-
- #1
This seems to happen pretty consistently lately. When I first played, it wasn’t happening for hours. Then all of a sudden, it happens a lot of times. I’ve even done a computer reset and all. Doesn’t work.
-
-
- #3
What is jumping out at me is a whole list similar to
What i would suggest is make a backup of your profile, then search and delete every data block that is referenced in your error log.
Have you removed a mod that adds item? If so, and you still have some of those item in your inventory. Then reinstalling the mod and removing all items added from your inventory before removal should fix it. -
- #4
I never added anything to the game for outside mods. I’ve done everything base.
-
- #5
I have no idea what has caused it, just stating a common cause, the solution should still be valid.
-
- #6
Thanks. I wasn’t too far into the game. So I’ll just wipe it. I only lost like 3 hours of work. Nbd. Also, I’m not sure how to delete the stuff you’re talking about. I’m not the most technical person ever. I’m pretty smol smooth brain.
-
- #7
No worries for reference the process would be as follows.
Find your profile in SPTarkovuserprofiles copy it and past it somewhere else (as a backup)
Install notepad++, vs codium, or some other code editing software (don’t use windows notepad as it causes formatting errors)Right click your profile and click edit with notepad++ (or preferred program).
Press alt 0 to collapse all (makes it easier to see what you are doing)
Press ctr f and enter the id you are searching for into the fieldclick find all in current document. you will get a list at the bottom
you can double click each result to jump straight to it. Do so and delete the whole data block as follows,
It is important to include the {} and , and to grab the whole block. If it happens to be the last in the list, you will need to remove the , from the end of the above item.
Repeat this for every occurrence of each ID and you should be good to go. -
- #8
I am going to mark this as solved, have fun!
loreder2010 написал:
ничего
Из ничего и не будет ничего.
- пожаловаться
- скопировать ссылку
G1wzz написал:
почему-то слетел URL в лаунчере
Сколько пользуюсь АКИ, ни разу не встречал ситуацию «почему-то слетел URL в лаунчере» . Вопрос — кто виновник в ситуации:-)
- пожаловаться
- скопировать ссылку
Саня 21
Что пишет в логах сервера?
- пожаловаться
- скопировать ссылку
BlackTigerTK
ничего
- пожаловаться
- скопировать ссылку
Саня 21
А до этого работало выходит? попробуй просто сначала сервер запустить, подождать пока полностью прогрузится, а потом уже лаунчер
- пожаловаться
- скопировать ссылку
armageddon_Trulio
Так просто retry можно нажать и запустится лаунчер, вернее найдет запущенный сервак.
- пожаловаться
- скопировать ссылку
не получается у меня
- пожаловаться
- скопировать ссылку
Aleksey Aralin
Что именно не получается?
- пожаловаться
- скопировать ссылку
Aleksey Aralin написал:
не получается у меня
Значит, плохо стараетесь! Надо поднатужиться!
А если серьёзно — как известно, телепаты все в отпусках. Так что без подробного описания проблемы помощи не будет.
- пожаловаться
- скопировать ссылку
Выдаёт такую ошибку при открытии спт
- пожаловаться
- скопировать ссылку
Zibazi
Как я понял тут ошибка по видео карте. Можно попробовать дрова обновить.
Ругается на DLSS и Nvidia Reflex
- пожаловаться
- скопировать ссылку
Zibazi
Попробуйте все файлы из каталога C:UsersUserNameAppDataRoamingBattlestate GamesEscape from TarkovSettings перенести в другое место. Или хотя бы файл Graphics.ini
И снова запустить игру.
- пожаловаться
- скопировать ссылку
а если у тебя amd?
- пожаловаться
- скопировать ссылку
Попробовал все вышеперечисленное, ничего не помогает..
Буквально пару дней назад играл и все работало а сейчас «Сервер по умолчанию» SPT-AKI» не доступен. «
- пожаловаться
- скопировать ссылку
Den4ikKaban4ik
Антивирус какой стоит? Судя по всему, у Вас блокируется соединение между ланчером и сервером по порту 6969. Соответственно, надо создать правило, разрешающее данное соединение.
- пожаловаться
- скопировать ссылку
BlackTigerTK
Антивирус я удалил, defender-а нет
- пожаловаться
- скопировать ссылку
- пожаловаться
- скопировать ссылку
Версию SPT-AKI переустанавливал раз 5, сам тарков тоже переустанавливал, ничего не помогает, пк перезапуска. .Exe через админа пробовал запуска, байпасс устанавливал, фикс тоже
- пожаловаться
- скопировать ссылку
А пробовал кнопку «повторить» наживать после того, как появятся зеленые буквы?
Так же в ланчере зайди в параметры и посмотри путь, если не совпадает, переименуй как в ланчере, либо выбери, после выбора выруби ланчер и сервер, после этого пробуй запустить.
Пути должны совпадать.
- пожаловаться
- скопировать ссылку
deep1tone
Да пробовал нажимать и так же ничего, путь посмотрю попробую переименуют может получится что?..
- пожаловаться
- скопировать ссылку
Если есть телеграмм можете его дать пожалуйста, там написать легче будет да и видео записать
- пожаловаться
- скопировать ссылку
Все совпадает, антивируса нет, «Повторить» нажимал после 3 зелёных стрелок а так ничего и нет
- пожаловаться
- скопировать ссылку
Буквально неделю назад играл а сейчас все поломалось((
- пожаловаться
- скопировать ссылку
Den4ikKaban4ik
Вот вспоминай, что было сделано, удалено, установлено, что сломало игру. Она же не просто так незапускается.
- пожаловаться
- скопировать ссылку
После убийства Решалы в одном из рейдов, в следующих рейдах он перестал спавниться вообще. Уже сыграл больше 10 рейдов, но он ни разу не заспавнился. Можете подсказать, как это можно исправить?
- пожаловаться
- скопировать ссылку
Asher_Neytron
Как вариант, отредактировать файл base.json в нужной локации. Ищите параметр BossChance и ставите хоть 100
- пожаловаться
- скопировать ссылку
Приветствую.Помогите понять в чем дело.По квесту Егеря(убить решалу и забрать ТТ золотой) Убил его раз 10-15 и не разу не спавнился его ТТ-Золотой.Это баг игры или тупо не везет на его спавн?
- пожаловаться
- скопировать ссылку
Guyrza_186
Тупо не везет. Ещё игра удивительным образом рандомит, когда этот квест не активен, ТТ спавнится почти через раз, когда активен, почти не спавнится. Бывает у чвк спавнится, только вот можно ли его сдать по квесту, вопрос.
- пожаловаться
- скопировать ссылку
Возможно кому-то помогу, у кого такая же проблема будет, в общем почему-то слетел URL в лаунчере, его нужно вернуть, запускаем сервер и копируем адрес зелеными буквами и вставляем и работает все
- пожаловаться
- скопировать ссылку
G1wzz
От себя добавлю, даная проблема выглядит так…
То-есть при запущенном сервере, лаунчер не видит его.
Явление крайне редкое, сопоставимое с кривыми руками.
- пожаловаться
- скопировать ссылку
Содержание
- SPT-AKI Trace Error
- Default server ‘SPT-AKI’ is not available
- CWX Nov 15th 2021
- CWX Nov 15th 2021
- CWX Nov 15th 2021
- Participate now!
- Who is online?
- SPT-AKI won’t launch because of «EFT is not installed on your computer» after installing Windows 11
- CWX Jan 16th 2022
- CWX Jan 16th 2022
- OwnerAccount Feb 4th 2022
- Participate now!
- Who is online?
- Escape from tarkov isn’t installed, please buy a copy
- Unable to run Server.exe (exits immediately)
SPT-AKI Trace Error
This seems to happen pretty consistently lately. When I first played, it wasn’t happening for hours. Then all of a sudden, it happens a lot of times. I’ve even done a computer reset and all. Doesn’t work.
What is jumping out at me is a whole list similar to
What i would suggest is make a backup of your profile, then search and delete every data block that is referenced in your error log.
Have you removed a mod that adds item? If so, and you still have some of those item in your inventory. Then reinstalling the mod and removing all items added from your inventory before removal should fix it.
I never added anything to the game for outside mods. I’ve done everything base.
I have no idea what has caused it, just stating a common cause, the solution should still be valid.
Thanks. I wasn’t too far into the game. So I’ll just wipe it. I only lost like 3 hours of work. Nbd. Also, I’m not sure how to delete the stuff you’re talking about. I’m not the most technical person ever. I’m pretty smol smooth brain.
No worries for reference the process would be as follows.
Find your profile in SPTarkovuserprofiles copy it and past it somewhere else (as a backup)
Install notepad++, vs codium, or some other code editing software (don’t use windows notepad as it causes formatting errors)
Right click your profile and click edit with notepad++ (or preferred program).
Press alt 0 to collapse all (makes it easier to see what you are doing)
Press ctr f and enter the id you are searching for into the field
click find all in current document. you will get a list at the bottom
you can double click each result to jump straight to it. Do so and delete the whole data block as follows,
It is important to include the <> and , and to grab the whole block. If it happens to be the last in the list, you will need to remove the , from the end of the above item.
Repeat this for every occurrence of each ID and you should be good to go.
Источник
Default server ‘SPT-AKI’ is not available
Launcher does not start. I get the error indicated in the title. Server started
had the same problem, the way I finally fixed it was by making a clean installation of SPT
была та же проблема, как я, наконец, исправил это, выполнив чистую установку SPT
This is a clean install. I deleted all SPT files, copied everything according to the instructions, downloaded a new server and launcher, and got this error
I deleted the user folder and it did the trick. But I also lost my profile. To restore it, as I understand it, is no longer possible, and you have to start all over again? Where is the account information stored?
idk know if this would work but you might be able to get your profile back by restoring your user folder then go to profiles and copy the json file inside
Check the important section at the bottom.
This new version requires a new profile, changes in it won’t allow you to use it without editing them
PLEASE DON’T DM ME FOR SUPPORT, UNLESS I ASK YOU TO, I WILL NOT ANSWER THEM.
I DO NOW HAVE THE POWER TO BONK SO DON’T DO THE ABOVE!
WEEWOO
CWX Nov 15th 2021
CWX Nov 15th 2021
CWX Nov 15th 2021
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
Who is online?
Just a few of the 258 users online
- 258 Members and 680 Guests
- Record: 339 Users ( Feb 2nd 2022 )
Источник
SPT-AKI won’t launch because of «EFT is not installed on your computer» after installing Windows 11
So I did everything advised on the F.A.Q.
I even made a complete re-installation of the original Escape From Tarkov, changed settings and ran an online raid, but despite everything the SPT-AKI launcher keep telling me that Escape From Tarkov isn’t installed on my computer and it won’t allow me to launch the client.
I don’t know what else to do at this point.
Edited once, last by speedy_von_gofast ( Jan 14th 2022 ).
So I did everything advised on the F.A.Q.
I even made a complete re-installation of the original Escape From Tarkov, changed settings and ran an online raid, but despite everything the SPT-AKI launcher keep telling me that Escape From Tarkov isn’t installed on my computer and it won’t allow me to launch the client.
I don’t know what else to do at this point.
Have you reinstalled the BSG launcher aswell? Also try removing the user folder from SPT see if it’ll work
Have you reinstalled the BSG launcher aswell? Also try removing the user folder from SPT see if it’ll work
No it is not about this.I know this problem’s solution but i dont know how to help.This dude needs a folder that named install_EFT.You have to put this folder in C: drive in the open and open the register.bat with admin rights.But i dont remember where did i found this folder.I will try to upload to a site as last option.
Have you reinstalled the BSG launcher aswell? Also try removing the user folder from SPT see if it’ll work
Removing the user folder from SPT did the trick. Thank you!
Removing the user folder from SPT did the trick. Thank you!
CWX Jan 16th 2022
CWX Jan 16th 2022
OwnerAccount Feb 4th 2022
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
Who is online?
Just a few of the 258 users online
- 258 Members and 676 Guests
- Record: 339 Users ( Feb 2nd 2022 )
Источник
Escape from tarkov isn’t installed, please buy a copy
I am trying to start the game, first time installing, and I get the message saying I dont own EFT, I’ve tried going into a raid, I’ve tried changing a graphics setting, I dont know what else to do
I dont have a client or module log
Kybar,
Have you downgraded the game with a patcher to supported version?
Latest version of SPT-AKI requires Escape From Tarkov 0.12.11.7.15680
Be sure to check latest version of the AKI PATCHER and follow every step of instructions of patcher and SPT-AKI itself.
Kybar,
Have you downgraded the game with a patcher to supported version?
Latest version of SPT-AKI requires Escape From Tarkov 0.12.11.7.15680
Be sure to check latest version of the AKI PATCHER and follow every step of instructions of patcher and SPT-AKI itself.
Yeah I did, at least i believe i did, i had some issues during file transfers where it would crash my file explorer, let me retry doing the patch, and does it matter if i do the patch after i played a raid and changed settings
Also, should i actually extract from the raid or is it fine if i died like 5 minutes into it?
Источник
I’ve just tried to get SPT-AKI working for the very first time, with a couple snags along the way. The instructions I was following: How to install AKI
The initial issues I ran into was that the AKI Patcher Tool needed .NET Desktop Runtime 5.0.12; the 5.0.4 version linked in the Requirements section did not work (they installed, but the patcher binary would not run, and i have Windows Event Viewer entries confirming that). I solved that problem by installing both x64 versions of the .NET Desktop Runtime 5.0.12 as well as .NET Runtime 5.0.12 from here: https://dotnet.microsoft.com/download/dotnet/5.0
After that, the patcher ran and reported no errors. Great.
Problems began once I reached the «Double-click on the Server executable» phase of the installation: doing so does nothing. It briefly pops up a window and immediately exits/closes the window. No logs are generated. A Properties on Server.exe says that it’s a Node.js application of some sort (. ).
I have a couple suspicions as to the source of the problem, but I’m not sure how to verify them. One of the key aspects is that I’m using Windows 7 SP1 x64, which makes me wonder if whatever built Server.exe isn’t being built with Windows 7 compatibility in mind. Another possibility is a missing requirement for SPT-AKI, but best I can tell, I do in fact have all the necessary .NET runtimes (3.5 comes with Windows 7, and I have .NET Framework 4.7.2 installed as well), as well as the Visual C++ runtime in question, though it doesn’t appear in WMI’s product list, running the vcredist binary only brings up Repair and Uninstall). Here’s verification of some of it:
wmic:rootcli>product get name
Microsoft .NET Runtime — 5.0.12 (x64)
Microsoft .NET Host — 5.0.12 (x64)
Microsoft Windows Desktop Runtime — 5.0.12 (x64)
Microsoft .NET Framework 4.7.2
What other information can I provide that would help?
Источник
Сервер выдает ошибку Mod SPT-AKI-ProfileEditor is missing package.json
Это не мод, а отдельная программа. Ее не нужно распаковывать в папку mods сервера.
Программа выдает сообщение: «Сервер SPT-AKI не найден. Попробовать снова?»
Убедитесь что в папке сервера присутствует папка userprofiles. Перед использованием программы необходимо запустить сервер, создать профиль в лаунчере, и зайти хотя бы один раз в игру.
Убедитесь что используете подходящую версию программы для вашего сервера SPT-AKI. Если в README не указана совместимость с вашей версией сервера, ждите обновления. Или можете попробовать отредактировать относительные пути в файле AppSettings.json, но успех не гарантируется!
Убедитесь что все папки и файлы из разделов DirsList и FilesList в файле AppSettings.json присутствуют в папке сервера, и имеют правильные названия (некторые левые сборки SPT-AKI могут изменять названия файлов, например Server1.exe вместо Server.exe).
При необходимости можно внести изменения в эти разделы.
Пример разделов DirsList и FilesList в файле AppSettings.json:
"DirsList": { "dir_globals": "Aki_Data\Server\database\locales\global", "dir_traders": "Aki_Data\Server\database\traders", "dir_bots": "Aki_Data\Server\database\bots\types", "dir_profiles": "user\profiles" }, "FilesList": { "file_globals": "Aki_Data\Server\database\globals.json", "file_items": "Aki_Data\Server\database\templates\items.json", "file_quests": "Aki_Data\Server\database\templates\quests.json", "file_areas": "Aki_Data\Server\database\hideout\areas.json", "file_handbook": "Aki_Data\Server\database\templates\handbook.json", "file_serverexe": "Aki.Server.exe" },
UPD for SPT-AKI 3.0.0: Редактор профиля не работает с версией 3.0.0?
UPD: Начиная с версии 2.4 программа показывает диалог, со списком файловпапок которые не удалось обнаружить в выбранный папке. При необходимости можно отредактировать относительные пути в этом диалоге.
В окне «Добавление предметов» отсутствуют некоторые предметы
Многие предметы недоступны для добавления в схрон, потому что могут поломать профиль. Возможно это измениться в будущих обновлениях, а возможно нет.
Антивирус Windows Defender SmartScreen считает эту программу подозрительной
Данная программа предоставляется с открытым исходным кодом, и не содержит никаких вирусов при условии что вы скачали программу из этого репозитория GitHub. Если вы не доверяете данному репозиторию, откажитесь от использования программы.
Статусы отдельных квестов не сохраняются
Сервер проверяет статусы квестов на соответствия различным условиям (уровень, другие квесты и другое), и исправляет их. Поэтому, меняйте статус квеста после его разблокировки в игре, или устанавливайте все характеристики профиля на максимум
UPD: Отключить проверку статусов квестов можно в ALLINONE MOD
UPD 2: Начиная с версии 2.2 программа проверяет статусы квестов на соответствие большой части условий сервера, и предлагает исправить найденные несоответствия, если в настройках не установлено «Всегда игнорировать» (пункт «Действие по умолчанию для проблем с профилем», в разделе «Дополнительное»).
Уровни торговцев не сохраняются
Уровень ЧВК ниже требуемого для установленных уровней торговцев. Увеличьте уровень ЧВК.
UPD: Начиная с версии 2.2 программа проверяет уровни торговцев на соответствие уровню ЧВК, и предлагает исправить уровень, если в настройках не установлено «Всегда игнорировать» (пункт «Действие по умолчанию для проблем с профилем», в разделе «Дополнительное»).
Где найти файл AppSettings.json, логи, локализации, и бэкапы сделанные программой?
Для версии приложения 2.2 или выше:
Папка пользователяAppDataRoamingSPT-AKI Profile Editor
%AppData%SPT-AKI Profile Editor (нажмите WIN + R, скопируйте в появившееся окно этот путь и нажмите Enter, или запустите программу, Настройки — Устранение проблем — Открыть папку данных приложения)
Backups — бэкапы профилей
Localizations — локализации приложения
Logs — логи приложения
AppSettings.json — настройки приложения
Для версий приложения 2.0 — 2.1.1:
Корневая папка приложения
Backups — бэкапы профилей
Localizations — локализации приложения
Logs — логи приложения
AppSettings.json — настройки приложения
В программе отображаются только активные квесты
Включите пункт «Добавление отсутствующих квестов в профиль» в Настройках — Дополнительное
В программе не отображаются все доступные скиллы навыки владения оружием
Включите пункт «Добавление отсутствующих умений Дикого в профиль Добавление отсутствующих навыков владения оружием в профиль» в Настройках — Дополнительное
Названия предметов, квестов, скиллов и т.д. не соответствуют названиям в игре
В игре выбран язык не соответствующий выбранной локализации в редакторе профиля. Если необходимая локализация отсутствует, можно создать нужную, используя в качестве основы Английскую локализацию: (Редактирование создание файлов локализации)
UPD: Начиная с версии 2.4 создать новую локализацию можно в настройках, нажав на кнопку «+» рядом с выбранным языком.
Featured SPT-AKI-INSTALLER 1.1.4
Simple installer for SPT-AKI, fully automated
This is the first version of an SPT-AKI Installer,
this is fully automated, it will download the AKI version itself and Patcher also.
— Update EFT to the latest version through the BSG launcher.
— Place the installer in an empty folder. (E.G. C:SPT)
— Run the installer.
As this is the first version, there may be bugs we didn’t find, any issues please use the support thread to the right >>>>
Before you download and use this, understand that it will download AKI and the relevant Patcher required for your client version from our GITEA Repo.
(the same place is if you download them separately)
If you experience issues After the installer is finished, follow the usual guidelines for issues, with checking the FAQ and if that doesn’t help,
move to the support forum.
Example of the installer: (the text has changed a little, I’m just too lazy to update the pictures )
Version 1.1.4
added warning message where EscapeFromTarkov.exe was not found in directory
^ if this does happen, check your game path assigned to BSG’s launcher as we use this path.
Version 1.1.3
Made adjustments to not require patching process when versions match
Version 1.1.2
Waffle made a fucky wucky and now it should be fixed UwU
Version 1.1.1
hopefully fixed issues with mirrorList
Version 1.1.0
@waffle has been an absolute boss and got this up and running with a new system, we have dropped using GITEA for downloading the patcher as it doesnt seem like this will be fixed, it will download the files still.
changed the layout, much easier to read and user friendly, will update the overview later on
Version 1.0.1
fix for the installer trying to delete the patcher that doesn’t exist if game version matches
Version 1.0.0
MarroW Aug 9th 2022
I followed all the steps mentioned and the game runs, but before starting, it tells me the file hash does not match. I got the EFT game downloaded from a friend.
Can anyone help?
M0nkeyz Aug 6th 2022
how do i fix the «Default server ‘SPT-AKI’ is not available» message. I tried manually installing spt and the auto installer, nothing worked?
sz0 Aug 4th 2022
The installer installs everything without a hitch. When I run Aki-Launcher.exe the game instantly closes and deletes EscapeFromTarkove_BE.exe. This is on the latest 19708 version of EFT.
use the main support thread and post logs, this is not related to the installer
Submh0 Jul 30th 2022
Hi, while making a fresh install for 3.1.1 from 3.0 I continue to receive a message at the very end of installing stating that the installer is unable to find the 3.1.1 patcher. 3.1.1 is made for 19078 is it not? So it wouldn’t need a patcher? I have tried downloading the spt aki files individually so that it can «find the patcher.» But that hasn’t worked. Am I stupid and need the patcher from 19078 to 18something or other? Thanks.
have you downloaded the latest installer, I added a fix for the needing a patcher when it doesnt
Bsharp81 Jul 30th 2022
This mod is great you did a great job Just wondering when airdrops will be available
Choya Aug 1st 2022
I think it’s server side, so it’ll not be able to implement in SPT?
Source: Airdrops aren’t enabled in offline mode for Tarkov. Nikita said on a devstream that it’s handled on server end.
correct with it being server side, I’m currently recreating the airdrops, having to rewrite all the scripts, it’ll come, just not yet
Bsharp81 Aug 2nd 2022
Thank you you’re awesome
redman147 Jul 29th 2022
I’m not asking for this to be implemented, but how hard would it be for me to program the installer to download a certain patcher so I can install a certain version of SP?
dev.sp-tarkov.com/CWX/SPT-AKI-Installer, make a fork and go ham, we wont have it but your problem would be the patchers not being able to go back correctly.
redman147 Jul 30th 2022
Good to know and thank you for the information.
nowherejack Jul 29th 2022
not related to the installer, if you really want to know all it does is copy files and extract, hit the support threads up with logs and that and someone can try help
Mando75 Jul 28th 2022
I keep getting a unconfirmed download, basically my computer doesnt trust the download but idk whats going on
as do most other installers made by a person, nothing i can do about that unfortunately, up to you if you want to use it, the source code is on the right also if you want to take a look
MrRaptR Jul 26th 2022
After installing files from my live install were removed and full reinstall was required.
Not sure what caused the issue but the removed files caused SPT to not launch due to missing ConsistencyInfo file that the BSG Launcher needs making the SPT Launcher determine the game is not installed on the pc.
i have no idea how you have had that happen, the installer only deletes 3 files in the install directory
Fuli-N Jul 25th 2022
what do i do when it says 0% copying?
elliot jones Jul 25th 2022
hi there i keep getting this error when i try to run the launcher as it closes just after a few seconds
│ Release Checks │ Pending │
│ Download Files │ Pending │
│ Copy Client Files │ Pending │
│ Setup Client │ Pending │
Unhandled exception. System.IO.FileNotFoundException: D:EFT/EscapeFromTarkov.exe
at SPT_AKI_Installer.Aki.Helper.PreCheckHelper.DetectOriginalGameVersion(String gamePath)
at SPT_AKI_Installer.Aki.Core.Model.LiveTableTaskRunner.RunAllTasksAsync(List`1 tasks, LiveDisplayContext context, Table table)
at SPT_AKI_Installer.Aki.Core.Model.LiveTableTaskRunner.<>c__DisplayClass1_0. b__2>d.MoveNext()
at Spectre.Console.LiveDisplay.<>c__DisplayClass17_0. b__0>d.MoveNext() in /_/src/Spectre.Console/Live/LiveDisplay.cs:line 80
at Spectre.Console.LiveDisplay.<>c__DisplayClass18_0`1. b__0>d.MoveNext() in /_/src/Spectre.Console/Live/LiveDisplay.cs:line 110
Mods website: How-to
Bunch of little tutorials on how to use the mods website.
In this article, we will see how to use some of the website features.
Tutorials
How to see other mods from an specific author
Here we are going to see how to find authors mods.
First, find go to the author profile (for our exemple, we will use my profile, so here:
Once on the author profile, click on the «Files» text, here:
On this page, you will see all the other mods made by the author.
How to filter by AKI version
For this, it is simple, go on this page: https://mods.sp-tarkov.com/files/
And then, look at the right part, here:
Select the desired version, and click «submit».
Now only the selected version mods will appear.
How to mark all mods/threads as read in one click?
And go to the top right of the page, for clicking on that button:
This will mark all unread items, as read.
How to create tabs in your mod page
That’s simple. You need to include the following code in the text editor:
SPT-AKI-INSTALLER
CWX added a new file:
This is the first version of an SPT-AKI Installer,
this is fully automated, it will download the AKI version itself and Patcher also.
— Update EFT to the latest version through the BSG launcher.
— Place the installer in an empty folder. (E.G. C:SPT)
— Run the installer.
As this is the first version, there may be bugs we didn’t find, any issues please use the support thread to the right >>>>
Before you download and use this, understand that it will download AKI and the relevant Patcher required for your client version from our GITEA Repo.
(the same place is if you download them separately)
If you experience issues After the installer is finished, follow the usual guidelines for issues, with checking the FAQ and if that doesn’t help,
move to the support forum.
Example of the installer: (the text has changed a little, I’m just too lazy to update the pictures )
PLEASE DON’T DM ME FOR SUPPORT, UNLESS I ASK YOU TO, I WILL NOT ANSWER THEM.
I DO NOW HAVE THE POWER TO BONK SO DON’T DO THE ABOVE!
WEEWOO
Spt aki mods how to install
Copy raw contents
Сервер выдает ошибку Mod SPT-AKI-ProfileEditor is missing package.json
Это не мод, а отдельная программа. Ее не нужно распаковывать в папку mods сервера.
Программа выдает сообщение: «Сервер SPT-AKI не найден. Попробовать снова?»
Убедитесь что в папке сервера присутствует папка userprofiles. Перед использованием программы необходимо запустить сервер, создать профиль в лаунчере, и зайти хотя бы один раз в игру.
Убедитесь что используете подходящую версию программы для вашего сервера SPT-AKI. Если в README не указана совместимость с вашей версией сервера, ждите обновления. Или можете попробовать отредактировать относительные пути в файле AppSettings.json, но успех не гарантируется!
Убедитесь что все папки и файлы из разделов DirsList и FilesList в файле AppSettings.json присутствуют в папке сервера, и имеют правильные названия (некторые левые сборки SPT-AKI могут изменять названия файлов, например Server1.exe вместо Server.exe). При необходимости можно внести изменения в эти разделы.
Пример разделов DirsList и FilesList в файле AppSettings.json:
UPD: Начиная с версии 2.4 программа показывает диалог, со списком файловпапок которые не удалось обнаружить в выбранный папке. При необходимости можно отредактировать относительные пути в этом диалоге.
В окне «Добавление предметов» отсутствуют некоторые предметы
Многие предметы недоступны для добавления в схрон, потому что могут поломать профиль. Возможно это измениться в будущих обновлениях, а возможно нет.
Антивирус Windows Defender SmartScreen считает эту программу подозрительной
Данная программа предоставляется с открытым исходным кодом, и не содержит никаких вирусов при условии что вы скачали программу из этого репозитория GitHub. Если вы не доверяете данному репозиторию, откажитесь от использования программы.
Статусы отдельных квестов не сохраняются
Сервер проверяет статусы квестов на соответствия различным условиям (уровень, другие квесты и другое), и исправляет их. Поэтому, меняйте статус квеста после его разблокировки в игре, или устанавливайте все характеристики профиля на максимум
UPD: Отключить проверку статусов квестов можно в ALLINONE MOD
UPD 2: Начиная с версии 2.2 программа проверяет статусы квестов на соответствие большой части условий сервера, и предлагает исправить найденные несоответствия, если в настройках не установлено «Всегда игнорировать» (пункт «Действие по умолчанию для проблем с профилем», в разделе «Дополнительное»).
Уровни торговцев не сохраняются
Уровень ЧВК ниже требуемого для установленных уровней торговцев. Увеличьте уровень ЧВК.
UPD: Начиная с версии 2.2 программа проверяет уровни торговцев на соответствие уровню ЧВК, и предлагает исправить уровень, если в настройках не установлено «Всегда игнорировать» (пункт «Действие по умолчанию для проблем с профилем», в разделе «Дополнительное»).
Где найти файл AppSettings.json, логи, локализации, и бэкапы сделанные программой?
Для версии приложения 2.2 или выше:
В программе отображаются только активные квесты
В программе не отображаются все доступные скиллы навыки владения оружием
Названия предметов, квестов, скиллов и т.д. не соответствуют названиям в игре
В игре выбран язык не соответствующий выбранной локализации в редакторе профиля. Если необходимая локализация отсутствует, можно создать нужную, используя в качестве основы Английскую локализацию: (Редактирование создание файлов локализации)
UPD: Начиная с версии 2.4 создать новую локализацию можно в настройках, нажав на кнопку «+» рядом с выбранным языком.
SPT-Aki Profile Editor
Good morning, i just installed SPT-AKI Profile Editor everything is fine but when i go to select the SPT-AKI folder it just doesn’t let me?
skitles55 added a new version:
2.3.0:
Fixed search for items in items adding tab (#23).
Added viewingpartial editing of PMC/Scav equipment
Added display of item tags, and the number of items in the stack
Added viewingediting the contents of containers
Added weapon stats view, and exportadd to custom builds
Added the ability to add assembled weapons from custom / global assemblies
2.2.0:
UI improvements
Fixed error reading FailRestartable, MarkedAsFailed quest statuses (#17).
Improved trader level setting logic.
Added an…
Fixed search for items in items adding tab (#23).
Added viewingpartial editing of PMC/Scav equipment
Added display of item tags, and the number of items in the stack
Added viewingediting the contents of containers
Added weapon stats view, and exportadd to custom builds
Added the ability to add assembled weapons from custom / global assemblies
Fixed error reading FailRestartable, MarkedAsFailed quest statuses (#17).
Improved trader level setting logic.
Settings files, logs, localizations, and backups have been moved to the AppData folder.
Added «Troubleshooting» section to settings.
Fixed incorrect item adding bug (#18).
Added checking for profile issues before saving (checking quest statuses and traders levels against various conditions).
Added setting «Default action for profile issues» in the «Additional» section.
Added a list of weapon parts and mods to weapon builds.
Fixed missing weapon parts and mods in the add items window.
Источники информации:
- http://hub.sp-tarkov.com/article/2-mods-website-how-to/
- http://hub.sp-tarkov.com/forum/thread/1856-spt-aki-installer/
- http://github.com/SkiTles55/SPT-AKI-Profile-Editor/blob/master/FAQ.md
- http://hub.sp-tarkov.com/forum/thread/160-spt-aki-profile-editor/?postID=12206
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.