Tcp optimizer error hkey local machine

3 простых шага по исправлению ошибок TCP_OPTIMIZER.EXE.EXE

Подробности файле с именем tcp_optimizer.exe.exe

Очистите мусорные файлы, чтобы исправить tcp_optimizer.exe.exe, которое перестало работать из-за ошибки.

• Запустите приложение Asmwsoft Pc Optimizer.
• Потом из главного окна выберите пункт «Clean Junk Files».
• Когда появится новое окно, нажмите на кнопку «start» и дождитесь окончания поиска.
• потом нажмите на кнопку «Select All».
• нажмите на кнопку «start cleaning».

Очистите реестр, чтобы исправить tcp_optimizer.exe.exe, которое перестало работать из-за ошибки

Как удалить заблокированный файл

• В главном окне Asmwsoft Pc Optimizer выберите инструмент «Force deleter»
• Потом в «force deleter» нажмите «Выбрать файл», перейдите к файлу tcp_optimizer.exe.exe и потом нажмите на «открыть».
• Теперь нажмите на кнопку «unlock and delete», и когда появится подтверждающее сообщение, нажмите «да». Вот и все.

Настройка Windows для исправления критических ошибок tcp_optimizer.exe.exe:

• Нажмите правой кнопкой мыши на «Мой компьютер» на рабочем столе и выберите пункт «Свойства».
• В меню слева выберите » Advanced system settings».
• В разделе «Быстродействие» нажмите на кнопку «Параметры».
• Нажмите на вкладку «data Execution prevention».
• Выберите опцию » Turn on DEP for all programs and services . » .
• Нажмите на кнопку «add» и выберите файл tcp_optimizer.exe.exe, а затем нажмите на кнопку «open».
• Нажмите на кнопку «ok» и перезагрузите свой компьютер.

Как другие пользователи поступают с этим файлом?

Всего голосов ( 202 ), 133 говорят, что не будут удалять, а 69 говорят, что удалят его с компьютера.

Как вы поступите с файлом tcp_optimizer.exe.exe?

Некоторые сообщения об ошибках, которые вы можете получить в связи с tcp_optimizer.exe.exe файлом

• (tcp_optimizer.exe.exe) столкнулся с проблемой и должен быть закрыт. Просим прощения за неудобство.
• (tcp_optimizer.exe.exe) перестал работать.
• tcp_optimizer.exe.exe. Эта программа не отвечает.
• (tcp_optimizer.exe.exe) — Ошибка приложения: the instruction at 0xXXXXXX referenced memory error, the memory could not be read. Нажмитие OK, чтобы завершить программу.
• (tcp_optimizer.exe.exe) не является ошибкой действительного windows-приложения.
• (tcp_optimizer.exe.exe) отсутствует или не обнаружен.

TCP_OPTIMIZER.EXE.EXE

Проверьте процессы, запущенные на вашем ПК, используя базу данных онлайн-безопасности. Можно использовать любой тип сканирования для проверки вашего ПК на вирусы, трояны, шпионские и другие вредоносные программы.

Источник

Thread: TCP Optimizer needs new version since v1709 Windows Update [updated]

Thread Tools

Display

TCP Optimizer needs new version since v1709 Windows Update [updated]

ctcp doesnt work sometimes. It seems bugged. Its not all about bugs, there isnt new version for quite some time. The registry is changing slightly with every new Windows Update. There are also other tweaks that can be added as options like ethernet interface metric, WINS, DNS options too. or get improved RWIN option back. Receive & Transmit Buffers, ecncapability, Some power saving options too. Thats on top of my head but im sure im forgetting something here. I see in forums useful tweaks for older Windows versions & Im wondering are they working on Windows 10

There is no need for changes in the TCP Optimizer settings because of the fall update as far as I know.

It bugs already 3 times, first the TCP Window Auto-Tuning & second the Congestion Control Provider on 2 different Windows installment. IDK what it is. Is it just doesnt show the correct value or fail to make the changes.
Either way i think it can be improved with more options so people dont have to go in registry.

It makes the changes, however, not all changes are readable at startup (i.e. some are network adapter specific, others may be the same between default/optimal, others may not be readable, etc.)

I’ve disabled TCP Window Auto-tuning from Normal to test. After done testing its blank there & cant verify its Normal again. The same happened with Windows Scaling Heuristics & Congestion Control Provider. I cant bring them back to normal/default settings. I have blank on Checksum offloading too but I think its disabled on Intel NIC by default. BTW thats on different Windows instalations. I play with these settings and in registry alot, im trying to find what are best registry tweaks for better hit-registration & low latency. If someone have something please leave a link.I already read the gaming tweaksI’ve disabled TCP Window Auto-tuning from Normal to test. After done testing its blank there & cant verify its Normal again. The same happened with Windows Scaling Heuristics & Congestion Control Provider. I cant bring them back to normal/default settings. I have blank on Checksum offloading too but I think its disabled on Intel NIC by default. BTW thats on different Windows instalations. I play with these settings and in registry alot, im trying to find what are best registry tweaks for better hit-registration & low latency. If someone have something please leave a link.I already read the gaming tweaks in article. article. The trouble is when I set to higher prioroty the game start stuttering and lagging a lot when you are gaming on Realtime in Task Manager. I also give play with DisplayPostProcessing which name was different before the last couple of Windows Updates. It was LowLatency I think.

Last edited by n1kobg; 01-30-18 at 12:06 PM .

Yes there is definitely something wrong with ctcp. This commands netsh int tcp set global congestionprovider=ctcp doesnt work and it shows be bicubic

TCP Optimizer is OUTDATA

You can still change to CTCP with that command!

netsh int tcp set supplemental Internet congestionprovider=CTCP

Yes, TCP Optimizer is OUTDATA because TOp. uses wrong command for Powershell and newest Windows 10 Build ( Microsoft Windows [Version 10.0.16299.214] ).

And Windows 10 is restricted in TCP/IP Settings, first things first.

TCPOptimizer uses InternetTemplate «InternetCustom» for Windows 10. But Windows 10 newest version uses an other Template, maybe Update TCP Optimizer to get used Template in Windows with.

[CMD]
netsh int tcp show supplemental -> The TCP global default template is «internet»

[Powershell]
Get-NetTransportFilter

SettingName : Internet
Protocol : TCP
LocalPortStart : 0
LocalPortEnd : 65535
RemotePortStart : 0
RemotePortEnd : 65535
DestinationPrefix : *

( You cant change the Template to InternetCustom everything is restricted except in Windows Server Edition. )

Powershell Command to see CongestionProviders for all Templates.

Windows 10 uses CUBIC for Internet and InternetCustom.

You can still change to CTCP with that command!

netsh int tcp set supplemental Internet congestionprovider=CTCP

You can change every Templates Congestionprovider but you cant uses the other Templates. Microsoft is working to fix it.

Second Problem is you cant change DelayedAckFrequency and DelayedAckTimeoutMs [NAGLE FUNCTION]!

PS C:UsersAdministrator> Set-NetTCPSetting -SettingName Internet -DelayedAckFrequency 0
Set-NetTCPSetting : Property DelayedAckFrequency is read-only

PS C:UsersAdministrator> Set-NetTCPSetting -SettingName Internet -DelayedAckTimeoutMs 0
Set-NetTCPSetting : Property DelayedAckTimeout is read-only

So ez would be to change TCP Optimizer Powershell Commands to -Internet or better if someone can program a GET Command for USED Template.

Get-NetOffloadGlobalSetting ( OS Side Only )

ReceiveSideScaling : Enabled ( Is it recommended to use ReceiveSideScaling on Adapter Side and OS Side or only Adapter ? )
ReceiveSegmentCoalescing : Enabled ( Its Enabled on Default in Windows 10. My opinion this Feature has most effect on Windows 10 with Cubic. Old saying Disable for Gaming Enabled for Througput, Enabled best performance even ingames. Maybe its faster for Windows to put smaller packets together instead sending much more smaller ? Better Latency ? )
Chimney : Enabled ( Default: Disabled ) I set it to Automatic.
TaskOffload : Enabled ( Task offload settings include IP checksum offload, Internet Protocol security (IPsec) task offload, and Large Send Offload. Enable or Disable for Gaming? It doesnt Affect the adapter Settings but my guess we ant LSO disabled for Gaming. )
NetworkDirect : Enabled ( Maybe similiar like NetDMA on later OS Builds? Microsoft Says: NetworkDirect Remote Direct Memory Access (RDMA). Use this parameter only on servers. Then why its Enabled on Default? You cant Disable it. Set-NetOffloadGlobalSetting : This feature is available on servers only. )
NetworkDirectAcrossIPSubnets : Blocked
PacketCoalescingFilter : Enabled ( into a single packet. My guess for Gaming better to Disable! )

( My Question about OffloadGlobalSettings what are the best settings for Performance and low Latency specially for Gaming? )

This is was Intel Says for there Network Adapters!

What is the meaning with TCP Offloads? Checksum Offloads on the Network Adapter? TCP AND UDP? OR ONLY UDP it LSO included. Not enough info myguess!

Name DisplayName DisplayValue RegistryKeyword RegistryValue
—- ———— ———— ————— ————-
Ethernet Flow Control Rx & Tx Enabled *FlowControl <3>
Ethernet Interrupt Moderation Disabled *InterruptMo. <0>
Ethernet IPv4 Checksum Offload Rx & Tx Enabled *IPChecksumO. <3>
Ethernet Jumbo Packet Disabled *JumboPacket <1514>
Ethernet Large Send Offload V2 (IPv4) Disabled *LsoV2IPv4 <0>
Ethernet Large Send Offload V2 (IPv6) Disabled *LsoV2IPv6 <0>
Ethernet Maximum Number of RSS Queues 2 Queues *NumRssQueues <2>
Ethernet Protocol ARP Offload Disabled *PMARPOffload <0>
Ethernet Protocol NS Offload Disabled *PMNSOffload <0>
Ethernet Packet Priority & VLAN Packet Priority & VLAN Disa. *PriorityVLA. <0>
Ethernet Receive Buffers 512 *ReceiveBuffers <512>
Ethernet Receive Side Scaling Enabled *RSS <1>
Ethernet Speed & Duplex Auto Negotiation *SpeedDuplex <0>
Ethernet TCP Checksum Offload (IPv4) Rx & Tx Enabled *TCPChecksum. <3>
Ethernet TCP Checksum Offload (IPv6) Rx & Tx Enabled *TCPChecksum. <3>
Ethernet Transmit Buffers 1024 *TransmitBuf. <1024>
Ethernet UDP Checksum Offload (IPv4) Rx & Tx Enabled *UDPChecksum. <3>
Ethernet UDP Checksum Offload (IPv6) Rx & Tx Enabled *UDPChecksum. <3>
Ethernet Wake on Magic Packet Disabled *WakeOnMagic. <0>
Ethernet Wake on Pattern Match Disabled *WakeOnPattern <0>
Ethernet Adaptive Inter-Frame Spacing Disabled AdaptiveIFS <0>
Ethernet Energy Efficient Ethernet Off EEELinkAdver. <0>
Ethernet Enable PME Disabled EnablePME <0>
Ethernet Interrupt Moderation Rate Off ITR <0>
Ethernet Legacy Switch Compatibility. Disabled LinkNegotiat. <1>
Ethernet Log Link State Event Enabled LogLinkState. <51>
Ethernet Gigabit Master Slave Mode Auto Detect MasterSlave <0>
Ethernet Locally Administered Address — NetworkAddress <—>
Ethernet Reduce Speed On Power Down Enabled ReduceSpeedO. <1>
Ethernet System Idle Power Saver Disabled SipsEnabled <0>
Ethernet Ultra Low Power Mode Disabled ULPMode <0>
Ethernet Wait for Link Auto Detect WaitAutoNegC. <2>
Ethernet Wake on Link Settings Disabled WakeOnLink

Set-NetAdapterAdvancedProperty -RegistryKeyword *FlowControl -RegistryValue 0
( Sets FlowControl OFF in Adapter Settings )

CongestionProvider
Maybe CTCP is not the best anymore since Windows 10 uses Cubic as Default!

PS: Sorry for my bad English 😛

Last edited by st1cky; 02-06-18 at 04:27 AM .

Источник

3 простых шага по исправлению ошибок TCPOPTIMIZER.EXE

Подробности файле с именем tcpoptimizer.exe

Очистите мусорные файлы, чтобы исправить tcpoptimizer.exe, которое перестало работать из-за ошибки.

• Запустите приложение Asmwsoft Pc Optimizer.
• Потом из главного окна выберите пункт «Clean Junk Files».
• Когда появится новое окно, нажмите на кнопку «start» и дождитесь окончания поиска.
• потом нажмите на кнопку «Select All».
• нажмите на кнопку «start cleaning».

Очистите реестр, чтобы исправить tcpoptimizer.exe, которое перестало работать из-за ошибки

Как удалить заблокированный файл

• В главном окне Asmwsoft Pc Optimizer выберите инструмент «Force deleter»
• Потом в «force deleter» нажмите «Выбрать файл», перейдите к файлу tcpoptimizer.exe и потом нажмите на «открыть».
• Теперь нажмите на кнопку «unlock and delete», и когда появится подтверждающее сообщение, нажмите «да». Вот и все.

Настройка Windows для исправления критических ошибок tcpoptimizer.exe:

• Нажмите правой кнопкой мыши на «Мой компьютер» на рабочем столе и выберите пункт «Свойства».
• В меню слева выберите » Advanced system settings».
• В разделе «Быстродействие» нажмите на кнопку «Параметры».
• Нажмите на вкладку «data Execution prevention».
• Выберите опцию » Turn on DEP for all programs and services . » .
• Нажмите на кнопку «add» и выберите файл tcpoptimizer.exe, а затем нажмите на кнопку «open».
• Нажмите на кнопку «ok» и перезагрузите свой компьютер.

Как другие пользователи поступают с этим файлом?

Всего голосов ( 202 ), 133 говорят, что не будут удалять, а 69 говорят, что удалят его с компьютера.

Как вы поступите с файлом tcpoptimizer.exe?

Некоторые сообщения об ошибках, которые вы можете получить в связи с tcpoptimizer.exe файлом

• (tcpoptimizer.exe) столкнулся с проблемой и должен быть закрыт. Просим прощения за неудобство.
• (tcpoptimizer.exe) перестал работать.
• tcpoptimizer.exe. Эта программа не отвечает.
• (tcpoptimizer.exe) — Ошибка приложения: the instruction at 0xXXXXXX referenced memory error, the memory could not be read. Нажмитие OK, чтобы завершить программу.
• (tcpoptimizer.exe) не является ошибкой действительного windows-приложения.
• (tcpoptimizer.exe) отсутствует или не обнаружен.

TCPOPTIMIZER.EXE

Проверьте процессы, запущенные на вашем ПК, используя базу данных онлайн-безопасности. Можно использовать любой тип сканирования для проверки вашего ПК на вирусы, трояны, шпионские и другие вредоносные программы.

Источник

TCPOptimizer.exe

Распространенные проблемы TCPOptimizer.exe

TCPOptimizer.exe Проблемы, связанные с SG TCP Optimizer Application:

• «Ошибка программного обеспечения TCPOptimizer.exe. «
• «Недопустимый файл TCPOptimizer.exe. «
• «TCPOptimizer.exe столкнулся с проблемой и закроется. «
• «TCPOptimizer.exe не может быть найден. «
• «Отсутствует файл TCPOptimizer.exe.»
• «Ошибка запуска программы: TCPOptimizer.exe.»
• «TCPOptimizer.exe не выполняется. «
• «TCPOptimizer.exe остановлен. «
• «Ошибка пути программного обеспечения: TCPOptimizer.exe. «

Эти сообщения об ошибках EXE могут появляться во время установки программы, в то время как программа, связанная с TCPOptimizer.exe (например, SG TCP Optimizer Application) работает, во время запуска или завершения работы Windows, или даже во время установки операционной системы Windows. Важно отметить, когда возникают проблемы TCPOptimizer.exe, так как это помогает устранять проблемы SG TCP Optimizer Application (и сообщать в Windows Software Developer).

Причины ошибок в файле TCPOptimizer.exe

Большинство проблем TCPOptimizer.exe связаны с отсутствующим или поврежденным TCPOptimizer.exe, вирусной инфекцией или недействительными записями реестра Windows, связанными с SG TCP Optimizer Application.

В частности, проблемы TCPOptimizer.exe возникают через:

• Недопустимая (поврежденная) запись реестра TCPOptimizer.exe.
• Вредоносные программы заразили TCPOptimizer.exe, создавая повреждение.
• Другая программа (не связанная с SG TCP Optimizer Application) удалила TCPOptimizer.exe злонамеренно или по ошибке.
• Другая программа, конфликтующая с TCPOptimizer.exe или другой общей ссылкой SG TCP Optimizer Application.
• Неполный или поврежденный SG TCP Optimizer Application (TCPOptimizer.exe) из загрузки или установки.

Windows 7, Vista, 2008, R2 2008Tweaks

Tweaking Windows 7 / Vista TCP/IP settings for broadband internet connections
2008.04.24 10:40 by Philip
Keywords: patch, Nagle, QoS, SynAttackProtect, DNS, DefaultTTL, NetDMA, TCP 1323 Options, MTU, auto-tunning, Compound TCP, Chimney Offload, CTCP, TCP Window, Registry, TCP/IP, tweak, Vista, Windows 7

Windows Vista introduces a number of new features to the TCP/IP stack, including CTCP, and TCP Window Auto-Tuning. This new implementation works much better by default than previous Windows versions with broadband internet connections, and is able to adjust the RWIN value on the fly, depending on the BDP (bandwidth-delay product). This, however, introduces some problems with older routers and restricts the user from tweaking some of the TCP/IP parameters. Still, there is always some room for improvement, and this article explains the known tweakable TCP/IP parameters.

To enter some of the commands below, you will need to run «elevated» command prompt. To do so, click the Start icon > Run > type: cmd , then click CTRL+SHIFT+ENTER. Alternatively, you can navigate to Start > All Programs > Accessories > right-click Command Prompt and choose «Run as Administrator».

Check the TCP/IP state

To check the current status of the Vista TCP/IP tweakable parameters, in elevated command prompt type the following command:

netsh int tcp show global

You will be presented with something like the following:

The settings, as well as their default and recommended state are explained below. The two most important tweakable parameters are «Auto-Tuning Level» and «Congestion Control Provider».

When checking the TCP state with the «netsh int tcp show global» command, it is also possible to see the following message below all those parameters:

** The above autotuninglevel setting is the result of Windows Scaling heuristics overriding any local/policy configuration on at least one profile.

It is displayed when the «Receive Window Auto-Tuning Level» is not explicitly set, or if the system deemed it necessary to make a change because of user prompted «repairing» of your network connection, for example.

Disable Windows Scaling heuristics

Windows Vista/7 has the ability to automatically change its own TCP Window auto-tuning behavior to a more conservative state regardless of any user settings. It is possible for Windows to override the autotuninlevel even after an user sets their custom TCP auto-tuning level. When that behavior occurs, the «netsh int tcp show global» command displays the following message:

** The above autotuninglevel setting is the result of Windows Scaling heuristics
overriding any local/policy configuration on at least one profile.

To prevent that behavior and enforce any user-set TCP Window auto-tunning level, you should execute the following command:

netsh int tcp set heuristics disabled

possible settings are: disabled,enabled,default (sets to the Windows default state)
recommended: disabled (to retain user-set auto-tuning level)

Note this should be executed in elevated command prompt (with admin priviledges) before setting the autotuninlevel in next section. If the command is accepted by the OS you will see an «Ok.» on a new line.

The corresponding Registry value (not necessary to edit if setting via netsh) is located in:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesTcpipParameters
EnableWsd=0   (default: 1, recommended: 0)

TCP Auto-Tuning

To turn off the default RWIN auto tuning behavior, (in elevated command prompt) type:

netsh int tcp set global autotuninglevel=disabled

The default auto-tuning level is «normal», and the possible settings for the above command are:

disabled: uses a fixed value for the tcp receive window. Limits it to 64KB (limited at 65535).
highlyrestricted: allows the receive window to grow beyond its default value, very conservatively
restricted: somewhat restricted growth of the tcp receive window beyond its default value
normal: default value, allows the receive window to grow to accommodate most conditions
experimental: allows the receive window to grow to accommodate extreme scenarios (not recommended, it can degrade performance in common scenarios, only intended for research purposes. It enables RWIN values of over 16 MB)

Our recommendation: normal  (unless you’re experiencing problems).

If you’re experiencing problems with your NAT router or SPI firewall, try the «restricted», «highlyrestricted», or even «disabled» state.

Notes:
— Reportedly, some older residential NAT routers with a SPI firewall may have problems with enabled tcp auto-tuning in it’s «normal» state, resulting in slow speeds, packet loss, reduced network performance in general.
— auto-tuning also causes problems with really old routers that do not support TCP Windows scaling. See MSKB 935400 
— netsh set commands take effect immediately after executing, there is no need to reboot.
— sometimes when using «normal» mode and long lasting connections (p2p software / torrents), tcp windows can get very large and consume too much resources, if you’re experiencing problems try a more conservative (restricted) setting.

If you’re experiencing problems with Auto-Tuning, see also:
MSKB 835400 — email issues
MSKB 934430 — network connectivity behind firewall problems
MSKB 940646 — 3G WWAN throughput issues
MSKB 929868 — web browsing issues
MSKB 932170 — slow network file transfer

Compound TCP — Improve throughput
Add-On Congestion Control Provider

The traditional slow-start and congestion avoidance algorithms in TCP help avoid network congestion by gradually increasing the TCP window at the beginning of transfers until the TCP Receive Window boundary is reached, or packet loss occurs. For broadband internet connections that combine high TCP Window with higher latency (high BDP), these algorithms do not increase the TCP windows fast enough to fully utilize the bandwidth of the connection.

Compound TCP (CTCP) is a newer method, available in Vista and Server 2008 (there is also a hotfix available for XP x64 and 2003 Server — MSKB 949316). CTCP increases the TCP send window more aggressively for broadband connections (with large RWIN and BDP). CTCP attempts to maximize throughput by monitoring delay variations and packet loss. It also ensures that its behavior does not impact other TCP connections negatively.

By default, Vista and Windows 7 have CTCP turned off, it is only on by default under Server 2008. Turning this option on can significantly increase throughput and packet loss recovery.

To enable CTCP, in elevated command prompt type:

netsh int tcp set global congestionprovider=ctcp

To disable CTCP:

netsh int tcp set global congestionprovider=none

Possible options are:  ctcp, none, default (restores the system default value).
Recommended setting: ctcp

It is better to use this newer generation CTCP congestion control algorithm for most broadband connections, we highly recommend it being turned on.

ECN Capability

ECN (Explicit Congestion Notification, RFC 3168) is a mechanism that provides routers with an alternate method of communicating network congestion. It is aimed to decrease retransmissions. In essence, ECN assumes that the cause of any packet loss is router congestion. It allows routers experiencing congestion to mark packets and allow clients to automatically lower their transfer rate to prevent further packet loss. Traditionally, TCP/IP networks signal congestion by dropping packets. When ECN is successfully negotiated, an ECN-aware router may set a bit in the IP header (in the DiffServ field) instead of dropping a packet in order to signal congestion. The receiver echoes the congestion indication to the sender, which must react as though a packet drop were detected.

ECN is disabled by default in Vista and other modern TCP/IP implementations, as it is possible that it may cause problems with some outdated routers that drop packets with the ECN bit set, rather than ignoring the bit. To check whether your router supports ECN, you can use the Microsoft Internet Connectivity Evaluation Tool. The results will be displayed under «Traffic Congestion Test».

To change ECN, in elevated command prompt type:

netsh int tcp set global ecncapability=default

Possible settings are: enabled, disabled, default (restores the state to the system default).
The default state is: disabled
Recommendation: enabled (only for short-lived, interactive connections and HTTP requests with routers that support it, in the presense of congestion/packet loss), disabled otherwise (for pure bulk throughput with large TCP Window, no regular congestion/packet loss, or outdated routers without ECN support).

Notes: ECN is only effective in combination with AQM (Active Queue Management) router policy. It has more noticeable effect on performance with interactive connections and HTTP requests, in the presense of router congestion/packet loss. Its effect on bulk throughput with large TCP Window are less clear.

Currently, we do not recommend enabling this setting, as reportedly it has negative impact on throughput with some residential US ISPs. EA multiplayer games that require a profile logon do not support ECN as well (you will not be able to logon).

More information on ECN: Explicit Congestion Notification (ECN) for TCP/IP

RSS — Receive-side Scaling

The receive-side scaling setting enables parallelized processing of received packets on multiple processors, while avoiding packet reordering. It avoids packet reordering y separating packets into «flows», and using a single processor for processing all the packets for a given flow. Packets are separated into flows by computing a hash value based on specific fields in each packet, and the resulting hash values are used to select a processor for processing the flow. This approach ensures that all packets belonging to a given TCP connection will be queued to the same processor, in the same order that they were received by the network adapter.

To set RSS:

netsh int tcp set global rss=enabled

Possible rss settings are: disabled, enabled, default (restores rss state to the system default).
Default state is: enabled
Recommended: enabled (if you have 2 or more processor cores and a NIC that can handle RSS)

TCP Chimney Offload

TCP chimney offload enables Windows to offload all TCP processing for a connection to a network adapter. Offloads are initiated on a per-connection basis. Compared to task offload, TCP chimney offload further reduces networking-related CPU overhead, enabling better overall system performance by freeing up CPU time for other tasks.

To set TCP Chimney Offload:

netsh int tcp set global chimney=enabled

Default state: disabled (under Vista), automatic (under Windows 7 and 2008 Server)
Recommended: enabled

The possible states are disabled, enabled, default (Vista), automatic (only Windows 7 and 2008 Server) as follows:

automatic — This default setting is only available under Windows 7 and 2008 Server, it is not available udner Vista. It offloads if the connection is 10 GbE, has a RTT < 20ms, and the connection has exchanged at least 130KB of data. The device driver must also have TCP Chimney enabled.
default — this setting restores chimney offload to the system default. Setting this «default» state under Windows 7 and 2008 Server is possible, but it sets the system to the «automatic» mode described above.
disabled — this setting is maually configured as disabled.
enabled — this setting is manually configured as enabled.

Notes:
Under Windows 7 and Server 2008 the «default» and the additional «automatic» parameter set the system to the same «automatic» state.
For Chimney Offload to work, it needs to be enabled in both the OS and NIC. To enable the «TCP Offloading» setting in your NIC, navigate to the Device Manager, under Network Adapters, in the Advanced tab, and check «Enabled» in the box next to the TCP offload entry.

Direct Cache Access (DCA)

Windows 7 and 2008 Server (but not Vista) add NETDMA 2.0 Direct cache access support. Direct Cache Access (DCA) allows a capable I/O device, such as a network controller, to deliver data directly into a CPU cache. The objective of DCA is to reduce memory latency and the memory bandwidth requirement in high bandwidth (Gigabit) environments. DCA requires support from the I/O device, system chipset, and CPUs.

To enable DCA:

netsh int tcp set global dca=enabled

Available states are: enabled, disabled.
Default state: disabled
Recommended: enabled (provided the CPU/Chipset/NIC support it)

It is also possible to enable this setting by editing the Windows Registry instead of using netsh as follows:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
EnableDCA=1 (DWORD, entry does not exist by default. Set to 1 to enable, 0 to disable)

Setting MTU

It is sometimes useful to view and set the MTU value for a specific network interface manually. To view a list of active network interfaces and their MTU values in Vista using netsh, open command prompt as administrator and execute the following command:

netsh interface ipv4 show subinterface

You will be presented with a list of interfaces, and their respective MTU values as follows:

To change the MTU value of a specific network card, type the following in command prompt:

netsh interface ipv4 set subinterface «network interface name» mtu=#### store=persistent

Where «network interface name» is your specific network adapter name as obtained above (or viewable under Network adapters), and mtu=#### is the desired MTU value.

For example, if the name of your network card is «Wireless Network Connection» and you’d like to set its MTU to 1500, you’d have to type:

netsh interface ipv4 set subinterface «Wireless Network Connection» mtu=1500 store=persistent

Note: The maximum MTU value is usually 1500, and up to 1492 for PPPoE connections.

Manually tuning Registry Parameters

Many of the registry keys tuning TCP/IP parameters from previous Windows versions no longer work in Vista and Server 2008. Below is a list of the few we’ve confirmed to still work. Note that for changes to these settings to take effect the computer needs to be rebooted. As always, a registry backup is recommended if making any changes, and some proficiency in using regedit is required.

In regedit (Start icon > Run > type: regedit  while logged in as administrator), you can navigate and edit the following keys.

MTU (Maximum Transmission Unit) — the maximum packet size.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersInterfaces{…}
MTU=1500 (DWORD, entry does not exist by default)

The {….} part of the above path is the unique identifier of your network adapter. You can recognize the correct adapter by looking at it’s IP address, if obtaining IP automatically labeled by: DhcpIPAddress=192.168.x.x text value, for example.

We recommend leaving this at default, unless you want to lower it. Vista uses the largest possible packet size for the underlying network by default.

Note: In some test environments, the correct MTU entry may be offset by 8. The 8 offset seems to coincide with the size of the PPPoE overhead. Check the result with the TCP Analyzer.

TCP 1323 Options

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
Tcp1323Opts=1 (DWORD, entry created automatically by Windows when you run the «netsh int tcp set global autotuninglvl=…» command, set to 0 by default).

Setting this seems to have no effect, since auto-tuning uses the TCP 1323 scale factor and changes it on the fly, disregarding this setting. Additional testing may be required to determine it’s effect if auto-tuning is turned off. Setting it to 1 is best for broadband connections. 

NetDMA (TCPA)

NetDMA enables support for advanced direct memory access. In essence, it provides the ability to more efficiently move network data by minimizing CPU usage. NetDMA frees the CPU from handling memory data transfers between network card data buffers and application buffers by using a DMA engine.

Under Windows 7, NetDMA can be set directly using the netsh interface (not available under Vista):

netsh int tcp set global netdma=enabled

Under Vista/2008/7, you can set NetDMA/TCPA using the following Registry parameter:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
EnableTCPA=1  (DWORD, not in registry by default. Set to 1 to enable, 0 to disable NetDMA)

Recommended setting is 1 (if not using Chimney Offload), zero otherwise. A new DWORD value may need to be created if not already present in the registry.

For NetDMA to work, it must be enabled in BIOS, your CPU must support Intel I/O Acceleration Technology (I/OAT), and it does not work together with Chimney Offload. More info available -here-

Checksum Offloading (DisableTaskOffload)

This NDIS 5 setting allows for reducing CPU load by offloading some tasks required to maintain the TCP/IP stack to the network card. Theoretically, Widnows should automatically detect capable network hardware.

The tasks offloaded are as follows:
— TCP/IP checksum calculation — each packet sent includes a verification checksum.
— TCP/IP segmentation — also known as «TCP Large Send» where Windows sends a large amount of data to the network card, and the NIC is then responsible for dividing it according to the network MTU. Experimental feature, not enabled by default
— IPSec Encryption cyphers and message digests — provides encryption of packets at the hardware level.

To change the checksum offloading setting in the Windows Registry:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
DisableTaskOffload=0 (DWORD value, default: not set, recommended: 0=enable offload, 1=disable offload)

Also see: MS KB 888750, MS KB 904946, MS KB 936702

DefaultTTL

TTL can be safely left alone in many cases. It is a limit to the time and number of hops/routers a packet will travel before being discarded. A number that’s too small risks packets being discarded before reaching their destination. A number that’s too large (over 128) will cause delay in when lost IP packets are discarded. 

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
DefaultTTL=64  (DWORD, set to a decimal value between 32 and 128. Recommended: 64) 

TcpMaxDataRetransmissions

Determines how many times unacknowledged data (non-connect segment) is retransmitted before TCP aborts the connection. The retransmission timeout is doubled with each successive retransmission on a connection. It is reset when responses resume.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
TCPMaxDataRetransmissions=7  (DWORD, recommended: between 3 and 10, not present in registry by default)

Note: When not present in the registry, the default behavior is 255 retransmissions (5 in documentation).

SynAttackProtect

This undocumented setting provides protection against SYN denial of service (DoS) attacks. When enabled, connections timeout sooner if SYN attack is detected. When set at 1, TCPMaxDataRetransmissions can be lowered further.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
SynAttackProtect=1  (DWORD, recommended: 1, not present in registry by default)

Network Throttling Index

By default, Windows Vista/7 implements a network throttling mechanism to restrict the processing of non-multimedia network traffic to 10 packets per millisecond (a bit over 100 Mbits/second). The idea behind such throttling is that processing of network packets can be a resource-intensive task, and it may need to be throttled to give prioritized CPU access to multimedia programs. In some cases, such as Gigabit networks and some online games, for example, it may be benefitial to turn off such throttling all together.

HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionMultimediaSystemProfile
NetworkThrottlingIndex=ffffffff  (DWORD, default: 10 hex, recommended: 10 hex for media sharing, ffffffff for gaming and max throughput, valid range: 1 through 70 decimal or ffffffff to completely disable throttling)

It is only recommended to change this setting in saturated Gigabit LAN environments, where you do not want to give priority to multimedia playback. Reportedly, disabling throttling by using ffffffff can also help reduce ping spikes in some online games.

Notes: Setting is available in Windows 7, Vista (SP1), 2008 Server. Default value is 10 under Windows 7, similar behavior if the setting is not present in the Registry.
Games that may be affected by this throttling: Source Engine games (TF2, Left 4 Dead, CS:S), HoN, CoD, Overlord series.

Reference: MSKB 948066

Set DNS and Hosts Priority

As with previous versions of Windows, one can improve DNS and hostname resolution by increasing the priority of of related services, while keeping their order. This is explained in more defail in our Host Resolution article. Lower numbers mean higher process priority. The corresponding registry settings in Vista are as follows:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipServiceProvider
LocalPriority=4  (DWORD, recommended: 4, default: 499) — local names cache
HostsPriority=5  (DWORD, recommended: 5, default: 500) — the HOSTS file
DnsPriority=6  (DWORD, recommended: 6, default: 2000) — DNS
NetbtPriority=7  (DWORD, recommended: 7, default: 2001) — NetBT name resolution, including WINS

TcpTimedWaitDelay (port allocation)

Short lived (ephemeral) TCP/IP ports above 1024 are allocated as needed by the OS. The default Vista values have improved from previous Windows versions, and are usually sufficient under normal load. However, in some instances under heavy load it it may be necessary to adjust the settings below to tweak the availability of user ports requested by an application.

If the default limits are exceeded under heavy loads, the following error may be observed: «address in use: connect exception».  By default under Vista (when the values are not presend in the registry), the OS can allocate up to 16384 ephemeral ports above port 1024, and the OS waits for 120 seconds before reclaiming ports after an application closes the TCP connection. This is a considerable improvement over older Windows versions. However, if necessary, the following registry values can be added/edited:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
MaxUserPort=65534 (DWORD, not in the registry by default. Recommended: leave at default, or use a number above 16384 up to 65534 decimal as necessary) —  maximum number of ports to use. 1024 is automatically subtracted from entered value to allow for reserved ports under 1024. 
TcpTimedWaitDelay=30 (DWORD, not present or 0xffffffff in registry by default. Recommended: 30 decimal, denoting 30 seconds) — time to wait before reclaiming ports, in seconds. Default time before reclaiming ports, if value is at 0xffffffff or not present in the registry is 120 seconds. Just reducing the delay is often sufficient without changing MaxUserPort, as it allows for reusing ports more efficiently.

Ephemeral ports can be checked and changed using netsh as well.

To query the current values, in command prompt, type:
netsh int ipv4 show dynamicportrange tcp (for UDP, use the same command, replacing only «tcp» with «udp» at the end)

To set both the starting, and max user port using netsh, in elevated command prompt run:
netsh int ipv4 set dynamicportrange protocol=tcp start=1025 num=64511 (start=NNN denoting the starting port, and num=NNN denoting the number of ports)

Notes:
By default, dynamic ports are allocated between ports 49152 and 65535 (for a total of 16384 ephemeral ports).
Using netsh allows to set both the starting port and port range. Editing the Registry allows for setting the port range, and the starting port is fixed at 1025. Deleting the MaxUserPort registry entry (or setting it to a value outside the allowed range) causes the OS to revert to using the default values.
Some system processes can install port filters to block certain port ranges. If ephemeral ports run into these filtered port ranges, TCP/IP applications will be unable to bind to any ports.

See also: TechNet article, MSKB 328476, MSKB 319502

QoS Reserved Bandwidth

As with Windows XP, nework adapters have a «QoS Packet Scheduler» enabled by default, which reserves 20% of bandwidth by default for QoS applications that request priority traffic. Note this only has effect in the presence of running QoS applications that request priority traffic. Registry value is undocumented for the Vista version of Windows. To customize this setting, in the Windows Registry:

HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindowsPsched
NonBestEffortLimit=0 (DWORD, not present in the registry by default. Recommended: 0 , possible values between 0 and 100) — indicates the percentage value of reserved bandwidth for QoS applications. Set to 0 to disable.

Notes: This tweak applies only to Windows versions that have Qos Packet Scheduler enabled. It will ONLY have effect in the presense of running QoS applications.

Network Memory Allocation (Event ID 2017 error)

When using Windows Vista/7 to serve many/large files over the local network, it is possible to sometimes run into memory allocation errors related to the Windows share. This can happen with Linux, Mac, or Windows XP clients. When this happens, you can usually see the following error in the Event Viewer System log:

Source: srv
Event ID: 2017
Level: Error
The server was unable to allocate from the system nonpaged pool because the server reached the configured limit for nonpaged pool allocations.

It is also possible to get an error indicating that: «Not enough server storage is available to process this command». To avoid those errors, you need to change the way Windows allocates memory for network services and file sharing. The below settings optimze the machine as a file server so it would allocate resources accordingly. There are two related registry settings:

HKLMSYSTEMCurrentControlSetControlSession ManagerMemory Management
LargeSystemCache=1 (DWORD, default value: 0, recommended value: 1)

A value of zero above establishes a cache of ~8 MB, a value of 1 allows the cache to expand to physical memory minus 4 MB, if needed.

HKLMSYSTEMCurrentControlSetServicesLanmanServerParameters
Size=3  (DWORD, default value: 1, recommended value: 3)

Size=1 minimizes used memory
Size=2 balance used memory
Size=3 optimal setting for file sharing and network applications

Note: Even though this tweak is from older Windows server OSes, it works on workstation versions, as well as Windows Vista and 7 (32 and 64 bit).

Gaming Tweak — Disable Nagle’s algorithm

The tweak below allows for tweaking or disabling Nagle’s alogrithm. Disabling «nagling» allows for very small packets to be transferred immediately without delay. Note that disabling Nagle’s algorithm is only recommended for some games, and it may have negative impact on file transfers/throughput. The dafault state (Nagling enabled) improves performance by allowing several small packets to be combined together into a single, larger packet for more efficient transmission. While this improves overall performance and reduces TCP/IP overhead, it may briefly delay transmission of smaller packets. Keep in mind that disabling Nagle’s algorithm may have some negative effect on file transfers, and can only help reduce delay in some games. To implement this tweak, in the registry editor (Start>Run>regedit) find:

This setting configures the maximum number of outstanding ACKs in Windows XP/2003/Vista/2008:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersInterfaces{NIC-id}
There will be multiple NIC interfaces listed there, for example: {1660430C-B14A-4AC2-8F83-B653E83E8297}. Find the correct one with your IP address listed. Under this {NIC-id} key, create a new DWORD value:
TcpAckFrequency=1 (DWORD value, 1=disable, 2=default, 2-n=send ACKs if outstanding ACKs before timed interval. Setting not present by default).

For gaming performance, recommended is 1 (disable). For pure throughput and data streaming, you can experiment with values over 2. If you try larger values, just make sure TcpAckFrequency*MTU is less than RWIN, since the sender may stop sending data if RWIN fills witout acknowledgement. 

Also, find the following key (if present):
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSMQParameters
Add a new DWORD value:
TCPNoDelay=1 (DWORD value, 0 to enable Nagle’s algorithm, 1 to disable, not present by default)

To configure the ACK interval timeout (only has effect if nagling is enabled), find the following key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersInterfaces{NIC-id}
TcpDelAckTicks=0  (DWORD value, default=2, 0=disable nagling, 1-6=100-600 ms). Note you can also set this to 1 to reduce the nagle effect from the default of 200ms without disabling it.

Notes:
Reportedly, the above gaming tweak (disabling nagle’s algorithm) can reduce WoW (World of Warcraft) latency by almost half!
XP/2003 needs hotfix or SP2 for it to work (MS KB 815230)
Vista needs hotfix or SP1 for it to work (MS KB 935458)
See also: NetworkThrottlingIndex setting above

SG TCP Optimizer (version 3.x)

The TCP Optimizer version 3.x allows for easy application of the above settings under all current Windows versions. This free software provides an intuitive interface for tunning your internet connection, backing up/restoring to the Windows defaults, etc. There is no installation required, you can just save it to the desktop, right-click > run as administrator and choose your settings. More detailed information about all available options is provided in the online documentation, answers to frequently asked questions are available in the Optimizer FAQ, and personalized help is available through our broadband tweaking forum.

SG TCP Optimizer download

For user convenience, we also provide a quick way to apply all optimal values as recommended above using our SG Vista TCP/IP Patch. It allows for tweaking all the above netsh settings and registry values in one simple step (with the exception of the «gaming tweak» section). The patch also provides for easily reverting the settings to their Windows default values. To apply, save to your desktop and run as administrator (right-click -> run as administrator). Click Y when prompted to apply settings.

Note: If for some reason Windows renames the file and adds .txt extension to it, you may have to manually rename it back to have a .cmd (or .bat) extension before running it as administrator. 

See Also

Windows Vista tcpip.sys connection limit patch for Event ID 4226 — removing the limit on half-open TCP connections.

References

Windows Server 2008 Network Shell (Netsh) Technical Reference
Microsoft KB951037

RFC 2581
Wikipedia: Nagle’s algorithm
Technet: TCPNoDelay
Technet: LargeSystemCache
MS KB 311833
MS KB 328890
MS KB 321098
MS KB 321169
MS KB 951037 — TCP Chimney Offload, Receive Side Scaling, and Network DMA in Windows Server 2008