Remeshing error encountered zbrush

ZBrush — Fix the «ERROR: Zremeshing error encountered.» Can be fixed a couple of different ways.

Просмотров: 2 772

somegreybloke

Thanks very much!

Not worked for me. I already mailed my working project, would you please check it out

Dmitry Fom

GAURAV BHARDWAJ

Sir my zremesher change the subtool in different subtool

ROYALz CREATION

Hard Korvin

ItalianDragon

Thanks a ton ofr this video ! I was having the issue and the «weld identical points» thing did it for me 😀

ThisPez

Thank you so much uwu

JotoheKian

Thank you. Very handy.

Naomi Noxious

Thanks so much! I love a to the point video where the results actually happen for me, too.

userdexter

Thanks man! You are my hero!!

Shedyra Dib

Thank you, kind sir!

Alan Maya

da.nilkaz

Thank you so much!

lucki1986

Jeez I have not been able to use zremesher 3.0 since he came out. can’t wait to try will it finally work 😀

hello sean forsyth im a learning beginner blender and zbrush. im having a trouble of zremeshing the mesh. the problem is that when i zremesh my cloth that has folds and hard edges they get deformed like more curvish delets all the edges and makes it very curvature like some has smoothed all the edges, and the size too cause of deformation the size gets very smaller than the original. what would be the problem?? my process was first dynamesh and subdivide to 3 then after i fisnished with dynamesh work, i did an zremesher for detailed works subdived till 4 after i finished it i tried to make low poly zremesher and thats where the problem happended got low poly but lost lots of part that made smaller and curvishy.

matt fasci2

thank you a lot for your kind support! great and useful video. i solved it

Источник

«Error has been encountered while trying to save brush preset. Saving has been aborted» — ошибка кисти в Zbrush, как решил

Всем читающим данный пост — Привет! Удалось своеобразным способом решить проблему с кистями в Zbrush, после загрузки которых в папку «ZBrushes» была следующая проблема.

Когда запускал кисть в программе Zbrush через «LightBox»- «Brush» — далее выбирал папку с кистями и саму кисть в формате «ZBP».То всплывала проблема, которая помечалась надписью «Error has been encountered while trying to save brush preset. Saving has been aborted».

Что переводится через Гугл переводчик, как «произошла ошибка при попытке сохранить предварительную настройку кисти, сохранение было прервано».

Помучался над этой проблемой какое-то время (много времени) и нашёл выход.

Первоначально кисти загружал в папку, расположенную по адресу — C:Program FilesPixologicZBrush 2020.1.3ZBrushes.

Понял, что в этой папке работают только кисти исключительно формата «.ZBP» . «Мои» же неработающие кисти, как раз содержали ещё помимо файла «.ZBP» и дополнительные альфы в формате «.PSD».

Далее начал грузить кисти в другую папку, по адресу — C:Program FilesPixologicZBrush 2020.1.3ZStartupBrushPresets. Перетаскивал именно папку с кистями. В этом была ошибка, что они снова не работали. Точнее, их даже нельзя было найти в Zbrush. Потом просто в распакованном виде, без папок, перебросил их туда.

В программе Zbrush их можно отыскать в разделе кистей «Brush». Обычно это меню располагается в интерфейсе слева. Либо его можно раскрыть через кнопку «B» на клавиатуре. Кисти располагаются внизу списка.

Минус этого способа в том, что если много кистей загружать, то они будут занимать значительное место среди стандартных кистей. Но их всегда потом можно будет удалить в случай чего в папке «BrushPresets». Путь к нему указан выше.

Не претендую на идеальное решение. Просто рассказал, как сам вышел из такого тупика! Может быть и Вам поможет! Удачи!

Источник

ZBrush — Fix the «ERROR: Zremeshing error encountered.» Can be fixed a couple of different ways.

Sean Forsyth

ZBrush — Fix the ERROR: Zremeshing error encountered. There are a couple of different ways to fix this, see them here. #zbrush #zbrushtutorial #zremeshererror #zremesher Click to subscribe: 🤍🤍youtube.com/c/seanforsythtutorials?sub_confirmation=1 — Join me on my social channels: 🤍sforsyth.artstation.com/ 🤍🤍instagram.com/seanforsyth/ 🤍🤍linkedin.com/in/seanforsyth/ 🤍gumroad.com/seanforsyth — This channel is dedicated to teaching ZBrush tips and tricks, and gives away free content such as brushes or models from time to time. Feel free to leave comments and suggestions for future tutorials — I’m always open to suggestions!

Not worked for me. I already mailed my working project, would you please check it out

Sir my zremesher change the subtool in different subtool

Thanks a ton ofr this video ! I was having the issue and the «weld identical points» thing did it for me 😀

Thank you so much uwu

Thank you. Very handy.

Thanks so much! I love a to the point video where the results actually happen for me, too.

Thanks man! You are my hero!!

Thank you, kind sir!

Thank you so much!

Jeez I have not been able to use zremesher 3.0 since he came out. can’t wait to try will it finally work 😀

hello sean forsyth im a learning beginner blender and zbrush. im having a trouble of zremeshing the mesh. the problem is that when i zremesh my cloth that has folds and hard edges they get deformed like more curvish delets all the edges and makes it very curvature like some has smoothed all the edges, and the size too cause of deformation the size gets very smaller than the original. what would be the problem?? my process was first dynamesh and subdivide to 3 then after i fisnished with dynamesh work, i did an zremesher for detailed works subdived till 4 after i finished it i tried to make low poly zremesher and thats where the problem happended got low poly but lost lots of part that made smaller and curvishy.

Источник

Remeshing Error Encountered

We have collected for you the most relevant information on Remeshing Error Encountered, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Remeshing Error Encountered before you, so use the ready-made solutions.

Moldflow: Error Encountered problems while meshing a face .

https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/Error-Encountered-problems-while-meshing-a-face.html

Encountered problem when meshing face ###. Second attempt: Trying to recover from previous error(s). Retrying the mesh process using a fallback tessellation method. Mesh density defined on faces will not be used by this approach. The generated mesh does not have precise match at cad bodies interface as expected.

Error-Automatic remeshing — COMSOL Multiphysics

https://www.comsol.com/forum/thread/34371/error-automatic-remeshing

Mar 09, 2016 · I encountered a problem about «Automatic remeshing» with «deformed geomerty» and Time-Dependent Solver When I ran the program, Comsol always displayed a Error: Unsupported operation on this type of object. -Feature: Time-Dependent Solver 1 (sol1/t1); -Error: Unsupported operation on this type of object.

Zbrush: ZRemesher won’t work — polycount

https://polycount.com/discussion/149156/zbrush-zremesher-wont-work

Okay I have some new problems now. For some reason I have no idea why I’m having difficulty with z-remesh again. I figured this out back when I was working with my red riding hood model, but for some strange reason when I z-remesh the entire model, the program does not …

Remeshing_ ANSYS 14.0_ System Coupling — CFD Online .

https://www.cfd-online.com/Forums/ansys/100496-remeshing_-ansys-14-0_-system-coupling.html

Nov 02, 2016 · But my problem is that the dynamic mesh (Remeshing), it doesn’t work. So the System Coupling gives error, because the mesh of the Fluid. The message de error: “Update failed for the Solution component in System Coupling. System coupling run completed with errors. Additional information: One or more elements have become highly distorted.

Remesh if optimisation runs into element quality error .

https://insider.altairhyperworks.com/remesh-optimisation-runs-element-quality-error/

Mar 18, 2014 · By activating the REMESH option in opti control, remeshing will be activated to improve element quality if there is an element quality error is encountered. After the remesh, the optimisation will then continue based on the remeshed model. Download the Entire Tip>>

[ANSYS Meshing] Meshing error encountered — CFD Online .

https://www.cfd-online.com/Forums/ansys-meshing/199128-meshing-error-encountered.html

Feb 28, 2018 · 2.5e-03mm with a 20% growth rate and for 20 layers. The software does the meshing but says » Invalid geo element encountered meshing aborted» but it displays a mesh. When I simulate it in fluent after about 80 -100 iterations it is diverging. I am not able to make out if the problem is with the mesh or with the geometry. Please help.

Remeshing ZBrush Docs

http://docs.pixologic.com/user-guide/3d-modeling/modeling-basics/creating-meshes/remeshing/

Remeshing is a way to create a new single mesh by combining several existing objects. These objects can be combined in different ways to give different results. ZBrush uses its Unified Skin technology (similar to voxels) to create the model. The purpose of these tools is to create a new base mesh rather than a high resolution mesh, based on the combination of different high resolution models.

#AskZBrush: “Is it possible to use ZRemesher to just .

https://www.youtube.com/watch?v=0TlG4Ex9lQA

Jan 20, 2017 · #AskZBrush: “Is it possible to use ZRemesher to just remesh part of a Subtool?”Video covers using ZRemesher to remesh only part of a model by Visibility.Ask . Author: Pixologic ZBrush

ZBrush Questions and Troubleshooting Forum — Page 104

http://archive.zbrushcentral.com/forumdisplay.php?101-ZBrush-Questions-and-Troubleshooting-Forum/page104&daysprune=-1

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Remeshing Error Encountered Fixes & Solutions

We are confident that the above descriptions of Remeshing Error Encountered and how to fix it will be useful to you. If you have another solution to Remeshing Error Encountered or some notes on the existing ways to solve it, then please drop us an email.

Источник

EXOSIDE

Troubleshooting installation issues :

• Unzipping issues

A frequent issue is to unzip the downloaded plugin archive in a way the folder hierarchy is lost. (Cinema4D, Maya, Houdini)
You NEED to maintain the folder hierarchy that exists in the zip archive while unzipping !

• Download + unzip issues on macOS for QR for Blender
  

The installation process of QR for Blender requires to download a zip file.
Safari may automatically unzip the zip just after having downloaded it. In this case, you would get a folder instead of a zip file, and the installation process will not work. You absolutly need to download a zip for Blender.

The solution is to disable the automatical unzipping in Safari:
Open Safari Preferences, and under the General tab, uncheck the option Open “safe” files after downloading.

• QuadRemesher for MODO installation issues

When you drag and drop the lpk, modo performs the installation of the plugin.
It may return an error message if
– It can’t find the target ‘Kit’ folder
– or, it has no right to write in the Kit folder.
In this case, the workaround is to install it manually:
– Rename the .lpk as .zip
– Extract the ‘QuadRemesher’ folder inside the zip
– Open modo, click on ‘Open Content Folder’
(or ‘Open User folder’, this location will work as well)
– In the Explorer/Finder, enter in the ‘Kit’ folder.
Copy the “QuadRemesher” folder extracted from the zip into the ‘Kit’ folder
Close and restart modo .

• QuadRemesher for MAYA installation issues

In the ‘quick start‘ video, we want to install in “C:UsersAll Users AutodeskApplicationPlugins”.
1 – NB: on windows, “C:UsersAll Users” is exactly the same folder than “C:ProgramData”.
So you can install in “C:ProgramDataAutodeskApplicationPlugins”, this will be strictly equivalent.
2 – On macOS : The “QuadRemesher” folder extracted from the zip must be copied in:
“/Users/Shared/Autodesk/ApplicationAddins/”
3 – The “C:UsersAll Users Autodesk” folder should already exist if Maya is installed. (/Users/Shared/Autodesk/ on macOS).
BUT, the folder “ApplicationPlugins” may not already exist ! (“ApplicationAddins” on macOS)
In this case, CREATE it manually! (take care of typo !)

• QuadRemesher for BLENDER installation issues

What you get after downloading the addon is a bridge between Blender and the Remeshing-Engine (the algorithm).
The zip doesn’t contain the Remeshing-Engine.
So the first time you click on “Remesh It” (or “License Manager”) button, the addon will automatically download and install the Remeshing-Engine.
It will install it in:
. Windows : C:ProgramDataExosideQuadRemesherDatas_BlenderQuadRemesherEngine_1.2
. macOS: /Users/Shared/Exoside/QuadRemesher/Datas_Blender/QuadRemesherEngine_1.2
. Linux:

If the addon doesn’t work as expected the 1st time, check if this folder has been created.
If, for some reasons, the addon can’t download the engine automatically, you will have to do it manually.
You can download it here :
https://www.exoside.com/quadremesherdata/quad_remesher_engine_1.2_win.zip
https://www.exoside.com/quadremesherdata/quad_remesher_engine_1.2_macOS.zip
https://www.exoside.com/quadremesherdata/quad_remesher_engine_1.2_linux.zip

http://www.exoside.com/quadremesherdata/quad_remesher_engine_1.0_win.zip
http://exoside.com/quadremesherdata/quad_remesher_engine_1.0_macOS.zip
And extract it in the appropriate folder (described few lines above).
ex: On Windows, the following path must be valid:
C:ProgramDataExosideQuadRemesherDatas_BlenderQuadRemesherEngine_1.2xremesh.exe

Troubleshooting running issues :

On Windows:

You can get this kind of error: “The program can’t start because MSVCR140.dll is missing…” (or MSVCR150)
In this case, you will need to download and install Microsoft’s Redistibuable Packages for Visual Studio 2017.
You can find it here : https://go.microsoft.com/fwlink/?LinkId=746572
(or google : “Download Microsoft Visual C++ 2017 Redistributable Package (x64)”)

You can get this kind of error: “The program can’t start because MSVCR120.dll is missing…”
In this case, you will need to download and install Microsoft’s Redistibuable Packages for Visual Studio 2013.
You can find it here : https://www.microsoft.com/en-us/download/details.aspx?id=40784
(or google : “Download Microsoft Visual C++ 2013 Redistributable Package (x64)”)

If you get: “The program can’t start because MSVCR100.dll is missing…”
In this case, you will need to download and install Microsoft’s Redistibuable Packages for Visual Studio 2008.
You can find it here: https://www.microsoft.com/en-US/download/details.aspx?id=15336
(or google : “Download Microsoft Visual C++ 2008 Redistributable Package (x64)”)

On macOS:
(no known issues)

On LINUX: known issues

QR for LINUX does not work with Houdini 18.5 python 3.7 (but works with Houdini 18.5 official download : python2.7 based). This will be fixed ASAP.

On some distribution the license Manager has some issues:
– After activation, you may not get the success message but the computer should be activated successfully.
– clicking on “Deactivate” (if you want to deactivate your linux), may not work on some distribution (CentOS)
The workaround is to delete manually the activation file : XRemesher…_V1.lac
located in $HOME/.local/share/Exoside/Licenses/
This will be fixed ASAP….

• Antivirus issues:

QuadRemesher plugins needs to launch an executable which performs the remeshing. (“xremesh.exe” on windows, “xremesh” on macOS)
Some antivirus may block the execution of ‘xremesh.exe’ (Norton, for example). In this case you will get no result after clicking on “Remesh it!”.
The solution is to add an exception for the ‘xremesh.exe’ in your antivirus.

• Graphic UI issues: (4K screens…)
  

QuadRemesher License Manager is compatible with 4K screens. But sometimes you can get corrupted UI (mainly when switching from 4K to 1K screens). In this case, the best to “reset” QuadRemesher (see below) and then, re-open the License Manager.

• How to fully RESET QuadRemesher installation

For some reasons, you may want to reset QuadRemesher (it was working before, but not anymore…)
You can do this by opening the Explorer/Finder in the following folders and remove every folders and files which are inside:
on windows:
C:Users[YOURNAME]AppDataLocalExosideQuadRemesher
C:Users[YOURNAME]AppDataLocalTempExosideQuadRemesher
C:ProgramDataExosideQuadRemesher
on macOSX:

/Library/Application Support/Exoside/QuadRemesher/
on Linux:

ZBrush — Fix the «ERROR: Zremeshing error encountered.» Can be fixed a couple of different ways.

Sean Forsyth

ZBrush — Fix the ERROR: Zremeshing error encountered. There are a couple of different ways to fix this, see them here. #zbrush #zbrushtutorial #zremeshererror #zremesher Click to subscribe: 🤍🤍youtube.com/c/seanforsythtutorials?sub_confirmation=1 — Join me on my social channels: 🤍sforsyth.artstation.com/ 🤍🤍instagram.com/seanforsyth/ 🤍🤍linkedin.com/in/seanforsyth/ 🤍gumroad.com/seanforsyth — This channel is dedicated to teaching ZBrush tips and tricks, and gives away free content such as brushes or models from time to time. Feel free to leave comments and suggestions for future tutorials — I’m always open to suggestions!

Not worked for me. I already mailed my working project, would you please check it out

Sir my zremesher change the subtool in different subtool

Thanks a ton ofr this video ! I was having the issue and the «weld identical points» thing did it for me 😀

Thank you so much uwu

Thank you. Very handy.

Thanks so much! I love a to the point video where the results actually happen for me, too.

Thanks man! You are my hero!!

Thank you, kind sir!

Thank you so much!

Jeez I have not been able to use zremesher 3.0 since he came out. can’t wait to try will it finally work 😀

hello sean forsyth im a learning beginner blender and zbrush. im having a trouble of zremeshing the mesh. the problem is that when i zremesh my cloth that has folds and hard edges they get deformed like more curvish delets all the edges and makes it very curvature like some has smoothed all the edges, and the size too cause of deformation the size gets very smaller than the original. what would be the problem?? my process was first dynamesh and subdivide to 3 then after i fisnished with dynamesh work, i did an zremesher for detailed works subdived till 4 after i finished it i tried to make low poly zremesher and thats where the problem happended got low poly but lost lots of part that made smaller and curvishy.

Источник

DOCUMENTATION

Boolean Resulting Topology Issues and Errors

When executing the Boolean operation through the Make Boolean Mesh command, you may see warning or information messages at the end of the process.
As explained in the “Important Notice About Boolean Operations” section of this chapter, the process is very sensitive to the topology of the input 3D models. Depending on these meshes, the resulting SubTool(s) can have topology errors. They can even be invisible, like small holes on hidden areas.
The most common message that you will see is:

Boolean operation succeeded but several warnings were reported during the process.
The resulting SubTool(s) may or may not contain a few inaccuracies.

The first step is to carefully check your model and see if everything looks fine. If yes and you are not going to be performing another Boolean operation on the output result, then you can leave it as it is. But if you are going to perform new Boolean operations based on the meshes that displayed this error, it is strongly advised to look for the cause of the problems, fix them and then generate a new result.
Most of the time, the errors are from input meshes with facing coplanar parts or meshes that are not watertight.

1.Checking for Coplanar Faces

Before executing the Boolean operation command, it is strongly advised to check for existing coplanar faces.
Click the Render >> Render Booleans >> Show Coplanar button. If your SubTools have coplanar faces between other SubTools or themselves, these coplanar faces will be highlighted in red.
You then need to select the SubTool which produced coplanar faces. To fix them, you will usually need to just slightly move and/or rotate your model or its topology until the red area disappears.

On the left, the model with the coplanar faces highlighted. On the right, one of the SubTool has been slightly moved to remove the coplanar faces.

You can quickly switch between SubTools which have coplanar faces by using the Next and Previous functions. These buttons will only cycle through the SubTools that are reporting the coplanar issues, skipping the rest of the SubTool list.

2.Checking for Errors

If ZBrush displays a message after using the Make Union Mesh function, you will be able to use the Render >> Render Booleans >> Show Issues function. This function can be enabled only if you select the Tool which contains the errors.
After discarding the error message, select the generated Tool in the Tool list. You can then enable this feature which will highlight all the parts of the model which have issues. They can be tiny holes or large parts.
By analyzing where the errors are located, you should be able to find these causes of these issues in the original model’s SubTools. Most of the time, the errors come from coplanar faces or completely degenerated topology.
If you see unprocessed SubTools in your processed Boolean model, it is because they generated an error that prevented the Boolean function from using them. Those problems need to be fixed as well.
You can use the Next and Previous commands to switch between the SubTools that show the errors.

Источник

Remeshing Error Encountered

We have collected for you the most relevant information on Remeshing Error Encountered, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Remeshing Error Encountered before you, so use the ready-made solutions.

Moldflow: Error Encountered problems while meshing a face .

https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/Error-Encountered-problems-while-meshing-a-face.html

Encountered problem when meshing face ###. Second attempt: Trying to recover from previous error(s). Retrying the mesh process using a fallback tessellation method. Mesh density defined on faces will not be used by this approach. The generated mesh does not have precise match at cad bodies interface as expected.

Error-Automatic remeshing — COMSOL Multiphysics

https://www.comsol.com/forum/thread/34371/error-automatic-remeshing

Mar 09, 2016 · I encountered a problem about «Automatic remeshing» with «deformed geomerty» and Time-Dependent Solver When I ran the program, Comsol always displayed a Error: Unsupported operation on this type of object. -Feature: Time-Dependent Solver 1 (sol1/t1); -Error: Unsupported operation on this type of object.

Zbrush: ZRemesher won’t work — polycount

https://polycount.com/discussion/149156/zbrush-zremesher-wont-work

Okay I have some new problems now. For some reason I have no idea why I’m having difficulty with z-remesh again. I figured this out back when I was working with my red riding hood model, but for some strange reason when I z-remesh the entire model, the program does not …

Remeshing_ ANSYS 14.0_ System Coupling — CFD Online .

https://www.cfd-online.com/Forums/ansys/100496-remeshing_-ansys-14-0_-system-coupling.html

Nov 02, 2016 · But my problem is that the dynamic mesh (Remeshing), it doesn’t work. So the System Coupling gives error, because the mesh of the Fluid. The message de error: “Update failed for the Solution component in System Coupling. System coupling run completed with errors. Additional information: One or more elements have become highly distorted.

Remesh if optimisation runs into element quality error .

https://insider.altairhyperworks.com/remesh-optimisation-runs-element-quality-error/

Mar 18, 2014 · By activating the REMESH option in opti control, remeshing will be activated to improve element quality if there is an element quality error is encountered. After the remesh, the optimisation will then continue based on the remeshed model. Download the Entire Tip>>

[ANSYS Meshing] Meshing error encountered — CFD Online .

https://www.cfd-online.com/Forums/ansys-meshing/199128-meshing-error-encountered.html

Feb 28, 2018 · 2.5e-03mm with a 20% growth rate and for 20 layers. The software does the meshing but says » Invalid geo element encountered meshing aborted» but it displays a mesh. When I simulate it in fluent after about 80 -100 iterations it is diverging. I am not able to make out if the problem is with the mesh or with the geometry. Please help.

Remeshing ZBrush Docs

http://docs.pixologic.com/user-guide/3d-modeling/modeling-basics/creating-meshes/remeshing/

Remeshing is a way to create a new single mesh by combining several existing objects. These objects can be combined in different ways to give different results. ZBrush uses its Unified Skin technology (similar to voxels) to create the model. The purpose of these tools is to create a new base mesh rather than a high resolution mesh, based on the combination of different high resolution models.

#AskZBrush: “Is it possible to use ZRemesher to just .

https://www.youtube.com/watch?v=0TlG4Ex9lQA

Jan 20, 2017 · #AskZBrush: “Is it possible to use ZRemesher to just remesh part of a Subtool?”Video covers using ZRemesher to remesh only part of a model by Visibility.Ask . Author: Pixologic ZBrush

ZBrush Questions and Troubleshooting Forum — Page 104

http://archive.zbrushcentral.com/forumdisplay.php?101-ZBrush-Questions-and-Troubleshooting-Forum/page104&daysprune=-1

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Remeshing Error Encountered Fixes & Solutions

We are confident that the above descriptions of Remeshing Error Encountered and how to fix it will be useful to you. If you have another solution to Remeshing Error Encountered or some notes on the existing ways to solve it, then please drop us an email.

Источник

EXOSIDE

Troubleshooting installation issues :

• Unzipping issues

A frequent issue is to unzip the downloaded plugin archive in a way the folder hierarchy is lost. (Cinema4D, Maya, Houdini)
You NEED to maintain the folder hierarchy that exists in the zip archive while unzipping !

• Download + unzip issues on macOS for QR for Blender
  

The installation process of QR for Blender requires to download a zip file.
Safari may automatically unzip the zip just after having downloaded it. In this case, you would get a folder instead of a zip file, and the installation process will not work. You absolutly need to download a zip for Blender.

The solution is to disable the automatical unzipping in Safari:
Open Safari Preferences, and under the General tab, uncheck the option Open “safe” files after downloading.

• QuadRemesher for MODO installation issues

When you drag and drop the lpk, modo performs the installation of the plugin.
It may return an error message if
– It can’t find the target ‘Kit’ folder
– or, it has no right to write in the Kit folder.
In this case, the workaround is to install it manually:
– Rename the .lpk as .zip
– Extract the ‘QuadRemesher’ folder inside the zip
– Open modo, click on ‘Open Content Folder’
(or ‘Open User folder’, this location will work as well)
– In the Explorer/Finder, enter in the ‘Kit’ folder.
Copy the “QuadRemesher” folder extracted from the zip into the ‘Kit’ folder
Close and restart modo .

• QuadRemesher for MAYA installation issues

In the ‘quick start‘ video, we want to install in “C:UsersAll Users AutodeskApplicationPlugins”.
1 – NB: on windows, “C:UsersAll Users” is exactly the same folder than “C:ProgramData”.
So you can install in “C:ProgramDataAutodeskApplicationPlugins”, this will be strictly equivalent.
2 – On macOS : The “QuadRemesher” folder extracted from the zip must be copied in:
“/Users/Shared/Autodesk/ApplicationAddins/”
3 – The “C:UsersAll Users Autodesk” folder should already exist if Maya is installed. (/Users/Shared/Autodesk/ on macOS).
BUT, the folder “ApplicationPlugins” may not already exist ! (“ApplicationAddins” on macOS)
In this case, CREATE it manually! (take care of typo !)

• QuadRemesher for BLENDER installation issues

What you get after downloading the addon is a bridge between Blender and the Remeshing-Engine (the algorithm).
The zip doesn’t contain the Remeshing-Engine.
So the first time you click on “Remesh It” (or “License Manager”) button, the addon will automatically download and install the Remeshing-Engine.
It will install it in:
. Windows : C:ProgramDataExosideQuadRemesherDatas_BlenderQuadRemesherEngine_1.2
. macOS: /Users/Shared/Exoside/QuadRemesher/Datas_Blender/QuadRemesherEngine_1.2
. Linux:

If the addon doesn’t work as expected the 1st time, check if this folder has been created.
If, for some reasons, the addon can’t download the engine automatically, you will have to do it manually.
You can download it here :
https://www.exoside.com/quadremesherdata/quad_remesher_engine_1.2_win.zip
https://www.exoside.com/quadremesherdata/quad_remesher_engine_1.2_macOS.zip
https://www.exoside.com/quadremesherdata/quad_remesher_engine_1.2_linux.zip

http://www.exoside.com/quadremesherdata/quad_remesher_engine_1.0_win.zip
http://exoside.com/quadremesherdata/quad_remesher_engine_1.0_macOS.zip
And extract it in the appropriate folder (described few lines above).
ex: On Windows, the following path must be valid:
C:ProgramDataExosideQuadRemesherDatas_BlenderQuadRemesherEngine_1.2xremesh.exe

Troubleshooting running issues :

On Windows:

You can get this kind of error: “The program can’t start because MSVCR140.dll is missing…” (or MSVCR150)
In this case, you will need to download and install Microsoft’s Redistibuable Packages for Visual Studio 2017.
You can find it here : https://go.microsoft.com/fwlink/?LinkId=746572
(or google : “Download Microsoft Visual C++ 2017 Redistributable Package (x64)”)

You can get this kind of error: “The program can’t start because MSVCR120.dll is missing…”
In this case, you will need to download and install Microsoft’s Redistibuable Packages for Visual Studio 2013.
You can find it here : https://www.microsoft.com/en-us/download/details.aspx?id=40784
(or google : “Download Microsoft Visual C++ 2013 Redistributable Package (x64)”)

If you get: “The program can’t start because MSVCR100.dll is missing…”
In this case, you will need to download and install Microsoft’s Redistibuable Packages for Visual Studio 2008.
You can find it here: https://www.microsoft.com/en-US/download/details.aspx?id=15336
(or google : “Download Microsoft Visual C++ 2008 Redistributable Package (x64)”)

On macOS:
(no known issues)

On LINUX: known issues

QR for LINUX does not work with Houdini 18.5 python 3.7 (but works with Houdini 18.5 official download : python2.7 based). This will be fixed ASAP.

On some distribution the license Manager has some issues:
– After activation, you may not get the success message but the computer should be activated successfully.
– clicking on “Deactivate” (if you want to deactivate your linux), may not work on some distribution (CentOS)
The workaround is to delete manually the activation file : XRemesher…_V1.lac
located in $HOME/.local/share/Exoside/Licenses/
This will be fixed ASAP….

• Antivirus issues:

QuadRemesher plugins needs to launch an executable which performs the remeshing. (“xremesh.exe” on windows, “xremesh” on macOS)
Some antivirus may block the execution of ‘xremesh.exe’ (Norton, for example). In this case you will get no result after clicking on “Remesh it!”.
The solution is to add an exception for the ‘xremesh.exe’ in your antivirus.

• Graphic UI issues: (4K screens…)
  

QuadRemesher License Manager is compatible with 4K screens. But sometimes you can get corrupted UI (mainly when switching from 4K to 1K screens). In this case, the best to “reset” QuadRemesher (see below) and then, re-open the License Manager.

• How to fully RESET QuadRemesher installation

For some reasons, you may want to reset QuadRemesher (it was working before, but not anymore…)
You can do this by opening the Explorer/Finder in the following folders and remove every folders and files which are inside:
on windows:
C:Users[YOURNAME]AppDataLocalExosideQuadRemesher
C:Users[YOURNAME]AppDataLocalTempExosideQuadRemesher
C:ProgramDataExosideQuadRemesher
on macOSX:

/Library/Application Support/Exoside/QuadRemesher/
on Linux:

More about «zbrush remeshing error encountered food»

Страницы: [1]   Вниз

0 Пользователей и 1 Гость просматривают эту тему.

Страницы: [1]   Вверх