The beyond hub is currently unreachable some functionality will be unavailable как исправить

The BYOND Hub is currently unreachable. Some functionality will be unavailable.

The BYOND Hub is currently unreachable. Some functionality will be unavailable.

ID:2716792

Seem to be getting this all the time at the moment, on version 514.1566. Can’t connect to games at all.

The BYOND Hub is currently unreachable. Some functionality will be unavailable.

  Sep 19 2021, 1:20 pm

The hub is verified up and running. Either it was a transient issue or it might be a problem with your ISP.

  Sep 19 2021, 4:21 pm

I’m getting this issue too. And I’ve never had it before.

  Sep 20 2021, 5:31 pm

Had to manually redownload and install the entirety of byond.

  Nov 12 2021, 8:34 pm

I reinstalled, and it ended up fixin some issues — but icons and SS13’s TGUI don’t load, still.

  Feb 4 2022, 6:07 pm

Currently having this problem on my hotspot. I’ve tried adding ports for it, deactivating my firewall, neither worked.

Help please?

  Feb 6 2022, 9:11 am

Try re-installing BYOND like the other guys.

You can also make sure to close out BYOND completely via the task manager.

Copyright © 2023 BYOND Software.
All rights reserved.

#1

Poldan

    Второй Б̴͡ар͢ха͘н҉̵̢д̡̢͝а̴̴͞р͢͝

  • Employee
  • 947 сообщений

Отправлено 19 November 2013 — 04:03

Может кто сталкивался ранее.
При попытке залогиниться бьонд сначала пишет validating… Затем, спустя немного времени, byond hub connection failed. Юзаю прокси.
Щито поделать?

АЧИВМЕНТ ГЕТ! Убить пришельца, будучи проглоченным им. [Телескопическая дубинка]

▲  ▲

  • Наверх


#2


Vadkop

Vadkop

    2D-космонавтик

  • Employee
  • 228 сообщений
  • Byond:Vadkop
  • Discord:Vadkop#3122
  • ГородЕхо

Отправлено 19 November 2013 — 05:20

Не юзать прокси? Я вот не юзаю, у меня все нормально. Можешь еще попробовать бйонд перекачать.

Изображение

Изображение

  • Наверх


#3


Poldan

Poldan

    Второй Б̴͡ар͢ха͘н҉̵̢д̡̢͝а̴̴͞р͢͝

  • Employee
  • 947 сообщений

Отправлено 19 November 2013 — 05:23

Не юзать прокси не получится. Бьонд перекачивать смысла нету.

АЧИВМЕНТ ГЕТ! Убить пришельца, будучи проглоченным им. [Телескопическая дубинка]

▲  ▲

  • Наверх


#4


Barka

Barka

    Truelight Seeker

  • Employee
  • 4933 сообщений
  • Discord:Sel-sama#9966
  • ГородElysium of Light

Отправлено 19 November 2013 — 05:27

С работки, небось, заходишь?

  • Наверх


#5


ACCount

ACCount

    Ветеран космонавтики

  • Employee
  • 2684 сообщений

  

Отправлено 19 November 2013 — 05:28

Вообще «юзаю прокси» как бы нихуя не значит. Какой прокси хотя бы? МБ порты режет?

Похоже, не коннектит к серверам бьёнда. Технически, даже если все сервера Бьёнда умрут, можно играть в эсэсочку гостем. На практике гостям на Анимус нет пути.

  • Наверх


#6


Poldan

Poldan

    Второй Б̴͡ар͢ха͘н҉̵̢д̡̢͝а̴̴͞р͢͝

  • Employee
  • 947 сообщений

Отправлено 19 November 2013 — 05:31

А то. Конечно, с работки.

АЧИВМЕНТ ГЕТ! Убить пришельца, будучи проглоченным им. [Телескопическая дубинка]

▲  ▲

  • Наверх


#7


Vadkop

Vadkop

    2D-космонавтик

  • Employee
  • 228 сообщений
  • Byond:Vadkop
  • Discord:Vadkop#3122
  • ГородЕхо

Отправлено 19 November 2013 — 05:33

Ну. А по форуму бйонда смотрел? Обнови бйонд, антивирус/фаервол проверь. И:

Цитата

Edit: I uninstalled BYOND, installed it again. And than restarted my computer. Now it’s working again!

Изображение

Изображение

  • Наверх


#8


Barka

Barka

    Truelight Seeker

  • Employee
  • 4933 сообщений
  • Discord:Sel-sama#9966
  • ГородElysium of Light

Отправлено 19 November 2013 — 05:53

Просмотр сообщенияPoldanNyan1992 (19 November 2013 — 05:31) писал:

А то. Конечно, с работки.

Ну значит порты закрыты. У меня такое же было из одной гостиницы. Я не стал вдаваться в подробности и забил. Читай какие порты и думай как пробрасывать.

  • Наверх


#9


Leshiy

Leshiy

  • Employee
  • 609 сообщений
  • Byond:Leshiy

Отправлено 19 November 2013 — 09:13

Вот тебе решение проблемы — используй программу FreeCap.
Весь фиг в том, что byond не умеет работать через проксю, по этому его нужно принудительно направить.
Вбивай там в настройках данные прокси, и добавляй запускатор byond’a.

  • Наверх


I started getting «channel not available» errors a couple weeks ago on our main (living room) DVR STB as well as pixelation, stuttering, and choppy audio; some channels are fine while most others are having these issues, seemingly depending on their frequency. We’ve had that particular box for about five years and never had any issues until now, and I can’t think of any event that would’ve caused the sudden errors.

It’s important to note that a secondary (bedroom) STB is functioning perfectly with no problems whatsoever.

What I’ve tried so far, with no luck:

  • replacing the STB
  • rebooting both the old and new STB (a half-dozen times over the last week)
  • re-plugging the coax cables
  • unpplugging/replugging the STB’s power cord after a few minutes
  • replacing the splitter outside (between the ONT and the cables leading to the two STBs) with the exact same branded type from Verizon
  • replacing the coax cable going from the wall to the STB

Additional info…

  • The lights on the battery backup and ONT are all green.
  • OnDemand stuff appears fine for the most part, with some glitchiness here and there.
  • A technical support call indicated no apparent problems leading up to the house, and suggested the problem is local and/or isolated to my residence.
  • Using the info panel, the «not available» channels on the problematic STB have SNR Levels of «n/a» and SNR Values of «0». The channels that do work come up as FAIR/31db. The OoB Data lists FAIR/19db.
  • The secondary perfectly fine STB has all channels working at GOOD/36db, with OoB of GOOD/23db.
  • Internet and phone appear fine, for whatever it’s worth.

I’ll see if I can drag the working secondary STB down to where the first one is, hook it up, and see if it works in place of the offending STB. I assume it won’t, since everything seems to be pointing to an issue with a coax cable… Maybe the cable running from the splitter outside the house and through the wall into the jack (before it reaches the portion that I replaced) has gone bad, perhaps?

Unless you guys can think of anything else to try, I’m thinking a tech needs to come out to isolate the actual problem. But is there anything else I should be trying?

Thanks for any ideas, advice, etc.

Понравилась статья? Поделить с друзьями:
  • The battle for middle earth tm launcher error
  • The battle cats ошибка hgt00
  • The error is printed in terse mode because there was error during formatting
  • The battery is imbalance как исправить
  • The error information was collected to the reports folder перевести