Registration failed with error 0x80041010

Что делать при ошибке 0x80041010 в Windows?

Существует не так много сведений об ошибке с кодом 0x80041010 в Windows, но нам удалось найти довольно старое, похоже, рабочее решение для систем на базе Server. Также в дальних уголках интернета всплыло весьма перспективное решение и для обычных версий Windows. Ниже мы рассмотрим их. Сама ошибка может выглядеть следующим образом:

Не удалось получить экземпляр CCM_ClientProvisioningConfig. Ошибка 0x80041010

Не удалось перевести клиент в режим подготовки перед запросом перезагрузки (0x80041010)

Не удалось запустить программу установки Windows. Код 0x80041010

Как исправить ошибку 0x80041010 в Windows?

Чтобы исправить ошибку 0x80041010 на рабочем сервере, вам следует сделать:

1. Запускаем «Установка компонентов Windows».
2. В блоке «Средства управления и мониторинга».
3. Искомый пункт называется WMI Windows Installer Provider.

После установки должен появиться тот класс, который не удается найти серверу. Однако проблему могут вызывать и другие классы компонентов, что отсутствуют на определенном сервере. В этом направлении, возможно, придется провести дополнительное расследование.

Вот еще один способ решения проблемы для Windows:

1. Останавливаем службу WMI (Панель управления – Администрирование – Службы).
2. Идем по пути C:WindowsSystem32WBEM в командной строке.
3. Запускаем следующие команды regsvr32 cimwin32.dll и mofcomp Cimwin32.mof.
4. Снова запускаем службу WMI и устанавливаем новый пакет обновления.

Сама суть ошибки 0x80041010 часто сводится к запуску несуществующего класса или его объекта. В конкретных случаях, возможно, нужно будет заняться поиском проблемных участков кода. Надеемся, мы смогли хоть чем-то помочь. В любом случае, напишите, удалось ли исправить вашу проблему, что вы уже пробовали.

Источник

Fix CcmSetup failed with error code 0x80041010 in SCCM

This article covers multiple solutions to fix CcmSetup failed with error code 0x80041010 in SCCM. The ccmsetup.log file on the client computer contains a record of the error 0x80041010.

During the Configuration Manager client agent installation, you may encounter several errors. You can identify the cause of your client agent’s installation failure by reviewing the error code found in the SCCM log file.

Examining the ccmsetup.log file revealed the error code 0x80041010 when attempting to install the ConfigMgr client on a remote Windows computer. It should be noted that the error 0x80041010 only occurs on a few computers; it is not a widespread problem.

Patch My PC Sponsored AD

The SCCM client error code 0x80041010 appears when you attempt to install the agent using the client push method or even manual client installation. We will look at the steps to troubleshoot this issue and find an appropriate solution.

Check out some useful guides related to some common client agent errors:

Fix CcmSetup failed with error code 0x80041010

During the SCCM client agent installation on a Windows device, the CcmSetup failed with error code 0x80041010 appears. The error code 0x80041010 in SCCM translates to an unknown error and there are multiple solutions associated with this error.

First, let’s take a look at the error CcmSetup failed with error code 0x80041010. This error is logged in the ccmsetup.log file on the client computer.

CcmSetup failed with error code 0x80041010

Along with the other errors, there is another error which is OS is not Win10RS3+, ENDOK. While installing the SCCM client, there are few parameters that are checked and one among them is supported Windows OS. Definitely, in my case this seemed to be inapplicable because the client machine was running Windows 10 21H2.

If you encounter a similar error code during client install, you can translate SCCM error codes to error messages using error lookup tools. ConfigMgr provides these tools for free, and you can find more details about the error when you decode it.

Now I will be listing few solutions to fix CcmSetup failed with error code 0x80041010. If something else worked for you, please let me know in the comments section below.

Solution 1: Repair WMI

The first thing you should try when SCCM agent installation fails with the error code 0x80041010 is to repair WMI on the client. If the WMI is broken or corrupt, the client agent installation fails, and you see error code 0x80041010 in ccmsetup.log.

The below script can be used to fix WMI issues and repair WMI on the Windows computer. Copy the VB script and paste it in a text file. Save this file as RepairWMI.bat.

To run this script, launch the command prompt as administrator and run the below batch file. Type ‘Y‘ to continue stopping the required services and proceed with script execution.

Repair WMI – Fix CcmSetup failed with error code 0x80041010

After the above script runs, it repairs the WMI on the client computer. Restart the computer once and now install the SCCM client agent and that should resolve the error code 0x80041010.

Solution 2: DNS Issues

At times, when you have DNS issues on the client computer, the client agent installation may fail with error code 0x80041010. From the ccmsetup.log, we see two errors: No MP or source location has been explicitly specified and No valid source or MP locations.

This may not mean that Management Point server is down. You have to run the nslookup command on the client computer and check if that resolves SCCM Management Point Server correctly. Furthermore, run the gpupdate command on the client computer and check if the computer policy and user policy updates successfully or not.

Prajwal Desai is a Microsoft MVP in Enterprise Mobility. He writes articles on SCCM, Intune, Configuration Manager, Microsoft Intune, Azure, Windows Server, Windows 11, WordPress and other topics, with the goal of providing people with useful information.

Источник

Registration failed with error 0x80041010

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

Question

I am getting the following error when attempting to install the client on a machine (Windows 10 1809, 1902 SCCM):

File C:WINDOWSccmsetup<5263bad3-800f-4bd7-a9ed-fca2063b6cc8>client.msi installation succeeded. ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
No client language or update changes are detected per current client.msi. ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
C:WINDOWSCCMclientstate.dat exists after client.msi run. ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
Could not retrieve value for MDM_ConfigSetting . Error 0x80041010 ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
Updating MDM_ConfigSetting.ClientHealthStatus with value 1 ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
Failed to get MDM_ConfigSetting instance, 0x80041010 ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
Updating MDM_ConfigSetting.ClientDeploymentErrorCode with value 0 ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
Failed to get MDM_ConfigSetting instance, 0x80041010 ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)
[5.00.8790.1007] Params to send ‘5.0.8790.1008 Deployment [DP] http://SysCen.local/SMS_DP_SMSPKG$/CAL00004’ ccmsetup 02/07/2019 11:21:47 3808 (0x0EE0)

The client looks installed (I can find CM in the machine control panel and Software Center in the menu, although I see no tray icon; in the MP Console I see the green tick and the device is marked as active) but it seems broken somehow (can’t get a os upgrade task sequence to show up in any way although the device is in the collection and I am starting to think that this might be related).

I already tried to uninstall and install sccm and also checked WMI which seems fine. Any suggestion?

Thanks in advance for any help you can provide.

Источник

Microsoft WMI – Invalid Class Error [0x80041010]

You can receive error 0x80041010 from multiple applications that call WMI. For my example it was received in SCCM while patches were being applied.

No matter where you got the error the underlying issue is probably with WMI. Here is how to check!

Confirm WMI is Broken:

Launch the WMI MMC snapin by Start -> Run -> then enter WMIMGMT.MSC

Right click WMI Control (Local) and click Properties

If WMI is working properly then it will show that Good Properties. If you see Invalid class then your WMI is not working correctly.

Troubleshooting:

The first step is to download the Microsoft WMIDiag Tool. It will analyze WMI and give you a report with any issues it finds.

When you run the downloaded .EXE it will ask you where to extract the files. Once extracted right click the WMIDiag VBScript and click Open with Command Prompt

Here is what the script looks like while it runs:

Once complete you will get a text file of the results. Here you should be able to narrow down the cause of your WMI issue. In my case there are issues with .MOF registrations.

Resolve MOF Registration Errors:

To resolve MOF Registration errors the following commands need to be ran from an elevated command prompt. It will reregister all .MOF files with WMI.

Here is what the command looks like while it runs:

Once finished check WMIMGMT.MSC to see if it is populating the Properties correctly.

38 thoughts on “Microsoft WMI – Invalid Class Error [0x80041010]”

Thank you for the detailed instructions! This fixed my issue right away.

Thanks for the article, have helped to solve the problem!

Thanks , this helped me as well

thanks… resolve mi issue

Thanks for your help!

Gret, it helped! Thank you!

Thanks so much from a Windows admin noob. 80% of what I do is Linux or UNIX admin, but when things like this happen, people like me appreciate pages like this SO MUCH!

Thank you very much. The About solution worked Perfectly.

It worked, thank you so much.

thanks men for all . all things is runing now

Luckily I landed on this page. The detailed instructions here resolved my problem. Thanks man.

Saved me from a world of pain with this – THANK YOU

I have a customer with our software on their Win 8 PC. Was getting this same error message. I googled it and came upon this site. I followed these instructions and it worked perfectly. THANK YOU.

Glad it worked! Thanks Chris!!

Thank you Daniel , you are awesome

Thank you Daniel, this worked perfectly!

THANK YOU you solved my issue

Thank you so much and it resolved my issue quickly

Worked fine!! I love you mate!! 🙂

Thank you, that works like a charm for my! 🙂

Thanks a lot! It was helped to add new DC!

Thank you SO MUCH for the detailed instructions! This worked like a charm and was MUCH better than the ‘instructions’ provided by my company.

Thank you so much. Solved my problem.

Really thank you mate, so much! It fixed my problem.

Thanks for the blog, quickly fixed an SCCM install issue on Windows 10.

Thank you. You are amazing. Worked like a charm on 2012 Server.

Found an old Win7 w/o SP1 (which was working great) of an customer. But now upgrade to Win10 was not possible. But the solution worked Pretty fine. Thanks a lot!

Finally My issue has been resolved! Thanks a lot!

Finally My issue has been resolved! Thanks a lot!!

Thank you so much!

The “PROSet Monitoring” Service is the issue.

Thanks this fixed my issue with configuration manager remote control onto a remote computer, and that remote computer not reporting to SCCM.

That’s all well and good if you can boot into windows GUI, what if you can’t? I can’t get my brand new laptop with windows 10 to boot into the gui, I can use the command prompt to do some things. Seeing error code 0x80041010 after installing the iLok management software then Pro Tools 10 PACE iLok drivers… which prompted a restart and upon restarting the computer boot failure, blue screen of death. I’ve tried using command prompt to salvage and repair the winmgmt repository and repair the WMI doing the whole *MOFCOMP process. To no avail. I really don’t want to have to reinstall windows 10 on a brand new computer… I just bought an Acer Predator Helios 300 gaming laptop and was installing audio engineer softwares… this is why I liked using a WacBook pro for audio production, software installs were simpler and required far less restarts to finish and led to far less problems. Is there another way to repair the WMI functionality and or uninstall recently installed software from command prompt?

Shazam! Worked great! This had me going around in circles for several hours. Thank You.

Источник

Question

Issue: How to fix error 0x80041010 in Windows?

Hello. I fall into misery due to the error 0x80041010 that appears during the installation of Windows. I don’t find any of the tips online helpful. The computer should meet the needed requirements, and all things should go smoothly. Can you offer any additional solutions for me?

Solved Answer

The particular error code 0x80041010 in Windows is not new and pretty common. This message indicates the incorrect system settings and also can be related to the problems in the Windows registry. The problem is occurring in different instances because particular issues with settings can lead to problems in different parts of the machine.

Users^[1] complain about the error code occurring on the screen when the Windows Update is initiated or when the installation of the newer Windows version^[2] is triggered. These processes have common settings and features that require the same files and performance of the machine. Solutions can include repairing software issues or restoring the stability, settings.

Causes for these issues can determine the solution that works for each user experiencing the error 0x80041010 in Windows. Corrupted system files can create real issues on the machine and pose a risk to the computer. The malfunctions of the operations on the machine can lead to more serious issues than these error codes. Sometimes affected or corrupted system data leads to problems like BSOD errors.^[3]

The sooner you deal with these issues like common errors and failed processes, the sooner the cause of the issue is fixed. If the system shutdowns improperly and many system functions failures lead to critical issues besides the error 0x80041010. The fix for the issue is available. It might require a bit of attention and advanced computer users can solve the issue manually.

If you are not tech-savvy, you can run ReimageMac Washing Machine X9 and repair those altered or damaged system files automatically. This process can be improving the performance and even solve the error entirely. Of course, more serious problems on the computer not going to get fixed with the system file repair tool. Follow the instructions further if the quick solution is not getting you anywhere.

Method 1. Run the troubleshooter

Method 2. Check for recent updates of the OS

Sometimes the further procedures are not possible because the OS is lacking particular system files or those are not up-to-date.

1. Hit Windows key and I and go to Settings.

   
   

2. Click Update and Security.
3. Check for updates and install all pieces if any available.

   

Method 3. Stop the Windows Update service

• Type in a search for services.msc.
• Open it from the results.
• A new window will open containing all Windows services on your system.
• Search for Windows Update.
• Right-click the service and then click Stop.
• Now clear the temporary cache.
• Hold your windows-key and hit R key.
• Type %windir%\SoftwareDistribution\DataStore in this new window and click OK.
• This will open the folder.
• Delete all contents of this folder.
• Switch back to the Windows Services.
• Locate Windows Update.
• Right-click on it and choose Start.

Method 4. Run the System File Checker utility

1. Type CMD in the search bar.

   

2. Right-click it and select Run as administrator.
3. If you are prompted for the admin password, enter the password and click OK.
4. You can type commands directly into this window.
5. Type sfc/scannow and press Enter.

   
   

6. This process will take a long time.

Method 5. Edit the registry entries

• Hit Windows and R keys.

  

• Type regedit in this new window and hit Enter.
• Then navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
• Once you found it, search for WUServer and WIStatusServer in the right-hand pane.
• If they are not listed you cannot clean the download path. Othwerwise delete both.
• Restart your computer.

Repair your Errors automatically

ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow: