Sbl oms 00203 error null invoking method null for business service null

Applies to:

Siebel Life Sciences CRM — Version: 8.0.0.1 SIA [20408] to 8.1 SIA [21039] — Release: V8 to V8
Information in this document applies to any platform.

Symptoms

When deploying an ADM package containing Audit Trail Admin data type
objects, a failure is encountered with one particular record. The
command window displays the following error:

Some of the current deploy/restore requests failed,
please use 'status' command to list the detail status or check the agent
log for detail error (SBL-DMJ-00317).

In the
Administration — Server Management > Jobs view, the following error
message is displayed for the failing «Application Deployment Manager
Processor» job:

SBL-OMS-00203: Error (null) invoking method "(null)" for Business Service "(null)"

The management agent log files show the following additional error message:

SBL-APS-00133: The current State Model's active period
is overlapped with the following State Model(s): 'LS Clinical Trip
Report Status'

Cause

The problem was caused by a conflict between the standard State Model
already present in the deployment environment and the State Model in the
ADM package.

Please note that there can only be one State Model for the same business component with the same active period.

Solution

The problem was resolved after deleting the standard State Model already
present in the deployment environment (‘LS Clinical Trip Report Status’
in this example) and deploying the ADM package again.

Applies to:

Siebel System Software — Version: 7.5.3 [16157] and later   [Release: V7 and later ]
Information in this document applies to any platform.
Error Message Area:Object Manager — OMS
Version:Siebel 7.5.3

Purpose

This document is intended to provide cause and corrective action
information about Siebel Error Message SBL-OMS-00203: Error %3 invoking
method «%2» for Business Service «%1»

Scope

This document is informational and intended for any user.

Explanation

This error message is usually reported when errors are encountered
upon executing a method within a business service. The error message is
usually accompanied with an additional follow up error message that
indicates reason for failure, as shown below:

OMS-00203: Error 33016 invoking method «RunProcess» for Business Service «Workflow Process Manager»
Error invoking service ‘EAI Siebel Adapter’, method ‘Upsert’ at step ‘Update Camp Con’.
Cannot
find entry ‘0-R9NH’ in the bounded pick list for the field ‘Contact
Organization’ in Integration component ‘Contact’
(IDS_ERR_EAI_SA_PICK_VALIDATE))

The cause for the error is
peculiar to each situation hence covering all possible scenarios is not
feasible. The accompanying error message is usually indicative of the
problem at hand. As in the above case, it was caused by a missing entry
in a bounded pick list.

To further diagnose this behavior, you
can increase the ObjMgrBusServiceLog and ObjMgrExtLangLog logging events
for the specific server component. NOTE: You can also set these events
for the Workflow Process Manager. For example, if this error was
reported within a Call Center Object Manager user session, the following
event levels would be set to acquire more details on the reason for
this failure. Some additional event level logging might also be required
and varies from case to case.

srvrmgr> change evtloglvl ObjMgrBusServiceLog=4 for comp SCCObjMgr_enu
srvrmgr> change evtloglvl ObjMgrExtLangLog=4 for comp SCCObjMgr_enu

For more information about setting these logging events for the Application Object Manager, refer to Document 477897.1 How Can Tracing Be Increased for the Siebel Object Manager?

NOTE: The following bookshelf version is also applicable to the
version listed in the header of this error message documentation. Also
review the Siebel Bookshelf version 7.8 > System Monitoring and
Diagnostics Guide for Siebel eBusiness Applications > Configuring
Siebel Server and Component Logging > Configuring Siebel Server
Component Logging > Common Event Types for Application Object Manager Diagnostics.

For information about debugging scripts, refer to Document 476793.1 Tips for Debugging Siebel eScript or Siebel VB and Document 477452.1
Using TraceOn, Trace, and TraceOff methods in Siebel Script.  Review
the subsequent logs to assist in troubleshooting this error message.

In
Siebel version 7.5.3 or earlier, you may encounter these errors while
trying to build a Siebel Client Repository File language code kit.

SBL-OMS-00107: Object manager error: ([0] Error in getting file from Upgrade Kit Wizard File Attachment

SBL-OMS-00203: Error 37002 invoking method «Create Upgrade Kit» for Business Service «Upgrade Kit Wizard OMSV»

This
error will occur if the upgrade kit name does not have the language
code string, such as _ENU, included. Change Request 10461805 has been
logged to address this product defect.

Corrective Action

It
is not feasible to list all the Corrective Actions to resolve this
error because the solution will vary with each specific situation. After
enabling the event logging for the particular server component, you
should review the appropriate log file for additional information. Then
take appropriate action depending on the cause of the error. After the
behavior has been corrected, do not forget to reset the event logging
levels back to the default value of 1 for the server component to reduce
the amount of information generated in the log files.

If you are
encountering this error while trying to build a Siebel Client
Repository File language code kit, then create a new upgrade kit that
includes the language code string in the kit name, for example SRF_ENU.
Change Request 10461805 has been fixed in Siebel version 7.7.

Applies to:

Siebel Reports — Version: 8.1.1.2 and later   [Release: V8 and later ]
Information in this document applies to any platform.

Symptoms

Sometimes when invoking a BI Publisher report and after submitting the user may receive the following error message :

"SBL-OMS-00203: error <?> When calling the method "<?>" For Business Service "<?>""

With
increased logging enabled on the XMLPReportServer (change evtloglvl %=5
for comp XMLPReportServer), the following errors were visible in the
log files at the point at which the UploadFiles is performed :

EAIQrySpec EAIQrySpecParams 3 00015bcb4c2a1ec4: 0
2010-07-01 13:39:04 The object ID for the''type 'GDP DH Opportunity'
specified query is '[DH Opportunity - Detail TA.Id] = '1-D78ZB' AND [.
Activity UID]> = '1-D78ZBTechnical000 "AND [. Activity UID] <=
1-D78ZBTechnical999" '

Cause

The behavior is caused because of a missing Integration Component

Solution

After adding the missing Integration Component everything works as expected.

Applies to:

Siebel Reports — Version: 8.1.1.1 [21211] and later   [Release: V8 and later ]
Information in this document applies to any platform.

Symptoms

Siebel BI Publisher Reports that display signature (captured using Signature Capture feature in Siebel) fail to generate.

How to Reproduce

1. Install and configure Siebel CRM 8.1.1.3 SIA and Oracle BI Publisher 10.1.3.4.1.

2. Create custom reports that display signature (captured in the Siebel CRM application).

3. Report generation fails with the error mentioned below.

XMLP Report Server Component log file:

BI Publisher XDO logs:


Cause

The issue has been caused due to the XSLT processing error on the BI
Publisher Server. The following property under the ‘Runtime
Configuration > Properties’ had been enabled:

Enable scalable feature of XSLT processor = True

The scalable feature chunks the XML data in smaller parts for better
processing. But when XML data containing signature string is chunked, it
results in XSLT processing error and therefore causing the report
generation to fail.

Solution

The issue can be resolved by following the steps given below:

1. Log into the BI Publisher Server as ‘Administrator’.

2. Navigate to the ‘Admin’ tab > ‘Runtime Configuration’ > ‘Properties’ page.

3. Set the following property in the ‘FO Processing’ section:

Enable scalable feature of XSLT processor = False

4. Apply the changes.

5. Restart BI Publisher Services.

6. Test run the signature report.

Applies to:

Siebel Anywhere — Version 7.5.3 SIA [16157] and later
Siebel Remote — Version 7.5.3 SIA [16157] and later
z*OBSOLETE: Microsoft Windows 2000
***Checked for relevance on 30-Aug-2012***
Product Release: V7 (Enterprise)
Version: 7.5.3 [16157] Com/Med
Database: Oracle 9.2.0.2
Application Server OS: Microsoft Windows 2000 Advanced Server SP 2
Database Server OS: Sun Solaris 2.8

This document was previously published as Siebel SR 38-1088344191.

Symptoms

Errors: SBL-OMS-00203, SBL-OMS-00107

We have recently upgraded our UAT environment from Siebel release
7.2.218 to 7.5.3. We as part of this release we have applied a dev2prd.
As we have a replicated environment we are trying to use Siebel Anywhere
to apply the dev2prd changes via a Database Schema upgrade kit.
Unfortunately this is failing with the following error:

SBL-OMS-00203: Error 25064 invoking method "Create Upgrade Kit" for Business Service "Upgrade Kit Wizard OMSV"

This worked before the upgrade to 7.5.3. I have increased event
logging for the upgrade Kit Builder process to 4 and will attach the log
file which pretty much says that it cant find the ddl.dat file and
gives the following error:


Object manager error: ([0] You are not connected to a valid file server.

I assume this means it can not access the siebfile.  I have found a
related Service Request #38-927731951 and followed its recommendations,
but these do not appear to help.
The database Schema Upgrade Kit is being run from a dedicated client.
Please let me know if you need any further information.

Cause

Wrong setup

Solution

Message 1

For the benefit of other readers, attempts to create Siebel Anywhere
kits would fail with the following in the UpgKitBldr*.log file after
“Part 4 of 4: Adding DDL file: d:siebel1siebsrvrtempddl.dat”:


SBL-SVR-03005: No server connect string for Siebel Component SRBroker in Siebel Enterprise dtcIsen01, Siebel Server dtciswf01.
Please check whether SRBroker is running on server dtciswf01 in enterprise dtcIsen01.

If you are using web client, please make sure that the
DSRequestServer is empty or set to the server you want in case you have
special requirement.
If you are using dedicated client, please make sure that Gateway name,
Enterprise name, Server name and RequestServer is set properly in CFG
file.

Otherwise, you may see these related error messages, as well:


SBL-SVR-03005: No server connect string for Siebel Component (null) in Siebel Enterprise (null), Siebel Server (null)
SBL-SVR-03005: No server connect string for Siebel Component (null) in Siebel Enterprise (null), Siebel Server (null)
SBL-OMS-00107: Object manager error: ([0] You are not connected to a
valid file server. Please contact your system administrator.
SBL-OMS-00203: Error 25064 invoking method "Create Upgrade Kit" for Business Service "Upgrade Kit Wizard OMSV"

The UpgKitBldr task was trying to connect to the SRBRoker on server
dtciswf01, but could not establish the network connection. Review of the
customer’s siebns.dat file showed the following parameter was set for
the Named Subsystem «ServerDataSrc:»

DSRequestServer = dtciswf01

This was causing UpgKitBldr to attempt to process all requests using the
SRBroker on server dtciswf01. By unsetting this parameter, UpgKitBldr
uses a round robin approach to process the requests, finding an SRBroker
that is running on any given server within the enterprise.   The
customer followed the steps in «Changing DSRequestServer to an Empty
String or Null Value (Doc ID 476817.1)” to unset this parameter.

The customer was also provided with the following recommendations:

1. Reduce Maximum Tasks parameter for SRBroker to 100 from 150
2. Set Maximum MT Servers to the default value of 1 for UpgKitBldr

After the above changes, the customer rebooted the Siebel Server machines and restarted the Siebel Server services.
Kit creation was then consistently successful.

Applies to:

Siebel System Software — Version 8.0.0.1 [20408] and later
z*OBSOLETE: Microsoft Windows Server 2003
Product Release: V8 (Enterprise)
Version: 8.0 [20405]
Database: Oracle 10.2.0.2
Application Server OS: Microsoft Windows 2003 Server SP1
Database Server OS: IBM AIX 5L 5.3

This document was previously published as Siebel SR 38-3301597043.

Symptoms

Customer was trying to demonstrate Siebel Search using FAST Instream and
were receiving errors from the Search Data Processor and the Search
Incremental Indexer. Search Daa Processor is repeatedly failing with
error — “The method ‘CreateIncrementalFullIndex’ is not supported on
Business Service ‘Search Data Processor’.”

Customer was able to index manually.

Customer had setup the RunTime event (although they did not have any
custom search objects) and receive the following error everytime the Job
is run:

SBL-OMS-00203: Error (null) invoking method «(null)» for Business Service «(null)».

Cause

Bug 10521046

Solution

The same scenario was tested inhouse and found that –
When there’s no records to update index, the Incremental Search Indexer is failing with error:
SBL-OMS-00203: Error (null) invoking method «(null)» for
Business Service «(null)».

  Bug 10521046 has been raised to rectify this problem in siebel search 8.0 [20405]

Applies to:

Siebel Workflow — Version: 7.5.2.100 [15252] and later   [Release: V7 and later ]
z*OBSOLETE: Microsoft Windows 2000
Product Release: V7 (Enterprise)
Version: 7.5.2.100 [15252]
Database: Oracle 8.1.7.4
Application Server OS: Microsoft Windows 2000 Server SP 2
Database Server OS: Microsoft Windows 2000 Server SP 2

This document was previously published as Siebel SR 38-1170955858.

Symptoms

The customer created a workflow process that invoked Assignment Manager
using the Synchronous Assignment Manager Requests business service. The
process was invoked from a policy with a duration.

Workflow
Process Manager and Assignment Manager tasks sometimes failed when
trying to assign a locked record. Ignore Errors was set to True so the
Workflow Monitor Agent should have tried to invoke the action for 2
minutes and then deleted the request and moved onto the next one if the
action had not completed correctly. However, in this case, the Monitor
Agent kept invoking the Process Manager and Assignment Manager over and
over again.

Cause

The reported behavior occurred because the request was not purged from
S_ESCL_STATE at the end of retry interval and, as a result, the Monitor
Agent processed it over and over again. Change request Bug 10490713 has
been raised to address this defect. Please note that all requests are
reviewed and prioritized for possible inclusion in a future release.

Solution

The Monitor Agent worked correctly for policies that did not include a
duration. The customer prevented tasks from being invoked over and over
again by setting Ignore Errors to False. As a result, the Monitor Agent
task failed if the action did not complete correctly at the end of the
retry interval.

Applies to:

Siebel CRM Marketing, SPE — Version 8.2.1 SIA[22220] and later
Information in this document applies to any platform.

Symptoms

On : 8.2.1 SIA[22220] version, Siebel Marketing

When trying to load a campaign,
the following error occurs.

ERROR
————————

SBL-OMS-00203: Error (null) Invoking method «(null)» for Business Service «(null)»

STEPS
————————
The issue can be reproduced at will with the following steps:

1. Create Offer — AL 8.2 Offer
2. Create Treatment — AL 8.2 Phone Treatment
3. Create List — AL 8.2 List
4. Added two Contacts to the list of type ‘Imported’
James Bond
Jason Bourne
5. Verified that the Marketing workflows were all active.
6. Created Campaign — AL 8.2 Campaign
7. Associated Offer and Treatment.
8. Associated List via Segments/Lists view.
9. Allocated 100% to ‘AL 8.2 Phone Treatment’
10. Ran Campaign Load.
11. Errors out with:
Execution Status tab:
Argument » in step ‘Load Segment Tree Cells/Segments’ is not correctly
initialized or does not return valid data.(SBL-BPR-00107)

System Tasks tab:
Error/Warning : Argument » in step ‘Load Segment Tree Cells/Segments’
is not correctly initialized or does not return valid
data.(SBL-BPR-00107)

BUSINESS IMPACT
————————
The issue has the following business impact:
Due to this issue, users cannot load a Campaign in 8.2

Cause

 This is caused by missing Output Arguments in the related Business Service «Mktg Data Load Service»

Solution

 This issue is resolved in 8.2.2 — Bug # 10588766:

NOT Reproducible in 8.2.2:

Ran a Campaign Load in 8.2.2 SIA [22314]

1. Create Offer — AL 8.2 Offer
2. Create Treatment — AL Phone Treatment
3. Create List — AL 8.2 List
4. Added two Contacts to the list of type ‘Imported’
James Bond
Jason Bourne
5. Verified that the Marketing workflows were all active.
6. Created Campaign — Al 8.2.2 Campaign Test
7. Associated Offer and Treatment.
8. Associated List via Segments/Lists view.
9. Allocated 100% to ‘AL Phone Treatment’
10. Ran Campaign Load.
11. Worked successfully….No errors.

References

@NOTE:492369.1 — Workflow Process Manager
BUG:10588766 — [CR#12-1XEJIRJ][FR#12-1XEJISX] KIRKWOOD:CAMPAIGN LOAD WITH A LIST ASSCOIATED IS
NOTE:522229.1 — SBL-OMS-00203: Error 65535 invoking method «RunProcess» for Business Service «Workflow Process Manager»
NOTE:749587.1
— Repeating component request jobs «Search Incemental Indexing» for
OSES exit with error SBL-OMS-00203: Error (null) invoking method
«(null)» for Business Service «(null)».

Document Server fails generating Proposals — Install/Upgrade/Manage

I increased log level to 5, it shows the following: SBL-OMS-00203: Error (null) invoking method "(null)" for Business Service "(null)"Document Engine: Error: Failed to process request under context(docgensvc.cpp (2230)) SBL-EDC-00199: Unable to instantiate context for request. I tried to run the logged sql, and it is working as it has to. Usig Siebel 8.1.1 and IE8 (Siebel Web Client).When generating on the local computer, that's OK, so the template is OK. Does anybody have any idea? Some troubleshooting hints?

Related

Hi all,
i am installing oracle grc8.6.3 in windows 64 bit.
i have installed database,rcu,weblogic,soa successfully.in next step i have to install SOA Composite.
when i am running the wlst from oracle_soa1/common/bin and passing the parameter in the wls:/offline i am getting following error
i have set JAVA_HOME,WL_HOME,SOA_HOME correctly
please help me
wls:/offline> sca_deployComposite("http://localhost:8001","
D:oracledistcomposites1.zip",overwrite=true,user="weblogic",password="Newuser")
serverURL = http://localhost:8001
sarLocation = D:oracledistcomposites1.zip
partition = default
overwrite = 1
user = weblogic
forceDefault = 1
configplan = None
keepInstancesOnRedeploy = 0
timeout = -1
set user and password...
Processing sar=D:oracledistcomposites1.zip
created temp dir =C:UsersA-EXT-~4AppDataLocalTempdeploy_client_24c31e3a-db
09-43dd-92c7-cea134ccd56a
Adding sar file - C:UsersA-EXT-~4AppDataLocalTempdeploy_client_24c31e3a-db
09-43dd-92c7-cea134ccd56asca_EmailComposite_rev2.0.jar
INFO: Creating HTTP connection to host:sfre001t.statoilfuelretail.com, port:8001
INFO: Received HTTP response from the server, response code=500
---->Response code=500, error:There was an error deploying the composite on soa_
server1: Deployment Failed: Error occurred during deployment of component: Email
Process to service engine: implementation.bpel, for composite: EmailComposite: O
RABPEL-05250
Error deploying BPEL suitcase.
error while attempting to deploy the BPEL component file "D:oracleappproduct
OFMdomainuser_projectsdomainsgrc_domainserverssoa_server1dcsoa_d7580aa1-
6af4-4360-b47a-ce198c3d1d89"; the exception reported is: java.lang.NoClassDefFou
ndError: Could not initialize class com.collaxa.cube.util.JavaHelper
This error contained an exception thrown by the underlying deployment module.
Verify the exception trace in the log (with logging level set to debug mode).
thanks
Edited by: 902535 on May 2, 2012 10:59 AM 

I think you may have gotten confused with the installation guide.
If you're installing GRC, you should not be installing SOA or other components. There are 2 applications you can install from that distribution, GRCC or EGRCM. EGRCM is the one that refers to SOA's if needed, so even then you shouldn't need to install it for testing out the product.
I hope that helps! 

Hi,
i am installing grcm with soa.this step is given in oracle installation book. 

If you're installing EGRCM, I would recommend deciding if you NEED the SOA piece. EGRCM does not need SOA to work, this is merely if you have requirements for it.
If you find you still need it, I would recommend discussing this in the middleware forum since SOA issues aren't really dealt with here.

Hi, I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}  In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en May I know why this happening and a remedy for it. Appreciate you help.

I am trying to install Endeca Guided Search packages based on "Get Started Guide" in windows 7. MDEX6.2.2, Platform Service6.1.3, Workbench2.1.2 and Deployment Template were installed successfully without any errors and I was using default ports. Http Service and Tool Service were running with "endeca" account". However, when I tried to install the sample using initialize_services.bat under ..EndecaAppDemocontrol, I got the following error.Warning: unable to retrieve 'ITLHost' associated with customer component "ConfigManager'. ... Info: Setting definition for application 'Demo' Info: Setting definition for 'ITLHost' Severe: Caught an exception while checking provisioning. Caught by com.endeca.soleng.eac.toolkit.exception.EndecaCommunicationException com.endeca.soleng.toolkit.host.Host setDefinition - caught exception while setting host definition. caused by com.endeca.eac.client.ProvisioningFault sun.reflect.NativeConstructorAccessorImpl newInstance0 - null Finished updating EAC.Any idea and help?

Hi,make sure that all endeca services are running properly, especially endeca http service. if its running restart and try again.

I did not check http service and it showed running. I restarted it. But the thing was the same. Any direct ways to check if this service is properly running? Did i miss any components? Many thanks! TP

Hi,Try to restart all the endeca related services.. and check. please let me know the status

All: The customer is using SSIS web service task in SSIS to invoke a UCM load file web service. The url is - https://abcustomer.oraclecloud.com/publicFinancialCommonErpIntegration/ErpIntegrationService?wsdl The service is being invoked correctly. The file uploads correctly. However the server response has content-type set to text/xop+xml. The request content type is text/xml. This is throwing an error and causing the process to error out on the SSIS. Here is the error message. So any following tasks are all failing. Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The Web Service threw an error during method execution. The error is: Client found response content type of 'multipart/related;type="application/xop+xml";boundary="----=_Part_10474_413342170.1467329004932";start="<59325a6f-6d90-42ce-b321-3d02c24d47fd>";start-info="text/xml"', but expected 'text/xml'.The request failed with the error message:Any help would be appreciated on how to resolved this?

Hi, I have a few questions: Are you trying to upload a file to Webcenter Content (UCM) or are you trying to retrieve a file from it?How are you connecting to Webcenter Content (UCM)? regards, Peter ManoharanFusion Applications Developer Relations.

Hi,  I am running into issues when trying to save a markup which has either a stamp or an attachment. None of them saves and gives a message "Failed to save". Other markups will save properly without any issues. I am using the sample C# web service code provided in the integration SDK installation and modified it to work with oracle database. Jetty log attached. ERROR [qtp11172802-46] (ActionSave.java:276) - Exception: com.sun.xml.internal.ws.client.ClientTransportException: The server sent HTTP status code 500: Internal Server Error at com.sun.xml.internal.ws.transport.http.client.HttpTransportPipe.createResponsePacket(Unknown Source) ERROR [qtp11172802-46] (ActionSave.java:105) - Exception: com.cimmetry.vuelink.defs.VuelinkException: Failed to set file content while saving document Triggered by : com.sun.xml.internal.ws.client.ClientTransportException: The server sent HTTP status code 500: Internal Server Error at com.cimmetry.vuelink.wsclient.actions.ActionSave.doSave(ActionSave.java:277) ERROR [qtp11172802-46] (?:?) - Caught Exception in doPost com.cimmetry.vuelink.defs.VuelinkException: Failed to Save at com.cimmetry.vuelink.wsclient.actions.ActionSave.execute(ActionSave.java:106)  Thanks, Rajesh

I was able to fix this. It was the issue with .net web service rejecting large POST request. Increased the maxallowedcontentlength and it works fine. Thanks,Rajesh

Siebel SQLs/Error Messages >  SBL-OMS-00203, SBL-NET-01034, SBL-DAT-00523,SBL-CSR-00418 and SBL-UIF-00299

SBL-OMS-00203: Error %3 invoking method «%2» for Business Service «%1»

This error message is usually reported when errors are encountered
upon executing a method within a business service.
The error message is usually accompanied with an additional follow up error message that indicates reason for failure, as shown below:

OMS-00203: Error 33016 invoking method «RunProcess» for Business Service «Workflow Process Manager»
SBL-OMS-00203: Error … invoking method «RunProcess» for Business Service «Workflow Process Manager»
Cannot find entry ‘0-R9NH’ in the bounded pick list for the field ‘Contact Organization’ in Integration component ‘Contact’ (IDS_ERR_EAI_SA_PICK_VALIDATE))

The cause for the error is unique for almost all cases and does not have a standard solution.
In the above case, it was caused by a missing entry in a bounded pick list.

To diagnose this behavior, you can increase the ObjMgrBusServiceLog and ObjMgrExtLangLog logging events for the specific server component.

NOTE: You can also set these events for the Workflow Process Manager.
For example, if this error was reported within a Call Center Object Manager user session,
the following event levels would be set to acquire more details on the reason for this failure.
Some additional event level logging might also be required and varies from case to case.
srvrmgr> change evtloglvl ObjMgrBusServiceLog=4 for comp SCCObjMgr_enu
srvrmgr> change evtloglvl ObjMgrExtLangLog=4 for comp SCCObjMgr_enu

SBL-NET-01034: The SISNAPI connection was closed by the peer

This error message indicates that the Siebel server connection with the session was closed.
This can be caused for several reasons — network error can be one of them.
To check network errors, we had to ask the networking team to check if there was some
issue. There were no errors there.

We discovered that these error messages occurred around deployment time. We had shut down
Siebel servers and the errors occurred just after that. In such a case, these errors can be
ignored.

SBL-DAT-00523: The selected record has been modified by another user since it was retrieved

This means that some process is trying to update a row in a table and cannot find it.
This error occurred for us in 2 cases

1) Workflow was trying to update an opportunity that was deleted or did not fit the
workflow criteria. e.g. An opportunity with correct row_id but different name.
Some of these cases could be ignored. If the user had deleted an opportunity after modifying
it, this case can be ignored. If the opportunity exists with wrong values, we need to check
workflow logic. Increase log levels of Workflow and diagnose.

2) EAI object was searching for a record with some wrong variables. e.g. Account with
correct VAT number but wrong row_id. This was actually a design error with the integrated
system. The application interfacing with Siebel had different composite keys than Siebel.
Hence it was fetching incorrect records, multiple records or could not find the correct record.

SBL-CSR-00418: Communication: User is not associated with any communication configuration in the database.

These error messages will keep coming and can be ignored. Oracle support web says that in a future release, these messages will stop coming.From Oracle document — ID 536303.1.
If you are NOT using Siebel CTI Toolbar or CTI Functionality you can disable the Application Object Manager parameter «Enable Communications» setting it to False in Site Map>Administration — Server Configuration>Servers>Components>Parameters.
Now in case you have a mixed environment with Siebel CTI users and NO Siebel CTI users connecting to the same Application Object Manager,
currently the SComm_<user id>.log will be gerenated for ALL user and for the NO Siebel CTI users the error message will be logged into the SComm.log and Siebel Application Object Manager task log and a message will appear in the Application Menu Status Message in the User Interface for a couple of seconds.
Notice that in this case this error message is benign and can be ignored since the customer do not want to use Siebel CTI functionality at all although the Application Object Manager has the parameter Enable Communications for CTI enabled.
There is no possible workaround available to avoid this error mesage for Siebel users NOT associated to any Communications Configuration and login to a Application Object Manager with «Enable Communications» component parameter set to True.
Enhancement Request Bug 10503044 and Product Defect <> has been logged to stop to generate this error message in the SComm.log.
Enhancement Request Bug 10478422 has been logged to stop this error message from occurring in the Applicaiton Object Manager task log file too.
Currently this Enhancement are target to a future release.

SBL-UIF-00299: Wrong Field Values or value types.

This is usually a benign error. This happens when a user enters a different type of data in a field.
e.g. If the user enters a number in a string field or a non-existing value in a picklist, this error is logged.
If this error happens too often, check if some automated process is trying to insert incorrect values.