Udisk error quark 0 что делать

Linux Mint Forums

Welcome to the Linux Mint forums!

Getting «(udisks-error-quark, 0)» when trying to install WDE Luks (SOLVED)

Getting «(udisks-error-quark, 0)» when trying to install WDE Luks (SOLVED)

Post by digger44 » Wed May 29, 2019 11:52 pm

Re: Getting «(udisks-error-quark, 0)» when trying to install WDE Luks

Post by WharfRat » Thu May 30, 2019 12:26 am

Re: Getting «(udisks-error-quark, 0)» when trying to install WDE Luks

Post by digger44 » Fri May 31, 2019 9:42 am

Thank you for your quick reply Wharfrat. Unfortunately sudo wipefs /dev/sdb didn’t return anything. Do you have any other suggestions?
After I wrote the above I went into GParted and was able to create a partition in Fat32. It gives me this result:
Partition: dev/sb1 with box with !
File System: a green box then Fat32
Size: 3.64Tb
Used: 931.50 MiB
Unused: 1.64Tb
Flags: msftdata

Disks still sees it as Device: /dev/mint-vg/swap_1, Contents: Swap(version 1)—Active

I’m not sure if what I did screws it up more, but that’s the current status.

Re: Getting «(udisks-error-quark, 0)» when trying to install WDE Luks

Post by WharfRat » Fri May 31, 2019 11:14 am

The fat32 file system has a 2TB limit so I have no idea how you show 3.64Tb

Can you paste a gparted screenshot

Also include sudo blkid

Re: Getting «(udisks-error-quark, 0)» when trying to install WDE Luks

Post by digger44 » Sun Jun 02, 2019 10:36 pm

Re: Getting «(udisks-error-quark, 0)» when trying to install WDE Luks

Post by WharfRat » Sun Jun 02, 2019 11:49 pm

Источник

Я не могу отформатировать мой живой USB-накопитель (udisks-error-quark, 11)

Я не могу отформатировать мой pendrive (где Ubuntu был загружен как live-usb) . Всякий раз, когда я делаю, они говорят.

Этот раздел нельзя изменить, поскольку он содержит таблицу разделов; пожалуйста, заново инициализируйте макет всего устройства. (udisks-error-quark, 11)

Что делать? Я использую Диски в Ubuntu 16.04

5 ответов

Если у вас нет ценных данных на этом диске, вы можете создать новую таблицу разделов с помощью дисков Gnome, если она не нравится текущей:

Нажмите на зубчатое колесо для управления приводом и выберите «Форматировать…».

Выберите подходящий тип таблицы разделов и снова нажмите «Форматировать…». Для флеш-накопителя USB вы, вероятно, захотите «MBR/DOS» в качестве типа раздела, как на скриншоте.

Подтвердите, что вы хотите перезаписать таблицу разделов и потерять все данные на диске.

Затем создайте новый раздел и отформатируйте его.

Нажмите на кнопку со знаком below под разметкой раздела.

• подходящие границы раздела (вы, вероятно, хотите охватить все доступное пространство, которое используется по умолчанию),
• файловая система (для USB-накопителя, вероятно, FAT, exFAT или NTFS), и

Нажмите «Создать», подождите, пока создание файловой системы завершится (может быть в диапазоне минут для большого, но медленного диска), и все готово!

Лучший способ сделать это.

Это перечислит все ваши подключенные / отключенные устройства.

Найдите свое USB-устройство. вы можете проверить его с помощью утилиты Disk. В нем может быть что-то вроде

/dev/sdb1 или / dev / sdc1.

sudo fdisk / dev / sdb — если ваш USB это sdb

Команда (m для справки): d Номер раздела (1,2, по умолчанию 2):

Раздел 2 был удален.

Команда (m для справки): d Выбранный раздел 1 Раздел 1 удален.

Команда (m для справки): w Таблица разделов была изменена. Вызов ioctl() для перечитывания таблицы разделов. Синхронизация дисков.

Теперь вернитесь к Дисковой утилите, а затем отформатируйте диск, как хотите.

Источник

Thread: 1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please help

Thread Tools

Display

1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please help

and in the GParted when i open it it gives the same error as below, but after ignoring like 10 times it shows the HD, i try new and it says i need partition table, i try to create it and it gives that error again in the image. after some ignores the error change to: input/output error during read on /dev/sda (and write too).

View post on imgur.com

So, probably my MBR is ****ed up right? i tried the boot-repair but when i open it says to backup the date before this operation, i click ok but there is no recommended or advanced options, only the about, quit and create a bootinfo, and thats what i did.

i tried a lot of things already and i dont know what to do more. i dont even care anymore about the data, i just want the hd to work with ubuntu, i just want to format it somehow and install ubuntu, its really urgent that i can start work again with the laptop and im getting crazy, and i cant afford to spend money on a new HD.
Thank you for your time, hope you guys can give me some idea to resolve this problem, it would be the best Christmas present xD
Merry Christmas!

Re: 1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please he

In Disks and upper right corner is Smart Status.
While it can run lots of tests, all I know is whether it says drive is good or bad.

Boot-Repair says UEFI Secure Boot is now on?
Did you do a Windows update (or did it do one in background) and change UEFI settings?
Windows does that with major updates and you may not notice as it just takes a bit longer to shutdown and reboot.

Report is not showing drive at all. But most common issue after abnormal shutdown is file corruption. But now that you have done various other changes, not sure if chkdsk on NTFS and fsck on ext4 partitions will solve anything.

Post this from live installer.
sudo parted -l
sudo fdisk -lu
If gpt, run this also:
sudo gdisk -l /dev/sda
And if gpt, you have backup partition table that may help resolve issues, unless you repartitioned as part of your changes already done.

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

[SOLVED] Error mounting filesystem via either Disks or fstab

[SOLVED] Error mounting filesystem via either Disks or fstab

Post by jiawen » Fri Mar 22, 2013 1:43 am

Re: Error mounting filesystem via either Disks or fstab

Post by altair4 » Fri Mar 22, 2013 6:30 am

Step 1: Don’t use the Disks utility.

Step 2: Fix your /etc/fstab

Note: You might want to run the following command to make sure it really has that UUID number and that it is in fact formatted to ext3:

** If the partition is currently mounted unmount it.

** Then run the following command to test for syntax errors and if there are none mount the partition:

Re: Error mounting filesystem via either Disks or fstab

Post by jiawen » Mon Mar 25, 2013 7:30 pm

Re: Error mounting filesystem via either Disks or fstab

Post by johnywhy » Wed Jun 03, 2015 11:15 pm

Re: [SOLVED] Error mounting filesystem via either Disks or f

Post by CinnamonRoll » Wed Feb 03, 2016 4:16 pm

Re: [SOLVED] Error mounting filesystem via either Disks or f

Post by altair4 » Wed Feb 03, 2016 4:39 pm

x-gvfs-show will do something never intended. It will create a link on the side panel of your file manager and on the desktop if you allow that sort of thing for partitions that are not mounted under /media or $HOME.

Back in the olden days you mounted something under /mnt when you didn’t want it to show up on the side panel or on the desktop. Makes no sense to put it under /mnt then add x-gvfs-show. And if you wanted to change how it displayed you changed it’s LABEL.

It’s made worse in Disks because it asks you if you want it to:

The new user will look at that and say . well of course I do. That’s why I’m mounting it. What kind of a daft question is that? Selecting that option inserts x-gvfs-show.

I’m going to be uncharacteristically generous here and suggest that «Disks» isn’t buggy it’s that Mint isn’t ready for it yet. Disks was written and designed to fit within the whole systemd / brave-new-world udev/udisks universe. When Mint goes to version 18 all the backend pieces will be in place to have this goofy option work.

BTW, This thread is 3 years old. The OP may have gone to the dark side and is a happy MacBook user today.

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

[SOLVED] Error mounting filesystem via either Disks or fstab

[SOLVED] Error mounting filesystem via either Disks or fstab

Post by jiawen » Fri Mar 22, 2013 1:43 am

Re: Error mounting filesystem via either Disks or fstab

Post by altair4 » Fri Mar 22, 2013 6:30 am

Step 1: Don’t use the Disks utility.

Step 2: Fix your /etc/fstab

Note: You might want to run the following command to make sure it really has that UUID number and that it is in fact formatted to ext3:

** If the partition is currently mounted unmount it.

** Then run the following command to test for syntax errors and if there are none mount the partition:

Re: Error mounting filesystem via either Disks or fstab

Post by jiawen » Mon Mar 25, 2013 7:30 pm

Re: Error mounting filesystem via either Disks or fstab

Post by johnywhy » Wed Jun 03, 2015 11:15 pm

Re: [SOLVED] Error mounting filesystem via either Disks or f

Post by CinnamonRoll » Wed Feb 03, 2016 4:16 pm

Re: [SOLVED] Error mounting filesystem via either Disks or f

Post by altair4 » Wed Feb 03, 2016 4:39 pm

x-gvfs-show will do something never intended. It will create a link on the side panel of your file manager and on the desktop if you allow that sort of thing for partitions that are not mounted under /media or $HOME.

Back in the olden days you mounted something under /mnt when you didn’t want it to show up on the side panel or on the desktop. Makes no sense to put it under /mnt then add x-gvfs-show. And if you wanted to change how it displayed you changed it’s LABEL.

It’s made worse in Disks because it asks you if you want it to:

The new user will look at that and say . well of course I do. That’s why I’m mounting it. What kind of a daft question is that? Selecting that option inserts x-gvfs-show.

I’m going to be uncharacteristically generous here and suggest that «Disks» isn’t buggy it’s that Mint isn’t ready for it yet. Disks was written and designed to fit within the whole systemd / brave-new-world udev/udisks universe. When Mint goes to version 18 all the backend pieces will be in place to have this goofy option work.

BTW, This thread is 3 years old. The OP may have gone to the dark side and is a happy MacBook user today.

Источник

1. 1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please help
   

   Hello Ubuntu community, i’m having a really hard time trying to resolve this issue, since yesterday that i’m around my laptop trying to fix this HDD problem!
   I have an asus vivobook a542ur with 1TB HDD, it was working all fine, i did a partition on windows, installed ubuntu with a pen and so i have a dualboot, yesterday i was in ubuntu and the laptop froze for like 15/20 secs, after that it shutdown and now i cant enter in windows or ubuntu.
   i have tried a lot of things, right now im using the ubuntu live session from a USB.
   sometimes it was detecting the hdd in the bios, and sometimes it didnt show, so i opened the laptop, removed the HDD and inserted it again, well it didnt hurt trying…but nothing happened.
   in ubuntu Disks it shows my 1TB HD but with partition unknown…

   https://imgur.com/a/VygG6m7

   If i try to format it gives me the error: Error formating volume — Error wiping device: failed to probe the device ‘/dev/sda3’ (udisks-error-quark, 0)

   and in the GParted when i open it it gives the same error as below, but after ignoring like 10 times it shows the HD, i try new and it says i need partition table, i try to create it and it gives that error again in the image. after some ignores the error change to: input/output error during read on /dev/sda (and write too).

   https://imgur.com/a/yq2PuCi

   So, probably my MBR is ****ed up right? i tried the boot-repair but when i open it says to backup the date before this operation, i click ok but there is no recommended or advanced options, only the about, quit and create a bootinfo, and thats what i did.

   http://paste.ubuntu.com/p/VSWyjjPbq2/
   i tried a lot of things already and i dont know what to do more. i dont even care anymore about the data, i just want the hd to work with ubuntu, i just want to format it somehow and install ubuntu, its really urgent that i can start work again with the laptop and im getting crazy, and i cant afford to spend money on a new HD.
   Thank you for your time, hope you guys can give me some idea to resolve this problem, it would be the best Christmas present xD
   Merry Christmas!

   ---

2. Re: 1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please he
   

   In Disks and upper right corner is Smart Status.
   While it can run lots of tests, all I know is whether it says drive is good or bad.

   Boot-Repair says UEFI Secure Boot is now on?
   Did you do a Windows update (or did it do one in background) and change UEFI settings?
   Windows does that with major updates and you may not notice as it just takes a bit longer to shutdown and reboot.

   Report is not showing drive at all. But most common issue after abnormal shutdown is file corruption. But now that you have done various other changes, not sure if chkdsk on NTFS and fsck on ext4 partitions will solve anything.

   Post this from live installer.
   sudo parted -l
   sudo fdisk -lu
   If gpt, run this also:
   sudo gdisk -l /dev/sda
   And if gpt, you have backup partition table that may help resolve issues, unless you repartitioned as part of your changes already done.

   ---

3. Re: 1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please he
   

   Originally Posted by oldfred
   

   In Disks and upper right corner is Smart Status.
   While it can run lots of tests, all I know is whether it says drive is good or bad.

   Boot-Repair says UEFI Secure Boot is now on?
   Did you do a Windows update (or did it do one in background) and change UEFI settings?
   Windows does that with major updates and you may not notice as it just takes a bit longer to shutdown and reboot.

   Report is not showing drive at all. But most common issue after abnormal shutdown is file corruption. But now that you have done various other changes, not sure if chkdsk on NTFS and fsck on ext4 partitions will solve anything.

   Post this from live installer.
   sudo parted -l
   sudo fdisk -lu
   If gpt, run this also:
   sudo gdisk -l /dev/sda
   And if gpt, you have backup partition table that may help resolve issues, unless you repartitioned as part of your changes already done.

   In the Disks, now it says No Media in the Volumes (inside the Hard Disk)

   No, Boot-Repair doesn’t say anything about UEFI.
   i tried fsck from the terminal but no success

   okay, the result from the commands:

   sudo parted -l :

   Code:

   Warning: The driver descriptor says the physical block size is 2048 bytes, but
   Linux says it is 512 bytes.
   Ignore/Cancel? i                                                          
   Model: Kingston DataTraveler 3.0 (scsi)
   Disk /dev/sdb: 31.0GB
   Sector size (logical/physical): 2048B/512B
   Partition Table: mac
   Disk Flags: 
   
   Number  Start   End     Size    File system  Name   Flags
    1      2048B   6143B   4096B                Apple
    2      1913MB  1916MB  2392kB               EFI
   
   sudo fdisk -lu :
   
   Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   
   
   Disk /dev/sdb: 7.2 GiB, 7751073792 bytes, 15138816 sectors
   Units: sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   Disklabel type: dos
   Disk identifier: 0x663eb4c4
   
   Device     Boot   Start     End Sectors  Size Id Type
   /dev/sdb1  *          0 3815135 3815136  1.8G  0 Empty
   /dev/sdb2       3737268 3741939    4672  2.3M ef EFI (FAT-12

   sudo gdisk -l /dev/sda :

   Code:

   GPT fdisk (gdisk) version 1.0.3
   
   Problem reading disk in BasicMBRData::ReadMBRData()!
   Warning! Read error 22; strange behavior now likely!
   Warning! Read error 22; strange behavior now likely!
   Partition table scan:
     MBR: MBR only
     BSD: not present
     APM: not present
     GPT: not present
   
   
   ***************************************************************
   Found invalid GPT and valid MBR; converting MBR to GPT format
   in memory. 
   ***************************************************************
   
   Disk /dev/sda: 0 sectors, 0 bytes
   Model: ST1000LM035-1RK1
   Sector size (logical/physical): 512/4096 bytes
   Disk identifier (GUID): 3D2D449F-0802-4423-94E8-27EF6EC4957D
   Partition table holds up to 128 entries
   Main partition table begins at sector 2 and ends at sector 33
   First usable sector is 34, last usable sector is 18446744073709551582
   Partitions will be aligned on 2048-sector boundaries
   Total free space is 0 sectors (0 bytes)
   
   Number  Start (sector)    End (sector)  Size       Code  Name

   Ok, now it seems that isn’t even detecting the HD, in GParted only shows my pendrive now… its weird, i restarted it before doing this, pressed escape and i could choose windows, ubuntu or the USB… and as you could see from the image it detected the disk before. it seems sometimes it detects and sometimes it doesn’t?? but its weird since in the boot menu i could choose windows and ubuntu….

   EDIT: now it doesnt show either in the boot-repair report:
   http://paste.ubuntu.com/p/4PzJwwQPC5/

   but it have this info there:

   Code:

   ========= Devices which don't seem to have a corresponding hard drive: =========
   
   sda 
   
   =============================== StdErr Messages: ===============================
   
   File descriptor 9 (/proc/12917/mountinfo) leaked on lvs invocation. Parent PID 17990: bash
   File descriptor 63 (pipe:[98349]) leaked on lvs invocation. Parent PID 17990: bash
   
   ADDITIONAL INFORMATION :
   =================== log of boot-repair 20181225_1744 ===================
   boot-repair version : 4ppa65
   boot-sav version : 4ppa65
   boot-sav-extra version : 4ppa65
   glade2script version : 3.2.3~ppa4
   grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
   Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
   boot-repair is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
   CPU op-mode(s):      32-bit, 64-bit
   BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
   ls: cannot access '/home/usr/.config': No such file or directory

   Last edited by deadflowr; December 25th, 2018 at 07:41 PM.

   Reason: added code tags

   ---

4. Re: 1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please he
   

   It knows flash drive is sdb, but shows no sda.

   It says Secure boot is on in line 206.
   The boot entries before line 206 are from UEFI, not from drive. And now that you cannot see sda, those entries will not work.

   In UEFI/BIOS is drive shown (not boot entries) under something like storage devices, drives or similar? If not double check connections.

   ---

5. Re: 1.0TB Hard Disk Error! udisks-error-quark,0 | i/o error — Can’t format! please he
   

   Originally Posted by oldfred
   

   It knows flash drive is sdb, but shows no sda.

   It says Secure boot is on in line 206.
   The boot entries before line 206 are from UEFI, not from drive. And now that you cannot see sda, those entries will not work.

   In UEFI/BIOS is drive shown (not boot entries) under something like storage devices, drives or similar? If not double check connections.

   yep in the bios it showed my 1tb hd…

   well… i guess my hd is dead. a friend of mine borrowed me his ssd and i could install ubuntu in it, so my HD bad. i dont think i can recover it i tried so many many things since yesterday and none worked, error after error.

   thank you very much for your time man! you are an angel!!

   Last edited by wildmanne39; December 26th, 2018 at 01:58 AM.

   Reason: Removed very inappropriate language

   ---

Страницы: [1]   Вниз

0 Пользователей и 1 Гость просматривают эту тему.

Страницы: [1]   Вверх