Содержание
- While executing query in BEX analyser shows syntax error in program SAPLXRSR
- Syntax error in program — after EHP5 upgrade
- Syntax error in program «SAPLMR1M
- Syntax error in program «CL_HTTP_SERVER=CP » after EHP4 Upgrade
- Syntax error in program «CL_HTTP_SERVER=CP » after EHP4 Upgrade
While executing query in BEX analyser shows syntax error in program SAPLXRSR
When i login into SAP 7.3 and process Bex analyser t-code and login again
I am trying to execute query that shows below error —
«An error occured while communicating with BW server
As a result of this error , system has been disconnected from BW server
Syntax error in program SAPLXRSR»
System into which i logged in is BI and when i run t code for bex analyser i select this same system with same SID and hostname.
I have checked internal RFC for BI and its connection test is successful.
What could be next step .
Few lines from ST22 dumps —
Error in the ABAP Application Program
The current ABAP program «CL_RSROA_SMOD_COMP_MEDIATOR===CP» had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
In include «ZXRSRU01 «, in line 125 of program
«SAPLXRSR «, the following syntax errors
«VANYOMESFIN» cannot be converted to the line type of «I_T_VAR_RANGE».
Author and last person to change the include are:
Last changed by «Sxxxxx «
What can you do?
Correct the error by running a syntax check (or extended program check)
on program «SAPLXRSR «. You can also run the
syntax check from the ABAP
If the problem persists, proceed as follows:
The following syntax error has occurred in program SAPLXRSR
«VANYOMESFIN» cannot be converted to the line type of «I_T_VAR_RANGE».
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself, please send the following
information to SAP:
1. This description of the problem (short dump)
To do this, choose System -> List -> Save -> Local File (unconverted)
on the screen you are in now.
2. A suitable system log
To do this, call the system log in transaction SM21. Restrict the time
interval to ten minutes before the short dump and five minutes after
it. In the display, choose System -> List -> Save -> Local File
3. If these are programs of your own, or modified SAP programs: Source
code of these programs
To do this, choose More Utilities -> Upload/Download -> Download in
4. Details regarding the conditions under which the error occurred or
which actions and input caused the error.
User and Transaction
Transaction ID. 8C4720E38F3CF19894E800155DC31D04
EPP whole context ID.
EPP connection ID.
EPP call counter. 0
Screen. SAPMSSY1 3004
Active debugger. «none»
Server-Side Connection Information
Information on caller of Remote Function Call (RFC):
Database Release. 720
Kernel Release. 720
Connection type. «E» (2=R/2, 3=ABAP-System, E=External,
R=Reg.External) call type. synchronous and non-transactional (emode 0,
Inbound Queue Name.
Outbound Queue Name..
Call program. designer
Function module. BAPI_MDPROVIDER_GET_DIMENSIONS
Source server. DMZSV709
Source IP address.. 212.190.195.109
Additional information on RFC logon:
Logon return code. 0
Trusted return code.. 0
— In all releases prior to 4.0, no information is provided about the
— The installation number is provided in caller Release 700 and higher.
Источник
Syntax error in program — after EHP5 upgrade
Started short dumping after EHP5 upgrade, for example dump creates when saving a user in SU01.
Here’s the dump result
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_IM_CVI_ADDRESS_UPD_IMPL====CP
Application Component AP-MD-BF-SYN
Date and Time 08/21/2012 15:34:19
Short text
Syntax error in program «CL_IM_CVI_ADDRESS_UPD_IMPL====CP «.
What happened?
Error in the ABAP Application Program
The current ABAP program «CL_EXIT_MASTER================CP» had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
«CL_IM_CVI_ADDRESS_UPD_IMPL====CP » in include
«CVI_EI_API_MAP_STRUCTURE======CU » in
line 22:
«Unspecified syntax error»
» »
» »
» «
The include has been created and last changed by:
Created by: «SAP »
Last changed by: «SAP »
Error in the ABAP Application Program
The current ABAP program «CL_EXIT_MASTER================CP» had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program «CL_IM_CVI_ADDRESS_UPD_IMPL====CP
«.
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Источник
Syntax error in program «SAPLMR1M
We are getting error while we hit MIRO.
We are having SAPBASIS 702 SP8
EA-APPL 605 SP5
Kernal 720_EXT_REL and patch no 401
We get the Below dump.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program SAPLMR1M
Application Component MM-IV
Syntax error in program «SAPLMR1M «.
Error in the ABAP Application Program
The current ABAP program «. » had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program «SAPLMR1M » in include «LMR1MP15
«The column name «MATNR» is ambiguous»
The include has been created and last changed by:
Last changed by: «SAP «
Error in the ABAP Application Program
The current ABAP program «. » had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program «SAPLMR1M «.
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
The following syntax error was found in the program SAPLMR1M :
«The column name «MATNR» is ambiguous»
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose «System->List->Save->Local File
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose «System->List->Save->Local File
Источник
Syntax error in program «CL_HTTP_SERVER=CP » after EHP4 Upgrade
Iam getting ABAP dumps after upgrading my system to EHP4 Windows ABAP+JAVA stack,
Syntax error in program «CL_HTTP_SERVER================CP «.
Error in the ABAP Application Program
The current ABAP program «SAPLHTTP_RUNTIME» had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
«CL_HTTP_SERVER================CP » in include
«Field «C_IS_SHOW_SERVER_HEADER» is unknown. It is neither in one of th»
«e specified tables nor defined by a «DATA» statement. .»
The include has been created and last changed by:
Last changed by: «SAP «
Error in the ABAP Application Program
The current ABAP program «SAPLHTTP_RUNTIME» had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program «CL_HTTP_SERVER================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
The following syntax error was found in the program
«Field «C_IS_SHOW_SERVER_HEADER» is unknown. It is neither in one of th»
«e specified tables nor defined by a «DATA» statement. .»
Источник
Syntax error in program «CL_HTTP_SERVER=CP » after EHP4 Upgrade
Iam getting ABAP dumps after upgrading my system to EHP4 Windows ABAP+JAVA stack,
Syntax error in program «CL_HTTP_SERVER================CP «.
Error in the ABAP Application Program
The current ABAP program «SAPLHTTP_RUNTIME» had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
«CL_HTTP_SERVER================CP » in include
«Field «C_IS_SHOW_SERVER_HEADER» is unknown. It is neither in one of th»
«e specified tables nor defined by a «DATA» statement. .»
The include has been created and last changed by:
Last changed by: «SAP «
Error in the ABAP Application Program
The current ABAP program «SAPLHTTP_RUNTIME» had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program «CL_HTTP_SERVER================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
The following syntax error was found in the program
«Field «C_IS_SHOW_SERVER_HEADER» is unknown. It is neither in one of th»
«e specified tables nor defined by a «DATA» statement. .»
Источник
| Автор | Сообщение | ||
|---|---|---|---|
|
Заголовок сообщения: Syntax error in program SAPLXRSR
|
|||
|
Всем привет.
Первый раз вижу такую ошибку и прошу помощи. Вот еще что пишет:
The termination type was: RABAX_STATE Заранее спасибо
|
||
| Вернуться к началу |
|
||
 |
Добавлено: Чт, окт 04 2007, 18:11 
|
Blizzard |
Заголовок сообщения:
|
|
|
…а это…с переходами ничего не делали? Похоже что активировали экзит к RRI…и там что-то криво…
|
| Вернуться к началу |
|
|
|
EvgenySA |
Заголовок сообщения:
|
||
|
Интересно. RRI это Report to Report Interface, а RSR_OLAP_BADI это виртуальные признаки показатели, странный симптом. Можно дампа побольше?
|
||
| Вернуться к началу |
|
||
|
|
Annkathrin |
Заголовок сообщения:
|
||
|
Error Group RFC_ERROR_SYSTEM_FAILURE Message Syntax error in program SAPLXRSR
|
||
| Вернуться к началу |
|
||
|
|
EvgenySA |
Заголовок сообщения:
|
||
|
Annkathrin написал(а): Error Group RFC_ERROR_SYSTEM_FAILURE Message Syntax error in program SAPLXRSR Всё чудесатей и чудесатей. Посмотрите не внедрял ли кто этот RSR_OLAP_BADI.
|
||
| Вернуться к началу |
|
||
|
This type of error happens when you try to import a transport to an SAP Environment. You will most likely see a Return Code “8”, the statement “Only generates programs with LOAD versions”, and the following generic logs below.
###################################### Generation of programs and screens Transport request : XXXXXXXXXX System : XXQ tp path : tp Version and release: 123.12.12 111 Generation of programs and screens for transport request XXXXXXXXXX Only generates programs with LOAD versions Start on DD.MM.YY at HH:MM:SS
This post will help you trace the error and provide guidance on the solution.
SOLUTION for Only generates programs with LOAD versions
This type of error happens during a transport import step and the usual root cause lies on the ABAP code. In this post, we will first try to simulate an example and go through the steps you can do to find the issue.
1. Go to Transaction Code STMS and click on the Truck Button (Import Overview)
2. Select or double click on the concerned import queue. For this example, I selected the dark blue masked row.
3. Locate the concerned SAP Transport Number. Feel free to filter out the selection as needed.
4. Select the concerned transport request row and click on the Truck Button (Import Request Button).
There is another truck button but be cautious in the selection. One will import all requests while the other one will import only the selected request.
5. Import the transport immediately by selecting that option and then click on the Check Button.
Some of you may have the Invalid Component Version status icon. If so, you can go to the Options Tab and select “Ignore Invalid Component Version”.
Now we can see that the transport we tried to import is in Red status with return code 8.
6. Double click on the affected RC status or highlight the row and click on the Logs Button.
7. You will now see the concerned logs. Focus on the entries with the lines highlighted in red and double click on it.
In our example, we are focusing on the “Generation of Programs and Screens” line.
You should now be in the Log Display screen. We can see the generic log text saying “Only generated programs with LOAD versions” but this information is too generic for us to analyze.
8. As such, you need to click on the Expand Button to see more line items.
Now we see there are more details for us to analyze the issue. In most cases, this error involves the ABAP code. By analyzing the details below we can determine that the error is notifying us on a syntax error in the program.
9. To validate the error found, go to TCode SE38, Enter the concerned Program, and Click on the Check Button.
You should now see the errors associated with the program. In this example, we can see there is a syntax issue.
10. To get more details on the ABAP program check results, Double click on the reported line error.
You should be directed to the line of code containing the syntax error.
11. The next step is to discuss the issue with the assigned / owning ABAP developer to assist with the error. The code should be modified and corrected. Once corrected and transport is ready, you can re-perform the transport import.
For additional information, you can refer to this SAP Note: Error in the “Generation of Programs and Screens” import step.
I hope this helps. Good luck! 😊