Spl error please use the proper driver ошибка

1664, не знаю удалось ли вам прикрутить драйвер для этого МФУ, если да то поделитесь.
Я же бьюсь с ним уже второй день.

Излагаю.
Система mint 9 (сборка на ubuntu 10.04) LXDE, ядро 2.6.32-21.
Драйверы брал отсюда

Printer setting Utility (Driver) (ver.2.00.23:11) и Smart Panel (Driver) (ver.2.00.72:05) встали без проблем.

Не могу поставить Unified Driver (Driver) (ver.3.00.63:07)
Ругается так

Уже навтыкал кучу библиотек на qt (сначала ругался на отсутствие чего-то с qt не записал, а терь не помню).
Также поставил все для QGtkstyle.

Spoiler

Пробывал менять стили в qtconfig
Но результат тот же.

Через cups уже тоже пробовал, но тоже никак…
Также пробовал драйвер запустить на других сборках.

openSUSE 12.1 (x86_64)
KDE: 4.7.2 (4.7.2) «release 5»

Spoiler

На той же основе (ubuntu 10.04) ядро 2.6.32-21, только с GNOME 2.30.2

Spoiler

В общем не знаю куда копать….
Очень надеюсь на помощь.

Драйвер kubuntu samsung uld не печатается правильно на принтере samsung clp 320: белая страница с текстом «Ошибка spl-c, используйте правильный драйвер . «

Я только что установил kubuntu 19.04 на свой 32-битный ноутбук (Samsung R540).

Теперь я хотел настроить принтер, цветной лазерный принтер Samsung CLP-320, который подключен к моему маршрутизатору (кабель Ethernet) — ноутбук подключен к маршрутизатору с помощью интерфейса Wi-Fi.

В браузере я могу получить доступ к веб-интерфейсу принтера http://sec001599706e10/sws/index.html(чтобы проверить, работает ли tcp-соединение с принтером)

После этого я запустил скрипт install.sh из распакованного файла SamsungPrinterInstaller.tar.gz, загруженного отсюда:http://www.samsungsetup.com/TS/Files/RDS_XML/web_install_agent/linux/SamsungPrinterInstaller.tar.gz

Сценарий запустился без ошибок. Принтер также отображается в настройках принтера kubuntu. В настройках принтера kubuntu я вижу, что принтер найден: он правильно показывает расходные материалы принтера, например, что голубой цвет низкий, как это также показано в веб-интерфейсе принтеров.

Кажется, все в порядке.

Но теперь, когда я пытаюсь что-то напечатать, принтер просто печатает почти пустую белую страницу со следующим текстом:

Печать тестовой страницы из настроек принтера kubuntu имеет тот же эффект.

Я также попытался удалить принтер в настройках принтера kubuntu и добавил его в браузер на странице администрирования чашки:http://localhost:631/admin(о которой я читал в другом месте в Интернете) ==> без разницы

Интересно, что тот же драйвер прекрасно работает на моем другом ноутбуке, 64-битной машине (Acer aspire es1-731g-p1mc), той же операционной системе и выполняет те же действия, как описано выше. Кроме того, я установил виртуальную коробку с windows7 в качестве гостевая система на том же ноутбуке samsung (которая печатает белую страницу) и установила там драйверы принтера. красиво печатая.

Кто-нибудь может мне помочь запустить драйвер принтера на Kubuntu Linux 19.04?

Источник

Spl error please use the proper driver ошибка принтера

I am installing and setting up a Samsung Xpress M2020W printer. I have installed Samsung’s Linux software and SANE and its required supporting files using Synaptic. As far as I can tell, to this point, installation was successful. (I know nearly zero about anything Linux. I did read Terminal’s comments, though.)

Samsung’s final instructions are: . launch printing utility (system>administrator>printing) or execute «system-config-printer» in Terminal.

Problem: I can’t locate System>administrator>printing. And when I open Terminal, it doesn’t recognize the system-config-printer command.

Re: Printer setup

Is the Samsung software compatable with the Pi’s ARMHF architecture ? Can you post a download link ?

Printers are usually configured thru CUPS

Re: Printer setup

In an LXTerminal :-
sudo apt-get install system-config-printer

You will get a menu entry in Preferences/Printing.
I’m not sure, you may need to install ‘cups’ and some of its related programs.
I don’t know if there is a Pi driver for this printer.

Re: Printer setup

mad-hatter wrote: Hello,

In an LXTerminal :-
sudo apt-get install system-config-printer

You will get a menu entry in Preferences/Printing.
I’m not sure, you may need to install ‘cups’ and some of its related programs.
I don’t know if there is a Pi driver for this printer.

Re: Printer setup

Minutes after my first post, I found out about CUPS and installed. It appears to support every Samsung printer in existence except for any SLs. Mine, of course, is an SL-M2020.
I just did «sudo apt-get install system-config-printer.» No support there, so I tried the available search function. Search function never comes up with any result.

I manually installed the driver, but that has zero effect.

Re: Printer setup

Is this your printer is it wireless enabled model ?

If it is wireless and it supports Samsung Mobile Print then use Google Cloud Print, it must be on same home network as Pi

I have a HP ePrinter which is WiFi and just print to PDF then upload PDF to the the Google Cloud Print Web Page for printing

Re: Printer setup

Problem partially solved:
Originally I installed the Samsung driver before I installed CUPS and did system-config-printer. So, I installed the driver again, and now my printer is detected.

Won’t print, related to «/user/lib/cups/filter/rastertospl» not available: No such file or directory.» It’s one thing after another. Brand new printer incompatible with Raspberry.

Thank you for your posts.

Re: Printer setup

As stupid as I feel now, I have to admit that I have also bought this printer (sort of, I have the M2022W) and now experience the same problem.
I can´t get it to print other then the test print through the cups printers tab.
On the test print it says the following:

SPL ERROR — Please use the proper driver

POSITION : 0X0 (0)

VERSION : SPL 5.73.04 06-10-2014

ERROR CODE : 11-1113

My question is, has anyone fixed the problem yet or should I start looking for the receipt?

I hope that someone can help me with this problem cause this is a really good printer for the purpose that I have in mind for it.

Re: Printer setup

pi_nander wrote: Hi guys,

As stupid as I feel now, I have to admit that I have also bought this printer (sort of, I have the M2022W) and now experience the same problem.
I can´t get it to print other then the test print through the cups printers tab.
On the test print it says the following:

SPL ERROR — Please use the proper driver

POSITION : 0X0 (0)

VERSION : SPL 5.73.04 06-10-2014

ERROR CODE : 11-1113

My question is, has anyone fixed the problem yet or should I start looking for the receipt?

I hope that someone can help me with this problem cause this is a really good printer for the purpose that I have in mind for it.

As this is a Wireless Cloud Printer

It can be used standalone ie Wireless to your Broadband Wireless Router, the Printer can be set up without connecting to a PC

Therefore you can use Google Cloud Print which takes the pain away from trying to find drivers

You may have to install IceWeasel (Firefox) Web Browser in Raspbian to access the Goole Cloud Print web site

Re: Printer setup

Re: Printer setup

Ok first of all, thanks alot for the quick reply´s. I was already looking for another printer but now I have hope for using this one.

After having looked through the Noach/shared/PPD map I have found the exact driver needed for my printer (M2020 series).
So I deleted my former printer setting (instead of modifying it) and reinstalled it using the right PPD file.
As happy as I was about finally being able to install the right driver, I found myself disappointed when the test page wouldnt even print. It just says state: stopped and nothing else.

I do think that it is now a simple matter of configuring instead of the entire trouble of finding the right driver.
Any ideas what the problem could be?
I´ll have to add though, I am still an incredible noob with the raspberry pi, linux and coding of any form BUT eager to learn.

ps.- I tried adding a screenshot but couldnt get the size of the screenshot below 64kib without making it unreadable.

Re: Printer setup

pi_nander wrote: Ok first of all, thanks alot for the quick reply´s. I was already looking for another printer but now I have hope for using this one.

After having looked through the Noach/shared/PPD map I have found the exact driver needed for my printer (M2020 series).
So I deleted my former printer setting (instead of modifying it) and reinstalled it using the right PPD file.
As happy as I was about finally being able to install the right driver, I found myself disappointed when the test page wouldnt even print. It just says state: stopped and nothing else.

I do think that it is now a simple matter of configuring instead of the entire trouble of finding the right driver.
Any ideas what the problem could be?
I´ll have to add though, I am still an incredible noob with the raspberry pi, linux and coding of any form BUT eager to learn.

ps.- I tried adding a screenshot but couldnt get the size of the screenshot below 64kib without making it unreadable.

The issue is that Samsung write/compile/test etc on Linux x86 systems, do they even care about ARM drivers ? likely not a high priority as most ARM Devices are Phones/Tablets which can use Air Print/Google Cloud Print.

I personally gave up and use Google Clous Print

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

Samsung ML-1865

Samsung ML-1865

Post by handers » Sat Jul 07, 2012 5:46 am

Can anyone guide me through the process of setting up this printer (samsung ml-1865)

I keep getting this printed «internal error»: please use proper driver . position 0x0 (0) . system h6fw_5.49/xl_op . line 180 . version SPL 5.49 10-20-2010 (so the usb-connection is properly recognised, and something is actually printed)

I found a tutorial in Spanish, which did not work out for me using Google translate, and found several suggestions on Ubuntu forums, none of which i’ve been able to make work (but that may have polluted the code) — I have tried the Samsung unified driver, alas to no avail — that is most likely due to my inexperience with Linux — I’m a newbie!

Re: Samsung ML-1865

Post by 442 » Sun Jul 08, 2012 2:02 pm

Re: Samsung ML-1865

Post by 442 » Sun Aug 05, 2012 5:08 pm

Samsung Printer Journey
2012/06/29 in Blog by Ferdinand Thommes | No comments
I bought a nice and small Samsung ML 1675 Laserprinter not long ago. It is supposed to work with the Samsung Unified Linux Driver. So I googled and went to the Samsung Website and downloaded the driver and installed it. That did not bring the printer to life. The cups interface did not even see the printer anymore. I left things as they were, as it was late. The next morning my dist-upgrade was blocked by strange errors that proved to be from the Samsung mfp-driver. Removing the lot fixed the problems. So, do not install the drivers from the Samsung website, they do not work.

So I dug a bit deeper in Google and found The Samsung Unified Linux Driver Repository.

Here are the steps to get any printer / multidevice, that needs to use this driver, working in no time at all:

open a shell and become root:

root@siductionbox: cd /etc/apt/sources.list.d [ENTER]

root@siductionbox:/etc/apt/sources.list.d# touch Samsung_Printer.list && echo deb http://www.bchemnet.com/suldr/ debian extra > Samsung_Printer.list && wget -O — http://www.bchemnet.com/suldr/suldr.gpg | apt-key add – && apt-get update [ENTER]

This will set up the needed repository and install the gpg-key for it. Now you want to install the drivers:

apt-get install samsungmfp-data samsungmfp-configurator-qt4 samsungmfp-configurator-data samsungmfp-driver samsungmfp-driver-4.00.35 printer-driver-splix

That will install the needed drivers for just the printer. If that is all you need, turn on your printer and enjoy.

If you have a multi-device that can also scan, you need some more software. As with siduction, the user is already a member of group ‘lp’. there is no need for action here. Should you use a different distribution, check this by issuing, as user:

devil lp dialout cdrom floppy audio dip video plugdev users fuse scanner netdev

If lp is present, you just need to install some extra packages on top of the above:

apt-get install samsungmfp-scanner samsungmfp-scanner-sane-fix samsungmfp-scanner-sane-fix-multiarch

NOTE: before installing the latter 2 packages, read the output of apt-cache show

Источник

unixforum.org

Форум для пользователей UNIX-подобных систем

• Темы без ответов
• Активные темы
• Поиск
• Статус форума

Решено: МФУ Samsung SCX-4623

Решено: МФУ Samsung SCX-4623

Сообщение 1664 » 02.06.2010 23:08

Re: Решено: МФУ Samsung SCX-4623

Сообщение shau-kote » 03.06.2010 00:17

Re: Решено: МФУ Samsung SCX-4623

Сообщение sash-kan » 03.06.2010 02:22

Re: Решено: МФУ Samsung SCX-4623

Сообщение 1664 » 04.06.2010 07:13

Re: Решено: МФУ Samsung SCX-4623

Сообщение sash-kan » 04.06.2010 12:21

Re: Решено: МФУ Samsung SCX-4623

Сообщение 1664 » 04.06.2010 19:01

Re: Решено: МФУ Samsung SCX-4623

Сообщение vzvl » 07.02.2012 20:42

1664, не знаю удалось ли вам прикрутить драйвер для этого МФУ, если да то поделитесь.
Я же бьюсь с ним уже второй день.

Излагаю.
Система mint 9 (сборка на ubuntu 10.04) LXDE, ядро 2.6.32-21.
Драйверы брал отсюда

Printer setting Utility (Driver) (ver.2.00.23:11) и Smart Panel (Driver) (ver.2.00.72:05) встали без проблем.

Не могу поставить Unified Driver (Driver) (ver.3.00.63:07)
Ругается так

Уже навтыкал кучу библиотек на qt (сначала ругался на отсутствие чего-то с qt не записал, а терь не помню).
Также поставил все для QGtkstyle.
Spoiler

Через cups уже тоже пробовал, но тоже никак.
Также пробовал драйвер запустить на других сборках.

openSUSE 12.1 (x86_64)
KDE: 4.7.2 (4.7.2) «release 5»
Spoiler

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

Samsung ML-1865

Samsung ML-1865

Post by handers » Sat Jul 07, 2012 5:46 am

Can anyone guide me through the process of setting up this printer (samsung ml-1865)

I keep getting this printed «internal error»: please use proper driver . position 0x0 (0) . system h6fw_5.49/xl_op . line 180 . version SPL 5.49 10-20-2010 (so the usb-connection is properly recognised, and something is actually printed)

I found a tutorial in Spanish, which did not work out for me using Google translate, and found several suggestions on Ubuntu forums, none of which i’ve been able to make work (but that may have polluted the code) — I have tried the Samsung unified driver, alas to no avail — that is most likely due to my inexperience with Linux — I’m a newbie!

Re: Samsung ML-1865

Post by 442 » Sun Jul 08, 2012 2:02 pm

Re: Samsung ML-1865

Post by 442 » Sun Aug 05, 2012 5:08 pm

Samsung Printer Journey
2012/06/29 in Blog by Ferdinand Thommes | No comments
I bought a nice and small Samsung ML 1675 Laserprinter not long ago. It is supposed to work with the Samsung Unified Linux Driver. So I googled and went to the Samsung Website and downloaded the driver and installed it. That did not bring the printer to life. The cups interface did not even see the printer anymore. I left things as they were, as it was late. The next morning my dist-upgrade was blocked by strange errors that proved to be from the Samsung mfp-driver. Removing the lot fixed the problems. So, do not install the drivers from the Samsung website, they do not work.

So I dug a bit deeper in Google and found The Samsung Unified Linux Driver Repository.

Here are the steps to get any printer / multidevice, that needs to use this driver, working in no time at all:

open a shell and become root:

root@siductionbox: cd /etc/apt/sources.list.d [ENTER]

root@siductionbox:/etc/apt/sources.list.d# touch Samsung_Printer.list && echo deb http://www.bchemnet.com/suldr/ debian extra > Samsung_Printer.list && wget -O — http://www.bchemnet.com/suldr/suldr.gpg | apt-key add – && apt-get update [ENTER]

This will set up the needed repository and install the gpg-key for it. Now you want to install the drivers:

apt-get install samsungmfp-data samsungmfp-configurator-qt4 samsungmfp-configurator-data samsungmfp-driver samsungmfp-driver-4.00.35 printer-driver-splix

That will install the needed drivers for just the printer. If that is all you need, turn on your printer and enjoy.

If you have a multi-device that can also scan, you need some more software. As with siduction, the user is already a member of group ‘lp’. there is no need for action here. Should you use a different distribution, check this by issuing, as user:

devil lp dialout cdrom floppy audio dip video plugdev users fuse scanner netdev

If lp is present, you just need to install some extra packages on top of the above:

apt-get install samsungmfp-scanner samsungmfp-scanner-sane-fix samsungmfp-scanner-sane-fix-multiarch

NOTE: before installing the latter 2 packages, read the output of apt-cache show

Источник

Code: Select all

+  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       _scanner._tcp        local
+  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       UNIX Printer         local
+  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       PDL Printer          local
+  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       Internet Printer     local
+  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       Web Site             local
=  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       Web Site             local
   hostname = [XRX9C934E46E066.local]
   address = [192.168.0.16]
   port = [80]
   txt = []
=  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       Internet Printer     local
   hostname = [XRX9C934E46E066.local]
   address = [192.168.0.16]
   port = [631]
   txt = ["Staple=F" "Sort=F" "Fax=T" "Scan=T" "Punch=0" "PaperMax=legal-A4" "PaperCustom=T" "Duplex=F" "Copies=T" "Color=F" "Collate=F" "Bind=F" "URF=W8,RS600,IS1,CP1,IFU0,PQ4,OB10,V1.3" "kind=document,envelope,label" "UUID=16a65700-007c-1000-bb49-9c934e46e066" "MDL=WorkCentre 3215" "MFG=Xerox" "usb_CMD=MFG:Xerox;CMD:SPL,PCL6,POSTSCRIPT,URF,FAX,FWV,EXT;MDL:WorkCentre 3215;CLS:PRINTER;CID:XR_PCL6_Basic_Mono;MODE:FAX3,SCN,SPL3,R000105;" "usb_MDL=WorkCentre 3215" "usb_MFG=Xerox" "adminurl=http://XRX9C934E46E066.local./sws/index.html?link=/sws/app/settings/network/AirPrint/AirPrint.html" "pdl=application/octet-stream,application/PCL,application/postscript,application/vnd.hp-PCL,application/vnd.hp-PCLXL,application/x-Epson,application/x-IBM-ProPrint,application/x-QPDL,text/plain,image/urf" "product=(Xerox WorkCentre 3215)" "ty=Xerox WorkCentre 3215" "priority=51" "qtotal=1" "note=" "rp=ipp/print" "txtvers=1"]
=  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       PDL Printer          local
   hostname = [XRX9C934E46E066.local]
   address = [192.168.0.16]
   port = [9100]
   txt = ["Staple=F" "Sort=F" "Fax=T" "Scan=T" "Punch=0" "PaperMax=legal-A4" "PaperCustom=T" "Duplex=F" "Copies=T" "Color=F" "Collate=F" "Bind=F" "kind=document,envelope,label" "MDL=WorkCentre 3215" "MFG=Xerox" "usb_CMD=MFG:Xerox;CMD:SPL,PCL6,POSTSCRIPT,URF,FAX,FWV,EXT;MDL:WorkCentre 3215;CLS:PRINTER;CID:XR_PCL6_Basic_Mono;MODE:FAX3,SCN,SPL3,R000105;" "usb_MDL=WorkCentre 3215" "usb_MFG=Xerox" "adminurl=http://XRX9C934E46E066.local./sws/index.html?link=/sws/app/settings/network/AirPrint/AirPrint.html" "pdl=application/octet-stream,application/PCL,application/postscript,application/vnd.hp-PCL,application/vnd.hp-PCLXL,application/x-Epson,application/x-IBM-ProPrint,application/x-QPDL,text/plain,image/urf" "product=(Xerox WorkCentre 3215)" "ty=Xerox WorkCentre 3215" "qtotal=1" "note=" "txtvers=1"]
=  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       UNIX Printer         local
   hostname = [XRX9C934E46E066.local]
   address = [192.168.0.16]
   port = [515]
   txt = ["Staple=F" "Sort=F" "Fax=T" "Scan=T" "Punch=0" "PaperMax=legal-A4" "PaperCustom=T" "Duplex=F" "Copies=T" "Color=F" "Collate=F" "Bind=F" "kind=document,envelope,label" "MDL=WorkCentre 3215" "MFG=Xerox" "usb_CMD=MFG:Xerox;CMD:SPL,PCL6,POSTSCRIPT,URF,FAX,FWV,EXT;MDL:WorkCentre 3215;CLS:PRINTER;CID:XR_PCL6_Basic_Mono;MODE:FAX3,SCN,SPL3,R000105;" "usb_MDL=WorkCentre 3215" "usb_MFG=Xerox" "adminurl=http://XRX9C934E46E066.local./sws/index.html?link=/sws/app/settings/network/AirPrint/AirPrint.html" "pdl=application/octet-stream,application/PCL,application/postscript,application/vnd.hp-PCL,application/vnd.hp-PCLXL,application/x-Epson,application/x-IBM-ProPrint,application/x-QPDL,text/plain,image/urf" "product=(Xerox WorkCentre 3215)" "ty=Xerox WorkCentre 3215" "priority=49" "qtotal=1" "note=" "rp=auto" "txtvers=1"]
=  wlan3 IPv4 Xerox WorkCentre 3215 (XRX9C934E46E066)       _scanner._tcp        local
   hostname = [XRX9C934E46E066.local]
   address = [192.168.0.16]
   port = [9400]
   txt = ["MDL=WorkCentre 3215" "MFG=Xerox" "usb_MDL=WorkCentre 3215" "usb_MFG=Xerox" "ty=Xerox WorkCentre 3215" "note=" "txtvers=1"]
+  wlan0 IPv6 iam                                           Remote Disk Management local
+  wlan0 IPv6 iam [c4:3d:c7:d2:7c:11]                       Workstation          local
+  wlan3 IPv6 iam                                           Remote Disk Management local
+  wlan3 IPv6 iam [e0:46:9a:04:01:be]                       Workstation          local
+  wlan1 IPv6 iam                                           Remote Disk Management local
+  wlan1 IPv6 iam [e0:46:9a:04:01:32]                       Workstation          local
+  wlan3 IPv4 iam                                           Remote Disk Management local
+  wlan3 IPv4 iam [e0:46:9a:04:01:be]                       Workstation          local
=  wlan0 IPv6 iam                                           Remote Disk Management local
   hostname = [iam.local]
   address = [fe80::c63d:c7ff:fed2:7c11]
   port = [22]
   txt = []
=  wlan0 IPv6 iam [c4:3d:c7:d2:7c:11]                       Workstation          local
   hostname = [iam.local]
   address = [fe80::c63d:c7ff:fed2:7c11]
   port = [9]
   txt = []
=  wlan3 IPv6 iam                                           Remote Disk Management local
   hostname = [iam.local]
   address = [::9c03:db68:7363:c50b]
   port = [22]
   txt = []
=  wlan3 IPv6 iam [e0:46:9a:04:01:be]                       Workstation          local
   hostname = [iam.local]
   address = [::9c03:db68:7363:c50b]
   port = [9]
   txt = []
=  wlan1 IPv6 iam                                           Remote Disk Management local
   hostname = [iam.local]
   address = [fe80::e246:9aff:fe04:132]
   port = [22]
   txt = []
=  wlan1 IPv6 iam [e0:46:9a:04:01:32]                       Workstation          local
   hostname = [iam.local]
   address = [fe80::e246:9aff:fe04:132]
   port = [9]
   txt = []
=  wlan3 IPv4 iam                                           Remote Disk Management local
   hostname = [iam.local]
   address = [192.168.0.13]
   port = [22]
   txt = []
=  wlan3 IPv4 iam [e0:46:9a:04:01:be]                       Workstation          local
   hostname = [iam.local]
   address = [192.168.0.13]
   port = [9]
   txt = []

Страницы: [1]   Вниз

0 Пользователей и 1 Гость просматривают эту тему.

Страницы: [1]   Вверх