|
Hi, After the recent Nvidia driver update the game became unplayble on DX11, so I had to change to vulkan and now runs smooth again but, I get this error message from Vulkan saying: «Unable to save current preset. Make Sure you have write permissions to E:CEMUDefaultPreset.ini».
That’s the problem, the folder no longer exist. This was my WiiU Emulator folder but it’s been a while that I deleted that. So, I don’t know what to do, hope you guys can help me out. Last bumped3 окт. 2020 г., 20:48:52 |
Сообщение
Цитировать это сообщение |
sounds like you didn’t uninstall it properly. Maybe check your regedit for thins needed to be removed ?? |
Сообщение
Цитировать это сообщение |
|
Damn, I don’t like to mess with regedit but after open it I found a lot of stuff related to CEMU, I don’t know what to delete. |
Сообщение
Цитировать это сообщение |
|
Update I deleted everything related to CEMU on my Registry Editor, and no changes. I still get the error. |
Сообщение
Цитировать это сообщение |
|
CEMU probably change settings for some vulkan layers (layers are a kind of vulkan plugins to keep things simple) There is an optional system variable to set vulkan layers VK_INSTANCE_LAYERS 1. use (windows key+R) I don’t know if CEMU uses other vulkan variables (but you should remove them if you see others here). As far as i know, vulkan system variables are mainly for development and no games add them (i don’t have any on my pc unless i play with the vulkan dev kit). Последняя редакция: MrVaad. Время: 2 окт. 2020 г., 23:14:30 |
Сообщение
Цитировать это сообщение |
These are the only variables that I have. Последняя редакция: dirtyrottenflieger. Время: 2 окт. 2020 г., 23:37:08 |
Сообщение
Цитировать это сообщение |
|
Hmmm, then i don’t know how they mess with vulkan. Последняя редакция: MrVaad. Время: 2 окт. 2020 г., 23:55:44 |
Сообщение
Цитировать это сообщение |
|
Oh well, I guess I’ll have to learn to live with the message until nvidia fix their shit and I can switch back to dx11. |
Сообщение
Цитировать это сообщение |
|
Okaay, it seems there’s also a way to do the same thing through the registry, look at : HKEY_LOCAL_MACHINESOFTWAREKhronosVulkanExplicitLayers Keep layers used by your programs (steam for example) znd perhaps some settings that CEMU has modified in Последняя редакция: MrVaad. Время: 2 окт. 2020 г., 23:59:27 |
Сообщение
Цитировать это сообщение |
So, I only have Implicit keys:
And for the looks of it the only one that I don’t know what it’s about is the ReShade64 one, so I don’t know if I can delete it or not. And I tried to search for CEMU once again on the regedit and this came up:
But same thing, I don’t know if I can delete that one. Maybe I have to reinstall Vulkan? Последняя редакция: dirtyrottenflieger. Время: 3 окт. 2020 г., 1:32:13 |
Сообщение
Цитировать это сообщение |
Обновлено: 11.02.2023
This solution is for people who have installed ReShade using the installer from this site. If you have downloaded a mod somewhere, seek help from its creator — this is not their support forum. If that’s not possible, see solution 1.
1) The «Do it for me / I don’t wanna read» solution:
a) Delete the entire game folder and re-download the game. No, just uninstalling the game will not work.
2) The «But I don’t wanna re-download my game and still don’t wanna read» solution:
a) Go to the game’s executable folder and delete any of the following files you see:
3) The «Okay, fine, I’ll read» solution:
Follow the solution to question 2, then delete any of these additional files:
Please Log in or Create an account to join the conversation.
Re Uninstall Re-Shade NOT WORKING.
I have followed the instructions above & deleted just two files plus the ReShade Folder.
But I still get a message advising of a ReShade update every time I start my Lockhead Martin P3D flight simulator.
When I press SHIFT+F2 I still get the ReShade menu though none of the links work.
I really do not wish to uninstall/reInstall P3D because it’s a very complicated simulator & i have many hardware addons calibrated to P3D.
There must be files located somewhere.
Why does this program not have an Uninstall option? Beats me!
Please can someone help me to remove this ReShade software from my P3D installation.
Please Log in or Create an account to join the conversation.
What game, is it just that game, and did you delete the game folder completely and reinstall it?
Please Log in or Create an account to join the conversation.
Re Uninstall Re-Shade NOT WORKING.
I have followed the instructions above & deleted just two files plus the ReShade Folder.
But I still get a message advising of a ReShade update every time I start my Lockhead Martin P3D flight simulator.
When I press SHIFT+F2 I still get the ReShade menu though none of the links work.
I really do not wish to uninstall/reInstall P3D because it’s a very complicated simulator & i have many hardware addons calibrated to P3D.
There must be files located somewhere.
Why does this program not have an Uninstall option? Beats me!
Please can someone help me to remove this ReShade software from my P3D installation.
Run said game
now execute this command on your keyboard
CTRL+SHIFT+ESCAPE
This will open Task Manager
now under the Processes or Details tab find the games .exe file
now right click on the games .exe file and click Open File Location
Delete the files mentioned in the OP.
Please Log in or Create an account to join the conversation.
There are log files as well, for instance d3d9.log. Should follow the same naming syntax.
Please Log in or Create an account to join the conversation.
Good afternoon, it appears to me whenever I open FiveM the following message, «Unable to save current preset. Make sure you have write permissions to C: Users User AppData Local FiveM FiveM.app cache subprocess DefaultPreset. ini. » can you explain to me how do I make the message disappear? Thank you.
Please Log in or Create an account to join the conversation.
I had ReShade installed about 2 years ago on Minecraft. I feel like I’ve deleted every folder with anything to do with ReShade. I can go to the MinecraftLauncher.exe folder as much as I want and I can’t find any of those folders. If anyone knows where they’re located it would be a big help.
Please Log in or Create an account to join the conversation.
I’ve recently downloaded and installed a wholly new game on my system (Red Dead Redemption 2). I have NEVER used Reshade with this title, ever. There are no Reshade DLLs or Shaders in the game directory.
Yet EVERY time I boot RDR2 I get the «Reshade is now installed succesfully! Press Home to. » popup.
I don’t want reshade to be running. This game crashes for me constantly and I have a suspicion that Reshade has something to do with it, as I’ve exhausted all other options. It even pops up when I run the game in DX12 mode, when supposedly I’ve only installed Reshade for Vulkan games. And yes, before anyone asks, I did run the installer again and unchecked the option that enables Reshade globally in all Vulkan games. But the message still pops up regardless of whether I boot RDR2 in Vulkan or in DX12 mode.
I used the 4.9.1 installer to get reshade working on CEMU for Breath of The Wild while using the Vulkan renderer. But that’s been quite a while ago, and that’s no reason for it to show in games that have absolutely nothing to do with my CEMU install.
It is absolutely bonkers that an installer can apparently place files in my system and no one seems to be aware of the fact that this is happening, and the installer program doesn’t allow for an «uninstall» option. So now I’m stuck with this mess with no way to remove it.
I’d like to ask the creator of Reshade to include a full uninstall option in the installer, or at the very least to divulge what type of files the installer creates so they can be manually removed. Because apparently the «toggle on/off» button isn’t working, and the installer isn’t divulging any information on what changes it makes when you toggle options or install files.
Thanks in advance for the help!
Please Log in or Create an account to join the conversation.
Unticking the checkbox does a full uninstall (it deletes all files ReShade created in C:ProgramDataReShade + the relevant Vulkan layer registry keys), there is no other option to include. Latest ReShade setup also clearly warns you about what is happening before you can tick that checkbox on.
You can also open up «Log» tab in the UI and check the first log message. It will tell you where ReShade got loaded from («Initializing [. ] loaded from «<path>» [. ]»). My guess is that you did in fact install ReShade multiple times (once globally, which was disabled again and once locally to RDR2) and have not uninstalled the local installation again.
Please Log in or Create an account to join the conversation.
I’ve recently downloaded and installed a wholly new game on my system (Red Dead Redemption 2). I have NEVER used Reshade with this title, ever. There are no Reshade DLLs or Shaders in the game directory.
Yet EVERY time I boot RDR2 I get the «Reshade is now installed succesfully! Press Home to. » popup.
I don’t want reshade to be running. This game crashes for me constantly and I have a suspicion that Reshade has something to do with it, as I’ve exhausted all other options. It even pops up when I run the game in DX12 mode, when supposedly I’ve only installed Reshade for Vulkan games. And yes, before anyone asks, I did run the installer again and unchecked the option that enables Reshade globally in all Vulkan games. But the message still pops up regardless of whether I boot RDR2 in Vulkan or in DX12 mode.
I used the 4.9.1 installer to get reshade working on CEMU for Breath of The Wild while using the Vulkan renderer. But that’s been quite a while ago, and that’s no reason for it to show in games that have absolutely nothing to do with my CEMU install.
It is absolutely bonkers that an installer can apparently place files in my system and no one seems to be aware of the fact that this is happening, and the installer program doesn’t allow for an «uninstall» option. So now I’m stuck with this mess with no way to remove it.
I’d like to ask the creator of Reshade to include a full uninstall option in the installer, or at the very least to divulge what type of files the installer creates so they can be manually removed. Because apparently the «toggle on/off» button isn’t working, and the installer isn’t divulging any information on what changes it makes when you toggle options or install files.
Thanks in advance for the help!
I agree, I installed reshade to mess around with it on World of Warcraft : Classic. It dropped my frames so much and wasn’t worth the time to adjust fliters to make it look good and all the community presets suck.
That aside, You are right! I tried to uninstall by manually deleting all the directx DLL’s it installed but that didn’t work, Tried the «Uninstaller» that comes with reshade, nope .
Funny thing is , It even shows » Reshade 4.0.2 » on every applcation that uses direct x .
Heres a screenshot of an application i use called ajour to update my addons which is in a complete diffrent drive than any of my reshade files :
So i know for a fact reshade imbed’s itself system-wide. And I modify my nvidia driver’s and update and remove video drivers alteast once every month so uninstalling my nvidia drivers and reinstalling them doesn’t work either.
Maybe uninstalling direct X and reinstalling it? Ill write back after I give it a try.
*****EDIT*****
It’s the vulkan counterpart of Reshade.. It is a system wide runtime which I knew might be the issue.
Okay, the soulution I found to work for me.
Download the latest Reshade Installer EXE , Right click it and » Apply to all users » then click run as administrator. Exit out of this tab.
Run reshade, click » Enable reshade in Vulkan Globally » , then select the game you installed reshade on originally or a random game.
Pick whatever direct x implementation the game uses and uncheck all shaders and hit ok and once you get to the » Edit Reshade Settings » Close the window.
Re Run Reshade Installer , UNSELECT » Enable reshade in Vulkan Globally » * This is our issue with reshade still enabled system wide after uninstalling * and go through the same previous steps in my guide.
Select the same game you selected earlier and the same direct x method and uninstall again.
I know it doesn’t make much sense to reinstall reshade eventhough it’s obviously still in our system’s but this is the onlyway I found to easily uninstall the vulken reshade runtime.
Red Dead Redemption 2 «Реалистичность — пресет для Reshade»
Если вам нужна реалистичность, этот пресет вам поможет!
- Установите Reshade версии 4.9.1 и проверьте все эффекты. [Выберите основной exe-файл для установки reshade, а не файл запуска (размер основного файла больше, чем размер файла запуска)]
- Загрузите и скопируйте предустановку reshade в папку .exe.
- Запустите игру, затем нажмите кнопку «home».
- Выберите мой файл.
Если вам не нужна дополнительная ясность, на главном экране снимите флажок Amd Fidelityfx.
Мыло или рябь
без сглаживания
taa
собственно играю на карточке gtx 1660 , с ультра — средним пресетом получилось найти середину для 50-60 кадров, но жуть как раздражает мыло от taa, а без него деревья и трава буквально рассыпаются на пиксели, скрины получились пережатые, но в движении в игре это выглядит очень плохо , taa превращает деревья дальше чем в 10 метрах в кашу, кожа на лице просто пластиковая, звездное небо размыто, уже пробовал и фильтры от нвидиа экспириэнс и все возможные настройки графики, msaa карточка не тянет, слишком сильно ест производительность, да и помогает только на значениях от 4x, пробовал запускать в 4к тоже отлично смотрится без сглаживаний, но опять же 30кадров и ниже, пробовал менять настройки в самом драйвере нвидиа, но они вообще не влияют ни на что, ничего кроме энергопотребления не работает, мб есть способ убрать эту пикселизацию?
в соло игре даже с taa в фоторежиме все выглядит не плохо, но блин на скринах у людей на лице поры видны, у меня просто пластик
это настройки с которыми обычно играл, только последнее время еще затенение на ультра выкручивал
Uninstall Reshade from Red dead R2
Please Log in or Create an account to join the conversation.
I found the solution . Delete a file named Reshade in C://Program Data/
Please Log in or Create an account to join the conversation.
The setup tool specifically tells you that enabling the global option will enable ReShade for ALL Vulkan games (which RDR2 is, no matter which API is actually active). To uninstall, simply uncheck that checkbox again.
Please Log in or Create an account to join the conversation.
I agree I decline
Читайте также:
- Фоллаут 76 как начать заново
- Как десантироваться в hearts of iron 4
- Что такое некрономикон
- Как использовать трейнер в the escapists
- Horizon сколько частей
#1
Posted 19 August 2020 — 04:55 pm
Reshade for sharper and clearer visuals
Reshade for better clarity, sharpness, removed yellow filter and better contrast.
- Back to top
Back to top
#2
shadowelves88
Posted 28 August 2020 — 01:53 am
shadowelves88
-
- Members
-
- 3 posts
Stranger
looks great but i have a problem. It does not save and the red writings stay on top, says «unable to save current preset. make sure you have write permission to AC orgins.ini
- Back to top
#3
Tar
Posted 28 August 2020 — 07:26 pm
Tar
-
- Premium Member
-
- 794 posts
Old hand
In response to post #84516493.
Hi Im sry to hear that. The only thing I can think about right away is that AC orgins.ini need write permission. So I suggest you check if you can edit/change files in the folder, or if read-only is enabled in file properties. I will come back if I can think of anything else.
If not use «take ownership» tools or change security settings on that folder. Program files folders is typical protected by windows.
Edited by Tar, 28 August 2020 — 07:28 pm.
- Back to top
#4
TheRealBee
Posted 30 September 2020 — 08:48 pm
Hi. I love it !!! It would be perfect if i would be able to save the preset…Same as Shadow in the comment section…RED writing saying unable to save current preset…You think that there is any way to fix this? I tried to give permission to write the Ubisoft folder but for some reason it sets itself back to only read.
- Back to top
#5
Tar
Posted 26 October 2020 — 07:47 pm
Tar
-
- Premium Member
-
- 794 posts
Old hand
In response to post #85578543.
Sry for late reply, but I recommend to not install on C drive, windows is very protective of both program files folders.
- Back to top
#6
claualarcon
Posted 25 January 2021 — 06:09 am
claualarcon
-
- Members
-
- 2 posts
Stranger
If for someone the .ini is not loading when you start the game, check inside the ReShade.ini and change the current path. It says «F:UbisoftAssassin’s Creed OriginsAC origins.ini». Change everyhting before «/AC origins.ini» for the installation path in your machine.
- Back to top
#7
claualarcon
Posted 25 January 2021 — 06:14 am
claualarcon
-
- Members
-
- 2 posts
Stranger
In response to post #89711363.
Oh and great work! I absolutely love what you did with the colors, everything is so interesting to watch right now!
- Back to top
#8
dgibbs0911
Posted 26 December 2021 — 08:58 pm
dgibbs0911
-
- Premium Member
-
- 4 posts
Stranger
This seems to have broken my game, installed Reshade and this per instructions provided and the game now no longer launches. Shows the title splash after pressing Play in the Uplay launcher and then immediately closes the game.
- Back to top
#9
minimax2021
Posted 31 December 2022 — 12:08 am
minimax2021
-
- Members
-
- 5 posts
Stranger
In response to post #89711363. #89711463 is also a reply to the same post.
change how
- Back to top
I use IntelliJ IDEA 15 and have a problem with the auto-saving. For example I make a new configuration, e.g. Show the line number. When I close IntelliJ and reopen my IDE, it doesn’t save my configuration and shows me this message:
Unable to save settings : Failed to save settings . Please restart IntelliJ IDEA
Leigh
28.7k10 gold badges53 silver badges102 bronze badges
asked Apr 7, 2016 at 14:23
6
I get this too (IntelliJ 15.0.5), but only when the «Markdown support» plugin is used. Once a .md file is visualised the error starts appearing.
For future reference current version: 2016.1.20160405.143
Not a very solution-oriented post, but maybe this can help someone further pinpoint the source of the error.
answered May 2, 2016 at 16:27
Jon LauridsenJon Lauridsen
2,4013 gold badges30 silver badges38 bronze badges
4
This workaround allows you continue using «Markdown Support».
Uninstall the latest version of «Markdown Support» and install version «8.0.0.20160127.143.1» from https://plugins.jetbrains.com/plugin/7793?pr=idea. Everything works fine.
answered May 19, 2016 at 1:56
Devs love ZenUMLDevs love ZenUML
11k8 gold badges53 silver badges65 bronze badges
5
I was receiving the error with:
- IntelliJ v15.0.6
- «Markdown support» plugin version 2016.1.20160405.143
I uninstalled the Markdown support plugin (IntelliJ IDEA > Preferences… > Plugins > Markdown support), restarted IntelliJ, and am now able to save without error.
Jai Chauhan
3,8253 gold badges36 silver badges58 bronze badges
answered May 14, 2016 at 4:12
1
I have tried everything from this SO thread but it did not work. I solved it by deleting the .idea folder from my project’s Windows path and then restarting intellij.
cb4
5,5395 gold badges43 silver badges54 bronze badges
answered Apr 19, 2021 at 10:41
CodeSlaveCodeSlave
4156 silver badges21 bronze badges
This can also happen when the disk drive where the currently opened project is stored is full (0 bytes left on device). The system tries to write to the .idea folder but cannot, so it gives the same error as if there were no access rights.
This happened to me as there was a process writing to disk in the background until it was full.
answered Feb 25, 2020 at 17:51
brettbrett
7155 silver badges15 bronze badges
1
I delete this file : .IntelliJIdea
When I launch ./idea I should reconfigure all IntelliJ system (config/ extention/ theme/ licence …)
So It’s okay now but I think is not a good solution …
answered Apr 8, 2016 at 13:05
Saidi MarwénSaidi Marwén
8171 gold badge7 silver badges18 bronze badges
0
Workaround for Windows users.
My installation is located in:
«C:Program FilesJetBrainsphpstorm»
The location gives it problems with the saving of files. (probably to do with user rights and UAC, not totally figured out what rights the folder needs, but for easy resolving I removed and reinstalled Phpstorm to
«C:developmentphpstorm» and it resolved the issue.
Jai Chauhan
3,8253 gold badges36 silver badges58 bronze badges
answered Apr 30, 2017 at 13:20
Jasper LankhorstJasper Lankhorst
1,7101 gold badge15 silver badges22 bronze badges
For those who have a simular issue on windows machines:
I have applied the «hidden» property for the .[IntelliJ-Produkt][Version] folder in Users/[Username] folder. This was causing the issue. Don’t do that.
answered Apr 19, 2019 at 23:03
I encountered this problem when I open up IDEA for the first time after copying the old config files backed up with my Live CD USB before reinstalling my Ubuntu. I think it is because I copied the files from the old OS and to the new OS as root, so the ownership of the folder is changed. Now when I want to write to it as another user, it blocks me from doing it.
Change the ownership to your user and change permission to add write solves it. You use chown and chmod.
answered May 31, 2021 at 6:15
WesternGunWesternGun
10.4k3 gold badges83 silver badges139 bronze badges
2
On OSX, I’ve uninstalled PhpStorm, and then have installed it again, always by using the JetBrains TOOLBOX.
Hope it helps!
answered Jul 14, 2017 at 12:43
I faced the same issue today and it might help some people if above solutions cant help. I am using dual boot system. Win 8 and Kubuntu. I got this problem with my intellij installed in Kubuntu. I realized my project was in a NTFS partition which was marked as READ ONLY. This happens sometimes when you shutdown windows and start computer into your linux.
Solution is to go back to your windows OS and restart it and switch to linux. Also, you could hold shift and press shutdown button, then choose to turn of your pc in the blue menu.
answered Jul 3, 2019 at 5:21
Sepehr GHSepehr GH
1,2691 gold badge15 silver badges39 bronze badges
On windows 10 I had the same problem, I ran PhpStorm as administrator which fixed permission issues it had.
Then I restarted PhpStorm without administrator permissions and everything worked fine.
It was a fresh install so no plugins other then the build in ones.
answered Jan 20, 2017 at 15:24
DarkMukkeDarkMukke
2,4691 gold badge24 silver badges30 bronze badges
I’ve encountered this issue multiple times; rebooting my (windows) computer has always worked for me (while restarting Intellij didn’t do anything).
answered Sep 28, 2017 at 20:13
6infinity86infinity8
2754 silver badges10 bronze badges
It’s because you don’t have permission to save settings. On my macOS, I set write permission of my project.
answered Feb 4, 2021 at 13:52
1
I got same error message for InteliJ WebStrorm saying
Unable to save settings
Failed to save settings. Please restart WebStorm
It happened due to permission issue. if you don’t have permission to save this message could pop-up. Please make sure you have write permission to the folder you are saving.
answered Oct 4, 2016 at 13:03
I might be late at answering this but I did not see any accepted answers here.
I got a solution to this on other forum.
They suggested to start IntelliJ IDEA as Administrator.
It worked for me.
Hope it helps people who come here searching for answers.
answered Feb 27, 2017 at 14:10
Murtuza KMurtuza K
1652 silver badges10 bronze badges
for my Ubuntu, i fixed it by issuing this command.
sudo chmod 777 /path/to/dir
answered Feb 26, 2020 at 15:08
1
Hey, I updated to Build 424 today and found I cannot save or make FX/Transition presets or any presets. Its really annoying and I’ve never had this problem before. Please help or fix soon. -Thanks!
Comments
j-v
wrote on 11/12/2021, 10:15 AM
No problem here, look
I’ve been doing that, but it doesn’t save for me.
See:
(Sorry it didn’t save my cursor. Requested feature for Vegas Stream 
j-v
wrote on 11/12/2021, 11:24 AM
It was for me hard to see in your video but how did you save the preset?
Musicvid
wrote on 11/12/2021, 11:53 AM
You must give your new preset a unique name. You cannot overwrite a default preset. You must run Vegas as Administrator and have write permission to the preset folder.
@j-v I did it exactly as in your vid. I saved across from where I typed the new preset name.
j-v
wrote on 11/12/2021, 12:56 PM
And did you after giving a new name also pushed the «save» button?
Yes, I did that. 1 and 2.
Definitely because of the Windows Security
It was the “Virus and threat protection”— “Virus and threat protection settings”— “Controlled folder settings”
You need to add the Vegas Pro original folder path there, so it will be allowed for you to add folders & rename files there.