Usr bin sudo input output error

Модератор: Bizdelnick

1. bash /usr/bin/sudo input/output error
   

   Hello fellow Linuxers!

   The title message is one I receive at a certain point during my Ubuntu Studio Xfce session, troubles of which began fairly recently. These troubles incluce the desktop freezing, when I try to press buttons in my panels they simply lagg for a moment and disappear, and then reappears….., in the console I get this message:

   Code:

    console: XIO: fatal IO error 11 (resource temporarily unavailable) on X server ":0" after 7 requests (7 known processed) with 0 events remaining

   and on top of this, holding down alt + SysRq/PrtScn for the purposes of typing REISUB results in, as soon as the two are held down simultaneously, my workspaces quickly increase in quantities, lol… I would really appreciate some help here, this is very important..

   Thanks for your time!

   ---

2. Re: bash /usr/bin/sudo input/output error
   

   Hi, when someone is online that sees your thread and has an answer they well help but bumping is only allowed once every 24 hours and please remember that we are all volunteers.
   Thanks

   ---

3. Re: bash /usr/bin/sudo input/output error
   

   Hi, I did a quick google search of the error message and here is a link so you can look at them too.
   https://www.google.com/search?client…utf-8&oe=utf-8
   Thanks

   ---

4. Re: bash /usr/bin/sudo input/output error
   

   Well, that much research I have done… And my apologies.. Thanks

   ---

5. Re: bash /usr/bin/sudo input/output error
   

   Hi, I am sorry that I do not know the answer.

   ---

6. Re: bash /usr/bin/sudo input/output error
   

   bump is due

   ---

7. Re: bash /usr/bin/sudo input/output error
   

   I received this error while closing out after running «glxgears» using the (X). Would not close using ctrl-C. I have a problem booting into LM13 Maya. I can only get into recovery mode from there does normal boot and runs good. I have a post In the Mint Forums,http://forums.linuxmint.com/viewtopi…05020&p=593844
   and nobody seems to know what is causing my problem, maybe Xserver? I’m completely new to Linux so I am at a loss right now. I have LM113 Cinnamon on my desktop and it runs great. My laptop is giving me the problems withLM13 Maya. Any ideas or fixes?

   ---

8. Re: bash /usr/bin/sudo input/output error
   

   This has been solved, but I can’t mark it as solved. There is no option in this threads drop down menu for solved.

   ---

9. Re: bash /usr/bin/sudo input/output error
   

   Originally Posted by rickm1945
   

   This has been solved, but I can’t mark it as solved.

   That’s because it’s LeoTB’s thread, not yours.

   ---

unixforum.org

Форум для пользователей UNIX-подобных систем

• Темы без ответов
• Активные темы
• Поиск
• Статус форума

input/output error

Модератор: Bizdelnick

input/output error

Сообщение Ellen » 21.03.2009 11:10

Заранее прошу прощения, если эта тема уже обсуждалась. В таком случае прошу ссылку на топик.

Я работаю в Линукс Минт. С недавнего времени при попытке загрузить что-либо под рут мне выдается ошибка ввода-вывода. Причем запрос пароля для рут даже не появляется. Сразу Failed run as user root input/output error. Гномовская консоль пишет, что не может найти команду судо. Alt+Shift+F1 не работает.

Re: input/output error

Сообщение agentprog » 21.03.2009 11:18

Re: input/output error

Сообщение Ellen » 21.03.2009 11:23

действительно, имела ввиду, что именно ctrl+alt+F* не работает. /usr/bin/sudo уже пробовала. та же ошибка ввода-вывода.

Re: input/output error

Сообщение agentprog » 21.03.2009 11:33

Re: input/output error

Сообщение Ellen » 21.03.2009 11:36

Re: input/output error

Сообщение agentprog » 21.03.2009 11:55

Re: input/output error

Сообщение Ellen » 21.03.2009 11:59

Re: input/output error

Сообщение agentprog » 21.03.2009 12:10

Re: input/output error

Сообщение AlexFilth » 21.03.2009 12:13

Re: input/output error

Сообщение Ellen » 21.03.2009 12:15

[ 7204.326313] operapluginwrap[13383]: segfault at 0 ip 00000000 sp bfc332cc error 4 in operapluginwrapper[8048000+22000]
[ 7375.928968] operapluginwrap[13509]: segfault at 0 ip 00000000 sp bfdfac9c error 4 in operapluginwrapper[8048000+22000]
[ 7391.828521] operapluginwrap[13525]: segfault at 0 ip 00000000 sp bfe14cac error 4 in operapluginwrapper[8048000+22000]
[ 7423.908615] operapluginwrap[13563]: segfault at 0 ip 00000000 sp bff7be1c error 4 in operapluginwrapper[8048000+22000]
[ 7469.781298] operapluginwrap[13611]: segfault at 0 ip 00000000 sp bf98101c error 4 in operapluginwrapper[8048000+22000]
[ 7474.776890] operapluginwrap[13620]: segfault at 0 ip 00000000 sp bfb329cc error 4 in operapluginwrapper[8048000+22000]
[ 7540.270923] operapluginwrap[13686]: segfault at 0 ip 00000000 sp bfa4d0ec error 4 in operapluginwrapper[8048000+22000]
[ 7547.900128] operapluginwrap[13695]: segfault at 0 ip 00000000 sp bfdc545c error 4 in operapluginwrapper[8048000+22000]
[ 7626.948360] operapluginwrap[13790]: segfault at 0 ip 00000000 sp bfc8531c error 4 in operapluginwrapper[8048000+22000]
[ 7806.505606] operapluginwrap[13989]: segfault at 0 ip 00000000 sp bfc272cc error 4 in operapluginwrapper[8048000+22000]

вот такая ерунда

Источник

Thread: bash: /usr/bin/sudo: Input/output error

Thread Tools

Search Thread

Display

bash: /usr/bin/sudo: Input/output error

I get the following when trying to su —

knoppix@ttyp1[knoppix]$ su —
bash: /usr/bin/sudo: Input/output error
knoppix@ttyp1[knoppix]$ su —
bash: /usr/bin/sudo: Input/output error

Never seen it b4. Cheers.

restarted and got this when opening the terminal,

bash: /usr/bin/tty: Input/output error
bash: /usr/bin/tty: Input/output error
[knoppix]knoppix su —
bash: /usr/bin/sudo: Input/output error

Anyone seen this b4. Been using this CD for almost 4mths. 1st time for this. Cheers.

Just off the top of my head, you may have one of 3 scenarios.

1) You’ve been hacked

2) Your HD is going bad

3) Something happened to /dev or /usr/bin/sudo

o Boot from the Knoppix CD

o ‘ time badblocks -c 128 -s -v /dev/hda ‘ or whatever disk you use.

o Backup any important files.

o Prepare to restore from backup (YOU DO have backups, right??) or reinstall. Depending on badblocks, you might have to buy another HD, but nothing is certain yet.

—Keep in touch, lemme know how it goes.

restarted and got this when opening the terminal,

bash: /usr/bin/tty: Input/output error
bash: /usr/bin/tty: Input/output error
[knoppix]knoppix su —
bash: /usr/bin/sudo: Input/output error

Anyone seen this b4. Been using this CD for almost 4mths. 1st time for this. Cheers.

Источник

Linux for freshers

Linux Administration, Interview Question, Tips And Tricks

Thursday, October 1, 2020

Input/Output Error How to Reboot or shutdown the Linux server?

Input/Output Error : Bad Blocks — How to Reboot or shutdown the Linux server?

Input/output error while running the command mostly due to it could be bad blocks on the disk.

In this situation, first suggestion would be to check /var/log/messages for any disk-related alerts (might see some sense key alerts).

tail -n 100 /var/log/messages or tail -n 100 /var/log/syslog

tail -f /var/log/messages

bash: /usr/bin/du: Input/output error

Now if try to reboot,it can also give the same output. You can try to init 6.

# reboot or init 6

bash: /sbin/reboot: Input/output error

bash: /sbin/shutdown: Input/output error

If the above reboot commands don’t work try either forced reboot or shutdown

echo «number» >/proc/sys/kernel/sysrq

The number may be written here either as decimal or as hexadecimal with the 0x prefix. CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE must always be written in hexadecimal.

Note that the value of /proc/sys/kernel/sysrq influences only the invocation via a keyboard. Invocation of any operation via /proc/sysrq-trigger is always allowed (by a user with admin privileges).

0 — disable sysrq completely

1 — enable all functions of sysrq

Where b Will immediately reboot the system without syncing or unmounting your disks.

Источник

Linux for freshers

Linux Administration, Interview Question, Tips And Tricks

Thursday, October 1, 2020

Input/Output Error How to Reboot or shutdown the Linux server?

Input/Output Error : Bad Blocks — How to Reboot or shutdown the Linux server?

Input/output error while running the command mostly due to it could be bad blocks on the disk.

In this situation, first suggestion would be to check /var/log/messages for any disk-related alerts (might see some sense key alerts).

tail -n 100 /var/log/messages or tail -n 100 /var/log/syslog

tail -f /var/log/messages

bash: /usr/bin/du: Input/output error

Now if try to reboot,it can also give the same output. You can try to init 6.

# reboot or init 6

bash: /sbin/reboot: Input/output error

bash: /sbin/shutdown: Input/output error

If the above reboot commands don’t work try either forced reboot or shutdown

echo «number» >/proc/sys/kernel/sysrq

The number may be written here either as decimal or as hexadecimal with the 0x prefix. CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE must always be written in hexadecimal.

Note that the value of /proc/sys/kernel/sysrq influences only the invocation via a keyboard. Invocation of any operation via /proc/sysrq-trigger is always allowed (by a user with admin privileges).

0 — disable sysrq completely

1 — enable all functions of sysrq

Where b Will immediately reboot the system without syncing or unmounting your disks.

Источник

[SOLVED] “errno 5 input/output error” fixes

Input/output error is a general error message that happens all the time under different situation. It indicates a problem in filesystem level, more specifically, the operating system cannot access a certain part of the disk drive (or virtual disk drive).

In this article, we will explain the possible reasons why the “errno 5 input/output error” message happens and a few solutions that might help solving it.

“[Errno 5] Input/output error” causes

Before we get into any further, let’s make it clear that the error indicates a problem happens with the disk while the operating system is writing or reading from it. The error is specific to Linux machines.

Sometimes, especially in situation where you’re running Linux as a virtual machine, the cause of “[Errno 5] Input/output error” might be related to the hypervisor. Try updating VMware or VirtualBox to see if the problem goes away.

Windows is currently under heavy development with changes are made every few months, that makes running a virtual machine more complex than ever. On Windows machines, you have to pay attention to Hyper-V to see if it plays nicely with VirtualBox or VMware. If Hyper-V causes the problem, you would have no choice but update VMware or VirtualBox (or reinstall Windows, of course).

“errno 5 input/output error” when trying to install Ubuntu/Debian

The error might look like the image above.

Not only happens on Ubuntu/Debian, the identical error message can also be displayed in Linux Mint (as it is a Ubuntu derivative).

Now there are several things you can try :

• Make sure your CD/DVD or flash drive contents are not corrupted. Usually the only thing you need to do is verifying MD5 hash of the ISO file you’ve downloaded against the official value from Ubuntu/Debian/Linux Mint website.
• Backup the existing disk (the whole HDD, not only the important partition) then delete all of them to reformat the whole disk. Or you could choose “Erase disk and install Ubuntu” to avoid manually deleting partitions.

Test your RAM for defects. You can use MemTest86 to conduct this type of test. If you have a defect RAM, remove or replace it.

Last resort : Replace the HDD to see if the error message goes away.

“errno 5 input/output error” when using Google Colab

Colaboratory, also known as Google Colab, is a product from Google Research, it allows running Python code through the browser, especially suitable for data analysis, machine learning and education. Colab also allows running terminal commands prefix with the exclamation mark.

Sometimes, running terminal commands in Colab returns “”[Errno 5] Input/output error”. Another form of this error is “OSError: [Errno 5] Input/output error” when you try to run Python code that access the filesystem.

Google Drive integration in Colab is handy, but since these are 2 different services running in a cloud of thousands of servers, sometimes it performs not as well as if it is a physical server. If you’re connecting to Google Drive and mounted it to Colab, remember these rules of thumb to avoid input/output error :

• Number of files or subfolders in a folder should not be too large. We recommend keeping them under 50 subfolders/files.
• Try not to perform too many read/write operations to mounted Google Drive folder. Instead of that, write to the virtual environment disk, then move all of them to Google Drive mounted folder. The moving data functionality must have been thoroughly coded and tested before they launch Google Colab.
• Try not to run any snippet of code for too long since it may cause Colab to raise timeout error.
• Try not to move too much data at a short period of time. There are quota set by Google which are not necessary shown while using Colab. Basically, once the limit is passed you get the [Errno 5] Input/output error independent on the file or the operation you were doing.
• When in doubt, move files and folders out of /content/drive before manipulating them might solve your problem.

“OSError: errno 5 input/output error” with Python

It doesn’t really matter that you are using Django, Odoo, PyTorch or low-level libraries like pexpect or shutil, if there’s something wrong while reading/writing data to the disk, “OSError: errno 5 input/output error” might be the first error you will see.

There’s a couple of things you can try, depends on your specific scenario :

• Check the disk for errors. On Windows, you can run chkdsk . On Linux, there is fsck . If there are recoverable errors, they’ll be fixed. After that, your Python program may run without any issue.
• Carefully inspect the permissions of the folder/directory you’re working in. It should include appropriate read/write permission.
• Replace the disk drive to see if the problem goes away. If it does, then your disk drive is faulty.

We hope that the solutions above help you solve your problem and learn something along the way. If you’re new to Linux, you might want to checkout our guide on common error messages such as “ifconfig: command not found” and “cannot stat”. Backing up is important to avoid losing data, too, so we conducted 10+ practical Rclone examples – Rclone tutorial for beginners to get you started quicker.

Источник

Страницы: [1]   Вниз

0 Пользователей и 1 Гость просматривают эту тему.

---

---

---

---

---

---

---

---

---

Страницы: [1]   Вверх

Dell PowerEdge R720 Server | 2x E5-2650 v2 = 16 Cores | 128GB RAM | 4x Trays

$275.99

---

PFSENSE Firewall Server SUPERMICRO 10 CORE E5-2680 V2 2.8GHz 32GB 1TB SSD RAILS

$349.99

---

HP Proliant DL360p G8 Server — 2x 2680V2 2.8GHz 20 Cores — Choose RAM / Drives

$248.00

---

Dell PowerEdge R720 Server | 2x 2670 V2 =20 Cores | 32GB | H710P | 4x 300GB SAS

$211.99

---

HYVE ZEUS V1 1U SERVER 2x 10 CORE E5-2670V2 2.5GHz 32GB RAM RAIL NO HDD

$142.00

---

Dell PowerEdge R720 Server | 2x E5-2680 v2 = 20 Cores | 128GB RAM | 4x 1TB SATA

$280.99

---

Dell PowerEdge R620 Server | 2x E5-2650 V2 2.6GHz =16 Cores | 32GB | 2x trays

$154.99

---

HP Proliant DL360p G8 Server | 2x E5-2680 2.7GHz =16 Cores | 96GB | 2x 300GB SAS

$171.99

---

Dell PowerEdge T130 Intel Xeon E3-1220 v5 8GB RAM 1TB HDD VGA USB Win 10 Server

$309.99

---

Dell PowerEdge R730 Server — 2x E5-2650 v4 2.2Ghz 24 Cores — Choose RAM / Drives

$639.20

---