Startup config file open failed unknown error 0

18 comments

1. 

   yes, fsck disk0: works.
   There may be some error runiing fsck but the end result is you can saved.

   thanks for sharing.

2. 

   I think ASA exec fsck auto as a boot routine, in other words if fsck fails from CL, just try to reboot (this way you are sure partition is unmounted, fsck wont fail with resource busy error).

   …all Linux distros do fsck on / (root) partition. Or to force fsck on next reboot exec “shutdown -rF now”

3. 

   i m also having same problem, someone pls help me

   ciscoasa# fsck disk0:
   umount: Couldn’t umount /mnt/disk0: Invalid argument
   dosfsck 2.11, 12 Mar 2005, FAT32, LFN
   /dev/hda1: 8 files, 6224/65463 clusters
   mount: Mounting /dev/hda1 on /mnt/disk0 failed: Device or resource busy

   fsck of disk0: complete
   WARNING: Restoring security context mode failed.
   ciscoasa#

4. 

   I am having the same problem but with disk1: I have used the same external compact flash in another ASA but a newer IOS version 8.4 and it works fine. I have tried the same compact flash in a cisco 2851 and it works there as well. Could it be a bug in the Cisco IOS version 8.2 for ASA 5520? Or does anyone have a work around?

5. 

   Today while working on a config of a new CISCO catalyst 3750 x-series,I ran into a very strange error that I wanted to share with you.

   When I was finished, the error mess was

   SW#wr

   startup-config file open failed (Not enough space)

   please anybody help me…

   • 

     Hi Dinesh,
     You may want to try to delete some files on your flash drive and reduce the logging buffer.

     In some circumstances you may want to keep multiple IOS images on the local flash drive of your router or switch. The problem with this is that you could easily run out of space on your flash drive..

     Check the flash drive by simple typing in:
     SW# dir flash:

     This will show you what files you have on your flash and what is taking up so much space.

     To remove an upwanted file, type:
     SW# delete <filename>

     I hope this helps!

     Joe

     • 

       0 bytes copied in 0.009 secs (0 bytes/sec)

       DR-WAN-SW#diu r

       Directory of flash:/

       2 -rwx 1048 Mar 4 1993 14:46:57 +00:00 multiple-fs

       3 drwx 1024 Mar 1 1993 00:02:28 +00:00 crashinfo_ext

       12 drwx 1024 Mar 1 1993 00:00:07 +00:00 crashinfo

       21 -rwx 1096 Mar 2 1993 17:57:37 +00:00 vlan.dat

       22 drwx 512 Mar 1 1993 00:17:16 +00:00 c3750e-universalk9-mz.122-55.SE3

       57671680 bytes total (20429824 bytes free)

       DR-WAN-SW#copy

       DR-WAN-SW#copy runn

       DR-WAN-SW#copy running-config flash:back

       DR-WAN-SW#copy running-config flash:backu

       DR-WAN-SW#copy running-config flash:backup

       Destination filename [backup]?

       4700 bytes copied in 5.814 secs (808 bytes/sec)

       DR-WAN-SW#dr ir

       Directory of flash:/

       2 -rwx 1048 Mar 4 1993 14:46:57 +00:00 multiple-fs

       3 drwx 1024 Mar 1 1993 00:02:28 +00:00 crashinfo_ext

       12 drwx 1024 Mar 1 1993 00:00:07 +00:00 crashinfo

       21 -rwx 1096 Mar 2 1993 17:57:37 +00:00 vlan.dat

       469 -rwx 4700 Mar 1 1993 00:51:31 +00:00 backup

       22 drwx 512 Mar 1 1993 00:17:16 +00:00 c3750e-universalk9-mz.122-55.SE3

       57671680 bytes total (20424192 bytes free)

       But memory space available in the switch and these and all basic switch configuration files na…these anything i want to delete…?

6. 

   I am trying to install new image to ASA in Romon I have erased the all data in disk0

   Why booting i am getting following error , looks like disk0 is not mounting

   rommon #13> tftp

   ROMMON Variable Settings:

   ADDRESS=192.168.1.10

   SERVER=192.168.1.1

   GATEWAY=192.168.1.1

   PORT=Management0/0

   VLAN=untagged

   IMAGE=asa823-k8.bin

   CONFIG=

   LINKTIMEOUT=20

   PKTTIMEOUT=4

   RETRY=20

   tftp asa823-k8.bin@192.168.1.1 via 192.168.1.1

   !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

   Received 15243264 bytes

   Launching TFTP Image…

   Cisco Security Appliance admin loader (3.0) #0: Fri Aug 6 07:52:16 MDT 2010

   Platform ASA5520

   Loading…

   dosfsck 2.11, 12 Mar 2005, FAT32, LFN

   open /dev/hda1:No such file or directory

   dosfsck(/dev/hda1) returned 1

   mount: mounting /dev/hda1 on /mnt/disk0 failed: No such file or directory

   mount: mounting /dev/hda1 on /mnt/disk0 failed: No such file or directory

   dosfsck 2.11, 12 Mar 2005, FAT32, LFN

   open /dev/hdb1:No such file or directory

   dosfsck(/dev/hdb1) returned 1

   mount: mounting /dev/hdb1 on /mnt/disk1 failed: No such file or directory

   mount: mounting /dev/hdb1 on /mnt/disk1 failed: No such file or directory

   Processor memory 341417984, Reserved memory: 62914560 (DSOs: 0 + kernel: 62914560)

   Total SSMs found: 0

   Total NICs found: 7

   mcwa i82557 Ethernet at irq 11 MAC: 001f.ca09.24b7

   mcwa i82557 Ethernet at irq 5 MAC: 0000.0001.0001

   i82547GI rev00 Gigabit Ethernet @ irq11 dev 1 in

7. 

   I have similar problem with FWSM.

   show disk:

   -#- –length– —–date/time—— path

   1 0 Jan 27 2008 22:55:22 .private

   2 0 Jan 27 2008 22:55:22 .private

   3 0 Jan 27 2008 22:55:22 .private

   4 0 Jan 27 2008 22:55:22 .private

   5 0 Jan 27 2008 22:55:22 .private

   6 0 Jan 27 2008 22:55:22 .private

   7 0 Jan 27 2008 22:55:22 .private

   8 0 Jan 27 2008 22:55:22 .private

   9 0 Jan 27 2008 22:55:22 .private

   10 0 Jan 27 2008 22:55:22 .private

   11 0 Jan 27 2008 22:55:22 .private

   12 0 Jan 27 2008 22:55:22 .private

   13 0 Jan 27 2008 22:55:22 .private

   14 0 Jan 27 2008 22:55:22 .private

   15 0 Jan 27 2008 22:55:22 .private

   16 1385 Mar 08 2008 07:55:50 old_running.cfg

   17 7350 Feb 22 2011 02:07:54 admin.cfg

   18 42691 Feb 25 2011 13:27:40 Serveri.cfg

   59658240 bytes available (90112 bytes used)

   File Allocation Table might be corrupted. Recommend running «fsck disk:»

   fsck disk:

   Checking the boot sector and partition table…

   Checking FAT, Files and Directories…

   Reclaiming unused space…

   Updating FAT…

   Destroying old disk cache…

   Initializing disk: cache, please wait…..Done.

   fsck of disk: complete

   WARNING: Restoring security context mode failed.

   Could be failed flash?

   • 

     It could be… the only way to know for sure is to either replace the flash or open a TAC case and see what they say. I’d love to know how it turns out either way.
     thanks!

8. 

   I have the same error message concerning disk0: but it’s because the internal flash has died. The device is still running and I’ve managed to pop in an external flash card, format it as disk1, and upload the correct software to it. I have changed the boot system and asdm image with the following command:

   boot system disk1:/asa724-k8.bin

   asdm image disk0:/asdm-61551.bin

   I then ran:

   copy run disk1:/ (- which executed successfully)

   Now I can’t ‘wr mem’ to disk1. I still get the error mentioned about disk0 in your original post. Being that disk0 is destroyed, how can i make this thing default to disk1. I’m assuming that’s what needs to happen.

   Thanks!

   A

   But I need to be able to ‘wr mem’ to disk1. Is this possible?

9. 

   ciscoasa# fsck disk0:

   umount: Couldn’t umount /mnt/disk0: Invalid argument

   dosfsck 2.11, 12 Mar 2005, FAT32, LFN

   /dev/hda1: 32 files, 56/62334 clusters

   mount: Mounting /dev/hda1 on /mnt/disk0 failed: Device or resource busy

   fsck of disk0: complete

   WARNING: Restoring security context mode failed.

   the problem still exist Kindly help…!

   • 

     I haven’t run into this problem before. Are you running multiple contexts? Is this in a stand along ASA or a FWSM? I’ve seen some issues with code versions that may give the warning message. Sorry that this is much more help.

   • 

     ciscoasa# sh mem

     Free memory: 17657000 bytes (13%)

     Used memory: 116560728 bytes (87%)

     ————- —————-

     Total memory: 134217728 bytes (100%)

     ciscoasa# fsck disk0

     umount: Couldn’t umount /mnt/disk0: Invalid argument

     dosfsck 2.11, 12 Mar 2005, FAT32, LFN

     /dev/hda1: 11 files, 6228/62334 clusters

     mount: Mounting /dev/hda1 on /mnt/disk0 failed: Device or resource busy

     fsck of disk0: complete

     WARNING: Restoring security context mode failed.

     I have stopped nad restarted the Asa firewall but still it doesn’t free memory.

10. 

    We just had the same issue on our standby ASA 5520. The primary one was fine, but the failover standby ASA gave the exact message you saw. I actually first noticed there was a problem when trying to upgrade to the latest ASA and ASDM versions.

    Doing it via TFTP gave read-only errors, or no message at all but a failed copy, and doing it via ASDM just reported ‘error code 400’ which was fairly meaningless.

    Running that fsck has fixed it, so glad to have found this post, thanks.

    • 

      Thanks Ben, Glad it helped! Take care

11. 

    Super..I was having this issue and ur write up nailed it..

    By any chance is there any expalnation of the issue and its soln??

    I was haivng this issue only wen both the FWs were in failover mode.

    If the standby went down, I could wr mem on pri..

    Now I am able to do wen both are up…

12. 

    It works perfectly! Thank you very much.

Topics

• Career (20)
• Certification (38)
  • CCENT (3)
  • CCIE (2)
  • CCNA (12)
  • CCNP (4)
  • Juniper (4)
• Cisco Auctions (14)
• Commentary (30)
• Configuration Tips (97)
  • Firewalls (7)
  • Network Security (13)
  • Routing (34)
  • Switching (9)
  • Wireless Networking (4)
• Engineer Tools (18)
• ICND1 (12)
• Learn (2)
• Network Fundamentals (37)
• Reviews (35)
  • Books (1)
  • Cisco Reviews (3)
  • Juniper Networks (2)
• Top (1)

Recommended

Popular articles

• 3 SD-WAN Problems To Watch Out For

• Code a Game With Almost Zero Coding Skills

• Traceroute Software – The Robust Troubleshooting Tool Your Network Needs!

• Top Challenges for Today’s Network Engineers

• Challenges of Network Monitoring