Установка gapps ошибка 70

Solve TWRP Error 70 while installing GApps. GApps (Google Apps) is the Google core application and usually includes Google Play Store, Gmail, YouTube, Maps, Google+ and Google Drive, etc. If you have some of these apps, you already have GApps installed on your device. These apps are always running in the background under the process of com.google.process.gapps. However, these apps do not come pre-installed with third-party custom ROMs due to restrictions.

To overcome this issue, users often flash GApps externally as flashable zip package files through a custom recovery. But sometimes, while installing these Google apps, users have noticed certain errors like ‘Updater process ended with an error: 70 error installing zip file’ or ‘Error Status 7 Installation aborted’ or ‘zip signature verification failed twrp’. Soon after this error appears in TWRP recovery, the installation process fails.

Open GApps arm 8.0- Mounting /data /system
- Gathering device & ROM information

- Performing system space calculations...

Insufficient storage space calculations in
System partition. You may want to use a
smaller Open GApps package or consider
removing some apps using gapps-config.
See: '/sdcard/Download/open_gapps_log.txt'
for complete details and information.

- Copying Log to /sdcard/Download

- NO changes were made to your device

Installer will now exit...

Error Code: 70
- Unmounting /system

Updater process ended with ERROR: 70
Error installing zip file '/sdcard/open_gapps-arm-8.0-stock-20190221.zip'
Updating partition details...
...done

What is Error 70?

The Updater Process ended with Error: 70 appears in TWRP while flashing GApps (Google Apps). The main reason for this error is the insufficient storage space available in your device system partition.

That means you should free some space from your system partition to install the Open GApps package. Sometimes simply updating TWRP recovery can solve this problem. However, it is a very rare scenario.

Related:

1. How to Fix Blocked by Play Protect Error
2. How to Solve Error Executing Updater Binary In Zip

Along with GApps, even custom ROM like LineageOS, Resurrection Remix, etc., is installed in the system partition. Every Android phone and tablet has a separate, fixed-size system partition.

Moreover, this twrp error code 70 is usually observed in older Android phones with 2GB or less internal storage. Besides, the size of Open GApps increases with every update. Hence it becomes difficult to flash these GApps and avoid the TWRP 70 error.

To solve error 70 in TWRP, you can either flash a smaller GApps package or uninstall certain apps from your device. What if you flash pico GApps and still encounter error code 70?

In this easy steps guide, we’ll manually fix the twrp error code 70 GApps. This tutorial will guide you to solve TWRP error gapps using easy methods. Interested users may proceed to our actual article given below.

How to Fix Error 70 in TWRP while flashing GApps

In this article, we’ll use three methods to Fix Error code 70 while installing Google Apps.

Disclaimer

Proceed at your own risk. We will not be held liable for any damage whatsoever for the same.

Method 1: Resize System Partition

At first, we’ll use the Repair or Change File System option in the TWRP custom recovery.

Steps to Fix TWRP Error 70

• Boot your Android device into TWRP recovery.
• As you enter the TWRP, first create a Nandroid backup of your current ROM.
• From the main menu, select the Wipe option.
• On the next screen, swipe right to start the factory reset process.

• This step will delete all the data present on your phone.
• Hence ensure to back up everything before doing this step.
• Now click on the Install option and flash the custom ROM.
• Again go to the main menu and select the Wipe option.
• Then click on the Advanced Wipe option.

• Tick ONLY System Partition.
• Now click on the Repair or Change File System option.

• On the next screen, select the Resize File System option.
• Swipe right to resize the system partition.
• If the resize system partition process fails, go back and implement the same steps again.
• As soon as it completes, go back and install the GApps package file.

• Finally! This is how you can flash GApps successfully without getting error 70.

Method 2: Flashing Pico GApps

If Method 1 doesn’t work, and you still get Error 70 in TWRP, then follow Method 2 given below.

Steps to Fix TWRP Error 70

• Download the Pico GApps package.
• The Pico variant of Google Apps is the smallest and most compressed package file.
• And if you are confused between ARM, ARM64, or x86 GApps package, refer to our guide:

1. Check which ARM, ARM64, OR x86 processor your Android phone uses.

• Install this GApps Pico variant from TWRP recovery. This time it will be installed without giving any TWRP error.
• Finally! This is how you can flash GApps Pico without getting an error.

Method 3: Using GApps config.txt

In this method, we’ll create a new Google Apps config text file and copy it into the GApps zip file.

Steps to Fix TWRP Error 70

• On your PC, create a text file.

• Rename that text file as gapps-config.

• Open that text file and write these lines in it:

Exclude Books
Exclude Slides
Exclude Sheets
Exclude Keyboard Google
Exclude Messenger
Exclude PixelIcons
Exclude Dialer Google
Exclude ExchangeGoogle
Exclude PlayGames
Exclude VRService
Exclude PixelLauncher
Exclude CloudPrint
Exclude Docs
Exclude NewsWidget
Exclude Camera Google
Exclude Google Contacts
Exclude Keep
Exclude Hangouts
Exclude Fitness
Exclude Chrome
Exclude Earth

• Save the text file.
• Extract the GApp.zip file on your PC.
• Now copy the gapps-config.txt file into the extracted GApp folder.
• Right-click the folder and select Add to archive.
• Select the zip format and click OK.
• Install this gapps.zip file from TWRP recovery. This time it will be flashed without giving any error.

Conclusion

Finally! This is how you can flash GApps without getting error code 70. I hope this helps you to successfully flash Google Apps on your Android device. Unfortunately, if you face any difficulty during this process, then please comment below.

Source: XDA

Checklist

• The issue is not answered by reading the FAQ
• The issue is part of The Open GApps Project scope (and not of the pre-built OpenGApps.org packages scope, for support on those see XDA Forum)

If Open GApps installation fails:

• Is the issue reproducible using the latest version of your recovery?
• Is the issue reproducible with (the latest) TWRP recovery? (other recoveries are only best-effort)

Issue description:
Open GApps installation fails with error 70 (Insufficient space on system partition)

Relevant snippet of open_gapps_log.txt (please note the strange text-values for sizes!)

         Total System Size (KB) | Filesystem
         Used System Space (KB) | 1K-blocks
        Current Free Space (KB) | Used

Reproduction Steps:
Latest TWRP already installed on both partitions A and B (currently: version 3.3.1-0.)

1. Activate partition A
2. Install custom ROM (e.g.: Resurrection Remix. This typically gets installed on the other partition, i.e.: B)
3. Activate partition B
4. Reboot into TWRP
5. Install OpenGapps (i.e.: on partition B)

Expected behavior:
OpenGapps installs without error.

Observed behavior:
Install fails with error 70

In-depth explanation

Relevant section of open_gapps_log.txt:

                    Device Name | jasmine_sprout
                   Device Model | Mi A2
                    Device Type | phone
                     Device CPU | arm64-v8a,armeabi-v7a,armeabi
          Device A/B-partitions | true
             Installer Platform | arm
                   ROM Platform | arm64

My Device is a A/B partioned device. This gets detected correctly and installer.sh sets SYSTEM_MOUNT to /system.
But: on my device, /system_root is relevant instead of /system.
(FYI: /system exists but is empty and not mentioned in /etc/fstab)
This somehow leads to df=$(df -k $SYSTEM | tail -n 1); to /only/ return this line:
Filesystem 1K-blocks Used Available Use% Mounted on

Interestingly, after starting the custom ROM and then rebooting into TWRP, df -k /system works as expected!

The CyanogenMod or Lineage OS open-source project does not have permission to install the Google apps (Gapps) while flashing the firmware. Before 2009, CyanogenMod came with preinstalled Google apps. But later on, Google asked CyanogenMod founder to stop including Gapps in CM ROM. The reason was that CyanogenMod could be installed on devices that do not have a license to have Google apps. So for days development of CyanogenMod ROM was stopped. The Internet was full of Android users with hearts full of hatred for Google. Then an alternate method was found to introduce Google Apps in CM. The technique was to flash the Gapps on your own. While flashing, you might encounter many errors; one of the most common is error 70 while installing gapps. In this guide, we will deal with how to fix this error.

Installing Gapps on an Android phone is the same as installing a custom ROM. First, you have to flash it using a custom recovery. Use this guide if you don’t know how to flash custom ROM and Gapps on an Android phone. Now moving on to the solution of getting Error 70 while installing gapps.

A few weeks back, I was flashing custom ROM on my Android phone. I flashed the firmware, and when it came to flash, Gapps. An error occurred.

It was Error 70: Insufficient storage space available in the system partition. (This error is pretty common while flashing gapps, so don’t worry).

After spending a lot of time, I figured out its solution. One solution is re-formatting the system partition and increasing its size. However, it is troublesome and technical and can get your phone bricked. If the below method doesn’t work for you, you could use this guide to increase the system partition of your Android phone.

The other solution I came across is straightforward; anyone who can flash custom ROM can do this.

The solution is simple. Get the smallest package of Google Apps (pico) and flash it in your system.

Follow the steps below if you don’t know how to get the Pico package for your custom ROM.

• Go to OpenGapps.
• Select Pico Variant. It will give you all the Google Play Services and a few Google Apps. It is small and good enough for your phone to perform background google android services. If you want other Google apps, you can later install them from Google Play Store or APK file.
• Select the Appropriate Platform/Architecture of your System. (If you are unsure about your phone architecture, refer to this guide.)

If you don’t understand the terms used in the guide above, then match up the terms below with your phone’s architecture:

• ARM: ARMv7 or armeabi.
• ARM64: AArch64 or arm64.
• x86: x86 or x86abi.

Consider the following details of CyanogenMod before selecting appropriate Google Apps:

• CyanogenMod 13: It is an AOSP of Android 6.0 Marshmallow.
• CyanogenMod 12.1: It is for Android 5.1.
• CyanogenMod 12: It is for Android 5.0.
• CyanogenMod 11: it Is for Android 4.4.

I hope the above solution helps you to fix error 70 while installing gapps on your Android phone. If you have any other error while installing custom ROM or gapps on your Android phone, let me know in the comments. You can also share any other solution to this error 70 while installing gapps. Do give us feedback if the above solution works out for you.