Содержание
- WinKFP error 211 Solutions
- Here I collect possible reasons,you need to check one by one.
- Thread: Error 211 on winkfp
- Error 211 on winkfp
- ERROR 211 ON WINKFP
- ERROR 211 ON WINKFP
- Method to Solve BMW ICOM A2 WinKFP Error 211 on Flash Programming
WinKFP error 211 Solutions
Sometimes winkfp error 211 occurs when you flashing a module,and flashen is aborted.Here I write this article to share you with solutions of how to solve WinKFP error 211.
Below picture show the WinKFP error 211.
Here I collect possible reasons,you need to check one by one.
1.Check WinKFP Configuration,and make sure you have configured it as below picture shows.
2.You need to reprogrammed mdules on the MOST bus by ICOM.If you use K+DCAN cable to reprograme,it maybe occur 211 error.
3.Just code both modules to default. You can use any profile which has manipulation disabled.
4.Make sure your car plugged to power supply to maintain proper voltage.
5.You need to code both units and then align.This can be done via ncs and inpa.When units are virgin chassis is written at time of coding.
6.Below show two config files,please replace those two files(backup yours) with those and try whether it is working.(before repalcing,pls save your original files)
Источник
Thread: Error 211 on winkfp
Thread Tools
Error 211 on winkfp
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear
i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v
so can anyone give me some help what i have to do ?
thank you so much
Try updating again using an earlier DATEN file.
solved . just use icom with istap and will work again ok
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear
i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v
so can anyone give me some help what i have to do ?
thank you so much
Sorry to revive the old thread, but I am having a similar issue and I’d like to know more detail on how you resolved this.
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear
i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v
so can anyone give me some help what i have to do ?
thank you so much
Last edited by lalaura; 11-24-2015 at 11:45 PM .
Источник
ERROR 211 ON WINKFP
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear
i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v
so can anyone give me some help what i have to do ?
thank you so much
solved. just use the icom with ista-p and will work ok
(06-24-2015, 11:30 AM) XALLECS Wrote: I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear
i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v
so can anyone give me some help what i have to do ?
thank you so much
Источник
ERROR 211 ON WINKFP
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear
i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v
so can anyone give me some help what i have to do ?
thank you so much
solved. just use the icom with ista-p and will work ok
(06-24-2015, 11:30 AM) XALLECS Wrote: I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear
i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v
so can anyone give me some help what i have to do ?
thank you so much
Источник
If you met the problems of BMW ICOM A2 software Winkfp flash programming error 211, you can have a look at the methods provided by forum members. Maybe they are useful.
problems
Both modules from the BMW dealership comes With VIN & Part Number already programmed in them but when use INPA to read the UIF block, the Part Number only showed up but not the VIN. Number, in its place is all yyyyyyy.
How to use WinKFP to program both the CAS & DME to facilitate a starting the engine for BMW E60?
Tools used here: BMW ICOM A2
Laptop with windows XP
Possible solutions from forums:
Note:
Opinion 1
You only need to code both units and then align. This can be done via NCS and INPA. When units are virgin chassis is written at time of coding.
Opinion 2
Just code both modules to default. You can use any profile which has manipulation disabled.
Opinion 3
Modules on the MOST bus should be reprogrammed with an ICOM interface and not a K+DCAN cable.
Opinion 4
You should be able to successfully reprogram it with ISTA/P and an ICOM interface.
Opinion 5
Check your Winkfp configuration, make sure it looks like this
Opinion 6
Didn’t have the power supply connected with the right Volts.
Notice!
The information provided here are for information only as they were all taken at random sites on the internet and can be accessed publicly. You should be aware that I have no responsibility for what may happen to your car and any change to be held occur solely at your own risk.
Источник
|
05-20-2015, 12:52 PM
|
#1 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Winkfp error 211 What’s up guys upon trying to flash my transmission to alpina b3 software I’m getting error 211 any ideas ? Thanks |
|
05-20-2015, 04:37 PM
|
#2 |
|
Captain
Drives: 335 M-SPORT COUPE Join Date: Nov 2008 Location: Brisbane Australia |
Try this it worked for another person with error 211 What to do? Through all of my web searches, I found that the default setting of WINKFP is «0» for both API Tracelevel and IFH Tracelevel (This is found under configuration)…I had changed these both to «1» per the initial setup instructions (Everything else the same as first post screen shot). Without any options I desperately change these two items back to the default «0». Press the «Program» — it then wrote perfectly FIRST time!!! Whoo Hooo! __________________ THE BEAST MHD Flash Tune /M3 suspension/Forge Intercooler/Alpina B3 AT Flash/Bilstein B4 Suspension/BMW OEM M3 Steering Wheel and DCT Paddles/LUX V4 Angel Eyes/CIC Retrofitted |
|
05-20-2015, 07:06 PM
|
#3 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Quote: Originally Posted by chappy Try this it worked for another person with error 211 What to do? Through all of my web searches, I found that the default setting of WINKFP is «0» for both API Tracelevel and IFH Tracelevel (This is found under configuration)…I had changed these both to «1» per the initial setup instructions (Everything else the same as first post screen shot). Without any options I desperately change these two items back to the default «0». Press the «Program» — it then wrote perfectly FIRST time!!! Whoo Hooo! Tried that still getting the same error |
:|
05-21-2015, 04:09 AM
|
#4 |
|
Captain Drives: 320d 2012 Join Date: Dec 2013 Location: AS |
Can you communicate with your car at all? Did you try to read codes using INPA? |
|
05-21-2015, 04:49 AM
|
#5 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Quote: Originally Posted by cryptomit Can you communicate with your car at all? Did you try to read codes using INPA? Yes which is what has me confused |
|
05-21-2015, 05:30 AM
|
#6 |
|
Captain Drives: 320d 2012 Join Date: Dec 2013 Location: AS |
What is the production date of your car? Month and year. |
|
05-21-2015, 06:46 AM
|
#7 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Quote: Originally Posted by cryptomit What is the production date of your car? Month and year. 9/08 |
|
05-21-2015, 07:37 AM
|
#8 |
|
Captain Drives: 320d 2012 Join Date: Dec 2013 Location: AS |
What cable do you have? Can you PM me a photo? |
|
05-21-2015, 07:42 AM
|
#9 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Quote: Originally Posted by cryptomit What cable do you have? Can you PM me a photo? KCRIUS(TM) K+D CAN USB Interface OBD2 Cable Diagnostic Scanner for BMW only https://www.amazon.com/dp/B008KZDDGA…_BqCxvb0J7WPQ5 This same one here I can send you a pic when I get home later |
|
05-21-2015, 07:43 AM
|
#10 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
As a matter of fact I cannot pull my transmission codes from inpa but I can read my uif in winkfp |
|
05-21-2015, 07:49 AM
|
#11 |
|
Captain Drives: 320d 2012 Join Date: Dec 2013 Location: AS |
Hmmm, this cable shouldn’t work properly with your car. Can you check latency set on Serial Port COM? It should be set to 1. |
|
05-21-2015, 07:51 AM
|
#12 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Quote: Originally Posted by cryptomit Hmmm, this cable shouldn’t work properly with your car. Can you check latency set on Serial Port COM? It should be set to 1. For some reason when I check the com port settings on windows 8 it only allows me to set the com port to 1 there is not latency setting, which I find odd because when I tried to set it up on a windows 7 laptop the setting to adjust the latency was present |
|
05-21-2015, 07:57 AM
|
#13 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Quote: Originally Posted by cryptomit Hmmm, this cable shouldn’t work properly with your car. Can you check latency set on Serial Port COM? It should be set to 1. I’m attempting to flash a transmission that I took out of an 08 a/t 135i same year build within a couple months apart. Basically when I start the car the transmission is locked into safe mode because only 3rd gear is available neutral and reverse if I try to change gears with paddles or ds mode I notice the gears on the dashboard go up as in switching then just drop back down to 3rd. My theory is that the 135 software is written to the mcm so I’m trying to flash it to the alpina version to see if it’s a go. |
|
05-21-2015, 08:17 AM
|
#15 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
I hope so I’ll give it a go when I get home. |
|
05-22-2015, 09:27 AM
|
#16 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Didn’t work I’m getting this error Error 211: Error on Flash programming |
|
05-22-2015, 09:57 AM
|
#17 |
|
Captain Drives: 320d 2012 Join Date: Dec 2013 Location: AS |
I assume that you have wrong cable. |
|
11-22-2016, 04:26 PM
|
#18 |
|
New Member
Drives: 2009 E92 335i xdrive Join Date: Apr 2015 Location: Kentucky |
Quote:
Originally Posted by SlimE92 Didn’t work I’m getting this error Error 211: Error on Flash programming Did you figure this out? I’m running into the same issue while flashing. |
|
11-22-2016, 05:14 PM
|
#19 |
|
Captain
Drives: E92 N54 Join Date: Apr 2014 Location: Queens NY |
Quote:
Originally Posted by phv628 Quote:
Originally Posted by SlimE92 Didn’t work I’m getting this error Error 211: Error on Flash programming Did you figure this out? I’m running into the same issue while flashing. Nope gave up. I’m going to order the proper cable and try again soon on a new laptop. |
|
01-11-2019, 02:56 PM
|
#20 |
|
Registered Drives: BMW 328i 2007 Join Date: Jan 2019 Location: Mexico |
Hi, did you try it again with the new cable and it works? |
|
01-14-2019, 11:44 AM
|
#21 |
|
Registered Drives: BMW 328i 2007 Join Date: Jan 2019 Location: Mexico |
Quote:
Originally Posted by SlimE92 Nope gave up. I’m going to order the proper cable and try again soon on a new laptop. Which is the proper cable? It depends on the software version and the model &year of the car? How can I choose the correct one? I have the same code 2089 while flashing with an 328i from 2007. Thanks |
|
01-14-2019, 11:46 AM
|
#22 |
|
Registered Drives: BMW 328i 2007 Join Date: Jan 2019 Location: Mexico |
Quote:
Originally Posted by cryptomit I assume that you have wrong cable. Which is the proper cable? It depends on the software version and the model &year of the car? How can I choose the correct one? I have the same code 2089 while flashing with an 328i from 2007. Thanks |
-
Error 211 on winkfp
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a gear i was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5v so can anyone give me some help what i have to do ?
thank you so much
-
Try updating again using an earlier DATEN file.
-
solved . just use icom with istap and will work again ok
Originally Posted by xallecs
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a geari was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5vso can anyone give me some help what i have to do ?
thank you so much
-
Sorry to revive the old thread, but I am having a similar issue and I’d like to know more detail on how you resolved this.
-
Originally Posted by xallecs
I recently get a car a z4 with a problem a friend of mine tried to update the transmision EGS with winkfp and afther 100% it was get an error
Error 211: Error on Flash programming
Error 211 «Signature check failed
the car start but it is imposible to get in a geari was try to update again via winkfp with a machine that i was able to do some trasmision update but not luck afther 100% same error
the sp daten is 2014 and the car is 2012-2013
i was do it with a stable source power so all the time is betwen 14v-14.5vso can anyone give me some help what i have to do ?
thank you so muchuseful solution for winkfp error 211 here:
http://obd2-diag.blogspot.com/2015/1…11-solved.htmlhope this helps
Last edited by lalaura; 11-24-2015 at 11:45 PM.
Originally Posted by xallecs
Here is a great collection about WinKFP for BMW ICOM A2. With this post, you can find the solutions for all kinds of WinKFP error, including Error 209, Error 211, Error 106, Error 806.
Error 209: UIF can not be read
Im trying to update my e46 updated my sp daten to v41
after clicking zb prog update in winkfp
i get Error 209: UIF can not be read
Solution:
The problem is the IFH-0018 error. Check EDIABAS.ini and ensure that the “interface=****” is appropriately configured for the interface type you are using. You also need to ensure that the DATEN files you are using are compatible with the version of EDIABAS you are running.
. Error 211: error 211 on flash programming
i was going to program my FRM using winkfp and i got this error and i dont know what it is please I need HELP!!
Error 211 on flash programming!
Solution:
check your winkfp configuration
make sure it looks like this
the 211 it was because i didn’t have the power supply connected with the right Volts.
. Error 106: error on setting ECU Adress
Solution:
I choose confort mode enter zub mine was 9204527 for frm2 then I enter vin click ok then zub update click done after that send me to other window and I hit prog.zub update and program successful! Then exit winkfp.
FRM is programmed correctly.
. Error 806: error on deleting assembly line data
I’ve got the cable from www.worldobd2.com like instructed by a few members in the DIY thread and installed INPA, DIS, winKFP and downloaded both V41 and V46 Data files for e60. Followed all of the instructions to a T in terms of installing software from the discs provided by the seller I got the cable from. When I do the assembly line import though into winkfp – I get this error message ( error 806 “deleting assembly line data”) with either V41 or V46 data files. It gets to about 94% of completion and then it stops .
Solution:
Try finding a Windows XP computer and install the BMW programs on it. It seems that anything higher than XP can sometimes run into issues with programming.
Hope it helps you out.