Steamcmd error app state is 0x202 after update job

0x202 after update job

When I try to install a server for garry’s mod i get this error in the SteamCMD

Login as anonymous instead.

Login as anonymous instead.

Tried that, still does not work. what should i do now?

Tried that, still does not work. what should i do now?

Can you explain how it doesn’t work?

Can you explain how it doesn’t work?

it shows the same error

Doesn’t make sense, because I just tested it myself and it’s working fine.

it shows the same error

Doesn’t make sense, because I just tested it myself and it’s working fine.

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂

Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK

Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.

mine dosent work

Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK

Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂

Источник

0x202 after update job

I have two very similar servers running on different VPS, one stopped working out of nowhere and I’m unable to validate or update. This is what it looks like:

Update state (0x5) validating, progress: 71.76 (9970874103 / 13894659087)
Update state (0x5) validating, progress: 73.02 (10146019508 / 13894659087)
Update state (0x5) validating, progress: 74.34 (10329975632 / 13894659087)
Update state (0x5) validating, progress: 76.54 (10634480976 / 13894659087)
Update state (0x5) validating, progress: 77.73 (10799672719 / 13894659087)
Update state (0x5) validating, progress: 78.94 (10968286289 / 13894659087)
Update state (0x5) validating, progress: 80.14 (11135051356 / 13894659087)
Update state (0x5) validating, progress: 81.23 (11285937125 / 13894659087)
Update state (0x5) validating, progress: 82.26 (11429820353 / 13894659087)
Error! App ‘740’ state is 0x202 after update job.»

I’ve never had a server stop working like that without an update or anything so I was curious if anyone had something similar. I suspect maybe there’s an HDD issue on the host’s side?

Edit:
Maybe this can help?

applicationmanager.cpp (1106) : Assertion Failed: Failed to write app state file /home/steam/servers/2/steamapps/appmanifest_740.acf
applicationmanager.cpp (861) : Assertion Failed: m_bStateChangesSavedToDisk

Edit2:
After deleting the steamapps folder there is no more error and it now downloading, something was probably corrupted but I am now getting:

Источник

0x202 after update job

I have two very similar servers running on different VPS, one stopped working out of nowhere and I’m unable to validate or update. This is what it looks like:

Update state (0x5) validating, progress: 71.76 (9970874103 / 13894659087)
Update state (0x5) validating, progress: 73.02 (10146019508 / 13894659087)
Update state (0x5) validating, progress: 74.34 (10329975632 / 13894659087)
Update state (0x5) validating, progress: 76.54 (10634480976 / 13894659087)
Update state (0x5) validating, progress: 77.73 (10799672719 / 13894659087)
Update state (0x5) validating, progress: 78.94 (10968286289 / 13894659087)
Update state (0x5) validating, progress: 80.14 (11135051356 / 13894659087)
Update state (0x5) validating, progress: 81.23 (11285937125 / 13894659087)
Update state (0x5) validating, progress: 82.26 (11429820353 / 13894659087)
Error! App ‘740’ state is 0x202 after update job.»
I’ve never had a server stop working like that without an update or anything so I was curious if anyone had something similar. I suspect maybe there’s an HDD issue on the host’s side?

Edit:
Maybe this can help?

applicationmanager.cpp (1106) : Assertion Failed: Failed to write app state file /home/steam/servers/2/steamapps/appmanifest_740.acf
applicationmanager.cpp (861) : Assertion Failed: m_bStateChangesSavedToDisk

Edit2:
After deleting the steamapps folder there is no more error and it now downloading, something was probably corrupted but I am now getting:

Steam>app_update 740 validate
Update state (0x1) running, progress: 100.00 (6540282208 / 6540282208)
Error! App ‘740’ state is 0x602 after update job.

Источник

Name already in use

LinuxGSM-Docs / steamcmd / errors.md

• Go to file T
• Go to line L
• Copy path
• Copy permalink

Copy raw contents

Copy raw contents

SteamCMD can sometimes output errors when something goes wrong. Sadly Valve has never released an official list of what the error messages mean. Because of this, a lot of guesswork has been needed to figure it out. This page will highlight what we already know and info on researching what the error might mean in the hope that you can contribute to understanding SteamCMD errors.

SteamCMD uses hexadecimal numbers to give its current «state». Every time SteamCMD does something it changes its state. When SteamCMD fails it will output its has hexadecimal state, for example 0x202 .

Seems to affect HLDS based servers. Running again often fixes the issue

Not enough disk space.

<% hint style=»info» %>Unknown error, if you have any details please let us know

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

Not enough disk space.

Connection issue with steam, you will need to wait for the steam servers to recover.

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

<% hint style=»info» %>Unknown error, if you have any details please let us know

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

SteamCMD is unable to write to the disk. Normally caused by permissions issues. This issue was discovered when a directory that was linked using symlink did not have the correct permissions to allow SteamCMD to write to it.

<% hint style=»warning» %>Missing content_log.txt if you have it please let us know.

No connection to content servers.

To get more info and output see the SteamCMD logs in

/.steam/logs . The most useful log is content_log.txt that will provide more information on errors.

<% hint style=»success» %>If you have experienced an error we don’t have logs for please provide them to us to assist in diagnosing the issue.

SteamCMD Hex Codes

SteamCMD uses hex error codes such as 0x202 which can be converted into decimal 514 . You can use a hex-to-decimal converter to do this. Using the table below you can work out the status messages. By doing a calculation. Find the highest number below the state 512 which is the first error. Then take the number away from the total 514-512=2 which gives you the last error. This can be done for any error

512 StateUpdateRunning , 2 StateUpdateRequired

This table is from 2015 and is probably outdated now but it’s the best we currently have.

ulimit SteamCMD startup error

Some users may get a ulimit error (no permission/cannot open file) while SteamCMD is starting up. This error caused by a low setting of the -n parameter (number of file descriptors) of ulimit. Some servers forbid increasing ulimit values after startup (or beyond a limit set by root). This can be fixed by changing the file descriptor number ulimit:

ERROR! Failed to install app » (No subscription)

The Steam account being used does not have a license for the required game.

ERROR! Password check for AppId returned error Failure.

The password for the branch is incorrect.

[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.

Ignore the error, do not do anything to attempt to fix it. It is a known error that has appeared ever since SteamPipe was introduced. It does not cause any issues and can be ignored.

Loading Steam API. Failed to init SDL priority manager: SDL not found

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

CWorkThreadPool: work processing queue not empty: 2 items discarded.

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

Failed to set thread priority: per-thread setup failed

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

Источник

Error failed to install app 240 no subscription

So after the new steampipe updates It’s led me to ‘steamCMD’ to install/update my server. Problem is if I type «240» I get the actual counter-strike source GAME rather than the SERVER.

So what’s the appID for the actual server?

I am having a similar issue updating my CSS server, but the error is different. The following happens;
Initial App state (0x2) update required
App state (0x10102) reconfiguring, progress: 0.00 (0 / 0)
App state (0x10102) reconfiguring, progress: 0.00 (0 / 0)
Error! App ‘232330’ state is 0x1 after update job.

My update script is as follows;
«c:srcdssteamcmd.exe» +login anonymous +app_update 232330 +quit

What am I missing?

For those still having issues installing, try this:

app_update 232330 validate

It worked for me atleast it got rid of all the problems I had.

C:UsersAdministratorDesktopSteam>steamcmd.exe +login anonymous
Redirecting stderr to ‘C:UsersAdministratorDesktopSteamlogsstderr.txt’
Looks like steam didn’t shutdown cleanly, scheduling immediate update check
[] Checking for available updates.
[—-] Verifying installation.
Steam_: BugslayerUtil.DLL not found
Steam Console Client (c) Valve Corporation
— type ‘quit’ to exit —
Loading Steam3. OK.
Loading Steam2. OK.

Connecting anonymously to Steam Public. Success.

Steam>app_update 232330 validate
Initial App state (0x2) update required
App state (0x10102) reconfiguring, progress: 0.00 (0 / 0)
App state (0x80102) preallocating, progress: 33.40 (755053468 / 2260486941)

And it did finish before someones asks, I didn’t want to post an extremely long log.

Источник

Error failed to install app 240 no subscription

When I try to install a server for garry’s mod i get this error in the SteamCMD

Login as anonymous instead.

Login as anonymous instead.

Tried that, still does not work. what should i do now?

Tried that, still does not work. what should i do now?

Can you explain how it doesn’t work?

Can you explain how it doesn’t work?

it shows the same error

Doesn’t make sense, because I just tested it myself and it’s working fine.

it shows the same error

Doesn’t make sense, because I just tested it myself and it’s working fine.

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂

Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK

Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.

mine dosent work

Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK

Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂

Источник

Error failed to install app 240 no subscription

1. Заработать много денег
2. Организовать свою крупную хостинговую фирму.
3. Выслать письмо с планом хостинга и соглашением на имя Garry Newman или на адресс Facepunch Studios
4. Дождаться ответа
5. В ответе узнать код доступа для скачивания Dedicated сервера
6. Установить SteamCMD на сервер
7. Ввести код доступа для скачивания и скачать сервер.
8. Запустить сервер.

Все очень просто не правда ли?

Ну да .
Только вот сейчас около 1к серверов
что то подсказывает что есть ешё один способ

Видно ешё оди тк вчера видел как школьник бегал по серверу и рекламил свой сервер с 5 0 слотами

1. Заработать много денег
2. Организовать свою крупную хостинговую фирму.
3. Выслать письмо с планом хостинга и соглашением на имя Garry Newman или на адресс Facepunch Studios
4. Дождаться ответа
5. В ответе узнать код доступа для скачивания Dedicated сервера
6. Установить SteamCMD на сервер
7. Ввести код доступа для скачивания и скачать сервер.
8. Запустить сервер.

Все очень просто не правда ли?

Ооочень остроумно. Если не считать что он доступен для каждого, по заявлению самого Гарри. И если не тренировать сарказм, то можно ответить человеку, что ошибка ERROR! Failed to install app 258550 (No subscription) появляется когда логинишься в CMD под собственным логпасом. Так что все проще.

1. Открываешь SteamCMD
2. login anonymous
3. app_update 258550 -beta experimental validate
4. Success! App ‘258550’ fully installed.

Источник

ERROR! Failed to install app ‘232250’

TrojanCS

Участник

KorDen

Atra esterní ono thelduin!

TrojanCS

Участник

The Night Fury

Участник

Буквально только что обновил. Без проблем запустилось.

Сюда логи скинь, раз на то пошло.

fuck society

TrojanCS, так же

Добавлено через 47 минут

Николай Головин

Участник

Охххохохо! Спасибо, мужики, под действующим логином качать не хотело(речь о ТФе), а вот под анонимусом(ты велик и могуч чувак, жаль не встретимся, пива бы поставил) начало качать! 🙂

Для простоты сделал себе батники с параметрами и запускал их; КСГО под активным акком скачался нормально, а вот ТФ так не смог — ошибка отсутствия описания — «(No subscription)». Второй батник написал от имени великого и могучего — сразу зацепилось и приступило качать.

До этого находил(для Win-базированных систем) настройки эксплорера поправить, не помогало.

Почему батником в итоге? Потому как если все те действия, которые я записал в него, вводил руками — меня отправляли лесом с ошибками об отсутствии логина или интернет-соединения.

В итоге мои действия, чтобы всё установить(быть может кому поможет, сразу пишу без ошибок):

-создал папку на D: , скажем Dserver и закинул в неё steamcmd.exe
-запустил его, после чего он начал выкачивать себе установочные файлы, скачал и запустился с видом как командная строка, единственное отличие был написан не путь профиля, как при запуске cmd, а просто — «Steam>» — вбиваем в него quit для правильного завершения.
-создаём батник(просто текстовый файл с расширением *.bat и желательно имя латиницей дать ему или цифрами) и в него корячим следующий текст(без кавычек):

«.steamcmd.exe +login anonymous +force_install_dir d:dserverПАПКА_СЕРВЕРА +app_update ИД_НАШЕЙ_ИГРЫ validate«

ПАПКА_СЕРВЕРА — на ваше усмотрение 😉
ИД_НАШЕЙ_ИГРЫ — на страничке вики Вэлв

Источник

Name already in use

LinuxGSM-Docs / steamcmd / errors.md

• Go to file T
• Go to line L
• Copy path
• Copy permalink

Copy raw contents

Copy raw contents

SteamCMD can sometimes output errors when something goes wrong. Sadly Valve has never released an official list of what the error messages mean. Because of this, a lot of guesswork has been needed to figure it out. This page will highlight what we already know and info on researching what the error might mean in the hope that you can contribute to understanding SteamCMD errors.

SteamCMD uses hexadecimal numbers to give its current «state». Every time SteamCMD does something it changes its state. When SteamCMD fails it will output its has hexadecimal state, for example 0x202 .

Seems to affect HLDS based servers. Running again often fixes the issue

Not enough disk space.

<% hint style=»info» %>Unknown error, if you have any details please let us know

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

Not enough disk space.

Connection issue with steam, you will need to wait for the steam servers to recover.

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

<% hint style=»info» %>Unknown error, if you have any details please let us know

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

SteamCMD is unable to write to the disk. Normally caused by permissions issues. This issue was discovered when a directory that was linked using symlink did not have the correct permissions to allow SteamCMD to write to it.

<% hint style=»warning» %>Missing content_log.txt if you have it please let us know.

No connection to content servers.

To get more info and output see the SteamCMD logs in

/.steam/logs . The most useful log is content_log.txt that will provide more information on errors.

<% hint style=»success» %>If you have experienced an error we don’t have logs for please provide them to us to assist in diagnosing the issue.

SteamCMD Hex Codes

SteamCMD uses hex error codes such as 0x202 which can be converted into decimal 514 . You can use a hex-to-decimal converter to do this. Using the table below you can work out the status messages. By doing a calculation. Find the highest number below the state 512 which is the first error. Then take the number away from the total 514-512=2 which gives you the last error. This can be done for any error

512 StateUpdateRunning , 2 StateUpdateRequired

This table is from 2015 and is probably outdated now but it’s the best we currently have.

ulimit SteamCMD startup error

Some users may get a ulimit error (no permission/cannot open file) while SteamCMD is starting up. This error caused by a low setting of the -n parameter (number of file descriptors) of ulimit. Some servers forbid increasing ulimit values after startup (or beyond a limit set by root). This can be fixed by changing the file descriptor number ulimit:

ERROR! Failed to install app » (No subscription)

The Steam account being used does not have a license for the required game.

ERROR! Password check for AppId returned error Failure.

The password for the branch is incorrect.

[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.

Ignore the error, do not do anything to attempt to fix it. It is a known error that has appeared ever since SteamPipe was introduced. It does not cause any issues and can be ignored.

Loading Steam API. Failed to init SDL priority manager: SDL not found

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

CWorkThreadPool: work processing queue not empty: 2 items discarded.

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

Failed to set thread priority: per-thread setup failed

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

Источник