Ui data error cannot execute регистратор

Тема: Видео регистратор Subini STR XT-5

Опции темы

Поиск по теме

Отображение

Видео регистратор Subini STR XT-5

Доброе время суток всем.Купил себе на днях по почте видео регистратор SUBINI STR XT-5.Работает хорошо,срабатывает на все радар-сигналы.Карта памяти на 32 Гб,класс 10. Ну всё вроде хорошо. Теперь вопрос: Каким образом скачать с карты памяти видео регистратора файлы?Подключил к компу. не видит.Попытался с инета скачать ПО SUBINI STR XT-5 но ни где не нашёл драйверов.Попытался открыть файлы через USB Card Reader — не видит комп файлов.И в комплекте с радар-детектором установочный диск не идёт.ЧЕРЕЗ КАКУЮ ПРОГРАММУ ОТКРЫТЬ МОЖНО ВИДЕО ЗАПИСИ с этого детектора?

Что пишет компьютер в св-вах когда подключаете отдельно?

На самом устройстве можно просмотреть отснятое?

Партнерские программы для форумчан

что пишет компьютер в св-вах когда подключаете отдельно?

на самом устройстве можно просмотреть отснятое?

на дисплее при включении к компу выводится надпись ; соединение usb успешным.
однако на компе данное устройство не отображается как «съёмный» носитель. естественно и файлов там нет.
свои собственные видео файлы на приборе субини просматриваются без проблем,только без звука.
плеер я скачал из инета на сайте производителя приборов субини.ру. на этот плеер нужны файлы с видео регистратора.
пробовал снять карту памяти с прибора и подключить её через Кардридер к компу.всё равно не определяется.
аналогично подключал через av кабель радар детектор к плазменному тв к usb порту.аналогично файлы не видно.
на экране прибора высвечивается ver.v533-1241 на сайте производителя субине есть версия v510-1240.

Последний раз редактировалось МИС53; 10.12.2014 в 17:05 .

МИС53, интересный случай. Возьму на тест попробую. Посмотрим что получиться. О результатах отпишусь.
Когда через картридер подключаете карту памяти, что показывают св-ва?
Не пробывали открывать отснятое видео через саму программу при установленной только картой?

Партнерские программы для форумчан

Источник

This section helps you troubleshoot common widget errors on the Appsmith platform.

Binding errors​

You may see below errors when binding data to widgets from an API, Query, JS object.

Sync field error​

You may see this error when executing an API, Query, JS Object in a widget property that expects data, and can’t be used to trigger an action.

Error message​

Cause​

Action refers to the execution of an API, Query, or JS object. You can only perform an action by binding it to an async field. When you bind an action to a sync field that only expects data, it throws an error.

Example: if you are executing a storeValue() function in a TableData property of a table. The TableData property expects data and can’t execute a function, and results in an error. Similarly, if you try to execute a JS Object function in the TableData property, it throws an error.

Solution​

Invoke the data property of an API, Query or JS object.

For example, you have a JS Object getLoggedInUserInfo , which has a function getFullNameOfLoggedInUser . The function returns the full name of the logged-in user. You wish to add the full name and create a welcome text, Welcome! . Bind the response of getFullNameOfLoggedInUser function to a text widget by calling the .data property. To bind the response, add the below code snippet in a mustache ( <<>> ) sign.

JSON form errors​

You may see the below errors when working with a JSON Form widget.

Source data exceeds 50 fields​

You may see an error message when you try to bind a large query/API response to the source data property of the JSON Form widget.

Error message​

Cause​

The problem can be caused when you are trying to bind:

• A large array of multiple JSON objects
• A huge JSON object which has a lot of fields
• The whole query data rather than a selected row or triggered row in a table

Solution​

To determine if the problem is caused due to:

• A large array or a huge JSON object — You can re-look at the data and evaluate the need to display all the data on UI, as it would be painful for your users to navigate more than 50 fields.
• The whole query response that you bound to the source data — You recheck the source data field you are trying to bind and select either the selected row / triggered row to bind.

Once you have figured out the new structure for the data, head to the source data field to make changes.

Источник

This section helps you troubleshoot common widget errors on the Appsmith platform.

Binding errors​

You may see below errors when binding data to widgets from an API, Query, JS object.

Sync field error​

You may see this error when executing an API, Query, JS Object in a widget property that expects data, and can’t be used to trigger an action.

Error message​

Cause​

Action refers to the execution of an API, Query, or JS object. You can only perform an action by binding it to an async field. When you bind an action to a sync field that only expects data, it throws an error.

Example: if you are executing a storeValue() function in a TableData property of a table. The TableData property expects data and can’t execute a function, and results in an error. Similarly, if you try to execute a JS Object function in the TableData property, it throws an error.

Solution​

Invoke the data property of an API, Query or JS object.

For example, you have a JS Object getLoggedInUserInfo , which has a function getFullNameOfLoggedInUser . The function returns the full name of the logged-in user. You wish to add the full name and create a welcome text, Welcome! . Bind the response of getFullNameOfLoggedInUser function to a text widget by calling the .data property. To bind the response, add the below code snippet in a mustache ( <<>> ) sign.

JSON form errors​

You may see the below errors when working with a JSON Form widget.

Source data exceeds 50 fields​

You may see an error message when you try to bind a large query/API response to the source data property of the JSON Form widget.

Error message​

Cause​

The problem can be caused when you are trying to bind:

• A large array of multiple JSON objects
• A huge JSON object which has a lot of fields
• The whole query data rather than a selected row or triggered row in a table

Solution​

To determine if the problem is caused due to:

• A large array or a huge JSON object — You can re-look at the data and evaluate the need to display all the data on UI, as it would be painful for your users to navigate more than 50 fields.
• The whole query response that you bound to the source data — You recheck the source data field you are trying to bind and select either the selected row / triggered row to bind.

Once you have figured out the new structure for the data, head to the source data field to make changes.

Источник

Cannot Execute Binary File 7 Easy Ways to Fix it

Stuck with an annoying error of “Cannot execute binary file“? Then don’t worry. We will provide you with all the working ways which will help you in fixing the problem.

We will also discuss why did the error occurred and similar queries related to it.

What is a Binary file

Binary means two. The two characters: 1, 0 are repeatedly used to store information and data. The text formats which use this binary format are known are binary format. A format can be changed to decimal, ASCII, BCD, or hexadecimal. We type in the ASCII format, but the computer interprets it in binary format.

A file that is written in binary format is known as a Binary file. The extension is “.bin“. These files can be executed in Linux by the syntax: “./file.bin“

How to resolve cannot execute binary file

Try using one of the following methods and check if the nuisance of binary file unable to execute is rectified or not:

Install GCC and Gfortran library

For Linux Operating Systems, type the below code in the PowerShell:

For installing g++, GCC, and a few more libraries, use the following code:

Check if the error is fixed.

Unmatched Architecture

Open the settings of your computer and check if your system is 32 bit or 64 bit.

Now execute this code to check the architecture format of the specific binary file:

Try downloading the 32 bt binary file from the internet, if available.

Download WienHQ for Ubuntu / MacOS

If you are trying to execute a binary file made through and for Windows Operating Systems , it may not work directly in your Unix systems. You will have to download a package that can transform an unmodified Windows binary to Unix usable ones.

Use the below link to download the WineHQ

Provide the permission

One more reason for cannot execute a binary file is that the permission is not granted. To fix this, type the below in the PowerShell:

Using the sh command

Try the below syntax:

Using dos2unix command

In Powershell, use the command:

Check if it works out or not.

Uncompress the file

Check if the below line aids in executing the file:

If your file is in a zipped format, try unzipping the compressed format and executing it as usual.

Remember to place the path address along with the name of the file.

What is cannot execute binary file

If you download a binary file from the internet and try to execute it in PowerShell, sometimes you may encounter an error known as “Cannot execute binary file.

The Linux Operating System failed to execute (run or open) the specified file you mentioned in the previous line due to technical issues. A few reasons as to why this error has occurred are provided below.

Causes for cannot execute binary file

There can be broadly two reasons for a binary file to show “Cannot execute binary file” error:

1. The file is an exe file and is compile only for Windows.
2. The bit architecture of your system and the bin file does not match.

Fix: Cygwin cannot execute binary file

You can use Shell commands in Windows after downloading and installing the Cygwin application.

If you have executed:
C:cygwinbinfilename.exe -h always /bin/bash -l ls

Try this syntax:
C:cygwinbinfilename.exe -h always /bin/bash -l -c ls

If still, it didn’t work, try uninstalling and reinstalling all the necessary files of Cygwin again.

Java- Cannot execute binary file

If the Shell or Cmd Prompt window displays an “Exec format error” error, it wants to say that the current version is not compatible with your system.

If you are using AMD/ Intel processes, install the Linux/x64 build from here.

If you are using ARM type of processors: install the Linux-aarch64 build from here.

Источник

Backup and restore

Backup throws «error/cannot_finish_ui_if_not_setting_ui»

Backup throws «error/cannot_finish_ui_if_not_setting_ui»

I upgraded my moodle from 1.9 to 2.0. Ever since on trying to take backup of the course i get this error

I am keeping all options as they appear by default on course backup.Could anybody help me with this? I had taken backups successfuly for same cours before upgrading.

Re: Backup throws «error/cannot_finish_ui_if_not_setting_ui»

Did you ever figure this out — I am having the same problem but only on certain courses.

Re: Backup throws «error/cannot_finish_ui_if_not_setting_ui»

I’ve just come across this discussion having searched for «cannot_finish_ui_if_not_setting_ui» after reading about it elsewhere (Import from course problem (2.0, 2.0.1)).

If you’re still having problems, please try enabling developer debugging on your site (see the documentation Debugging) then create an issue for it in the tracker.

Re: Backup throws «error/cannot_finish_ui_if_not_setting_ui»

after debugging we resolved on our Sytem the Problem. The Modul «Standardslideshow» was installed but not used. After deleting the Modul everything works.

Re: Backup throws «error/cannot_finish_ui_if_not_setting_ui»

that helps. At least is one cource. However the import ends with two different results:

— within the same category — it seems that it works correctly (Debug ALL returns only one error below)

— form other category — it just says import finished successfully however nothing was imported. Debug ALL return lots errors of below

Error: mdb->get_record() found more than one record!

• line 1268 of /lib/dml/moodle_database.php: call to debugging()
• line 1228 of /lib/dml/moodle_database.php: call to moodle_database->get_record_sql()
• line 1208 of /lib/dml/moodle_database.php: call to moodle_database->get_record_select()
• line 394 of /backup/util/dbops/restore_dbops.class.php: call to moodle_database->get_record()
• line 302 of /backup/util/dbops/restore_dbops.class.php: call to restore_dbops::prechek_precheck_qbanks_by_level()
• line 135 of /backup/util/helper/restore_prechecks_helper.class.php: call to restore_dbops::precheck_categories_and_questions()
• line 322 of /backup/controller/restore_controller.class.php: call to restore_prechecks_helper::execute_prechecks()
• line 114 of /backup/import.php: call to restore_controller->execute_precheck()

Any idea what does it mean?

But it already saves lots of work even within one category — thank you very very much.

Источник

Тема: Видео регистратор Subini STR XT-5

Опции темы

Поиск по теме

Отображение

Видео регистратор Subini STR XT-5

Доброе время суток всем.Купил себе на днях по почте видео регистратор SUBINI STR XT-5.Работает хорошо,срабатывает на все радар-сигналы.Карта памяти на 32 Гб,класс 10. Ну всё вроде хорошо. Теперь вопрос: Каким образом скачать с карты памяти видео регистратора файлы?Подключил к компу. не видит.Попытался с инета скачать ПО SUBINI STR XT-5 но ни где не нашёл драйверов.Попытался открыть файлы через USB Card Reader — не видит комп файлов.И в комплекте с радар-детектором установочный диск не идёт.ЧЕРЕЗ КАКУЮ ПРОГРАММУ ОТКРЫТЬ МОЖНО ВИДЕО ЗАПИСИ с этого детектора?

Что пишет компьютер в св-вах когда подключаете отдельно?

На самом устройстве можно просмотреть отснятое?

Партнерские программы для форумчан

что пишет компьютер в св-вах когда подключаете отдельно?

на самом устройстве можно просмотреть отснятое?

на дисплее при включении к компу выводится надпись ; соединение usb успешным.
однако на компе данное устройство не отображается как «съёмный» носитель. естественно и файлов там нет.
свои собственные видео файлы на приборе субини просматриваются без проблем,только без звука.
плеер я скачал из инета на сайте производителя приборов субини.ру. на этот плеер нужны файлы с видео регистратора.
пробовал снять карту памяти с прибора и подключить её через Кардридер к компу.всё равно не определяется.
аналогично подключал через av кабель радар детектор к плазменному тв к usb порту.аналогично файлы не видно.
на экране прибора высвечивается ver.v533-1241 на сайте производителя субине есть версия v510-1240.

Последний раз редактировалось МИС53; 10.12.2014 в 17:05 .

МИС53, интересный случай. Возьму на тест попробую. Посмотрим что получиться. О результатах отпишусь.
Когда через картридер подключаете карту памяти, что показывают св-ва?
Не пробывали открывать отснятое видео через саму программу при установленной только картой?

Партнерские программы для форумчан

Источник

Cannot Execute Binary File 7 Easy Ways to Fix it

Stuck with an annoying error of “Cannot execute binary file“? Then don’t worry. We will provide you with all the working ways which will help you in fixing the problem.

We will also discuss why did the error occurred and similar queries related to it.

What is a Binary file

Binary means two. The two characters: 1, 0 are repeatedly used to store information and data. The text formats which use this binary format are known are binary format. A format can be changed to decimal, ASCII, BCD, or hexadecimal. We type in the ASCII format, but the computer interprets it in binary format.

A file that is written in binary format is known as a Binary file. The extension is “.bin“. These files can be executed in Linux by the syntax: “./file.bin“

How to resolve cannot execute binary file

Try using one of the following methods and check if the nuisance of binary file unable to execute is rectified or not:

Install GCC and Gfortran library

For Linux Operating Systems, type the below code in the PowerShell:

For installing g++, GCC, and a few more libraries, use the following code:

Check if the error is fixed.

Unmatched Architecture

Open the settings of your computer and check if your system is 32 bit or 64 bit.

Now execute this code to check the architecture format of the specific binary file:

Try downloading the 32 bt binary file from the internet, if available.

Download WienHQ for Ubuntu / MacOS

If you are trying to execute a binary file made through and for Windows Operating Systems , it may not work directly in your Unix systems. You will have to download a package that can transform an unmodified Windows binary to Unix usable ones.

Use the below link to download the WineHQ

Provide the permission

One more reason for cannot execute a binary file is that the permission is not granted. To fix this, type the below in the PowerShell:

Using the sh command

Try the below syntax:

Using dos2unix command

In Powershell, use the command:

Check if it works out or not.

Uncompress the file

Check if the below line aids in executing the file:

If your file is in a zipped format, try unzipping the compressed format and executing it as usual.

Remember to place the path address along with the name of the file.

What is cannot execute binary file

If you download a binary file from the internet and try to execute it in PowerShell, sometimes you may encounter an error known as “Cannot execute binary file.

The Linux Operating System failed to execute (run or open) the specified file you mentioned in the previous line due to technical issues. A few reasons as to why this error has occurred are provided below.

Causes for cannot execute binary file

There can be broadly two reasons for a binary file to show “Cannot execute binary file” error:

1. The file is an exe file and is compile only for Windows.
2. The bit architecture of your system and the bin file does not match.

Fix: Cygwin cannot execute binary file

You can use Shell commands in Windows after downloading and installing the Cygwin application.

If you have executed:
C:cygwinbinfilename.exe -h always /bin/bash -l ls

Try this syntax:
C:cygwinbinfilename.exe -h always /bin/bash -l -c ls

If still, it didn’t work, try uninstalling and reinstalling all the necessary files of Cygwin again.

Java- Cannot execute binary file

If the Shell or Cmd Prompt window displays an “Exec format error” error, it wants to say that the current version is not compatible with your system.

If you are using AMD/ Intel processes, install the Linux/x64 build from here.

If you are using ARM type of processors: install the Linux-aarch64 build from here.

Источник

Widget Errors

This section helps you troubleshoot common widget errors on the Appsmith platform.

Binding errors​

You may see below errors when binding data to widgets from an API, Query, JS object.

Sync field error​

You may see this error when executing an API, Query, JS Object in a widget property that expects data, and can’t be used to trigger an action.

Error message​

Cause​

Action refers to the execution of an API, Query, or JS object. You can only perform an action by binding it to an async field. When you bind an action to a sync field that only expects data, it throws an error.

Example: if you are executing a storeValue() function in a TableData property of a table. The TableData property expects data and can’t execute a function, and results in an error. Similarly, if you try to execute a JS Object function in the TableData property, it throws an error.

Solution​

Invoke the data property of an API, Query or JS object.

For example, you have a JS Object getLoggedInUserInfo , which has a function getFullNameOfLoggedInUser . The function returns the full name of the logged-in user. You wish to add the full name and create a welcome text, Welcome! . Bind the response of getFullNameOfLoggedInUser function to a text widget by calling the .data property. To bind the response, add the below code snippet in a mustache ( <<>> ) sign.

JSON form errors​

You may see the below errors when working with a JSON Form widget.

Source data exceeds 50 fields​

You may see an error message when you try to bind a large query/API response to the source data property of the JSON Form widget.

Error message​

Cause​

The problem can be caused when you are trying to bind:

• A large array of multiple JSON objects
• A huge JSON object which has a lot of fields
• The whole query data rather than a selected row or triggered row in a table

Solution​

To determine if the problem is caused due to:

• A large array or a huge JSON object — You can re-look at the data and evaluate the need to display all the data on UI, as it would be painful for your users to navigate more than 50 fields.
• The whole query response that you bound to the source data — You recheck the source data field you are trying to bind and select either the selected row / triggered row to bind.

Once you have figured out the new structure for the data, head to the source data field to make changes.

Источник