The mapped network drive could not be created because the following error has occurred перевод

инструкции

To Fix (The mapped network drive could not be created…) error you need to follow the steps below:
Шаг 1:
Download (The mapped network drive could not be created…) Repair Tool
Шаг 2:
Нажмите «Scan» кнопка
Шаг 3:
Нажмите ‘Исправь все‘ и вы сделали!
Совместимость: Windows 10, 8.1, 8, 7, Vista, XP Загрузить размер: 6MB Требования: Процессор 300 МГц, 256 MB Ram, 22 MB HDD Limitations: This download is a free evaluation version. Full repairs starting at $19.95.

Примечание:
Эта статья была обновлено на 2023-02-04 и ранее опубликованный под WIKI_Q210794

Meaning of The mapped network drive could not be created…?

Trying to connect to a network source may sound easy but it can’t help to encounter a problem once in awhile. Your network connection may not be properly configured or there is technical failure. Other times, there is no connectivity on your end. These errors are common examples of network error. It appears when there is something wrong during connection hence it cannot reach its end source. Still, these errors indicate the nature of the issue to help you resolve it.

Список общих сетевых ошибок:

• Сетевой кабель не подключен
• Адреса конфликтов IP-адресов уже используются
• Не удается найти сетевой путь
• В сети существует повторяющееся имя
• Ограниченное или отсутствие подключения
• Связанный с ограниченным доступом
• Ошибка «Не удалось подключиться к сети» -3
• Ошибка «Не удалось установить VPN-соединение» 800

If you want to download and use apps for your computer, you can visit the Windows Store, Microsoft’s official marketplace. There are a number of apps to choose from and download anytime. But, chances are, there are app errors that you will encounter while using or installing the apps. Some apps will fail to install while others will not run or create any update. Other apps will simply crash. Still, there are also fixes to resolve the issues. You can clear your cache, run a troubleshooter or reset the apps. The idea is not to panic when you encounter an app error. An easy fix will often help.

Causes of The mapped network drive could not be created…?

Наблюдение сетевой ошибки, когда вы находитесь во временных ограничениях, может быть раздражающим, но до сих пор существуют решения для этих ошибок. После появления сообщения об ошибке вы можете нажать кнопку «Диагностика» с помощью мастера Windows, чтобы запустить диагностику проблемы. Через несколько минут Windows покажет вам причину проблемы, а также предоставит правильные решения. Тем не менее, бывают случаи, когда Windows может не дать вам ответы на все вопросы, поэтому вам нужно исправить это вручную. Во-первых, вам нужно изменить настройки адаптера. Найдите настройки в центре «Сеть и общий доступ». Во-вторых, сбросьте TCP / IP. При изменении настройки адаптера вы можете изменить TCP / IP. В-третьих, необходимо удалить сетевые адаптеры, чтобы вы могли сканировать и применять любые изменения в оборудовании.

Загрузка новых и обновленных приложений в Windows Store может быть интересной, пока вы не столкнетесь с ошибкой приложения. К счастью, существует несколько способов устранения этих ошибок. Простым способом является проверка настроек времени и даты. Зачастую обновления не работают, потому что ваше время и дата неверны.

Если он все еще не работает, попробуйте выполнить следующие другие исправления:

• Сбросьте свой кэш Windows Store с помощью команды WSRESET
• Удаление временных файлов
• Используйте средство устранения неполадок приложений Windows Store для сканирования и обнаружения проблем
• Очистить кеш-память
• Сбросьте компоненты Windows Update
• Редактирование реестра для ошибок подключения
• Перерегистрируйте Windows Store

More info on
The mapped network drive could not be created…

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

And she can

We have 4 networked computers, with different credentials even if names are the same the Sid isn’t. 3 Windows 10 and an Ubuntu. Any get on my computer.

Now when I attempt to go to her drive using that format I get this error:

There is no problem getting on any of the other computers. Create a new share outside the ideas? Trying to connect to a share that’s in the user profile is hard profile see if that works

If you have done an update it in effect a new PC as even as admin on the PC by default you have no access.

Удаленный рабочий стол и подключенный сетевой диск в домашней сети случайным образом теряет связь

На самом деле мой основной компьютер (Win 7) — оба компьютера локальны друг другу. Он может, очевидно, использовать Bitdefender. Никакая разница с рабочим столом не является моим основным методом доступа. В этих ситуациях я даже не могу проверить IP-брандмауэр Media PC, который временно отключен.

If I then muck around with deleting I have a Win 8.1 PC which hosts all my media and documents, found’ and for remote desktop ‘Remote Desktop can’t find the computer ‘MediaServer». This might

означает, что он не разделяет и не пересоединяется, он иногда снова соединяется. Это не решение, поскольку мне нужно выполнить ping маршрутизатор.

belong to the specified network …» etc. As I mentioned, sometimes it connects fine with which I connect to via remote desktop and share a drive on the network. Both PCs appreciated! Today — no, can’t cannot find it on the network anywhere.

Ошибка, которую я получаю, — «Сетевой путь не был этим (хотя, это раздражает), но сегодня это не так. Любой адрес справки

(тайм-аут), а также не может ПК-ПК на ПК. Но он находится в сети — я могу подключить через мой мобильный телефон доступ к общему диску на моем основном ПК.

---

подключенный сетевой диск и сетевой принтер в автономном режиме

Принтером является HP officejet 7110, и в то время как третий имеет выигрыш 7. Поэтому проблема заключается только в comp #1, что я думаю, что эти две проблемы связаны. фактически имеет этот диск физически в своей собственной системе. Я сопоставил comp # 1, а Y — диск на comp # 1.

Я отправляю это снова, потому что еще одна вещь. Интересно, что эти два, когда они оказались, были в сети, а Z: не было. Поэтому, когда я запускаю компьютер (назовем его comp on, есть принтер и сопоставленный диск онлайн.

Поэтому мне нужно щелкнуть диск на comp # 2. Comp #1 запускает 8.1 на нем, чтобы разбудить его. Я перезапустил comp # 1 и Y: pro со всеми последними обновлениями.

Когда я открываю win explorer I #1) мой сетевой диск отключен, как сетевой принтер. Сегодня я тестировал, и ни одно из решений не помогло.

---

что такое подключенный сетевой диск?

краткое описание этого ..
может кто-нибудь дать мне спасибо.

---

Связанный сетевой диск

Отправлено как Z: общая папка на моем win me pc …

---

Не удается получить доступ к подключенному сетевому диску

Жесткий диск физически подключен к рабочему столу.

---

Установленный сетевой диск Reg Mapped

Уважаемые господа,
Сначала я хочу, чтобы внедренный сопоставил этот диск, когда я дважды щелкнул мышью. Он будет ОТКРЫТОСЬ с этим нравится. Пожалуйста, помогите.

---

Установленный сетевой диск Reg Mapped

Добрые пожелания
Шива
 

---

Отключенный сетевой диск

---

Не удается удалить подключенный сетевой диск

I have a drive letter «M:» mapped I get: «M: Not accesible, drive is not ready».

---

Отключение подключенного сетевого накопителя

---

Не удается открыть подключенный сетевой диск.

One Dell running XP Pro, and two HP laptops (wireless) one ideas? There is a shared external hard drive conneced via USB ideas? I get an error that says «Windows cannot access the specified device, path, or file.

to the XP, which I have mapped to both Vistas. There is a shared external hard drive conneced via USB networked together via a Linksys Wireless Router. Any Any I get an error that says «Windows cannot access the specified device, path, or file.

У меня все проблемы решены (при запуске Vista Ultimate x64 и другой версии Vista Home Premium x32.Я вижу это, когда открываю «Мой компьютер», но когда я нажимаю на нее вместе с помощью беспроводного маршрутизатора Linksys. Одна из Dell работает под управлением XP Pro, и два ноутбука HP (беспроводной), которые я обнаружил до сих пор), кроме одного. У меня все проблемы решены (что для XP, который я сопоставил с обоими Vistas.

---

не может получить доступ к подключенному сетевому диску

Затем я нажимаю кнопку Brwose для просмотра дисков, я нашел, что он успешно работает с именем пользователя и паролем. После того, как я это сделал, он просто отображает локальные диски, отображаемый диск не отображается!

---

Не удается подключиться к подключенному сетевому диску.

---

Проблема с сетевым диском

Привет, у меня проблема с подключенным сетевым диском, который продолжает рассказывать мне, но это внезапно дало мне эту проблему. Несколько дней назад работала, что дисковое пространство низкое, но на самом деле у него осталось 100 gb. Это произошло, когда я попытался скопировать некоторые файлы в него, но это не сработало. Я пробовал удалять вещи в нем, но он, похоже, не работает.

Кто угодно?
 

---

Скрытый сетевой диск исчез

Я использовал Vista всего одну неделю и очень ценю. Я сопоставляю диски, и они работают некоторое время, после чего они просто отключаются и

---

Мой сетевой диск не будет отображаться …?

Stumped!! to map j using the old server location. so it’s still using the old .bat file.. When the users log back in the drive I don’t know troubleshoot this problem i have been having with my network drive.

файл смотрит после того, как я его меняю. Таким образом, командный файл mapj настроен снова. Измените его на новый сервер, что-нибудь еще в файле .bat. Либо на диске c \ nmsu-las banner ..

Я должен изменить или сервер, или и то, и другое. Хорошо спасибо за ваше время и отключен, и мне нужно его переделать. И я зашел и отредактировал пакетный файл. О, и ваша строка 3rd имеет 2 diff ..

---

продолжайте проигрывать подключенный сетевой диск

---

Пароль подключенного сетевого диска

В настоящее время я загружаю все версии WIndows UPdates, также я проверил в «Управление компьютером» в разделе «Акции», JimmE (00)
и пароль администратора, и оставить поле passwor пустым, но не повезло. Опять же, я не задал никаких паролей. Я пробовал использовать собственный пароль пользователя

Все еще помогает оценить. Любая Microsoft, чтобы узнать, разрешает ли какая-либо из этих проблем. XP, чтобы узнать, есть ли там другой пароль. Все еще ничего. Спасибо в «Нет идей»?

---

Индексирование подключенного сетевого диска

---

Справка, переназначенная перегрузка сетевого диска …

у меня есть

---

Warning: The retired, out-of-support Internet Explorer 11 desktop application is scheduled to be permanently disabled through a Microsoft Edge update on certain versions of Windows 10 on February 14, 2023.

For more information, see aka.ms/iemodefaq.

We highly recommend setting up IE mode in Microsoft Edge and disabling IE11 prior to this date to ensure your organization doesn’t experience business disruption.

Introduction

This article describes issues that occur after you install Internet Explorer 10 on a Windows 7-based, Windows 8-based, Windows Server 2008 R2-based or Windows Server 2012-based computer.

Symptoms

Issue 1

Consider the following scenario:

• You select the Keep me signed in option, and then you log on to a SharePoint server.

• You access the data in a SharePoint Document Library.

• You try to map a network drive to the SharePoint Document Library.

In this scenario, the operation fails, and you receive the following error message:

The mapped network drive could not be created because the following error has occurred:

Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.

Issue 2

Assume that you access the date in a SharePoint Document Library. Then, you click Open with Explorer View when you view a SharePoint Document Library in Internet Explorer 10. In this situation, the operation fails, and you receive one of the following error messages.

Error message 1

Your client does not support opening this list with Windows Explorer.

Error message 2

We’re having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and try again.
 

Notes

• These issues occur only when the SharePoint server is configured for cookie-based authentication, such as SharePoint Online.

• You may encounter a similar issue when you use other Web Distributed Authoring and Versioning (WebDAV) servers that are configured for cookie-based authentication.

Resolution

To resolve this issue in Windows 8 or Windows Server 2012, install update rollup 2903938, or install the hotfix that is described in this article. For more information about how to obtain update rollup 2903938, click the following article number to view the article in the Microsoft Knowledge Base:

2903938 Windows RT, Windows 8, and Windows Server 2012 update rollup: December 2013
To resolve this issue in Windows 7 SP1 or Windows Server 2008 R2 SP1, install the update or the hotfix that is described in this article.

Update information

How to obtain this update

Windows Update

This update is available from Windows Update. This update is also available at Microsoft Update Catalog.

Microsoft Download Center

The following files are available for download from the Microsoft Download Center:

Operating system	Update
All supported x86-based versions of Windows 7	Download the update package now.
All supported x64-based versions of Windows 7	Download the update package now.
All supported x64-based versions of Windows Server 2008 R2	Download the update package now.

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services
Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Prerequisites

To apply this hotfix, you must be running Windows 7 Service Pack 1 (SP1), Windows Server 2008 R2 SP1, Windows 8 or Windows Server 2012. For more information about how to obtain a Windows 7 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
 

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2
 

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 7 and Windows Server 2008 R2 file information note

• The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

  Version	Product	SR_Level	Service branch
  6.1.760 1.18xxx	Windows 7 and Windows Server 2008 R2	SP1	GDR
  6.1.760 1.22xxx	Windows 7 and Windows Server 2008 R2	SP1	LDR

• GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.

• The MANIFEST files (.manifest) that are installed for each environment are listed separately in the «Additional file information for Windows 7» section. MANIFEST files and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows 7

File name	File version	File size	Date	Time	Platform
Davclnt.dll	6.1.7601.18201	81,920	4-Jul-13	11:51	x86
Davclnt.dll	6.1.7601.22376	89,088	4-Jul-13	11:54	x86
Mrxdav.sys	6.1.7601.18201	115,712	4-Jul-13	9:48	x86
Mrxdav.sys	6.1.7601.22376	116,736	4-Jul-13	10:01	x86
Webclnt.dll	6.1.7601.18201	205,824	4-Jul-13	11:57	x86

For all supported x64-based versions of Windows 7 and of Windows Server 2008 R2

File name	File version	File size	Date	Time	Platform
Davclnt.dll	6.1.7601.18201	102,400	4-Jul-13	12:50	x64
Davclnt.dll	6.1.7601.22376	110,592	4-Jul-13	12:10	x64
Mrxdav.sys	6.1.7601.18201	140,800	4-Jul-13	10:11	x64
Mrxdav.sys	6.1.7601.22376	141,824	4-Jul-13	9:54	x64
Webclnt.dll	6.1.7601.18201	259,584	4-Jul-13	12:57	x64
Webclnt.dll	6.1.7601.22376	264,704	4-Jul-13	12:16	x64
Mrxdav.sys	6.1.7601.18201	115,712	4-Jul-13	9:48	x86
Mrxdav.sys	6.1.7601.22376	116,736	4-Jul-13	10:01	x86
Davclnt.dll	6.1.7601.18201	81,920	4-Jul-13	11:51	x86
Davclnt.dll	6.1.7601.22376	89,088	4-Jul-13	11:54	x86
Webclnt.dll	6.1.7601.18201	205,824	4-Jul-13	11:57	x86
Webclnt.dll	6.1.7601.22376	209,408	4-Jul-13	11:59	x86

Windows 8 and Windows Server 2012 file information notesImportant Windows 8 and Windows Server 2012 hotfixes are included in the same packages. However, only «Windows 8» is listed on the Hotfix Request page. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under «Windows 8» on the page. Always refer to the «Applies To» section in articles to determine the actual operating system that each hotfix applies to.

• The files that apply to a specific product, milestone (RTM,SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

  Version	Product	Milestone	Service branch
  6.2.920 0.16 xxx	Windows 8 and Windows Server 2012	RTM	GDR
  6.2.920 0.20 xxx	Windows 8 and Windows Server 2012	RTM	LDR

• GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.

• The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the «Additional file information for Windows 8 and Windows Server 2012» section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows 8

File name	File version	File size	Date	Time	Platform
Davclnt.dll	6.2.9200.16700	86,016	26-Aug-2013	22:28	x86
Davclnt.dll	6.2.9200.20808	86,016	27-Aug-2013	04:20	x86
Webclnt.dll	6.2.9200.16700	199,168	26-Aug-2013	22:29	x86
Webclnt.dll	6.2.9200.20808	199,168	27-Aug-2013	04:22	x86

For all supported x64-based versions of Windows 8 and of Windows Server 2012

File name	File version	File size	Date	Time	Platform
Davclnt.dll	6.2.9200.16700	104,448	27-Aug-2013	05:19	x64
Davclnt.dll	6.2.9200.20808	104,960	27-Aug-2013	05:16	x64
Webclnt.dll	6.2.9200.16700	227,840	27-Aug-2013	05:21	x64
Webclnt.dll	6.2.9200.20808	227,840	27-Aug-2013	05:18	x64
Davclnt.dll	6.2.9200.16700	86,016	26-Aug-2013	22:28	x86
Davclnt.dll	6.2.9200.20808	86,016	27-Aug-2013	04:20	x86
Davclnt.dll	6.2.9200.16700	86,016	26-Aug-2013	22:28	x86
Davclnt.dll	6.2.9200.20808	86,016	27-Aug-2013	04:20	x86
Webclnt.dll	6.2.9200.16700	199,168	26-Aug-2013	22:29	x86
Webclnt.dll	6.2.9200.20808	199,168	27-Aug-2013	04:22	x86

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the «Applies to» section.

More Information

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
 

824684 Description of the standard terminology that is used to describe Microsoft software updates
 

Additional file information

Mapped network drive may fail to reconnect in Windows 10, version 1809

This article provides a workaround for the issue that mapped network drive may fail to reconnect in Windows 10, version 1809.

Applies to: В Windows 10, version 1809
Original KB number: В 4471218

Symptoms

You experience the following issues in Windows 10, version 1809:

• In Windows Explorer, a red X appears on the mapped network drives.
• Mapped network drives are displayed as Unavailable when you run the net use command at a command prompt.
• In the notification area, a notification displays the following message:

Could not reconnect all network drives.

Workaround

Microsoft is working on a resolution and estimates a solution will be available by the end of November 2018. Monitor the mapped drive topic in the Windows 10 1809 Update History KB 4464619. Currently, you can work around this issue by running scripts to automatically reconnect mapped network drive when you log on the device. To do this, create two script files, and then use one of the workarounds, as appropriate.

Create a script file named MapDrives.cmd

The file should be run at a regular but not at an elevated command prompt because it should be run at the same privilege as Windows Explorer:

Create a script file named MapDrives.ps1

The file should be run at a regular but not at an elevated command prompt because it should be run at the same privilege as Windows Explorer:

Workarounds

All workarounds should be executed in standard user security context. Executing scripts in an elevated security context will prevent mapped drives from being available in the standard user context.

Workaround 1: Create a startup item

This workaround works only for the device that has network access at logon. If the device has not established a network connection by the time of logon, the startup script won’t automatically reconnect network drives.

1. Copy the script file (MapDrives.cmd) to the following location:
   %ProgramData%MicrosoftWindowsStart MenuProgramsStartUp
2. Copy the script file (MapDrives.ps1) to the following location:
   %SystemDrive%Scripts
3. A log file (StartupLog.txt) will be created in the %TEMP% folder.
4. Log off, and then log back on to the device to open the mapped drives.

Workaround 2: Create a scheduled task

A PowerShell window flashes up when the scheduled task runs.

Источник

Warning: The retired, out-of-support Internet Explorer 11 desktop application is scheduled to be permanently disabled through a Microsoft Edge update on certain versions of Windows 10 on February 14, 2023.

For more information, see aka.ms/iemodefaq.

We highly recommend setting up IE mode in Microsoft Edge and disabling IE11 prior to this date to ensure your organization doesn’t experience business disruption.

Introduction

This article describes issues that occur after you install Internet Explorer 10 on a Windows 7-based, Windows 8-based, Windows Server 2008 R2-based or Windows Server 2012-based computer.

Symptoms

Issue 1

Consider the following scenario:

You select the Keep me signed in option, and then you log on to a SharePoint server.

You access the data in a SharePoint Document Library.

You try to map a network drive to the SharePoint Document Library.

In this scenario, the operation fails, and you receive the following error message:

The mapped network drive could not be created because the following error has occurred:

Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.

Issue 2

Assume that you access the date in a SharePoint Document Library. Then, you click Open with Explorer View when you view a SharePoint Document Library in Internet Explorer 10. In this situation, the operation fails, and you receive one of the following error messages.

Error message 1

Your client does not support opening this list with Windows Explorer.

Error message 2

We’re having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and try again.

These issues occur only when the SharePoint server is configured for cookie-based authentication, such as SharePoint Online.

You may encounter a similar issue when you use other Web Distributed Authoring and Versioning (WebDAV) servers that are configured for cookie-based authentication.

Resolution

To resolve this issue in Windows 8 or Windows Server 2012, install update rollup 2903938, or install the hotfix that is described in this article. For more information about how to obtain update rollup 2903938, click the following article number to view the article in the Microsoft Knowledge Base:

2903938 Windows RT, Windows 8, and Windows Server 2012 update rollup: December 2013
To resolve this issue in Windows 7 SP1 or Windows Server 2008 R2 SP1, install the update or the hotfix that is described in this article.

Update information

How to obtain this update

Windows Update

This update is available from Windows Update. This update is also available at Microsoft Update Catalog.

Microsoft Download Center

The following files are available for download from the Microsoft Download Center:

All supported x86-based versions of Windows 7

All supported x64-based versions of Windows 7

All supported x64-based versions of Windows Server 2008 R2

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services
Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Prerequisites

To apply this hotfix, you must be running Windows 7 Service Pack 1 (SP1), Windows Server 2008 R2 SP1, Windows 8 or Windows Server 2012. For more information about how to obtain a Windows 7 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 7 and Windows Server 2008 R2 file information note

The files that apply to a specific product, milestone (RTM, SP n), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

Windows 7 and Windows Server 2008 R2

Windows 7 and Windows Server 2008 R2

GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.

The MANIFEST files (.manifest) that are installed for each environment are listed separately in the «Additional file information for Windows 7» section. MANIFEST files and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows 7

Источник

Map network drive error

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

Error message:

The mapped network drive could not be created because the following error has occurred: An extended error has occurred.

Things I have checked:

Time/date on server and local machine

User account can map them successfully on other PCs

Only a problem when using the fully qualified path to the server. Mapping by IP address works.

Flushed and re-populated DNS cache

Rebooted multiple times

Logon script that normally maps drives is correct

Answers

What the error code or message you get in your issue? Is there some event logs related to the issue?
You may run “net use” command. For example:
To assign the disk-drive device name E: to the Letters shared directory on the \Financial server, type:
net use e: \financialletters
Meanwhile, please open an elevated command and refresh DNS and reset Winsock.
>ipconfig /flushdns
>netsh winsock reset

I suggest you post the error code or event logs in the forum.

1. What you get when you issue

2. Would you catch the network traffic by network monitor.

3. Are there any traces in Event logs?

What the error code or message you get in your issue? Is there some event logs related to the issue?
You may run “net use” command. For example:
To assign the disk-drive device name E: to the Letters shared directory on the \Financial server, type:
net use e: \financialletters
Meanwhile, please open an elevated command and refresh DNS and reset Winsock.
>ipconfig /flushdns
>netsh winsock reset

I suggest you post the error code or event logs in the forum.

The mapped network drive could not be created because the following error has occurred: An extended error has occurred.

That is the error message, word for word. It’s not very helpful, is it. No code or description or anything. No event log that I can find (weird). Like I said, I already tried to flush DNS. Just tried to reset winsock and it didn’t change anything, either. Net use produces the exact same results as mapping through windows explorer.

Unfortunately I’m going to have to call this issue closed, it was the CEO’s PC and he just got fed up and had us buy him a new one. He needed it anyways, the computer was pretty old and slow. Thanks for the help.

This solved the problem for me:

(When I did net use \servershare I got this error: System error 2148073478 has occurred.)

Yes this worked perfectly for me

This fixed it for me.

For some reason, a user suddenly cannot use the «NET USE» command to map network drives. Windows logon is working, but accessing network shares become very strange, with «System Error 2221 has occurred» message. This probably is a stored credential problem. I also got error when trying to use a UNC path with the DNS name «\Server1Share1′ but it will work if you use an IP based path «\192.168.0.123share1»

SOLUTION: Press your Windows’ Start / Launch, in «Search programs and files» field type «Credential Manager» and you should see it shows up on the list. Run it.

Check the stored credentials and remove related credentials, by click on the «Remove from vault». Now, try your NET USE command to map drives again.

Источник

Map network drive error

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

I asked this question in the regular Microsoft Community but was pointed here «. The issue that you are facing is more complex than what is typically answered in the Microsoft Answers forums. It is better suited for the IT Pro audience on TechNet.»

I apologise in advance if I am in the wrong area.

I have been a Skydrive/Onedrive user since the beginning and have mapped Skydrive/Onedrive and have been using it this way. However, a few months ago the mapping stopped working, meaning that I could not access the Skydrive/Onedrive account via File Explorer. In the past when this would happen, as it would happen from time to time, I would remove it, go to Credentials, delete the id & login details, and go through the mapping process again. It would map and I would go from there.

However, a few months ago it stopped working again. So I went through my old steps, deleting the mapping, deleting the credentials, and then re-mapping, but I continually receive errors such as:

«The folder that you entered does not appear to be valid. Please choose another.’

The steps are correct, that I am undertaking, as again, I have been doing this for many years — https://d.docs.live.net/CID, but i continue to get the above error and cannot continue. My Web Client is ‘Started’, and everything seems to be correct.

Has something changed on OneDrive’s end and there is now a new process?

Surface Pro Gen 1

I am mapping a second OneDrive account to File Explorer and not my main account. Again, I have always had a second account which I share and have had this one mapped.

Источник

[{«Type»:»MASTER»,»Line of Business»:{«code»:»LOB57″,»label»:»Power»},»Business Unit»:{«code»:»BU058″,»label»:»IBM Infrastructure w/TPS»},»Product»:{«code»:»SWG60″,»label»:»IBM i»},»Platform»:[{«code»:»PF012″,»label»:»IBM i»}],»Version»:»6.1.0″}]