Tbmux32 exe ошибка приложения

This file is a part of the Microsoft Windows system. EXE is short for executable and these types of files are used on Windows computers to install or run software.

Some programs may need tbmux32.exe to run properly, so if this file is missing you may encounter issues when trying to launch applications or games. Often, you will get an error message that says “tbmux32.exe missing” that tells you which specific file needs to be restored so that the application or game can continue functioning.

To resolve these issues caused by a missing tbmux32.exe, read the suggestions below.

How to fix tbmux32.exe missing error?

If the tbmux32.exe missing error appears on your PC, you can use the methods below. Some are automatic, which means you can start a process to let the system automatically restore the file. Others are manual, meaning you will have to manually download tbmux32.exe and move it to the correct program installation folder. If you are not very experienced with digging through system files and would prefer not to, you can simply go straight to an automatic method.

Here our list of solutions to try:

• Method 1: Download tbmux32.exe
• Method 2: Fix the missing tbmux32.exe error automatically
• Method 3: Update drivers to restore missing .exe files
• Method 4: Scan your PC for malware
• Method 5: Use System File Checker (SFC)
• Method 6: Fix corrupted tbmux32.exe file by performing System Restore

Method 1: Download tbmux32.exe

This is the most straightforward approach, but it is fully manual and will require you to download the right exe file and place it in the correct folder on your PC.

Look through the list of available versions of tbmux32.exe then select the correct file and click “Download”. If you are unsure which one to download, read the section below or choose an automatic method.

How to choose the correct version of tbmux32.exe?

When looking through the list of EXE files, pay attention to whether it’s a 64-, or 32-bit file, as well as the language it uses. For 64-bit programs, use 64-bit files if they are listed above.

It’s best to choose those EXE files whose language corresponds to the language of your program, if possible. It’s also recommended to choose the latest version to ensure up-to-date functionality.

As long as you get these two parameters right, you won’t have any issues downloading the right file.

Where to place the tbmux32.exe file?

After you’ve downloaded the correct EXE file, place it inside the program installation folder. Alternatively, you can put the tbmux32.exe file within the Windows system directory.

How to register tbmux32.exe?

If placing the missing tbmux32.exe file into the proper directory doesn’t seem to solve the problem, this means you need to register it. To do so, copy your EXE file to the C:WindowsSystem32 folder, then open a command prompt with administrator privileges. There, type “regsvr32 tbmux32.exe” and press Enter.

Method 2: Fix the missing tbmux32.exe error automatically

Outbyte PC Repair allows you to automatically repair EXE errors, without you having to worry about choosing the right file or registering it. The utility will not only download the correct version of tbmux32.exe for free and suggest the right directory to install it to but will also resolve other issues related to the tbmux32.exe file.

1. Download tbmux32.exe
2. Fix the missing tbmux32.exe error automatically
3. Update drivers to restore missing .exe files

Method 3: Update drivers to restore missing .exe files

Driver updates for the Windows operating system, as well as for network adapters, monitors, printers, etc., can be downloaded individually and installed from the Windows Update Center or by using specialized utilities.

Option 1 — Automatic Device Drivers Update

Outbyte Driver Updater automatically updates drivers on Windows. Routine manual driver updates are now a thing of the past. Just with a few clicks you can automatically search your system for outdated drivers and update all of them.

1. Download the Outbyte Driver Updater
2. Install the application
3. Launch the app
4. Driver Updater will scan your system for outdated and missing drivers
5. Click Update to automatically update all drivers

Option 2 — Manually Update Device Drivers

Of course, you can also choose to update your drivers yourself one by one. First you will need to look through them to find the outdated ones, then search for the updates online. Here’s how to do that:

1. Go to Taskbar’s search box and type Device Manager, then select Device Manager in the search results.
2. Select a category to look at the devices’ names — right-click the one that needs to be updated
3. Choose Search automatically for updated driver software
4. Select Update Driver
5. Windows might not be able to find the new driver automatically. In this case, you can find the driver on the manufacturer’s website, where all the necessary instructions are available. Just make sure to find the official website so that you only download the trusted driver and not some malicious software.

Method 4: Scan your PC for malware to fix the tbmux32.exe error

Since EXE files communicate directly with your system to give instructions, they are very common targets for malware, which can intentionally corrupt these files in order to substitute them with its own malicious files. If you suspect that this is what’s causing errors on your system, you should scan your computer for malware and eliminate it as soon as possible.

Option 1 — Windows Defender

The new version of Windows 10 has a built-in application called «Windows Defender», which allows you to check your computer for viruses and remove malware. In order to use the Windows Defender offline scan, follow these steps:

1. Press the Win key or click Start and click on the gear icon to open Settings. Alternatively press Win + I key combination.
2. Select the Update and Security option and go to the Windows Defender section.
3. At the bottom of the Defender settings there is a checkbox labeled «Windows Defender Offline scan». To start it, click «Scan Now». Note that you will have to save all unsaved data before restarting your PC.

After you click the “Scan Now” button, the computer will reboot and automatically start searching for viruses and malware. Upon completion of the scan, the computer will restart, and in the notifications, you will see a report on the completed scan.

Option 2 — Outbyte AVarmor

Outbyte products are some of the most popular and effective programs for dealing with malware and unwanted programs, and they will come in handy even if you have a high-quality third-party antivirus installed. This software is specifically designed to complement your antivirus, not replace it. In the new version of Outbyte, scans can be performed in real time and manually. To initiate a manual scan please follow the steps below:

1. Launch Outbyte AVarmor and click the Scan Now button. Also, you can select the Scan option on the left side of the program’s window and click Full Scan. The system will begin scanning and you will be able to see the scan results.
2. Select items that you want to quarantine and press the “Quarantine Selected” button. After they’ve been quarantined, you may be prompted to reboot the computer.
3. After the program has been restarted, you can delete all quarantined objects by going to the appropriate section of the program. However, if you found that your system started to encounter errors after something was quarantined, you should restore the file instead.

Method 5: Fix the tbmux32.exe missing error with System File Checker (SFC)

Many users are familiar with the sfc/scannow system file integrity check command, which automatically checks and fixes protected Windows system files. It is often one of the first things experienced Windows users do when they encounter errors.

To execute this command, you have to run Command Prompt as an administrator.

1. Start the command line as an administrator in Windows by pressing the Win key on your keyboard and typing «Command Prompt» in the search field, then — right-click on the result and select “Run as administrator”. Alternatively, you can press the Win + X key combination which will open the menu where you can select Command Prompt (Admin).
2. Type sfc / scannow while in Command Prompt and hit Enter. After entering the command, a system check will begin. It will take a while, so please be patient. Once the process is complete you will see this message: “Windows Resource Protection found corrupt files and successfully repaired them.” or “Windows Resource Protection found corrupt files but was unable to fix some of them”.

Keep in mind that System File Checker (SFC) cannot fix integrity errors for those system files that are currently being used by the operating system. To fix these files you have to run SFC command through the command prompt in the Windows recovery environment. You can get into Windows Recovery Environment from the login screen by clicking Shutdown, then holding down the Shift key while selecting Restart.

In Windows 10, you can press Win key, select Settings > Update & security > Recovery and under Advanced Startup, click Restart now. You can also boot from the installation disk or bootable USB flash drive with the Windows 10 distribution. On the installation screen select your preferred language and then select “System Restore”. After that, go to “Troubleshooting” > “Advanced Settings” > “Command Prompt”. Once in Command Prompt type the following command: sfc /scannow /offbootdir=C: /offwindir=C:Windows, where C is the partition with the installed operating system and C:Windows, is the path to the Windows 10 folder.

This operation will take a while and it is important to wait until it is complete. When finished, close the command prompt and restart the computer as usual. You should find that the tbmux32.exe missing error is gone.

Method 6: Fix the corrupted tbmux32.exe file by performing a System Restore

System Restore is very useful if you want to fix tbmux32.exe error, or almost any other error. Using the «System Restore» function, you can choose to restore Windows to a date when the tbmux32.exe file was not damaged. Restoring Windows to an earlier date cancels changes that were made to system files since that date. Please follow the steps below to roll back Windows using System Restore and get rid of the tbmux32.exe error.

1. Press the Win + R keys combination to launch the Run dialog.
2. Type sfc /scannow while in Command Prompt and hit Enter.

After entering the command, a system check will begin. It will take a while, so please be patient. Once the operation is complete you will see this message: “Windows Resource Protection found corrupt files and successfully repaired them.” or “Windows Resource Protection found corrupt files but was unable to fix some of them”.

1. Type rstrui in the Run text box and click OK or hit Enter. This will open the system recovery utility.
2. The “System Restore” window may include the “Choose a different restore point” option. If so, select this option and click Next. Check the “Show more restore points” checkbox to see a complete list of dates.
3. Click the «Next» button and then click «Finish» to confirm your restore point. At this point, your computer will reboot normally and boot up with a restored version of Windows, and the tbmux32.exe error should be resolved.

Tbmux32.exe file information

The process known as Transbase/CD Database System or TransBase/CD DataBase System belongs to software TransBase/CD DataBase System or Transbase/CD Database System or GlobalTIS or Transbase by (www.transaction.de) (version D 81829 Munich) or TransAction Software (www.transaction.de) (version D 81737 Munich).

Description: Tbmux32.exe is not essential for the Windows OS and causes relatively few problems. The tbmux32.exe file is located in a subfolder of «C:» (common is C: or C:Program Files (x86)cosidsbin).
Known file sizes on Windows 10/11/7 are 385,024 bytes (22% of all occurrences), 165,376 bytes and 9 more variants.  
It is the service «Transbase».

The program has no visible window. It is not a Windows system file. The process uses ports to connect to or from a LAN or the Internet.
Therefore the technical security rating is 53% dangerous, however you should also read the user reviews.

Uninstalling this variant:
If problems with tbmux32.exe come up, you can do the following:
  1) uninstall TECDOC CD or ETK (Lokal) software via Windows Control Panel/Add or Remove Programs (Windows XP) or Programs and Features (Windows 10/8/7)
  2) search for help on the company’s website.

Recommended: Identify tbmux32.exe related errors

Important: Some malware camouflages itself as tbmux32.exe, particularly when located in the C:Windows or C:WindowsSystem32 folder. Therefore, you should check the tbmux32.exe process on your PC to see if it is a threat. We recommend Security Task Manager for verifying your computer’s security. This was one of the Top Download Picks of The Washington Post and PC World.

Best practices for resolving tbmux32 issues

A clean and tidy computer is the key requirement for avoiding problems with tbmux32. This means running a scan for malware, cleaning your hard drive using 1cleanmgr and 2sfc /scannow, 3uninstalling programs that you no longer need, checking for Autostart programs (using 4msconfig) and enabling Windows’ 5Automatic Update. Always remember to perform periodic backups, or at least to set restore points.

Should you experience an actual problem, try to recall the last thing you did, or the last thing you installed before the problem appeared for the first time. Use the 6resmon command to identify the processes that are causing your problem. Even for serious problems, rather than reinstalling Windows, you are better off repairing of your installation or, for Windows 8 and later versions, executing the 7DISM.exe /Online /Cleanup-image /Restorehealth command. This allows you to repair the operating system without losing data.

To help you analyze the tbmux32.exe process on your computer, the following programs have proven to be helpful: ASecurity Task Manager displays all running Windows tasks, including embedded hidden processes, such as keyboard and browser monitoring or Autostart entries. A unique security risk rating indicates the likelihood of the process being potential spyware, malware or a Trojan. BMalwarebytes Anti-Malware detects and removes sleeping spyware, adware, Trojans, keyloggers, malware and trackers from your hard drive.

Other processes

safeips.dll dnsblocka.dll bggamingmonitor.dll tbmux32.exe netfaxserver64.exe rpcss.dll hpdrvmntsvc.exe incdsrv.exe innovativesolutions_monitor_svr.exe googledesktopnetwork3.dll openvpnserv.exe [all]

Trebuc32.exe

Классические проблемы Trebuc32.exe

Частичный список ошибок trebuc32.exe Linux Format Issue 58:

• «Ошибка программы Trebuc32.exe. «
• «Недопустимая программа Win32: trebuc32.exe»
• «Возникла ошибка в приложении Trebuc32.exe. Приложение будет закрыто. Приносим извинения за неудобства.»
• «Файл trebuc32.exe не найден.»
• «Trebuc32.exe не найден.»
• «Ошибка запуска программы: trebuc32.exe.»
• «Trebuc32.exe не выполняется. «
• «Trebuc32.exe остановлен. «
• «Ошибка пути программного обеспечения: trebuc32.exe. «

Эти сообщения об ошибках EXE могут появляться во время установки программы, в то время как программа, связанная с trebuc32.exe (например, Linux Format Issue 58) работает, во время запуска или завершения работы Windows, или даже во время установки операционной системы Windows. Запись ошибок trebuc32.exe внутри Linux Format Issue 58 имеет решающее значение для обнаружения неисправностей электронной Software и ретрансляции обратно в Future Publishing для параметров ремонта.

Эпицентры Trebuc32.exe Головные боли

Эти проблемы trebuc32.exe создаются отсутствующими или поврежденными файлами trebuc32.exe, недопустимыми записями реестра Linux Format Issue 58 или вредоносным программным обеспечением.

В основном, осложнения trebuc32.exe связаны с:

• Недопустимые разделы реестра Trebuc32.exe/повреждены.
• Вирус или вредоносное ПО, повреждающее trebuc32.exe.
• Trebuc32.exe злонамеренно удален (или ошибочно) другим изгоем или действительной программой.
• Другая программа, конфликтующая с trebuc32.exe или другой общей ссылкой Linux Format Issue 58.
• Linux Format Issue 58 (trebuc32.exe) поврежден во время загрузки или установки.

Rundll32.exe files are system processes related to Windows 10’s functioning. These files are part of a code network connecting many programs on your computer.

Reusing the same code for various programs increases your system’s processing power and memory. However, considering the vast complexity of such code networks, errors sometimes appear.

What does RunDLL error mean?

Corrupted DLL files mainly cause rundll32.exe errors, missing DLL files, a shared DLL file deleted or infected by a virus or incorrect DLL entries in the Windows registry.

Rundll32.exe error can cause particular problems on your PC. Speaking of this error, users reported the following issues:

• Rundll32.exe error Windows 10 and prior (Windows 7, 8.1, XP) – This error can appear on any version of Windows, including prior versions.
• Rundll32.exe virus, error in pen drive – If you’re getting this error while connecting a pen drive, your pen drive may be infected with malware. To fix the problem, use your antivirus tool and perform a detailed scan of your pen drive.
• Rundll32.exe application error – Sometimes, this problem can appear due to your antivirus. You might have to change a few of your settings to fix the issue and check if that solves the problem.
• Rundll32.exe error entry point not found, memory could not be written, opening process – Many problems can occur due to Rundll32.exe. If you have any of these errors, try running SFC and DISM scans and check if that fixes your problem.
• Rundll32.exe runtime error, shutdown error – This error can sometimes appear when you try to shut down your PC. If this happens, you might have to perform System Restore and check if that solves the issue.
• Rundll32.exe error on boot, crash on startup – Sometimes, this error can appear as soon as your PC boots. This is a strange problem, but you should be able to fix it by creating a new user account.
• exec: “rundll32”: executable file not found in %path%

In the rest of the article, we will show you what to do when you get the RunDLL error on Windows 10 and the specified module cannot be found.

How do I fix Rundll32.exe application error?

1. Replace the corrupted file using Startup Repair

1. Type Recovery options in the search box > double-click Recovery options.
   
   
2. Go to Advanced startup > Restart now.
   
   
3. Your computer will launch a blue window > select Troubleshooting.
4. Select Advanced options > Startup Settings > Restart.
5. A new list of settings will appear > Select Enable debugging.

2. Use a dedicated DLL repair tool

For a lot of us going through recovery and digging into advanced settings can be quite challenging.

We recommend a more effective and versatile way of dealing with this issue: to let software do the work for you, a tool such as Restoro.

Keep in mind that manually replacing DLL is risky and should not be done unless you manage to back up your registry appropriately before doing so.

Restoro is a reliable third-party DLL fixer which uses a built-in automated system and an online library full of functional DLLs to replace and repair any files that might be corrupted or damaged on your PC.

All you need to do to resolve your PC’s problems is to launch it, and simply follow the on-screen instructions to start the process, as everything else is covered by the software’s automated processes.

This is how you can fix registry errors using Restoro:

1. Download and install Restoro.
2. Launch the software.
3. Wait for it to scan your PC for any stability issues and possible malware.
4. Press Start Repair.
5. Restart your PC for all the changes to take effect.

After this process is completed your PC will be as good as new, and you will no longer have to deal with BSoD errors, slow response times, or other similar issues.

⇒ Get Restoro

---

Disclaimer: This program needs to be upgraded from the free version in order to perform some specific actions.

---

3. Use a PowerShell command

1. Press Windows Key + X to open Win + X menu. Now choose Command Prompt (Admin) or PowerShell (Admin) from the list.
   
2. Now enter sfc/scannow and press Enter to start the SFC scan.
   
3. Remember that this scan can take about 15 minutes or more, so don’t interfere with it.

Sometimes this problem can occur due to file corruption. File corruption can appear for various reasons, and if you have problems with the Rundll32.exe error, you might be able to fix the issue by running the SFC scan.

Once the scan is finished, check if the problem persists. If you can’t run an SFC scan or if the issue is still present, you might be able to fix the problem by running the DISM scan instead.

To do that, follow these steps:

1. Start Command Prompt as administrator.
2. Enter and run this command: DISM /Online /Cleanup-Image /RestoreHealth
   
3. DISM scan will now start. It’s worth mentioning that this scan can take more than 20 minutes, so don’t interrupt it.

Once the DISM scan is finished, check if the problem is resolved. If you could not run an SFC scan before, be sure to run it after the DISM scan is finished and check if that solves your issue.

4. Clear your browser’s cache and close all tabs

Several users reported a Rundll32.exe error in their browsers. If you’re having this problem, you will most likely have a scamming website in one of your tabs.

If this problem occurs in your browser, try to clear your browsing history and cache. If that doesn’t work, close the tab that is giving you this message; everything should go back to normal.

You can also open a different browser and check if the issue reappears. If not, it means you have a scamming website on the other browser.

Regardless of the message in the browser, your PC isn’t infected, and your files aren’t corrupted, so there’s no need to worry. Close that tab, and the issue won’t appear anymore.

5. Check your antivirus

If you’re getting a Rundll32.exe error on your PC, your antivirus is the most likely cause. However, several users reported that the leading cause was the sandbox feature of their antivirus.

According to users, Rundll32.exe was added to the sandbox on their antivirus, and that caused the issue to appear. So, to solve the problem, you need to remove Rundll32 from the sandbox and check if that solves the problem.

Users reported that some antivirus software might block non-malicious apps or processes. Therefore, we recommend you change your antivirus settings.

If changing the antivirus settings doesn’t solve the issue, you might have to remove your antivirus. There are several ways to do that, but the best is using a dedicated removal tool.

You can download the antivirus removal tool from your antivirus developer for free. Once you remove the antivirus, check if the issue persists. If not, it means that your antivirus was causing the problem.

To ensure the problem doesn’t reappear in the future, it’s advised to switch to a different antivirus solution. In addition, you can find alternative security software that doesn’t interfere with other apps or processes on your system.

For a seamless experience, we recommend you try an antivirus with low CPU usage, as it can keep your PC fully protected without negatively impacting its performance.

6. Make sure that your PC is up to date

1. Press Windows Key + I to open the Settings app.
2. Now navigate to the Update & Security section.
   
3. Click on Check for updates button.
   

Sometimes problems with Rundll32.exe can occur due to specific bugs on your system. However, you might be able to fix the problem simply by installing the latest updates.

By default, Windows 10 will install the missing updates automatically, but sometimes you might miss an important update.

However, you can always check for updates manually. 

Windows will now check for available updates and download them automatically in the background.

After the updates are downloaded, they will be installed automatically as soon as you restart your PC. Once your PC is up to date, check if the problem persists.

7. Perform a System Restore

1. Press Windows Key + S and enter system restore. Choose Create a system restore point from the menu.
   
2. Now click the System Restore button.
   
3. The System Restore window will now appear. Click Next to proceed.
   
4. If available, check to Show more restore points. Now select the desired restore point and click Next to proceed.
   
5. Follow the instructions on the screen to complete the restoration process.

If you’re frequently getting the Rundll32.exe error on your PC, you might be able to fix the problem by performing a System Restore.

If you’re unfamiliar, System Restore is a valuable feature that allows you to restore your PC to an earlier state and fix many problems. 

Once the restoration process is finished, check if the problem is resolved.

Why do DLL errors occur?

Since you asked, know that Errors involving DLL files are usually caused by an issue in the software world, such as deleted files or virus infections.

That being said, sometimes, the underlying cause of a DLL error is hardware-related, so keep that in mind when dealing with such errors.

RunDLLl errors after a Windows 10 update happen often enough, so rest assured that solutions are available when you need them.

You can also encounter them as:

• RunDLL error Windows 10 logilda.dll
• RunDLL error Windows 10 hpstatusbl.dll

Getting a RunDLL error usually means that there was a problem starting the incorrect parameter, but you will find all you need in this article.

If you’ve found other workarounds to fix this issue, you can share them with the community in the comments section below.