Systemd failed to execute command exec format error

Hey guys!

After reading several threads and trying several things I still cannot get a custom service to start at boot. I need help.

Here is the story.

I want to delay some services at boot in order to decrease the boot time. So I made this (my first!) script

#!/bin/bash

#This script will run 3 sec after boot

 systemctl start dnsmasq.service &&
 systemctl start squid.service &&
 systemctl start squid-rotate.service

I tried putting the script in /usr/bin and in /usr/local/bin. It runs (manually) fine from either.

After that I created a service

[Unit]
Description=bootscript

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/bootscript

I tried adding

as well as changing the type to

After that I created a timer

[Unit]
Description=Runs bootscript at boot

[Timer]
# Time to wait after booting before activation
OnBootSec=3sec
Unit=bootscript.service

[Install]
WantedBy=multi-user.target

Then

systemctl enable bootscript.timer

And after a reboot I have no internet connection. I have to manually run the script in order to start the services.

Script is executable

chmod +x /usr/bin/bootscript

Here is the output

ctl status bootscript.service
● bootscript.service - bootscript
   Loaded: loaded (/etc/systemd/system/bootscript.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Thu 2017-11-30 21:33:22 EET; 3s ago
  Process: 1120 ExecStart=/usr/bin/bootscript (code=exited, status=203/EXEC)
 Main PID: 1120 (code=exited, status=203/EXEC)

Nov 30 21:33:22 ahp systemd[1]: Started bootscript.
Nov 30 21:33:22 ahp systemd[1120]: bootscript.service: Failed to execute command: Exec format error
Nov 30 21:33:22 ahp systemd[1120]: bootscript.service: Failed at step EXEC spawning /usr/bin/bootscript: Exec format error
Nov 30 21:33:22 ahp systemd[1]: bootscript.service: Main process exited, code=exited, status=203/EXEC
Nov 30 21:33:22 ahp systemd[1]: bootscript.service: Failed with result 'exit-code'.

ctl status bootscript.timer
● bootscript.timer - Runs bootscript at boot
   Loaded: loaded (/etc/systemd/system/bootscript.timer; enabled; vendor preset: disabled)
   Active: active (elapsed) since Thu 2017-11-30 21:27:11 EET; 27min ago
  Trigger: n/a

Nov 30 21:27:11 ahp systemd[1]: Started Runs bootscript at boot.

How to proceed to make it work?
Thank you in advance!

Last edited by amaro (2017-12-03 12:10:28)

Почему не работает созданная служба systemd?

Здравствуйте.
Появиласть необходимость запускать программу при загрузке системы и перезапускать в случае её закрытия или краха. Debian 8.1 располагает для этого инстументом systemd.
Был создан юнит с именем dts.service

Который запускает следующий скрипт /home/dts/bin/dts-service.sh

При выполнении этот скрипт запускает программу khconsole которая должна все время работать если она закрылась или повисла то systemd должен перезапустить её.

Проблема в следующем:
Отдельно, скрипт отрабатывает корректно. При попытке запуска через systemd получаю следующий результат
Job for dts.service failed. See ‘systemctl status dts.service’ and ‘journalctl -xn’ for details.

Результат systemctl status dts.service
dts.service — DTS deamon
Loaded: loaded (/etc/systemd/system/dts.service; enabled)
Active: failed (Result: start-limit) since Пт 2015-09-04 18:27:38 OMST; 28s ago
Process: 1058 ExecStart=/home/dts/bin/dts-service.sh (code=exited, status=203/EXEC)

сен 04 18:27:37 dts systemd[1]: Failed to start DTS deamon.
сен 04 18:27:37 dts systemd[1]: Unit dts.service entered failed state.
сен 04 18:27:38 dts systemd[1]: dts.service start request repeated too quickly, refusing to start.
сен 04 18:27:38 dts systemd[1]: Failed to start DTS deamon.
сен 04 18:27:38 dts systemd[1]: Unit dts.service entered failed state.

Результат journalctl -xn
— Logs begin at Пт 2015-09-04 18:12:17 OMST, end at Пт 2015-09-04 18:27:38 OMST. —
сен 04 18:27:37 dts systemd[1]: dts.service: control process exited, code=exited status=203
сен 04 18:27:37 dts systemd[1]: Failed to start DTS deamon.
— Subject: Ошибка юнита dts.service
— Defined-By: systemd
— Support: lists.freedesktop.org/mailman/listinfo/systemd-devel
—
— Произошел сбой юнита dts.service.
—
— Результат: failed.
сен 04 18:27:37 dts systemd[1]: Unit dts.service entered failed state.
сен 04 18:27:37 dts systemd[1058]: Failed at step EXEC spawning /home/dts/bin/dts-service.sh: Exec format error
— Subject: Не удалось запустить процесс /home/dts/bin/dts-service.sh
— Defined-By: systemd
— Support: lists.freedesktop.org/mailman/listinfo/systemd-devel
—
— Сбой: не удалось запустить процесс /home/dts/bin/dts-service.sh.
—
— Код ошибки: 8.
сен 04 18:27:37 dts systemd[1]: dts.service: control process exited, code=exited status=203
сен 04 18:27:37 dts systemd[1]: Failed to start DTS deamon.
— Subject: Ошибка юнита dts.service
— Defined-By: systemd
— Support: lists.freedesktop.org/mailman/listinfo/systemd-devel
—
— Произошел сбой юнита dts.service.
—
— Результат: failed.
сен 04 18:27:37 dts systemd[1]: Unit dts.service entered failed state.
сен 04 18:27:38 dts systemd[1]: dts.service start request repeated too quickly, refusing to start.
сен 04 18:27:38 dts systemd[1]: Failed to start DTS deamon.
— Subject: Ошибка юнита dts.service
— Defined-By: systemd
— Support: lists.freedesktop.org/mailman/listinfo/systemd-devel
—
— Произошел сбой юнита dts.service.
—
— Результат: failed.
сен 04 18:27:38 dts systemd[1]: Unit dts.service entered failed state.

Не понятно почему служба не стартует, хотя скрипт корректный и не должен завершаться?

Источник

🛠️ Исправление ошибки «Exec format» при запуске скриптов командой run-parts

Решение ошибки «Exec format» при запуске скриптов командой run-parts

Чтобы запустить все скрипты в папке «Documents», я запустил:

Я получил следующее сообщение об ошибке:

Bourne shell, или совместимый шеллl:

Bash:

Perl:

Python 2.x:

Python 3.x:

Это то, что мы называем шебанг.

Теперь вернемся к теме.

Отредактируйте ваши скрипты, используя ваш любимый редактор:

Добавьте шебанг в начале скрипта:

Теперь вы можете без проблем запускать скрипты с помощью команды run-parts, используя команду run-parts.

Вы также можете использовать утилиту ShellCheck для поиска проблем в своих скриптах оболочки.

• Аудит ИБ (49)
• Вакансии (12)
• Закрытие уязвимостей (105)
• Книги (27)
• Мануал (2 234)
• Медиа (66)
• Мероприятия (39)
• Мошенники (23)
• Обзоры (800)
• Обход запретов (34)
• Опросы (3)
• Скрипты (109)
• Статьи (336)
• Философия (99)
• Юмор (18)

Anything in here will be replaced on browsers that support the canvas element

Источник

Arch Linux

You are not logged in.

#1 2012-09-22 22:12:42

[SOLVED]Starup sript not getting executed in systemd

I have a script(rpi_user.sh) which has to be executed every time when I start my computer. But the startup script is not executing. Following are the steps which I have done. I am using systemd. I upgraded my system successfully today.

The script which I wanted to execute was very small and easy. I just creates a new file with the echoed text. Below is my script(rpi_user.sh)
cd /home/pi/
echo Jeffrey > 1

When ever I restart my system, I am not able to see the file ‘1’

I made the startup script(rpi_user.sh) and kept in /usr/bin. Also I followed the instruction in https://wiki.archlinux.org/index.php/Sy … process.3F

Below shown in my service file (rpi_user.service)
[Unit]
Description=rpi_user

After creating rpi_user.sh, I executed the following command to make the file executable — chmod +x rpi_user.sh

Once completing these steps, I executed the following commands (I got these info from http://forum.teamspeak.com/showthread.p … up-script)
# systemctl —system daemon-reload
# systemctl start rpi_user.service
# systemctl enable rpi_user.service
# systemctl status rpi_user.service

But things didn’t go fine. When I ran «systemctl status rpi_user.service», I got the following error

rpi_user.service — rpi_user
Loaded: loaded (/etc/systemd/system/rpi_user.service; enabled)
Active: failed (Result: exit-code) since Sun, 23 Sep 2012 03:29:08 +0530; 1min 33s ago
Main PID: 247 (code=exited, status=203/EXEC)
CGroup: name=systemd:/system/rpi_user.service

Sep 23 03:29:08 alarmpi systemd[247]: Failed at step EXEC spawning /usr/bin/rpi_user.sh: Exec format error

Could anyone of you answer the following questions.
1) Is there any thing wrong which I have done ? Is this the way to create startup scripts ?
2) Could you help me in fixing the issue — how can I make my starup script run ?

Thanks and Best Regards,
Jeffrey Antony
www.jeffrey.co.in

Last edited by Jayfree (2012-09-23 10:31:43)

Источник

Arch Linux

You are not logged in.

#1 2013-08-20 09:28:25

Failed load Kernel Modules | fglrx exec Format Error

after I started my computer this morning it won’t load fglrx anymore.
Yesterday everything worked just fine. But I can still start the xserver without any problem.

systemctl status systemd-modules-load.serivce outputs:

systemd-modules-load.service — Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Tue 2013-08-20 10:59:28 CEST; 20min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 113 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)

Aug 20 10:59:28 orz-aa-0 systemd-modules-load[113]: Failed to insert ‘fglrx’: Exec format error
Aug 20 10:59:28 orz-aa-0 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Aug 20 10:59:28 orz-aa-0 systemd[1]: Failed to start Load Kernel Modules.
Aug 20 10:59:28 orz-aa-0 systemd[1]: Unit systemd-modules-load.service entered failed state.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.

and modprobe fglrx outputs:

modprobe: ERROR: could not insert ‘fglrx’: Exec format error

Installed are:
catalyst 13.8-1
catalyst-utils 13.8-1
lib32-catalyst-utils 13.8-1
xorg-bdftopcf 1.0.4-1
xorg-font-util 1.3.0-1
xorg-font-utils 7.6-3
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-3
xorg-fonts-misc 1.0.1-2
xorg-luit 1.1.1-1
xorg-mkfontdir 1.0.7-1
xorg-mkfontscale 1.1.1-1
xorg-server 1.14.2-2
xorg-server-common 1.14.2-2
xorg-setxkbmap 1.3.0-1
xorg-twm 1.0.7-1
xorg-xauth 1.0.7-1
xorg-xclock 1.0.6-1
xorg-xhost 1.0.6-1
xorg-xinit 1.3.2-3
xorg-xkbcomp 1.2.4-1
xorg-xmodmap 1.0.7-1
xorg-xrdb 1.0.9-2
xorg-xset 1.2.2-2

I’m really a newbie to arch linux and would appreciate any help.
Thanks in advance.

Last edited by surrz (2013-08-20 10:53:28)

Источник

/bin/bash: Exec format error

I have a weird issue on an Ubuntu 10.04 LTS virtual server. A few days ago I started getting these alerts:

Now logging in to the server does not work. It seems like I am able to authenticate with ssh but then seems to fail at getting a prompt. I get:

I can’t login from any account. Can’t try single user as it is remotely hosted. I can connect without starting a shell using ssh -N.

I’ve received this from cron. It seems like all my /bin files are gone. Is there any way to recover?

Any help would be greatly appreciated.

2 Answers 2

Can you login to a different account (if one exists)? Can you login to the console? Or reboot in single user mode and login? Can you connect with something like WinSCP, which shouldn’t start a shell?

That error may mean you have a bad login script.

It could also mean that bash has been replaced with a corrupt or different architecture’s bash, which might be a sign that someone tried to install a rootkit.

That paste looks like severe filesystem corruption.

At this point, were it my server, I would:

• Check the disks for hardware failure and replace any disk that has failed, is failing, or even looks like it might fail in the near future.
• Reinstall the OS and restore my data from the most recent good backup, checking them carefully to ensure that I’m not restoring corrupt data. This could have been going on for quite a long time without your knowledge, so check your backup carefully before restoring it.

Источник

[Edit: people told me to add shebang. Did that, now error is different:

● listener_search_service.service - Server_Swap_Scanner_Listener
     Loaded: loaded (/etc/systemd/system/listener_search_service.service; static; vendor preset: enabled)
     Active: failed (Result: exit-code) since Thu 2022-02-24 14:21:08 UTC; 12s ago
    Process: 4192 ExecStart=/home/letmein/service_files/SwapSearchService/ServerListener.py (code=exited, status=203/EXEC)
   Main PID: 4192 (code=exited, status=203/EXEC)

Feb 24 14:21:08 TradePathScanService systemd[1]: Starting Server_Swap_Scanner_Listener...
Feb 24 14:21:08 TradePathScanService systemd[1]: listener_search_service.service: Main process exited, code=exited, status=203/EXEC
Feb 24 14:21:08 TradePathScanService systemd[1]: listener_search_service.service: Failed with result 'exit-code'.
Feb 24 14:21:08 TradePathScanService systemd[1]: Failed to start Server_Swap_Scanner_Listener.

]

Hello dear people. I’m trying to execute my py script via script in my Ubunto server. And I’m facing the «Exec format error» now.

Error:

Feb 24 10:54:46 TradePathScanService systemd[1]: Starting Server_Swap_Scanner_Listener...
Feb 24 10:54:46 TradePathScanService systemd[3402]: listener_search_service.service: Failed to execute command: Exec format error
Feb 24 10:54:46 TradePathScanService systemd[3402]: listener_search_service.service: Failed at step EXEC spawning /home/letmein/service_files/SwapSearchService/ServerListener.py: Exec format error
Feb 24 10:54:46 TradePathScanService systemd[1]: listener_search_service.service: Main process exited, code=exited, status=203/EXEC
Feb 24 10:54:46 TradePathScanService systemd[1]: listener_search_service.service: Failed with result 'exit-code'.
Feb 24 10:54:46 TradePathScanService systemd[1]: Failed to start Server_Swap_Scanner_Listener.

Service file:

[Unit]
Description=Server_Swap_Scanner

[Service]
User=root
Type=oneshot
WorkingDirectory=/home/letmein/service_files/SwapSearchService
ExecStart= /home/letmein/service_files/SwapSearchService/ServerServices/bsc_full_scan.py
Restart=on-failure

[Install]
WantedBy=multi-user.target

Can anyone shed some light?