Произошла ошибка c1 6775 5 ps vita

При установки HENkaku: Ошибка C1-6775-5 при запуске molecularShell Вам нужно запустить установщик HENkaku заново.. Веб браузер показывает "Please wait&" Это нор

При установки HENkaku:
Ошибка C1-6775-5 при запуске molecularShell

Вам нужно запустить установщик HENkaku заново..

Веб браузер показывает «Please wait…»

Это нормально. Просто дождитесь, пока страница загрузится.

Веб браузер закрылся с ошибкой и появилось окно с отправкой отчета об ошибке ПЕРЕД»Welcome to HENkaku»

Нажмите «ОК» и попробуйте заново. Если вылетает с ошибкой три раза и больше, закройте его. Затем выполните установку заново.

Веб браузер закрылся с ошибкой и появилось окно с отправкой отчета об ошибке ПОСЛЕ «Welcome to HENkaku»

Нажмите «ОК» и попробуйте заново. Если это происходит более трех раз подряд, перезагрузите консоль.

Устройство зависает при установке

Установка не удалась. Убедитесь, что на Вашей карте памяти доступно более 10 мегабайт свободного места. Удерживайте кнопку питания в течении 15сек и выключите полностью систему, затем включите ее и попробуйте начать установку заново.

Установка игр (через шелл):

Ошибка C1-6775-5 при запуске molecularShell

Вы должны запустить установщик HENkaku заново. Следуйте инструкциям выше.

FTP error

Проверьте, не блокирует ли соединение ваш брандмауэр (фаервол) и убедитесь, что оба устройства (ПК и PS Vita) подключены к одной интернет-сети.

===4PDA===

Create an account to follow your favorite communities and start taking part in conversations.

r/vitahacks

Posted byu/[deleted]6 years ago

I’ve tried the search function but I didn’t find the answer I’m looking for which is why I’m making this thread.

When I turn off my PS Vita and on again I am unable to use Henkaku and anything I installed with it. I have to reinstall Henkaku over the website however I need a permanent fix because I can’t have WiFi all the time especially when I’m on the go.

level 1

At the time it is necessary to reinstall it every time you power off completely. Yifanlu has provided download links to files to host your own server with henkaku.

level 2

Thanks for this info. I was thinking my Vita some how automatically updated or some shit and that I was screwed. Thank Talos for Reddit and for people like you, kind sir.

level 2

Thank you for the quick answer, kinda figured since I couldn’t find any answers but I had to make sure.

level 1

Use the android server that was posted on here. You host it henkaku on your phone and connect that way.

About Community

Subreddit Icon

A place to discuss Vita hacking and homebrew. Both technical and non-technical discussion are welcome. Please do not ask or discuss how to pirate/»backup» games, it is illegal and against redditquette.



Advertising (This ad goes away for registered users. You can Login or Register)

luis67

Posts: 20
Joined: Sun Oct 07, 2012 2:38 pm

c1-6775-5 error

Molecularshell c1-6775-5 error again and again,i tried to format memory card,rebuild database,restore vita via recovery menu and clear all cache and cookies also tried this fix https://www.youtube.com/watch?v=ak5RSRQCMrc but nothing,the first time is working but when i reboot my vita this error appears

Advertising

CPUzX

Moderator
Posts: 276
Joined: Thu Nov 28, 2013 8:25 pm
Location: United Kingdom

Re: c1-6775-5 error

Post

by CPUzX » Wed Aug 03, 2016 10:00 pm

I kept getting that error on Metal Gear Solid HD, so I went into Molecular Shell and deleted my encrypted savedata and also renamed the molecular shell patch for the decryption of the game for it to boot as normal and it worked afterwards. It might have to do with you corrupting a configuration or a file somehow

Advertising

luis67

Posts: 20
Joined: Sun Oct 07, 2012 2:38 pm

Re: c1-6775-5 error

Post

by luis67 » Thu Aug 04, 2016 4:56 am

CPUzX wrote:I kept getting that error on Metal Gear Solid HD, so I went into Molecular Shell and deleted my encrypted savedata and also renamed the molecular shell patch for the decryption of the game for it to boot as normal and it worked afterwards. It might have to do with you corrupting a configuration or a file somehow

I am using mortal kombat 9 cartidge version but i never had problem with this,the problem is inside molecular shell and i dion’t know what to do.

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.


  • Thread starter

    luis67


  • Start date

    Aug 3, 2016


  • Views
    15,108

  • Replies
    5
Joined
Aug 3, 2016
Messages
4
Trophies
0
Age
44
XP

84

Country

Greece

  • #1

Molecularshell c1-6775-5 error again and again,i tried to format memory card,rebuild database,restore vita via recovery menu and clear all cache and cookies also tried this fix but nothing,the first time is working but when i reboot my vita this error appears

Last edited by luis67,
Aug 3, 2016

  • #2

Did you try setting it to wumbo?

Joined
Jul 17, 2016
Messages
155
Trophies
0
Age
32
XP

161

Country

  • #3

so did you fix your problem?

Joined
Aug 3, 2016
Messages
4
Trophies
0
Age
44
XP

84

Country

Greece

  • #4

Did you try setting it to wumbo?

What do you mean?

——————— MERGED —————————

so did you fix your problem?

No i didn’t

  • #5

What’s the problem here again? We knew from day one that once you power off the vita and turn it back on you will need to reinstall it from the web browser…

If that’s your problem, that’s not a problem, it’s the way it works like the wii u kernel exploit that needs to be relaunched upon restarting the system.

Joined
Aug 3, 2016
Messages
4
Trophies
0
Age
44
XP

84

Country

Greece

  • #6

What’s the problem here again? We knew from day one that once you power off the vita and turn it back on you will need to reinstall it from the web browser…

If that’s your problem, that’s not a problem, it’s the way it works like the wii u kernel exploit that needs to be relaunched upon restarting the system.

Ok thanks mate.I thought that this error it is not normal after power off-on my vita.

Similar threads

You may also like…

  • No one is chatting at the moment.

    Приложения для PlayStation 4

    [pvc1 в 07:52|28 Янв 2023] 

    ПК софт для PlayStation 4

    [pvc1 в 11:16|27 Янв 2023] 

    Приложения для PlayStation 5

    [pvc1 в 11:45|26 Янв 2023] 

    Прошивки и программы для PlayStation Vita

    [pvc1 в 10:02|24 Янв 2023] 

    Прошивки и приложения для PlayStation 3

    [pvc1 в 09:27|24 Янв 2023] 

    Прошивки и программы для PlayStation Vita

    [pvc1 в 11:45|23 Янв 2023] 

    Приложения для PlayStation 2

    Приложения для PlayStation 2

    ПК софт для PlayStation 4

    [pvc1 в 10:44|20 Янв 2023] 

    ПК софт для PlayStation 4

    [pvc1 в 10:48|19 Янв 2023] 

    Прошивки и программы для PlayStation Vita

    [pvc1 в 10:35|18 Янв 2023] 

    Приложения для PlayStation 2

    Общая дискуссия по PlayStation 3

    [m951 в 03:46|18 Янв 2023] 

    ПК программы для PlayStation 2

    [pvc1 в 15:17|16 Янв 2023] 

    Мобильные приложения

    [pvc1 в 15:01|16 Янв 2023] 

    Прошивки и приложения для PlayStation 3

    [pvc1 в 14:59|16 Янв 2023] 

    Общая дискуссия по PlayStation 5

    [pvc1 в 10:38|13 Янв 2023] 

    ПК софт для PlayStation 4

    [pvc1 в 09:58|13 Янв 2023] 

    Общая дискуссия по PlayStation 2

    Эмуляторы для PlayStation Vita

    [pvc1 в 12:26|11 Янв 2023] 

    ПК программы для PlayStation 2

    [pvc1 в 12:13|11 Янв 2023] 

    Приложения для PlayStation 4

    [pvc1 в 19:37|08 Янв 2023] 

    ПК программы для PlayStation 3

    [pvc1 в 16:58|08 Янв 2023] 

    Приложения для PlayStation 2

    Об играх PlayStation 2

    Мобильные приложения

    ПК софт для PlayStation 5

    [pvc1 в 09:26|04 Янв 2023] 

    Программы и Приложения для PlayStation Portable

    [pvc1 в 19:05|03 Янв 2023] 

    Программы и Приложения для PlayStation Portable

    [pvc1 в 18:59|03 Янв 2023] 

    ПК софт для PlayStation 4

    [pvc1 в 16:48|01 Янв 2023] 

    Приложения для PlayStation 2

    Общая дискуссия по PlayStation 5

    [pvc1 в 09:14|29 Дек 2022] 

    Прошивки и приложения для PlayStation 3

    ПК программы для PlayStation 2

    [pvc1 в 10:26|27 Дек 2022] 

    Прошивки и программы для PlayStation Vita

    [pvc1 в 16:01|25 Дек 2022] 

    Общая дискуссия по PlayStation 1

    [pvc1 в 09:51|23 Дек 2022] 

    ПК программы для PlayStation 2

    [pvc1 в 09:10|17 Дек 2022] 

    Мобильные приложения

    [pvc1 в 09:31|16 Дек 2022] 

    Мобильные приложения

    [pvc1 в 10:47|15 Дек 2022] 

    Прошивки и программы для PlayStation Vita

    [pvc1 в 08:59|15 Дек 2022] 

    Приложения для PlayStation 2

    Программы и Приложения для PlayStation Portable

    [pvc1 в 08:50|13 Дек 2022] 

    Эмуляторы для PlayStation Vita

    [pvc1 в 08:49|13 Дек 2022] 

    Прошивки и программы для PlayStation Vita

    [pvc1 в 09:39|08 Дек 2022] 

    ПК софт для PlayStation 4

    [pvc1 в 09:27|07 Дек 2022] 

    Железные вопросы PlayStation 3

    Прошивки и приложения для PlayStation 3

    [pvc1 в 10:05|28 Ноя 2022] 

    ПК программы для PlayStation 3

    [pvc1 в 09:29|28 Ноя 2022] 

    Прошивки и программы для PlayStation Vita

    [pvc1 в 08:37|21 Ноя 2022] 

    Общая дискуссия по PlayStation 2

    layout title permalink weight

    page

    Usage

    /usage/

    1

    Installing HENkaku

    You must run the installer each time you reboot the device before you can launch any homebrew application. You do not need to reinstall when you place the device into sleep mode. If you press the power button once, you are in sleep mode and do not need to reinstall HENkaku. If you hold the power button and then choose the option to Power Off, then you do need to reinstall HENkaku. You also need to reinstall if the battery runs out. Installing HENkaku requires an internet connection.

    The first time you install HENkaku, a new bubble named «molecularShell» will show up in LiveArea. This application allows you to install other homebrew bubbles. However, once you reboot the device, molecularShell and any other homebrew bubbles you installed will not be able to be launched until you run the installer again.

    {: .text-danger}
    It is important that you never update your Vita past 3.60 if you ever wish to use HENkaku now or in the future. If you do update, all your installed homebrew will no longer work and you cannot install any homebrew in the future.

    Installation

    1. {:class=»text-warning»}Make sure your Vita is running firmware 3.60
    2. Open the Web Browser application and visit {{ site.url }}
    3. Press the «Install» button
    4. Once the installation is complete, the browser will be closed automatically

    Hint: If you’ve installed HENkaku before, you can install it again directly from molecularShell’s LiveArea. Just open the «shell» bubble and use the orange «install» button.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    The web browser shows grey «Please wait…» screen

    This is normal. Just wait for it, eventually it should load the page and trigger the exploit.

    The web browser crashes (error C2-12828-1) and an error report dialog appears

    Press «OK» and try again. If the browser crashes more than three times in a row, you can quit the browser (Press the PS button and swipe the LiveArea page from the top right corner or hold the «O» or «X» button depending on your region). Then you can re-attempt installation.

    If you quit the browser and this still happens more than three times in a row, you should reboot the system and try again.

    If the web browser keeps crashing, and you’ve already rebooted your Vita at least five times in a row, try the following:

    • Delete your cookies. To do that, open the web browser, open the menu and click on «Delete Cookies».
    • Close all your web browser tabs, reboot PS Vita and try going to {{ site.url }}/go/ directly, without visiting {{ site.url }}.
    • Try switching to another internet connection: a firewall or your ISP could be interfering with the proper operation of the exploit.

    The device freezes or reboots after trying to install

    If the device froze, hold the power button for 15 seconds to manually power off the device and then press the power button again to restart the device. You can then attempt to install again.

    The web browser automatically closed after installation

    That is the expected behavior. HENkaku should now be installed. You can launch homebrew applications including molecularShell (see usage directions below).

    The screen becomes black after the installation

    Press the home/PS button and close the browser manually. Installation should be successful.

    A bad plugin crashes device upon installation

    You can force all configuration to be reset by pressing R at the prompt when the bootstrap installer is launched. This is reset your taiHEN config.txt file as well as HENkaku settings.

    Offline Installer

    We now have a solution for people who do not have constant internet access. The HENkaku Offline Installer will hijack the Email application such that you can install HENkaku after reboot using the Email application instead of visiting the website. More details about this here.

    Using molecularShell

    The first time you install HENkaku, the molecularShell bubble will be added to your LiveArea. This will be your portal to installing homebrew.

    Installing Homebrew

    1. The homebrew package you wish to install should be a file with the .vpk extension.
    2. Make sure Wifi is enabled and you are connected to the same network as the host computer.
    3. Open «shell» by launching the bubble.
    4. Press SELECT to start a FTP server. Please note that the FTP server is not password protected. Only run it on a trusted local network.
    5. Note the IP address displayed in a message popup.
    6. Open your FTP client on the host computer and connect to that IP address.
    7. Navigate to «ux0» (this is the root of your memory card or internal storage) and you can upload the .vpk package here or in any subdirectory.
    8. Once you upload all the packages you wish to install you can disconnect the client.
    9. Back in molecularShell, press CIRCLE to stop the FTP server.
    10. Navigate to «ux0:» and then to where you placed the packages. To install, select the package and press X.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    FTP error

    Check if you have a firewall on the host computer. Also make sure you’re on the same network as the host.

    Not all files/devices are shown

    You need to enable unsafe homebrew mode. Open molecularShell and press Start. Then choose the option to enable unsafe homebrew. Back out of the menu, quit molecularShell, and relaunch it again.

    Running Homebrew

    Once you installed HENkaku, running homebrew is as simple as launching the installed bubble directly from LiveArea!

    Upgrading to 3.60

    Since only firmware 3.60 is supported, you can upgrade any Vita on a lower firmware version to 3.60 with these instructions. Be careful not to update to the latest version through official means or you will not be able to use HENkaku!

    Simple Instructions

    Set your DNS to {{ site.dns }} and choose to update from Wi-Fi. Proceed only if the message says «A new version of the system software is available. Firmware 3.60 (変革 Compatible)». That’s it!

    Detailed Instructions

    1. Open the Settings app
    2. Select «Network»
    3. Select «Wi-Fi Settings»
    4. If you are not connected to the internet, do so now. Select your current connection (there should be a green dot to the left).
    5. Select «Advanced Settings»
    6. Under «DNS Settings» choose «Manual»
    7. Under «Primary DNS» set it to {{ site.dns }}
    8. Leave «Secondary DNS» blank. Make sure «Proxy Server» is set to «Do Not Use». Press OK.
    9. Back out to the main settings screen. Select «System Update» and then «Update Using Wi-Fi.»
    10. If you get an error saying your system is up to date, that means either your Vita is on 3.60 already or your Vita is > 3.60 and is not supported by HENkaku
    11. Otherwise you will see a pop-up saying there is a new update. Make sure the message says «3.60 (変革 Compatible)»! If the message does not say that, do not proceed and try to repeat these steps to see if you missed something.
    12. After ensuring you are updating to «3.60 (変革 Compatible)», proceed with the steps on screen to update.
    13. After updating to 3.60, you can follow steps 1-5 again and then set «DNS Settings» back to «Automatic» to restore your DNS settings.

    Support

    Running into problems? You can find us on FreeNode IRC at #henkaku. Community support will also be provided in the forums.

    layout title permalink weight

    page

    Usage

    /usage/

    1

    Installing HENkaku

    You must run the installer each time you reboot the device before you can launch any homebrew application. You do not need to reinstall when you place the device into sleep mode. If you press the power button once, you are in sleep mode and do not need to reinstall HENkaku. If you hold the power button and then choose the option to Power Off, then you do need to reinstall HENkaku. You also need to reinstall if the battery runs out. Installing HENkaku requires an internet connection.

    The first time you install HENkaku, a new bubble named «molecularShell» will show up in LiveArea. This application allows you to install other homebrew bubbles. However, once you reboot the device, molecularShell and any other homebrew bubbles you installed will not be able to be launched until you run the installer again.

    {: .text-danger}
    It is important that you never update your Vita past 3.60 if you ever wish to use HENkaku now or in the future. If you do update, all your installed homebrew will no longer work and you cannot install any homebrew in the future.

    Installation

    1. {:class=»text-warning»}Make sure your Vita is running firmware 3.60
    2. Open the Web Browser application and visit {{ site.url }}
    3. Press the «Install» button
    4. Once the installation is complete, the browser will be closed automatically

    Hint: If you’ve installed HENkaku before, you can install it again directly from molecularShell’s LiveArea. Just open the «shell» bubble and use the orange «install» button.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    The web browser shows grey «Please wait…» screen

    This is normal. Just wait for it, eventually it should load the page and trigger the exploit.

    The web browser crashes (error C2-12828-1) and an error report dialog appears

    Press «OK» and try again. If the browser crashes more than three times in a row, you can quit the browser (Press the PS button and swipe the LiveArea page from the top right corner or hold the «O» or «X» button depending on your region). Then you can re-attempt installation.

    If you quit the browser and this still happens more than three times in a row, you should reboot the system and try again.

    If the web browser keeps crashing, and you’ve already rebooted your Vita at least five times in a row, try the following:

    • Delete your cookies. To do that, open the web browser, open the menu and click on «Delete Cookies».
    • Close all your web browser tabs, reboot PS Vita and try going to {{ site.url }}/go/ directly, without visiting {{ site.url }}.
    • Try switching to another internet connection: a firewall or your ISP could be interfering with the proper operation of the exploit.

    The device freezes or reboots after trying to install

    If the device froze, hold the power button for 15 seconds to manually power off the device and then press the power button again to restart the device. You can then attempt to install again.

    The web browser automatically closed after installation

    That is the expected behavior. HENkaku should now be installed. You can launch homebrew applications including molecularShell (see usage directions below).

    The screen becomes black after the installation

    Press the home/PS button and close the browser manually. Installation should be successful.

    A bad plugin crashes device upon installation

    You can force all configuration to be reset by pressing R at the prompt when the bootstrap installer is launched. This is reset your taiHEN config.txt file as well as HENkaku settings.

    Offline Installer

    We now have a solution for people who do not have constant internet access. The HENkaku Offline Installer will hijack the Email application such that you can install HENkaku after reboot using the Email application instead of visiting the website. More details about this here.

    Using molecularShell

    The first time you install HENkaku, the molecularShell bubble will be added to your LiveArea. This will be your portal to installing homebrew.

    Installing Homebrew

    1. The homebrew package you wish to install should be a file with the .vpk extension.
    2. Make sure Wifi is enabled and you are connected to the same network as the host computer.
    3. Open «shell» by launching the bubble.
    4. Press SELECT to start a FTP server. Please note that the FTP server is not password protected. Only run it on a trusted local network.
    5. Note the IP address displayed in a message popup.
    6. Open your FTP client on the host computer and connect to that IP address.
    7. Navigate to «ux0» (this is the root of your memory card or internal storage) and you can upload the .vpk package here or in any subdirectory.
    8. Once you upload all the packages you wish to install you can disconnect the client.
    9. Back in molecularShell, press CIRCLE to stop the FTP server.
    10. Navigate to «ux0:» and then to where you placed the packages. To install, select the package and press X.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    FTP error

    Check if you have a firewall on the host computer. Also make sure you’re on the same network as the host.

    Not all files/devices are shown

    You need to enable unsafe homebrew mode. Open molecularShell and press Start. Then choose the option to enable unsafe homebrew. Back out of the menu, quit molecularShell, and relaunch it again.

    Running Homebrew

    Once you installed HENkaku, running homebrew is as simple as launching the installed bubble directly from LiveArea!

    Upgrading to 3.60

    Since only firmware 3.60 is supported, you can upgrade any Vita on a lower firmware version to 3.60 with these instructions. Be careful not to update to the latest version through official means or you will not be able to use HENkaku!

    Simple Instructions

    Set your DNS to {{ site.dns }} and choose to update from Wi-Fi. Proceed only if the message says «A new version of the system software is available. Firmware 3.60 (変革 Compatible)». That’s it!

    Detailed Instructions

    1. Open the Settings app
    2. Select «Network»
    3. Select «Wi-Fi Settings»
    4. If you are not connected to the internet, do so now. Select your current connection (there should be a green dot to the left).
    5. Select «Advanced Settings»
    6. Under «DNS Settings» choose «Manual»
    7. Under «Primary DNS» set it to {{ site.dns }}
    8. Leave «Secondary DNS» blank. Make sure «Proxy Server» is set to «Do Not Use». Press OK.
    9. Back out to the main settings screen. Select «System Update» and then «Update Using Wi-Fi.»
    10. If you get an error saying your system is up to date, that means either your Vita is on 3.60 already or your Vita is > 3.60 and is not supported by HENkaku
    11. Otherwise you will see a pop-up saying there is a new update. Make sure the message says «3.60 (変革 Compatible)»! If the message does not say that, do not proceed and try to repeat these steps to see if you missed something.
    12. After ensuring you are updating to «3.60 (変革 Compatible)», proceed with the steps on screen to update.
    13. After updating to 3.60, you can follow steps 1-5 again and then set «DNS Settings» back to «Automatic» to restore your DNS settings.

    Support

    Running into problems? You can find us on FreeNode IRC at #henkaku. Community support will also be provided in the forums.

    You are using an out of date browser. It may not display this or other websites correctly.
    You should upgrade or use an alternative browser.

    • Thread starter

      luis67


    • Start date

      Aug 3, 2016


    • Views
      15,243

    • Replies
      5

    Joined
    Aug 3, 2016
    Messages
    4
    Trophies
    0
    Age
    44
    XP

    84

    Country

    Greece

    • #1

    Molecularshell c1-6775-5 error again and again,i tried to format memory card,rebuild database,restore vita via recovery menu and clear all cache and cookies also tried this fix but nothing,the first time is working but when i reboot my vita this error appears
    Last edited by luis67,
    Aug 3, 2016

    • #2

    Did you try setting it to wumbo?

    Joined
    Jul 17, 2016
    Messages
    155
    Trophies
    0
    Age
    32
    XP

    161

    Country

    • #3

    so did you fix your problem?

    Joined
    Aug 3, 2016
    Messages
    4
    Trophies
    0
    Age
    44
    XP

    84

    Country

    Greece

    • #4

    Did you try setting it to wumbo?

    What do you mean?

    ——————— MERGED —————————

    so did you fix your problem?

    No i didn’t

    • #5

    What’s the problem here again? We knew from day one that once you power off the vita and turn it back on you will need to reinstall it from the web browser…

    If that’s your problem, that’s not a problem, it’s the way it works like the wii u kernel exploit that needs to be relaunched upon restarting the system.

    Joined
    Aug 3, 2016
    Messages
    4
    Trophies
    0
    Age
    44
    XP

    84

    Country

    Greece

    • #6

    What’s the problem here again? We knew from day one that once you power off the vita and turn it back on you will need to reinstall it from the web browser…

    If that’s your problem, that’s not a problem, it’s the way it works like the wii u kernel exploit that needs to be relaunched upon restarting the system.

    Ok thanks mate.I thought that this error it is not normal after power off-on my vita.

    Similar threads

    You may also like…

    Advertising (This ad goes away for registered users. You can Login or Register)

    luis67

    Posts: 20
    Joined: Sun Oct 07, 2012 2:38 pm

    c1-6775-5 error

    Molecularshell c1-6775-5 error again and again,i tried to format memory card,rebuild database,restore vita via recovery menu and clear all cache and cookies also tried this fix https://www.youtube.com/watch?v=ak5RSRQCMrc but nothing,the first time is working but when i reboot my vita this error appears

    Advertising

    CPUzX

    Moderator
    Posts: 276
    Joined: Thu Nov 28, 2013 8:25 pm
    Location: United Kingdom

    Re: c1-6775-5 error

    Post

    by CPUzX » Wed Aug 03, 2016 10:00 pm

    I kept getting that error on Metal Gear Solid HD, so I went into Molecular Shell and deleted my encrypted savedata and also renamed the molecular shell patch for the decryption of the game for it to boot as normal and it worked afterwards. It might have to do with you corrupting a configuration or a file somehow

    Advertising

    luis67

    Posts: 20
    Joined: Sun Oct 07, 2012 2:38 pm

    Re: c1-6775-5 error

    Post

    by luis67 » Thu Aug 04, 2016 4:56 am

    CPUzX wrote:I kept getting that error on Metal Gear Solid HD, so I went into Molecular Shell and deleted my encrypted savedata and also renamed the molecular shell patch for the decryption of the game for it to boot as normal and it worked afterwards. It might have to do with you corrupting a configuration or a file somehow

    I am using mortal kombat 9 cartidge version but i never had problem with this,the problem is inside molecular shell and i dion’t know what to do.

    layout title permalink weight

    page

    Usage

    /usage/

    1

    Installing HENkaku

    You must run the installer each time you reboot the device before you can launch any homebrew application. You do not need to reinstall when you place the device into sleep mode. If you press the power button once, you are in sleep mode and do not need to reinstall HENkaku. If you hold the power button and then choose the option to Power Off, then you do need to reinstall HENkaku. You also need to reinstall if the battery runs out. Installing HENkaku requires an internet connection.

    The first time you install HENkaku, a new bubble named «molecularShell» will show up in LiveArea. This application allows you to install other homebrew bubbles. However, once you reboot the device, molecularShell and any other homebrew bubbles you installed will not be able to be launched until you run the installer again.

    {: .text-danger}
    It is important that you never update your Vita past 3.60 if you ever wish to use HENkaku now or in the future. If you do update, all your installed homebrew will no longer work and you cannot install any homebrew in the future.

    Installation

    1. {:class=»text-warning»}Make sure your Vita is running firmware 3.60
    2. Open the Web Browser application and visit {{ site.url }}
    3. Press the «Install» button
    4. Once the installation is complete, the browser will be closed automatically

    Hint: If you’ve installed HENkaku before, you can install it again directly from molecularShell’s LiveArea. Just open the «shell» bubble and use the orange «install» button.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    The web browser shows grey «Please wait…» screen

    This is normal. Just wait for it, eventually it should load the page and trigger the exploit.

    The web browser crashes (error C2-12828-1) and an error report dialog appears

    Press «OK» and try again. If the browser crashes more than three times in a row, you can quit the browser (Press the PS button and swipe the LiveArea page from the top right corner or hold the «O» or «X» button depending on your region). Then you can re-attempt installation.

    If you quit the browser and this still happens more than three times in a row, you should reboot the system and try again.

    If the web browser keeps crashing, and you’ve already rebooted your Vita at least five times in a row, try the following:

    • Delete your cookies. To do that, open the web browser, open the menu and click on «Delete Cookies».
    • Close all your web browser tabs, reboot PS Vita and try going to {{ site.url }}/go/ directly, without visiting {{ site.url }}.
    • Try switching to another internet connection: a firewall or your ISP could be interfering with the proper operation of the exploit.

    The device freezes or reboots after trying to install

    If the device froze, hold the power button for 15 seconds to manually power off the device and then press the power button again to restart the device. You can then attempt to install again.

    The web browser automatically closed after installation

    That is the expected behavior. HENkaku should now be installed. You can launch homebrew applications including molecularShell (see usage directions below).

    The screen becomes black after the installation

    Press the home/PS button and close the browser manually. Installation should be successful.

    A bad plugin crashes device upon installation

    You can force all configuration to be reset by pressing R at the prompt when the bootstrap installer is launched. This is reset your taiHEN config.txt file as well as HENkaku settings.

    Offline Installer

    We now have a solution for people who do not have constant internet access. The HENkaku Offline Installer will hijack the Email application such that you can install HENkaku after reboot using the Email application instead of visiting the website. More details about this here.

    Using molecularShell

    The first time you install HENkaku, the molecularShell bubble will be added to your LiveArea. This will be your portal to installing homebrew.

    Installing Homebrew

    1. The homebrew package you wish to install should be a file with the .vpk extension.
    2. Make sure Wifi is enabled and you are connected to the same network as the host computer.
    3. Open «shell» by launching the bubble.
    4. Press SELECT to start a FTP server. Please note that the FTP server is not password protected. Only run it on a trusted local network.
    5. Note the IP address displayed in a message popup.
    6. Open your FTP client on the host computer and connect to that IP address.
    7. Navigate to «ux0» (this is the root of your memory card or internal storage) and you can upload the .vpk package here or in any subdirectory.
    8. Once you upload all the packages you wish to install you can disconnect the client.
    9. Back in molecularShell, press CIRCLE to stop the FTP server.
    10. Navigate to «ux0:» and then to where you placed the packages. To install, select the package and press X.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    FTP error

    Check if you have a firewall on the host computer. Also make sure you’re on the same network as the host.

    Not all files/devices are shown

    You need to enable unsafe homebrew mode. Open molecularShell and press Start. Then choose the option to enable unsafe homebrew. Back out of the menu, quit molecularShell, and relaunch it again.

    Running Homebrew

    Once you installed HENkaku, running homebrew is as simple as launching the installed bubble directly from LiveArea!

    Upgrading to 3.60

    Since only firmware 3.60 is supported, you can upgrade any Vita on a lower firmware version to 3.60 with these instructions. Be careful not to update to the latest version through official means or you will not be able to use HENkaku!

    Simple Instructions

    Set your DNS to {{ site.dns }} and choose to update from Wi-Fi. Proceed only if the message says «A new version of the system software is available. Firmware 3.60 (変革 Compatible)». That’s it!

    Detailed Instructions

    1. Open the Settings app
    2. Select «Network»
    3. Select «Wi-Fi Settings»
    4. If you are not connected to the internet, do so now. Select your current connection (there should be a green dot to the left).
    5. Select «Advanced Settings»
    6. Under «DNS Settings» choose «Manual»
    7. Under «Primary DNS» set it to {{ site.dns }}
    8. Leave «Secondary DNS» blank. Make sure «Proxy Server» is set to «Do Not Use». Press OK.
    9. Back out to the main settings screen. Select «System Update» and then «Update Using Wi-Fi.»
    10. If you get an error saying your system is up to date, that means either your Vita is on 3.60 already or your Vita is > 3.60 and is not supported by HENkaku
    11. Otherwise you will see a pop-up saying there is a new update. Make sure the message says «3.60 (変革 Compatible)»! If the message does not say that, do not proceed and try to repeat these steps to see if you missed something.
    12. After ensuring you are updating to «3.60 (変革 Compatible)», proceed with the steps on screen to update.
    13. After updating to 3.60, you can follow steps 1-5 again and then set «DNS Settings» back to «Automatic» to restore your DNS settings.

    Support

    Running into problems? You can find us on FreeNode IRC at #henkaku. Community support will also be provided in the forums.

    layout title permalink weight

    page

    Usage

    /usage/

    1

    Installing HENkaku

    You must run the installer each time you reboot the device before you can launch any homebrew application. You do not need to reinstall when you place the device into sleep mode. If you press the power button once, you are in sleep mode and do not need to reinstall HENkaku. If you hold the power button and then choose the option to Power Off, then you do need to reinstall HENkaku. You also need to reinstall if the battery runs out. Installing HENkaku requires an internet connection.

    The first time you install HENkaku, a new bubble named «molecularShell» will show up in LiveArea. This application allows you to install other homebrew bubbles. However, once you reboot the device, molecularShell and any other homebrew bubbles you installed will not be able to be launched until you run the installer again.

    {: .text-danger}
    It is important that you never update your Vita past 3.60 if you ever wish to use HENkaku now or in the future. If you do update, all your installed homebrew will no longer work and you cannot install any homebrew in the future.

    Installation

    1. {:class=»text-warning»}Make sure your Vita is running firmware 3.60
    2. Open the Web Browser application and visit {{ site.url }}
    3. Press the «Install» button
    4. Once the installation is complete, the browser will be closed automatically

    Hint: If you’ve installed HENkaku before, you can install it again directly from molecularShell’s LiveArea. Just open the «shell» bubble and use the orange «install» button.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    The web browser shows grey «Please wait…» screen

    This is normal. Just wait for it, eventually it should load the page and trigger the exploit.

    The web browser crashes (error C2-12828-1) and an error report dialog appears

    Press «OK» and try again. If the browser crashes more than three times in a row, you can quit the browser (Press the PS button and swipe the LiveArea page from the top right corner or hold the «O» or «X» button depending on your region). Then you can re-attempt installation.

    If you quit the browser and this still happens more than three times in a row, you should reboot the system and try again.

    If the web browser keeps crashing, and you’ve already rebooted your Vita at least five times in a row, try the following:

    • Delete your cookies. To do that, open the web browser, open the menu and click on «Delete Cookies».
    • Close all your web browser tabs, reboot PS Vita and try going to {{ site.url }}/go/ directly, without visiting {{ site.url }}.
    • Try switching to another internet connection: a firewall or your ISP could be interfering with the proper operation of the exploit.

    The device freezes or reboots after trying to install

    If the device froze, hold the power button for 15 seconds to manually power off the device and then press the power button again to restart the device. You can then attempt to install again.

    The web browser automatically closed after installation

    That is the expected behavior. HENkaku should now be installed. You can launch homebrew applications including molecularShell (see usage directions below).

    The screen becomes black after the installation

    Press the home/PS button and close the browser manually. Installation should be successful.

    A bad plugin crashes device upon installation

    You can force all configuration to be reset by pressing R at the prompt when the bootstrap installer is launched. This is reset your taiHEN config.txt file as well as HENkaku settings.

    Offline Installer

    We now have a solution for people who do not have constant internet access. The HENkaku Offline Installer will hijack the Email application such that you can install HENkaku after reboot using the Email application instead of visiting the website. More details about this here.

    Using molecularShell

    The first time you install HENkaku, the molecularShell bubble will be added to your LiveArea. This will be your portal to installing homebrew.

    Installing Homebrew

    1. The homebrew package you wish to install should be a file with the .vpk extension.
    2. Make sure Wifi is enabled and you are connected to the same network as the host computer.
    3. Open «shell» by launching the bubble.
    4. Press SELECT to start a FTP server. Please note that the FTP server is not password protected. Only run it on a trusted local network.
    5. Note the IP address displayed in a message popup.
    6. Open your FTP client on the host computer and connect to that IP address.
    7. Navigate to «ux0» (this is the root of your memory card or internal storage) and you can upload the .vpk package here or in any subdirectory.
    8. Once you upload all the packages you wish to install you can disconnect the client.
    9. Back in molecularShell, press CIRCLE to stop the FTP server.
    10. Navigate to «ux0:» and then to where you placed the packages. To install, select the package and press X.

    Troubleshooting

    Error C1-6775-5 when launching molecularShell

    You must run the HENkaku installer again. Follow the directions above.

    FTP error

    Check if you have a firewall on the host computer. Also make sure you’re on the same network as the host.

    Not all files/devices are shown

    You need to enable unsafe homebrew mode. Open molecularShell and press Start. Then choose the option to enable unsafe homebrew. Back out of the menu, quit molecularShell, and relaunch it again.

    Running Homebrew

    Once you installed HENkaku, running homebrew is as simple as launching the installed bubble directly from LiveArea!

    Upgrading to 3.60

    Since only firmware 3.60 is supported, you can upgrade any Vita on a lower firmware version to 3.60 with these instructions. Be careful not to update to the latest version through official means or you will not be able to use HENkaku!

    Simple Instructions

    Set your DNS to {{ site.dns }} and choose to update from Wi-Fi. Proceed only if the message says «A new version of the system software is available. Firmware 3.60 (変革 Compatible)». That’s it!

    Detailed Instructions

    1. Open the Settings app
    2. Select «Network»
    3. Select «Wi-Fi Settings»
    4. If you are not connected to the internet, do so now. Select your current connection (there should be a green dot to the left).
    5. Select «Advanced Settings»
    6. Under «DNS Settings» choose «Manual»
    7. Under «Primary DNS» set it to {{ site.dns }}
    8. Leave «Secondary DNS» blank. Make sure «Proxy Server» is set to «Do Not Use». Press OK.
    9. Back out to the main settings screen. Select «System Update» and then «Update Using Wi-Fi.»
    10. If you get an error saying your system is up to date, that means either your Vita is on 3.60 already or your Vita is > 3.60 and is not supported by HENkaku
    11. Otherwise you will see a pop-up saying there is a new update. Make sure the message says «3.60 (変革 Compatible)»! If the message does not say that, do not proceed and try to repeat these steps to see if you missed something.
    12. After ensuring you are updating to «3.60 (変革 Compatible)», proceed with the steps on screen to update.
    13. After updating to 3.60, you can follow steps 1-5 again and then set «DNS Settings» back to «Automatic» to restore your DNS settings.

    Support

    Running into problems? You can find us on FreeNode IRC at #henkaku. Community support will also be provided in the forums.

    Мобильные приложения

    [pvc1 в 09:27|10 Фев 2023] 

     

    Прошивки и программы для PlayStation Vita

    [pvc1 в 09:10|09 Фев 2023] 

     

    Приложения для PlayStation 4

    [pvc1 в 09:05|09 Фев 2023] 

     

    ПК программы для PlayStation 2

    [pvc1 в 09:59|08 Фев 2023] 

     

    ПК софт для PlayStation 4

    [pvc1 в 10:05|07 Фев 2023] 

     

    ПК софт для PlayStation 4

    [pvc1 в 09:59|07 Фев 2023] 

     

    Прошивки и программы для PlayStation Vita

    [pvc1 в 09:44|06 Фев 2023] 

     

    Прошивки и программы для PlayStation Vita

    [pvc1 в 09:39|06 Фев 2023] 

     

    Железные вопросы PlayStation 2

    Мобильные приложения

    [pvc1 в 09:16|03 Фев 2023] 

     

    ПК программы для PlayStation 2

    [pvc1 в 09:04|03 Фев 2023] 

     

    Прошивки и приложения для PlayStation 3

    [pvc1 в 09:48|02 Фев 2023] 

     

    Общая дискуссия по PlayStation 5

    [pvc1 в 09:04|02 Фев 2023] 

     

    ПК софт для PlayStation 4

    [pvc1 в 08:52|02 Фев 2023] 

     

    Приложения для PlayStation 2

    Прошивки и приложения для PlayStation 3

    [pvc1 в 10:36|01 Фев 2023] 

     

    Об играх PlayStation Vita

    [pvc1 в 09:29|31 Янв 2023] 

     

    Прошивки и программы для PlayStation Vita

    [pvc1 в 08:36|31 Янв 2023] 

     

    ПК софт для PlayStation 4

    [pvc1 в 10:04|30 Янв 2023] 

     

    Прошивки и программы для PlayStation Vita

    [pvc1 в 08:59|30 Янв 2023] 

     

    Прошивки и программы для PlayStation Vita

    [pvc1 в 19:29|29 Янв 2023] 

     

    Прошивки и приложения для PlayStation 3

    [pvc1 в 09:06|29 Янв 2023] 

     

    Приложения для PlayStation 5

    [pvc1 в 11:45|26 Янв 2023] 

     

    Прошивки и приложения для PlayStation 3

    [pvc1 в 09:27|24 Янв 2023] 

     

    Приложения для PlayStation 2

    Приложения для PlayStation 2

    ПК софт для PlayStation 4

    [pvc1 в 10:48|19 Янв 2023] 

     

    Прошивки и программы для PlayStation Vita

    [pvc1 в 10:35|18 Янв 2023] 

     

    Приложения для PlayStation 2

    Общая дискуссия по PlayStation 3

    [m951 в 03:46|18 Янв 2023] 

     

    ПК программы для PlayStation 2

    [pvc1 в 15:17|16 Янв 2023] 

     

    Прошивки и приложения для PlayStation 3

    [pvc1 в 14:59|16 Янв 2023] 

     

    Общая дискуссия по PlayStation 5

    [pvc1 в 10:38|13 Янв 2023] 

     

    Общая дискуссия по PlayStation 2

    Эмуляторы для PlayStation Vita

    [pvc1 в 12:26|11 Янв 2023] 

     

    Приложения для PlayStation 4

    [pvc1 в 19:37|08 Янв 2023] 

     

    ПК программы для PlayStation 3

    [pvc1 в 16:58|08 Янв 2023] 

     

    Приложения для PlayStation 2

    Об играх PlayStation 2

    Мобильные приложения

    ПК софт для PlayStation 5

    [pvc1 в 09:26|04 Янв 2023] 

     

    Программы и Приложения для PlayStation Portable

    [pvc1 в 19:05|03 Янв 2023] 

     

    Программы и Приложения для PlayStation Portable

    [pvc1 в 18:59|03 Янв 2023] 

     

    ПК софт для PlayStation 4

    [pvc1 в 16:48|01 Янв 2023] 

     

    Общая дискуссия по PlayStation 1

    [pvc1 в 09:51|23 Дек 2022] 

     

    ПК программы для PlayStation 2

    [pvc1 в 09:10|17 Дек 2022] 

     

    Мобильные приложения

    [pvc1 в 09:31|16 Дек 2022] 

     

    Приложения для PlayStation 2

    Программы и Приложения для PlayStation Portable

    [pvc1 в 08:50|13 Дек 2022] 

     

    Эмуляторы для PlayStation Vita

    [pvc1 в 08:49|13 Дек 2022] 

     

    Понравилась статья? Поделить с друзьями:
  • Произошла ошибка battle net при добавлении телефона
  • Произошла ошибка 80710a06 при установке hen
  • Произошла ошибка 80550f17
  • Произошла ошибка 80023102
  • Произошла ошибка 80010514 на ps3