This site cannot be reached как исправить

Everyone runs into the occasional error while browsing the web. Some error codes, such as Error 404, are easy to understand. However, others like “This site can’t be reached” are much more vague and don’t offer any information on how to fix them.

There are several potential causes for the “This site can’t be reached” error in Google Chrome. Understanding what those causes are will help you decide what troubleshooting method(s) to use, so you can access the website you need.

In this article, we’ll talk about what causes the “This site can’t be reached” issue. Then we’ll go over five ways to fix it.

Let’s get to work!

Check Out Our Video Guide to Fixing the “This Site Can’t Be Reached” Error

What Causes the “This Site Can’t Be Reached” Error?

One of the reasons the “This site can’t be reached” error is so frustrating is that Chrome can be unclear about what causes it. Moreover, the message can appear alongside a broad range of error codes.

For example, you can get that notification if you run into the DNS_PROBE_FINISHED_NXDOMAIN error:

That same error message will also appear if your connection times out or if you encounter the ERR_CONNECTION_RESET code:

Clearly, Chrome uses the “This site can’t be reached” message as a catch-all description for a lot of errors. By and large, the most common causes are:

• Domain Name System (DNS) resolution errors
• Connections that time out
• An overall failure of your internet connection
• Misconfigured internet, network, or firewall settings

Although Chrome does suggest a few fixes within each error screen, there are a lot more ways that you can troubleshoot this issue.

How to Fix the “This Site Can’t Be Reached” Error (5 Ways)

For this section, we’re going to walk you through five ways (from least to most complicated) to troubleshoot the “This site can’t be reached” error. Let’s start with the simplest fix, which involves checking your connection.

1. Restart Your Internet Connection

Even if you have a working internet connection, the “This site can’t be reached” error can appear if there’s any type of error with it. Although it may sound too simple, restarting your router or modem can often resolve this problem quickly.

Since restarting your connection usually only takes a minute or two, this is the first solution you should try. Most internet service providers (ISPs) will recommend disconnecting your router’s power cable and waiting a full minute before reconnecting it. Once it’s back on, wait for your internet connection to reset, and then try re-accessing the website.

2. Disable Your Firewall and Antivirus

In many cases, your operating system’s (OS) built-in firewall — or whichever software you use — can block pages aggressively and prevent your computer from establishing a connection to them. The easiest way to figure out if that’s the problem is to temporarily disable your firewall and antivirus software, and try visiting the site again.

Depending on what OS you’re using, you’ll need to follow a different set of steps to disable the built-in firewall. You can use the following articles for guidance:

• How to Disable the Windows firewall
• How to Disable the Firewall in macOS

As for disabling your antivirus software, your settings will depend on the tool you’re using. In our experience, it’s rare for your firewall to block you from loading a website unless it’s truly dangerous.

If disabling your firewall and antivirus software doesn’t work, it’s time to try a different method. Don’t forget to reactivate both before moving on.

3. Clear Your Browser Cache

While you navigate the web, Chrome stores a lot of data and files from the websites you visit. Your browser stores those files in a local cache, so it doesn’t have to reload sites in full every time you visit them.

In some cases, you might run into the “This site can’t be reached” error due to problems with your cached files. To solve that issue, you’ll need to clear your browser cache.

Assuming that you’re using Chrome, you can do that by going to Settings > Privacy and Security > Clear Browsing Data and selecting the Cached Images and Files option:

Click on Clear Data,and that’s it. Wait for Chrome to do its thing, and then try to reload the website that was giving you problems earlier.

4. Flush Your DNS Cache

Your OS stores a lot of data from websites you visit. It also stores their IP addresses in what we call the “DNS cache.” That way, your browser doesn’t have to look up the same IPs through its DNS server whenever you want to establish a connection. If that sounds familiar, it’s because the DNS cache works similarly to your browser cache, only it stores different types of data.

That’s a fantastic feature that saves every user time. However, it can also lead to errors if your OS caches outdated information for a website. In that case, you’ll need to “flush” or reset your DNS cache.

Flushing your DNS cache is a lot simpler than it sounds. We have a full tutorial on flushing your DNS cache on all major operating systems and browsers, so go ahead and check it out. If this doesn’t work, you might need to change DNS servers, which we’ll cover in the next section.

5. Change Your DNS Servers

Your ISP automatically assigns you DNS servers for your connection. However, you can configure your internet settings to use a specific set of DNS servers.

In Windows, you can do this by navigating to Control Panel > Network and Internet > Network and Sharing Center, and then selecting the Change Adapter Settings option:

On the next screen, right-click on your active internet connection and select Properties. On the list that appears, select Internet Protocol Version 4 (TCP/IPv4), and click on Properties once more:

A new screen will pop up, including a section that enables you to set custom DNS server addresses. You can use the two fields in the screenshot below to enter the DNS server addresses you want to use:

In the screenshot, we’re using Google’s public DNS addresses, which are “8.8.8.8” and “8.8.4.4”. However, there are a lot of fantastic free DNS servers you can use.

If you’re using macOS, you can change your DNS settings by navigating to System Preferences > Network, selecting your network, and clicking on Advanced. Next, jump to the DNS tab:

You can add the custom DNS servers you want to use by clicking on the (+) icon. Once you configure your new DNS settings and press the OK button, you should be good to go.

Your internet connection should work just the same, but the “This site can’t be reached” error will hopefully be gone. In some cases, changing DNS servers may let you load sites faster and access websites that you couldn’t before.

Summary

Although the “This site can’t be reached” error can be annoying, it’s not that difficult to troubleshoot. In most cases, the error comes from problems with your internet connection or DNS and caching settings.

If you encounter the “This site can’t be reached” message, here are five ways to fix it from least to most complicated:

1. Restart your internet connection.
2. Disable your firewall and antivirus.
3. Clear your browser cache.
4. Flush your DNS cache.
5. Change your DNS servers.

Troubleshooting website errors can take some time. However, if you’re unable to fix them yourself, you can always reach out for support from your hosting provider. Check out our plans to learn more about the solutions we offer here at Kinsta!

Обновлено 2023 января: перестаньте получать сообщения об ошибках и замедлите работу вашей системы с помощью нашего инструмента оптимизации. Получить сейчас в эту ссылку

1. Скачайте и установите инструмент для ремонта здесь.
2. Пусть он просканирует ваш компьютер.
3. Затем инструмент почини свой компьютер.

Следующая ошибка Google Chrome «Этот сайт недоступен» — очень распространенная проблема, с которой сталкиваются пользователи Chrome. Проблема с этой ошибкой в ​​том, что она имеет разные коды ошибок. Наиболее распространенные коды ошибок, за которыми следует эта страница: err_connection_refused, DNS-адрес сервера не может быть найден и DNS_PROBE_FINISHED_NXDOMAIN. Каждый из этих кодов ошибок что-то означает, но для каждой из них нет конкретного решения.

Измените свой IPv4 DNS-адрес.

1) Щелкните правой кнопкой мыши значок сети на панели задач и выберите «Открыть общий доступ и центр сети».

2) Нажмите на ваши сетевые подключения.

3) Нажмите на Свойства.

4) Дважды щелкните по версии Интернет-протокола 4 (TCP / IPv4).

5) Введите адрес этого общедоступного DNS-сервера Google:

8.8.8.8
8.8.4.4

6) Установите флажок Подтвердить настройки на выходе. Затем нажмите ОК.

Перезапустите DNS-клиент

Нажмите Windows + R, затем введите «services.msc» и нажмите Enter, чтобы открыть окно «Службы».

2. Прокрутите вниз, пока не найдете «DNS-клиент» (нажмите D, чтобы легко его найти).

3. Щелкните правой кнопкой мыши на DNS-клиенте и выберите «Перезагрузить».

4. Теперь DNS-клиент будет перезагружен, перейдите к проверке, если вы можете восстановить эту страницу, не может быть достигнута ошибка в Google Chrome.

Модификация максимально разрешенной версии TLS

Перейдите в Браузер Google Chrome и введите в адресной строке «chrome: // flags». Прокрутите вниз, пока не найдете раскрывающийся вариант «Включена максимальная версия TLS». Выберите версию 1.3, которая ранее была установлена ​​по умолчанию.

После настройки перезапустите браузер. Нет необходимости нажимать кнопку сохранения, поскольку настройки сохраняются автоматически. Теперь откройте веб-страницу, которая показала вам ошибку. Я надеюсь, что он исчез, и вы будете перенаправлены на сайт, который хотите.

Сброс синхронизации профиля Google Chrome

Google Chrome синхронизирует профиль пользователя браузера с сервисами Google Cloud. Важно очистить этот синхронизированный кеш. Если пользователь не удалит синхронизированные настройки, поврежденные настройки всегда будут восстановлены для всех устройств, с которыми синхронизирован профиль пользователя Chrome, что может привести к появлению сообщения «Эта страница недоступна» на нескольких устройствах.

Откройте панель инструментов Google (откроется в новом окне браузера). Нажмите кнопку «Сбросить синхронизацию», чтобы удалить все синхронизированные данные на сервере Google, и подтвердите, нажав «ОК».

Перейдите к следующему шагу.

Разрешить предварительную выборку DNS.

Если вы получаете ошибку только с хромом, то вы можете выполнить эти шаги;

• Обязательно используйте обновленную версию Google Chrome для Windows.
• Откройте и перейдите в Настройки Chrome >> Показать дополнительные настройки >> Столбец конфиденциальности.
• Ищите «Используйте службу прогнозов, чтобы быстрее загружать страницы».
• Установите флажок, чтобы включить прогнозирование DNS.
• Просто перезапустите браузер Chrome и проверьте.

Заключение

Вы должны знать, что проблема не обязательно должна исходить от вас. Это может происходить со стороны сервера, где сайт недоступен из-за технических проблем. Поэтому попробуйте проверить сайт с разных устройств, и если то же самое произойдет, это не ваше устройство. Это веб-сайт, на котором произошла ошибка и отображается ошибка DNS-сервера. Поделитесь своим опытом о том, как исправить эту страницу с ошибкой «Эта страница недоступна» указана в поле для комментариев ниже.

https://stackoverflow.com/questions/53286770/this-site-can-t-be-reached-err-unexpected-in-chrome

Совет экспертов: Этот инструмент восстановления сканирует репозитории и заменяет поврежденные или отсутствующие файлы, если ни один из этих методов не сработал. Это хорошо работает в большинстве случаев, когда проблема связана с повреждением системы. Этот инструмент также оптимизирует вашу систему, чтобы максимизировать производительность. Его можно скачать по Щелчок Здесь

Сообщение Просмотров: 117

[Solved] “This Site Can’t Be Reached” Chrome Error Fix

The following Google Chrome error “This Site Can’t Be Reached” is a very common issue that Chrome users face. The thing about this error is that it comes with different error codes. The most common error codes followed by This Site Can’t Be Reached error are: err_connection_refused, Server DNS address could not be found, and DNS_PROBE_FINISHED_NXDOMAIN. Each of these error codes means something, but there is no specific solution for each one of them.

So, what causes the This Site Can’t Be Reached error in Chrome? Well, it can be anything related to either your Chrome settings, DNS settings, or Network Adapter Driver.

In the following article, we will see how to fix This Site Can’t Be Reached error in Chrome using 10 different methods. These are some sure shot methods that can fix This Site Can’t Be Reached errors with different types of error codes.

Fix 1- By Resetting TCP/IP

Resetting TCP/IP is another fairly simple method to quickly fix the site can’t be reached error on Chrome. In order to reset TCP/IP, carry out the following steps:

Step 1: Open Command Prompt in Administrator mode. To do so, press the Start button on your PC, and type cmd in the Start search box. The Command Prompt option will appear. Right click on it, and click on Run as administrator option. You will be prompted by User Account Control if you want to proceed with this operation; click Yes.

Step 2: Run the below mentioned commands in Command Prompt, one after another. To do so, type the first command “ipconfig /release” and press Enter. When the operation is complete, type the second command “ipconfig /all“, press Enter, and continue doing so, till you run the last command. Here is the list of commands you need to run:

After you have run all these commands, restart your PC and see if you are able to access the websites of your choice on Chrome. If not, try the next method.

Fix 2 – Change IPv4 DNS Address

IPv4 DNS Address is usually set to obtain DNS server address automatically or set to some DNS server address provided by your Internet Service Provider. At times, these can cause your Chrome to show This Site Can’t Be Reached Chrome Error. You can try to change it to Google DNS server address and it would most likely resolve your issue. Here’s how to do it:

Step 1: Press Windows Key + R together.

Step 2 – Now, write ncpa.cpl in it and Click OK.

Now, Internet Connection Status window will open. There, click on the Properties button.

Step 4: In the Properties window, under the Networking tab, look for Internet Protocol Version 4 (TCP/IPv4) option. When found, double-click on it.

Step 5: Here, you will see the option to set DNS Address manually. Select the Use the following DNS server address option if not selected, and enter the following Google public DNS server address as shown in the screenshot:

8.8.8.8
8.8.4.4

Note: Do not forget to select the Validate settings upon exit before you click the Ok button to apply DNS settings.

Now get back to Chrome and check if this fixed the This Site Can’t Be Reached error in Chrome for you. If it didn’t, try method #4 now.

Fix 3 – Check Automatically detect settings Option

1. Press Windows key + R together to Open RUN.

2. Now, Write inetcpl.cpl in it and Click OK.

3. Now, Click On Connections Tab.

4. Now, Click on LAN Settings.

5. Now, Make sure that Automatically Detect Settings Option is Checked. If it is Unchecked, please Check it.

6. Click on Ok.

Fix 4 – Allow DNS Prefetching to Fix This Site Can’t Be Reached Error

This is something you can do from your Chrome browser. To Allow DNS Prefetching, follow these steps:

Step 1: Open Chrome

Step 2: Go to chrome://settings/cookies

Step 3: Turn on Preload pages for faster browsing and searching.

Note: If you cannot find the Use a prediction service to load pages more quickly option under Privacy tab, then you will have to Update your Chrome to its latest version. Refer to Method #10 for steps to update Chrome.

Fix 6 – Run Windows Network Diagnostic to Fix Chrome Issue

Running Network Diagnostics will detect any problem related to networking and try to fix them if found. Here’s how you can run a network diagnostic:

Step 1: As mentioned in Method # 3, carry out Step 1 and Step 2.

Step 2: Click on the Diagnose button. This will run the Network Troubleshooter.

Once the diagnosis is complete, disconnect and reconnect the internet on your PC and give Chrome a try if the This Site Can’t Be Reached Error still shows up.

Fix 7 – Disabling Experimental QUIC Protocol in Chrome

In this method, you will have to disable a flag named Experimental QUIC Protocol to try and fix the issue. Follow these steps:

Step 1: In the address bar of Chrome, type chrome://flags/ and press Enter key.

Step 2: A page full of options will show up. Press Ctrl + F to evoke Find box. In there, type Experimental QUIC protocol to find it. The value for this flag would be set as Default in the drop-down menu. Change it to Disabled, restart Chrome, and check if this worked for you.

Fix 6 – Reset Chrome Settings

Resetting Chrome Settings to default can also fix the issue. To Reset, try these steps:

Step 1: In the address bar of chrome, type chrome://settings/reset and press Enter.

Step 2: Click on Reset settings to their original default option. Click on it to reset all Chrome settings.

Check if Chrome still returns This Site Can’t Be Reached error.

Fix 7 – Restart DNS Client Service

Restarting DNS Client Service is one of the primary steps to take in order to solve This Site Can’t Be Reached Chrome error. Follow these steps to restart DNS Client Service:

Step 1: Open the Run box by pressing Windows + R keys together. In the Run box, type the following command and press Enter:

Step 2: From the list of Services, look for DNS Client, and select it when found. Now, click on Restart the service option available at the left side of the window.

When the DNS Client service has restarted, go check if the website opens in Chrome. If it doesn’t try the next method.

Fix 8 – Reinstall Chrome

As a last resort, you may have to reinstall Chrome on your PC. Here’s how to do it:

Step 1: In the Start menu, type Apps & features to open the Apps & features window with all the installed software.

Step 2: Look for Google Chrome in the list, click on it, and click the Uninstall button.

Step 3: After uninstalling Chrome, open the Google Chrome website and download the latest version of Chrome. Install it and you should be able to access websites normally.

Finally,

when this Chrome error “This Site Can’t Be Reached” occurs, Chrome is barely at fault. And in case it is, then there’s a good probability that your Chrome is outdated. So, always make sure that you have the latest version of Chrome running on your PC to prevent this error from occurring.

Источник

В любом режиме запуска очень часто при переходе по различным URL адресам появляется ошибка.

В основном тестировал на MAIL.RU. Также после обновления чаще стали блокироваться аккаунты на «подозрение о взломе» со стороны мейл.ру.

В любом режиме запуска очень часто при переходе по различным URL адресам появляется ошибка.

Как повторить эту ошибку?

У меня такое же возникало, если прокси перестал работать. Помогает перезагрузка страницы.

Прокси мобильные, общие со сменой ip раз в 10 мин.

Скорее всего это происходит из за смены ip.

Брать для BAS прокси со сменой по времени это крах, если и ставить то на четко выверенный скрипт. А так только со сменой по api, и никак иначе.

Та же беда. Переустанавливал, перезагружал, отключал брандмауэр. Не помогает. Ошибка возникает при запуске RemoteExecuteScriptSilent. В режиме записи и запуска всё хорошо.

Ошибка постоянная, а не периодическая

Ошибка постоянная, а не периодическая

Да.
net::ERR_ADDRESS_INVALID
Прошу прощения, пару раз из 100 ошибка выскочила и в режиме записи.

@pluchar Ну если ошибка прямо постоянная, то стоит дать доступ поддержки к ПК

Источник

Исправлено: этот сайт не может быть достигнута ошибка в браузере Chrome

Обновление: Перестаньте получать сообщения об ошибках и замедляйте работу своей системы с помощью нашего инструмента оптимизации. Получите это сейчас на эту ссылку

Измените свой IPv4 DNS-адрес.

1) Щелкните правой кнопкой мыши значок сети на панели задач и выберите «Открыть общий доступ и центр сети».

2) Нажмите на ваши сетевые подключения.

3) Нажмите на Свойства.

4) Дважды щелкните по версии Интернет-протокола 4 (TCP / IPv4).

5) Введите адрес этого общедоступного DNS-сервера Google:

Ноябрьское обновление 2021:

6) Установите флажок Подтвердить настройки на выходе. Затем нажмите ОК.

Перезапустите DNS-клиент

Нажмите Windows + R, затем введите «services.msc» и нажмите Enter, чтобы открыть окно «Службы».

2. Прокрутите вниз, пока не найдете «DNS-клиент» (нажмите D, чтобы легко его найти).

3. Щелкните правой кнопкой мыши на DNS-клиенте и выберите «Перезагрузить».

4. Теперь DNS-клиент будет перезагружен, перейдите к проверке, если вы можете восстановить эту страницу, не может быть достигнута ошибка в Google Chrome.

Модификация максимально разрешенной версии TLS

Перейдите в Браузер Google Chrome и введите в адресной строке «chrome: // flags». Прокрутите вниз, пока не найдете раскрывающийся вариант «Включена максимальная версия TLS». Выберите версию 1.3, которая ранее была установлена ​​по умолчанию.

После настройки перезапустите браузер. Нет необходимости нажимать кнопку сохранения, поскольку настройки сохраняются автоматически. Теперь откройте веб-страницу, которая показала вам ошибку. Я надеюсь, что он исчез, и вы будете перенаправлены на сайт, который хотите.

Сброс синхронизации профиля Google Chrome

Google Chrome синхронизирует профиль пользователя браузера с сервисами Google Cloud. Важно очистить этот синхронизированный кеш. Если пользователь не удалит синхронизированные настройки, поврежденные настройки всегда будут восстановлены для всех устройств, с которыми синхронизирован профиль пользователя Chrome, что может привести к появлению сообщения «Эта страница недоступна» на нескольких устройствах.

Откройте панель инструментов Google (откроется в новом окне браузера). Нажмите кнопку «Сбросить синхронизацию», чтобы удалить все синхронизированные данные на сервере Google, и подтвердите, нажав «ОК».

Перейдите к следующему шагу.

Разрешить предварительную выборку DNS.

Если вы получаете ошибку только с хромом, то вы можете выполнить эти шаги;

Заключение

Вы должны знать, что проблема не обязательно должна исходить от вас. Это может происходить со стороны сервера, где сайт недоступен из-за технических проблем. Поэтому попробуйте проверить сайт с разных устройств, и если то же самое произойдет, это не ваше устройство. Это веб-сайт, на котором произошла ошибка и отображается ошибка DNS-сервера. Поделитесь своим опытом о том, как исправить эту страницу с ошибкой «Эта страница недоступна» указана в поле для комментариев ниже.

CCNA, веб-разработчик, ПК для устранения неполадок

Я компьютерный энтузиаст и практикующий ИТ-специалист. У меня за плечами многолетний опыт работы в области компьютерного программирования, устранения неисправностей и ремонта оборудования. Я специализируюсь на веб-разработке и дизайне баз данных. У меня также есть сертификат CCNA для проектирования сетей и устранения неполадок.

Источник

How to Fix the “This Site Can’t be Reached” Error in Google Chrome

While most of us are well aware of how to use our favorite internet browser to search up our most frequented websites, most of us don’t really know what to do when an error pops up instead of the website we were attempting to reach. In many cases, we may just close the internet browser and retry the search, double check the spelling of the website URL, or even try a different website browser. For Google Chrome users, the “this site can’t be reached” error can pop up if a website takes too long to respond and is down or if there is an internet connection problem. Instead of using a different browser or trying again at a later time, we are going to look at what this error code means, why it pops up, and outline proven methods you can use to fix the issue on your Windows computer. If you are a Mac or Android smartphone user, we have you covered as well.

What does the “This Site Can’t be Reached” error mean?

This error means exactly what it says, the website address you are trying to access cannot be reached with your search query. While it is quite possible that you just made a spelling error in entering the website address, in most cases, it is because there is another underlying issue occurring with your domain name system (DNS) server and the issue either needs to be fixed or it needs to be reset.

When does this error occur and why does it happen?

There are many potential underlying causes for this error, which means that the exact error message that shows up on the screen will vary, but the heading will either say “This site can’t be reached” or “This webpage is not available”.

The most common reason for the “this site can’t be reached” error to pop up is because of a DNS lookup failure. The DNS network accesses websites via their domain name, so the website URL you are used to inputting into the top search portion of your internet browser. When you hit Enter on your website browser, the browser will access the website through its internet protocol (IP) address, and the DNS network system is what does the translating from website domain name to internet protocol address. The DNS lookup failure occurs when there is a misconfiguration of the DNS address or when the Windows DNS client is not working.

While this is the most common reason for getting the “this site can’t be reached” error, it may also occur because:

In every case, Google Chrome gives you an explanation of the cause in the form of a description and an error code. Both of these can be found on the same screen, below the heading.

Typical error descriptions include:

Instead of “domain.com” you should see the website address that you tried to access.

The error description can already take you one step closer in understanding what went wrong, but the most important element for successful troubleshooting is the error code at the bottom. The error code usually consists of multiple words connected by underscores, and the best way to move forward is to look at the solutions for your specific error code.

We have dedicated articles covering all common error codes that can show up on a “this site can’t be reached” screen:

If you don’t see an error message on the screen or your error code is not in the list above, no need to worry either. In this article we have collected a set of universal solutions that will fix most of the “this site can’t be reached” and “this webpage is not available” errors.

11 Methods for Fixing “This Site Can’t be Reached” Error in Google Chrome

While the majority of the methods available for fixing this error in Google Chrome are targeted towards Windows computer users, those who are running a Mac or Android smartphone or tablet, may also run into this error. If you are a user with a Mac computer or an Android smartphone, please pop down to the bottom of the list for methods available to those devices, specifically.

1. Check your target website’s status

As your first step you should find out if the problem is with your system or the target website is down for everyone. Websites can go down for multiple reasons, including scheduled maintenance, visitor overload, DDoS attack, or any unexpected server failure. If a website is down for everyone, there is not much you can do except wait until the service is restored.

You can easily check the availability of a website with free online tools, such as WebsitePlanet, isitdownrightnow, and Downdetector. Choose any of these three and type in your target website’s address into the lookup tool to confirm its status.

If the website only appears to be down for you, move on to the next solution method.

2. Clear your browser cache

One of the easiest methods to fix “this site can’t be reached” error in Google Chrome is by clearing out your browser cache to see if the problem is occurring due to corrupted cookie files. Sometimes, the Google Chrome browser will serve up cached error pages instead and clearing the browser history will remove this problem.

3. Run the Windows Network Troubleshooter

You can also try running the network troubleshooter program to find and fix repairs with your wireless network connection.

4. Restart your router and modem

It’s entirely possible that the issue is not with your device, but rather with your router or modem. It can be a simple freeze or a temporary glitch that can be easily solved by a quick reset.

To properly reset your router and modem:

5. Reset Google Chrome

If clearing out the data from your Google Chrome does not work, you can try resetting your Chrome browser. If the error is popping up because of issues with browser extensions or browser settings, resetting the browser will eliminate these issues and stop the error from coming up.

6. Restart the DNS client

If the above two options do not work, move onto trying to resolve the DNS client by restarting it.

7. Change DNS servers

Sometimes you can fix this error by changing the DNS servers that you are using to access the internet. It is always recommended to use an alternative DNS address when your internet connection is slow.

8. Flush the DNS cache

When a DNS cache is invalid, it can cause the “this site can’t be reached” error. To fix this, you would need to flush out the old DNS cache and update it to the correct IP address.

9. Reset your TCP/IP address

You can always try resetting your TCP/IP configuration.

10. Update your network drivers

Outdated network drivers can result in all sorts of issues, including the “This site can’t be reached” error. Luckily, updating network drivers is fairly straightforward on Windows.

Note: Sometimes Windows fails to find the most up to date driver for a hardware component. If you suspect that this might be the case, it’s a good idea to visit the hardware manufacturer’s website and download the latest drivers manually.

11. Reinstall Chrome

If nothing has worked so far, as a last effort you can try reinstalling Google Chrome.

When you are logged into Chrome with a Google account the browser saves your bookmarks and extensions to the cloud, so you will not lose anything with a reinstall. Once you log in again, the browser will sync back everything, and you can continue from where you left off.

However, if you use Chrome without logging in, make sure to export your bookmarks and stored data before reinstalling.

To reinstall Chrome:

How to fix the “This site can’t be reached” error on Mac OS

For those who are Mac OS users, you will want to try changing the DNS or try changing the TCP/IP4. To change both of these, you will find the option to do so in your system preferences, network, and advanced settings of your Wi-Fi connection tab.

How to fix the “This site can’t be reached” error on Android

For Android smartphone users, you will want to try clearing your browser data or clearing out app data. To clear your history data, you will follow the same steps as you would on the computer. For clearing out app data, you will want to go to your settings and click on apps, find Google Chrome, and clear both the cache and data.

Conclusion

We hope that by this point you have managed to fix the “this site can’t be reached” error with one of the outlined methods. Let us know in the comments section what solution worked for you.

Home » Google Chrome » How to Fix the “This Site Can’t be Reached” Error in Google Chrome

24 thoughts on “How to Fix the “This Site Can’t be Reached” Error in Google Chrome”

Hi I need help.. I can’t reach my website. I can’t visit my website

What’s the website you are trying to reach?

My website is Instagram

It works. Thank you so much.

I have a website, it was working normally when I’ve opened it last night before sleeping. Today while taking breakfast, I opened my website in my mobile and it shows “this site can not be reached” I tried to open it in different phones it does’t work. I tried to open it in two different laptop but still showing the same error.
Means it showing error in all devices. can you explain how can I fix it now? and what problem may causing this issue?

This site can’t be reached
“my website’s” server IP address could not be found.
DNS_PROBE_FINISHED_NXDOMAIN

Источник

While most of us are well aware of how to use our favorite internet browser to search up our most frequented websites, most of us don’t really know what to do when an error pops up instead of the website we were attempting to reach. In many cases, we may just close the internet browser and retry the search, double-check the spelling of the website URL, or even try a different website browser. For Google Chrome users, the “This site can’t be reached” error can pop up if a website takes too long to respond, is down, or if there is an internet connection problem. 

Instead of using a different browser or trying again at a later time, we are going to look at what this error code means, why it pops up, and outline proven methods you can use to fix the issue on your Windows computer. If you are a Mac or Android smartphone user, we have you covered as well.

What does the “This Site Can’t be Reached” error mean?

This error means exactly what it says. The website address you are trying to access cannot be reached with your search query. It is quite possible that you just made a spelling error or typo while entering the website address, so make sure that you are indeed trying to reach a valid domain name. In most cases, however, the error is shown because there is an underlying issue with your domain name system (DNS) server, and it needs to be fixed.

Why do you see the “This Site Can’t be Reached” on Google Chrome?

There are many potential underlying causes for this error, which means that the exact error message that shows up on the screen will vary, but the heading will either say “This site can’t be reached” or “This webpage is not available.”

The most common reason for the “this site can’t be reached” error to pop up is a DNS lookup failure. Internet users like yourself access websites via their domain names, so the website URLs that you input into the top search portion of your internet browser. When you hit Enter on your website browser, the browser will access the website through its internet protocol (IP) address, and the DNS network system is what does the translating from the website domain name to the internet protocol address. A DNS lookup failure occurs, for example, when there is a misconfiguration in the DNS system or when the Windows DNS client is not working.

While this is the most common reason for getting the “this site can’t be reached” or the “this webpage is not available” error, it may also occur because:

• Your Google Chrome browser has cookie corruption or out-of-date settings.
• Your wireless network connection requires repairs.
• Your wireless adapters are out of date.
• Your antivirus is blocking the website.
• Your DNS cache is invalid.

In every case, Google Chrome gives you an explanation of the cause in the form of a description and an error code. You can find both of these on the same screen below the heading.

Typical error descriptions include:

• Domain.com’s server IP address could not be found
• Domain.com took too long to respond
• Check if there is a typo in domain.com

Instead of “domain.com” you should see the website address you tried to access.

The error description can take you one step closer to understanding what went wrong, but the most important element for successful troubleshooting is the error code at the bottom. The error code usually consists of multiple words connected by underscores, and the best way to move forward is to look at the solutions for your specific error code.

We have dedicated articles covering all common error codes that can show up on a “this site can’t be reached” or “this webpage is not available” screen:

• ERR_CONNECTION_CLOSED
• DNS_PROBE_FINISHED_NXDOMAIN
• ERR_CONNECTION_TIMED_OUT
• ERR_CONNECTION_RESET
• ERR_NAME_NOT_RESOLVED
• ERR_TUNNEL_CONNECTION_FAILED
• ERR_ADDRESS_UNREACHABLE
• ERR_CONNECTION_REFUSED
• ERR_CONNECTION_ABORTED

If you don’t see an error message on the screen or your error code is not in the list above, no need to worry. In this article, we have collected a set of universal solutions that will fix most of the “this site can’t be reached” and “this webpage is not available” errors.

Proven methods for fixing the “This site can’t be reached” error in Google Chrome

While the majority of the methods available for fixing this error in Google Chrome are targeted toward Windows computer users, those who are using a Mac or an Android device may also run into this error. Therefore, if you are a Mac computer or an Android smartphone user, please scroll down to the bottom of the list for methods available to those devices.

1. Check your target website’s status

As your first step, you should find out if the problem is with your system or the target website is down for everyone. Websites can go down for multiple reasons, including scheduled maintenance, visitor overload, DDoS attack, or any unexpected server failure. Unfortunately, if a website is down for everyone, there is not much you can do except wait until the owner restores the service.

You can easily check the availability of a website with free online tools, such as WebsitePlanet, isitdownrightnow, and Downdetector. Choose any of these three and type in your target website’s address into the lookup tool to confirm its status.

If the website only appears to be down for you, move on to the next solution method.

2. Clear your browser cache

One of the easiest methods to fix the “this site can’t be reached” error in Google Chrome is to clear out your browser cache to see if the problem occurs due to corrupted cookie files. Sometimes, the Google Chrome browser will serve up cached error pages instead, and clearing the browser history will remove this problem.

1. To do this, open up your Google Chrome browser on your computer, click the three dots in the top right-hand corner of the browser, choose the More tools option from the list, and then click on Clear browsing data. You can also just open up your Google Chrome browser and hit CTRL – SHIFT -DEL.
2. On the Settings window that pops up, under the time range drop-down menu, choose All time as the time range and then clear out your browsing history, cookies, and cached images via the Clear data button. You may need to checkmark all of these if they aren’t already selected.
3. Once you have done this, try reloading the webpage to see if the issue has cleared up.

3. Run the Windows Network Troubleshooter

You can also try running the built-in network troubleshooter function to find and fix repairs with your wireless network connection.

1. Type “Run” into your computer’s search bar via the Start Menu and open the run program module.
2. Type “ncpa.cpl” into the run program to open the network connections box.
3. Find your active internet connection in the network connections window, right-click it, and click the Diagnose option.
4. Give the network troubleshooter program some time to run. If the problem it finds is a “DHCP is not enabled for wireless network connection,” you will want to repair this problem as an administrator.
5. Click on “Try these repairs as an administrator,” and on the next prompt, apply the fix.
6. Reboot the computer to see if the issue is fixed.

4. Restart your router and modem

It’s entirely possible that the issue is not with your device but rather with your router or modem. It can be a simple freeze or a temporary glitch that a quick reset can easily solve.

To properly reset your router and modem:

1. Unplug the power cables from both the router and the modem.
2. Wait 2-3 minutes to let the electronic circuits completely reset.
3. Plug the power cables back and wait for your router and modem to boot up. This process might take another few minutes.
4. Once all the lights are up, showing that the internet connection is established, try visiting your target website again.

5. Disable conflicting Google Chome extensions

While extensions are great at adding extra functionality to Google Chrome, they can also be the source of browser errors. Low quality and out-of-date extensions are especially likely to cause code conflicts and break the normal operation of Chrome.

In order to figure out whether an extension is the source of the problem, you need to disable all extensions temporarily.

1. Click on the three dots in the top right corner of your Chrome window to open the menu, and under More tools, select Extensions. Alternatively, you can type “chrome://extensions/” into the address bar to open the Extensions screen.
2. Your different extensions will show up on cards, each with a toggle button in the bottom right corner. Toggle off every extension that you can see on the screen.
3. Check your target website to see if you can access it now. If it loads, that means that one of your extensions is the cause of the error.
4. Start enabling extensions one by one, and refresh your target website every time an extension is enabled.
5. When you see the “this site can’t be reached” error again, it means that the last extension you have enabled is the problem.
6. Uninstall that extension and find an alternative to replace its functionality.

6. Disable the “Experimental QUIC protocol” flag

The QUIC protocol is an experimental feature in Google Chrome. It is a general-purpose transport layer network protocol that can reduce latency and improve connection speeds. The QUIC protocol is enabled by default on new installations of Google Chrome.

While Google is excellent at delivering high-quality software code, experimental features can sometimes still cause network problems. Try disabling the QUIC protocol to see if it clears the issue.

1. In a new Google Chrome window, type in “chrome://flags” to open up the Experiments screen.

1. At the top of the screen, you will see a Search flags field.
2. Type “QUIC” into the search field and press Enter.
3. You will see a single search result called Experimental QUIC protocol. Change the default status in the drop-down to Disabled.
4. Restart Google Chrome for your changes to take effect.

7. Reset Google Chrome

If clearing out the data from your Google Chrome or disabling extensions does not work, you can try resetting your Chrome browser. If the error pops up because of browser extension or browser settings issues, resetting the browser will eliminate these issues and stop the error from coming up.

1. Open up your Google Chrome browser and click on the menu icon (3 dots) in the top right-hand corner of the browser. Choose the Settings option.
2. A Settings menu will pop open. In this menu, scroll all the way down to the bottom and choose the advanced tab.
3. Scroll all the way down to the bottom in the advanced menu and find the “reset and clean up” section. Choose to restore your settings to their original defaults and hit Reset settings.
4. Once this is done, try reloading the webpage to see if the issue has cleared up.

8. Restart the DNS client

If the above options do not work, move on to reset the DNS client by restarting it. 

1. Open up your Run module by pressing your Windows key + R on your keyboard or by typing “run” into your computer’s search bar.
2. Type in “services.msc” into the Run module.
3. It will open up a list of services that are available to you. You will want to scan the list for the DNS client and right-click it. Then, hit the Restart option.
4. Reopen your Google Chrome browser and check to see if this fixed the error.

9. Change DNS servers

Sometimes you can fix this error by changing the DNS servers that you are using to access the internet. It is always recommended to use an alternative DNS server address when your internet connection is slow.

1. In your task management tray, find your network icon, right-click it, and choose the “Open Network & Internet Settings” option.
2. In the Advanced network settings section, click on Change adapter options. The Network Connections window will open.
3. Right-click on your active internet connection, and open the Properties window.
4. While on the Networking tab, find the Internet Protocol Version 4 (TCP/IPv4) line in the list, select it, and click the Properties button.
5. In the new window that opens, select the “Use the following DNS server addresses” option and manually set your DNS server to either Google’s DNS or Open DNS. Google’s DNS primary server is 8.8.8.8, and its secondary server is 8.8.4.4. For Open DNS, the primary server is 208.67.222.222, and the secondary is 208.67.220.220.
6. Once you’ve set these, hit OK and see if this fixes the issue.

10. Flush the DNS cache

When a DNS cache is invalid, it can cause the “this site can’t be reached” or the “this webpage is not available” error. To fix this, you would need to flush out the old DNS cache and update it to the correct IP address.

1. You will need to launch the Command Prompt module by typing “cmd” into your computer’s search in the Start Menu, right-clicking on it, and running it as an administrator.
2. Once you have it up, enter the following command and press Enter:
   ipconfig /flushdns
3. A “flushed the DNS resolver cache” message will pop across your screen once the command has been successfully run.
4. Restart your computer to see if the error has been fixed.

11. Reset your TCP/IP address

Going one step further, you can also try resetting your complete TCP/IP configuration.

1. Run and launch the Command Prompt module by typing “cmd” into your computer’s search in the start menu, right-clicking on it, and running it as an administrator.
2. Then type in and execute the following commands: (Hit Enter after each line.)
   • ipconfig /release
   • ipconfig /all
   • ipconfig /flushdns
   • ipconfig /renew
   • netsh int ip reset
   • netsh winsock reset
3. Once these are done, restart your computer.

12. Temporarily disable your firewall and antivirus

Firewalls and antivirus software are notorious for interfering with network connections. Make sure to check the built-in security features as well as any third-party applications you might have on your system for security rules that might block your connection to your target website. It’s also a good idea to check your router for any blacklist rules that might be active. The exact steps you have to take will vary based on the firewall and antivirus software you have. 

As a quick check to see whether the “This site can’t be reached” issue is related to your security settings, try temporarily disabling your firewall and antivirus software.

Here is how to do it for the built-in Windows Defender firewall:

1. Enter “Windows Security” into your Windows search bar and open the app.
2. Select the Firewall & network protection option.
3. Pick the network connection that is labeled as active.

1. Toggle Windows Defender Firewall off to disable it.
2. Check to see if your target website loads now.

Suppose the website you want to reach opens up after disabling your firewall and antivirus. In that case, you will have to dive deeper into your security settings to see which configuration blocks your access.

Disabling security components on your computer should only be a temporary measure. Do not keep those turned off. Find the problematic setting, correct it, then re-enable your firewall and antivirus.

13. Update your network drivers

Outdated network drivers can result in all sorts of issues, including the “This site can’t be reached” error. Luckily, updating network drivers is fairly straightforward on Windows.

1. In your Windows search bar, type in “Device Manager” and open the app.
2. Click on the Network adapters group to show all available network components.
3. Right-click each network adapter, and click on Update driver.
4. Let Windows search automatically for the latest drivers.

Note: Sometimes, Windows fails to find the most up-to-date driver for a hardware component. If you suspect that this might be the case, it’s a good idea to visit the hardware manufacturer’s website and download the latest drivers manually.

14. Reinstall Chrome

If nothing has worked so far, you can try reinstalling Google Chrome as a last effort.

When you are logged into Chrome with a Google account, the browser saves your bookmarks and extensions to the cloud, so you will not lose anything with a reinstall. Once you log in again, the browser will sync back everything, and you can continue from where you left off.

However, if you use Chrome without logging in, make sure to export your bookmarks and stored data before reinstalling.

To reinstall Chrome:

1. Type “Control Panel” into your Windows search bar, and open the app.
2. Click on the Programs and Features option.
3. Find Google Chrome in the list, right-click it, and select Uninstall.
4. Next, open another browser on your computer, navigate to Google’s Chrome download page, and click the Download Chrome button.
5. Run the setup executable and follow the on-screen instructions to reinstall Chrome.

For those who are Mac OS users, you will want to try changing the DNS or try changing the TCP/IP4. To change both of these, you will find the option to do so in your system preferences, network, and advanced settings of your Wi-Fi connection tab.

How to fix the “This site can’t be reached” error on Android

For Android smartphone users, you will want to try clearing your browser data or clearing out app data. To clear your history data, you will follow the same steps as you would on the computer. For clearing out app data, you will want to go to your settings and click on apps, find Google Chrome, and clear both the cache and data. 

Conclusion

We hope that by this point, you have managed to fix the “this site can’t be reached” error with one of the outlined methods. Let us know in the comments section what solution worked for you.

The error “This site can’t be reached” is a common error that you can get in Chrome when you try to visit a website. Instead of the website that you want to visit, you will see one of the following error pages:

• DNS_PROBE_FINISHED_NXDOMAIN
• ERR_CONNECTION_TIMED_OUT

Most of the time the error is related to a problem with your DNS server of DNS cache, something that we can fix easily with the steps below.

These errors don’t only occur on Windows 10, but you can also get them on Android devices.

If you are using Microsoft Edge then you will get the error message “Can’t reach this page” which is similar to the error “This site can’t be reached” in Chrome.

Your computer keeps a local copy (cache) of all the DNS records. It uses this so it can resolve the DNS names more quickly. But sometimes the records in the DNS cache are outdated which can result in the error “This site can’t be reached”.

We can clear the DNS cache with a simple command. This won’t do any damage or harm to your computer. Your computer will only need to rebuild the local DNS cache which you won’t even notice.

Method 2 – Change your DNS Server to fix This site can’t be reached

DNS servers are used to translate the domain names to the actual IP Address of the server on which the website is hosted. It’s possible that there is a problem with the DNS server that results in the error “This site can’t be reached”.

DNS servers can also be used for content filtering, which can prevent access to a particular website. You can change the DNS server that you want to use locally on your computer.

1. Press Windows key + X (or right-click on start) and choose Network Connections
2. Click on Change adapter options
3. Double click on your (wireless) network adapter
4. Select Properties
5. Doube click on Internet Protocol version 4 (TCP/IPv4)
6. Select Use the following DNS server address and enter 8.8.8.8 and 8.8.4.4.

Try to visit the website and see if the “this site can’t be reached” error is resolved

Method 3 – Verify that the website is online

Before we continue with the possible methods to solve the error we first need to make sure that you are the only one that can’t reach the website. Because the problem doesn’t have to be on your end, maybe the server of the website is down.

Make sure that you have double-checked the URL (website name) that you have typed in. Most of the time the error is caused by a simple typo in the URL of the website.

We can use an online tool to verify if the website is down for everyone or just you.

1. Open the website downforeveryoneorjustme.com
2. Type in the URL that you try to visit
3. Click on or just me

You will either see a message “It’s not just you! nonexsistingwebsite.com is down.” or the message “It’s just you. lazyadmin.nl is up”.

If it’s just you, then continue reading. Otherwise, try to visit the website at a later moment.

Method 4 – Clear your Browser Cache

Your browser caches files from websites that you visit and stores cookies that contain specific website settings or information. Sometimes these files can cause the “this site can’t be reached” error in Chrome.

We are going to clear the cache of your browser. You don’t have to remove everything, you can safely keep your stored password and browser history.

1. In Chrome click on the 3 dots beside the URL bar

1. Choose Settings
2. Select Privacy and Security on the left side (or scroll down)
3. Click on Clear browsing data
4. Select the following options:
   1. Time Range > All time
   2. Uncheck Browsing History
   3. Check Cookies and other site data
   4. Check Cached images and files
5. Click on Clear Data

Restart Chrome and test if you can visit the website again.

Method 5 – Disable extensions in Google Chrome

Extension in Google Chrome can be really useful, but sometimes that can also interfere with loading a particular website. We are going to disable the extensions briefly, to make sure that the extensions in Chrome are not the cause of the “this site can’t be reached” error. You can turn them back on after testing.

1. Click on the 3 dots in Chrome
2. Select More Tools
3. Choose Extensions

1. Disable all extensions that are turned on. You can leave the Chrome Apps turned on.

Reload the webpage that you are trying to visit and see if the error is resolved. If the problem is solved, turn the extensions back on one at a time to find out which one caused the problem.

If it didn’t help, then you can turn them all back on.

Method 6 – Run Windows Network Diagnostics to Fix This site Can’t be Reached

A lot of common problems in Windows can be fixed with one of the diagnostics tools. These tools scan your settings and do some tests in the background to find and fix any problems.

1. Right-click on Start or press Windows Key + X
2. Choose Network Connections
3. Click on Network troubleshooter (you might need to scroll down a bit)

1. When it’s finished it will highlight any problems that it has found, for example a DNS issue:

Primary DNS Server errors can be fixed with method 2. Restart your computer when the tools are finished and check if the error this can’t be reached is resolved.

Method 7 – Disable (Experimental) QUIC Protocol in Chrome

The QUIC Protocol in Chrome is an experimental network transport layer protocol from Google. It’s designed to load websites faster and more efficient. But sometimes this new protocol can cause connection problems.

1. Open Chrome
2. In the addressbar type: chrome://flags
3. Search on quic in the searchbar
4. Change the settings from Default to Disabled

After you have disabled the settings, restart Chrome and check if the error “This can’t be reached” is resolved.

Method 8 – Scan you computer for Malware

Malware can interfere with your network connections. If all the steps above didn’t work then it might be a good idea to scan your computer for malware.

You can use the Free 30-day trial of HitmanPro to scan your computer on malware. Make sure that all the malware is removed.

What causes the error “This site cannot be reached”

When you get the error message this site cannot be reached in Google Chrome then your browser is unable to connect to the server where the website is running. If it is only one or two sites that you can’t reach, then the steps in this article should help you to resolve the issue. But when you are unable to visit any website, then you should read this article for the solution.

So when you type in an URL (the name) of a website in your browser and hit enter, then your computer will need to look up the correct IP Address of the server running the website. It will use the DNS records for this.

Your computer keeps a local cache (copy) of the DNS address that you use often. New addresses are requested from your DNS provider (often your ISP). Your local cache may have an outdated address which causes the “this site cannot be reached” error.

What you shouldn’t do to Fix this site can t be reached

Some websites are suggesting methods to solve the error “This site can’t be reached” that are really unnecessary. If you can’t reach only one particular website, then there is really no need to do one of the following:

• Resetting your modem
• Re-installing network drivers
• Resetting your wireless network
• Reinstall Chrome

Other possible causes

Did non of the above solved your issue and are you still the only one that is unable to access the website?

Some websites like forums can block users based on their IP Addresses. This will prevent you from accessing their website at all. The only way to test this is to access the website from another location (your work, or from a mobile hotspot).

Company devices may have content policies in place that prevent you from accessing websites in certain categories. You can contact your IT department to verify if access to the website is blocked.

Wrapping Up

I hope you were able to fix this site can’t be reached error in Chrome. If you have any questions, just drop a comment below.