Windows 10: Error 0x80131534 : Unknown COM Status Code when trying to run Crystal Reports in Windows 10 Pro
Discus and support Error 0x80131534 : Unknown COM Status Code when trying to run Crystal Reports in Windows 10 Pro in Windows 10 Drivers and Hardware to solve the problem; I have an Accounting application that when it prints reports is supposed to call the Crystal Reports to display and print the report. It works fine on…
Discussion in ‘Windows 10 Drivers and Hardware’ started by BillRosman, Apr 5, 2019.
-
Error 0x80131534 : Unknown COM Status Code when trying to run Crystal Reports in Windows 10 Pro
I have an Accounting application that when it prints reports is supposed to call the Crystal Reports to display and print the report. It works fine on one PC, but on one particular PC it does not work and returns this error message:
Error 0x80131534 : Unknown COM Status Code
I installed Crystal Reports on its own and runs fine. But when the program calls Crystal, I just can’t get it to work. It seems to be a Windows problem and something having to do with the security of this PC not allowing control to another program. I’ve tried almost everything to no avail.
As I said, it works fine on other PC’s but not this one.
This particular PC does not allow me to setup GoToAssist unattended access, which I can do on others. So something about this particular PC is weird. Perhaps anyone has seen this before? Let me kjnow if you need any more info.
-
Crystal Report having selection formulas stop work on Win 10 Creator, Unknown Query Engine Error
Hi,
This kind of issue is more complex than what is normally posted here in the Community. We suggest that you post your query in our
MSDN Forum for further assistance.Regards.
-
Error code 0x8009000f on upgrading to Windows 10 from Windows 7 Pro.
Original Title: upfrade to Win 10
In trying to upgrade my Windows 7 Pro to 10, when it started the upgrade if halted with the error code 0x8009000f. I cann ot find this error code in any of the online listings. Any Suggestions? RES
-
Error 0x80131534 : Unknown COM Status Code when trying to run Crystal Reports in Windows 10 Pro
Window10 couldn’t be installed error code 80070003
I have tried both of the steps suggested by Raju above.
I deleted edb.log and
SFC reported ‘no problems’.
Restarted Windows 7 and went thru the download and preparing for installation.
Same results
Windows 10 couldn’t be installed
Code 80070003 Windows Update encountered an unknown error
What’s the diagnosis to try next?
THX
Error 0x80131534 : Unknown COM Status Code when trying to run Crystal Reports in Windows 10 Pro
-
Error 0x80131534 : Unknown COM Status Code when trying to run Crystal Reports in Windows 10 Pro — Similar Threads — Error 0x80131534 Unknown
-
Crystal Report ActiveX report in Landscape orientation stopped working in Windows 10
in Windows 10 Gaming
Crystal Report ActiveX report in Landscape orientation stopped working in Windows 10: We have a third party ASP.NET based windows application which can generate multiple reports using Crystal Report ActiveX, those reports may be in Landscape or Portrait orientation depending on the type of report.Please note that the Application is installed on Windows 2008 R2… -
Crystal Report ActiveX report in Landscape orientation stopped working in Windows 10
in Windows 10 Software and Apps
Crystal Report ActiveX report in Landscape orientation stopped working in Windows 10: We have a third party ASP.NET based windows application which can generate multiple reports using Crystal Report ActiveX, those reports may be in Landscape or Portrait orientation depending on the type of report.Please note that the Application is installed on Windows 2008 R2… -
Crystal Report ActiveX report in Landscape orientation stopped working in Windows 10
in Windows 10 BSOD Crashes and Debugging
Crystal Report ActiveX report in Landscape orientation stopped working in Windows 10: We have a third party ASP.NET based windows application which can generate multiple reports using Crystal Report ActiveX, those reports may be in Landscape or Portrait orientation depending on the type of report.Please note that the Application is installed on Windows 2008 R2… -
Problem with crystal report in windows 10 21H1
in Windows 10 Gaming
Problem with crystal report in windows 10 21H1: Dear microsoft and support team.I have some questions about the install crystal report runtime on windows 10.My customer’s PC: — Windows 10 pro 64bit OS build 19043.1237 — installed crystal report runtime 64bit — version 13.0.24After upgrade to windows 10 21H1 some problem… -
Problem with crystal report in windows 10 21H1
in Windows 10 Software and Apps
Problem with crystal report in windows 10 21H1: Dear microsoft and support team.I have some questions about the install crystal report runtime on windows 10.My customer’s PC: — Windows 10 pro 64bit OS build 19043.1237 — installed crystal report runtime 64bit — version 13.0.24After upgrade to windows 10 21H1 some problem… -
Problem with crystal report in windows 10 21H1
in Windows 10 Installation and Upgrade
Problem with crystal report in windows 10 21H1: Dear microsoft and support team.I have some questions about the install crystal report runtime on windows 10.My customer’s PC: — Windows 10 pro 64bit OS build 19043.1237 — installed crystal report runtime 64bit — version 13.0.24After upgrade to windows 10 21H1 some problem… -
Error Code when trying to run slmgr /ipk
in Windows 10 Updates and Activation
Error Code when trying to run slmgr /ipk: So basically something happened to my key with windows a month or so after I got my computer. I got in January btw. I have windows installed but it deactivated so I am trying to use the code TX9XD-98N7V-6WMQ6-BX7FG-H8Q99 Which I have found after browsing around for a little… -
STATUS UNKNOWN
in Windows 10 Network and Sharing
STATUS UNKNOWN: [ATTACH]Anyone who knows how to fix this issue? «Status unknown…»
https://answers.microsoft.com/en-us/windows/forum/all/status-unknown/a72f88a7-8794-421f-bb91-c783a6d72424
-
CRYSTAL REPORT UNABLE TO CAST REPORT
in Windows 10 Drivers and Hardware
CRYSTAL REPORT UNABLE TO CAST REPORT: When I click to view and print in a program using crystal report I get this error report below. How do I resolve this error below in window 10 and I am using crystal report CRRuntime_32bit_13_0_24.msiSee the end of this message for details on invoking
just-in-time (JIT)…
Users found this page by searching for:
-
WIN 10 0x80131534
|
|||||||||||
|
Для устранения данной ошибки Вам необходимо:
1. Снять регистрацию с библиотек адаптера: excon.dll и EsphereUpdateProduct.dll;
2. Сделать резервную копию данных библиотек;
3. Провести регистрацию.
Для снятия регистрации библиотек: C:WindowsMicrosoft.NETFrameworkv4.0.30319RegAsm.exe /unregister «путь_к_библиотеке»/
Регистрация производится командами: C:WindowsMicrosoft.NETFrameworkv4.0.30319RegAsm.exe /codebase «путь_к_библиотеке»/
В случае, если Вы используете 64-х разрядную версию Windows и 1С, то Вам необходимо проводить регистрацию указанных выше библиотек с использованием 64-х разрядной версии Framework (C:WindowsMicrosoft.NETFramework64v4.0.30319RegAsm.exe).
Hi,
Visual Studio Community 2017, Windows 10, Windows and Office (CTR) fully updated.
Writing an Add-in for MS Project. Have simply created a new project, added Ribbon designer and .xml. Test time and after clicking the button in Project I get:
System.TypeInitializationException
HResult=0x80131534
Message=The type initializer for ‘TaskUpdate.TaskUpdateMain’ threw an exception.
Source=TaskUpdate
StackTrace:
at TaskUpdate.TaskUpdateMain.UpdateTasks() in C:Visual Studio ProjectsTaskUpdateTaskUpdateTaskUpdateMainCode.vb:line 6
at TaskUpdate.PR_Ribbon_XML.UpdateTasksButton_Click(IRibbonControl control) in C:Visual Studio ProjectsTaskUpdateTaskUpdatePR-Ribbon-XML.vb:line 38
Inner Exception 1:
InvalidCastException: Unable to cast object of type ‘System.__ComObject’ to type ‘Microsoft.Office.Interop.MSProject.ApplicationClass’.
This is Project 2016 and Office 2016 from MSDN.
The TaskUpdate code gets called fine:
<Runtime.InteropServices.ComVisible(True)> _
Public Class PR_Ribbon_XML
Implements Office.IRibbonExtensibility
Private ribbon As Office.IRibbonUI
Public Sub New()
End Sub
Public Function GetCustomUI(ByVal ribbonID As String) As String Implements Office.IRibbonExtensibility.GetCustomUI
Return GetResourceText(«TaskUpdate.PR-Ribbon-XML.xml»)
End Function
#Region «Ribbon Callbacks»
‘Create callback methods here. For more information about adding callback methods, visit https://go.microsoft.com/fwlink/?LinkID=271226
Public Sub Ribbon_Load(ByVal ribbonUI As Office.IRibbonUI)
Me.ribbon = ribbonUI
End Sub
Public Sub UpdateTasksButton_Click(ByVal control As Office.IRibbonControl) ‘, ByVal isPressed As Boolean)
UpdateTasks() ‘Error happens here
End Sub
#End Region
Module TaskUpdateMain
Public ProjectApp As New MSProject.Application
Public Sub UpdateTasks()
MsgBox(«Hello World»)
End Sub
End Module
Once this runs (no error messages in build) I can convert my VBA code and I’m away.
Can anyone help please?
Many thanks,
Rod
Rod Gill
Author of the one and only
Project VBA Book and VBA developer.
www.project-systems.co.nz
|
|||
Проказник
07.12.17 — 20:18 |
Подскажите что может быть. на Server 2008 и Windows7 работает кусок а на Server 2012 R2 нет.
Ошибка при вызове конструктора (COMОбъект) |
||
Сияющий в темноте
1 — 07.12.17 — 20:24 |
Его там просто нет. |
||
Проказник
2 — 08.12.17 — 17:51 |
он там есть. Это видно в настройках DCOM. |
||
hhhh
3 — 08.12.17 — 17:54 |
(2) прав нет |
||
Cyberhawk
4 — 08.12.17 — 17:54 |
Выполни код для начала на клиенте |
||
Cyberhawk
5 — 08.12.17 — 17:54 |
Если и на клиенте не взлетит, тогда уж думать. Если взлетит, то в правах скорее всего дело (для пользователя ОС службы агента) |
||
Проказник
6 — 08.12.17 — 18:00 |
на клиенте также не взлетает |
||
Проказник
7 — 08.12.17 — 18:00 |
(3) прав на что ? я админ на сервере. что добавить. |
||
tndr
8 — 08.12.17 — 18:04 |
А если посмотреть логи винды? Может там какую-то информацию выудить получиться? |
||
Проказник
9 — 08.12.17 — 18:05 |
читаю — ничего нет пока. |
||
Сияющий в темноте
10 — 08.12.17 — 18:08 |
обьект то net-овский,net стоит? |
||
Проказник
11 — 08.12.17 — 18:13 |
(10) вот в Server Manager смотрю 4,5 поставлен. |
||
Проказник
12 — 08.12.17 — 18:30 |
помогло. надо было .Net 3.5 поставить. |
||
Сияющий в темноте 13 — 08.12.17 — 19:06 |
Засада .net в том, что у них нет обратной совместимости. |
ВНИМАНИЕ! Если вы потеряли окно ввода сообщения, нажмите Ctrl-F5 или Ctrl-R или кнопку «Обновить» в браузере.
Тема не обновлялась длительное время, и была помечена как архивная. Добавление сообщений невозможно.
Но вы можете создать новую ветку и вам обязательно ответят!
Каждый час на Волшебном форуме бывает более 2000 человек.
- Remove From My Forums
-
Question
-
Hi,
at the moment I have the problem that I cannot protect one of my Sharepoint farms.
In the DPM Protection pane the Protection status is «Backup metadata enumerating failed».
In the Monitoring pane the status is completed with the description:The job completed successfully with the following warning:
DPM could not resolve the SQL alias S000257SP2010_INT on the SharePoint front-end web server. (ID 31250 Details: Unknown error (0x80131534) (0x80131534))I checked the alias on both WFE servers, there set in 32bit and 64bit and are TCP/IP.
So I tried to force the sharepoint catalog to populate again with the powershell command:
Get-ProtectionGroup yourdpmservername |get-datasource |where-object {$_.type -like «*sharepoint*»} | start-createcatalog
I then get a error message in DPM:
Type: SharePoint Catalog Task
Status: Failed
Description: An unexpected error occurred while the job was running. (ID 104 Details: Unknown error (0x80131534) (0x80131534))
End time: 21.02.2013 13:22:54
Start time: 21.02.2013 13:22:54
Time elapsed: —
Data transferred: 0 MB (0 bytes)In Eventviewer of the DPM I get the warning:
DPM failed to gather item level catalog for 14 database(s) of the SharePoint Farm SP2010_Int_GeneralSP2010_Int_Farm_Config on servername. Some of the recovery points for these databases in the farm would be associated with an earlier successful
catalog. (ID: 3133)I already tried to configuresharepoint.exe again & deleting and adding the Sharepoint to the backup.
All VSS writers are stable and No errorAt the moment, I don’t know where else to look…
Answers
-
Hi,
Possible other causes.
• SharePoint VSS Writer is in failed state.
• SharePoint VSS Writer isn’t running
To check — from administrative command prompt Run: diskshadow.exe — then list writers, search output for «SharePoint Services Writer»• SharePoint farm administrator don’t have SQL Permissions
• Account used by configuresharepoint –enablesharepointprotection doesn’t have SQL Permissions
The account used needs to be SharePoint Farm administrator and hold sysadmin role on the SQL Server that is hosting SharePoint Farm databases.
• SQL alias is used, the alias can’t be ‘translated’ to <SQLServerName><InstanceName>
• SQL alias can be translated to <SQLServerName><InstanceName> but SQL Browser on the SQL Server side can’t redirect that string to the port used by that SQL named instance
• SharePoint 2010 has Search configured and this registry key exists on the SharePoint WFE Server.
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft Data Protection ManagerAgent2.0SharePointSearchEnumerationEnabled
The reason for the error is that SharePoint Search protection for SharePoint 2010 has been deprecated in DPM 2010.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided «AS IS» with no warranties, and confers no rights.-
Marked as answer by
Tuesday, February 26, 2013 3:23 PM
-
Marked as answer by
#c# #asp.net #.net #sqlite #iis
#c# #asp.net #.net #sqlite #iis
Вопрос:
Проблема: я пытаюсь разработать ASP.NET Веб-приложение MVC (.Net Framework 4.7.2), в котором я хочу использовать Microsoft.Data.Sqlite
версию (5.0.2), но когда я запускаю его, происходит сбой моего веб-приложения (как в debug IIS Express, так и в app.publish на локальном IIS в Windows 10) в следующей строке кода:
SqliteConnection dbConn = new SqliteConnection("Data Source=test.db");
Генерируется исключение, указанное в:
System.TypeInitializationException
HResult=0x80131534
Message=The type initializer for 'Microsoft.Data.Sqlite.SqliteConnection' threw an exception.
Source=Microsoft.Data.Sqlite
StackTrace:
at Microsoft.Data.Sqlite.SqliteConnection..ctor(String connectionString)
at sqliteTest.Controllers.ValuesController.Get() in C:UsersFaqeerHussainsourcerepossqliteTestsqliteTestControllersValuesController.cs:line 16
at System.Web.Http.Controllers.ReflectedHttpActionDescriptor.ActionExecutor.<>c__DisplayClass6_2.<GetExecutor>b__2(Object instance, Object[] methodParameters)
at System.Web.Http.Controllers.ReflectedHttpActionDescriptor.ActionExecutor.Execute(Object instance, Object[] arguments)
at System.Web.Http.Controllers.ReflectedHttpActionDescriptor.ExecuteAsync(HttpControllerContext controllerContext, IDictionary`2 arguments, CancellationToken cancellationToken)
This exception was originally thrown at this call stack:
[External Code]
Inner Exception 1:
TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception 2:
Exception: Library e_sqlite3 not found
Что я пробовал до сих пор:
После Inner Exception: Library e_sqlite3 not found
этого я попытался просмотреть папку «bin» и обнаружил, что e_sqlite3.dll уже есть в binruntimeswin-x64native
, а также в binruntimeswin-x86native
папках, обе содержат e_sqlite3.dll .
Пробовал копировать вручную вышеупомянутые x86 / x64 e_sqlite3.dll в корневую bin
папку, но ошибка по-прежнему остается.
Что я должен сделать, чтобы начать Microsoft.Data.Sqlite
работать в моем ASP.NET Веб-приложение MVC (.NET Framework 4.7.2)?
Ответ №1:
Это связано с тем, что пакет Microsoft.Data.Sqlite несовместим с версией .Net Framework. Вы можете попробовать изменить версию NuGet Microsoft.Data.Sqlite на 2.2.0 для нормальной работы.
Ответ №2:
Я обнаружил, что e_sqlite3.dll находится по адресу runtimeswin-x86nativee_sqlite3.dll . Итак, я создал эти папки и добавил e_sqlite3.dll в собственной папке. После этого это сработало!
Ответ №3:
К сожалению, для всех, кто сталкивается с этой проблемой, это известная проблема, которая еще не исправлена.
В моем случае я ссылался на .NET Standard 2.0
библиотеку, которая использовала Sqlite, из .NET Framework 4.8
проекта. Я просто изменил библиотеку, чтобы она также предназначалась для .NET 4.8 в качестве обходного пути, поскольку она не использовалась ни в одной другой реализации .NET.
Поэтому мне пришлось изменить <TargetFramework>netstandard2.0</TargetFramework>
<TargetFramework>net48</TargetFramework>
в моем проекте Sqlite.
Ответ №4:
Я также работаю над разработкой ASP.NET (.Net Framework 4.7) веб-приложение, в котором я использовал версию Microsoft.Data.Sqlite (5.0.10), но когда я запускаю свое веб-приложение, оно выходит из строя и выдает исключение: библиотека e_sqlite3 не найдена
Мне потребовалось почти полтора дня, чтобы решить эту проблему. В моем случае я удалил библиотеку зависимостей Microsoft.Data.Sqlite и другие, такие как Microsoft.Data.Sqlite.Core, SQLitePCLRaw.bundle_e_sqlite3, SQLitePCLRaw.core, SQLitePCLRaw.lib.e_sqlite3, SQLitePCLRaw.provider.dynamic_cdecl и т. Д. Из папки пакета.
Теперь я добавил новый Microsoft.Data.Sqlite с версией (6.0.0) вместе со своими зависимостями. Мое приложение работает нормально. (Примечание: я использовал эту библиотеку только для чтения базы данных SpatiaLite и для вызова функции SpatiaLite.)