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py", line 935, in _get_configuration_from_setup_py
config = setup_module.configuration(*args)
File "scipysetup.py", line 15, in configuration
config.add_subpackage('linalg')
File "c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py", line 1029, in add_subpackage
caller_level = 2)
File "c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py", line 998, in get_subpackage
caller_level = caller_level + 1)
File "c:userstonyrappdatalocalprogramspythonpython36libsite-packagesnumpydistutilsmisc_util.py", line 935, in _get_configuration_from_setup_py
config = setup_module.configuration(*args)
File "scipylinalgsetup.py", line 20, in configuration
raise NotFoundError('no lapack/blas resources found')
numpy.distutils.system_info.NotFoundError: no lapack/blas resources found
----------------------------------------
Command «c:userstonyrappdatalocalprogramspythonpython36python.exe -u -c «import setuptools, tokenize;__file__=’C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipysetup.py’;f=getattr(tokenize, ‘open’, open)(file);code=f.read().replace(‘rn’, ‘n’);f.close();exec(compile(code, file, ‘exec’))» install —record C:UserstonyrAppDataLocalTemppip-3i6l2trm-recordinstall-record.txt —single-version-externally-managed —compile» failed with error code 1 in C:UserstonyrAppDataLocalTemppip-build-wpqb3aafscipy
Hello Guys, How are you all? Hope You all Are Fine. Today I am trying to install scipy but I am facing following error ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly in python. So Here I am Explain to you all the possible solutions here.
Without wasting your time, Let’s start This Article to Solve This Error.
Contents
- How ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error Occurs ?
- How To Solve ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error ?
- Solution 1: upgrade pip
- Solution 2: update pip with setuptools wheel
- Solution 3: run this command
- Solution 4: Use this command
- Summary
I am trying to install scipy but I am facing following error.
ERROR: Failed building wheel for scipy
Failed to build scipy
ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directlyHow To Solve ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error ?
- How To Solve ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error?
To Solve ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error Just update your pip and your error will be solve. pip3 install –upgrade pip. this error solved just after update pip with setuptools wheel just run below command. pip install –upgrade pip setuptools wheel.
- ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly
To Solve ERROR: Could not build wheels for scipy which use PEP 517 and cannot be installed directly Error Just update your pip and your error will be solve. pip3 install –upgrade pip. this error solved just after update pip with setuptools wheel just run below command. pip install –upgrade pip setuptools wheel.
Solution 1: upgrade pip
Just update your pip and your error will be solve.
pip3 install --upgrade pipthis error solved just after run below command.
pip install --upgrade pip setuptools wheelSolution 3: run this command
Just run this command.
pip install p5py
pip install PEP517Solution 4: Use this command
Above 3 solution not worked ? Then maybe your host OS is missing pkg-config So You just need to install it with this command.
If you are using linux then run this command.
sudo apt-get install -y pkg-config
If you using windows then follow this procedure.
pip install pkgconfigThen Just re-run pip command to install scipy.
Summary
It’s all About this issue. Hope all solution helped you a lot. Comment below Your thoughts and your queries. Also, Comment below which solution worked for you?
Also, Read
- AttributeError: module ‘importlib’ has no attribute ‘util’.