Task scheduler failed to start additional data error value 2147943645

Планировщик заданий Windows Server 2008. Ошибка 2147943645 ­ Дневник ­ Максим Боголепов

Планировщик заданий Windows Server 2008. Ошибка 2147943645

В “Планировщике задач” на сервере под управлением Windows Server 2008 R2 Standard x64 была создана задача резервного копирования бекапов баз 1С (MS SQL ) на сетевое хранилище. Задание выполнялось от имени администратора домена. Данная задача прерывалась следующей ошибкой:

Полностью данное событие выглядит так:

Вид ошибки (нажмите для увеличения):

Как оказалось, в данной операционке все запланированные задания по умолчанию выполняются от имени зарегистрированного в системе пользователя, т.е. в момент ее выполнения, он должен быть “залогинен”. Чтобы устранить это досадное недоразумение, необходимо в свойствах задания выставить параметры:

1. Выполнять вне зависимости от регистрации пользователя;
2. Выполнить с наивысшими правами.

Данные установки можно сделать, открыв “Планировщик заданий”. Далее необходимо раскрыть “Библиотеку планировщика заданий” и вызвать свойства нужной вам задачи:

Далее ставьте галочки напротив необходимых параметров и наживайте “ОК”:

После этого операционная система запросит пароль на учетную запись, от имени которой вы хотите запустить настраиваемую задачу.

После проделанных операций запланированное задание выполнялось без ошибок.

Изначально решение проблемы нашел тут.

Rating: 4.8/5(15 votes cast)

Источник

Task scheduler failed to start additional data error value 2147943645

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

We have a task scheduler that is not lauching on client machines. The following error is is found in the event properties of task scheduler:

Task Scheduler failed to start «Update TFS» task for user «BUILTINBUILTIN». Additional Data: Error Value: 2147943645.

The following messages are displayed in the events viewer:

Warning:

Task Scheduler did not launch task «» because user «BUILTINBUILTIN» was not logged on when the launching conditions were met. User Action: Ensure user is logged on or change the task definition to allow launching when user is logged off.

Error:

Task Scheduler failed to start Task Engine «» process due to an error occurring in «LUAIsElevatedToken» . Command=»taskeng.exe» . Additional Data: Error Value: 2147943645.

Error:

Task Scheduler failed to start «Update TFS» task for user «BUILTINBUILTIN». Additional Data: Error Value: 2147943645.

Our network administrator setup this scheduler for the user, but all of us are getting the same errors. Any ideas as to what maybe wrong?

Источник

Task scheduler failed to start additional data error value 2147943645

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

We have a task scheduler that is not lauching on client machines. The following error is is found in the event properties of task scheduler:

Task Scheduler failed to start «Update TFS» task for user «BUILTINBUILTIN». Additional Data: Error Value: 2147943645.

The following messages are displayed in the events viewer:

Warning:

Task Scheduler did not launch task «» because user «BUILTINBUILTIN» was not logged on when the launching conditions were met. User Action: Ensure user is logged on or change the task definition to allow launching when user is logged off.

Error:

Task Scheduler failed to start Task Engine «» process due to an error occurring in «LUAIsElevatedToken» . Command=»taskeng.exe» . Additional Data: Error Value: 2147943645.

Error:

Task Scheduler failed to start «Update TFS» task for user «BUILTINBUILTIN». Additional Data: Error Value: 2147943645.

Our network administrator setup this scheduler for the user, but all of us are getting the same errors. Any ideas as to what maybe wrong?

Источник

Task scheduler failed to start additional data error value 2147943645

Вопрос

I have a problem with Task Scheduler on my Windows 2008 x64 Server.

The main problem is if I try to create a tasks from the Task Scheduler, when the dropdown box for ‘Configure for’ is selected as «Windows Server 2003, Windows XP, or Windows 2000» — is selected, when I press OK to create the task an error pops up «An error has occurred for task ‘name’, The following error was reported: 2148073494» and the task is not created.

If I select the ‘Configure For’ box as «Windows 2008, Windows Vista etc» it creates fine.

Why this is a problem is I also can’t create scheduled tasks from any programs — ViceVersa or Sophos — both report permissions errors when creating the task. This used to work a few months ago.

I’m guessing this could be due to invalid registry permissions somewhere but I can’t ‘see’ anything wrong. Someone suggested

Any ideas are most welcome.

Thanks in advance 🙂

Ответы

What do you mean by “NB task” that cannot configure for Windows 2003, XP? Can you create the same task in other computers successfully? What task are you trying to create?

Please make sure your task script is not surrounded with quotes in the Program/Script entry of Action tab.

For the other programs, I’m not sure how they work and what kind of permission they need. I suggest you contacting the vendor for further support.

If nothing would work after you’ve tried all that you can think of. I would suggest performing an in-place upgrade to fix the corrupt files if the server is not a DC.

Karen Ji

This posting is provided «AS IS» with no warranties, and confers no rights.

Just an update to this — I finally figured out the problem and fixed it!!

It’s really simple, just go to «C:Documents and SettingsAll UsersMicrosoftCryptoRSA»

RENAME or delete the folder «S-1-5-18»

Try creating a Task -> The problem is now fixed!! You don’t even have to restart the computer, the S-1-5-18 folder is re-created automatically 🙂

Все ответы

If you convert the error code 2148073494 to hexadecimal, it’s 0x80090016, which means keyset does not exist. It occurs because the Protected Storage service is not started. Please start the service by typing net start «protected storage» at a command prompt and see whether the problem goes away.

Additionally, I don’t quite understand your meaning of “ I also can’t create scheduled tasks from any programs” . Could you please provide more information about it?

1. What kind of task do you need to create?

2. Does the user account that the task run as has the local administrator rights?

3. Are there any error logs in the event viewer for the task scheduler? Please post the error here for further troubleshooting.

If you would like to set a task to run a batch job with a non-admin account, please grant user read and execute permissions to Cmd.exe that the batch job runs under. To do this, please follow these steps:

Click Start, and then click Windows Explorer.

Locate and then right-click the Cmd.exe file. The Cmd.exe file is located in the %windir%System32 folder.

Click Properties.

Click the Security tab.

Click Add.

In the Enter the object names to select box, type the user name that the batch job runs under, and then click OK two times.
Note When you add the user, the user is automatically granted Read and Execute permissions.

Click Yes when you are prompted to continue.

Alternatively, you can also grant read and execute permissions for the Cmd.exe file to the Batch group, which permits all batch processes to run the command processor. To do this, please follow the steps below.

Click Start, and then click Windows Explorer.

Locate and then right-click the Cmd.exe file. The Cmd.exe file is located in the %windir%System32 folder.

Click Properties.

Click the Security tab.

Click Add.

In the Enter the object names to select box, type the user name that the batch job runs under, and then click OK two times.
Note When you add the user, the user is automatically granted Read and Execute permissions.

Click Yes when you are prompted to continue.

Karen Ji

This posting is provided «AS IS» with no warranties, and confers no rights.

On July 1st we will be making this forum read only. After receiving a lot of feedback from the community, it was decided that this forum is a duplication and therefore redundant of the General Forum. So, until July 1st, we will start asking customers to redirect their questions to the General Forum. On June 11th, CSS engineers will move any new threads to the General Forum.

Please post a reply to the announcement thread if you have any feedback on this decision or the process. You can also email WSSDComm@microsoft.com .

Thanks for your reply.

Unfortunately the protected storage service was already started, I tried restarting it but it made no difference. I also checked that it was running under the Local System account but that did not make any difference.

I tried changing the permissions of cmd.exe to everyone but this didn’t make any difference either — I can’t even CREATE the task yet alone run one.

NB task creation works fine when i select Configure for: Windows 2008 etc.. but when I select Configure For: Windows 2003, Windows XP thats when it fails to create.

As for other programs — if for example I go to Sophos Antivirus, Scheduled scans and try and schedule a scan, it then says «Invalid Permissions» when it actually goes to create the scheduled scan — which would normally create the job in task manager — so the problem is clearly related.

This also occurs in the Synchronisation program ViceVersa which has a «scheduled task» dialog — the task also fails to create — when it asks for the ‘username and password to create the account’ its says «invalid password» regardless of what user account (domain admin, local admin, etc) is used.

These programs work fine from our other Windows 2008 server, just this particular one is broken — i’d imagine i’d have the same problem with any program that attempts to create a scheduled task in task scheduler.

In the Event viewer the following errors are generated:

Task Compatibility module failed to update task «User_Feed_Synchronization-.job» to the required status 0. Additional Data: Error Value: 2148073494.

Task Compatibility module failed to update task «User_Feed_Synchronization-.job» . Additional Data: Error Value: 2148073494.

Источник

Task scheduler failed to start additional data error value 2147943645

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

Question

I have created two tasks for Windows 7/Vista & Windows XP Systems to create a schedule task which will run a vbs file from a network share. I am getting below errors on the client systems events.

The computer ‘DailyTestSchedule-Vista-Win7’ preference item in the ‘Test GP1 <591cecc9-434c-4294-add0-fd91619bae40>‘ Group Policy object did not apply because it failed with error code ‘0x80041318 The task XML contains a value which is incorrectly formatted or out of range.’ This error was suppressed.

The computer ‘DailyTestSchedule’ preference item in the ‘Test GP1 <591cecc9-434c-4294-add0-fd91619bae40>‘ Group Policy object did not apply because it failed with error code ‘0x80070057 The parameter is incorrect.’ This error was suppressed.

I am trying to deploy these settings from my Windows 7 system where RSAT installed. Windows XP system have CSE installed. I have tried to enable Debug logging but not seeing Logging & Tracing option under «Computer ConfigurationPoliciesAdministrative TemplatesSystemGroup PolicyLogging and TracingConfigure Schedulled Tasks preference logging and tracing».

Tried below article also but still unable to see logging options.

Please refer to the following steps to check the TaskSchedule log on problematic Windows 7 client first.

a. Click «Start»->»Run», type «eventvwr» (without quote), press Enter.

b. In «Event Viewer» console, in the left panel, locate to: Applications and Services LogsMicrosoftWindowsTaskSchedule

c. Right-click «Operational», please ensure «Disable Log» shows.

NOTE: it indicates that the event log is enabled now.

d. Click «Operational».

Please check any errors there, you can also paste the errors here or send me the log for research.

For troubleshooting, you can try starting a single program, such as CMD, notepad with the same Triggers, Actions, Conditions and Settings as a test. What is the result?

In the meantime, you can also deploy schedule task via group policy using startup script. For more information on creating a task via command, please type “schtasks /create /?’ To deploy a script via group policy, go to Computer Configuration, Windows Settings, Scripts(Startup/Shutdown).

As you want to deploy the task to run the .vbs file from a network share, on the problematic client, please check whether you can access and run the .vbs file with the user you have set in the task schedule policy. Please also create a task manually on a Windows 7 and XP client to make sure the triggers and the conditions are correct.

Please also gather the following files for research.

a. On domain controller, click Start -> Run, type GPMC.MSC, it will load the GPMC console.

b. Right click on «Group Policy Result» and choose wizard to generate a report for the problematic Windows 7 computer and user account. (Choose computer and select the proper user in the wizard)

c. Right click the resulting group policy result and click the «Save Report…» => save report to save the report to a HTML file.

d. Repeat the same steps on a Windows XP client.

Upload these file to the following workspace.

You can upload the information files to the following link. (Please choose «Send Files to Microsoft»)

Note: Due to differences in text formatting with various email clients, the workspace link above may appear to be broken. Please be sure to include all text between ‘(‘ and ‘)’ when typing or copying the workspace link into your browser. Meanwhile, please note that files uploaded for more than 72 hours will be deleted automatically. Please ensure to notify me timely after you have uploaded the files. Thank you for your understanding.

Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Источник