Service call error 00010035

Вернуться в «Принтеры EPSON»

Service call error 00010035

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

Question

I am getting Error 10035 after issuing Connect.

The Create method on the connect socket is successful.

Create and Listen on the Listening Socket are successful , the computerid and port parameters are correct and are set to «loopback» and 4000, which work OK on a similar program which is a Dialog application rather than an MDI application.

The OnAccept event is not issued on the Listening Socket and so the connection is not completed.

Does error10035 indicate a fault at the connect end and how can this be avoided.?

If not, what is wrong at the Listen end?

Are there any further levels of debug which I can use to understand this problem?

void CStrategy2View: nClient()
<

bool bool1,bool2,bool3;
int interr1,interr2,interr3;
// TODO: Add your command handler code here
interr1 = 0;
ConfigDlg.DoModal();
bool1=ConnectSocket.Create();
interr1 = ConnectSocket.GetLastError();
interr2 = 0;
bool2 = ConnectSocket.Connect(ConfigDlg.m_computerid,ConfigDlg.port);
interr2 = ConnectSocket.GetLastError();
Client = TRUE;

void CStrategy2View: nServer()
<

// TODO: Add your command handler code here
bool bool1,bool2;
int interr1,interr2;
bool1 = ListenSocket.Create(ConfigDlg.port);
interr1 = GetLastError();
bool2 = ListenSocket.Listen();
interr2 = GetLastError();
Client = FALSE;

Error 10035 is described as:

What this means is the operation would normally be a blocked operation (i.e would only return when completed) but is operating in a non blocking mode, thus it did not have time to complete.

Источник

Ошибка: 10035 Winsock Send

Добрый день, недавно обнаружил проблему в работе, генерирует ошибку 10035, генерируя несколько и несколько раз ошибку, из-за которой клиентское соединение больше не является удаленным и существует задержка без эмулятора. Сходство с ошибкой, и я не могу найти ее решение, если кто-нибудь может дать мне понять, как я могу решить эту ошибку, я благодарю. код выглядит следующим образом:

xxxx: Произошла ошибка при отправке пакета. Всего отправлено: 500. Ошибка: 10035 xxxx: Ошибка при отправке пакета. Всего отправлено: 568. Ошибка: 10035

Я не знаю, можно ли отменить следующую ошибку или что-то в этом роде, потому что, когда она происходит, она почти мгновенно вызывает отключение пользователя, но остается на связи.

Решение

Ошибка 10035 WSAWOULDBLOCK , которая НЕ является фатальной ошибкой, но вы относитесь к ней так, как если бы она была.

Вы, очевидно, используете неблокирующая сокет, иначе вы не получите эту «ошибку». Таким образом, вы должны учитывать возможность того, что send() может не удается заблокировать вызывающий поток (потому что получателю не хватает места в буфере для получения большего количества данных).

Просто повторите то же самое send() снова, предпочтительно предшествуя вызову select() подождать (с необязательным таймаутом), чтобы получатель освободил некоторое буферное пространство, прежде чем отправлять данные снова.

Попробуйте что-то вроде этого:

Или, если вы хотите, чтобы функция выходила при блокировке, и не ожидала полной отправки данных, а завершила отправку позднее:

Источник

Форум по СНПЧ: Сервисные коды — Форум по СНПЧ

Сервисные коды

| Сообщение #1 Отправлено 20 октября 2012 — 14:32 ugrinov_ss

EPSON GS6000 ERROR CODES

Maintenance Request Errors
MAINTENANCE REQUEST — 0001 — The CR scan pass counter has reached the specified value. MAINTENANCE REQUEST — 0011 — The RTC backup battery becomes exhausted.
MAINTENANCE REQUEST — 0111 — The date has not been set.
MAINTENANCE REQUEST — 0100 — The following two errors are occurring simultaneously, 0001 & 0011
MAINTENANCE REQUEST — 1000 — The following two errors are occurring simultaneously, 0001 & 0011
MAINTENANCE REQUEST — 1010 — The following two errors are occurring simultaneously, 0011 & 0111

Service Call Errors
SERVICE CALL ERROR — 1101 — Life end of the CR MOTOR
SERVICE CALL ERROR — 1125 — Carriage home position detection
SERVICE CALL ERROR — 1133 — CR MOTOR in position time-out error
SERVICE CALL ERROR — 1135 — CR ENC ASSY check error
SERVICE CALL ERROR — 1136 — CR MOTOR step-out error
SERVICE CALL ERROR — 1137 — CR servo parameter error
SERVICE CALL ERROR — 1223 — PF ENCODER ASSY check error
SERVICE CALL ERROR — 1225 — PF MOTOR in position time-out error
SERVICE CALL ERROR — 1227 — PF MOTOR step-out error
SERVICE CALL ERROR — 1228 — PF servo parameter error
SERVICE CALL ERROR — 131B — Head driver (transmission gate) overheat error
SERVICE CALL ERROR — 1700 — Print position error
SERVICE CALL ERROR — 1900 — HEATER CONT BOARD ASSY serial connection failure
SERVICE CALL ERROR — 1902 — Over Temp PRE HEATERS(64) on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1903 — Over Temp PLATEN HEATER(64) on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1904 — Over Temp AFTER HEATER(64) on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1905 — Over Temp PRE HEATERS(64) on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1906 — Over Temp PLATEN HEATER(64) on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1907 — Over Temp AFTER HEATER(64) on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1908 — An abnormal voltage of the heater on the HEATER CONT BOARD ASSY
SERVICE CALL ERROR — 1909 — Comms Failure HEATER CONT BOARD ASSY and SUB-B/C BOARD
SERVICE CALL ERROR — 1910 — Under Temp PRE HEATERS(64) on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1911 — Under Temp PLATEN HEATER on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1912 — Under Temp AFTER HEATER on the HEATER RELAY BOARD ASSY
SERVICE CALL ERROR — 1920 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 1 failure
SERVICE CALL ERROR — 1921 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 2 failure
SERVICE CALL ERROR — 1922 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 3 failure
SERVICE CALL ERROR — 1923 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 4 failure
SERVICE CALL ERROR — 1924 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 5 failure
SERVICE CALL ERROR — 1925 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 6 failure
SERVICE CALL ERROR — 1926 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 7 failure
SERVICE CALL ERROR — 1927 — HEATER CONT BOARD ASSY-SUB TANK SENSOR 8 failure
SERVICE CALL ERROR — 1A23 — RTC analysis error
SERVICE CALL ERROR — 1A26 — RTC communication error
SERVICE CALL ERROR — 1A37 — Head thermistor error
SERVICE CALL ERROR — 1A38 — Transistor thermistor error
SERVICE CALL ERROR — 1A39 — Head error
SERVICE CALL ERROR — 1A40 — MAIN BOARD ASSY IC2 error
SERVICE CALL ERROR — 1A41 — Head rank ID input error
SERVICE CALL ERROR — 2000 — NVRAM error
SERVICE CALL ERROR — 2002 — SDRAM error
SERVICE CALL ERROR — 2003 — Boot program sum error
SERVICE CALL ERROR — 200A — Program loading error
SERVICE CALL ERROR — 200B — Internal insufficient memory error
SERVICE CALL ERROR — 200C — Servo interrupt watchdog time-out error
SERVICE CALL ERROR — 200D — System interrupt watchdog timeout error
SERVICE CALL ERROR — 200E — Unknown NMI
SERVICE CALL ERROR — 3000 — AC power shut-off
SERVICE CALL ERROR — FXXX — CPU-related error

EPSON 11880 ERROR CODES

Maintenance Request Errors
MAINTENANCE REQ — 0001 — The counter of waste ink at borderless printing has reached the specified value.
MAINTENANCE REQ — 0002 — The CR scan pass counter has reached the specified value.
MAINTENANCE REQ — 0008 — The RTC backup battery becomes exhausted.
MAINTENANCE REQ — 0040 — The pump counter has reached the specified value.
MAINTENANCE REQ — 0080 — The date has not been set.
MAINTENANCE REQ — 0100 — The RTC backup battery power has temporarily dropped.
MAINTENANCE REQ — 0088 — The RTC backup battery becomes exhausted and the date has not been set

Service Request Errors
SERVICE REQ — 1101 — Life end of the Ink Tube
SERVICE REQ — 1125 — Carriage home position detection error
SERVICE REQ — 1133 — The CR Motor in position time-out error
SERVICE REQ — 1135 — CR Encoder check error
SERVICE REQ — 1136 — CR Motor Step-out error
SERVICE REQ — 1137 — CR servo parameter error
SERVICE REQ — 1223 — PF Encoder check error
SERVICE REQ — 1225 — The PF Motor in position time-out error
SERVICE REQ — 1227 — PF Motor Step-out error
SERVICE REQ — 1228 — PF servo parameter error
SERVICE REQ — 1400 — Pressure failure error
SERVICE REQ — 1410 — Pump motor drive timeover error
SERVICE REQ — 1430 — Cartridge Holder Maintenance
SERVICE REQ — 1434 — Ink cover unlock error
SERVICE REQ — 1435 — Cap HP detection error
SERVICE REQ — 1436 — Select valve HP detection error
SERVICE REQ — 1437 — Cap motor drive timeover error
SERVICE REQ — 1441 — Pressure motor 1 acceleration error
SERVICE REQ — 1442 — Pressure motor 2 acceleration error
SERVICE REQ — 1443 — Pressure motor 3 acceleration error
SERVICE REQ — 1461 — Pressure motor 1 lock error
SERVICE REQ — 1462 — Pressure motor 2 lock error
SERVICE REQ — 1463 — Pressure motor 3 lock error
SERVICE REQ — 1471 — Pessure motor 1 reverse detection error
SERVICE REQ — 1472 — Pressure motor 2 reverse detection error
SERVICE REQ — 1473 — Pressure motor 3 reverse detection error
SERVICE REQ — 1511 — APG motor drive timeover error
SERVICE REQ — 1536 — Pressurizing reset failure
SERVICE REQ — 1700 — Print position error
SERVICE REQ — 1800 — AID voltage error
SERVICE REQ — 2000 — NVRAM error
SERVICE REQ — 2002 — SDRAM error
SERVICE REQ — 2003 — BOOT program sum error
SERVICE REQ — 3000 — AC power shut-off
SERVICE REQ — 131B — Head driver (transmission gate) overheat error
SERVICE REQ — 150C — PG HP detection error
SERVICE REQ — 16A0 — Cap unit status error 1
SERVICE REQ — 16A1 — Cap unit status error 2
SERVICE REQ — 16B0 — Cap HP detection retry error
SERVICE REQ — 1A23 — RTC analysis error
SERVICE REQ — 1A26 — RTC communication error
SERVICE REQ — 1A37 — Head thermistor error
SERVICE REQ — 1A38 — Transistor thermistor error
SERVICE REQ — 1A39 — Head error
SERVICE REQ — 1A40 — Main board IC2 error
SERVICE REQ — 1A41 — Head rank ID input error
SERVICE REQ — 200A — Program loading error
SERVICE REQ — 200B — Internal insufficient memory error
SERVICE REQ — 200C — Servo interrupt watchdog time-out error
SERVICE REQ — 200D — System interrupt watchdog time-out error
SERVICE REQ — 200E — Unknown NMI
SERVICE REQ — DXXX — Debug error
SERVICE REQ — FXXX — CPU-related error
SERVICE REQ — F000 — CPU-related error

EPSON 7700 9900 ERROR CODES

Maintenance Request Errors
MAINTENANCE REQ — 0002 — The CR scan pass counter has come near the specified life.
MAINTENANCE REQ — 0008 — The RTC backup battery becomes exhausted
MAINTENANCE REQ — 0010 — Communication with the AID Board is not established.
MAINTENANCE REQ — 0040 — The pump counter has come near the specified life.
MAINTENANCE REQ — 0080 — The date has not been set
MAINTENANCE REQ — 0800 — Cartridge waste ink pad near end of life
MAINTENANCE REQ — 1000 *1 — Ink Selector near end of life
MAINTENANCE REQ — 4000 — It detects twice in a row that all the nozzles are clogging.
MAINTENANCE REQ — 0088 — The RTC backup battery becomes exhausted and the date has not been set.

Service Request Errors
SERVICE REQ — 1101 — CR life error
SERVICE REQ — 1125 — CR HP detection error
SERVICE REQ — 1138 — Over current error
SERVICE REQ — 113A — Overload error
SERVICE REQ — 113B — Over speed error
SERVICE REQ — 113C — Reversing error
SERVICE REQ — 113D — Driving time-out error
SERVICE REQ — 113E — Velocity deviation error
SERVICE REQ — 113F — Lock error
SERVICE REQ — 122A — Overload error
SERVICE REQ — 122B — Over speed error
SERVICE REQ — 122C — Reversing error
SERVICE REQ — 122D — Driving time-out error
SERVICE REQ — 122E — Velocity deviation error
SERVICE REQ — 122F — Lock error
SERVICE REQ — 131B — Head driver (transmission gate) overheat error
SERVICE REQ — 13F0 — ICL operation error
SERVICE REQ — 1411 — Select error
SERVICE REQ — 1412 — Pump life error
SERVICE REQ — 1419 — Pump release error
SERVICE REQ — 141A — Overload error
SERVICE REQ — 141B — Over speed error
SERVICE REQ — 141C — Reversing error
SERVICE REQ — 141D — Driving time-out error
SERVICE REQ — 141E — Velocity deviation error
SERVICE REQ — 141F — Lock error
SERVICE REQ — 1427 — CSIC destination setting error
SERVICE REQ — 1428 — Ink holder Board Assy
SERVICE REQ — 1430 — Holder ink pad error
SERVICE REQ — 1431 — Ink selector life error
SERVICE REQ — 1434 — IC cover unlock error
SERVICE REQ — 1438 — Maintenance tank error
SERVICE REQ — 1439 — Cap error
SERVICE REQ — 143A — Overload error
SERVICE REQ — 143B — Over speed error
SERVICE REQ — 143C — Reversing error
SERVICE REQ — 143D — Driving time-out error
SERVICE REQ — 143E — Velocity deviation error
SERVICE REQ — 143F — Lock error
SERVICE REQ — 144A — Overload error
SERVICE REQ — 144B — Over speed error
SERVICE REQ — 144C — Reversing error
SERVICE REQ — 144D — Driving time-out error
SERVICE REQ — 144E — Velocity deviation error
SERVICE REQ — 144F — Lock error
SERVICE REQ — 1489 — Wiper error
SERVICE REQ — 148A — Overload error
SERVICE REQ — 148B — Over speed error
SERVICE REQ — 148C — Reversing error
SERVICE REQ — 148D — Driving time-out error
SERVICE REQ — 148E — Velocity deviation error
SERVICE REQ — 148F — Lock error
SERVICE REQ — 1494 — Ink selector error
SERVICE REQ — 1496 — Ink selector sensor error detection
SERVICE REQ — 1497 — Switching time-out error
SERVICE REQ — 149D — Driving time-out error
SERVICE REQ — 1501 — Release motor phase detection error
SERVICE REQ — 150C — PG phase detection error
SERVICE REQ — 151A — Overload error
SERVICE REQ — 151B — Over speed error
SERVICE REQ — 151C — Reversing error
SERVICE REQ — 151D — Driving time-out error
SERVICE REQ — 151E — Velocity deviation error
SERVICE REQ — 151F — Lock error
SERVICE REQ — 152A — Overload error
SERVICE REQ — 152B — Over speed error
SERVICE REQ — 152C — Reversing error
SERVICE REQ — 152D — Driving time-out error
SERVICE REQ — 152E — Velocity deviation error
SERVICE REQ — 152F — Lock error
SERVICE REQ — 1530 — Driven roller HP detection error
SERVICE REQ — 1536 — Pressurizing reset error
SERVICE REQ — 1537 — Pressurizing error
SERVICE REQ — 153A — Overload error
SERVICE REQ — 153B — Over speed error
SERVICE REQ — 153C — Reversing error
SERVICE REQ — 153D — Driving time-out error
SERVICE REQ — 153E — Velocity deviation error
SERVICE REQ — 153F — Lock error
SERVICE REQ — 1540 — Cutter HP detection error
SERVICE REQ — 1541 — Cutter return error
SERVICE REQ — 1549 — Motor disconnection error
SERVICE REQ — 154A — Overload error
SERVICE REQ — 154B — Over speed error
SERVICE REQ — 154C — Reversing error
SERVICE REQ — 154D — Driving time-out error
SERVICE REQ — 154E — Velocity deviation error
SERVICE REQ — 154F — Lock error
SERVICE REQ — 1551 — Paper thickness determining error
SERVICE REQ — 1561 — Paper thickness at power-on error
SERVICE REQ — 1800 — AID voltage error
SERVICE REQ — 1A23 — Incorrect RTC data error
SERVICE REQ — 1A26 — RTC Access T/O error
SERVICE REQ — 1A37 — Thermistor error
SERVICE REQ — 1A38 — Transistor environmental temperature error
SERVICE REQ — 1A39 — Head error
SERVICE REQ — 1A40 — IC22 error
SERVICE REQ — 1A41 — Head rank ID input error
SERVICE REQ — 1A50 — I2C communication error (Between elements on ASIC and MAIN)
SERVICE REQ — 1A51 — I2C communication error (Between elements on SUB and MAIN)
SERVICE REQ — 1A52 I- 2C communication error (Between elements on SUB-B and MAIN)
SERVICE REQ — 1A53 — I2C communication error (Between elements on SUB-C and MAIN)
SERVICE REQ — 2000 — NVRAM error
SERVICE REQ — 2002 — SDRAM error
SERVICE REQ — 2003 — FLASH BOOT SUM CHECK error
SERVICE REQ — 200A — F/W load error
SERVICE REQ — 200D — System interrupt watchdog time-out error
SERVICE REQ — 200E — Unknown NMI
SERVICE REQ — 2010 — UART communication error
SERVICE REQ — 3000 — AC shut-off
SERVICE REQ — D131 — AID error
SERVICE REQ — Fxxx — CPU-related error
SERVICE REQ — Dxxx — Debug error

Spectroproofer and Auto Take-Up Error Codes
NOTE: SpectroProofer-related errors do not occur on Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 because it does not support the SpectroProofer.
Auto Take-up Reel-related errors do not occur on Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/WT7900/WT7910//7890/7908 because it does not support the Auto Take-up Reel.
Errors related to the SpectroProofer and Auto Take-up Reel do not occur on Epson Stylus Pro 7700M/7710M.

D3 — Driving auto take-up system
D6 — Driving paper pressing system
65 — Cooling Fan lock detection error
12 — Paper Pressing Plate Sensor no detection error
13 — Foreign material detection error in paper pressing
14 — Paper pressing origin position detection failure error
15 — CR HP Sensor no detection error
16 — Paper pressing system abnormal measurement value error
17 — Take-up system abnormal measurement value error
20 — Slack Sensor no detection error
01 — Mechanism is not installed -(Mount Sensor is OFF)
30 — Driving time-out error
31 — Overload error
32 — Over speed error
33 — Reversing error
34 — Velocity deviation error
35 — Lock error
40- Driving time-out error
41 — Overload error
42 — Over speed error
43 — Reversing error
44 — Velocity deviation error
45 — Lock error
20 — Driving time-out error

Epson 7600 9600 Error Codes

Maintenance Requests Errors
MAINTENANCE REQ — 0040 — Cleaning unit is nearing the end of life.
MAINTENANCE REQ — 0002 — Carriage motor is nearing the end of life.
MAINTENANCE REQ — 0008 — RTC backup battery is empty.
MAINTENANCE REQ — 0020 — The number of shots (per nozzle) reaches the limit .
MAINTENANCE REQ — 0088 — The RTC backup battery is not installed.
MAINTENANCE REQ — 0080 — Data is not specified.
MAINTENANCE REQ — 0100 — RTC backup battery is dropped instantaneously.

Service Request Errors
SERVICE REQ — 00000101 — CR motor life
SERVICE REQ — 00010000 — PF motor encoder check error
SERVICE REQ — 00010001 — PF motor out of step
SERVICE REQ — 00010002 — PF motor overcurrent
SERVICE REQ — 00010003 — PF motor in-position time-out
SERVICE REQ — 00010004 — CR motor encoder check error
SERVICE REQ — 00010005 — CR motor out of step
SERVICE REQ — 00010006 — CR motor overcurrent
SERVICE REQ — 00010007 — CR motor in-position time-out
SERVICE REQ — 00010008 — Servo interrupt watchdog time-out
SERVICE REQ — 00010009 — System interrupt watchdog time-out
SERVICE REQ — 0001000A — CR home position sensor error
SERVICE REQ — 0001000B — PF home position sensor error
SERVICE REQ — 0001000C — Head slide (PG) home position sensor error
SERVICE REQ — 0001000F — CR motor PWM output faulty
SERVICE REQ — 00010010 — PF motor PWM output faulty
SERVICE REQ — 0001001B — Head driver (TG) temperature error
SERVICE REQ — 0001001D — CR servo parameter error
SERVICE REQ — 0001001E — PF servo parameter error
SERVICE REQ — 00010020 — CSIC reed/right error
SERVICE REQ — 00010022 — Ink type error (setting on printer body side)
SERVICE REQ — 00010023 — RTC analysis error
SERVICE REQ — 00010025 — CSIC ROM communication error
SERVICE REQ — 00010026 — RTC communication error
SERVICE REQ — 00010028 — Head error
SERVICE REQ — 00010029 — Unidentified NMI
SERVICE REQ — 0001002A — CR ASIC ECU error
SERVICE REQ — 0001002B — PF ASIC ECU error
SERVICE REQ — 00020000 — NVRAM error
SERVICE REQ — 00020002 — SDRAM error
SERVICE REQ — 00020003 — BOOT program SUM error
SERVICE REQ — 00020004 — NVRAM error (3K)
SERVICE REQ — 00020005 — NVRAM error (32K)
SERVICE REQ — 00020009 — Flash memory SUM error
SERVICE REQ — 0002000A — Program load error
SERVICE REQ — 0002000B — Internal memory shortage error
SERVICE REQ — 0002000C — Review error
SERVICE REQ — 100000E0 — CPU address error (load misalignment)
SERVICE REQ — 10000100 — CPU address error (storage misalignment)
SERVICE REQ — 10000180 — CPU reserve command code exception error
SERVICE REQ — 100001A0 — CPU slot illegal command exception error
SERVICE REQ — 100005C0 — CPU DMA address error
SERVICE REQ — 10000xxx — CPU error

Epson 7xx0 9xx0 Error Codes

Maintenance Requests Errors
MAINTENANCE REQ — 0002 — The number of carriage movement cycles reached the specified value.
MAINTENANCE REQ — 0008 — The RTC backup battery run down or is not installed.
MAINTENANCE REQ — 0040 — The pump counter reached the specified upper limit.
MAINTENANCE REQ — 0080 — The date and time has not been set.
MAINTENANCE REQ — 0100 — A momentary drop in voltage of the RTC backup battery
MAINTENANCE REQ — 0400 — The Pressure Pump counter reached the specified upper limit.

Service Request Errors
SERVICE REQ — 00000101 — The CR Motor reached its end of life.
SERVICE REQ — 00010000 — PF Encoder check error
SERVICE REQ — 00010001 — The PF Motor is out of step.
SERVICE REQ — 00010002 — Overcurrent occurred on the PF Motor.
SERVICE REQ — 00010003 — The PF Motor out of position time-out error
SERVICE REQ — 00010004 — CR Encoder check error
SERVICE REQ — 00010005 — CR Motor is out of step.
SERVICE REQ — 00010007 — The CR Motor out of position time-out error
SERVICE REQ — 00010008 — Servo interrupt watchdog time-out error
SERVICE REQ — 00010009 — System interrupt watchdog time-out error
SERVICE REQ — 0001000A — Carriage home position detection error
SERVICE REQ — 0001000C — PG home position detection error
SERVICE REQ — 00010014 — Failure of pressurizing
SERVICE REQ — 0001001B — Head driver (TG) temperature error
SERVICE REQ — 0001001D — CR servo parameter error
SERVICE REQ — 0001001E — PF servo parameter error
SERVICE REQ — 00010020 — CSIC reading/writing error
SERVICE REQ — 00010023 — RTC analyzing error
SERVICE REQ — 00010026 — RTC communication error
SERVICE REQ — 00010027 — Pressure pump micro air-leak error
SERVICE REQ — 00010028 — Head error
SERVICE REQ — 0001002A — CR ASIC ECU error
SERVICE REQ — 0001002D — The Cleaning Unit reached its end of life.
SERVICE REQ — 00010035 — Pump phase detection error
SERVICE REQ — 00010036 — Type-B board installation error
SERVICE REQ — 00010037 — Head thermistor error
SERVICE REQ — 00010038 — Transistor thermistor error
SERVICE REQ — 0001003E — Pressure Sensor failure
SERVICE REQ — 0001003F — The Pressure Motor reached its end of life.
SERVICE REQ — 00010040 — Printing position error
SERVICE REQ — 00020000 — NVRAM error
SERVICE REQ — 00020002 — SDRAM error
SERVICE REQ — 00020003 — Boot program sum error
SERVICE REQ — 0002000A — Program load error
SERVICE REQ — 0002000B — The internal memory is insufficient.
SERVICE REQ — 0Dxxxxxx — An error code for debugging
SERVICE REQ — 0Exxxxxx — A time-lag of the RTC timer
SERVICE REQ — 100000E0 — CPU address error (load)
SERVICE REQ — 10000100 — CPU address error (store)
SERVICE REQ — 10000180 — CPU reserved command code exception error
SERVICE REQ — 100001A0 — CPU slot undefined command exception error
SERVICE REQ — 100001C0 — The AC power is shut off.
SERVICE REQ — 100005C0 — CPU DMA address error
SERVICE REQ — 10000xxx — CPU error

Epson 4900 4910 Error Codes

Maintenance Request Errors
MAINTENANCE REQ — 0002 — The CR scan pass counter has come near the specified life.
MAINTENANCE REQ — 0008 — The RTC backup battery becomes exhausted
MAINTENANCE REQ — 0010 — Communication with the AID Board is not established.
MAINTENANCE REQ — 0040 — The pump counter has come near the specified life.
MAINTENANCE REQ — 0080 — The date has not been set
MAINTENANCE REQ — 0800 — Cartridge holder diaphragm near end of life
MAINTENANCE REQ — 1000 — Ink Selector near end of life
MAINTENANCE REQ — 4000 — It detects twice in a row that all the nozzles are clogging.
MAINTENANCE REQ — 0088 — The RTC backup battery becomes exhausted and the date has not been set.

Service Request Errors
SERVICE REQ — 1101 — CR life error
SERVICE REQ — 1125 — CR HP detection error
SERVICE REQ — 1138 — Over current error
SERVICE REQ — 113A — Overload error
SERVICE REQ — 113B — Over speed error
SERVICE REQ — 113C — Reversing error
SERVICE REQ — 113D — Driving time-out error
SERVICE REQ — 113E — Velocity deviation error
SERVICE REQ — 113F — Lock error
SERVICE REQ — 122A — Overload error
SERVICE REQ — 122B — Over speed error
SERVICE REQ — 122C — Reversing error
SERVICE REQ — 122D — Driving time-out error
SERVICE REQ — 122E — Velocity deviation error
SERVICE REQ — 122F — Lock error
SERVICE REQ — 131B — Head driver (transmission gate) overheat error
SERVICE REQ — 1412 — Motor Life Error
SERVICE REQ — 141A — Overload error
SERVICE REQ — 141B — Over speed error
SERVICE REQ — 141C — Reversing error
SERVICE REQ — 141D — Driving time-out error
SERVICE REQ — 141E — Velocity deviation error
SERVICE REQ — 141F — Lock error
SERVICE REQ — 1431 — Ink selector life error
SERVICE REQ — 1432 — IC Holder life error
SERVICE REQ — 1433 — IS Unit position sensor error
SERVICE REQ — 1494 — Ink selector error
SERVICE REQ — 1496 — Ink selector sensor error detection
SERVICE REQ — 1497 — Switching time-out error
SERVICE REQ — 149D — Driving time-out error
SERVICE REQ — 150C — PG phase detection error
SERVICE REQ — 151A — Overload error
SERVICE REQ — 151B — Over speed error
SERVICE REQ — 151C — Reversing error
SERVICE REQ — 151D — Driving time-out error
SERVICE REQ — 151E — Velocity deviation error
SERVICE REQ — 151F — Lock error
SERVICE REQ — 1520 — Roll feed motor lock retry error
SERVICE REQ — 1521 — Roll feed sensor detect error
SERVICE REQ — 1523 — Roll sensor error
SERVICE REQ — 151A — Overload error
SERVICE REQ — 151B — Over speed error
SERVICE REQ — 151C — Reversing error
SERVICE REQ — 152D — Driving time-out error
SERVICE REQ — 152E — Velocity deviation error
SERVICE REQ — 152F — Lock error
SERVICE REQ — 1530 — HP detection error
SERVICE REQ — 1531 — Release Sensor error
SERVICE REQ — 153A — Overload error
SERVICE REQ — 153B — Over speed error
SERVICE REQ — 153C — Reversing error
SERVICE REQ — 153D — Driving time-out error
SERVICE REQ — 153E — Velocity deviation error
SERVICE REQ — 153F — Lock error
SERVICE REQ — 1540 — Cutter HP detection error
SERVICE REQ — 1541 — Cutter return error
SERVICE REQ — 1549 — Motor disconnection error
SERVICE REQ — 154A — Overload error
SERVICE REQ — 154B — Cutter Motor over speed error
SERVICE REQ — 154C — Cutter Motor reversing error
SERVICE REQ — 154D — Driving time-out error
SERVICE REQ — 154E — Velocity deviation error
SERVICE REQ — 154F — Lock error
SERVICE REQ — 1551 — Paper thickness determining error
SERVICE REQ — 155A — DCP Motor overload error
SERVICE REQ — 155B — DCP Motor over speed error
SERVICE REQ — 155C — DCP Motor reversing error
SERVICE REQ — 155D — DCP Motor driving time-out error
SERVICE REQ — 155E — DCP Motor velocity deviation error
SERVICE REQ — 155F — DCP Motor lock error
SERVICE REQ — 1561 — Paper thickness at power-on error
SERVICE REQ — 1562 — ASF Motor abnormal load detection error
SERVICE REQ — 156A — ASF Motor overload error
SERVICE REQ — 156B — ASF Motor over speed error
SERVICE REQ — 156C — ASF Motor reversing error
SERVICE REQ — 156D — ASF Motor driving time-out error
SERVICE REQ — 156E — ASF Motor velocity deviation error
SERVICE REQ — 156F — ASF Motor lock error
SERVICE REQ — 1571 — ASF Retard Roller Sensor operation error
SERVICE REQ — 1572 — ASF Pickup Roller operation error
SERVICE REQ — 1573 — ASF Assist Roller operation error
SERVICE REQ — 157A — ASF Sub Motor overload error
SERVICE REQ — 157B — ASF Sub Motor over speed error
SERVICE REQ — 157C — ASF Sub Motor reversing error
SERVICE REQ — 157D — ASF Sub Motor driving time-out error
SERVICE REQ — 157E — ASF Sub Motor velocity deviation error
SERVICE REQ — 157F — ASF Sub Motor lock error
SERVICE REQ — 1581 — Paper eject position error
SERVICE REQ — 1582 — ASF Edge Guide open/close error
SERVICE REQ — 158A — EG Motor overload error
SERVICE REQ — 158B — EG Motor over speed error
SERVICE REQ — 158C — EG Motor reversing error
SERVICE REQ — 158D — EG Motor driving time-out error
SERVICE REQ — 158E — EG Motor velocity deviation error
SERVICE REQ — 158F — EG Motor lock error
SERVICE REQ — 159A — ATC Motor overload error
SERVICE REQ — 159B — ATC Motor over speed error
SERVICE REQ — 159C — ATC Motor reversing error
SERVICE REQ — 159D — ATC Motor driving time-out error
SERVICE REQ — 159E — ATC Motor velocity deviation error
SERVICE REQ — 159F — ATC Motor lock error
SERVICE REQ — 1801 — AID voltage error
SERVICE REQ — 1A23 — Incorrect RTC data error
SERVICE REQ — 1A26 — RTC Access T/O error
SERVICE REQ — 1A37 — Thermistor error
SERVICE REQ — 1A38 — Transistor environmental temperature error
SERVICE REQ — 1A39 — Head error
SERVICE REQ — 1A41 — Head rank ID input error
SERVICE REQ — 1A50 — I2C communication error (Between elements on ASIC and MAIN)
SERVICE REQ — 1A51 — I2C communication error (Between elements on SUB and MAIN)
SERVICE REQ — 1ABx — Main Board communication error
SERVICE REQ — 1Fxx — ILS error (1)
SERVICE REQ — 2000 — NVRAM error
SERVICE REQ — 2002 — SDRAM error
SERVICE REQ — 2003 — FLASH BOOT SUM CHECK error
SERVICE REQ — 200A — F/W load error
SERVICE REQ — 200D — System interrupt watchdog time-out error

SpectroProofer Errors
01 — SpectroProofer uninstallation error
02 — Paper Eject Support uninstallation error
13 — Foreign material detection error in paper pressing
14 — Paper pressing origin position detection failure error
15 — CR HP Sensor no detection error
16 — Paper pressing system abnormal measurement value error
65 — Drying Fan lock detection error
80 — ILS calibration error
D5 — CR related drive error
D6 — Paper pressing related operating error

Epson 4xx0 Error Codes

Maintenance Requests Errors
MAINTENANCE REQ — 0002 — The number of CR movement cycles has reached predetermined value
MAINTENANCE REQ — 0008 — RTC backup battery shut off
MAINTENANCE REQ — 0040 — Pump counter has reached predetermined amount.
MAINTENANCE REQ — 0080 — Date is not set
MAINTENANCE REQ — 0088 — RTC backup battery is not installed.
MAINTENANCE REQ — 0100 — RTC backup battery pressure is temporally low.
MAINTENANCE REQ — 0200 — The number of ASF paper feeding has reached predetermined value.

Service Request Errors
SERVICE REQ — 00000101 — CR Motor life
SERVICE REQ — 00010000 — PF Motor Encoder check error
SERVICE REQ — 00010001 — PF Motor out of step
SERVICE REQ — 00010002 — PF Motor over current
SERVICE REQ — 00010003 — PF Motor in-position time-out
SERVICE REQ — 00010004 — CR Motor Encoder check error
SERVICE REQ — 00010005 — CR Motor out of step
SERVICE REQ — 00010006 — CR Motor over current
SERVICE REQ — 00010007 — CR Motor in-position time-out
SERVICE REQ — 00010008 — Servo interrupt watchdog time-out
SERVICE REQ — 00010009 — System interrupt watchdog time-out
SERVICE REQ — 0001000A — CR axis detection error
SERVICE REQ — 0001000C — PG axis detection error
SERVICE REQ — 0001000F — CR Motor PWM output faulty
SERVICE REQ — 00010010 — PF Motor PWM output faulty
SERVICE REQ — 00010012 — CR overload (high sensitivity) error
SERVICE REQ — 00010013 — PR overload (high sensitivity) error
SERVICE REQ — 0001001B — Head driver (TG) temperature error
SERVICE REQ — 0001001D — CR servo parameter error
SERVICE REQ — 0001001E — PF servo parameter error
SERVICE REQ — 00010020 — CSIC reed/right error
SERVICE REQ — 00010022 — Ink type error (setting on printer body side)
SERVICE REQ — 00010023 — RTC analysis error
SERVICE REQ — 00010025 — CSIC ROM communication error
SERVICE REQ — 00010026 — RTC communication error
SERVICE REQ — 00010028 — Head error
SERVICE REQ — 00010029 — Unidentified NMI
SERVICE REQ — 0001002A — CR ASIC ECU error
SERVICE REQ — 0001002B — PF ASIC ECU error
SERVICE REQ — 0001002D — Cleaning Unit work life error
SERVICE REQ — 0001002F — 360 DPI writing time out error
SERVICE REQ — 00010030 — Multi Sensor failure
SERVICE REQ — 00010031 — ASF phase detection error
SERVICE REQ — 00010032 — ASF drive switch error
SERVICE REQ — 00010033 — Eject phase detection error
SERVICE REQ — 00010034 — Eject movement error
SERVICE REQ — 00010035 — Pump phase detection error
SERVICE REQ — 00010036 — Type-B board installation error
SERVICE REQ — 00010037 — Head thermistor error
SERVICE REQ — 00010038 — Transistor thermistor error
SERVICE REQ — 00010039 — PG adjustment value incorrect overwrite error
SERVICE REQ — 0001003A — PG adjustment value outside range error
SERVICE REQ — 0001003B — Cutter installation error 1
SERVICE REQ — 0001003C — Cutter installation error 2
SERVICE REQ — 0001003D — Cutter installation error 3
SERVICE REQ — 00020000 — NVRAM error
SERVICE REQ — 00020002 — SDRAM error
SERVICE REQ — 00020003 — BOOT program SUM error
SERVICE REQ — 00020009 — Flash memory SUM error
SERVICE REQ — 0002000A — Program load error
SERVICE REQ — 0002000B — Internal memory shortage error
SERVICE REQ — 100000E0 — CPU address error (load misalignment)
SERVICE REQ — 10000100 — CPU address error (storage misalignment)
SERVICE REQ — 10000180 — CPU reserve command code exception error
SERVICE REQ — 100001A0 — CPU slot illegal command exception error
SERVICE REQ — 100001C0 — AC disruption
SERVICE REQ — 100005C0 — CPU DMA address error
SERVICE REQ — 10000xxx — CPU error
SERVICE REQ — 0003xxxx — Debug error code
SERVICE REQ — 0Dxxxxxx — Debug error code
SERVICE REQ — 0Exxxxxx — RTC timer off error

Epson 4000 Error Codes

Maintenance Requests Errors
MAINTENANCE REQ — 0002 — The number of CR movement cycles has reached predetermined value
MAINTENANCE REQ — 0008 — RTC backup battery shut off
MAINTENANCE REQ — 0040 — Pump counter has reached predetermined amount.
MAINTENANCE REQ — 0080 — Date is not set
MAINTENANCE REQ — 0088 — RTC backup battery is not installed.
MAINTENANCE REQ — 0100 — RTC backup battery pressure is temporally low.
MAINTENANCE REQ — 0200 — The number of ASF paper feeding has reached predetermined value.

Service Request Errors
SERVICE REQ — 00000101 — CR Motor life
SERVICE REQ — 00010000 — PF Motor Encoder check error
SERVICE REQ — 00010001 — PF Motor out of step
SERVICE REQ — 00010002 — PF Motor over current
SERVICE REQ — 00010003 — PF Motor in-position time-out
SERVICE REQ — 00010004 — CR Motor Encoder check error
SERVICE REQ — 00010005 — CR Motor out of step
SERVICE REQ — 00010006 — CR Motor over current
SERVICE REQ — 00010007 — CR Motor in-position time-out
SERVICE REQ — 00010008 — Servo interrupt watchdog time-out
SERVICE REQ — 00010009 — System interrupt watchdog time-out
SERVICE REQ — 0001000A — CR axis detection error
SERVICE REQ — 0001000C — PG axis detection error
SERVICE REQ — 0001000F — CR Motor PWM output faulty
SERVICE REQ — 00010010 — PF Motor PWM output faulty
SERVICE REQ — 0001001B — Head driver (TG) temperature error
SERVICE REQ — 0001001D — CR servo parameter error
SERVICE REQ — 0001001E — PF servo parameter error
SERVICE REQ — 00010020 — CSIC reed/right error
SERVICE REQ — 00010022 — Ink type error (setting on printer body side)
SERVICE REQ — 00010023 — RTC analysis error
SERVICE REQ — 00010025 — CSIC ROM communication error
SERVICE REQ — 00010026 — RTC communication error
SERVICE REQ — 00010028 — Head error
SERVICE REQ — 00010029 — Unidentified NMI
SERVICE REQ — 00001002A — CR ASIC ECU error
SERVICE REQ — 0001002B — PF ASIC ECU error
SERVICE REQ — 0001002D — Cleaning Unit work life error
SERVICE REQ — 0001002F — 360 DPI writing time out error
SERVICE REQ — 00010030 — Multi Sensor failure
SERVICE REQ — 00010031 — ASF phase detection error
SERVICE REQ — 00010032 — ASF drive switch error
SERVICE REQ — 00010033 — Eject phase detection error
SERVICE REQ — 00010034 — Eject movement error
SERVICE REQ — 00010035 — Pump phase detection error
SERVICE REQ — 00010036 — Type-B board installation error
SERVICE REQ — 00010037 — Head thermistor error
SERVICE REQ — 00010038 — Transistor thermistor error
SERVICE REQ — 00010039 — PG adjustment value incorrect overwrite error
SERVICE REQ — 0001003A — PG adjustment value outside range error
SERVICE REQ — 0001003B — Cutter installation error 1
SERVICE REQ — 0001003C — Cutter installation error 2
SERVICE REQ — 0001003D — Cutter installation error 3
SERVICE REQ — 00020000 — NVRAM error
SERVICE REQ — 00020002 — SDRAM error
SERVICE REQ — 00020003 — BOOT program SUM error
SERVICE REQ — 00020009 — Flash memory SUM error
SERVICE REQ — 0002000A — Program load error
SERVICE REQ — 0002000B — Internal memory shortage error
SERVICE REQ — 100000E0 — CPU address error (load misalignment)
SERVICE REQ — 10000100 — CPU address error (storage misalignment)
SERVICE REQ — 10000180 — CPU reserve command code exception error
SERVICE REQ — 100001A0 — CPU slot illegal command exception error
SERVICE REQ — 100001C0 — AC disruption
SERVICE REQ — 100005C0 — CPU DMA address error
SERVICE REQ — 10000xxx — CPU error
SERVICE REQ — 0003xxxx — Debug error code
SERVICE REQ — 0Dxxxxxx — Debug error code

Epson 10000 10600 Error Codes

Maintenance Requests Errors
MAINTENANCE REQ — 0100 — Indicates small quantity of remaining waste ink material absorption.
MAINTENANCE REQ — 0101 — The CR motor reached the 3% remaining to the life.
MAINTENANCE REQ — 0102 — Auto nozzle check error
MAINTENANCE REQ — 0103 — Backup battery for RTC (real time clock) life expired.
MAINTENANCE REQ — 0104 — Dot missing detector error

Service Request Errors
SERVICE REQ — 00000100 — Waste ink pads are full
SERVICE REQ — 00000101 — CR motor life (Ink tubes also reached their life)
SERVICE REQ — 00000102 — Nozzle check error compulsory continuity
SERVICE REQ — 00000103 — RTC backup battery end
SERVICE REQ — 00000104 — Auto print head optimization system
SERVICE REQ — 00000105 — Head unit life end
SERVICE REQ — 00000106 — Cleaning unit life end
SERVICE REQ — 00010000 — PF motor/ encoder check error
SERVICE REQ — 00010001 — PF motor step-out
SERVICE REQ — 00010002 — PF motor/overcurrent
SERVICE REQ — 00010003 — PF motor/ in position time-out error
SERVICE REQ — 00010004 — CR motor/ encoder check error
SERVICE REQ — 00010005 — CR motor step-out
SERVICE REQ — 00010006 — CR motor/overcurrent
SERVICE REQ — 00010007 — CR motor/ in position time-out error
SERVICE REQ — 00010008 — Servo interruption watch dog time out error
SERVICE REQ — 00010009 — System interruption watch dog time out error
SERVICE REQ — 0001000A — CR origin sensor mulfanction
SERVICE REQ — 0001000B — PF origin sensor mulfanction
SERVICE REQ — 0001000C — HS origin sensor mulfanction
SERVICE REQ — 0001000D — Cover sensor mulfanction
SERVICE REQ — 0001000E — Cover sensor mulfanction
SERVICE REQ — 0001000F — CR motor over heat (PWM output malfunction)
SERVICE REQ — 00010010 — PF motor over heat (PWM output malfunction)
SERVICE REQ — 00010011 — Paper jam error
SERVICE REQ — 00010012 — Cap origin error
SERVICE REQ — 00010013 — Providing system origin error
SERVICE REQ — 00010014 — Pressurization error
SERVICE REQ — 00010015 — Liquid sensor overflow (K)
SERVICE REQ — 00010016 — Liquid sensor overflow©
SERVICE REQ — 00010017 — Liquid sensor overflow (M)
SERVICE REQ — 00010018 — Liquid sensor overflow (LC)
SERVICE REQ — 00010019 — Liquid sensor overflow (LM)
SERVICE REQ — 0001001A — Liquid sensor overflow (Y)
SERVICE REQ — 0001001B — Head driver (TG) temperature error
SERVICE REQ — 0001001C — FS origin (Suction fan shutter home position) error
SERVICE REQ — 0001001D — CR servo parameter error
SERVICE REQ — 0001001E — PF servo parameter error
SERVICE REQ — 00010020 — CSIC card read/write error
SERVICE REQ — 00010021 — Starter cartridge error
SERVICE REQ — 00010022 I- nk type NVRAM status error
SERVICE REQ — 00010023 — RTC operation malfunction
SERVICE REQ — 00010024 — Module communication time-out error
SERVICE REQ — 00010025 — CSIC EEROR access error
SERVICE REQ — 00010026 — RTC access error
SERVICE REQ — 00010027 — Pressure pump small leak error
SERVICE REQ — 00010028 — During cleaning, pressure pump small leak error
SERVICE REQ — 00020000 — NVRAM error
SERVICE REQ — 00020001 — NVRAM check sum error
SERVICE REQ — 00020002 — SDRAM error
SERVICE REQ — 00020003 — Flash memory sum error
SERVICE REQ — 00020004 — ASIC illegal version error
SERVICE REQ — 00020005 — Firmware ASIC mismatching error (Version:A)
SERVICE REQ — 00020006 — Firmware ASIC mismatching error (Version:B)
SERVICE REQ — 00020007 — Head/ASIC mismatch error
SERVICE REQ — 00020009 — Flash memory check sum error
SERVICE REQ — 0002000B — Memory insufficient error
SERVICE REQ — 0002000C — Review error
SERVICE REQ — 00030000 — 00030013 — Debug error
SERVICE REQ — 00030015 — Ink supply defective (K)
SERVICE REQ — 00030016 — Ink supply defective ©
SERVICE REQ — 00030017 — Ink supply defective (M)
SERVICE REQ — 00030018 — Ink supply defective (LC)
SERVICE REQ — 00030019 — Ink supply defective (LM)
SERVICE REQ — 0003001A — Ink supply defective (Y)
SERVICE REQ — 0003001B — GAP adjustment range error
SERVICE REQ — 0003001C — Timeout in case of no print finishing with ASIC
SERVICE REQ — D0120013 — Module comminication error
SERVICE REQ — D012001E — Engine side ASIC command transmission over flow
SERVICE REQ — D012001F — Engine side ASIC command receiption over error
SERVICE REQ — D0xxxxxx — Program error
SERVICE REQ — 10000E0 — CPU address error
SERVICE REQ — 1000100 — CPU address error
SERVICE REQ — 10000180 — CPU reservation instruction code exception error
SERVICE REQ — 100001A0 — CPU Slot unfair command exception error
SERVICE REQ — 100005C0 — CPU DMA address error
SERVICE REQ — 10000xxx — CPU illegal trap
SERVICE REQ — FFFFxxxx — OS kernel detection error

Источник

See the list of available servcie call Error codes.

Epson 9800 Error Codes

0002 — Carriage Motor / Ink Tube is near end of life (Clear Carriage Motor Counter)

0004 — Nozzle check error

0008 — RTC error (Real Time Clock) (Check the Battery and reset the Date and Time)

0020 — Print Head life counter (Reset the Head counter)

0040 — Cleaning Unit near end of life (Reset When Cleaning Unit Change)(Pump Assy, Pump Motor, Cap Assy, Wiper Blade, Flushing Box).

0080 — Date is not set (Set the date and time (RTC))

0100 — RTC Battery low (Replace the battery, and reset the RTC)

0400 — Pressure Pump Assembly near end of life (Reset When Pump Unit Change) Inspect and replace if necessary.

00000088 — RTC (Real Time Clock) data is corrupted

00000101 — Carriage Motor life (Reset When CR Unit Change), check for leaky ink tubes)

00000103 — RTC (Real Time Clock) battery is defective

00000105 — Print Head end of life (Inspect print head and reset head counter)

00010000 — Paper Feed Motor encoder check error (Check Sensor and Timing Disk)

00010001 — Paper Feed Motor out of step

00010002 — Paper Feed Motor overcurrent (Check for mechanical binding of the feed rollers / motor)

00010003 — Paper Feed Motor in-position time-out

00010004 — Carriage Motor encoder check error (Check sensor and Timing Disk)

00010005 — Carriage Motor out of step

00010006 — Carriage Motor overcurrent (Check for mechanical binding, If not replace motor)

00010007 — Carriage Motor in-position time-out

00010008 — Servo interrupt watchdog time-out

00010009 — System interrupt watchdog time-out

0001000A — Carriage home position error (Check Sensor and mechanical components)

0001000C — Platen Gap home position error (Check Sensor and mechanical components)

0001000F — Carriage Motor PWM output faulty

00010010 — Paper Feed Motor PWM output faulty

00010014 — Ink System Pressurization Error (The Pressure Sensor does not indicate pressure)

0001001B — Head driver (TG) temperature error

0001001D — Carriage servo parameter error

0001001E — Paper feed servo parameter error

00010020 — CSIC read / write error

00010023 — RTC (Real TIme Clock) (Reset RTC)

00010025 — CSIC ROM communication error

00010026 — RTC (Real TIme Clock) communication error

00010027 — Pressure Pump Micro Leak Error (only displayed when testing in Service Mode)

00010028 — Head error

00010029 — Unidentified NMI

0001002A — Carriage ASIC ECU error

0001002B — Paper feed ASIC ECU error

0001002D — Cleaning Unit end of life (Reset When Cleaning Unit Change)(Pump Assy, Pump Motor, Cap Assy, Wiper Blade, Flushing Box).

0001002F — 360 DPI writing time out error

00010035 — Pump Home Position Error (Check Sensor and mechanical components)

00010036 — Type B Interface board installation error (Type-B Card is Level 2 or below)

00010037 — Print Head thermistor error (Print Head, Head Cable)

00010038 — Head Driver thermistor Error (Replace Main Board)

0001003B — Carriage Lock / Cutter Error

0001003C — Carriage Lock / Cutter Error

0001003D — Carriage Lock / Cutter Error

0001003E — Pressure Sensor Error (Sensor detects pressure before the pressure is generated)

0001003F — Pressure Pump Assembly end of life (Reset When Pump Unit Change) Inspect and replace if necessary.

00010040 — Printing Position Error (Caused by CR Encoder or Timing Strip)

00020000 — NVRAM error

00020002 — SDRAM error

00020003 — BOOT program SUM error

00020009 — Flash memory SUM error

0002000A — Program load error

0002000B — Internal memory shortage error

0002000C — Review error

100000E0 — CPU address error (load misalignment)

10000100 — CPU address error (storage misalignment)

10000180 — CPU reserve command code exception error

100001A0 — CPU slot illegal command exception error

100001C0 — AC disruption (AC Power) (Unplug and wait 30 sec., then plug back in) Bad Power)

100005C0 — CPU DMA address error

0003xxxxx — CPU error

0Dxxxxxxx — CPU error

C..R

EPSON Stylus Pro 4400/4450/4800/4880/4880C

Table 3-2. Service request error list(continued)

Error Code

00000101

CR Motor life

00010000

PF Motor Encoder check error

00010001

PF Motor out of step

00010002

PF Motor over current

00010003

PF Motor in-position time-out

00010004

CR Motor Encoder check error

00010005

CR Motor out of step

00010006

CR Motor over current

00010007

CR Motor in-position time-out

00010008

Servo interrupt watchdog time-out

00010009

System interrupt watchdog time-out

0001000A

CR axis detection error

0001000C

PG axis detection error

0001000F

CR Motor PWM output faulty

00010010

PF Motor PWM output faulty

00010012

CR overload (high sensitivity) error

00010013

PR overload (high sensitivity) error

0001001B

Head driver (TG) temperature error

0001001D

CR servo parameter error

0001001E

PF servo parameter error

00010020

CSIC reed/right error

00010022

Ink type error (setting on printer body side)

00010023

RTC analysis error

00010025

CSIC ROM communication error

00010026

RTC communication error

00010028

Head error

00010029

Unidentified NMI

0001002A

CR ASIC ECU error

0001002B

PF ASIC ECU error

0001002D

Cleaning Unit work life error

0001002F

360 DPI writing time out error

00010030

Multi Sensor failure

00010031

ASF phase detection error

Troubleshooting

Reference

Description

Page

p.175

p.177

p.178

p.178

p.179

p.179

p.180

p.180

p.181

p.181

p.181

p.182

p.182

p.183

p.183

p.184

p.184

p.185

p.185

p.186

p.186

p.186

p.187

p.187

p.188

p.188

p.188

p.188

p.188

p.189

p.189

p.189

p.189

Troubleshooting Based on Panel Messages

Table 3-2. Service request error list(continued)

Error Code

Description

00010032

ASF drive switch error

00010033

Eject phase detection error

00010034

Eject movement error

00010035

Pump phase detection error

00010036

Type-B board installation error

00010037

Head thermistor error

00010038

Transistor thermistor error

00010039

PG adjustment value incorrect overwrite error

0001003A

PG adjustment value outside range error

0001003B

Cutter installation error 1

0001003C

Cutter installation error 2

0001003D

Cutter installation error 3

00020000

NVRAM error

00020002

SDRAM error

00020003

BOOT program SUM error

00020009

Flash memory SUM error

0002000A

Program load error

0002000B

Internal memory shortage error

100000E0

CPU address error (load misalignment)

10000100

CPU address error (storage misalignment)

10000180

CPU reserve command code exception error

100001A0

CPU slot illegal command exception error

100001C0

AC disruption

100005C0

CPU DMA address error

10000xxx

CPU error

0003xxxx

Debug error code

0Dxxxxxx

Debug error code

0Exxxxxx

RTC timer off error

Revision C

Reference

Page

p.189

p.190

p.190

p.190

p.190

p.190

p.190

p.191

p.191

p.191

p.191

p.191

p.192

p.192

p.192

p.192

p.193

p.193

p.193

p.193

p.194

p.194

p.194

p.194

p.195

p.195

p.195

p.195

161

Epson continue to improve their printers and with every generation both quality, speed & reliability go from strength to strength but occasionally things do go wrong. When they do, the control panel will indicate the problem with a series of codes. Not all codes are trouble, some are merely service requests which will crop up depending on the printer usage. Unfortunately it isn’t an exact science as some error codes may actually mean something else related further down the mechanical line. The following codes relate to the Stylus Pro series which can all be fixed.

0002 Carriage motor / ink tube EOL

0004 Nozzle check error

0008 RTC error

0020 Print head EOL

0040 Cleaning unit EOL

0080 RTC date not set

0100 RTC battery low

0400 Pressure pump assembly EOL

00000088 RTC defective

00000100 Waste ink pad service life

00000101 CR motor / ink tubes EOL

00000103 RTC date invalid

00000105 Print head EOL

00000106 Cleaning unit EOL

00010000 PF encoder check

00010001 PF motor out of step

00010002 Over current on PF motor

00010003 PF motor out of position time out

00010004 CR encoder check

00010005 CR motor out of step

00010007 CR motor out of position time out

00010008 Servo interrupt watchdog time out

0001000A Carriage home position detection

0001000C PG home detection

00010014 Pressurising failure

0001001B Head driver TG temperature

0001001D CR servo parameter

0001001E PF servo parameter

00010020 CSIC read / write

00010023 RTC analysing

00010025 CSIC ROM communication error

00010026 RTC communication

00010027 Pressure pump micro air leak

00010028 Print head

0001002A CR ASIC ECU

0001002D Cleaning unit EOL

00010035 Pump phase detection

00010036 Type-B board installation

00010037 Head thermistor

00010038 Transistor thermistor

0001003E Pressure sensor failure

0001003F Pressure motor EOL

00010040 Printing position

00020000 NVRAM

00020002 SDRAM

00020003 Boot program sum

0002000A Program load

0002000B Internal memory insufficient

0DXXXXXX Debugging

0EXXXXXX RTC timer time lag

100000E0 CPU address (Loading misalignment)

10000100 CPU address (Storing misalignment)

10000180 CPU reserved command code exception

100001A0 CPU slot undefined command exception

100001C0 AC power shut off

100005C0 CPU DMA address

10000XXX CPU

Maintenance Tank Error

Whenever a head clean, ink charge or borderless over spray occurs the ink has to go somewhere. Unfortunately it doesn’t just disappear so any ink that doesn’t make it on to paper makes it’s way to specially designed porous pads which act like a sponge to lock in excess ink. Over time theses get full and when they do a message similar to the image on the right appears. If you are looking to purchase a replacement maintenance tank why not visit our main e-commerce site where you can order consumables direct to your door. Most of the 17″+ Stylus Pro printers use the C12C890191 maintenance tank, where as the 3800, & the 3880 use the C13T582000 maintenance cartridge, but the recently introduced 7700 & 9700 had to be different so they use the C12C890501 maintenance tank.

Maintenance Tank

Unlike the domestic inkjet printers, the Pro series is designed specifically for the high end market. With down time costing thousands of pounds a simple problem like saturated porous pads must be dealt with promptly. Replacing these in a smaller Stylus printer is no simple job; the printer needs to be completely dismantled to gain access to the pads which are normally in the bottom of the chassis. This is not the case with the newer larger printers as the porous pads are located on the sides of the printer with anywhere between one to even three on the Stylus Pro 11880 64″ wide beast. Simply pull out the container and replace it with a fresh new one.