Runtime error 3075 access - Исправление ошибок и поиск оптимальных решений проблем

Remove From My Forums

Question
I cannot get this code to work although I am using a similar one in a different form.

I want to take the info placed in the form called form_Tblstart and place it into tblvýsledky.

Private Sub Command16_Click()
Dim S As String

S = «INSERT INTO tblVýsledky(Otazka, Odpoved1, Odpoved2, Odpoved3, Odpoved4, VaseOdpoved) values (» & Me.txt1 & «‘,'» & Me.txt2 & «‘,'» & Me.txt3 & «‘,'» & Me.txt4 & «‘,'»
& Me.txt5 & «‘,'» & Me.txt6 & «‘)»
CurrentDb.Execute S

‘refresh
Form_TblStart.Form.Requery

End Sub
- Edited by
  
  Tuesday, August 18, 2015 12:02 PM

Answers

You can post your DB on OneDrive and supply the link here for us to look at it.

Before you do that, try the following and see what happens:

Private Function BuildSQL(Val1 As String, Val2 As String, Val3 As String, Val4 As String, Val5 As String, Val6 As String) As String

    Dim strReturn As String
    
    strReturn = "INSERT INTO tblVýsledky (Otazka, Odpoved1, Odpoved2, Odpoved3, Odpoved4, VaseOdpoved) " & _
    "VALUES ('" & Val1 & "','" & Val2 & "','" & Val3 & "','" & Val4 & "','" & Val5 & "','" & Val6 & "')"
    
    BuildSQL = strReturn
    
End Function

Private Sub Command16_Click()
    
    Dim strSQL As String
    
    strSQL = BuildSQL(Me.txt1, Me.txt2, Me.txt3, Me.txt4, Me.txt5, Me.txt6)
    
    Debug.Print strSQL
    
    'CurrentDb.Execute strSQL
    
    'Form_TblStart.Form.Requery

End Sub

Marked as answer by
Rostislav S
Monday, August 24, 2015 7:23 AM

Источник

Remove From My Forums

Question
A simple query, the WHERE clause is giving a 3075 error on even a simple entry.

Field: TestName

Table: Parameters

Total: Where

Criteria: 10

Try to save or view the SQL and it returns: Syntax error in query expression ‘(((Parameters.[TestName])=»10″))’.

Click Help, it says: <Message> in query expression <expression>. (Error 3075)

The expression you typed is not valid for the reason indicated in the message. Make sure you have typed field names and punctuation correctly, and then try the operation again.

The error is spreading to another query that I was looking at for comparison. The other query pulls a parameter from a form. The query runs fine when another query calls it, but I can’t open in it design view anymore. Do I have a virus
or something causing this problem?

Answers

The problem was that I had a table named Parameters and a form named Parameters and it was confusing the query. I changed the names to tblparameters and frmparameters and all the places these objects were called and no more error.

Why that didn’t matter before and why my table and form that are both named Samples didn’t produce the same error? I don’t know. But from now on I will use those prefixes and no spaces in names, etc, to avoid any sensitivities that Access has
about it.

Thank you Jaynet Zhang for your suggestions.
- Marked as answer by
  
  Wednesday, June 6, 2012 2:46 PM

Источник

How to fix the Runtime Code 3075 Microsoft Access Error 3075

This article features error number Code 3075, commonly known as Microsoft Access Error 3075 described as |1 in query expression ‘|2’.

About Runtime Code 3075

Runtime Code 3075 happens when Microsoft Access fails or crashes whilst it’s running, hence its name. It doesn’t necessarily mean that the code was corrupt in some way, but just that it did not work during its run-time. This kind of error will appear as an annoying notification on your screen unless handled and corrected. Here are symptoms, causes and ways to troubleshoot the problem.

Definitions (Beta)

Here we list some definitions for the words contained in your error, in an attempt to help you understand your problem. This is a work in progress, so sometimes we might define the word incorrectly, so feel free to skip this section!

Access — DO NOT USE this tag for Microsoft Access, use [ms-access] instead
Expression — Combination of several programming symbols and values intending to produce a result
Access — Microsoft Access, also known as Microsoft Office Access, is a database management system from Microsoft that commonly combines the relational Microsoft JetACE Database Engine with a graphical user interface and software-development tools
Microsoft access — Microsoft Access, also known as Microsoft Office Access, is a database management system from Microsoft that commonly combines the relational Microsoft JetACE Database Engine with a graphical user interface and software-development tools

Symptoms of Code 3075 — Microsoft Access Error 3075

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of Microsoft Access Error 3075 — Code 3075

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it’s writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page — you complete these steps at your own risk.

Method 1 — Close Conflicting Programs

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
You will need to observe if the error message will reoccur each time you stop a process.
Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 — Update / Reinstall Conflicting Programs

Using Control Panel

For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
Once inside Programs and Features, click the problem program and click Update or Uninstall.
If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application’s installation disk to reinstall the program.

Using Other Methods

For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
For Windows 10, you may click Start, then Settings, then choose Apps.
Scroll down to see the list of Apps and features installed in your computer.
Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 — Update your Virus protection program or download and install the latest Windows Update

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 — Re-install Runtime Libraries

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
Click Uninstall on top of the list, and when it is done, reboot your computer.
Download the latest redistributable package from Microsoft then install it.

Method 5 — Run Disk Cleanup

You might also be experiencing runtime error because of a very low free space on your computer.

You should consider backing up your files and freeing up space on your hard drive
You can also clear your cache and reboot your computer
You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
Click Properties and then click Disk Cleanup

Method 6 — Reinstall Your Graphics Driver

If the error is related to a bad graphics driver, then you may do the following:

Open your Device Manager, locate the graphics driver
Right click the video card driver then click uninstall, then restart your computer

Method 7 — IE related Runtime Error

If the error you are getting is related to the Internet Explorer, you may do the following:

Reset your browser.

For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.

Disable script debugging and error notifications.

On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
Put a check mark on the radio button
At the same time, uncheck the «Display a Notification about every Script Error» item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they’ve contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us:

Last Updated:

19/01/22 11:18 : A Windows 10 user voted that repair method 2 worked for them.

Recommended Repair Tool:

This repair tool can fix common computer problems such as blue screens, crashes and freezes, missing DLL files, as well as repair malware/virus damage and more by replacing damaged and missing system files.

STEP 1:

Click Here to Download and install the Windows repair tool.

STEP 2:

Click on Start Scan and let it analyze your device.

STEP 3:

Click on Repair All to fix all of the issues it detected.

DOWNLOAD NOW

Compatibility

Requirements

1 Ghz CPU, 512 MB RAM, 40 GB HDD
This download offers unlimited scans of your Windows PC for free. Full system repairs start at $19.95.

Article ID: ACX06455EN

Applies To: Windows 10, Windows 8.1, Windows 7, Windows Vista, Windows XP, Windows 2000

Speed Up Tip #10

Cleaning Up Your Registry:

Speed up your computer by removing broken shortcuts, invalid paths, invalid installer references, missing shared DLLs and more in your system Registry. However, most registry cleaners are not as effective as you would think they could be. So, better do some research and choose the one that works best. Also, make sure to always create a backup by making a new system restore point.

Click Here for another way to speed up your Windows PC

Microsoft & Windows® logos are registered trademarks of Microsoft. Disclaimer: ErrorVault.com is not affiliated with Microsoft, nor does it claim such affiliation. This page may contain definitions from https://stackoverflow.com/tags under the CC-BY-SA license. The information on this page is provided for informational purposes only. © Copyright 2018

Источник

	Номер ошибки:	Ошибка 3075
Название ошибки:	Microsoft Access Error 3075
Описание ошибки:	\|1 in query expression ‘\|2’.
Разработчик:	Microsoft Corporation
Программное обеспечение:	Microsoft Access
Относится к:	Windows XP, Vista, 7, 8, 10, 11

Анализ «Microsoft Access Error 3075»

Эксперты обычно называют «Microsoft Access Error 3075» «ошибкой времени выполнения». Разработчики, такие как Microsoft Corporation, обычно проходят через несколько контрольных точек перед запуском программного обеспечения, такого как Microsoft Access. Тем не менее, возможно, что иногда ошибки, такие как ошибка 3075, не устранены, даже на этом этапе.

Некоторые люди могут столкнуться с сообщением «|1 in query expression ‘|2’.» во время работы программного обеспечения. В случае обнаруженной ошибки 3075 клиенты могут сообщить о наличии проблемы Microsoft Corporation по электронной почте или сообщать об ошибках. Затем Microsoft Corporation исправит ошибки и подготовит файл обновления для загрузки. Таким образом, когда ваш компьютер выполняет обновления, как это, это, как правило, чтобы исправить проблемы ошибки 3075 и другие ошибки внутри Microsoft Access.

Что на самом деле вызывает ошибку времени выполнения 3075?

Проблема с исходным кодом Microsoft Access приведет к этому «Microsoft Access Error 3075», чаще всего на этапе запуска. Мы можем определить происхождение ошибок ошибки 3075 во время выполнения следующим образом:

Ошибка 3075 Crash — это распространенная ошибка 3075 во время выполнения ошибки, которая приводит к полному завершению работы программы. Это возникает, когда Microsoft Access не реагирует на ввод должным образом или не знает, какой вывод требуется взамен.

Утечка памяти «Microsoft Access Error 3075» — ошибка 3075 утечка памяти приводит к увеличению размера Microsoft Access и используемой мощности, что приводит к низкой эффективности систем. Возможные причины из-за отказа Microsoft Corporation девыделения памяти в программе или когда плохой код выполняет «бесконечный цикл».

Ошибка 3075 Logic Error — «логическая ошибка», как говорят, генерируется, когда программное обеспечение получает правильный ввод, но генерирует неверный вывод. Это видно, когда исходный код Microsoft Corporation включает дефект в анализе входных данных.

Основные причины Microsoft Corporation ошибок, связанных с файлом Microsoft Access Error 3075, включают отсутствие или повреждение файла, или, в некоторых случаях, заражение связанного Microsoft Access вредоносным ПО в прошлом или настоящем. Возникновение подобных проблем является раздражающим фактором, однако их легко устранить, заменив файл Microsoft Corporation, из-за которого возникает проблема. В качестве последней меры мы рекомендуем использовать очиститель реестра для исправления всех недопустимых Microsoft Access Error 3075, расширений файлов Microsoft Corporation и других ссылок на пути к файлам, по причине которых может возникать сообщение об ошибке.

Распространенные проблемы Microsoft Access Error 3075

Типичные ошибки Microsoft Access Error 3075, возникающие в Microsoft Access для Windows:

«Ошибка приложения Microsoft Access Error 3075.»

«Microsoft Access Error 3075 не является приложением Win32.»

«Возникла ошибка в приложении Microsoft Access Error 3075. Приложение будет закрыто. Приносим извинения за неудобства.»

«Не удается найти Microsoft Access Error 3075»

«Отсутствует файл Microsoft Access Error 3075.»

«Ошибка запуска в приложении: Microsoft Access Error 3075. «

«Не удается запустить Microsoft Access Error 3075. «

«Ошибка Microsoft Access Error 3075. «

«Ошибка в пути к программному обеспечению: Microsoft Access Error 3075. «

Обычно ошибки Microsoft Access Error 3075 с Microsoft Access возникают во время запуска или завершения работы, в то время как программы, связанные с Microsoft Access Error 3075, выполняются, или редко во время последовательности обновления ОС. Выделение при возникновении ошибок Microsoft Access Error 3075 имеет первостепенное значение для поиска причины проблем Microsoft Access и сообщения о них вMicrosoft Corporation за помощью.

Истоки проблем Microsoft Access Error 3075

Большинство проблем Microsoft Access Error 3075 связаны с отсутствующим или поврежденным Microsoft Access Error 3075, вирусной инфекцией или недействительными записями реестра Windows, связанными с Microsoft Access.

В частности, проблемы Microsoft Access Error 3075 возникают через:

Поврежденная или недопустимая запись реестра Microsoft Access Error 3075.

Вирус или вредоносное ПО, которые повредили файл Microsoft Access Error 3075 или связанные с Microsoft Access программные файлы.

Вредоносное удаление (или ошибка) Microsoft Access Error 3075 другим приложением (не Microsoft Access).

Другое программное приложение, конфликтующее с Microsoft Access Error 3075.

Неполный или поврежденный Microsoft Access (Microsoft Access Error 3075) из загрузки или установки.

Продукт Solvusoft

Загрузка
WinThruster 2022 — Проверьте свой компьютер на наличие ошибок.

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Установить необязательные продукты — WinThruster (Solvusoft) | Лицензия | Политика защиты личных сведений | Условия | Удаление

Источник

mserg1972

1 / 1 / 2

Регистрация: 18.12.2013

Сообщений: 239

30.01.2014, 09:19. Показов 6087. Ответов 13

Метки нет (Все метки)

Ошибка в передаче данных в запрос? или в синтаксисе?

Visual Basic

Private Sub кнопОценитьМагазины_Click()
  Dim sq As String
  Dim cfo As String
  cfo = "М12 Новосибирск Мега (ср)"
  sq = "SELECT Count(*) As kolinv,  -Sum(r = 'САМ') As kolsam" & _
       " FROM (SELECT TOP 3 [Оценка розница] As b, [Присутствие ревизора] As r " & _
       " FROM тблИнвентаризацииОценки" & _
       " WHERE ЦФО = cfo" & _
       " AND Order By ID Desc)"
    With CurrentDb.OpenRecordset(sq)
         MsgBox (!kolinv)
         MsgBox (!kolsam)
    End With
End Sub

Миниатюры

__________________
Помощь в написании контрольных, курсовых и дипломных работ, диссертаций здесь

16799 / 6965 / 1551

Регистрация: 21.06.2012

Сообщений: 12,998

30.01.2014, 09:26

Сообщение от mserg1972

AND здесь зачем, наверное при копировании осталось …?

mobile

26772 / 14451 / 3192

Регистрация: 28.04.2012

Сообщений: 15,782

30.01.2014, 10:14

Сообщение было отмечено mserg1972 как решение

Решение

Плюс к сказанному ltv_1953, обращение к переменной cfo надо выносить из под кавычек

Visual Basic

1 2	" WHERE ЦФО = '" & cfo & "'" & _ " Order By ID Desc)"

1 / 1 / 2

Регистрация: 18.12.2013

Сообщений: 239

30.01.2014, 10:43

[ТС]

Если я правильно понял, то при обращении к переменной правильно писать ‘» & cfo & «‘
Спасибо.
AND просмотрел, остался от более сложного запроса.

26772 / 14451 / 3192

Регистрация: 28.04.2012

Сообщений: 15,782

30.01.2014, 11:23

Сообщение было отмечено mserg1972 как решение

Решение

Сообщение от mserg1972

Если я правильно понял, то при обращении к переменной правильно писать ‘» & cfo & «‘

Запрос не понимает переменных и ему надо предложить значение переменной. А не ее идентификатор.

Апострофы нужны, если переменная текстового типа. Если числовая, то не нужны. Если датная, то в американском формате даты Format(cfo, «#mm/dd/yyyy#»)

mserg1972

1 / 1 / 2

Регистрация: 18.12.2013

Сообщений: 239

31.01.2014, 09:05

[ТС]

Visual Basic

1	Format(cfo, "#mm/dd/yyyy#")

в чем разница с другим вариантом, он тоже работает

Visual Basic

1	#Format(cfo, "mm/dd/yyyy")#

mobile

26772 / 14451 / 3192

Регистрация: 28.04.2012

Сообщений: 15,782

31.01.2014, 10:04

Сообщение от mserg1972

в чем разница с другим вариантом, он тоже работает Код Visual Basic1

Visual Basic

1	#Format(cfo, "mm/dd/yyyy")#

Именно в таком варианте, без символов конкатенации, точно не пройдет. Будет ошибка синтаксиса. Вы, видимо, говорите о варианте типа

Visual Basic

1	" WHERE [ПолеДаты] = #" & датнаяпеременная & "#"

Такая запись равнозначна той, которую я привел выше. Символы «#» соединяются с выражением формата с помощью символов конкатенации «&». Но мне лично кажется удобным не разбивать единое выражение на блоки, а записывать их слитно.

0 / 0 / 0

Регистрация: 24.10.2015

Сообщений: 16

24.10.2015, 21:14

Здравствуйте! У меня вот тоже синтаксическая ошибка:

s = «Select студенты.[фамилия],avg(экзамен.оценка) as среднее, count(экзамен.[код дисциплины])»
s = s & » From студенты, экзамен, дисциплины»
s = s & » Where студенты.[номерзачкнижки] = экзамен.[номерзачкнижки] and экзамен.[код дисциплины] = дисциплины.[код дисциплины]»
s = s & » Group by студенты.[фамилия]»
s = s & » Having count(экзамен.[код дисциплины])=(Select count(дисциплины.[код дисциплины]) From дисциплины and avg(экзамен.оценка)>=4 From экзамен)»

НУЖНО: отобрать всех студентов, сдавших экзамены по всем дисциплинам не менее 4. Что не так?

8521 / 5303 / 564

Регистрация: 27.03.2013

Сообщений: 18,552

24.10.2015, 21:22

Сообщение от ltv_1953

AND здесь зачем,

Сообщение от mobile

А не ее идентификатор.

А Вы ваще точно на Русском языке помогаете ТСу, я вот лично и половины из сказанного не понял.

shanemac51

Модератор

11267 / 4597 / 740

Регистрация: 07.08.2010

Сообщений: 13,182

Записей в блоге: 4

25.10.2015, 08:43

Visual Basic

1	From дисциплины and avg(экзамен.оценка)>=4 From экзамен

явно пропущено WHERE и первая часть условия и зачем то второй FROM

шапоклякистка 8-го дня

3672 / 2232 / 391

Регистрация: 26.06.2015

Сообщений: 4,647

Записей в блоге: 1

26.10.2015, 08:17

Сообщение от shanemac51

зачем то второй FROM

Там подзапрос

7262 / 4465 / 287

Регистрация: 12.08.2011

Сообщений: 13,448

26.10.2015, 09:18

Сообщение от Chrono_

НУЖНО:

Сначала сделать в конструкторе с нормальными связями, потом sql-представление скопировать в VBA. Представленный ужас с декартовым умножением трёх таблиц даже обсуждать не хочу.

шапоклякистка 8-го дня

3672 / 2232 / 391

Регистрация: 26.06.2015

Сообщений: 4,647

Записей в блоге: 1

26.10.2015, 12:43

Где там три таблицы? Я вижу только одну, тблИнвентаризацииОценки.

P.S. Хотя в приведенном коде мне кажется странным буквально все, начиная с идеи открывать необновляемый рекордсет, содержащий единственную запись.

Добавлено через 1 минуту
Я бы подзапрос сохранила как объект базы данных, а потом нужные количества и суммы доставала из него функуциями DCount и DSum.

26772 / 14451 / 3192

Регистрация: 28.04.2012

Сообщений: 15,782

26.10.2015, 12:47

Сообщение от texnik-san

Где там три таблицы? Я вижу только одну, тблИнвентаризацииОценки.

Обсуждается пост Ошибка 3075 в запросе, пишет отсутствует оператор И там действительно три

Сообщение от Chrono_

s = s & » From студенты, экзамен, дисциплины»

Добавлено через 2 минуты
Эта задача уже решена в другом топике Chrono_ — Ошибка 3075

Источник

Status: Not open for further replies.

First let me say that I am new to Access. I currently using Access 2010. In my table I have 10 Fields, the field names are below:

EmployeeEntry = AutoNumber
EmployeeNumber=Text
FirstName=text
LastName=text
Title=text
EmailAddress=text
workphone=text
extension=text
HireDate=date/time
Notes=Memo

VBA Code:

Private Sub cmdAdd_Click()
   'adds data to table
   'refresh data in table
   CurrentDb.Execute "INSERT INTO MaintenanceEmployees(EmployeeNumber,FirstName,LastName,TItle,EmailAddress,WorkPhone,Extension,HireDate)" & _
      "VALUES('" & Me.EmployeeNumber & ",'" & Me.FirstName & "','" & Me.LastName & "','" & Me.TItle & "','" & Me.EmailAddress & "','" & _
      Me.WorkPhone & "','" & Me.Extension & "','" & Me.HireDate & "')"
   
End Sub

Workdays for a market open Mon, Wed, Friday?

Yes! Use «0101011» for the weekend argument in NETWORKDAYS.INTL or WORKDAY.INTL. The 7 digits start on Monday. 1 means it is a weekend.

First let me say that I am new to Access. I currently using Access 2010. The error message states «Syntax error (missing operator) in query expression» Then it shows my entry followed by «,»,» for entries that don’t apply to that person.

In my table I have 10 Fields, the field names are below:

EmployeeEntry = AutoNumber
EmployeeNumber=Text
FirstName=text
LastName=text
Title=text
EmailAddress=text
workphone=text
extension=text
HireDate=date/time
Notes=Memo
VBA Code:
Private Sub cmdAdd_Click()
   'adds data to table
   'refresh data in table
   CurrentDb.Execute "INSERT INTO MaintenanceEmployees(EmployeeNumber,FirstName,LastName,TItle,EmailAddress,WorkPhone,Extension,HireDate)" & _
      "VALUES('" & Me.EmployeeNumber & ",'" & Me.FirstName & "','" & Me.LastName & "','" & Me.TItle & "','" & Me.EmailAddress & "','" & _
      Me.WorkPhone & "','" & Me.Extension & "','" & Me.HireDate & "')"
  
End Sub

When I Google «vba 3075», I get this as the first hit, which seems to describe and solve your exact problem…

Specifically, you are missing an apostrophe. Try this:

VBA Code:

"VALUES('" & Me.EmployeeNumber & "','" & Me.FirstName & "','" & Me.LastName & "','" & Me.TItle & "','" & Me.EmailAddress & "','" & _

That worked. I can’t believe I missed that. Any advise on how to prevent this in the future. Thank You

That worked. I can’t believe I missed that. Any advise on how to prevent this in the future. Thank You

When you run into an issue like this, step through the code and view the SQL string in the immediate window. That can often be enough to spot the issue. If you’re still stuck at that point, you can copy-paste the SQL to a query in the query editor and try to run it. The error messages there aren’t always more helpful but the query editor will sometimes put the cursor where the problem is so you at least know where to look while you try to figure out what to do.

Try using this syntax to fix your runtime error
Private Sub Command8_Click()
Dim SQL As String

SQL = «SELECT tblVisit.PatientID, tblPatients.Firstname, tblPatients.Lastname» _
& «DateDiff(‘yyyy’,[tblPatients]![Birthday],Now()) AS Age, tblVisit.[Date Visit]» _
& «tblVisit.Diagnosis» _
& «[First Name] & ‘ ‘ & [Last Name] AS [Prescriber Names] FROM tblPatients INNER JOIN (tblDoctor INNER JOIN tblVisit ON tblDoctor.DoctorID = tblVisit.DoctorID) ON tblPatients.PatientID = tblVisit.PatientID» _
& «WHERE [Firstname] = ‘» & Me.txtKeywords & «‘ «

Me.subClientList.Form.RecordSource = SQL
Me.subClientList.Form.Requery

End Sub
?

The error is runtime error ‘3075’
syntax error (missing operator) in query expression ‘tvist’.[DateVisit]tblVist.Diagnosis[First Name]& ‘ ‘ [Last Name]’

Let me know if this works for you!
Matt Henry

you’re missing a lot of commas

VBA Code:

dim sql as string 

sql = ""

sql = "SELECT tblVisit.PatientID, tblPatients.Firstname, tblPatients.Lastname, " & vbcrlf
sql = sql & "DateDiff('yyyy', tblPatients.Birthday, Now()) AS Age, tblVisit.[Date Visit], " & vbcrlf
sql = sql & "tblVisit.Diagnosis, " & vbcrlf
sql = sql & "[First Name] & ' ' & [Last Name] AS [Prescriber Names] " & vbcrlf
sql = sql & "FROM " & vbcrlf
sql = sql & "tblPatients " & vbcrlf 
sql = sql & "INNER JOIN " & vbcrlf 
sql = sql & "( " & vbcrlf
sql = sql & "  tblDoctor " & vbcrlf 
sql = sql & "    INNER JOIN " & vbcrlf 
sql = sql & "  tblVisit " & vbcrlf 
sql = sql & "    ON " & vbcrlf 
sql = sql & "    tblDoctor.DoctorID = tblVisit.DoctorID " & vbcrlf 
sql = sql & ") ON tblPatients.PatientID = tblVisit.PatientID " & vbcrlf 
sql = sql & "WHERE " & vbcrlf  
sql = sql & "  [Firstname] = '" & Me.txtKeywords & "' " & vbcrlf

debug.print sql

I have the same error message but with different issue. I was trying to write a simple search in a split form and access seems to be hanging up on the DoCmd.ApplyFilter task line in both cases Search or Clear.

Search button error:

Clear button error:

VBA Code:

Option Compare Database

Private Sub Command22_Click()
' Search button
Call Search
End Sub
Sub Search()
Dim strCriteria, task As String

Me.Refresh
If IsNull(Me.OrderDateFrom) Or IsNull(Me.OrderDateTo) Then
    MsgBox "Kérem adjon meg dátum sort", vbInformation, "Dátum sor Szükséges"
    Me.OrderDateFrom.SetFocus
Else
    strCriteria = "([DATUM] >= #" & Me.OrderDateFrom & "& And [DATUM] <= #" & Me.OrderDateTo & "#)"
        task = "select * from tEFI2021 where (" & strCriteria & ") order by [DATUM]"
    DoCmd.ApplyFilter task
    
End If

End Sub

Private Sub Command23_Click()
Dim task As String

    Me.OrderDateFrom = Null
    Me.OrderDateTo = ""
        task = "select * from tEFI2021 where (" & strCriteria & ") order by [DATUM]"
        DoCmd.ApplyFilter task
    
     
End Sub

Any input would be greatly appriciated. Got stuck. Thanks.

For the first error, change the & to #.

For the second I can’t read it or even guess at what it’s about…

For the first error, change the & to #.

For the second I can’t read it or even guess at what it’s about…

Thank you very much, just found it myself but now the following error message popped up

Run-time error ‘3000’
Reserved error (-3201) no message for this error (trying to translate it)

The Clear button still have the same error as before.

translation: Run-time Error 3705 — Syntax error (missing operator) in query expression

Hope this makes sense, thank you.

Status: Not open for further replies.

Источник

Looking for some help here please.

Using msgbox it looks like my SQL statement is correct here but it’s throwing up the 3075 error (see attachments)

I’ve tried the SQL code as a 1 line like:

Code:

    strSQL1 = "UPDATE Item SET JobID = '" & Me.cboTargetJob.Value & "' " & "FROM Item INNER JOIN Job ON Item.JobID = Job.ID INNER JOIN UsedIT ON Item.ID = UsedIT.ItemID INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID INNER JOIN ItemCategory ON ItemType.ItemCategoryID = ItemCategory.ID WHERE Item.JobID = " & Me.cboSourceJob.Value & " AND ItemCategory.ID = " & Me.cboCategory.Value
    MsgBox strSQL1
    CurrentDb.Execute strSQL1, dbSeeChanges

and also as multiple lines like:

Code:

    strSQL1 = "'UPDATE Item set Item.JobID = '"
    strSQL2 = Me.cboTargetJob.Value & "' "
    strSQL3 = "FROM Item INNER JOIN Job ON Item.JobID = Job.ID INNER JOIN "
    strSQL4 = "UsedIT ON Item.ID = UsedIT.ItemID INNER JOIN "
    strSQL5 = "MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID INNER JOIN "
    strSQL6 = "ItemType ON MakeAndModel.ItemTypeId = ItemType.ID INNER JOIN   ItemCategory ON ItemType.ItemCategoryID = ItemCategory.ID "
    strSQL7 = "WHERE Item.JobID = " & Me.cboSourceJob.Value & " AND ItemCategory.ID = " & Me.cboCategory.Value & "'"
    
    strSQLfinal = strSQL1 + strSQL2 + strSQL3 + strSQL4 + strSQL5 + strSQL6 + strSQL7

2016-09-30 12_00_03-Microsoft Visual Basic for Applications — v4.07 [running] — [Form_F_RecentIt.png

16.4 KB · Views: 100
2016-09-30 12_00_49-Microsoft Visual Basic for Applications — v4.07 [running] — [Form_F_RecentIt.png

20.8 KB · Views: 106

In one part of your string you are referring to JobID as a string ‘8861’ and then later as a numeric value 9507 .
It can’t be both — so one or other is incorrect.

I would think it should be more like

Code:

s=s & "UPDATE Item  "
s=s & "INNER JOIN Job ON Item.JobID = Job.ID INNER JOIN "
s=s & "UsedIT ON Item.ID = UsedIT.ItemID INNER JOIN "
s=s & "MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID INNER JOIN "
s=s & "ItemType ON MakeAndModel.ItemTypeId = ItemType.ID INNER JOIN   ItemCategory ON ItemType.ItemCategoryID = ItemCategory.ID "
s=s & "set Item.JobID = " & Me.cboTargetJob.Value
s=s & " WHERE Item.JobID = " & Me.cboSourceJob.Value & " AND ItemCategory.ID = " & Me.cboCategory.Value & "'"

strSQLfinal = s

type stop after strSQLfinal
run the code
type ?strSQLfinal into the immediate window and hit return

copy the sql into the query builder
fix errors
update your code

I tried that previously Minty and again now. The first shouldn’t be a string anyway.

Its probably sometihng to do with VB/SQL single & double quote marks

2016-09-30 12_55_36.png

25.9 KB · Views: 92

Static:
Ran it in the immediate window but unsure what to do thereafter.
Copied it into the window where the code is and ran that as strSQLfinal but got the same
surrounded the strSQLfinal with single quotes as below

Code:

    strSQL1 = "'UPDATE Item set Item.JobID = "
    strSQL2 = Me.cboTargetJob.Value & " "
    strSQL3 = "FROM Item INNER JOIN Job ON Item.JobID = Job.ID INNER JOIN "
    strSQL4 = "UsedIT ON Item.ID = UsedIT.ItemID INNER JOIN "
    strSQL5 = "MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID INNER JOIN "
    strSQL6 = "ItemType ON MakeAndModel.ItemTypeId = ItemType.ID INNER JOIN   ItemCategory ON ItemType.ItemCategoryID = ItemCategory.ID "
    strSQL7 = "WHERE Item.JobID = " & Me.cboSourceJob.Value & " AND ItemCategory.ID = " & Me.cboCategory.Value & "'"

but now getting error:

3078 — The MS database engine cannot find the input table or query «UPDATE Item set Item.JobID = 8861 ……………..

The syntax for an update query is as follows;

Code:

UPDATE yourTable INNER JOIN Your joins go here
SET yourtable.yourNumericfield = value , yourtable.field2 = 'Stringvalue'
WHERE your criteria goes here ;

Create a manual one with hard coded values that does what you want, then slowly add in your form variables until it either breaks or it works

edit — You don’t need .Value on your control references as it’s the default property, and in fact it can cause problems with certain controls.

Ok I ran the following line in SQL management studio (which worked fine)

Code:

UPDATE Item set JobID = 8861 FROM Item INNER JOIN Job ON Item.JobID = Job.ID INNER JOIN UsedIT ON Item.ID = UsedIT.ItemID INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID INNER JOIN ItemCategory ON ItemType.ItemCategoryID = ItemCategory.ID WHERE Item.JobID = 9507 AND ItemCategory.ID = 13"

Then I copied the same line into my SQL string in VB as:

Code:

strSQL1 = "UPDATE Item set JobID = 8861 FROM Item INNER JOIN Job ON Item.JobID = Job.ID INNER JOIN UsedIT ON Item.ID = UsedIT.ItemID INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID INNER JOIN ItemCategory ON ItemType.ItemCategoryID = ItemCategory.ID WHERE Item.JobID = 9507 AND ItemCategory.ID = 13"

And got the following error «Syntax error (missing operator) in query expression ‘8861 FROM Item…….BLAH…….ItemCategory.ID’

It’s missing the first bit of the query? i.e. UPDATE Item set JobID =

if I enclose the full query with single quotes like
strSQL1 = «‘UPDATE……BLAH…..ItemCategory.ID = 13′»
then I get the error
The MS Access database engine cannot find the input table or query «UPDATE Item…..BLAH

Static:
Ran it in the immediate window but unsure what to do thereafter.

Ran what in the immediate window. You just run the code as normal. STOP acts like a breakpoint. While the code is paused you can query variables. Follow the instructions.

UPDATE Item set JobID = 8861 FROM Item

should be

UPDATE Item set JobID = 8861

You don’t need FROM

Same problem Static!

See the screenie. This is driving me bonkers. I can see nothing wrong with it!

Also, I needs the «FROM Item» if running it in SQL studio, maybe VBA is different

2016-09-30 14_57_53.png

26 KB · Views: 160

Ok I ran the following line in SQL management studio (which worked fine)

Do you actually mean SQL Server Management Studio, or the Access Query design view SQL window?

If you are building the query in SSMS it won’t transfer to Access vba, there are subtle differences.

SQL Server Management Studio
Damn, I thought that it’d just pass the query direct through to SQL server.
No doubt that’s where I’m going wrong. Gah

If you do the same in the Access query designer, then switch to SQL view that will give you the syntax Access VBA expects. It’s very similar but not exactly the same.

GAAAAAh

This is what I have! All Access says is «Syntax error» but doesn’t give a clue to what the error is!

Code:

UPDATE ITEM
(((INNER JOIN Job ON Item.JobID = Job.ID) 
INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID) 
INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID) 
INNER JOIN ItemCategory ON ItemType.ItemCategoryID = ItemCategory.ID
set JobID = 8861
WHERE Item.JobID = 9507 AND ItemCategory.ID = 13;

Is that a result of you building the query in the access query designer? (From scratch?)
Build it as a select query first to get the records you want.

A fresh Monday morning try at this now

REbuilt the query in designer as a SELECT and retrieved the correct records.

Code:

SELECT Job.JobNumber, Item.ID AS ItemID, ItemType.ItemCategoryID, Item.JobID
FROM ((Item INNER JOIN Job ON Item.JobID = Job.ID) INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID) INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID
WHERE (((ItemType.ItemCategoryID)=13) AND ((Item.JobID)=9507));

Replaced the SELECT statement with UPDATE ITEM
Inserted the SET statement

Code:

UPDATE Item
FROM ((Item INNER JOIN Job ON Item.JobID = Job.ID) INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID) INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID
SET Item.JobID = 8861
WHERE (((ItemType.ItemCategoryID)=13) AND ((Item.JobID)=9507));

But getting syntax error in update statement

Took out the FROM as you mentioned previously but still syntax error

Try

Code:

UPDATE Item INNER JOIN Job ON Item.JobID = Job.ID INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID
SET Item.JobID = 8861
WHERE ItemType.ItemCategoryID=13) AND Item.JobID=9507 ;

I hate the number of brackets the query builder sometimes uses…

Still syntax error (see attached)
Tried also without the extra bracket after 13

2016-10-03 09_25_07.png

16.6 KB · Views: 57

Okay — I must be suffering MondayMorningItis :eek:
Go back to your query builder create the select query , then change it to a update query and see what it gives you…

Ok the following works as a select

Code:

SELECT Job.JobNumber, Item.ID AS ItemID, ItemType.ItemCategoryID, Item.JobID
FROM ((Item INNER JOIN Job ON Item.JobID = Job.ID) 
INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID) 
INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID
WHERE ItemType.ItemCategoryID=13 AND Item.JobID=9507;

converted to Update like so generates syntax error (tried with and without the FROM)

Code:

UPDATE Item
FROM ((Item INNER JOIN Job ON Item.JobID = Job.ID) 
INNER JOIN MakeAndModel ON Item.MakeAndModelID = MakeAndModel.ID) 
INNER JOIN ItemType ON MakeAndModel.ItemTypeId = ItemType.ID
SET Item.JobID = 8861
WHERE ItemType.ItemCategoryID=13 AND Item.JobID=9507;

Wondering if I should make the select into an SQL view and try a simple update on the view without all the inner joins in access….

Convert it in the query designer — right click and select query type then choose Update Query.

Источник

Question

Answers

Question

Answers

How to fix the Runtime Code 3075 Microsoft Access Error 3075

About Runtime Code 3075

Definitions (Beta)

Symptoms of Code 3075 — Microsoft Access Error 3075

Causes of Microsoft Access Error 3075 — Code 3075

Repair Methods

Method 1 — Close Conflicting Programs

Method 2 — Update / Reinstall Conflicting Programs

Method 3 — Update your Virus protection program or download and install the latest Windows Update

Method 4 — Re-install Runtime Libraries

Method 5 — Run Disk Cleanup

Method 6 — Reinstall Your Graphics Driver

Method 7 — IE related Runtime Error

Other languages:

STEP 1:

STEP 2:

STEP 3:

Speed Up Tip #10

Анализ «Microsoft Access Error 3075»

Что на самом деле вызывает ошибку времени выполнения 3075?

Распространенные проблемы Microsoft Access Error 3075

Истоки проблем Microsoft Access Error 3075

Решение

Решение

Читайте также: