User regist watchdog monitor open device error no such device or address

Зарегистрирован: 01.06.2009
Пользователь #: 79,290
Сообщения: 1701

Зарегистрирован: 08.12.2003
Пользователь #: 12,353
Сообщения: 3309
Откуда: u4

Зарегистрирован: 01.06.2009
Пользователь #: 79,290
Сообщения: 1701

Зарегистрирован: 30.06.2003
Пользователь #: 7,266
Сообщения: 1212

Голоса: 38

Зарегистрирован: 01.06.2009
Пользователь #: 79,290
Сообщения: 1701

Зарегистрирован: 30.06.2003
Пользователь #: 7,266
Сообщения: 1212

Источник

unixforum.org

Форум для пользователей UNIX-подобных систем

• Темы без ответов
• Активные темы
• Поиск
• Статус форума

не понимаю что за ошибка

не понимаю что за ошибка

Сообщение pikh » 14.08.2009 18:34

вот это выдаёт при загрузке системы

не знаю нужно ли, но на всякий случай прилагаю вывод команды /sbin/fdisk -l загрузился с лайф сиди puppy.

Re: не понимаю что за ошибка

Сообщение gr1nd » 14.08.2009 18:51

Re: не понимаю что за ошибка

Сообщение pikh » 14.08.2009 18:56

Re: не понимаю что за ошибка

Сообщение sirocco » 14.08.2009 19:04

Re: не понимаю что за ошибка

Сообщение pikh » 14.08.2009 19:37

Какая система на диске?

Re: не понимаю что за ошибка

Сообщение sirocco » 14.08.2009 19:51

В дистрибутивах с последними ядрами (к которым относится ленни, но не паппи) все жесткие диски — и ИДЕ (PATA) — суть /dev/sdx

Правьте fstab (можете показать текущий).

Re: не понимаю что за ошибка

Сообщение pikh » 14.08.2009 20:06

Re: не понимаю что за ошибка

Сообщение sirocco » 14.08.2009 20:35

Почитал по поводу ленни, стал сомневаться в своих словах по поводу /dev/sdx

Такой fstab создал сам установщик? ИМХО, вот эту строку можно (пока) смело комментировать. И загрузиться бы Вам с ЛайвСВ Дебиана и посмотреть, что он скажет на fdisk -l

Т.е. у Вас три физических диска. Да, монтировать лучше через uuid.

И потом в fstab (пример)

А ещё лучше, если это работает в ленни

монтировать через id.

И потом в fstab (пример)

Re: не понимаю что за ошибка

Сообщение pikh » 15.08.2009 02:59

Re: не понимаю что за ошибка

Сообщение sirocco » 15.08.2009 06:54

Откуда у Вас такой fstab? Установщик создал?

Система когда-то грузилась?
Если да, то после каких действий перестала грузиться?

Попробуйте закомментировать две последние строчки
/dev/sdb1 none swap sw 0 0
/dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0

Re: не понимаю что за ошибка

Сообщение pikh » 15.08.2009 10:47

Откуда у Вас такой fstab? Установщик создал?

Система когда-то грузилась?
Если да, то после каких действий перестала грузиться?

Попробуйте закомментировать две последние строчки
/dev/sdb1 none swap sw 0 0
/dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0

Да, создал установщик, я ни разу этот файл даже не смотрел. Система грузилась и работала.

мои последние действия:

/Desktop. Я сделал вывод, что после установки konqueror`а слетел nautilus. После этого под рутом ничего не делал. Да и вообще ничего не делал (только с браузером работал). Потом выключил на ночь комп, на следующий день включил и. Сразу не стал писать об этом потому, что после всех этих действий комп перезагружался.

Источник

[Решено]Проблема с иксами?

# 10 лет, 6 месяцев назад (отредактировано 10 лет, 6 месяцев назад)

/.xinitrc, autostart, /var/log/.log … — ? Чего-бы ещё такого придумать…
А телепаты всегда в отпуске, по жизни.

Заголовок темы под вопросом, потому что не знаю действительно ли это так.

/.xinitrc
#
# Executed by startx
#
exec ck-launch-session dbus-launch startxfce4
errors.log:
Jul 8 21:06:12 localhost anacron: Can’t find sendmail at /usr/sbin/sendmail, not mailing output
Jul 8 23:02:48 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 8 23:02:48 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 12:06:29 localhost kernel: iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
Jul 9 12:06:30 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 12:06:30 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 12:06:33 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 13:08:37 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 13:08:37 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 15:52:08 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 15:52:08 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 15:52:08 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 15:52:09 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 15:52:09 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 15:52:12 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 15:53:40 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 15:53:40 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 15:53:40 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 15:53:41 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 15:53:41 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 15:53:44 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 15:55:14 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:14 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:15 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:15 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:16 localhost kernel: usb 2-1.1: device not accepting address 3, error -32
Jul 9 15:55:17 localhost kernel: usb 2-1.1: device not accepting address 3, error -32
Jul 9 15:55:17 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:17 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:17 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:18 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 15:55:18 localhost kernel: usb 2-1.1: device not accepting address 6, error -32
Jul 9 15:55:19 localhost kernel: usb 2-1.1: device not accepting address 7, error -32
Jul 9 15:55:19 localhost kernel: hub 2-1:1.0: unable to enumerate USB device on port 1
Jul 9 15:58:40 localhost kernel: iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
Jul 9 15:58:40 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 15:58:40 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 15:58:43 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 16:21:29 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:30 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:30 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:31 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:31 localhost kernel: usb 2-1.1: device not accepting address 3, error -32
Jul 9 16:21:32 localhost kernel: usb 2-1.1: device not accepting address 3, error -32
Jul 9 16:21:32 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:32 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:33 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:33 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 16:21:33 localhost kernel: usb 2-1.1: device not accepting address 6, error -32
Jul 9 16:21:34 localhost kernel: usb 2-1.1: device not accepting address 7, error -32
Jul 9 16:21:34 localhost kernel: hub 2-1:1.0: unable to enumerate USB device on port 1
Jul 9 16:41:11 localhost anacron: Can’t find sendmail at /usr/sbin/sendmail, not mailing output
Jul 9 18:11:59 localhost kernel: iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
Jul 9 18:12:00 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 18:12:00 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 18:12:03 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 18:20:24 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 18:20:24 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 18:20:24 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 18:20:24 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 18:20:24 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 18:20:28 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 18:21:19 localhost login: pam_tally(login:auth): pam_get_uid; no such user
Jul 9 18:30:48 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 18:30:48 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 18:30:48 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 18:30:48 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 18:30:48 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 18:30:52 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 18:32:40 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 18:32:40 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 18:32:40 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 18:32:41 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 18:32:41 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 18:32:44 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 18:35:43 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 18:35:43 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 18:35:43 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 18:35:44 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 18:35:44 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 18:35:47 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 18:38:31 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 18:38:31 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 18:38:31 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 18:38:32 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 18:38:32 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 18:38:36 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 19:18:28 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:18:28 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:18:29 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:18:29 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:18:29 localhost kernel: usb 2-1.1: device not accepting address 6, error -32
Jul 9 19:18:30 localhost kernel: usb 2-1.1: device not accepting address 7, error -32
Jul 9 19:18:30 localhost kernel: hub 2-1:1.0: unable to enumerate USB device on port 1
Jul 9 19:21:31 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:31 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:31 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:31 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:32 localhost kernel: usb 2-1.1: device not accepting address 10, error -32
Jul 9 19:21:33 localhost kernel: usb 2-1.1: device not accepting address 11, error -32
Jul 9 19:21:33 localhost kernel: hub 2-1:1.0: unable to enumerate USB device on port 1
Jul 9 19:21:39 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:40 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:40 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:40 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:41 localhost kernel: usb 2-1.1: device not accepting address 14, error -32
Jul 9 19:21:41 localhost kernel: usb 2-1.1: device not accepting address 15, error -32
Jul 9 19:21:41 localhost kernel: hub 2-1:1.0: unable to enumerate USB device on port 1
Jul 9 19:21:51 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:51 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:52 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:52 localhost kernel: usb 2-1.1: device descriptor read/64, error -32
Jul 9 19:21:52 localhost kernel: usb 2-1.1: device not accepting address 18, error -32
Jul 9 19:21:53 localhost kernel: usb 2-1.1: device not accepting address 19, error -32
Jul 9 19:21:53 localhost kernel: hub 2-1:1.0: unable to enumerate USB device on port 1
Jul 9 22:26:45 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 9 22:26:45 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 9 22:26:45 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 9 22:26:46 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 22:26:46 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 22:26:50 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 9 22:39:51 localhost kernel: iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
Jul 9 22:39:52 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 9 22:39:52 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 9 22:39:54 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 10 10:18:56 localhost kernel: iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
Jul 10 10:18:56 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 10 10:18:56 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 10 10:19:00 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 10 11:19:21 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 10 11:19:21 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 10 11:19:21 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 10 11:19:22 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 10 11:19:22 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 10 11:19:26 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 10 15:30:05 localhost kernel: iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
Jul 10 15:30:05 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 10 15:30:05 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 10 15:30:08 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 10 22:37:16 localhost kernel: watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
Jul 10 22:37:16 localhost kernel: watchdog: error registering /dev/watchdog (err=-16)
Jul 10 22:37:16 localhost kernel: mei 0000:00:16.0: unable to register watchdog device.
Jul 10 22:37:16 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 10 22:37:16 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 10 22:37:20 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога
Jul 10 23:01:34 localhost kernel: iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
Jul 10 23:01:34 localhost slim: PAM unable to dlopen(/usr/lib/security/pam_systemd.so): /usr/lib/security/pam_systemd.so: cannot open shared object file: No such file or directory
Jul 10 23:01:34 localhost slim: PAM adding faulty module: /usr/lib/security/pam_systemd.so
Jul 10 23:01:37 localhost /usr/sbin/crond: (CRON) INFO (Syslog will be used instead of sendmail.): Нет такого файла или каталога

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.32-1-lts x86_64
Current Operating System: Linux arch 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012 x86_64
Kernel command line: root=/dev/sda2 ro
Build Date: 30 May 2012 07:24:13PM

Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Tue Jul 10 23:01:35 2012
(==) Using config directory: “/etc/X11/xorg.conf.d”
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |–>Screen “Default Screen Section” (0)
(**) | |–>Monitor “ ”
(==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory “/usr/share/fonts/OTF/” does not exist.
Entry deleted from font path.
(WW) `fonts.dir’ not found (or not valid) in “/usr/share/fonts/100dpi/”.
Entry deleted from font path.
(Run ‘mkfontdir’ on “/usr/share/fonts/100dpi/”).
(WW) `fonts.dir’ not found (or not valid) in “/usr/share/fonts/75dpi/”.
Entry deleted from font path.
(Run ‘mkfontdir’ on “/usr/share/fonts/75dpi/”).
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
(==) ModulePath set to “/usr/lib/xorg/modules”
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c58e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 12.0
X.Org XInput driver : 16.0
X.Org Server Extension : 6.0
(–) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 6.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension RECORD
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.2.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: “intel”
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 2.19.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 12.0
(II) LoadModule: “vesa”
(WW) Warning, couldn’t open module vesa
(II) UnloadModule: “vesa”
(II) Unloading vesa
(EE) Failed to load module “vesa” (module does not exist, 0)
(II) LoadModule: “fbdev”
(WW) Warning, couldn’t open module fbdev
(II) UnloadModule: “fbdev”
(II) Unloading fbdev
(EE) Failed to load module “fbdev” (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
(++) using VT number 7

drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
“Default Screen Section” for depth/fbbpp 24/32
(==) intel(0): Depth 24, (–) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
(–) intel(0): Chipset: “Arrandale”
(**) intel(0): Relaxed fencing enabled
(**) intel(0): Wait on SwapBuffers? enabled
(**) intel(0): Triple buffering? enabled
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): 3D buffers tiled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output HDMI3 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LEN Model: 4035 Serial#: 0
(II) intel(0): Year: 2009 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size : horiz.: 30 vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.574 redY: 0.349 greenX: 0.335 greenY: 0.542
(II) intel(0): blueX: 0.156 blueY: 0.136 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer’s mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 69.3 MHz Image Size: 304 x 190 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1404 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 822 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 57.7 MHz Image Size: 304 x 190 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1404 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 822 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): LP141WX5-TLP3
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0030ae354000000000
(II) intel(0): 00130103801e1378ea1f359359558a28
(II) intel(0): 22505400000001010101010101010101
(II) intel(0): 010101010101121b007c502016303020
(II) intel(0): 360030be100000188a16007c50201630
(II) intel(0): 3020360030be100000180000000f0081
(II) intel(0): 0a32810a2816090030e40502000000fe
(II) intel(0): 004c503134315758352d544c503300e6
(II) intel(0): EDID vendor “LEN”, prod id 16437
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline “1280×800”x0.0 69.30 1280 1328 1360 1404 800 803 809 822 -hsync -vsync (49.4 kHz eP)
(II) intel(0): Modeline “1280×800”x0.0 57.70 1280 1328 1360 1404 800 803 809 822 -hsync -vsync (41.1 kHz e)
(II) intel(0): Not using default mode “320×240” (doublescan mode not supported)
(II) intel(0): Not using default mode “400×300” (doublescan mode not supported)
(II) intel(0): Not using default mode “400×300” (doublescan mode not supported)
(II) intel(0): Not using default mode “512×384” (doublescan mode not supported)
(II) intel(0): Not using default mode “640×480” (doublescan mode not supported)
(II) intel(0): Not using default mode “640×512” (doublescan mode not supported)
(II) intel(0): Not using default mode “800×600” (doublescan mode not supported)
(II) intel(0): Not using default mode “896×672” (doublescan mode not supported)
(II) intel(0): Not using default mode “928×696” (doublescan mode not supported)
(II) intel(0): Not using default mode “960×720” (doublescan mode not supported)
(II) intel(0): Not using default mode “700×525” (doublescan mode not supported)
(II) intel(0): Not using default mode “1024×768” (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline “1280×800”x60.0 69.30 1280 1328 1360 1404 800 803 809 822 -hsync -vsync (49.4 kHz eP)
(II) intel(0): Modeline “1280×800”x50.0 57.70 1280 1328 1360 1404 800 803 809 822 -hsync -vsync (41.1 kHz e)
(II) intel(0): Modeline “1024×768”x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
(II) intel(0): Modeline “800×600”x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
(II) intel(0): Modeline “800×600”x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
(II) intel(0): Modeline “640×480”x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output HDMI2
(II) intel(0): EDID for output HDMI3
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output DP3
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output HDMI3 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280×800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (300, 190) mm
(**) intel(0): DPI set to (108, 106)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module “dri2”
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor=“X.Org Foundation”
compiled for 1.12.2, module version = 1.2.0
ABI class: X.Org Server Extension, version 6.0
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Setup complete
(II) intel(0): DRI driver: i965
(II) intel(0): Allocated new frame buffer 1280×800 stride 5120, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: “enabled”
(–) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE

Минуточку. я не использовал никогда xfce, но что делает slim в системе? (/var/log/errors.log)
Ну и ещё вопрос: как там с чтением вики на эту тему?

А он разве что-то ещё может делать, кроме выполнения своей основной функции?

Я бы для начала попробовал создать второго юзера. Если и у него такие косяки будут — проблема системная, если нет — косяк в каком-то юзерском конфиге. Может на него бэд-блок пришелся, может место кончилось и чего-то побилось…

Насчёт вики — сложно сказать. По идее, отвалиться могла только авторизация (монтирование винтов, выключение, перезагрузка). Или xfce не запустилась бы вообще. Кстати, а tint2 как запускается? Через автозапуск xfce?

Захожу в консоль (Alt+Ctrl+F2), login затем startx

Источник

Adblock
detector

Зарегистрирован: 30.06.2003
Пользователь #: 7,266
Сообщения: 1212

Источник

User regist watchdog monitor open device error no such device or address

Specifications and Environmental Indices of the ZXHN F670

Net dimensions: 220 mm (W) x 315 mm (H) x 35 mm (D)
Net weight: 0.63kg
Typical Power consumption: 12.5 W
Noise: Null
Heat dissipation mode: Natural heat dissipation
Power supply: Rated 12 V DC (through the external AC/DC adapter)
Mounting: the desktop or on the wall
Operating environment: 0℃–40℃
Relative humidity: 5%–95%
Atmospheric pressure: 70–106 kPa
MTTR: 30 minutes

GPON Interface Indices of the ZXHN F670

Connector type: SC/APC
Number of PON: 1
Fiber type: Single-mode fiber
Wavelength: Transmitting end: 1310 nm (PON interface)
Receiving end: 1490 nm (PON interface)
Compliance standard of the PON interface: ITU-T 984.x
Receiving rate of the optical interface: 2.488 Gbps
Transmitting rate of the optical interface: 1.244 Gbps
Transmission wavelength range: 1290–1330 nm
Root-mean-square spectral width of the transmitting end: 10 dB
Receive range: 1480–1500nm
Receive sensitivity: -28 dBm
Saturation optical power of the receiver: -8 dBm
Optical link length: 20 km

Key Technical Indices of the ZXHN F670

В теме нет куратора. По вопросам наполнения шапки обращайтесь к пользователю DertreD через QMS или к модераторам раздела.

Сообщение отредактировал M|A|G — 11.11.21, 13:42

Источник

unixforum.org

Форум для пользователей UNIX-подобных систем

• Темы без ответов
• Активные темы
• Поиск
• Статус форума

не понимаю что за ошибка

не понимаю что за ошибка

Сообщение pikh » 14.08.2009 18:34

вот это выдаёт при загрузке системы

не знаю нужно ли, но на всякий случай прилагаю вывод команды /sbin/fdisk -l загрузился с лайф сиди puppy.

Re: не понимаю что за ошибка

Сообщение gr1nd » 14.08.2009 18:51

Re: не понимаю что за ошибка

Сообщение pikh » 14.08.2009 18:56

Re: не понимаю что за ошибка

Сообщение sirocco » 14.08.2009 19:04

Re: не понимаю что за ошибка

Сообщение pikh » 14.08.2009 19:37

Какая система на диске?

Re: не понимаю что за ошибка

Сообщение sirocco » 14.08.2009 19:51

В дистрибутивах с последними ядрами (к которым относится ленни, но не паппи) все жесткие диски — и ИДЕ (PATA) — суть /dev/sdx

Правьте fstab (можете показать текущий).

Re: не понимаю что за ошибка

Сообщение pikh » 14.08.2009 20:06

Re: не понимаю что за ошибка

Сообщение sirocco » 14.08.2009 20:35

Почитал по поводу ленни, стал сомневаться в своих словах по поводу /dev/sdx

Такой fstab создал сам установщик? ИМХО, вот эту строку можно (пока) смело комментировать. И загрузиться бы Вам с ЛайвСВ Дебиана и посмотреть, что он скажет на fdisk -l

Т.е. у Вас три физических диска. Да, монтировать лучше через uuid.

И потом в fstab (пример)

А ещё лучше, если это работает в ленни

монтировать через id.

И потом в fstab (пример)

Re: не понимаю что за ошибка

Сообщение pikh » 15.08.2009 02:59

Re: не понимаю что за ошибка

Сообщение sirocco » 15.08.2009 06:54

Откуда у Вас такой fstab? Установщик создал?

Система когда-то грузилась?
Если да, то после каких действий перестала грузиться?

Попробуйте закомментировать две последние строчки
/dev/sdb1 none swap sw 0 0
/dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0

Re: не понимаю что за ошибка

Сообщение pikh » 15.08.2009 10:47

Откуда у Вас такой fstab? Установщик создал?

Система когда-то грузилась?
Если да, то после каких действий перестала грузиться?

Попробуйте закомментировать две последние строчки
/dev/sdb1 none swap sw 0 0
/dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0

Да, создал установщик, я ни разу этот файл даже не смотрел. Система грузилась и работала.

мои последние действия:

/Desktop. Я сделал вывод, что после установки konqueror`а слетел nautilus. После этого под рутом ничего не делал. Да и вообще ничего не делал (только с браузером работал). Потом выключил на ночь комп, на следующий день включил и. Сразу не стал писать об этом потому, что после всех этих действий комп перезагружался.

Источник

Adblock
detector

не понимаю что за ошибка

Модераторы: Warderer, Модераторы разделов

 /dev/sda1:open failed: no such device or address
 setting preliminary keymap...done
 Activating swap...failed.
 Checking root file system...fsck 1.41.8 (20-jyl-2009)debian:clean, 160315/960992 files, 1151871/3837526 blocks done.
 Cleaning up ifupdown...
 Loading kernel modules...done.
 Checking filesystems...fsck 1.41.8 (20-jyl-2009)fsck.ext3:no such device or addres wile trying to open /dev/sda1
 Possibly non-existent or swap device?
 fsck died with exit status 8
 failed(code 8)
 File system chek failed. A log is being saved in /var/log/fsck/checkfs ifthat location is writable. Please repair the file sistem manualle...failed!
 A maintenance shell will now be started. CONTROL-D will terminate ths shell and resume system boot...(warning).
 Give root password for maintenance
 (or type Control-D to continue):

 Log of fsck -C -R -A -a
 Thu Aug 13 20:19:11 2009

 fsck 1.41.8 (20-Jul-2009)
 fsck.ext3: No such device or address while trying to open /dev/sda1
 Possibly non-existent or swap device?
 fsck died with exit status 8

 Thu Aug 13 20:19:11 2009
 ----------------

# /sbin/fdisk -l

 Disk /dev/hdb: 20.0 GB, 20020396032 bytes
 255 heads, 63 sectors/track, 2434 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot      Start         End      Blocks   Id  System
 /dev/hdb1               1         523     4200966   82  Linux swap
 /dev/hdb2   *         524        2434    15350107+  83  Linux

 Disk /dev/sda: 160.0 GB, 160040803840 bytes
 255 heads, 63 sectors/track, 19457 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot      Start         End      Blocks   Id  System
 /dev/sda1               1       19457   156288321   83  Linux

 Disk /dev/sdb: 4311 MB, 4311982080 bytes
 255 heads, 63 sectors/track, 524 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot      Start         End      Blocks   Id  System
 /dev/sdb1               1         524     4208998+  82  Linux swap

# /etc/fstab: static file system information.
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>

 proc    /proc    proc    defaults    0    0
 /dev/hdb2    /    ext3    errors=remount-ro    0    1
 /dev/sda1    /home    ext3    defaults    0    2
 /dev/hdb1    none    swap    sw    0    0
 /dev/sdb1    none    swap    sw    0    0
 /dev/hda    /media/cdrom0    udf,iso9660    user,noauto    0    0

/dev/disk/by-uuid/xxxxxxxxx /home ext3 defaults 0 1

/dev/disk/by-id/ata-Hitachi_HDxxxxxx_GExxxxxxA-part3 /home ext3 defaults 0 1

user@debian:~$ sudo fdisk -l

       Disk /dev/sda: 160.0 GB, 160040803840 bytes
       255 heads, 63 sectors/track, 19457 cylinders
       Units = cylinders of 16065 * 512 = 8225280 bytes
       Disk identifier: 0x006a006a

          Device Boot      Start         End      Blocks   Id  System
       /dev/sda1               1       19457   156288321   83  Linux

       Disk /dev/hdb: 20.0 GB, 20020396032 bytes
       255 heads, 63 sectors/track, 2434 cylinders
       Units = cylinders of 16065 * 512 = 8225280 bytes
       Disk identifier: 0x5ddaf6c3

          Device Boot      Start         End      Blocks   Id  System
       /dev/hdb1               1         523     4200966   82  Linux swap / Solaris
       /dev/hdb2   *         524        2434    15350107+  83  Linux
       user@debian:~$

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
     Option         "XkbRules" "xorg"
     Option         "XkbModel" "pc104"
     Option         "XkbLayout" "us,ru(winkeys)"
     Option      "XkbOptions" "grp:caps_toggle,grp_led:scroll"
EndSection

< Back to Support Search

For questions or concerns with the SUSE Knowledgebase please contact: tidfeedback[at]suse.com

hi team,

this morning we’ve been attacked again, at around 2:50am local time. below is snippets of syslog when router is booting. (after it was attacked)
it was rebooting by itself. and as before, after that aimesh, wifi 2.4g and several pages in admin, all are inaccessible.
log has «kernel: external imprecise data…….» which is unusual.

updates:
after, unplug the power for a couple of minutes and plug it back. the router is back to normal.
no need for hard reset… phew…
aiprotection shows nothing, at that time.

updates: 27/03/2018
there are many hits from aiprotection today, but so far my router is doing ok, i think.
i have big suspicious on error messages re: letsencrypt.org called by kernel every 5 minutes or so.
in doing so, router’s CPU spiked to 100% for a couple of seconds.
these errors has been there since the 1st attack, has my router been compromised? there wasn’t any errors like this before the 1st attack.

below is snippets of error log on «letsencrypt.org», i have replace my DNS name to XXXXX.asuscomm.com for privacy.

…..
Mar 27 10:55:38 kernel: /usr/sbin/acme-client: https://acme-v01.api.letsencrypt.org…Nk/3977139698: bad response
Mar 27 10:55:38 kernel: /usr/sbin/acme-client: transfer buffer: [{ «type»: «http-01», «status»: «invalid», «error»: { «type»: «urn:acme:error:connection», «detail»: «Fetching http://XXXXXXXXXXX.asuscomm.com/.wel…GZIh_G2uKiG1E: Timeout», «status»: 400 }, «uri»: «https://acme-v01.api.letsencrypt.org/acme/challenge/UhiBnOpDX2_qCE4YVMXuaYenSvIFZeVi_7jN9sbOGNk/3977139698», «token»: «Hi2YylcKbIjivb4GTNC4PZekG-ptOkGZIh_G2uKiG1E», «keyAuthorization»: «Hi2YylcKbI
Mar 27 11:00:01 rc_service: service 19773:notify_rc restart_letsencrypt
Mar 27 11:00:09 kernel: /usr/sbin/acme-client: https://acme-v01.api.letsencrypt.org/acme/new-authz: bad HTTP: 429
Mar 27 11:00:09 kernel: /usr/sbin/acme-client: transfer buffer: [{ «type»: «urn:acme:error:rateLimited», «detail»: «Error creating new authz :: too many failed authorizations recently: see https://letsencrypt.org/docs/rate-limits/», «status»: 429 }] (189 bytes)
Mar 27 11:03:51 lldpd[450]: unable to send packet on real device for wds1.3: No such device or address
….

also my aimesh node is just 1 rt-ac68u. firmware has been updated to 3.0.0.4.384_20624-g14d2f02
main router rt-ac88u firmware is 3.0.0.4.384_20379-gc0714df

===martin

…
Feb 14 07:00:21 syslogd started: BusyBox v1.17.4
Feb 14 07:00:21 kernel: klogd started: BusyBox v1.17.4 (2018-02-07 19:40:02 CST)
Feb 14 07:00:21 kernel: PCI: Fixing up bus 0
Feb 14 07:00:21 kernel: PCI: Fixing up bus 0
Feb 14 07:00:21 kernel: PCI: Fixing up bus 1
Feb 14 07:00:21 kernel: PCI: Fixing up bus 0
Feb 14 07:00:21 kernel: PCI: Fixing up bus 1
Feb 14 07:00:21 kernel: VFS: Disk quotas dquot_6.5.2
Feb 14 07:00:21 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 14 07:00:21 kernel: pflash: found no supported devices
Feb 14 07:00:21 kernel: bcmsflash: found no supported devices
Feb 14 07:00:21 kernel: Boot partition size = 524288(0x80000)
Feb 14 07:00:21 kernel: lookup_nflash_rootfs_offset: offset = 0x200000
Feb 14 07:00:21 kernel: nflash: squash filesystem with lzma found at block 29
Feb 14 07:00:21 kernel: Creating 4 MTD partitions on «nflash»:
Feb 14 07:00:21 kernel: 0x000000000000-0x000000080000 : «boot»
Feb 14 07:00:21 kernel: 0x000000080000-0x000000200000 : «nvram»
Feb 14 07:00:21 kernel: 0x000000200000-0x000004000000 : «linux»
Feb 14 07:00:21 kernel: 0x0000003bfed0-0x000004000000 : «rootfs»
Feb 14 07:00:21 kernel: === PPTP init ===
Feb 14 07:00:22 kernel: Registering the dns_resolver key type
Feb 14 07:00:22 kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Feb 14 07:00:22 kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Feb 14 07:00:22 kernel: Available 7 bytes at (off,len):
Feb 14 07:00:22 kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
Feb 14 07:00:22 kernel: Options: NO_AUTOINCR,NO_READRDY,
Feb 14 07:00:22 kernel: Creating 1 MTD partitions on «brcmnand»:
Feb 14 07:00:22 kernel: 0x000004000000-0x000008000000 : «brcmnand»
Feb 14 07:00:22 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Feb 14 07:00:22 kernel: rtl8365mb: module license ‘Proprietary’ taints kernel.
Feb 14 07:00:22 kernel: Disabling lock debugging due to kernel taint
Feb 14 07:00:22 kernel: rtl8365mbrtl8365mb initialized(0)(retry:1)
Feb 14 07:00:22 kernel: rtk port_phyEnableAll ok
Feb 14 07:00:22 kernel: register rtl8365mb done (link down at first)
Feb 14 07:00:22 kernel: et_module_init: passivemode set to 0x0
Feb 14 07:00:22 kernel: et_module_init: txworkq set to 0x0
Feb 14 07:00:22 kernel: et_module_init: et_txq_thresh set to 0xce4
Feb 14 07:00:22 kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Feb 14 07:00:22 kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Feb 14 07:00:22 kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Feb 14 07:00:22 kernel: ERROR fwder_init: fwd_cpumap nvram not present, using default
Feb 14 07:00:22 kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.164.303 (r666427)
Feb 14 07:00:22 kernel: dpsta_init: msglevel set to 0x1
Feb 14 07:00:22 kernel: dpsta_init: fail to get ifnames!
Feb 14 07:00:22 nat: apply redirect rules
Feb 14 07:00:22 kernel: PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
Feb 14 07:00:22 kernel: PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
Feb 14 07:00:22 kernel: dhd_attach(): thread:dhd_watchdog_thread:7a started
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x803211a0 lr=0x7f095360 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x803211ac lr=0x7f0953a0 ignored.
Feb 14 07:00:22 kernel: dhd_detach(): thread:dhd_watchdog_thread:7a terminated OK
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x803211a0 lr=0x7f09cab4 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa3000000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x803211a0 lr=0x7f09d9a0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x803211ac lr=0x7f09bf50 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x803211ac lr=0x7f09c9e4 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fea4 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe88 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: External imprecise Data abort at addr=0xa0c00000, fsr=0x1406, pc=0x8020fe84 lr=0x8020fee0 ignored.
Feb 14 07:00:22 kernel: PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
Feb 14 07:00:22 kernel: PCI: Enabling device 0002:01:00.0 (0140 -> 0142)
Feb 14 07:00:22 kernel: dhd_attach(): thread:dhd_watchdog_thread:7e started
Feb 14 07:00:22 kernel: Dongle Host Driver, version 1.363.2 (r665954)
Feb 14 07:00:22 kernel: Compiled in drivers/net/wireless/bcmdhd on Feb 7 2018 at 19:46:10
Feb 14 07:00:22 kernel: Register interface [eth2] MAC: 38:d5:47:bc:13:3c
Feb 14 07:00:22 kernel: xhci_hcd 0000:00:0c.0: Failed to enable MSI-X
Feb 14 07:00:22 kernel: xhci_hcd 0000:00:0c.0: failed to allocate MSI entry
Feb 14 07:00:22 kernel: usb usb1: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
Feb 14 07:00:23 dnsmasq[335]: warning: no upstream servers configured
Feb 14 07:00:23 kernel: rtk port_phyEnableAll (on) ok
Feb 14 07:00:24 RT-AC88U: start httpd
Feb 14 07:00:24 syslog: Generating SSL certificate…
Feb 14 07:00:24 NAT Tunnel: AAE Service is stopped
Feb 14 07:00:24 disk monitor: be idle
Feb 14 07:00:24 AAE: AAE Service is started
Feb 14 07:00:24 jffs2: valid logs(1)
Feb 14 07:00:24 hour monitor: daemon is starting
Feb 14 07:00:24 Mastiff: exit.
Feb 14 07:00:25 lldpd[424]: cannot get ethtool link information with GSET (requires 2.6.19+): Operation not permitted
Feb 14 07:00:27 wan: [wan0_hwaddr] == [385:47:BC:13:38]
Feb 14 07:00:27 WAN Connection: ISP’s DHCP did not function properly.
Feb 14 07:00:27 wan: [deconfig] udhcpc done[286]
Feb 14 07:00:27 rc_service: udhcpc 442:notify_rc start_firewall
Feb 14 07:00:27 wan: finish adding multi routes
Feb 14 07:00:27 rc_service: udhcpc 442:notify_rc stop_upnp
Feb 14 07:00:27 rc_service: waitting «start_firewall» via udhcpc …
Feb 14 07:00:30 syslog: module ledtrig-usbdev not found in modules.dep
Feb 14 07:00:30 syslog: module leds-usb not found in modules.dep
Feb 14 07:00:30 kernel: SCSI subsystem initialized
Feb 14 07:00:32 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
Feb 14 07:00:32 kernel: nf_conntrack_rtsp v0.6.21 loading
Feb 14 07:00:32 kernel: nf_nat_rtsp v0.6.21 loading
Feb 14 07:00:33 WAN Connection: WAN was restored.
Feb 14 07:00:33 rc_service: udhcpc 442:notify_rc start_upnp
Feb 14 07:00:33 rc_service: waitting «stop_upnp» via udhcpc …
Feb 14 07:00:33 ntp: start NTP update
Mar 26 02:54:15 rc_service: ntp 459:notify_rc restart_upnp
….