6-13 ERROR MESSAGE
NO
CHECKING
Restart the machine
1
Refer to [6-14 SERVICE
CALL]
Restart the machine
2
Internal Error
Upgrade the firmware to
the latest version
6-14 SERVICE CALL
CONTENTS
CODE
Disorder of communication with Sub CPU
This occurs when the Sub CPU is not
0002
detected after turning on the machine
0004
Sub CPU SRAM error
An error occurs while downloading a
program for sub CPU.
0005
An error occurs when trying to connect with
sub CPU.
0006
An error occurs while sending a command.
0007
There is a problem with synchronizing serial
communication to Sub CPU.
0008
Network I/F Initialize has not been
0010
completed.
Limit Position Initialize in the Service Mode
has not been done.
0101
Even though the machine carries out the
0102
regular movement, the output of Head Lock
Sensor does not reach the expected value.
Even though the machine carries out the
0103
regular movement, the output of Limit Sensor
does not reach the expected value.
Tool Carriage Connection Error
0105
Machine fails to disconnect the Tool
Carriage from the Head Carriage.
0106
Linear Encoder Setup has not been done.
0107
ACTION
[6-14 SERVICE CALL]
Servo Board does not work correctly.
Sub CPU does not work correctly.
There is a bad connection between Main
Board and Servo Board.
SRAM is broken.
Servo Board does not work correctly.
Sub CPU does not work correctly.
There is a bad connection between Main
Board and Servo Board.
A noise on a signal.
A noise on a signal while sending a
command.
Sub CPU was reset to default.
Tried to communicate when Sub CPU was
reset to default.
Servo Board does not work correctly.
Sub CPU does not work correctly.
There is a bad connection between Main
Board and Servo Board.
A noise on a signal while sending a
command.
Sub CPU was reset while sending a
command.
Servo Board does not work correctly.
Sub CPU does not work correctly.
There is a bad connection between Main
Board and Servo Board.
A noise on a signal.
Network I/F does not work correctly.
Firmware for Network I/F is not installed.
Limit Position Initialize has not been done.
Limit Position Initialize is ended before it is
completed.
Head Lock Sensor does not work correctly or
is broken.
Limit Sensor does not work correctly or is
broken.
Fault of Tool Carriage Connection
Loose of Connection Part
Fault of the Limit Position Initialize value
Limit Sensor does not work correctly or is
broken.
Fault of Tool Carriage Connection
Loose of Connection Part
Fault of the Limit Position Initialize value
Limit Sensor does not work correctly or is
broken.
Linear Encoder Setup has not been done.
Linear Encoder Setup is ended before it is
completed.
REFERENCE
Restart the machine and see if the same error occurs again.
Restart the machine and see if the same error occurs again.
Check the revision record of the firmware version and
upgrade it if the error has been solved in the firmware.
CAUSE
Check cable connection between Main Board and Servo
Board.
Check the other cable connections of Servo Board.
Servo Board replacement
Main Board replacement
Flexible cable replacement
Servo Board replacement
Check cable connection between Main Board and Servo
Board.
Check the other cable connections of Servo Board.
Servo Board replacement
Main Board replacement
Flexible cable replacement
Check cable connection between Main Board and Servo
Board.
Check the other cable connections of Servo Board.
Servo Board replacement
Main Board replacement
Flexible cable replacement
Check cable connection between Main Board and Servo
Board.
Check the other cable connections of Servo Board.
Servo Board replacement
Main Board replacement
Flexible cable replacement
Check cable connection between Main Board and Servo
Board.
Check the other cable connections of Servo Board.
Servo Board replacement
Main Board replacement
Flexible cable replacement
Check the firmware is installed into Network I/F.
Main Board replacement
Complete Limit Position Initialize correctly.
Head Lock Sensor replacement
Check the mechanical backlash or loose with the scan axis
related parts.
Limit Sensor replacement
Check the mechanical backlash or loose with the scan axis
related parts.
Check the mechanical Backlash or loose with the Tool
Carriage part.
Connection Part Replacement
Limit Position Initialize
Check the mechanical Backlash or loose with the Tool
Carriage part.
Connection Part Replacement
Limit Position Initialize
Carry out Linear Encoder Setup in service menu.
6-10
OUTLINE
ACTION
-
#1
Hi, I have a VP-540i that is giving me problems. I am getting an error 0109 error. I have the service manual and tried replacing the wiper motor and sensor. The motor does not even try to rotate. If i go to service mode i can see the sensor works if I push the wiper to and away from home position.
My next guess would be the servo board. does anyone have any suggestions for me? is there a way to try to start or move the motor in service mode manually? is there a chance that the servo board could be bad or blown a fuse?
Your help will be appreciated. Thank you
Last edited: May 19, 2017
-
#5
Hey cwaldner,
Considering the wiper sensor is working, the motor does not rotate, and the cable connection to the servo board seem to check out, what remains is a failed wiper motor (albeit new) and/or failed servo board. Beyond this consideration, it’s recommended to consult with your regional Roland dealer for parts and repair.
If you have additional questions or need extra support directly from Roland corporate support, please submit an «official» support request form online here: Product Support Form | Roland
If you do write us, we look forward to helping you and take care,
Roland Technical Support
Roland DGA Corp.
rn
Roland Service Call 0109 Solution
01:25
1.86 MB
1.8K
Roland RE640 How To Solve Service Call 0109
01:05
1.43 MB
679
Error Code 0109 Fix
05:43
7.52 MB
13.5K
Roland Service Call 0109 Error
02:26
3.20 MB
12.5K
Academia Dimatur Roland VersaCAMM VS Series Wiper Erro 0109
56
1.23 MB
0.9K
SERVICE CALL 0109
47
1.03 MB
1.8K
VS 640 SERVICE CALL 0109
19
426.76 KB
5.7K
Solucion A Error 0109 Rolando RS 640
01:19
1.73 MB
1.3K
Roland VersaCamm VS Series Clearing The 0109 Error All Graphic Supplies
01:03
1.38 MB
74.6K
How To Get Into Service Mode On Roland Printers
18
404.30 KB
19.9K
Roland VP 540 Error Service Call 0112
03:18
4.34 MB
11K
Impressora Roland Erro De Motor Scan Motor Do Carro De Impressão
02:23
3.14 MB
12.5K
Gestione Errore 0109
58
1.27 MB
1.3K
Rodney Carrington 0109 Dream Lover
21:36
28.43 MB
572.2K
Service Mode Roland Vp540
13
291.99 KB
11.9K
Al Rajhi Bank Alert Account Close In 30 Days Al Rajhi Bank
05:29
7.22 MB
47.5K
Windows Installation Encountered Error 0x800b0109 Fix
02:35
3.40 MB
2.8K
Roland XR 640 Service Call 0105
27
606.45 KB
5K
Error Call 0110 Roland PrinTing Machine
03:52
5.09 MB
12.4K
VS640i Service Call 0106
43
965.82 KB
2.2K
What To Do When You Have An Error Code Roland
36
808.59 KB
5.8K
Service Call 0110 Plotter Roland Sp540i
44
988.28 KB
4.1K
Volvo Anti Skid Repair Tutorial
08:36
11.32 MB
327.1K
Error Roland Rs 640
34
763.67 KB
8.8K
Vp540 Motor Error Code 0010
09:24
12.37 MB
10.2K
ПОСУДОМОЕЧНАЯ МАШИНА BOSCH КАК ПОЛЬЗОВАТЬСЯ ПЕРВЫЙ ЗАПУСК ОБЗОР и ЗАГРУЗКА ПОСУДЫ
11:56
15.71 MB
76.1K
Roland Limit Initialize Procedure
01:53
2.48 MB
10.5K
Error 109 Roland BN 20
03:29
4.58 MB
2.5K
Service Call Error
42
943.36 KB
2.7K
Auction Buy From The DEAD Aisle Will It RUN Cummins Powered Service Van
44:08
58.08 MB
769K
ROLAND SERVICE CODE 0110
59
1.29 MB
7.5K
LabMinutes SEC0109 Cisco ISE 1 2 Distributed Deployment With Wildcard Certificate
13:35
17.88 MB
9.9K
Error Code 0x800b0109 Some Update Files Aren T Signed Correctly
02:42
3.55 MB
3K
Roland Versa Camm Sp 540i Motor Scan E Erro 0110
13:13
17.39 MB
3.2K
Entering Into Service Mode In Roland Printers We Provide Service And Repair From S California
21
471.68 KB
2.7K
Error Windows Update 0x800b0109 En Windows 10 Tutorial 2023
08:04
10.62 MB
1.7K
HYUNDAI SONATA CODE P0105 P0106 P0107 P0108 P0109 ENGINE LIGHT ON FIX
03:09
4.15 MB
8.8K
ERROR C 0211 BIZHUB KONICA MINOLTA 283 423 363
04:20
5.70 MB
16.2K
Q A With GSD 109 Eng Hin Punj
19:36
25.79 MB
291.2K
Элитная недвижимость гадкой парочки пропагандистов
17:59
23.67 MB
7.8M
ROLAND VP 540 WRONG HEAD INSTALLED
04:13
5.55 MB
4.9K
Can Men And Women Be Friends W MichaelSartain RebeccaBarrett SOSCAST EP 74
02:01:08
159.42 MB
35.6K
Kal Tire Mobile Commercial Services
44
988.28 KB
288
For More Information On Used 2019 Jeep Grand Cherokee Limited X For Sale In The Nashville TN
01:03
1.38 MB
7
Third Party Updates Fail To Install With Error 0x800b0109 In SCCM
11:34
15.22 MB
28.8K
Trolling As Daisy09 With Mods I Got Banned Gorilla Tag
06:39
8.75 MB
2.3M
This Is What We Found During An Initial Pest Control Inspection In North Miami Beach Fl
03:50
5.04 MB
213
Configuring A CIsco ISE Distributed Deployment
01:17:00
101.34 MB
3.9K
Windows Service Which Interacts With An Application
08:42
11.45 MB
1.3K
South Stadium In Qatar Modeling In 3ds Max ستاد الجنوب علي ثري دي ماكس
11:00
14.48 MB
1.7K